Service & Maintenance

Transcription

1 TA- Basic Loader Parts 0 TA- / TA- LOADER TOWER REPLACEMENT PARTS NBT-AS - L TOWER (LEFT) NBT-AS - R TOWER (RIGHT) -- NAT-0COM - R SLIDE LOCK COMPLETE (RIGHT) * -- NAT-0COM - L SLIDE LOCK COMPLETE (LEFT) * NAT-0AS - R SLIDE LOCK (RIGHT) NAT-0AS - L SLIDE LOCK (LEFT) NAT-0 - L DROP LOCK (LEFT) NAT-0 - R DROP LOCK (RIGHT) CBF00 /" X /" CARRIAGE BOLT NAT-0 BAR CLAMP BOLT HTN0 /" LOCK NUT 0 HHS00 /" X /" BOLT LWM0 /" LOCK WASHER 0H0 FRONT WRAP ** NAF- PIN DRP0000 DOUBLE ROLL PIN NAT- RIVET RLG- SPRING NOTE: *NAT-0COM - R contains (), (), (), (), (), (), (). NAT-0COM - L contains (), (), (), (), (), (), (). **Varies by tractor (Standard Front Wrap is 0H0). WESTENDORFMFG PWB0 WESTENDORF MFG CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

2 TA- Basic Loader Parts 0 TA- LOADER FRAME REPLACEMENT PARTS REF # PART # DESCRIPTION QTY NBF-AS FRAME NAF-AS LINKAGE CONNECTOR NAF-0 BUCKET PIVOT NAF-0AS BUCKET PIVOT LMF-AS PIVOT PIN LMF-AS ROUND HEAD PIN NAF-AS BUCKET CYLINDER PIN LF- LIFT PIN DRP0000 DOUBLE ROLL PIN REF # PART # DESCRIPTION QTY 0 NAF-AS GAUGE ROD HOLDER PIN LMF-AS GAUGE ROD HOLDER LMF-AS GAUGE ROD DRP0000 DOUBLE ROLL PIN NAF- PIN HEAD SR-C0 SNAP RING SR-C0 SNAP RING ZER0 GREASE FITTING WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH:() - FAX: () -0 sales@westendorfmfg.com

3 TA- Buckets and Couplers TA- / TA- BUCKET Q " BUCKET 0Q 0" BUCKET CB- " BLADE UB- 0" BLADE SB- BLADE QC-AS WELD ON ADAPTER JB- GUIDE (OPTIONAL) NOTE: *Check width of the bucket and use the part number that matches. If your size is not shown, contact Westendorf Mfg. Co. TA- / TA- SNAP-ATTACH COUPLER (C-) QC-0COM MALE COUPLER COMPLETE QC-0AS MALE COUPLER HHS00 /" X " BOLT QC-AS LATCH HANDLE HTN0 /" LOCK NUT QC- LATCH QC- SPRING RLP00000 /" X /" ROLL PIN QC- BOTTOM LATCH PIN 0 QC-0AS LINKAGE PIN LF- LINKAGE PIN DRP0000 DOUBLE ROLL PIN DRP0000 DOUBLE ROLL PIN 0 NOTE: Qty. shows number of parts received if ordered using listed part numbers. C- is two(qc-0com) couplers. TA- / TA- COSMETICS DEC- DECAL KIT (TA-) DEC- DECAL KIT (TA-) V--A BLACK SPRAY PAINT V-0-A RED SPRAY PAINT REF # PART # DESCRIPTION QTY V--P PINT BLACK PAINT V--Q QUART BLACK PAINT V--G GALLON BLACK PAINT NOTE: Warning decals are available at no charge. If they become damaged or missing, order part numbers DE-SS, DE-WLD-A, DE-WLD-A, DE-LD, DE-PP, DE-QCC. WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

4 TA- Bucket Cylinder STEPS TO REPAIR CYLINDER ) At the ram end of the cylinder barrel, remove the spiral retaining ring from the top of the gland. NOTE: The G-E gland does not use the spiral retaining ring. ) Gently drive the gland into the barrel using a brass or nonmarring punch until the round retaining ring is visible. ) Remove the round retaining ring using a pair of long nose pliers. Remove the ram assembly (ram, gland, and piston) from the barrel. ) Notice the direction they're pointing so they can be properly re-assembled. ) Remove the jam nut and/or hex nut from the end of the ram. ) Remove the old seals and rings and replace them with the new seals and rings. (Seal kits are packaged for several different cylinders. You may have extra parts) ) Clean cylinder with cleaner and a clean lint free cloth. ) Lubricate the seals and rings to aid assembly. ) Assemble the cylinder by reversing the order. CYLINDER REPAIR TIPS When disassembling cylinders, keep the parts in correct orientation. Remove parts in sequence. Note the direction of the piston and gland. Lay out old seals and parts as they are removed. Assemble cylinder in proper order; lubricate to aid assembly. TA- / TA- BUCKET CYLINDER REPLACEMENT PARTS B- BUCKET CYLINDER B-0 BARREL B-0 RAM G-L GLAND P-B PISTON HFN " NUT ZER0 GREASE FITTING #CK REPAIR KIT * NOTE: * Repair kit contains parts to repair one cylinder WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

5 TA- Lift Cylinder STEPS TO REPAIR CYLINDER ) Extend the ram out as far as possible. ) At the ram end of the cylinder barrel remove the hex cap. ) Remove the ram assembly (ram, gland, & piston) from barrel. ) Notice the direction they're pointing so they can be properly re-assembled. ) Remove the jam nut and/or hex nut from the end of the ram. ) Remove the old seals and rings and replace them with the new seals and rings. (Seal kits are packaged for several different cylinders. You may have extra parts) ) Clean cylinder with cleaner and a clean lint free cloth. ) Lubricate the seals and rings to aid assembly. ) Assemble the cylinder by reversing the order. CYLINDER REPAIR TIPS When disassembling cylinders, keep the parts in correct orientation. Remove parts in sequence. Note the direction of the piston and gland. Lay out old seals and parts as they are removed. Assemble cylinder in proper order; lubricate to aid assembly. TA- STANDARD " LIFT CYLINDER REPLACEMENT PARTS L- LIFT CYLINDER L-0 BARREL L-0 RAM L- HEX CAP G-D " GLAND P-B PISTON HJN " JAM NUT HFN " NUT ZER0 GREASE FITTING 0 #CK REPAIR KIT * NOTE: * Repair kit contains parts to repair one cylinder WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

6 TA- Optional Lift Cylinder STEPS TO REPAIR CYLINDER ) Extend the ram out as far as possible. ) At the ram end of the cylinder barrel you will find a snap ring located either on the face or inside the notch of the gland. ) Locate the snap ring eyes (you may need to turn the gland inside the barrel to find the snap ring eyes). Compress the snap ring with snap ring pliers. ) Remove the ram assembly (ram, gland, & piston) from barrel. ) Notice the direction they're pointing so they can be properly re-assembled. ) Remove the jam nut and/or hex nut from the end of the ram. ) Remove the old seals and rings and replace them with the new seals and rings. (Seal kits are packaged for several different cylinders. You may have extra parts) ) Clean cylinder with cleaner and a clean lint free cloth. ) Lubricate the seals and rings to aid assembly. 0) Assemble the cylinder by reversing the order. CYLINDER REPAIR TIPS When disassembling cylinders, keep the parts in correct orientation. Remove parts in sequence. Note the direction of the piston and gland. Lay out old seals and parts as they are removed. Assemble cylinder in proper order; lubricate to aid assembly. TA- OPTIONAL /" LIFT CYLINDER REPLACEMENT PARTS L- LIFT CYLINDER L-0 BARREL L-0 RAM G-R GLAND P-I PISTION HJN " JAM NUT HFN " NUT ZER0 GREASE FITTING #CK SEAL KIT * NOTE: * Repair kit contains parts to repair one cylinder WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com

7 TA- Hydraulics 0 TA- HYDRAULICS PF-FFC FEMALE CONNECTOR PF-FSBT SWIVEL NUT TEE OH- OIL LINE HOLDER HTN0 /" LOCK NUT H000-FF /" X 0" HOSE OLT-0 OIL LINE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE 0 OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE OLT- OIL LINE OH- OIL LINE PROTECTOR BAND- METAL BAND GP- MANUAL CANISTER EC-M0 SELF TAPPING SCREW WESTENDORFMFG PWB0 WESTENDORF MFG. CO., INC. PH: () - FAX: () -0 sales@westendorfmfg.com