Modular clamping equipment MC range and accessories

Transcription

1 odular clamping equipment range and accessories pag. 90 -X pag. 91 S- pag. 92 Touchdex pag xtension element pag. 96 ouble support with jaws pag. 96 omplete extension element pag. 96 ase with fixed support with jaws pag. 97 ase with double support with jaws pag. 97 VS- pag. 99 VS- pag. 101 VS- pag. 102 Accessories pag. 104 Spare parts pag

2 is... odular We use the true definition of the term modular; product which is composed of separate or separable elements. With these separate or separable elements we can achieve many different clamping solutions. The only different component of these clamping solutions is the base. The base length determines the clamping capacity while all other components remain the same. Fixed and movable vise jaws can be used with any base configuration, offering the most flexible workholding solutions available. This modular system allows the user to realize the maximum number of workholding combinations with the minimum investment in equipment. urability All components are constructed from oversize steel profiles ensuring the equipment is exceptionally sturdy and can provide the user with optimal performance. Wear parts are special treated to achieve a surface hardness of 50/60 HR. All non-ground surfaces are burnished to protect against corrosion. Quick-change A patented system allows quick repositioning of the clamping jaws. The clamping jaw is lifted slightly from the base and shuttled to the next clamping position then lowered into place. Part changeovers and size changes can be made quickly and easely. Versatility The standard AK system allows the quick-change of parallels, angular parallels, soft jaws and V jaws in order to machine any workpiece. anageable The weight of 25 kg (55 lb.) for the 150. x 200. (6 x 8 ) vise and simple clamping system allow for easy movement from one machine tool to another. 88

3 The advantages of modularity + = Pag. 44 Pag = Pag. 44 Pag = 3 Pag. 47 Pag = Pag. 44 Pag = Pag. 44 Pag = pag = Pag. 44 Pag. 96 Start + Add ombine Remove = Result 89

4 clamping equipment lamping equipment complete with wrench, work stop, rigid and floating slide ways, pair of AK parallels, cover for protection of the screw wooden packing case. A S ø H F I 90 od. type A F G H I S Weight kg x , , x , , x , , x ,

5 clamping equipment -X 3 lamping equipment -X complete with wrench, work stop, rigid slide-way, (floating slide-way at request for raw workpiece), pair of positioning keys, pair of AK parallels, cover for protection of the screw, cardboard box. A S F I F ø H od. A F G H I S Weight kg x , x , = 91

6 S- double clamping equipment ouble clamping equipment S- complete with: 1 wrench, 2 work stops, 2 rigid slide-ways, (floating slide-way at request for raw workpiece), 1 pair of positioning keys, 2 pair of AK parallels, 2 covers for protection of the screw, cardboard box. A T A S F I F ø H od. A x , x , F G H I S T Weight kg The modularity of the system combined some other component offers many additional clamping solutions. + = 92

7 UTI-GRIP Vise ombidex complete with: N. 1 Indexing table F 300 (5 /45 ); N. 1 Subplate; N. 1 Plate; N. 2 Vises 150 x 200; N. 1 nd support. od xamples With S square chuck With clamping system With clamping devices 93

8 Operating instruction lamping the workpiece For controlled clamping and the best repetibility use of a torque wrench is recoended: 1 clamp the workpiece with the torque wrench at the necessary clamping force in accordance with the following diagram 2 Zero set on the workpiece 3 achine the first workpiece 4 lamp the other workpieces at the same clamping force F (da N) aw alignement When it is necessary to replace the jaws in order to ensure the best part pull-down, we recoended the following steps: (Nm) ) make sure the jaws are properly secured to the support ) loosen the adjustment screws until the jaws are backed off about 0.2. (0.008 ) tighten the lock nuts located on the back side of the support in the opposite direction of the adjustment screws 94

9 manufacturing tolerances How to clamp the vises at the table of the machine tool. In order to obtain a perfect clamping of the workpiece and in order to obtain the tolerances of which point " " is necessary to clamp the vise on the table of the machine tool by means of the ORIGINA O'S APS ( x cod see drawing n. 1 ). Or by means of the T-nuts ( see drawing n. 2) draw. N. 1 draw. N. 2 3 A S + 0,01 P + 0, /100 α α < 90 F 0.02/100 AX 0.02/100 95

10 clamping moduls extension element with pair of positioning keys S ø H od. G x , x , H S Weight kg double fixed support with jaw T od. G x x T Weight kg complete extension element with pair of positioning keys A S ø H I 96 od. A G , , , ,5 H I S Weight kg

11 clamping moduls base with fixed support with jaw complete with pair of positioning keys A S ø H od. type A G H S Weight kg , , , base with double fixed support with jaw complete with pair of positioning keys T S ø H od. type , , G H S T Weight kg Working examples see pag

12 clamping moduls Working examples xamples: Number of pieces ode number

13 odular Vertical lamping System VS- Vertical clamping system complete with: 4 clamping equipment 1 column 1 base for vertical system 4 pair of AK parallels 4 covers for protection for the screws 4 rigid slide-ways (floating slide-ways on request for raw work pieces) 4 work stops 4 wrenches eye bolt for lifting, wooden packing case A I H 3 F od. A F H I Weight kg x x x x x x x Working examples see pag

14 VS- modular vertical clamping systems od. type F H N P Weight kg Insert for vertical use od

15 odular Vertical lamping System VS- ross Vertical clamping system complete with: 4 clamping equipment 1 cross cube 4 pair of AK parallels 4 covers for protection for the screws 4 guided slide-ways ( floating slide-ways on request for raw workpieces) 4 work stops 4 wrenches eye bolt for lifting wooden packing case A I H F 3 od. A x x x x x x x F H I Weight kg Working examples see pag

16 VS- odular Vertical double lamping Systems Vertical clamping system complete with: 4 double clamping equipment 1 cross cube X 8 pair of AK parallels 8 covers for protection for the screws 8 guided slide-ways ( floating slide-ways on request for raw workpieces) 8 work stops 8 wrenches eye bolt for lifting wooden packing case F A T A G I od. A VS x F G I T Weight kg Working examples see pag

17 Vertical lamping Systems VS- ross cube for VS- od H Weight kg 3 ross cube for VS- H H od. H Weight kg VS- 150 x

18 accessories for clamping equipment Pair of grooved jaws od x 200 x Insert for vertical use (VS, VS, VS) od Torque wrench od x x Air/oil block complete with cylinder and tang od x 200 x Air/oil foot pump with joining pipe cm. 180 (71 ) and complete block for air/oil application od x 200 x Air/oil foot pump cod x x 104

19 accessories for clamping equipment Air/oil manual pump cod x x Pressure - gauge with graduated scale in Kg od x x 3 oining pipe. 1,80 (71 ) cod x x oining pipe. 3 (118 ) od x x oining pipe. 6 (236 ) cod x x 105

20 accessories for clamping equipment Pair of clamps complete with screw and T nuts T ode for T-slots x 200 x Pair of nuts complete with screws at 45 T ode for T-slots x 200 x Pair of positioning key with special dimensions T h6 ode for T-slots x 200 x 106

21 spare parts for clamping equipment ase 02...Fixed support 03...ovable support 04...aw 05...Floating slide-way 06...Rigid slide-way 08...lamping screw 09...ronze bushing 10...ontrast pin 11...Positioning plate escription 12...lock for clamping screw 13...Positioning key 14...Key for support 19...Wrench 28...over for protection of the screw 38...Pair of AK parallels 50...Work stop 83...ardboard box 90...Rubber pad 91...Screw TI 92...Screw TI 93...Screw TPS 94...Screw TPS 95...Screw TPS 96...Screw TI 97...Screw TI 107

22 spare parts for clamping equipment Pair of smooth jaws od x 200 x Fixed support with jaw od x x ovable support with jaw od x x Floating slide-way od x x Rigid slide-way od x x 108

23 spare parts for clamping equipment Pair of keys for fixed suport od x x Wrench od x x 3 omplete clamping block od x x lock for clamping screw od x x lamping screw od x x ronze bushing od x x 109

24 spare parts for clamping equipment ontrast pin od x x Positioning plate od x x Pair of standard positioning keys T h6 od x x T h Work stop od x x over for protection of the screw od x x 110

25 spare parts for clamping equipment lock for cylinder od x x Tang for cylinder od x x 3 an of oil od x x xamples 111

26 112