SUBITO -Precision Bore Measuring Instrument

Size: px
Start display at page:

Download "SUBITO -Precision Bore Measuring Instrument"

Transcription

1 Precision Bore Measuring Instrument for measuring internal diameters, application 4,5 00 mm SU/SK/SW SERIES 1 ANDARD VERSION SERIES SU w. inspection certificate Delivery: Holder, fixed measuring pins, washers, in wooden box, w/o dial gauge. Movable contact pin as standard tungsten. Ruby Version: Measuring pins and contact pin ruby. Version centring plate coated wearresisting: standard with measuring pins tungsten. SU /SK / SW SHORT VERSION SERIES SK w. inspection certificate Delivery: as Series SU, but with a short holder. ANGLED VERSION SERIES SW Delivery: as Series SU, but holder with a fixed angle piece. SU Measuring pins steel Art.No. SU SK SW 4, with extended measuring and for spherical diameters on inquiry Measuring pins tungsten Art.No. SU SK SW Centring plate coated Art.No. SU SK SW COMBINATION OF SEVERAL COMPLETE SETS w. inspection certificate to cover large measuring s, consisting of 2 and 3 complete measuring instruments in one wooden box, w/o dial gauge. SU 1 2 steel Art.No Art.No Centr. plate coated Art.No ruby Art.No several complete sets

2 SW Holder Measuring pins ruby Art.No. SU SK SW SU Holder Art.No. SK SU 4,5 and SU 0 Segment Measuring depth extension for bore gauges, plugin extension, clamping shank Ø mm MTV SERIES 0 Suitable from diameter mm. MEAS. DEPTH EXTENSION MTV tubeø length Art.No tubeø length 0 00 special length Art.No on inquiry Measuring depth extention MTV Inspection Certificates for SCHWENK measuring instruments see p.32 7

3 Vario Precision Bore Measuring Instrument for measuring internal diameters, application 00 mm SV/SVS SERIES 24 Delivery SV: Vario SV modular system consisting of one upper part and different measuring heads in Vario design; with fixed measuring pins, washers, in wooden box, w/o dial gauge. VARIO SV Type SV Meas. heads SUBITO Vario steel Art.No Accessories for Vario SV/SVS, e.g. measuring depth extensions, angle piece on inquiry Art.No Vario SV VARIO SVS Type SVS Vario blind bores Meas. heads 140 steel Art.No Art.No Vario System SVS RABITOPrecision Bore Measuring Instrument for measuring internal diameters, application 1 mm Delivery: Holder, fixed measuring pins in steel, washers, in wooden box, w/o dial gauge. RA SERIES RABITO RA 0 1 1* * consists of 2 complete sets in wooden box Art.No Rabito 1

4 Vario Plug Gauge for measuring internal diameters, application 1 mm SCA SERIES 1 Measuring w/o tipping of the instrument, similar to Series OD due to special selfcentring and selfaligning centring plate; adaptable to changing diameters with different measuring pins. Delivery: short holder with special centring plate, fixed measuring pins and contact pin tungsten tipped, washers, in wooden box, w/o dial gauge. (Use of measuring depth extensions is not recommended). VARIO PLUG GAUGE SCA Art.No Precision bore gauge SCA Precision Bore Measuring Instrument for measuring of blind bore diameters SS/SSV SERIES Delivery: Holder, measuring slides and contact pin tungsten as standard, in wooden box, w/o dial gauge. Version with h = 1 mm: for measuring very close to the bottom of the bore. SS front distance h 1,5 1,5 1,5 1,5 2,0 2,0 2,0 meas. slides Art.No meas. slides ruby Art.No holder SS Art.No SS for blind bores s: travel D: diameter to be measured h: front distance Delivery: 1 short upper part, 2 blind bores measuring heads, measuring slides, in wooden box, w/o dial gauge. BLIND BORES VARIO SSV S ØD front distance h for SS h front distance h 1,5 meas. slides Art.Nr meas. slides ruby Art.Nr Inspection Certificates for SCHWENK measuring instruments see p.32 9

5 Precision Bore Measuring Instrument for measuring internal diameters in large depth SMT SERIES 2244 Delivery: as Series SU, but holder in special length; fixed measuring pins and movable contact pin tungsten tipped as standard, coated centering plate, in wooden box or transportation box, w/o dial gauge. Larger and intermediate depth on inquiry. SMT 4, Art.No Measuring depth 0 7 Art.No Art.No Art.No in: Special measuring depth SMT 0 mm Standard meas. depth SU short version SK Art.No Meas.depth 00 Art.No. Art.No Art.No Art.No Precision Bore Measuring Instruments SE for measuring deep bores SERIES 1133 For the use with an electronic length measuring probe and indicating unit; measuring depths up to m are possible. A complete instrument consists of: meas. head, connecting tube (0 mm) w. cardan joint, length measuring probe, extensions if necessary. Delivery in transportation box, w/o length measuring probe, w/o indicating unit. SE Art.No * > 0 on request * meas. extension up to Ø 0 mm/ mm on request SE for deep bores up to m depth

6 Precision Bore Gauge for measuring reference diameters of internal gears SERIES 14 Delivery: Holder with contact pin and exchangeable measuring inserts; contact pin and measuring inserts with inside thread to screw in ball inserts; in wooden box, ball inserts to be ordered separately. Measuring instruments for internal gears from diameter mm based on OSIMESS on inquiry. M Art.No with measuring inserts and ball inserts ACCESSORIES M 22 2 and 5 M choice*; ball Ø d over 0, mm up to 2 mm (1 x meas. pin, 1 x ball insert) choice*; ball Ø d over 0, mm up to 4 mm choice*; up to ball Ø d 7 mm choice*; ball Ø d over 7 mm up to mm Reducing socket for the use of ball inserts 22 in choice*; up to ball Ø d 7 mm choice*; ball Ø d over 7 mm up to mm Reducing socket for the use of ball inserts Thread M 1, M 1, M 2,5 M1,/M2,5 in 2/5 * Ball inserts with standard ball diameter < mm according to our tungsten ball list on page. Deviating intermediate dimensions + 25% extra charge. Ball inserts with tungsten ballø 0, mm and mm on inquiry. M 4 M4/M 2,5 Art.No Ø d k M even no. of teeth add no. of teeth M E dk dk Precision Bore Gauge for measuring planeparallel distances SERIES SP dimensions Delivery: Holder with special centring plate, fixed measuring pins, washers, in wooden box, w/o dial gauge. Movable contact pin tungsten tipped as standard. SP 0 steel Art.No Art.No Centring plate only Art.No SP for planeparallel distances (right) Inspection Certificates for SCHWENK measuring instruments see p.32 11

7 Precision Bore Gauge SN for measuring grooves and recesses SERIES 1517 Holder with retraction for measuring recesses with groove width from 3 mm; in wooden box, w/o dial gauge. Delivery with one measuring pin for the required diameter within the application. SN Retraction,5 23 Art.No SN for grooves and recesses with 0 rotable fixed measuring pin; in wooden box, w/o dial gauge. Precision Bore Gauge for measuring pillow block housings, internal grooves and recesses SERIES Standard Meas. depth Meas. depth 0 mm Meas. depth 400 mm Meas. depth 7 mm with fixed measuring pin turned in Precision Bore Gauge ON/ONM for measuring grooves and recesses SERIES 190 Complete set: basic unit and expanding probe ON, ONM (additionally with meas. slides); Retraction travel up to mm (standard); up to mm from Ø 40 mm possible; Delivery in wooden box, w/o dial gauge. Expanding probe ON: Probe with determined of application. Expanding probe ONM: Probe with flexible of application through movable slides, which have to be ordered separately. BASIC UNIT ON/ONM Art.No. Holder for expand. probe ON and ONM mm travel or mm travel Basic unit ON / ONM with expanding probe ON, ONM and meas. slides

8 Precision Bore Gauge for measuring grooves and recesses ON/ONM SERIES 190 EXPANDING PROBE ON special s Art.No EXPANDING PROBE ONM Travel Art.No MEASURING SLIDES FOR ONM MM TRAVEL for ONM Art.No for ONM Special s Art.No Accessories measuring depth extension, depth stop for ONM Art.No for ONM Art.No > up to maximum 0 mm in 5 mm steps Special s from 40 to mm Special s from to 0 mm Blind bore design on inquiry B insertion E ACCESSORIES / OPTIONS Measuring depth extension mm from Ø Measuring depth extension 2 mm from Ø Depth stop Expanding probe hard chrome plated Measuring slide hard chrome plated Adapting expanding probes / measuring slides to reduced groove width B Art.No B E measurement Inspection Certificates for SCHWENK measuring instruments see p

9 Delivery: frame with setting jaws holder, pair of setting jaws, tungsten measuring anvils in gauge block quality, clamping unit, stand, in wooden box; w/o gauge blocks FOR SU/ SK/ SW/ SMT/ SP/SV Setting Master for setting twopoint comparator measuring instruments with the help of gauge blocks ESU SERIES 5 Setting Art.No. 4,5 4,5 4, greater lengths / models for bore gauges of other brands on inquiry Setting master ESU with vertical measuring axis for Series SS SS ODK/ODKK ODK/ODKK Setting Art.No SPARE PARTS Setting Setting jaws holder with straddling lever (suitable for all setting jaws pairs, except for SP) Art.No Setting master ESU with horizontal measuring axis Pair of setting jaws with stay bolt and nut 4,5 for SS 2 for w. setting jaws holder for SP Prism pair for OD cross sleeves / cross sleeves with runners Pair of tung. meas. anvils for ESU 4,5 Pair of tung. meas. anvils for ESU 5 Frame with clamping unit for setting up to mm for setting up to mm for setting up to 00 mm for setting up to 00 mm Special lengths on inquiry Stand for setting up to mm Wooden box 4,5 4, on inquiry Accessories setting jaws / measuring anvils 14 Setting master for OD cross sleeves / cross sleeves with runners

10 Distance measuring instruments for measuring bore depths, shoulders, widths / distances of grooves and recesses OT SERIES SERIES OT OT Standard with mm ball insert M 2,5 and meas. bridge 0 mm, in wooden box OT 4 complete set with handle, meas. sleeve and probe finger, in wooden box Meas.depth 175 / / Art.No / / ACCESSORIES/SPARE PARTS Measuring bridge Measuring bridge Measuring depth extension Rotable probe finger Probe finger Measuring sleeve Measuring stop dimens Art.No Depth meas. instruments OT Standard (bottom) and OT 4 (top) Principle OT Measuring stop Measuring sleeve Rotable probe finger Probe finger Precision Bore Gauge for measuring bores w. boring bar left in the workpiece SERIES 1154 SL Selfcentring bore gauge for determining bore diameters, for instance with boring bar left in the workpiece. Design: meas. instrument w. column (mmor inchgraduation) for presetting of the diameter, in wooden box, w/o dial gauge. SL max. Ø of boring bar Meas. depth [inch] [inch] [inch] , Art.No SL Inspection Certificates for SCHWENK measuring instruments see p.32 15

SUBITO Precision Bore Gauge

SUBITO Precision Bore Gauge FOR MEASURING INTERNAL DIAMETERS, APPLICATION RANGE 4,5 800 MM SU/SK/SW SERIES 100118 STANDARD VERSION SERIES SU with manufacturer certificate Delivery SU: holder, fixed pins, washers, in wooden box, without

More information

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65

More information

LIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES

LIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW

More information

Gauge Blocks - Reference for Precision

Gauge Blocks - Reference for Precision ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance

More information

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281

More information

Accessories, spare parts and measuring equipment

Accessories, spare parts and measuring equipment Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare

More information

Multimar. Universal Gage 844 T for external and internal dimensions

Multimar. Universal Gage 844 T for external and internal dimensions - 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.

More information

台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY

台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY C1 C2 C3 Dial Gages (Small Bezel Dia) DG-9003S DG-9004S DG-9005S DG-9003S DG-9004S 0-3mm 0-4mm ψ40mm Aluminum Body ψ36mm Aluminum Body DG-9005S 0-5mm ψ40mm Aluminum Body Dial Gages (Normal) DG-9010A DG-9010R

More information

MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments

MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments + MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments Indicator Stands MarStand 815 GN With Cast Iron Base MarStand 815 MA / 815 MB / 815MG / 815 P With Magnetic Base 8-2 8-3 Post

More information

TESATAST Standard Models

TESATAST Standard Models TESATAST Standard Models 0110005 0,01 0, 2 0 0,4 0 12,53 0110006 0,01 0, 3 0 0,4 0 12,53 0110007 0,01 0,5 2 0 0,25 0 36,53 011000 0,01 0,5 3 0 0,25 0 36,53 0110009 0,002 0,2 2 0 100 0 12,53 0110010 0,002

More information

0268 Gear tooth calipers

0268 Gear tooth calipers 0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26

More information

0280 / 0281 Vernier depth gauges

0280 / 0281 Vernier depth gauges 0280 / 0281 Vernier depth gauges Reading parts have a satin chrome finish 862 Low-set master scale Measuring rod with interchangeable pin High-precision laser graduation on the vernier and scale Cardboard

More information

COMPAC Dial Test Indicators

COMPAC Dial Test Indicators DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface

More information

RZP. 3-jaw centric gripper

RZP. 3-jaw centric gripper RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide

More information

Technical Information

Technical Information Technical Information TI No. WL 80-48 E April 1999 Rolling Bearings FAG Mechanical Extractors Small rolling bearings with bore diameters of up to about 100 mm which have an interference fit on the shaft

More information

Measuring. Affordable. Effective. Instruments

Measuring. Affordable. Effective. Instruments Measuring Effective Affordable Instruments 2 Electronic Calipers 00534002 00534003 00534020 n Stainless steel frame n Thumb wheel for rapid setting n Direct Metric/Inch conversion n Accuracy to 0,02 mm

More information

ПОСТАВЩИК: Компания ООО"ИНТЕХСЕРВИС" ,г.Москва,ул.Гурьянова,д.2,корп.2 тел./факс: 8(499) E mail:

ПОСТАВЩИК: Компания ОООИНТЕХСЕРВИС ,г.Москва,ул.Гурьянова,д.2,корп.2 тел./факс: 8(499) E mail: Calipers B-1 E LECTRONIC C ALIPERS DIN 862 (Style 1A-ZS) 0,01 0.0005 in LCD, 7 Floating zero TESA CAL IP67 magna µ system Patented measuring system TESA magna µ system New electronic caliper The highest

More information

TESA IMICRO capa µ system with Digital Display

TESA IMICRO capa µ system with Digital Display DIN 86 T4 (Style C1) 0,001 0.0005 in TESA IMICRO capa µ system with Digital Display A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. Metric/inch Conversion

More information

Internal Measurement. Internal Measurement C-1

Internal Measurement. Internal Measurement C-1 Internal Measurement Internal Measurement C-1 Internal Measurement Internal Measuring and Requirements Internal measuring of bores is more demanding than external measurement of workpieces. Not only the

More information

Measurement & Calibration

Measurement & Calibration Measurement & Calibration MIC TRAC 4000 In-House Precision Gage Calibration System Inspect Parts, Calibrate, and Track Gages Step 1: Find what type of gages you have. Gages & Indicators for Calibration

More information

200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until

200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until 3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier

More information

testing and measuring instruments for vehicle wheels

testing and measuring instruments for vehicle wheels testing and measuring instruments for vehicle wheels en testing and measuring instruments for vehicle wheels For more than 20 years MAKRA has been manufacturing measuring and testing equipment for the

More information

ABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements.

ABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements. + Millimess. Digital Comparators 6- Inductive Digital Comparator µmaxµm ABS System 0 TOL RS232C Digimatic The most valueable electronic indicator for high production measurements. Inch/Metric operator

More information

Height Master Page 345. Check Master Page 349. Calibration Tools Page 354

Height Master Page 345. Check Master Page 349. Calibration Tools Page 354 Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm

More information

Rev /07/2015 CATALOGUE - CALIBRATION SERVICES 1

Rev /07/2015 CATALOGUE - CALIBRATION SERVICES 1 Rev. 02 07/07/2015 CATALOGUE - CALIBRATION SERVICES 1 OVER 100 ITEMS We are proud to present to you our new catalogue for 2015. In the following pages we present more than 100 instrument types, which we

More information

> piston force up to 20,1 kn. > operating pressure 250/350 bar. > chemically nitrided body. > piston force up to 44,0 kn. > operating pressure 350 bar

> piston force up to 20,1 kn. > operating pressure 250/350 bar. > chemically nitrided body. > piston force up to 44,0 kn. > operating pressure 350 bar Vertical and link CLAMPS for DEMANDING TASKS vertical CLAMP > piston force up to 20,1 kn > operating pressure 250/350 bar > chemically nitrided body link CLAMP > piston force up to 44,0 kn > operating

More information

STANDARD RETOOLABLE GAUGES. Countersink Depth. ID Measuring. Measuring. Wired with integral cycle button. Wireless

STANDARD RETOOLABLE GAUGES. Countersink Depth. ID Measuring. Measuring. Wired with integral cycle button. Wireless STANDARD RETOOLABLE GAUGES ID Measuring Countersink Depth Measuring Wireless Wired with integral cycle button ID Measuring All retoolable by replacing the nosepiece All retoolable by replacing the either

More information

Glass & Wooden Door Fittings

Glass & Wooden Door Fittings Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems

More information

THE PRODUCTION COMPARATOR STAND

THE PRODUCTION COMPARATOR STAND 845-454-3111 800-549-4243 THE PRODUCTION COMPARATOR STAND The Dorsey E1 comparator stand is specially designed for use in production and shop areas. The comparator stand has a large base and 3" throat

More information

MC range and accessories

MC range and accessories odular clamping equipment pag. range and accessories 3.1. 3 -X pag. 3.1. 4 S- pag. 3.1. 5 xtension element ouble support with jaws pag..1. 6 pag. omplete extension element pag. 3.1. 6 ase with fixed support

More information

Dial and Electronic. Indicators Gauges

Dial and Electronic. Indicators Gauges Dial and Electronic Indicators Gauges 37 AGD Group 2 2900 Electronic Indicators Innovative, Full Featured & Tough 2900 Electronic Indicators are available in a choice of configurations to meet a range

More information

Dynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements

Dynamic Elements Linear Slides Mechanical Drive Elements Accessories for Mechanical Drive Elements 8 Dynamic Elements Mechanical Drive Elements Accessories for Mechanical Drive Elements The Dynamic Elements product group of the MB Building Kit System contains components which enable precise linear movement.

More information

t in Promotion Brochure Spring 2017 Partner for specialist retailers In Germany at home in demand worldwide valid until

t in Promotion Brochure Spring 2017 Partner for specialist retailers In Germany at home in demand worldwide valid until ts n e l i-ta t l u M ion t c A in + al rigin Swiss tknif e o c ke artner for specialist retailers romotion Brochure Spring 17 In Germany at home in demand worldwide valid until 30.0.17 1 MUL T I -TA L

More information

Exploded view 3 piece ball valves Series R

Exploded view 3 piece ball valves Series R Exploded view 3 piece ball valves Series R Ball valve of series R with reduced bore (standard version) DN10 to DN65 Example shown: Series R DN65 Please follow assembly and maintenance instructions carefully.

More information

Dial Test Indicators SERIES 513

Dial Test Indicators SERIES 513 Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow

More information

Q-Tech Engineering Services, S-134, C/o, Precision Engineering Works, MIDC, Bhosari, Pune, Maharashtra

Q-Tech Engineering Services, S-134, C/o, Precision Engineering Works, MIDC, Bhosari, Pune, Maharashtra Last Amended on 24.05.2015 Page 1 of 5 I. DIMENSION 1. EXTERNAL MICROMETER $ L.C. 1 µm Φ >100 mm to 300 mm 1.4 µm 3.0 µm Using Slip Gauge Blocks Gr '0' / Long Slip Gauges, by Comparison 2. DEPTH MICROMETER

More information

DIAL SNAP GAUGE. dial indicator is not included W. optional indicators

DIAL SNAP GAUGE. dial indicator is not included W. optional indicators DIAL SNAP GAUGE dial indicator is not included 36 A 2 215-25W anvil Ø15 B 11 anvil 14 For quick Go/No-Go judgment of diameter of cylinders and shafts Anvil retracting stroke: 3mm Measuring force: 6-9N

More information

E905-WFMW + RP991BLMW E901-WFMW + RP995BLMW E905-WFMW + RP999MW

E905-WFMW + RP991BLMW E901-WFMW + RP995BLMW E905-WFMW + RP999MW Magnetic Bases and Fitments Magnetic Bases All units are suitable for use with dial indicators and test dial indicators 900 and 901 versions both have push button ON/OFF control 905 model has a toggle

More information

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at

More information

Measuring and testing equipment. Run-out testers Comparator stands Small measuring instruments

Measuring and testing equipment. Run-out testers Comparator stands Small measuring instruments Run-out testers Comparator stands Small measuring instruments Benennung Artikel-Nr. Run-out testers Height of centres 50 mm height of centres 75 mm Benzing run-out testers consist of a base plate, a pair

More information

CONVENTIONAL WORKHOLDING

CONVENTIONAL WORKHOLDING simple. gripping. future. CONVENTIONAL WORKHOLDING 1 Avanti Quick Jaw Exchange System 14 Avanti 46 16 Avanti 18 Avanti 11 Profilo Contour Jaw System 112 Profilo 113 Profilo 114 Profilo Dual clamping vice

More information

ASP Series Steel Body NFPA Cylinder Line

ASP Series Steel Body NFPA Cylinder Line Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8

More information

Gripping rotary modules.

Gripping rotary modules. Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC

More information

NCN 9.2. Clamping vise with mechanical/mechanical clamping force multiplier NCN MVS-NCN CLAK NCN. Accessories NCN. Spare parts NCN.

NCN 9.2. Clamping vise with mechanical/mechanical clamping force multiplier NCN MVS-NCN CLAK NCN. Accessories NCN. Spare parts NCN. lamping vise with mechanical/mechanical clamping force multiplier pag. 9.2. 2 lamping vise V- pag. 9.2. 8 odular vertical system K pag. 9.2. 14 odular parallels/quick change ccessories pag. 9.2. 15 pare

More information

Performance requires quality.

Performance requires quality. 131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21

More information

1360 DIGI-MET Depth gauges

1360 DIGI-MET Depth gauges 360 DIGI-MET Depth gauges 862 Protection class IP67 862 Straight measuring rod RS 232 + Digimatic + USB mm inch mm inch mm inch 50 6 00 4 0.0.005 360 76 304.00 200 8 00 4 0.0.0005 360 78 345.00 300 2 50

More information

Runner block FNS R Flanged, normal, standard height

Runner block FNS R Flanged, normal, standard height 38 Bosch Rexroth Corporation Roller Rail Systems R310A 30 (007.06) Standard Runner Blocks, Steel version Runner block FS R1851... 10 Flanged, normal, standard height Further runner block versions with

More information

GTO Precise, universal stationary chuck for collets

GTO Precise, universal stationary chuck for collets Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest

More information

Over 2 mm and. less than 10mm. 1/10 revolution /2 revolution ±9 ±5 ±6 ±3 ±5 ±6. One revolutions ±10 ±6 ±7 ±4 ±6 ±7

Over 2 mm and. less than 10mm. 1/10 revolution /2 revolution ±9 ±5 ±6 ±3 ±5 ±6. One revolutions ±10 ±6 ±7 ±4 ±6 ±7 G1 Scale interval 0.01mm 0.002mm 0.001mm Measuring range 10mm max. 2mm max. Over 2 mm and less than 10mm 1mm max Over 1 mm and less than 2mm Over 2 mm and less than 5mm Retrace error 5 3 4 3 3 4 Repeatability

More information

Toolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available

Toolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine

More information

tough. Live Centers Face Drivers 2013/2014

tough. Live Centers Face Drivers 2013/2014 tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers

More information

Glass & Wooden Door Fittings

Glass & Wooden Door Fittings Glass & Wooden Door Fittings Product range: Door Sliders Door Track Plastic Glass Clamps Glass Door Channel Aluminium Glass Door Channel Plastic Glass Door Hinges Glass Door Locks Glass Sliding Door Systems

More information

Accurate Precision Machining R12/16/20 CNC VERTICAL LATHE ISO 9001

Accurate Precision Machining R12/16/20 CNC VERTICAL LATHE ISO 9001 Accurate Precision Machining R12/16/20 CNC VERTICA ATHE ISO 9001 ABOUT RADAR Radar Industrial Co., td., established in 2007, has more than 50 years of experience in manufacturing professional machine tools

More information

TESA Clearance Sale TESA CAL IP67 DIGITAL CALIPERS (METRIC ONLY) DIGITAL LIGHT CALIPERS DIGITAL DEPTH LIGHT CALIPERS ETALON DIAL CALIPERS

TESA Clearance Sale TESA CAL IP67 DIGITAL CALIPERS (METRIC ONLY) DIGITAL LIGHT CALIPERS DIGITAL DEPTH LIGHT CALIPERS ETALON DIAL CALIPERS CLEARANCE SALE TESA Sale Validité: 31.10.2016 ou épuisement des stocks Gültig bis 31.10.2016 oder solange der Vorrat reicht Validity: 31.10.2016 or while stock lasts TESA CAL IP67 DIGITAL CALIPERS (METRIC

More information

Climax Valve Repair Machines

Climax Valve Repair Machines VM7000 VM6000 VM8000 Climax Valve Repair Machines descriptions specifications operational dimensions components CLIMAX Portable Machine Tools, Inc. 6/00 1 Model VM7000 Valve Boring Machine Now you can

More information

Internal Measurement. D-1

Internal Measurement.  D-1 www.tesatechnology.com D-1 THE CHALLENGES OF INTERNAL MEASUREMENT Bore measurement is more difficult than external measurement of components. Apart from the very tight tolerances specificied, all measuring

More information

DUMPER. Data Book 50 Hz

DUMPER. Data Book 50 Hz Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 CURVE SPECIFICATIONS 203 1X 51-S 204 1X 51.5-S 205 2X 51.5-S 206 2X 52.2-S 207 2X 53-S 208 3X

More information

DUMPER. Data Book 50 Hz

DUMPER. Data Book 50 Hz Data Book 50 Hz CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 202 GAMMA 203 CURVE SPECIFICATIONS 204 1X 51-S 205 1X 51.5-S 206 2X 51.5-S 207 2X 52.2-S 208 2X 53-S 209 3X 53.7-S 210 3X

More information

Modules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6

Modules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6 NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules

More information

TRI TOOL INC. TECHNICAL SPECIFICATION MODEL 206B BEVELMASTER SYSTEM JANUARY, 2001

TRI TOOL INC. TECHNICAL SPECIFICATION MODEL 206B BEVELMASTER SYSTEM JANUARY, 2001 TRI TOOL INC. TECHNICAL SPECIFICATION MODEL 206B BEVELMASTER SYSTEM JANUARY, 2001 MODEL 206B BEVELMASTER PORTABLE LATHE SYSTEM The Model 206B BEVELMASTER is a portable I.D. mount machine tool for beveling,

More information

Technical Data, Dimensioning, Mounting

Technical Data, Dimensioning, Mounting 6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load

More information

Check Points. for Measuring Instruments

Check Points. for Measuring Instruments Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement, there are many kinds of measuring instruments and their corresponding measuring

More information

- Pullers - Puller Units - Hydraulic Puller Sets - Track Alignment Gauges - Towing Rods

- Pullers - Puller Units - Hydraulic Puller Sets - Track Alignment Gauges - Towing Rods - Pullers - Puller Units - Hydraulic Puller Sets - Track Alignment Gauges - Towing Rods Use Areas: Automotive Maintenance Electrical Industries Mecanical Engineering Industry Motorbike Garage Automobile

More information

Dial Gauges. Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability.

Dial Gauges. Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability. Features Dial Gauges Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability. Standard steel test tip Ø 3.175mm, hardened stainless

More information

Inspection boxes and accessories

Inspection boxes and accessories 06 Inspection boxes and accessories 06 Metal inspection boxes 159 TUTTO plastic inspection boxes 163 page METAL INSPECTION BOXES 16 Sheet steel boxes and compatible manifolds In order to make box selection

More information

Electronic Length Measuring Equipment

Electronic Length Measuring Equipment Electronic Length Measuring Equipment N-1 TESA LENGTH MEASURING EQUIPMENT WITH INDUCTIVE PROBES TESA offers a complete family of value sensors (electronic probes) as well as dedicated measuring instruments

More information

PS Powder Sieve Machine

PS Powder Sieve Machine Spare Parts List Issued 07/95 PS Powder Sieve An ITW Company 7 Spare Parts List 7.1 Ordering Spare Parts When ordering spare parts for powder coating equipment, please indicate the following specifications

More information

BEST OF 2015 January December

BEST OF 2015 January December BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January

More information

Available in Carbon Fiber

Available in Carbon Fiber 845-454-3111 800-549-4243 DORSEY LARGE DIAMETER GAGES LDF Series LDVA Series LDA Series LDD Series Ultra Large diameter gage. Measurement range 120" - 132" Weight 10.5lbs/4.76kg Carbon fiber diameter gages

More information

8000 AE 0 - AE 4 CIRCLIP PLIERS FOR EXTERNAL RETAINING RINGS

8000 AE 0 - AE 4 CIRCLIP PLIERS FOR EXTERNAL RETAINING RINGS PLIRS RG Circlip pliers for external retaining rings (shafts) 8000 Flattened tip mounting makes it easier to get at the safety ring eyelets Precision, screwed joint. The screw ensures ease in re-adjusting

More information

Guide units. For toolmaking, fixture manufacturing and machine engineering

Guide units. For toolmaking, fixture manufacturing and machine engineering Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar

More information

Test Indicators. Dial Test Indicators MEASURING TOOLS & INSPECTION INSTRUMENTS. Dial Test Indicators. Long Range Dial Test Indicators. Inch.

Test Indicators. Dial Test Indicators MEASURING TOOLS & INSPECTION INSTRUMENTS. Dial Test Indicators. Long Range Dial Test Indicators. Inch. Meets DIN2270 or BS2795 standard Satin chrome finish, brass body, anti-magnetic Jeweled bearing, shock-proof Interchangeable carbide contact point, 0.0787 /2mm diameter ball, supplied with wrench Probe

More information

SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS

SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN

More information

- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403

- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE

More information

SPARE PARTS LIST WALL SAW WSE1621

SPARE PARTS LIST WALL SAW WSE1621 SPARE PARTS LIST WALL SAW Index 000 EN Spare Parts List 10999154 de / 01.11.2018 How to use the spare parts list The spare parts list is not intended as instructions for assembly or dismantling work. It

More information

PWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16.

PWG. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 6.44 Nm Nm. Weight 0.33 kg 16. PWG Sizes 65 230 Weight 0.33 kg 16.3 kg Gripping moment 6.44 Nm 934.2 Nm Angle per jaw 20 Workpiece weight 0.8 kg 35.8 kg Application example Rotary feed unit for shafts 2-Finger Angular Gripper PWG Rotary

More information

Precision Measuring Tools and Test Instruments EDITION

Precision Measuring Tools and Test Instruments EDITION Precision Measuring Tools and Test Instruments EDITIO 2015/2016 info@vogel-germany.de - ww.vogel-germany.de Explanations 1 2 3 4 5 6 8 9 10 11 In our catalogue you will find several pictograms beside the

More information

Pneumatic Axial Die Grinder also for Underwater Use Type , 0050

Pneumatic Axial Die Grinder also for Underwater Use Type , 0050 M a s c h i n e n f a b r i k G m b H Pneumatic Axial Die Grinder also for Underwater Use Type 1 5077 0010 0020, 0050 Illustration can differ from the original Repair Manual and Compiled: 18.07.11 150770010_0020_0050_Inst_en_Version_00

More information

BC Spare parts list. Bucket crusher. BC 2500 s/n DEQ Construction Tools GmbH No

BC Spare parts list. Bucket crusher. BC 2500 s/n DEQ Construction Tools GmbH No BC 2500 Spare parts list Bucket crusher BC 2500 s/n DEQ159235 2018 Construction Tools GmbH No. 3390786201 2018-01-01 General information This spare parts list applies to the following: Part number Description

More information

P: E: W: 1 of 20 MEG DS 034 A

P: E: W:  1 of 20 MEG DS 034 A McMillan Engineering Group designs and manufactures a complete range of standard and custom IHS Jacking Equipment to suit all of your construction needs. 1 of 20 MEG DS 034 A Index IHS Double Acting Cylinders...

More information

CLIMAX OD MOUNT FLANGE FACERS

CLIMAX OD MOUNT FLANGE FACERS CLIMAX OD MOUNT FLANGE FACERS 06 2018 FF122436 VERSATILITY. DURABILITY. SAFETY. The latest innovation in Climax's line of flange facers, this series of OD Mount Flange Facers set a new standard in safety,

More information

NTN-SNR HYDRAULIC NUT HMV..EBF OPERATING INSTRUCTIONS

NTN-SNR HYDRAULIC NUT HMV..EBF OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Copyright NTN-SNR HMV_TS 1964gb1.04 TABLE OF CONTENTS 1. Safety Instructions... 2 2. Product Description... 3 2.1. Structure and equipment... 3 2.2. Connections / Bores... 4 2.3.

More information

E3000 SERIES CONTROL UNIT

E3000 SERIES CONTROL UNIT ispeed E E BRUSHLESS MOTOR & SPINDLE SERIES Modular Type (ø mm),~, min- (rpm) Maximum Output W Motor speed is displayed accurately on the front panel. Auto or Manual Control Modes. Can be installed on

More information

CIVI Multiple clamping system. CIVI 2000 base set pag. 72. CIVI 2000 movable jaw set pag Movable jaw set with aluminium jaws pag.

CIVI Multiple clamping system. CIVI 2000 base set pag. 72. CIVI 2000 movable jaw set pag Movable jaw set with aluminium jaws pag. ultiple clamping system IVI 2000 IVI 2000 base set pag. 72 IVI 2000 movable jaw set pag. 73 2 ovable jaw set with aluminium jaws pag. 74 IVI 2000 accessories pag. 76 V IVI 2000 pag. 78 olumn IVI 2000/Touchdex

More information

BEST OF A selection of our most popular products. To view the complete range visit

BEST OF A selection of our most popular products. To view the complete range visit BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it

More information

Hydraulic Angle Grinder for Underwater Use Type

Hydraulic Angle Grinder for Underwater Use Type M a s c h i n e n f a b r i k G m b H Hydraulic Angle Grinder for Underwater Use Type 1 1585 0010 Illustration can differ from the original Repair Manual and Spare Parts List Compiled: 18.01.13 115850010_Inst_en_Version_03

More information

Gear Measurement. Lecture (7) Mechanical Measurements

Gear Measurement. Lecture (7) Mechanical Measurements 18 3. Gear profile checking 2. Involute measuring machine In this method the gear is held on a mandrel and circular disc of same diameter as the base circle of gear for the measurement is fixed on the

More information

KFD-HE. Power chucks with through-hole

KFD-HE. Power chucks with through-hole K-HE Power chucks with through-hole APPLICATION Standard power chuck with through-hole for bar and tube machining, as well as for flange-type workpieces. TYPE Standard version with cylindrical center mount.

More information

Modular clamping equipment MC range and accessories

Modular clamping equipment MC range and accessories odular clamping equipment range and accessories pag. 90 -X pag. 91 S- pag. 92 Touchdex pag. 93 3 xtension element pag. 96 ouble support with jaws pag. 96 omplete extension element pag. 96 ase with fixed

More information

Through Hole Parallel Gripper PPC Series

Through Hole Parallel Gripper PPC Series ourtesy of MA/Flodyne/Hydradyne Motion ontrol Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 8 hrough Hole Parallel Gripper PP Series hrough Hole Gripper: Designed for unique applications

More information

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service

More information

Turning tools GENERAL TURNING PARTING AND GROOVING THREAD TURNING MULTIFUNCTIONAL TOOLS TOOL HOLDING TURNING TOOL ADAPTORS

Turning tools GENERAL TURNING PARTING AND GROOVING THREAD TURNING MULTIFUNCTIONAL TOOLS TOOL HOLDING TURNING TOOL ADAPTORS UTTN TOOLS ROM SANVK OROMANT Turning tools NRAL TURNN PARTN AN ROOVN TRA TURNN MULTUNTONAL TOOLS TOOL OLN TURNN TOOL AAPTORS 2015 ylindrical sleeve with asy-ix positioning SO 9766 Metallic sealed for high

More information

Product Information. Rotary gripping module with angular gripper RW

Product Information. Rotary gripping module with angular gripper RW Product Information RW RW Flexible. Modular. Compact. Gripper Swivel Module RW Rotary gripper combination, consisting of a rotary module and a 2-finger angular gripper Field of application Gripping and

More information

Live and Dead Centres

Live and Dead Centres s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for

More information

ay Manifold Mounted KHP3K

ay Manifold Mounted KHP3K 3-Way ay Manifold Mounted Ball Valves KHP3K up to 500 bar up to DN 32 1. DESCRIPTION 1.1. GENERAL According to DIN 2429, FLUTEC 3/2-way manifold mounted ball valves are units for shutting off and diverting

More information

Technical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points

Technical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 134 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 134

More information

Laura Espresso Coffee Machine

Laura Espresso Coffee Machine 1 2 4 10 11 2 1 14 12 12 15 1 22 10 8 21 7 9 17 5 20 18 19 Pos Code Description 1 C9900809 Plastic grid 2 C01990299 2 groups cups tray 2 C0199000 groups cups tray C5770011 Pin 4 D0001005 Right side panel

More information

LB data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet

LB data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet data sheet parts list exploded view dimensional drawing sectional drawing performance curve parts list as Excel-spreadsheet Heltorfer Str.6 40472 Düsseldorf Germany Tel.: +49-2-479373 Fax: +49-2-479429

More information

Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type

Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Versatile ID measuring gages for holes diameters, groove thickness, tube thickness, and hard-to-reach dimensions. The Digimatic Caliper

More information

- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403

- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403 CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY 204 GAMMA 205 CURVE SPECIFICATIONS 206 PERFORMANCE CURVE 1X 207 PERFORMANCE CURVE 2X 208 PERFORMANCE CURVE 3X 53.7 209 PERFORMANCE CURVE

More information