MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments
|
|
- Frederica Jenkins
- 6 years ago
- Views:
Transcription
1 + MarStand. Indicator Stands, Comparator Stands, Run out Testing Instruments Indicator Stands MarStand 815 GN With Cast Iron Base MarStand 815 MA / 815 MB / 815MG / 815 P With Magnetic Base Post & Support Arm Assemblies MarStand 815 XN / 815 XMA / 815 XMB / 815 XMS / 815 XMG / 815 XP With Mounting Thread and / or T-slot 8-5 Magnetic Bases MarStand 815 Y / 815 YP 8-5 Center Bench MarStand 818 With moveable Tail Stocks and Support Arms 8-6 Comparator Stands MarStand 820 N / 820 NC / 820 FC / 820 NG / 820 FG Small Version MarStand 821 NG / 821 FG Large Version MarStand 824 NT / 824 FT / 824 GT Heavy Version Modular Units MarStand 827 b 8-12
2 - 8- Indicator Stand 815 GN Rugged base ensures both maximum stability and sturdiness The upper side of the base has a convenient hand grip Moves easily over surfaces without vibration Front of the base is ground to allow movement of the stand along edges and rules Stable due to the three point support Support arm can be finely adjusted Indicator can be rotated through ± 90 b d a c e Total height Max. projection Post dia. Base Fine Mounting Weight Order no. with base of support arm surface adjustment hole (excludes a b c d e range indicating mm mm mm mm mm mm mm kg instrument) x H x H x H
3 + 8-3 Indicator Stand 815 MA with magnetic base Support arm with two joints Base has a powerful ON/OFF permanent magnet Magnetic force is active across the surfaces and the V-shaped bottom plus the front of the base Support arm can be finely adjusted 1 70 x 46 Total height V-way for Magnetic Fine adjust- Mounting Weight Order no. Order no. with base shaft dia. force ment range hole (excludes indicating wooden mm mm N mm mm kg instrument) case H Indicator Stand 815 MB with magnetic base ø14 ø Support arm with one joint Base has a powerful ON/OFF permanent magnet Magnetic force is active across the surfaces and the V-shaped bottom plus the front of the base Support arm can be finely adjusted Indicating instrument can be rotated through ± x 46 Total height V-way for Magnetic Fine adjust- Mounting Weight Order no. Order no. with base shaft dia. force ment range hole (excludes indicating wooden mm mm N mm mm kg instrument) case H
4 - 8-4 Indicator Stand 815 MG with flexible stem M10 Flexible in any direction, arm can be locked in position The sleeves and grounded steel balls of the stem are compressed with a strong steel cable Clamping force is adjustable Base has a powerful ON/OFF permanent magnet Magnetic force is active across the surfaces and the V-shaped bottom plus the front of the base Support arm can be finely adjusted Indicating instrument can be rotated through ± 90 Total height V-way for Magnetic Fine adjust- Mounting Weight Order no. Order no. with base shaft dia. force ment range bore (excludes indicating wooden mm mm N mm mm kg instrument) case H Indicator Stand 815 P with magnetic base -130 ø11 ø Support arm has one joint Sturdy circular base with permanent magnet Support arm can be finely adjusted Indicating instrument can be rotated through ± 90 ø Total height Magnetic Fine adjust- Mounting Weight Order no. with base force ment range bore (excludes indicating mm N mm mm kg instrument) ,5 8H7 0,
5 + 8-5 Post and Support Assemblies 815 X For application in inspection equipment for conducting length and concentricity (run-out) tests XN for mounting in a T-slot Two joints Knurled nut for clamping to the post Order no ø18 17 ø ø14 10,5 4,5 815 XMS especially stable version with mounting thread One joint Post height Order no. 285 mm mm ø25 M16 ø XMA with mounting thread Two joints Order no XMG with mounting thread Flexible in any direction, arm can be locked in position Order no M10 M XMB with mounting thread XP with mounting thread ø11 One joint ø One joint -130 ø Order no ø18 Order no ,5 M10 M8 x 0,75 Magnetic Bases 815 Y For the setting up of inspection equipment or as a base for adjusting devices on machine tools. 815 YM Standard Version Base has a powerful ON/OFF permanent magnet With threaded mounting hole V-groove in base Front is flat Magnetic force 450 N Order no M YP Round Version Permanent magnet plus threaded mounting hole Underside of the base is flat Magnetic force 250 N Order no ø M8 x 0, x 46
6 - 8-6 Center Bench 818 Ideal for quick and accurate concentricity / run-out checks Bench: Flatness of the surface is in accordance to DIN 876/1 Two T-slots for Tailstock and / or Support Arm Tailstock: Both Tailstocks can be relocated (slide into position) The Tailstock on the right side has a retractable (spring actuated) precision aligned center The Tailstocks have a peak height of 75 mm with a 90 prism for workpieces without a center, to a diameter of 20 mm (0.79 ) Support Arm 818 XNB: Support arm with one joint with fine adjustment Height of Distance Base size Lateral and/or height T-slot Weight Order no. centers between centers (L x W) difference of Tailstocks width (excludes indicating mm mm mm mm mm kg instrument) x 110 0,01 10H x 110 0,01 10H x 180 0,01 12H x 180 0,01 12H Center Bench 818 with V-support V-support Base size T-slot Weight Order n. height (L x W) width (excludes indicating mm mm mm kg instrument) x H x H x H Center Bench 818 with Roller support Roller support Base size T-slot Weight Bestell-Nr. height (L x W) width (excludes indicating mm mm mm kg instrument) x H x H x H
7 + 8-7 Modular Units 818 for individual center benches Accessories 818 pe V-support anvils in pairs Center height Dia. range Order no. mm mm 50 / pe 818 ab 818 pb V-support in pairs Height Dia. range T-slot Order no. width mm mm mm pb 818 ab Roller support in pairs Height Dia. range T-slot Order no. width mm mm mm Supporting table Center height Base size Order no. (L x W) mm mm x x / x Pointed support in pairs Center height mm Order no Support arm 818 XNB Center height Support Arm Order no. Dia. Length mm mm mm 50 /
8 - 8-8 Small Comparator Stands N Sturdy design Plate is made from either hardened steel or black granite or ceramic Rugged ground post made of stainless steel Fine adjustment, consisting of a strong, rigid parallel spring assembly (Small Comparator Stands 820 FG and 820 FC) Adjustable support arm of a indicating instrument ø ,5 H7 0,2/100 A ø50 A 35 a N Working Flatness Mountig Fine Weight Order no.* Remarks range tolerance hole adjustment a (DIN 876) range mm Grade mm mm kg 820 N steel 00 8H NG granite 0 8H FG granite 0 8H7 ± fine adjustment 820 NC ceramic 00 8H FC ceramic 00 8H7 ± fine adjustment * excludes indicating instrument
9 + 8- Small Comparator Stands FC 820 FG 820 FC 820 FG ø25 12 ø , ,5 80 A H7 0,2 100 A a 228, ,5 A H7 0,2 100 A 45 a Accessories V-Block 108 for checking small, cylindrical work pieces for out of roundness and polygon errors (for further details please refer to Page 12-9) Order no. 107 V (Single) (Pair)
10 Large Comparator Stands 821 Extremely sturdy design Plate is made from lapped black granite Heavy duty post and adjustable support arm for maximum stability Support arm has a fall brake Fine adjustment, consisting of a strong, rigid parallel spring assembly (Large Comparator Stand 821FG) Post and precision ground ø35 (ø50) ø25 (ø30) 2 (330) (500) 375 (675) mm (95-280mm) H7 0,2 100 A a 65 (105) A 35 (45) 70 (100) 200 (300) 300 (0) 821 FG Working Flatness Mounting Fine Weight Order no.* Remarks range tolerance hole adjustment a (DIN 876) range mm Grade mm mm kg 821 NG H H FG H7 ± Fine adjustment H7 ± Fine adjustment * excludes indicating instrument Accessories V-Block 108 for checking small, cylindrical work pieces for out of roundness and polygon errors (for further details please refer to Page 12-9) Order no. 107 V (Single) (Pair)
11 Heavy Comparator Stands 824 Basic Units Sturdy, T-shaped base which is made from a special cast iron Extremely stable Fine adjustment, consisting of a strong, rigid parallel spring assembly Support arm has a rotation lock, height of the arm via the toothed rack is adjustable Plates Measuring faces are hardened and lapped Longitudinal grooves Plates for sum measurements have a 8H7 mm mounting hole for Inductive Probes Precision Stand 824 NT Without fine adjustment Precision Stand 824 FT With fine adjustment, consisting of a strong, rigid parallel spring assembly Precision Stand 824 GT For Large Type Millimess. With fine adjustment by way of vertical movement of the mounting socket Basic Unit Working Mounting Fine adjust- Weight Order no.* range hole ment range mm mm mm kg 824 NT H FT H7 ± GT H7 ± * excludes indicating instrument, excludes plate Plates Plate size Flatness Mounting Weight Order no. Remarks tolerance hole mm µm mm kg 827 b x for single measurement 827 b x 1 8H for sum measurement 827 b x for single measurement 827 b 130 x H for sum measurement Accessories V-Block 108 for checking small, cylindrical work pieces for out of roundness and polygon errors (for further details please refer to Page 12-9) Order no. 107 V (Single) (Pair)
12 Modular Units 827 for individual comparator stands For the combination of comparator stands for special tasks, to adapt existing stands as well as the incorporation into inspection equipment for all types of length measurements. Base with Post 827 b 5 ø50 T-shaped base which is made from a special cast iron Post has a chrome finish Order no Support Arms 827 b 16 ø50 Mounting hole 8 mm Without fine adjustment Order no b 17 ø50 Mounting hole 8 mm Fine adjustment, consisting of a strong, rigid parallel spring assembly H7 H7 Order no b 18 ø28h7 ø50 Mounting hole 28 mm Order no b 19 H7 ø b 19 Support arm with dovetail guide Order no b 14 With probe holder, mounting hole 8 mm Order no b 14
13 Modular Units 827 for individual comparator stands Plates 827 b For single measurement Hardened and lapped Reversible Measuring surface has longitudinal grooves Flatness deviation 1 µm Order no b For sum measurement Measuring surface has longitudinal grooves, hardened and lapped With mounting hole 8H7 mm/.375 and a clamp for inductive probes Flatness deviation 1 µm Order no b For single measurement Large measuring surfaces which has longitudinal grooves, hardened and lapped Flatness deviation 1 µm Order no b For sum measurement Large measuring surfaces which have longitudinal grooves, hardened and lapped With mounting hole 8H7 mm/.375 and a clamp for inductive probes Flatness deviation 1 µm Order no. 827 Adjustable Stop 827 b Ensures that a work piece is correctly positioned To be attached to plates 827 b 31 and 827 b 32 Order no Attachment Stand 827 b 36 ø7,5 With adjustment screws for parallel alignment of 2 plan surfaces Particularly suitable for mounting Pin Gages 426 M To be attached to plates 827 b 31 and 827 b 32 Order
E905-WFMW + RP991BLMW E901-WFMW + RP995BLMW E905-WFMW + RP999MW
Magnetic Bases and Fitments Magnetic Bases All units are suitable for use with dial indicators and test dial indicators 900 and 901 versions both have push button ON/OFF control 905 model has a toggle
More information0513 Sinus rules V-blocks (pair) DIN. Specification. Special steel, hardened DIN 2273
0513 Sinus rules 2273 0513 001 2273 With sinus table 0513 011 Without stop type B With stop type A Roller spacing Length tolerance Ref. No. List price mm µm Euro 100 2 0513 001 139.00 200 4 0513 002 159.00
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationCOMPAC Dial Test Indicators
DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements.
+ Millimess. Digital Comparators 6- Inductive Digital Comparator µmaxµm ABS System 0 TOL RS232C Digimatic The most valueable electronic indicator for high production measurements. Inch/Metric operator
More informationtough. Live Centers Face Drivers 2013/2014
tough. Live Centers Face Drivers 2013/2014 www.roehm.biz LIVE CENTERS - FACE DRIVERS Revolving tailstock centres Basic 2005 Heavy 2009 Speed 2011 Slim 2012 Control 2014 Flex 2015 Revolving centering tapers
More informationMeasuring and testing equipment. Run-out testers Comparator stands Small measuring instruments
Run-out testers Comparator stands Small measuring instruments Benennung Artikel-Nr. Run-out testers Height of centres 50 mm height of centres 75 mm Benzing run-out testers consist of a base plate, a pair
More informationПОСТАВЩИК: Компания ООО"ИНТЕХСЕРВИС" ,г.Москва,ул.Гурьянова,д.2,корп.2 тел./факс: 8(499) E mail:
Calipers B-1 E LECTRONIC C ALIPERS DIN 862 (Style 1A-ZS) 0,01 0.0005 in LCD, 7 Floating zero TESA CAL IP67 magna µ system Patented measuring system TESA magna µ system New electronic caliper The highest
More informationTESATAST Standard Models
TESATAST Standard Models 0110005 0,01 0, 2 0 0,4 0 12,53 0110006 0,01 0, 3 0 0,4 0 12,53 0110007 0,01 0,5 2 0 0,25 0 36,53 011000 0,01 0,5 3 0 0,25 0 36,53 0110009 0,002 0,2 2 0 100 0 12,53 0110010 0,002
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More information0268 Gear tooth calipers
0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26
More informationOver 2 mm and. less than 10mm. 1/10 revolution /2 revolution ±9 ±5 ±6 ±3 ±5 ±6. One revolutions ±10 ±6 ±7 ±4 ±6 ±7
G1 Scale interval 0.01mm 0.002mm 0.001mm Measuring range 10mm max. 2mm max. Over 2 mm and less than 10mm 1mm max Over 1 mm and less than 2mm Over 2 mm and less than 5mm Retrace error 5 3 4 3 3 4 Repeatability
More information最終校 NEW! STANDARD TOOL RUN-OUT GAUGE SYSTEM. Made in Japan. Concentricity measurement by mounting your current indicator to this system.
236p 236p 236p 238p 238p 239p 239p 239p 240p 240p 240p 241p 241p 241p 242p 242p 243p 243p 244p 244p 245p 245p 246p 246p 246p 246p 247p 247p 248p 248p 248p 248p 249p 249p 250p 251p 252p 252p 253p V S 253p
More informationStraightness, Angle and Inclination Measurement
Straightness, Angle and Inclination Measurement Straightness, Angle and Inclination Measurement H-1 Straightness, Angle and Inclination Measurement Levels with Natural Measuring Base Mechanical instruments
More informationTHE PRODUCTION COMPARATOR STAND
845-454-3111 800-549-4243 THE PRODUCTION COMPARATOR STAND The Dorsey E1 comparator stand is specially designed for use in production and shop areas. The comparator stand has a large base and 3" throat
More informationDial Gauges. Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability.
Features Dial Gauges Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability. Standard steel test tip Ø 3.175mm, hardened stainless
More informationGauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
More informationMeasuring and testing equipment. Run-out testers Comparator stands Small measuring instruments
Run-out testers omparator stands Small measuring instruments ontents Tolerances 3 Run-out testers RP 50-200 / RP 75-200 4 Accessories for RP 50-200 / RP 75-200 5-7 RP 100-450 / RP 150-450 8 Accessories
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationHeight Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More information台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY
C1 C2 C3 Dial Gages (Small Bezel Dia) DG-9003S DG-9004S DG-9005S DG-9003S DG-9004S 0-3mm 0-4mm ψ40mm Aluminum Body ψ36mm Aluminum Body DG-9005S 0-5mm ψ40mm Aluminum Body Dial Gages (Normal) DG-9010A DG-9010R
More informationLIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
More information> clamping force up to kn. > operating pressure up to 500 bar. > piston with internal thread. > for push- and pull operation
Block CYLINDERS for VARIOUS DESIGN APPLICATIONS > clamping force up to 155.5 kn > operating pressure up to 500 bar > piston with internal thread > for push- and pull operation > with longitudinal and cross
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
More informationThickness Gages SERIES 547, 7
Technical ata Function of igital Models IS Types ON/OFF / mm onversion Origin ±irection hangeover SP Output attery Life: 20,000 hrs Power Supply: Silver Oxide ell (SR-44 1pc.) I Types ON/OFF / mm onversion
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationBall Rail Systems RE / The Drive & Control Company
Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationTURNING AND MILLING IN ONE SET-UP
TURNING AND MILLING IN ONE SET-UP Application example - face driver CoE in combination with a revolving live centre. Turning and milling workpieces in one set-up. Video CoE 2036 CONSTANT FACE DRIVERS The
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationConventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 20 D. Universal lathes with toolmaking precision for industrial applications
Conventional Lathes MAT 14S/14D MAT 17 S MAT 17 D MAT 2 D Universal lathes with toolmaking precision for industrial applications EMCOMAT 14 S/14 D EMCOMAT 17S/17D/2D The Technology The EMCOMAT 14 S/14
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationDial and Electronic. Indicators Gauges
Dial and Electronic Indicators Gauges 37 AGD Group 2 2900 Electronic Indicators Innovative, Full Featured & Tough 2900 Electronic Indicators are available in a choice of configurations to meet a range
More informationEconomy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.
Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be
More informationElectronic Length Measuring Equipment
Electronic Length Measuring Equipment N-1 TESA LENGTH MEASURING EQUIPMENT WITH INDUCTIVE PROBES TESA offers a complete family of value sensors (electronic probes) as well as dedicated measuring instruments
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationZERO-POINT CLAMPING SYSTEM
simple. gripping. future. ZERO-POINT CLAMPING SYSTEM 22 Quick Point Grid Plates 3 Quick Point Plates 34 Quick Point Round Plates 39 Quick Point Adaptor Plates 4 Quick Point Clamping Studs 43 Quick Point
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More informationHydraulic clamping elements
Hydraulic clamping elements hydraulic 3 Contents Product group 3 Hollow piston cylinder single-acting 3.1403 3.2130 Sliding clamp single-acting compact classic 3.2202 3.2204 Angular clamping element single
More informationL éditorial. Robert Renaud
L éditorial Dear Customer, This first part of our flyer is usually reserved to our President, Mr. Christophe Bevillard but, exceptionally, I would like to address this editorial and furthermore introduce
More informationDial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Dial Test s Comparison measuring instruments which ensure high quality, high accuracy and reliability. SERIES 513 ever-type Dial s eature icons Designed to probe surfaces that cannot be reached with a
More informationCam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationSUBITO -Precision Bore Measuring Instrument
Precision Bore Measuring Instrument for measuring internal diameters, application 4,5 00 mm SU/SK/SW SERIES 1 ANDARD VERSION SERIES SU w. inspection certificate Delivery: Holder, fixed measuring pins,
More informationStandard Scales SERIES 182 Made of Low-Expansion Glass. Working Standard Scales SERIES 182 E-32
Standard Scales SERIES 182 Made of Low-Expansion Glass High-precision glass scales manufactured under Mitutoyo s leading-edge Linear Scale production technology. High accuracy is guaranteed to be used
More informationWILTON SAWING. Horizontal Bandsaw s Vertical Bandsaws Cold Saws Cold Saw Blades Accessories... 32
Horizontal Bandsaw s........................... 18 Vertical Bandsaws.............................. 24 Cold Saws.................................... 27 Cold Saw Blades............................... 31
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationCam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationCollet chucks KSZ-MB KSZ-NZ KSZ-AZL NEW NEW SMW-AUTOBLOK 147. Группа компаний "Штрай" Москва, ул. Островитянова, 13
Collet chucks KSZ-MB Collet chuck Power operated collet chucks for bar machining quick collet change Page 148 KSZ-DZ Draw collet chuck for bars KSZ-AZ Draw collet chuck with workstop Page 152 Page 155
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationBALL VALVE Type HKSF-W
BALL VALVE Type HKSFW 1.2.2.1 Ball Valve Type HKSFW Description of construction The RMA ball valves of the HKSFW type are of fully welded, maintenancefree design. HKSFW ball valves are available in three
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INDIVIDUALLY ADJUSTABLE The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More information200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until
3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier
More informationRZP. 3-jaw centric gripper
RZP Centric gripper with high precision and tried and tested T-groove. Simple interface master jaw / top jaw with 2 centring sleeves and 2 screw threads. 1. Body Tried and tested T-groove gripping guide
More informationHollow Spindle Oil Country Lathes
Hollow Spindle Oil Country Lathes XL12B Spindle Bore 315mm DBC 1500, 2000, 3000, 4000, 5000, 6000 mm Supplied with 3 Jaw Chucks XL12B Chuck Gripping range 250-380 mm XL14B Chuck Gripping Range 155-400
More informationJET FINISHING. Surface Grinders Bench Grinders Accessories
Surface Grinders.............................. 120 Bench Grinders............................... 122 Accessories................................... 122 119 6"x18" PRECISION MANUAL SURFACE GRINDER FINISHING
More informationCoA. Constant Face Drivers. Constant Face Drivers CoA
CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting
More informationKFE. Power-operated compensating chuck. Techincal features
Power-operated compensating chuck Techincal features Toggle joint lever system Compensation for eccentricities is accomplished by means of a universal ball joint. Large through-hole Made of steel All moving
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More informationCast iron wheels and castors
Cast iron wheels and castors 318 we innovate mobility www.blickle.com Table of Contents G L LK LU LH LT LO LS Series Page G 80-250 mm 250-1400 kg 320 321 L-G 80-200 mm 200-350 kg LK-G 80-200 mm 250-600
More informationPortal modules.
Portal modules www.comoso.com www.comoso.com Portal modules PORTAL MODULES Series Size Page Portal modules PMP 114 PMP 16 118 PMP 25 124 EPM 130 EPM 37 138 EPM 48 146 The SCHUNK program offers linear technology
More informationTechnical Data, Dimensioning, Mounting
6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationPin Packages Section.Page. Series. Dimensions and technical information are subject to change without notice. Air Consumption at 5 bar [dm3]
Pin Packages 6. Pushing Force (N) at 5 bar Retracting Force at 5 bar Piston Diameter Weight Air Consumption at 5 bar [dm3] Application Area Series Section.Page 0 to 500 [N] 500 to 000 [N] 000 to 500 [N]
More informationComponents for parallel kinematics
Components for parallel kinematics Series GLK, GLK 2, GLK 3 and GLAE Parallel kinematic components consist of a number of parallel, longitudinally adjustable mechanical struts that are arranged between
More informationMulti-Purpose Milling Machine
Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationPerformance: Spiral Bevel Series
Performance: Spiral Bevel Series GAM can. If you don t see exactly what you need, let us know. We can modify the VC Series gearboxes to meet your needs. Page provides a list of commonly requested modifications
More informationWIDE OPENING PARALLEL GRIPPER
News 2001 S E R I E S CGL Wide Opening Parallel Gripper Series CGL Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The wide opening parallel gripper mod. CGL is available in 5 different sizes and has
More informationtesting and measuring instruments for vehicle wheels
testing and measuring instruments for vehicle wheels en testing and measuring instruments for vehicle wheels For more than 20 years MAKRA has been manufacturing measuring and testing equipment for the
More informationCHIARAVALLI Trasmissioni spa
INDEX Sprockets - Platewheels pag. 2 Asa sprockets - platewheels pag. 20 Duplex platewheels for two simple chains pag. 26 Stainless steel sprockets - Aisi 304 L - Simplex sprockets hardened teeth pag.
More informationKONEX Pneumatic Modular Gripping System KONEX Gripping force Torque Piston force (extended)
KONEX Gripping force 100 N Torque 0.9 Nm Piston force (extended) 250 N Application example KONEX weight-reduced, modular gripping system for economical automation in assembly and production KONEX P 50
More informationLinear Bushings and Shafts Inch Series
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Linear Bushings and s Inch Series The Drive and Control Company
More informationDie changing technique
Die changing Die changing 8 Contents Product group 8 Roller bar, hydraulically lifted for heavy loads (400 bar), lifting of the complete roller bar for medium loads (120 bar), lifting of individual rollers
More informationVarious duties efficiently solved EMCOMAT E-300 E-360 E-400. [ means:
[ E[M]CONOMY] means: Various duties efficiently solved EMCOMAT E-300 E-360 E-400 Cycle-controlled lathes with high-powered cutting performance and maximum precision EMCOMAT E-300 [Headstock] - Siemens
More informationThickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
More informationMILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models
Since 1977 MILLING MACHINES A wide range of models to select from light to heavy duty models SHIAN RONG JING JI CO., LTD. No. 95, Ln. 61, Dafu Rd., Shengang Dist.,Taichung City 429, Taiwan. TEL: 886-4-2523
More informationEnerpac Hydraulic Presses
Enerpac Hydraulic es ENERPAC Hydraulic es are available in a variety of capacities and sizes. The press frames are designed for maximum strength and durability. Strong frames and powerful highpressure
More information8710 EN. Potentiometric Displacement Sensors. Models 8710, 8711
Potentiometric Displacement Sensors Models 8710, 8711 Code: Delivery: Warranty: 8710 EN ex stock 24 months Model 8711 Model 8710 Application Displacement sensors models 8710 and 8711 with resistance tracks
More informationChuck size
URO-T / URO A Exterior form incl. splash water edge URO-T Technical features RÖHM URO-T Manual chucks: 20% higher clamping forces Chuck body stiffer (guarantees precision at higher loads) Surface of chuck
More informationCHAIN ENDS acc. DIN 764 / 766 Dimensions
CHAIN ENDS acc. DIN 764 / 766 Dimensions DIN 764 ESD64250 ESD64300 Nominal Outside Weight per Breaking Pitch N of links Proof load diameter width chain end load Proof load Breaking load d [mm] t [mm] b
More informationPOWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
More informationMGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
More informationHM 1 - HM 10. Horizontal Balancing Machines
HM 1 - HM 10 Modular structure Quick change-over from workpiece to the next High balancing accuracy Infinitely variable DC drive Optimum operating height Installation without bolting Protective device
More informationCompact Slide. Series MXH ø6, ø10, ø16, ø20
Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations
More information8000 AE 0 - AE 4 CIRCLIP PLIERS FOR EXTERNAL RETAINING RINGS
PLIRS RG Circlip pliers for external retaining rings (shafts) 8000 Flattened tip mounting makes it easier to get at the safety ring eyelets Precision, screwed joint. The screw ensures ease in re-adjusting
More informationSHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
More informationLive and Dead Centres
s w i t z e r l a n d Live and Dead Centres 1. Live-Centres 1.1 Main-Line ROTOR Main-Line, the approved top of the range for lathes and grinding machines. Very precise and robust construction. Made for
More informationThis is trial version
Z-Standards Contents (Alphabetical order, terms partly according to DIN 16750) A All dimensions shown in this catalogue are specified in mm, given tolerances refer to an ambient temperature of 20 C Prod.-No.
More informationDIN 950. Spoked handwheels. d 2. l 3. d 3. l 1. Operating elements. Cast iron / Aluminium. SPECIFICATION Types
DIN 0 RoHS Cast iron / Aluminium SPECIFICATION Types Type A: without handle Type F: with fixed handle Type D: with revolving handle Bore codes Version B: without keyway Version K: with keyway Version V:
More information8 (800) (звонок бесплатный) Length tolerances for shafts to DIN 7168, medium series.
2 Guiding systems Fig 20 SKF precision shafts ( fig 20 ) can be supplied either as solid or hollow shafts. The solid shafts are available in all dimensions required to fit SKF linear ball bearings; the
More information