JET FINISHING. Surface Grinders Bench Grinders Accessories

Transcription

1 Surface Grinders Bench Grinders Accessories

2 6"x18" PRECISION MANUAL SURFACE GRINDER FINISHING 6"x18" PRECISION MANUAL SURFACE GRINDER Base, saddle, table and column feature high quality cast iron Table action by cogged timing belt system Table travels on precision roller balls Double V roller tracks are over 19 inches apart Over 300 pound capacity on table Motor is dynamically balanced allowing spindle run-out within.0008" 24V controls feature overload protection Automatic continuous lubrication of table ways Adjustable longitudinal table stops and cross feed lock are featured Cabinet stand allows tool storage area STANDARD EQUIPMENT Complete coolant system Balancing arbor Halogen work lamp Grinding wheel Wheel flange Diamond wheel dresser Leveling blocks Wheel extracting screw Tool box OPTIONAL EQUIPMENT 6x12 Magnetic Chuck x18 Magnetic Chuck Overhead diamond wheel dresser Rotary Phase converter NOTE: Use of static phase converter will void warranty Model Number JPSG-618M1 Table Size (in.) 6 x 18 Grinding Capacity (in./w x L) 7 x 19 T-slots, (Number) Size (in.) (1) 9/16 Longitudinal Table Travel (max./in.) 20 Cross Table Travel (max./in.) 7-3/4 Cross Handwheel Graduation (in.).0005 Cross Handwheel per Revolution (in.).02 Spindle Centerline to Table (max./in.) 18 Vertical Handwheel Graduation (in.).0001 Vertical per Handwheel Revolution (in.).05 Spindle Speed (RPM) 3,450 Wheel Diameter (max./in.) 8 Wheel Thickness (max./in.) 3/4 Wheel Center Bore (in.) 1-1/4 Motor 2HP, 230/460V, 3Ph Prewired 230V Overall Dimensions (in./w x D x H) 74 x 45 x 68 Net Weight (lbs.)

3 FINISHING PRECISION AUTOMATIC SURFACE GRINDERS PRECISION AUTOMATIC SURFACE GRINDERS Base, saddle, table and column feature high quality cast iron Fully automatic operation in 3-axis Vertical feed features hydraulic 3-step selection Rapid vertical motor increases work efficiency Slide ways are hand scraped and Turcite coated allowing smooth operation Spindle incorporates (4) class 7 bearing for high accuracy Automatic continuous lubrication system with low oil warning lamp Hydraulic tank features a heat exchanger to maintain operating temperature Low voltage controls include overload protection Convenient central control panel includes all buttons and switches Model Number JPSG-1020A JPSG-1224A Table Size (in.) 8 x x 24 Grinding Capacity (in./w x L) 8-1/4 x 21-5/8 12-3/16 x 25-1/2 T-slots, (Number) Size (in.) (1) 1/2 (1) 1/2 Maximim Table Load (lbs.) Longitudinal Manual Table Travel (max./in.) Longitudinal Auto. Table Travel (max./in.) 22-3/8 25-9/16 Longitudinal Table Speed (FPM) Cross Table Travel (in.) 8-13/ /16 Cross Handwheel Graduation (in.) Cross Handwheel per Revolution (in.).2.2 Cross Feed per Auto. Pass (in.) Spindle Centerline to Table (max./in.) 16-5/16 20 Vertical Handwheel Graduation (in.) STANDARD EQUIPMENT Electromagnetic chuck Complete coolant and dust collection system Hydraulic motor and pump Wheel balancing base Halogen work lamp Balancing arbor Grinding wheel Wheel flange Diamond wheel dresser Leveling blocks Wheel extractor Tool box OPTIONAL EQUIPMENT Rotary Phase converter NOTE: Use of static phase converter will void warranty. Vertical per Handwheel Revolution (in.) Auto. Vertical Downfeed Steps (in.).00008,.00024, ,.00024,.0004 Wheel Diameter (max./in.) 8 12 Wheel Thickness (max./in.) 3/4 1-1/4 Wheel Center Bore (in.) 1-1/4 3 Spindle Speed (RPM) 3,450 1,725 Cross Feed Motor 1/5HP 1/5HP Elevating Motor 1/4HP 1/4HP Hydraulic Motor 1HP 2HP Main Motor (TEFC) 2HP, 230/460V, 3Ph, prewired 230V 3HP, 230/460V, 3Ph, prewired 230V Overall Dimensions (in./w x D x H) 100 x 62 x x 76 x 89 Net Weight (lbs.)

4 FINISHING ACCESSORIES AND BENCH GRINDERS FINISHING MAGNETIC CHUCKS Holds workpiece securely by means of a strong magnetic field Standard pole pattern for general purpose uses Magnetic pull can be switched on/off by means of a single lever Model Number JMC-612 JMC-618 Surface Diameter (in.) 6 x 12 6 x 18 Pole Size (in.) 15/32 15/32 Overall Dimensions (in./lxwxh) 12-5/8 x 6-1/4 x 2-3/4 18-1/2 x 6-1/4 x 2-3/4 Net Weight (lbs.) OVERHEAD DIAMOND DRESSER Specially designed for JPSG-618M Allows wheel dressing with work piece in place Mounts to preexisting holes Includes diamond BENCH GRINDER STAND Heavy-duty cast iron construction provides strength and durability Wide stance base gives you a stable grinder workstation Coolant tank and tool tray are on an adjustable platform for your convenience Model Number BENCH GRINDERS JPS-2A Mounting Surface (L x W/in.) 11 x 10 Overall Height (in.) 31 Net Weight (lbs.) 46 Cast iron motor housing and totally enclosed permanently lubricated ball bearings ensure longer life Steel tool rests adjust to accommodate your needs Adjustable acrylic eye shields deflect sparks away from operator Gooseneck light fixture illuminates your work for better results Includes one fine and one coarse vitrified grinding wheel for grinding and sharpening tasks Model Number JBG-150 JBG-200 Shaft Diameter (in.) 1/2 5/8 Wheel Dimensions (in./dia.xw) 6 x 3/4 8 x 3/4 Wheel Speed (RPM) 3,450 3,450 Wheel Grits 36/60 36/60 Motor 1/3HP, 1Ph, 115V 1/2HP, 1Ph, 115V Overall Dimensions (in./l x W x H) 17 x 8 x 10-1/2 17-1/4 x 9 x 11-1/2 Net Weight (lbs.)

5 FINISHING INDUSTRIAL BENCH GRINDERS AND WHEELS INDUSTRIAL BENCH GRINDERS UL Listed Totally enclosed, pre-lubricated ball bearings Heavy-duty guarded toggle switch on 8" and 10" Rubber mounts prevent movement STANDARD EQUIPMENT Cast iron wheel guards and dust vents One-piece quick adjusting spark guards Large eye shields with quick adjustment Adjustable tool rests Fine and coarse vitrified grinding wheels included Model Number JBG-6A JBG-8A JBG-10A Shaft Diameter (in.) 1/2 5/8 1 Wheel Diameter (in./dia.xw) 6 x 3/4 8 x 1 10 x 1 Wheel Speed (RPM) 3,450 3,450 1,725 Wheel Grits 36/60 36/60 24/46 Motor 1/2HP, 1Ph, 115V 1HP, 1Ph, 115V 1-1/2HP, 1Ph,115V Overall Dimensions (in./lxwxh) 18 x 8-1/2 x 10-1/2 19 x 10 x 12-1/2 24-1/2 x 13 x 12-1/4 Net Weight (lbs.) See WILTON Bench Grinders on page 288 WIRE WHEEL BRUSHES Premium-duty, high-density crimped wire for superior performances Low flexibility, fast cutting, long life Excellent for cleaning operations and for surface finishing Multi-bore brushes come standard with (2) 1/2", (1) 5/8", (1) 3/4", (1) 7/8" set of bushings (W10-14 has 1" bore only) MODEL DIAMETER (IN.) FACE (W/ IN.) WIRE GAUGE MAXIMUM RPM W / W W W DRILL AND TOOL SHARPENING WHEELS Wheels have Type 1 white aluminum-oxide grain and vitrified bond for sharpening drill bits and other tools All wheels include telescoping bushings for 1/2", 5/8", 3/4", or 1" diameter shafts. SIZE (DIA. X THICKNESS/IN.) GRIT MAXIMUM RPM x 3/4 AA46Q5V x 3/4 AA60Q5V x 1 AA46Q5V x 1 AA460Q5V x 1 AA46Q5V x 1 AA60Q5V

6 GRINDING WHEELS FINISHING BENCH GRINDING WHEELS Industrial-quality wheels have aluminum-oxide grain and vitrified bond for use on all types of ferrous metals All wheels include telescoping bushings for 1/2", 5/8", 3/4", or 1" diameter shafts SIZE (DIA. X THICKNESS/ IN.) GRIT MAXIMUM RPM x 3/4 A24Q5V x 3/4 A36Q5V x 3/4 A46Q5V x 3/4 A60Q5V x 1 A24Q5V x 1 A36Q5V x 1 A46Q5V x 1 A60Q5V x 3/4 A24Q5V x 3/4 A36Q5V x 3/4 A46Q5V x 3/4 A60Q5V x 1 A24Q5V x 1 A36Q5V x 1 A46Q5V x 1 A60Q5V x 1 A24Q5V x 1 A36Q5V x 1 A46Q5V x 1 A60Q5V 2483 CARBIDE BENCH GRINDING WHEELS For sharpening carbide tools Green silicon carbide Type 1, vitrified bond Available in the following grits: GC60/Coarse; C80/Medium; GC100/ Medium Fine; GC120/Fine Wheels 1" thick or less include telescopic bushings for 1/", 5/8" 3/4", or 1" diameter shafts SIZE (DIA. X THICKNESS/IN.) GRIT MAXIMUM RPM x 3/4 GC60J5V x 3/4 GC80J5V x 3/4 GC100J5V x 3/4 GC120J5V x 1 GC60J5V x 1 GC80J5V x 1 GC100J5V x 1 GC120J5V x 1 GC60J5V x 1 GC80J5V x 1 GC100J5V x 1 GC120J5V x 1 GC60J5V x 1 GC80J5V x 1 GC100J5V x 1 GC120J5V