8000 AE 0 - AE 4 CIRCLIP PLIERS FOR EXTERNAL RETAINING RINGS

Transcription

1 PLIRS RG Circlip pliers for external retaining rings (shafts) 8000 Flattened tip mounting makes it easier to get at the safety ring eyelets Precision, screwed joint. The screw ensures ease in re-adjusting the pliers legs. Contoured anti-slip handles stop your hands from slipping Secure tip thanks to keyed press-fixing in the pliers head With no retaining groove in the tips, the safety ring cannot be inadvertently bent and it remains absolutely flat. In addition no weakening of the tips from a retaining groove (notching-induced rated breaking point). Large contact surface for the safety ring stops it becoming twisted Wear-resistant and accurate! - The hardened and specially inserted tip is of high-grade roller bearing steel and absolutely cylindrical. secure internal spring makes work easier with circlip pliers TIP This thus lessens safety ring twisting! lways ensure that the fitting side is the right one when installing safety rings. The safety ring "eyelets" are stamped and thus they are slightly conical. To stop any ring twisting, the narrower side of the eyelets* should rest on the pliers. * The bevel-free side is also the narrower side of the eyelets XTRL RTIIG RIGS Form For safety rings as per DI 471, DI 983 DI 5254 Form Straight jaws Inside-positioned opening spring Pliers basic body in GDOR chrome-vanadium special steel Pressed-in tips of highly wear-resistant roller bearing steel Steel-grey with red-dipped anti-slip handles /32-3/ / /4-2.3/ / /8-5.1/

2 XTR- L RTIIG RIGS G - 2G XTR- L RTIIG RIGS Form For safety rings as per DI 471, DI 983 DI 5254 Form 90 angled jaws Inside-positioned opening spring Pliers basic body in GDOR chrome-vanadium special steel Pressed-in tips of highly wear-resistant roller bearing steel Steel-grey with red-dipped anti-slip handles For shafts without groove For retaining rings Seeger as well as enzing Similar to DI 5254 Form 0G - 1G = tips angled 30 2G = straight tips With opening spring and adjusting screw to limit opening High degree of assembly reliability, the limit opening rules out any over-tensioning of the smallest of retaining rings lack, with red dipped handles /32-3/ / /4-2.3/ / /8-5.1/ for Seeger circlips for enzing clamping circlips L L 2 1,5-3,5 1,5-3, G 4,0-9,0 3,0-11, G 10,0-15,0 12,0-16, G G - 21G XTR- L RTIIG RIGS XTR- L RTIIG RIGS Form For shafts without groove For retaining rings Seeger as well as enzing Similar to DI 5254 Form 90 angled tips With opening spring and adjusting screw to limit opening High degree of assembly reliability, the limit opening rules out any over-tensioning of the smallest of retaining rings lack, with red dipped handles For retaining rings as per DI 471, DI 983 DI 5254 Form Straight tips With opening spring With clamping protection lack, with red dipped handles for Seeger circlips for enzing clamping circlips L L 2 1,5-3,5 1,5-3, G 4,0-9,0 3,0-11, G 10,0-15,0 12,0-16, G /32-3/ / /4-2.3/ / /8-5.1/

3 PLIRS RG XTRL RTIIG RIGS Form XTRL RTIIG RIGS For retaining rings as per DI 471, DI 983 DI 5254 Form With opening spring With clamping protection lack, with red dipped handles Similar to DI 5254 Form 45 angled tips With opening spring With clamping protection lack, with red dipped handles /32-3/ / /4-2.3/ / /8-5.1/ /32-3/ / /4-2.3/ / /8-5.1/ XTRL RTIIG RIGS XTRL RTIIG RIGS Straight tips lack, tips and lock lever zinc-plated The toothed bracket stops the pliers legs from straddling beyond the permitted working area This ensures safe working even in hidden fitting positions Locking pin can be replaced on-crush type release-lever with handle recesses, red dip-insulated = pair of spare tips Tips and lock lever zinc-plated Lever handle-end red dip-insulated Finger protection Reinforced safety arms = pair of spare tips F d y 0 Code o /8-5.1/ L / / / / L F d y 0 Code o /8-5.1/ L / / / / L S S

4 Circlip pliers for internal retaining rings (bores) 8000 J 0 - J 4 ITRL RTIIG RIGS Form C 8000 J 01 - J 41 ITRL RTIIG RIGS Form D For safety rings as per DI 472, DI 984 DI 5256 Form C Straight jaws Pliers basic body in GDOR chrome-vanadium special steel Pressed-in tips of highly wear-resistant roller bearing steel Steel-grey with blue-dipped anti-slip handles For safety rings as per DI 472, DI 984 DI 5256 Form D 90 angled jaws Pliers basic body in GDOR chrome-vanadium special steel Pressed-in tips of highly wear-resistant roller bearing steel Steel-grey with blue-dipped anti-slip handles /8-9/ J / J /4-2.3/ J / J /8-5.1/ J /8-9/ J / J /4-2.3/ J / J /8-5.1/ J J 0 - J 4 ITRL RTIIG RIGS Form C 8000 J 01 - J 41 ITRL RTIIG RIGS Form D For retaining rings as per DI 472, DI 984 DI 5256 Form C Straight tips lack, with blue dipped handles For retaining rings as per DI 472, DI 984 DI 5256 Form D lack, with blue dipped handles /8-9/ J / J /4-2.3/ J / J /8-5.1/ J /8-9/ J / J /4-2.3/ J / J /8-5.1/ J CT

5 PLIRS RG 8000 J 02 - J 42 ITRL RTIIG RIGS Similar to DI 5256 Form D 45 angled tips lack, with blue dipped handles /8-9/ J / J /4-2.3/ J / J /8-5.1/ J J 4 - J 6 ITRL RTIIG RIGS Straight tips lack, tips and lock lever zinc-plated The toothed bracket stops the pliers legs from straddling beyond the permitted working area This ensures safe working even in hidden fitting positions Locking pin can be replaced J = pair of spare tips on-crush type release-lever with handle recesses, blue dip-insulated 3.2/3.5/4.5 mm tip diameters available for 85 to 400 mm rings. odels for internal and external retaining rings Release lever for controlled slackening of the tension Ratching mechanism for easing the work of the user when fitting the retaining rings 8000 J 4 - J 6 ITRL RTIIG RIGS 8000 J 41 - J 61 ITRL RTIIG RIGS lack, tips and lock lever zinc-plated Lever handle-end blue dip-insulated Finger protection Reinforced safety arms J = pair of spare tips C D d y 0 Code o /8-5.1/ J 4 L / / J / / J J 4 L J J 6 C D d y 0 Code o /8-5.1/ J 41 L / / J / / J J 41 L J J 61

6 Circlip pliers for retaining rings (parallel) 8005 PLIRS FOR XTRL RTIIG RIGS For shafts Supplied with four different clamping tips For holes from 4.5 to 5.9 mm and rings from 305 to 500 mm The circlip is securely clamped before removal by choosing a suitable distance between the clamping tips. This means that unnecessary plier movement is avoided, and the circlip may be opened completely. The special parallel movement of the clamping tips and their recesses in the direction of the pressure applied ensure that the circlip will be clamped firmly. Release lever for controlled slackening of the tension Paralleled jaws for the greatest possible safety and torsion-free clamping Ratching mechanism for easing the work of the user when clamping the retaining rings 8005 XTRL RTIIG RIGS Q P y 0 Code o , J SPR TIPS for internal retaining rings (per piece) Selection aid: The spacing of holes for non-tensioned circlips is normally between 80 mm and 140 mm The tips used to spread the rings are fitted to match the opening width of the non-tensioned circlip Opening widths mm: Combination tips J and J Opening widths mm: Combination tips J and J Opening widths mm: Combination tips J and J Opening widths mm: Combination tips J and J SPR TIPS for external retaining rings (per piece) Selection aid: The spacing of holes for non-tensioned circlips is normally between 20 mm and 50 mm The tips used to spread the rings are fitted to match the opening width of the non-tensioned circlip Opening widths mm: Combination tips and Opening widths mm: Combination tips and Opening widths mm: Combination tips and Code o Code o J ITRL RTIIG RIGS For bores Supplied with six different clamping tips The circlip is securely clamped before removal by choosing a suitable distance between the clamping tips. This means that unnecessary plier movement is avoided, and the circlip may be opened completely. The special parallel movement of the clamping tips and their recesses in the direction of the pressure applied ensure that the circlip will be clamped firmly. 0 Code o J J J J 0 Code o J J C Q P y 0 Code o , J

7 PLIRS RG Circlip pliers X-GRIP 8006 X-GRIP Particularly versatile: Universal circlip pliers for risk-free gripping and fitting of internal and external circlips (DI 471/472) from 252 to 1000 mm diameter Particularly suited for working in confined spaces. Instead of using a long lever, the required force is transmitted by a threaded spindle. This ensures safe, fatigue-free gripping. Operated by a 15 mm open ended spanner or a 3/8 ratchet (e.g Z-94) Solid, hardened sliding bar ensures parallel tip action Stop lugs reliably prevent circlips slipping off Quick changeover between internal and external circlips by rotating tips through 180 Tips made from tempering steel, carefully hardened and annealed, easy to replace 3/8" square drive for attaching a 3/8" ratchet Paralleled jaws for the greatest possible safety and torsion-free clamping Hexagon bolster size 15 mm for use with open ended spanner 2C-handle for best-possible gripping 8006 X-GRIP CIRCLIP PLIRS Q P 0 Code o , S 8006 X-GRIP CIRCLIP PLIRS ST Universal circlip pliers for risk-free gripping and fitting of internal and external circlips (DI 471/472) from 252 to 1000 mm diameter Plier with adaptor, basic body - no. 1/2 + tip Ø 5.9 mm and no. 3/4 + tip Ø 4.5 mm Special tools for changing tips and adaptors Single open ended spanner no Hexagon socket key no mm 4 Spare threaded pins 4x4 Plastic box P Ratchet no Z-94 (for quick adjustment) Rugged sheet steel case with foam insert X-GRIP PRTS 0 Code o S 8006 Description 0 Code o. asic body no. 1 with spare tip 5.9 mm Ø asic body no. 2 with spare tip 5.9 mm Ø asic body no. 3 with spare tip 4.5 mm Ø asic body no. 4 with spare tip 4.5 mm Ø Spare tip 4.5 mm Ø X 4,5 Spare tip 5.9 mm Ø X 5,9 Spindle with spindle bearing, 265 mm long X