MC range and accessories
|
|
- Erick Shaw
- 5 years ago
- Views:
Transcription
1 odular clamping equipment pag. range and accessories X pag S- pag xtension element ouble support with jaws pag pag. omplete extension element pag ase with fixed support with jaws pag. ase with double support with jaws pag VS- pag VS- VS- pag. pag Accessories Spare parts pag. pag
2 is... odular We use the true definition of the term modular; product which is composed of separate or separable elements. With these separate or separable elements we can achieve many different clamping solutions. The only different component of these clamping solutions is the base. The base length determines the clamping capacity while all other components remain the same. ixed and movable vise jaws can be used with any base configuration, offering the most flexible workholding solutions available. This modular system allows the user to realize the maximum number of workholding combinations with the minimum investment in equipment. urability All components are constructed from oversize steel profiles ensuring the equipment is exceptionally sturdy and can provide the user with optimal performance. Wear parts are special treated to achieve a surface hardness of /60 R. All non-ground surfaces are burnished to protect against corrosion. Quick-change A patented system allows quick repositioning of the clamping jaws. The clamping jaw is lifted slightly from the base and shuttled to the next clamping position then lowered into place. Part changeovers and size changes can be made quickly and easely. Versatility The standard AK system allows the quick-change of parallels, angular parallels, soft jaws and V jaws in order to machine any workpiece. anageable The weight of 25 kg (55 lb.) for the. x. (6 x 8 ) vise and simple clamping system allow for easy movement from one machine tool to another
3 clamping equipment 3.1 lamping equipment complete with wrench, work stop, rigid slide way ( floating slide-way at request for raw workpiece), pair of positioning keys, pair of AK parallels, cover for protection of the screw, cardboard box. A S ø type A G O S weight kg x , ,5 x , ,5 x , , x , x ,
4 -X clamping equipment lamping equipment -X complete with wrench, work stop, rigid slide-way, (floating slide-way at request for raw workpiece), pair of positioning keys, pair of AK parallels, cover for protection of the screw, cardboard box. A S ø x 545 x 655 A G S Weight kg , , =
5 double clamping equipment S- 3.1 ouble clamping equipment S- complete with: 1 wrench, 2 work stops, 2 rigid slide-ways, (floating slide-way at request for raw workpiece), 1 pair of positioning keys, 2 pair of AK parallels, 2 covers for protection of the screw, cardboard box. A T A S ø x x 2 A G 12,5 12, S T Weight kg The modularity of the system combined some other component offers many additional clamping solutions. + =
6 clamping moduls extension element with pair of positioning keys S ø x x G 12,5 12, S weight kg 8 double fixed support with jaw T x x 70 G 12 T weight kg 5 15 complete extension element with pair of positioning keys A S ø A G 12,5 12, S weight kg 14,5 34,
7 clamping moduls base with fixed support with jaw complete with pair of positioning keys 3.1 A S ø A G S weight kg , , , base with double fixed support with jaw complete with pair of positioning keys T S ø G 12,5 12, S T weight kg 13 Working examples see pag
8 VS- Vertical clamping system complete with: 4 clamping equipment 1 column 1 base for vertical system 4 pair of AK parallels 4 covers for protection for the screws odular Vertical lamping System 4 rigid slide-ways (floating slide-ways on request for raw work pieces) 4 work stops 4 wrenches eye bolt for lifting, wooden packing case A x x 2 x x x 2 x x A weight kg Working examples see pag
9 modular vertical clamping systems VS N P weight kg nsert for vertical use
10 VS- odular Vertical lamping System ross Vertical clamping system complete with: 4 clamping equipment 1 cross cube 4 pair of AK parallels 4 covers for protection for the screws 4 guided slide-ways ( floating slide-ways on request for raw workpieces) 4 work stops 4 wrenches eye bolt for lifting wooden packing case A A weight kg x x x x x x x Working examples see pag
11 A T A G odular Vertical double lamping Systems Vertical clamping system complete with: 4 double clamping equipment 1 cross cube X 8 pair of AK parallels 8 covers for protection for the screws VS- 8 guided slide-ways ( floating slide-ways on request for raw workpieces) 8 work stops 8 wrenches eye bolt for lifting wooden packing case VS - x A G T 103 Weight kg 680 Working examples see pag
12 VS- Vertical lamping Systems ross cube for VS- ross cube for VS- weight kg VS- x weight kg nsert for vertical use VS - VS
13 accessories for clamping equipment Pair of grooved jaws x x nsert for vertical use (VS, VS, VS) Torque wrench x x Air/oil block complete with cylinder and tang x x Air/oil foot pump with joining pipe cm. 0 (71 ) and complete block for air/oil application x x Air/oil foot pump x x
14 accessories for clamping equipment Air/oil manual pump x x Pressure - gauge with graduated scale in Kg x x oining pipe. 1,80 (71 ) cod x x oining pipe. 3 (1 ) x x oining pipe. 6 (236 ) x x
15 accessories for clamping equipment 3.1 Pair of clamps complete with screw and T nuts T for T x x Pair of nuts complete with screws at 45 T cod. for T x x Pair of positioning key with special dimensions T h od for T x x
16 accessories for clamping equipment escription 01...ase 02...ixed support 03...ovable support aw loating slide-way 06...Rigid slide-way 08...lamping screw 10...ontrast pin Positioning plate 12...lock for clamping screw 13...Positioning key Key for support Wrench 28...over for protection of the screw 38...Pair of AK parallels... Work stop 83...ardboard box Rubber pad Screw T Screw T Screw TPS Screw TPS Screw TPS Screw T Screw T
17 spare parts for clamping equipment Pair of smooth jaws x x ixed support with jaw x x ovable support with jaw x x loating slide-way x x Rigid slide-way x x
18 spare parts for clamping equipment Pair of keys for fixed suport x x Wrench x x omplete clamping block (new type) x x lock for clamping screw (new type) x x 3.1.
19 spare parts for clamping equipment lamping screw (old type) x x lamping screw (new type) x x ronze bushing (old type) x x ontrast pin (old type) x x ontrast pin (new type) x x Positioning plate (old type) x x
20 spare parts for clamping equipment Positioning plate (new type) x x Pair of standard positioning keys T h x x T h6 Work stop x x over for protection of the screw x x lock for cylinder x x
21 spare parts for clamping equipment Tang for cylinder x x an of oil x x
22
Modular clamping equipment MC range and accessories
odular clamping equipment range and accessories pag. 90 -X pag. 91 S- pag. 92 Touchdex pag. 93 3 xtension element pag. 96 ouble support with jaws pag. 96 omplete extension element pag. 96 ase with fixed
More informationTC range and accessories
Modular clamping equipment Tt pag. T range and accessories Tg. 6 pag.. 7 Tt-X pag.. 8 S-Tt pag.. 9 xtension element Tt pag.. 1 omplete extension element Tt pag.. 18 Accessories T pag.. 13 ase with fixed
More informationCIVI Multiple clamping system. CIVI 2000 base set pag. 72. CIVI 2000 movable jaw set pag Movable jaw set with aluminium jaws pag.
ultiple clamping system IVI 2000 IVI 2000 base set pag. 72 IVI 2000 movable jaw set pag. 73 2 ovable jaw set with aluminium jaws pag. 74 IVI 2000 accessories pag. 76 V IVI 2000 pag. 78 olumn IVI 2000/Touchdex
More informationNCN 9.2. Clamping vise with mechanical/mechanical clamping force multiplier NCN MVS-NCN CLAK NCN. Accessories NCN. Spare parts NCN.
lamping vise with mechanical/mechanical clamping force multiplier pag. 9.2. 2 lamping vise V- pag. 9.2. 8 odular vertical system K pag. 9.2. 14 odular parallels/quick change ccessories pag. 9.2. 15 pare
More informationDUO-LOCK. Double clamping equipment DUO-LOCK HD. Set of hard jaws. Set of soft jaws. Conversion kit for single clamping. THD tower DUO-LOCK HD
Double clamping equipment DUO-LOK HD Pag. 10.3 DUO-LOK base equipment DUO-LOK HD with wrench 10 Set of hard jaws Pag. 10.3 Set of soft jaws Pag. 10.3 onversion kit for single clamping Pag. 10.9 THD tower
More informationCONVENTIONAL WORKHOLDING
simple. gripping. future. CONVENTIONAL WORKHOLDING 1 Avanti Quick Jaw Exchange System 14 Avanti 46 16 Avanti 18 Avanti 11 Profilo Contour Jaw System 112 Profilo 113 Profilo 114 Profilo Dual clamping vice
More informationQUICK-CHANGE 5-AXIS WORKHOLDING
QUICK-CHANGE 5-AXIS WORKHOLDING THE 5-AXIS WORKHOLDING SOLUTION Top Tooling Connect directly to the Quintus Quick-Change Riser Blank Fixture Plate 5-Axis Vise Multifunction Fixture Plate Quintus Quick-Change
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationMINING & DRILLING PRODUCTS. N2U Core Retrieval System
MINING & DRILLING PRODUCTS NU Core Retrieval System CORE BARREL ASSEMBLY, NU -0-009 Core Barrel Assembly, 0 ft (.0 m)* -0-009 Core Barrel Assembly, ft (. m)* -0-009 Inner Tube Assembly, 0 ft (.0 m)* -0-009
More informationHFB Steering Gear Service Manual
TRW Automotive Commercial Steering Systems HFB Steering Gear Service Manual HFB64 SERIES Die Cut HFB64 Integral Hydraulic Power Steering Gear This steering gear was specifically designed for motor trucks;
More informationH Core Retrieval System
H Core Retrieval System Global Drilling Products Pte Ltd 9 Loyang Way, #0-0, Changi Logistics Centre Singapore 0 Telephone: + 9 info@globaldrillingproducts.com www.globaldrillingproducts.com Core Barrel
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationSPV CMV-R MMV CMV-S PCV APV PSV PLV DDV MDV 222P 234P 236P 223P 224P 238P 226P 240P 228P 230P 232P 233P. Flexible Vise. Serration type.
VISE SPV Serration type Power 222P FV Flexible 234P CMV-R Self centering 5-Axis 223P VS Standard Machine 236P CMV-S Self centering 5-Axis 224P MMV Mechanical Machine Quick 238P PCV Standard Power 226P
More informationNew Products 10/2018. New EOAT Components
New Products 10/2018 New OT omponents Tubular Remarks The brochure has been created with the most possible diligence. ll details are based on experiential determined values, accurate calculations, and
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationPIPE HANDLING & HOISTING. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
PIPE HANDLING & HOISTING MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com PIPE HANDLING & HOISTING TABLE OF CONTENTS PIPE HANDLING & HOISTING OVERVIEW... HOISTING PLUGS...-7
More informationDescription and operating instructions. TOUCHDEX indexing tables
TOUCHDEX Automatic mechanical indexing tables Description and operating instructions Pag.. 3 TOUCHDEX indexing tables Pag.. 8 COMBIDEX Pag.. 12 TILTING Pag.. 13 MULTIDEX Pag.. 14 Accessories Pag.. On our
More informationIndustrial Lifting Equipment
Industrial Lifting quipment Trolley and Tractor Selection Guide 1/2 20 metric ton Lifting apacity Ingersoll-Rand offers a wide variety of plain, geared or powered trolleys for use with the MLK and HLK
More informationMaintenance Information
16605958 Edition 2 May 2014 Air Percussive Rivet Buster Models 9001 and 11001 Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings,
More informationIDEAL FOR STATIONARY USE
IDEAL FOR STATIONARY USE The stationary power clamping devices from RÖHM are predestined for stationary, centric clamping of round and angular workpieces on milling machines or machining centers or for
More informationROYAL LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
ROYAL LOW-PROFILE ACCU-LENGTH High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because they are
More informationSection 6 Feet & Casters
atalog 1816-3/US ontents Section 6 155 Wadsworth, Ohio US atalog 1816-3/US Leveling Feet Leveling Foot 21-001 21-001-30 pplication 21-001 21-001-30 Series min max Max Load N (lbs) (g) 40 40 40 21-001 30
More informationGripper arms Content. Gripper arms at a glance Angle arms Elbow arms
Gripper arms ontent Gripper arms at a glance... 94 Angle arms... 95 Elbow arms... 101 www.fipa.com 93 Gripper arms At a glance FIPA Gripper arms, clamping diameter 10, 14, 20, 30 mm Angle arms, elbow or
More informationSUBITO -Precision Bore Measuring Instrument
Precision Bore Measuring Instrument for measuring internal diameters, application 4,5 00 mm SU/SK/SW SERIES 1 ANDARD VERSION SERIES SU w. inspection certificate Delivery: Holder, fixed measuring pins,
More informationService Kit
Service Kit 753-05607 Date: Subject: Models Affected: April 17, 2009 (Revised 6/08/2009) Hydraulic Cylinder Seal Replacement XINGHUI 4.5 Cylinder 718-0769A Read through and understand these instructions
More informationMINING & DRILLING PRODUCTS. B Core Retrieval System
MINING & DRILLING PRODUCTS B Core Retrieval System CORE BARREL ASSEMBLY, B -0-00 Core Barrel Assembly, 0 ft (.0 m) -0-00 Core Barrel Assembly, ft (. m) -0-00 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner
More informationDISASSEMBLY AND ASSEMBLY
211-02-1 Power Steering 211-02-1 DISASSEMBLY AND ASSEMBLY Steering Gear Special Tool(s) Holding Fixture, Transmission 307-003 (T57L-500-B) Special Tool(s) Installer, Worm Bearing Locknut 211-012 (T66P-3553-B)
More informationFiling frame Basic-Line
Filing frame Basic-Line The modular filing frame for office cabinets, safes and mobile trolleys. The filing frame Basic-Line provides a perfect cost-performance ratio. Its modular design allows an easy
More informationLB - LIGHTING BUSWAY 25-40A
16 LB - LIGHTING BUSWAY 25-40A LIGHTING BUSWAY SECTION CONTENTS 18 General features 24 Trunking components: 2 and 4 conductors elements 28 Trunking components: 6 conductors elements 30 Plugs 33 Fixing
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
Page 1 of 15 Wire terminal grips u All dimensions shown as IN [MM] For securing wire terminals, cables, connectors, and other samples for pull testing. ØA B C D G1001 0-0.125 [0-3.1] G1001-1 [1000] 0.29
More informationthe adaptable PrOFi V Cast OVErruN device introductory offer! Trailer ComponenTs QualiTy for life
Trailer ComponenTs QualiTy for life the adaptable PrOFi V Cast OVErruN device WOrld leading OVErruN technology FOr demanding trailer applications limited introductory offer! 3 Tonne Assembly 100 3.5 Tonne
More informationPrecision Lead Screws
Precision Lead Screws ov-precision_lead_screws_divider - Updated - 18-09-2017 163 Precision Lead Screws Technical Information Precision lead screws ov-precision_lead_screws_technical_info - Updated - 18-09-2017
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationFeatures EN/IEC Applications
PO Modular polyester boxes nsulated boxes Standards eatures ntro N/ 639- N/ 6059 N/ 608 pprovals - oxes with polyester cover: types 3, 3R,,, 6, 6P, and 3 - oxes with polycarbonate cover: types 3, 3R,,,
More informationErgonomic Handling Solutions. Vacuum Handling Systems Tube Lifters Jumbo and Lifting Devices VacuMaster
Ergonomic Handling Solutions Vacuum Handling Systems Tube Lifters Jumbo and Lifting Devices VacuMaster 53 Vacuum Tube Lifters Jumbo Introduction Application Fast and frequent lifting and moving of workpieces
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationConveyors 12. slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer
Conveyors slide strips roller Conveyors roller elements Conveyor rollers Chain Transfer Application example conveyors Transport solutions and goods provision 1 2 3 4 5 6 7 8 362 9 1 slide strips Low-wear
More informationANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationTechnical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 134 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 134
More informationHyundai Accent Atlantic 2006 model on Rear Parking Aid
Hyundai Accent Atlantic 2006 model on Rear Parking Aid KEY POINTS OF INSTALLATION Ensure that the sensor is installed with the dot in the 12 o clock position and that a keyway is cut in the bumper to accommodate
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More informationThe Finest Spindle speed
DESCRIPTION MODEL Distance between centers UNIT G5P-50M/NC 500(0 ) G3P/G38P(M&NC) 60M / NC 100M / 100NC 150M / 150NC 00M / 00NC 600(4 ) 1000(40 ) 1500(60 ) 000(80 ) SUPERTEC Since 1954 GENERAL Swing over
More information8000 AE 0 - AE 4 CIRCLIP PLIERS FOR EXTERNAL RETAINING RINGS
PLIRS RG Circlip pliers for external retaining rings (shafts) 8000 Flattened tip mounting makes it easier to get at the safety ring eyelets Precision, screwed joint. The screw ensures ease in re-adjusting
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More informationMINING & DRILLING PRODUCTS. N3 Core Retrieval System
MINING & DRILLING PRODUCTS N Core Retrieval System CORE BARREL ASSEMBLY, N - - 090 Core Barrel Assembly, 0 ft (.0 m) - - 09 Core Barrel Assembly, ft (. m) - - 09 Inner Tube Assembly, 0 ft (.0 m) - - 09
More informationAF / AFR Series. AFR Series
AF / AFR Series haracteristic Highlights Equipped with solid uncaged needle roller bearings, provides maximum contact points to increase stiffness and generates high output torque. True helical gear design
More informationDrive/Motor Disassembly: Assembly Instructions - Quick-Change Pencil Grinder. Header 1. xxxxxx
Disassembly/Assembly Instructions - Quick-Change Pencil Grinder, Drive & Motor Models: 60051, 60052 Important: Use these instructions along with tool parts page or manual. Notice: Shut off air supply.
More informationAutomatic Positioning System APS
Automatic Positioning System APS 0 MODULES pag. 0. 2 CLAMPING PINS pag. 0. 5 / 0. 8 PLATES pag. 0. 9 PLATES FOR 5 AXIS pag. 0. 13 ANGLE PLATE pag. 0. 21 TOMBSTONES pag. 0. 26 CRANKWEBS pag. 0. 30 STEEL
More informationPOWER CLAMPING.
www.jergensinc.com POWER CLAMPING Air Circuit Controls- 2-Hand No Tie Down....59 Booster Clamping Kit....49 Boosters, High Pressure/Volume....47 Booster Installation Kits....48 Boosters, Pre-Fill....44
More informationDISTRIBUTED BY: 8960 Evergreen Blvd. Minneapolis, MN PHONE: (612) FAX: (612)
SPECIFICATIONS AUTO-SERT SPECIF. AS-7.5/20 THROAT AS-10/20 THROAT AS-7.5/36 THROAT AS-10/36 THROAT TONNAGE CAPACITY Minimum 350 lbs. Minimum 350 lbs. Minimum 350 lbs. Minimum 350 lbs. Maximum 15,000 lbs
More informationRemoving Tool for stick-on weights
hassis Wheels Valve Tool Y& Removing Tool for stick-on weights Four-Way Rim Wrenches For installing and removing the valve inserts on aircraft landing gears 666-3 136346 Tire Tread Depth Gauge & For removing
More informationPower Workholding. Power Workholding n Precision Vises n Zero Point Mounting n Assembly and Handling
Power Workholding Power Workholding n Precision Vises n Zero Point Mounting n Assembly and Handling OUR STORY In 1982 an independent joint venture was established to marry the proven product expertise
More informationZERO-POINT CLAMPING SYSTEM
simple. gripping. future. ZERO-POINT CLAMPING SYSTEM 22 Quick Point Grid Plates 3 Quick Point Plates 34 Quick Point Round Plates 39 Quick Point Adaptor Plates 4 Quick Point Clamping Studs 43 Quick Point
More informationThe BVA Advantage. Confidence Built on Quality
1 The V dvantage V Hydraulics was launched in 2003 and is centrally located in the United States in Kansas ity, Missouri. V is one of the Shinn u of merica ompanies including; Hein-Werner, Omega Lift,
More informationAccurate Precision Machining R12/16/20 CNC VERTICAL LATHE ISO 9001
Accurate Precision Machining R12/16/20 CNC VERTICA ATHE ISO 9001 ABOUT RADAR Radar Industrial Co., td., established in 2007, has more than 50 years of experience in manufacturing professional machine tools
More informationNew HAZET Range of Pullers / Extractors
17 17 New HAZET Range of 2-Arm Pullers 3-Arm Pullers Hydraulic Pullers Ball Bearing Extractors Separators Internal Extractors Forged Quality Practical and Proven Tools New Innovative Range of Pullers For
More information1 Cylinder. 1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke. 2 - Cylinder Options. Cylinder Accessories
1 Type 30 06 T 2 3 4 5 apacity Stroke Options ode 1 - Type 3 - apacity 4 - Stroke ydraulic 2 - Options L LN LN P P T U U U ULN S/ - ollow ole / - eneral Purpose / - ollow ole / - igh Tonnage S/ - lat ody
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationPneumatic Axial Die Grinder also for Underwater Use Type , 0050
M a s c h i n e n f a b r i k G m b H Pneumatic Axial Die Grinder also for Underwater Use Type 1 5077 0010 0020, 0050 Illustration can differ from the original Repair Manual and Compiled: 18.07.11 150770010_0020_0050_Inst_en_Version_00
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationSwitch Stands and Components
Switch Stands and Components MODELS 50 AND MODELS 51 Model 51 stands are available in the low profile (Model 51A and intermediate profile (Model 51B). Rugged construction, ease of operation, and nearly
More informationGeneral Applications. Axle Types. d20 leaf spring lbs. capacity Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationRobo Trex Automation System
Robo Trex Automation System grip the future Automatically more efficiency The necessity of automated manufacturing Increasing competition, cost pressures and skills shortages are challenges which have
More informationFIXED GRIPPERS Page Number Part # Prefix ROUND STYLE QUICK INDEX
QUIK INDEX TG GRIPSERTS GRIPPER SYSTEM Page Number Part # Prefix TG GripSerts...8...TG Jaw Set / Retrofit / Kurt 6"...9...TGJ Screws and Protective overs...9...tg Screwdriver / Wrench / Accessories...9...TG
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationMarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments
+ MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments Indicator Stands MarStand 815 GN With Cast Iron Base MarStand 815 MA / 815 MB / 815MG / 815 P With Magnetic Base 8-2 8-3 Post
More information2001 Volvo V70 XC AWD L5-2.4L Turbo VIN 58 B5244T3
2001 Volvo V70 XC AWD L5-2.4L Turbo VIN 58 B5244T3 Bushing Control Arm, Replacing Bushing control arm, replacing Special tools: 951 2050 951 2923 999 5045 999 7032 999 7033 999 7035 999 7037 999 7048 999
More informationAir Champ RPM DPC-15T DPC-13T DPC-11T DPC-11T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T DPC-9T
DUAL PLATE FRICTION CLUTCH SELECTION CHART Friction clutch recommendation is based upon air pressure of 50 psi, transmitted horsepower and speed. RPM 100 200 300 400 500 600 700 800 900 1000 1100 1200
More informationINSTRUCTION MANUAL FOR ASSEMBLING/DISASSEMBLING
INSTRUCTION MANUAL FOR ASSEMBLING/DISASSEMBLING BLUE SERIES PUMPS INDEX Disassembling Blue90 pump Hydraulic section... 3 Opening the oil sump... 6 Removing the mechanical seals... 8 Removing ball bearings...
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationMaintenance Information
80234313 Edition 1 June 2006 Air Grinder, Die Grinder, Sander and Belt Sander Series G1 (Angle) Maintenance Information Save These Instructions WARNING Always wear eye protection when operating or performing
More informationSSP / SSH. Designs: Pneumatically operated (SSP) Hydraulically operated (SSH)
SSP / SSH chucks Technical features: Wedge system Quick and efficient chucking in stationary use Concentric gripping of round as well as angular parts Universal through use of different jaws Gripping force
More informationMaintenance Information
80234313 Edition 2 May 2014 Air Grinder, Die Grinder, Sander and Belt Sander Series G1 (Angle) Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 [1000] 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5]
More informationBaumann Series Flexsleev Control Valve Instructions
Instruction Baumann 86000 Series Instructions Baumann 86000 Series Flexsleev Control Valve Instructions Contents Introduction...1 Scope...1 Safety Precautions...1 Maintenance...2 Installation...3 Air Piping...3
More informationHard Seat Fluid Pressure Regulator
Instruction Sheet P/N 04742-02 Description The Nordson hard seat fluid pressure regulator is designed for use with abrasive coatings. The regulator body is constructed of stainless steel with a nickel-plated
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationAir Champ DPC-9T & DPC-11T Static Torque in Inch-Pounds. Air Pressure in PSI
CLUTCHES DPC SERIES DUAL PLATE CLUTCHES This Series, specified by component, allows you to custom design for specific application requirements: Static Torque capacity up to 36,000 In. Lbs. @ 80 psi Maximum
More informationRobbins 34RH. Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter
Robbins 34RH Low profile raiseboring machine for holes ranging from 0.6 to 1.5 m in diameter 1 Raising the bar in versatility The Robbins 34RH is a low profile, lightweight raise drill rig for holes of
More informationGeneral Applications. Axle Types D20 LEAF SPRING LBS. CAPACITY Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationGeneral Applications. Axle Types D20 LEAF SPRING LBS. CAPACITY Lbs. Capacity
General Applications Axle Types 1000-2200 Lbs. apacity omplete service manual eavy duty 1¹ ₁₆" spindle design Precision machined steel spindles and integral cast iron hub/drums SA approved 7" x 1¹ ₄" electric
More informationROBBINS 34RH C. Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter.
ROBBINS 34RH C Low-profile raise boring machine for holes ranging from 0.6 to 1.5 m (2-5 ft.) in diameter. RAISING THE BAR IN VERSATILITY THE ROBBINS 34RH C IS A LOW-PROFILE, LIGHTWEIGHT RAISE DRILL RIG
More informationPOWER CLAMPING. Power Clamping. Air-Powered Hydraulic Pumps
Power Clamping Repair Kits... 213 Rotary Couplers...208 Swing Cylinder Arms... 150 Swing Cylinder Bottom Flange... 149 Swing Cylinder Top Flange... 148 Tubing, Steel... 212 Valves, Air Circuit... 202 203
More informationClimax Valve Repair Machines
VM7000 VM6000 VM8000 Climax Valve Repair Machines descriptions specifications operational dimensions components CLIMAX Portable Machine Tools, Inc. 6/00 1 Model VM7000 Valve Boring Machine Now you can
More informationThis photo shows how versatile the platform Rex PF (fixed point) is for parking motor vehicles. It can even accommodate vehicles with heavy engines
44 REX PF 45 46 REX PF This photo shows how versatile the platform Rex PF (fixed point) is for parking motor vehicles. It can even accoodate vehicles with heavy engines and an extremely long wheel base
More informationPR HOFFMAN MACHINE PRODUCTS
PR HOFFMAN MACHINE PRODUCTS Innovations in Flatness 117 COMMERCE AVENUE, CARLISLE, PA, USA 1701 TEL: 1 717-243-9900 FAX: 1 717-243-442 WWW.PRHOFFMAN.COM Machines Overview PR Hoffman Machines: Industry
More informationFor securing wire terminals, cables, connectors, and other samples for pull testing [36.8] 1.0 [25.4]
For securing wire terminals, cables, connectors, and other samples for pull testing. G1001 0-0.125 [0-3.1] G1001-1 0.29 [0.13] 3.40 [86.4] 0.125 - [3.1-6.3] 1.45 [36.8] G1001-2 - 0.375 [6.3-9.5] Includes
More informationSection 5 Doors and Door Components
0 Section Whether you re looking for plain doors, locking doors, sliding doors, or large walk-through doors, you ll find what you need on the following pages. Bosch offers two basic types of doors that
More informationGauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer
More informationSHOW YOUR PROFILE WITH OCTANORM ALUMINIUM PROFILES Overview of OCTANORM's extensive collection of extrusions. Product is sorted by function and form.
SHOW YOUR PROFILE WITH OCTANORM ALUMINIUM PROFILES Overview of OCTANORM's extensive collection of extrusions. Product is sorted by function and form. exhibition systems interior design systems presentation
More informationMarine Engineering Exam Resource Review of Couplings
1. What are rigid couplings used for? Used to join drive shafts together. True alignment and rigidity are required. Example Drive shafts and production lines, bridge cranes, solid shaft that needs to be
More informationTHE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE
THE NEW JET METALFORMING LINE UP STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE SAWING NEW 14" x 60" ELECTRIC PLATE ROLLER Three-roll design
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationPipe clamps, clamp bases, connecting parts
Pipe clamps, clamp bases, pipe connecting parts 4 pipe Pipe clamps, clamp bases, connecting parts PRODUT 4 GROUP Pipe clamps, clamp bases, pipe connections ontents Page Field of application... 4.1 Product
More informationTel VIT VIT VIT VIT VIT VIT VIT VIT-300
VIT-450-1 VIT-600-1 2 PCS HIRTH Coupling VIT-450-5 VIT-600-5 VIT-800-5 VIT-1000-5 VIT-1200-5 300x300 450x450 600x600 700x700 800x800 1000x1000 1200x1200 140 170 200 220 280 300 340 - ø30 ø40 ø40 ø60 ø60
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More information