最終校 NEW! STANDARD TOOL RUN-OUT GAUGE SYSTEM. Made in Japan. Concentricity measurement by mounting your current indicator to this system.

Transcription

1 236p 236p 236p 238p 238p 239p 239p 239p 240p 240p 240p 241p 241p 241p 242p 242p 243p 243p 244p 244p 245p 245p 246p 246p 246p 246p 247p 247p 248p 248p 248p 248p 249p 249p 250p 251p 252p 252p 253p V S 253p 254p 254p 255p 256p 257p 257p 258p 最終校 07_ 規範工具.indd p 256p CMYK 2017/03/15 15:56

2 RUN-OUT GAUGE SYSTEM NEW! ROG-101S, ROG-103S Made in Japan. Concentricity measurement by mounting your current indicator to this system. HOW TO MOVIE Measuring instruments Measuring instruments Dial Gauge Test Indicator P With aluminum carrying case P206 P For multiple measurement Magnetic Base P ROG-223SS ROG-351LS ROG-101S V S 236 最終校 07_ 規範工具.indd 236 CMYK 2017/03/15 15:57

3 Base type 3 kinds 98 Long base Allows simultaneous multiple measurements using magnetic base mounted gauges Magnetic base can be mounted on the base Approx. 6.5 Roller with slit. Ideal for measuring flanged workpiece. 6 mm Flat Roller mm Clamp base Can be mounted on stage of large measuring instruments Plain roller type. Ideal for a measuring round bar. Shaft Carrier Shaft slide carrier can be positioned along length of workpiece Linear Carrier 31 mm PP Carrier type 3 kinds Basic type no carrier Slit Roller Compact type 236 ROG-101S, ROG-103S Roller type 2 kinds Short base mm NEW! Linear slide carrier provides smooth movement for accurate positioning Concentricity measurement by mounting your current indicator to this system Three base types, Two roller types, and instrument available in three options, for a total of 14 available configurations Up to 2μ accuracy. Offers a high level of measurement precision. Smooth measurement with grip handle and timing belt & pulley operation system Carrier angle fine adjustment for easy zero point setting of the measuring instruments. Free movement in Z-direction provides an ideal measurement position. Equipped with work retainer for holding front and rear of workpiece and to enable measurement of axial run-out Base: Carbon steel Roller: Tool steel Accuracy: within 2-3.5μm 2μm=when measuring φ20mm workpiece Provided with carrying case MEASURING CONDITION precision roller for measurements under φ4 optional OD of workpiece: φ4-30mm of workpiece: 5-80mm Shape of workpiece: Cylindrical Reference portion of the workpiece must have enough length to clamp to roller Measurement error increases at with increasing distance from rollers Base type Roller type ROG-221S ROG-221SS ROG-221LS ROG-223S ROG-223SS Carrier type Basic type no carrier 4.0kg 4.3kg Basic type no carrier 3.7kg Shaft Carrier 4.1kg ROG-223LS Linear Carrier 4.4kg ROG-351S Basic type no carrier 4.6kg ROG-351SS ROG-351LS ROG-353S ROG-353SS ROG-353LS NEW! ROG-101S NEW! ROG-103S Short base Flat Roller Slit Roller Long base Flat Roller Clamp base Slit Roller Flat Roller Shaft Carrier 5.0kg Linear Carrier 5.3kg Basic type no carrier 4.7kg Shaft Carrier 5.1kg Linear Carrier 5.4kg Basic type no carrier V S 3.6kg Shaft Carrier Slit Roller Linear Carrier RUN-OUT GAUGE SYSTEM 2.5kg 2.6kg 237 最終校 07_ 規範工具.indd 237 CMYK 2017/03/15 15:57

4 NEW! Ideal for measuring outer diameter of small precision parts. Use with electric micrometer or digital indicator. Measuring instruments P P207 Digital Indicators Indicator NOT included Stage 0D[ BT-10-SET kg NEW! BT-CA per piece 1g After replacing anvils, parallelism adjustment of anvils is required with dedicated lapping device LD-SET Replacement anvils for bench table NEW! After replacing anvils, parallelism adjustment of anvils is required with dedicated lapping device LD-SET per piece 1g BT-KA04 Replacement cylindrical anvils (φ1.5mm) for Bench Table BT-10-SET Carbide φ1.5mm cylindrical anvils tip: flat face, 2 pcs/set 2.2 Replacement anvils for bench table NEW! BT-KA07 Replacement knife-shaped anvils 0.4mm thickness for BT-10-SET Carbide Knife-shaped anvils 0.4mm thickness 2 pcs/set φ2 4 φ1.5 φ1.5 Replacement anvils for bench table V S ȭ Measuring Range mm Replacement knife-shaped anvils 0.7mm thickness for BT-10-SET. Standard anvils of BT-10-SET. Carbide Knife-shaped anvils 0.7mm thickness 2 pcs/set BENCH TABLE OPTIONAL ACCESSORIES NEW! φ1.5 NEW! Anvils ȭ For use with electric micrometer or digital indicator Compact and light weight for carrying and saving space Equipped with two retraction levers XYZ stage with fine adjustment Adjustable measuring force N Bench table can also be installed vertically Standard anvils: blade anvil 0.7mm thickness Repeatability: within 1μm T his product is a Measuring Comparison Tool and therefore it will require a gauge that has the same presicion measurement for comparison standard The anvil attachement of this product is in parallel condition when produced in factory. Paralle adjusment by using wrapping device Model LD-SET is required when the anvil angle or the attachement. Also the direction of anvil is able to be adjusted to requested specification when ordered. BENCH TABLE After replacing anvils, parallelism adjustment of anvils is required with dedicated lapping device LD-SET per piece 0.5g 238 最終校 07_ 規範工具.indd 238 CMYK 2017/03/15 15:58

5 NEW! For refurbishment or parallelism adjustment of anvils LAPPING MACHINE For refurbishment or parallelism adjustment of anvils Easy operation with built-in motor INCLUDED IN SET Lapping device Power: AC100V Lapping stone LD-LB30 Lapping liquid #4-8 LD-LL48 NEW! REPLACEMENT LAPPING STONE LD-SET 2.4kg LAPPING LIQUID NEW! NEW! V S Replacement lapping stone for Lapping Machine LD-SET Cast iron NEW! LD-LB30 45g Lapping liquid for Lapping Machine LD-SET CONTENT 30mL NEW! #4-8 LD-LL48 30g 239 最終校 07_ 規範工具.indd 239 CMYK 2017/03/15 15:58

6 STAND Precision measuring instrument holder Measuring instruments Dial Gauge P Measuring instruments Test Indicator P206 P GC-150C GC-200C Provides flat surface for dial indicator measurements Base: Granite Main Post: Steel Bracket: Aluminum Granite is abrasion resistant. Unlike cast iron, granite does not rust or deteriorate with time. A B C D E F GC-150C GC-200C Measuring Range Flatness(base) Dial Indicator Mounting hole Dial Indicator Mounting hole GC-150C kg GC-200C φ kg STEEL STAND Precision measuring instrument holder Measuring instruments Dial Gauge P φ Measuring instruments Test Indicator P206 P V S φ Measurement base for mounting dial gauge or test indicator Base: Cast Iron Main Post: Steel Bracket: Aluminum Small stand and convenient in comparison measurement using dial gauge The hardened steel measurement base has grooves to prevent ringing Fine Adjust Vertical Stroke Vertical Stroke Base Dimentions Base Flatness Stem Mounting Hole SC-80C φ kg 240

7 Granite does not rust or deteriorate with time Measurement of flatness, parallelism and squareness For tooling set up, precision inspection etc. Granite Granite is abrasion resistant and unlike cast iron, granite does not rust or deteriorate with time Equivalent to JIS Grade 0 G6060 Plate protection Granite Surface Plate Cover (Granite surface plate) P243 (Granite surface plate) For cleaning the surface of granite plate Granite Plate Spray Cleaner P246 Cleans and lubricates surface of granite plate Granite Plate Cleaning Paste P246 W D H G Flatness (μ m) G kg G kg G kg G kg G kg G kg G kg G kg G kg G kg G kg G kg 5kg STEEL STAND Anti-tip auxiliary plate for granite surface plate Anchoring Plate P243 GT-5075J + G5075 GT-75100J Steel stand for SK granite surface plate Angle steel Heavy duty bolted steel construction Leveling bolts for horizontal adjustment Gray painted frame Please prepare spanner (24mm, 27mm)for assembly A B C D E F GT-5050J Approx. 800~ GT-4560J Approx. 800~ GT-5075J Approx. 800~ GT-6060J Approx. 800~ GT-75100J Approx. 800~ GT-10100J Approx. 800~ GT-10150J Approx. 800~ V S Applicable Surface Plate Size GT-5050J kg GT-4560J kg GT-5075J kg GT-6060J kg GT-75100J kg GT-10100J kg GT-10150J kg 241

8 STAND WITH CASTER Anti-tip auxiliary plate for granite surface plate Anchoring Plate P243 GTW-5075J G5075 GTW-5075J ① ② ③ V S Designed to fit SK granite surface plate Angle steel Welded steel stand provides strength and durability Casters for eazy movement Leveling bolts for horizontal adjustment Side stop arms DIMENSIONS A ① GTW-5050J Approx ① GTW-4560J Approx ① GTW-6060J Approx ① GTW-5075J Approx ② GTW-75100J Approx ② GTW-10100J Approx ③ GTW-10150J Approx ③ GTW-10200J Approx Surface Plate Size mm B C D E F GTW-5050J kg GTW-4560J kg GTW-6060J kg GTW-5075J kg GTW-75100J kg GTW-10100J kg GTW-10150J kg GTW-10200J kg 242 最終校 07_ 規範工具.indd 242 CMYK 2017/03/15 15:59

9 Steel stand for SK granite surface plate Granite Surface Plate Steel Stand Secure granite surface plate to floor P ȭ GPL-13 COVER ȭ Anti-tip auxiliary plate for granite surface plate Standard steel plate 4 pcs Applicable steel stand model: GT-4560J, GT-5050J, GT-5075J, GT-6060J, GT-75100J, GT-10100J, GT-10150J, GTW-4560J, GTW-5050J, GTW-5075J, GTW-6060J, GTW-75100J, GTW-10100J, GTW-10150J, GTW-10200J ANCHORING NEW! Protect the plate from scratches or dust Precision surface plate T-shape granite surface plate Granite Surface Plate Granite Surface Plate T type P241 P244 Cast Iron Surface Plate Cast Iron Surface Plate P247 CV-G3030 Protected surface plate from scratches or dust while not in use Flexible PVC V S Applicable surface plate NEW! CV-G1520 G1520 NEW! CV-G2020 G2020 NEW! CV-G2525 G2525 NEW! CV-G3030 G3030, G3030T NEW! CV-G3045 G3045, G3045T NEW! CV-G5050 G5050 NEW! CV-G4560 G4560, S4560C NEW! CV-G5075 G5075 NEW! CV-G6060 G6060 NEW! CV-S3030 S3030C NEW! CV-S5050 S5050C 243 最終校 07_ 規範工具.indd 243 CMYK 2017/03/15 15:59

10 T TYPE PDI For cleaning the surface of granite plate Plate protection Granite Surface Plate Cover Granite Plate Spray Cleaner P243 P246 Cleans and lubricates surface of granite plate Granite Plate Cleaning Paste P246 T-shape for easy lifting G3030T Measurement of flatness, parallelism and squareness For tooling set up, precision inspection, etc. Granite Convenient to lift and move Granite is abrasion resistant and unlike cast iron, granite does not rust or deteriorate with time A B C D E G3030T G3045T W D H mm Flatness μm G3030T kg G3045T kg VACUUM CLAMPING BASE NEW! Dial gauge or test indicator can be used on the precision surface plate Measuring instruments Measuring instruments Dial Gauge Test Indicator P P206 P Precision surface plate Granite Surface Plate P241 V S For mounting dial indicator Main body: Aluminum Suction cup: Rubber Suction cup for fixing to non-magnetic surface such as granite surface plate Holding force Approx. 200N Stem holder: φ6, φ8 With dovetail groove 7,*+7(1,1*.12% *$8*( 6+$) *+ +2/( '29(7$,/ &2//(7 :,7+ &2//(7 ȭ :,7+287 &2//(7 ȭ ),1( $'-.12% NEW! &7,21 &83 Base Dimension mm VB-200 φ g 244 最終校 07_ 規範工具.indd 244 CMYK 2017/03/15 15:59

11 MEASURING JIG Plate protection Granite Surface Plate Cover P243 For cleaning the surface of granite plate Granite Plate Spray Cleaner P Cleans and lubricates surface of granite plate Granite Plate Cleaning Paste P I-6 DIMENSIONS A B C D E F G H I J M Example of use Sample can be clamped to surface for inspection Granite Screw holes: Stainless steel Threaded holes in the surface of the plate. High hardness and superior abrasion resistance. Resist water deterioration and corrosion with time I M6 P1.0(D)12mm I M6 P1.0(D)12mm I M6 P1.0(D)12mm L M6 P1.0(D)12mm I M6 P1.0(D)12mm L M6 P1.0(D)12mm I M6 P1.0(D)12mm I M6 P1.0(D)12mm Positional tolerance of screw holes: ± 1mm I I I L I L I I-6 W D H Flatness 5 4kg kg kg kg V For cleaning the surface of granite plate Granite Plate Spray Cleaner Cleans and lubricates surface of granite plate Granite Plate Cleaning Paste P246 P246 GV-75 Tools for precise holding of round parts Granite Granite is abrasion resistant. Unlike cast iron, granite does not rust or deteriorate with time. 2 pcs(matched pair) A B C D E GV ± 1 40 ± 1 Approx. 4 GV ± 1 50 ± 1 Approx. 4 GV ± 1 63 ± 1 Approx. 6 GV ± ± 1 Approx. 8 reference value V S Nominal size GV V groove squareness Squareness of paralles sides GV kg 5μm/100mm GV kg GV kg 430g 245

12 For cleaning the surface of granite plate Granite Plate Spray Cleaner P246 Cleans and lubricates surface of granite plate Granite Plate Cleaning Paste For cleaning the surface of granite plate Granite Plate Spray Cleaner P246 Cleans and lubricates surface of granite plate Granite Plate Cleaning Paste P246 P246 GP-150 GS-750 L W H L H D GP ± 1 20±1 25±1 For parallel unit GS ± ± 1 50±1 GP ± 1 20±1 40±1 For inspecting flatness GS ± ± 1 60±1 Granite GP ± 1 35±1 50±1 of standards Granite is abrasion resistant. Granite Unlike cast iron, granite does not rust or deteriorate with time. Precision surface on four sides 2 pcs(matched pair) Granite is abrasion resistant. Unlike cast iron, granite does not rust or deteriorate with time. Squareness/Parallelism Straightness Parallelism GS kg GS kg GP g GP kg GP kg SPRAY CLEANER Precision surface plate Granite Products CLEANING PASTE Precision surface plate Granite Products P241 P241 V S GSC-300 For cleaning the surface of granite plate INGREDIENT Sodium alkylbenzene sulfonate and others Removes dirt and grease without damaging stone surface ph: Slightly alkaline (approx. 8.5) Estimated usage: 8 squirts per 1 m2 Lubricant GW-300 INGREDIENT n-nonane Aluminum oxide etc. Makes the granite plate shine for improved sliding on surface Reduces wear on the granite surface from gauges during measurement Removes dirt and grease without damaging stone surface ph: Alkaline (approx. 10.2) Estimated usage: 5mL per 1m2 Content GSC mL GSC mL Content GW mL GW mL 246

13 NEW! Plate protection Granite Surface Plate Cover P243 For tooling set up, precision inspection etc. Cast iron Machine finish S5050C W D H Flatness NEW! S3030C kg NEW! S5050C kg NEW! S4560C kg STEEL S Parallels are used to maintain parallelism and straightness as well as machine set-up Indispensable for inspection and layout work or for miscellaneous setup work in grinding, marking, drilling and milling, in addition to protecting machinery from blade damage Machine grade carbon steel Completely heat treated and accurately ground on all faces 2 pcs(matched pair) Parallelism/ Straightness accuracy:5μm Hardness:HV510~590 Dimension P g P g P g P g P g P g P g P g P g P g P kg P kg P kg P kg P kg P kg P kg P kg P kg P kg V S 247

14 V - A type B type For general engineering work or marking work. Tool for precise holding of round parts during measurement and production. SV-100AT For marking work Scribes P A D C SV-125AT H F G H B E SV-50AT SV-100AT A D C A B C D E F G* H* SV-50AT SV-75AT SV-150BT Tool for precise holding of round parts Cast iron Machine finish 2 pcs(matched pair) H F G SV-125AT SV-200AT A D C G H E B B SV-75BT SV-200BT SV-100AT SV-125AT SV-150AT SV-200AT SV-75BT SV-100BT SV-125BT SV-150BT SV-200BT Reference value Type 50 Pair groove height tolerance SV-50AT 300g SV-75AT g SV-100AT kg A Type SV-125AT kg SV-150AT kg SV-200AT kg SV-75BT kg SV-100BT kg SV-125BT B Type kg SV-150BT kg SV-200BT kg V S V -Ground Finish- For marking work Scribes P Tool for precise holding of round parts Cast iron Ground finish 2 pcs(matched pair) Compliant with JIS Grade 2 V groove squareness: 20μm(SVG-50,75) 30μm(SVG-100~200) Squareness of parallel sides: 20μm(SVG-50,75) 30μm(SVG-100~200) Refer to Cast Iron V Block A type (SV-**AT) for dimensions Type SVG g SVG g SVG kg A type SVG kg SVG kg SVG kg 248

15 WITH V GROOVE Allows clamping of workpiece for processing or measurement For marking work Scribes P Allows clamping of workpiece for marking, processing or measurement Cast iron Machine finish with clamp V groove(dovetail)angle: 90 SBV-150T Groove height squareness / parallelism / perpendicularity accuracy specified above is not guaranteed for open side Height SBV-100T kg SBV-125T kg SBV-150T kg SBV-200T kg V WITH MAGNET NEW! (MV-70G) Use as a jig to hold cylindrical workpieces for measuring or marking Cast iron/ Ground finish Right angle/ Parallelism: 0.025mm/100mm The magnet can be turned ON/OFF by lever operation Ground finish MV-80G MV-70G MV-80G MV-120G H W D Magnetic power when used withφ20mm cylindrical workpiece Magnetic Power N NEW! MV-70G kg MV-80G kg MV-100G kg MV-120G kg A B C D E F MV-70G MV-80G MV-100G MV-120G V S 249

16 STEEL SQUARE (AA TYPE) FIRST GRADE(Hardened) Measurement of squareness Machine grade carbon steel Hardness: Over HV450 Corner Dimension/ accuracy accordance to JIS B 7526 ( exceeds JIS) Hardened measuring surface for abrasion resistance All Hardened, first grade squares are supplied with inspection certificate Blade Blade Blade Beam Beam Beam MTO products 400mm or larger 1st grade, hardened Squareness Accuracy AA-F g AA-F g AA-F g AA-F g AA-F g AA-F g AA-F kg AA-F AA-F kg kg AA-F kg AA-F kg AA-F kg AA-F AA-F150 Squareness±(10+ L )μm (L: ) kg AA-F kg AA-F kg SECOND GRADE (Non-hardened) V S Dimension and accuracy accordance to JIS B 7526 ( exceeds JIS) Non-hardened Ground finish Blade Blade Blade Beam Beam Beam AA-S g AA-S g AA-S g AA-S g Squareness Accuracy AA-S g AA-S g AA-S kg AA-S AA-S kg kg AA-S kg AA-S kg AA-S kg AA-S Squareness ±(20+ L )μm (L: ) kg AA-S kg AA-S kg 250

17 STEEL SQUARE(DD TYPE) FIRST GRADE(Hardened) MTO products 400mm or larger 1st grade, hardened Measurement of squareness Corner Machine grade carbon steel (hardened measuring face) Hardness: Over HV450 Dimension/ accuracy accordance to JIS B 7526 ( exceeds JIS) Hardened measuring surface for abrasion resistance All hardened, first grade squares are supplied with inspection certificate Vertical Horizontal Squareness Accuracy DD-F g DD-F g DD-F g DD-F g DD-F DD-F Squareness±(10+ L )μm (L: ) g g DD-F g DD-F g DD-F kg DD-F kg DD-F kg DD-F kg DD-F kg DD-F kg SECOND GRADE (Non-Hardened) Dimensions/accuracy accordance to JIS B 7526 ( exceeds JIS) Non-hardened Ground finish Vertical Horizontal Squareness Accuracy DD-S g DD-S g DD-S g DD-S g DD-S DD-S Squareness±(20+ L )μm (L: ) g g DD-S g DD-S g DD-S kg DD-S kg DD-S kg DD-S kg DD-S kg DD-S kg V S 251

18 PRECISION SQUARE WITH METRIC GRADUATED BLADE (C TYPE) MTO products 400mm or larger Measurement of squareness Machine grade carbon steel Graduated with 1mm division JIS Grade 2 equivalent Blade Blade Blade Base Base Base C Graduation Accuracy Squareness g C g C g C kg C C C Squareness±(20+ L )μm (L: ) kg kg C kg C kg C kg PRECISION SQUARE WITH METRIC GRADUATED BLADE (E TYPE) MTO products 400mm or larger V S Measurement of squareness Machine grade carbon steel Graduated with 1mm division JIS Grade 2 equivalent Vertical E-150 Horizontal E Squareness±(20+ Graduation Accuracy L )μm (L: ) 10 Squareness g E g E g E g E g E kg E kg E kg E kg 252

19 HEAVY DUTY STEEL SQUARE (HDD TYPE) Measurement of squareness Machine grade carbon steel The heavy duty 'DD' type is engineered for ultimate stability Vertical Base HDD-150 Squareness±(10+ Squareness Accuracy HDD g HDD g HDD g HDD g HDD kg HDD kg HDD kg L )μm (L: ) 20 STEEL SQUARE WITH FLUSH MOUNTED BEAM MTO products Measurement of squareness Machine grade carbon steel Available in "right handed" and "left handed" versions Dimension/ accuracy accordance to JIS Grade 2 JIS Grade 1 equivalent (Squareness±(10+ L 20 )μm)is made to order RIGHT HANDED Blade Blade Blade Beam Beam Squareness TRS-R g TRS-R g TRS-R g TRS-R g TRS-R kg TRS-R kg TRS-R kg TRS-R kg TRS-R kg TRS-R kg TRS-R kg TRS-R kg LEFT HANDED Blade RIGHT HANDED Blade Blade LEFT HANDED Beam Squareness±(20+ Beam L )μm (L: ) 10 Squareness TRS-L g TRS-L g TRS-L g TRS-L g TRS-L kg TRS-L kg TRS-L kg TRS-L kg TRS-L kg TRS-L kg TRS-L kg TRS-L kg V S 253

20 T-SQUARE MTO products For general engineering work or marking work Machine grade carbon steel The blade and beam are permanently secured by rivets Blade Blade Blade Beam Beam Beam Straightness TS g TS g TS g TS g TS kg TS Squareness±(20+ L )μm (L: ) TS kg kg TS kg TS kg FLANGE SQUARE MTO products V S Inspection of surfaces with flange, and piping connections Rolled steel for general structure A B C D E F G FS FS FS Straightness FS g FS g FS kg 254

21 I-BEAM TYPE PRECISION Measurement of of flatness, parallelism and straightness Machine grade carbon steel Inspection certificate attached side view MTO products Reference standard for calibration Gauge P80 81 Grade A / Hardened Hardness: HV490 ~ 620 Straightness IBM-A500H Height Straightness(2+ L )μm (L: ) kg IBM-A750H kg IBM-A1000H kg IBM-A1500H kg IBM-A2000H kg IBM-A2500H kg IBM-A3000H kg Grade A / Non-hardened Straightness IBM-A Height Straightness(2+ L )μm (L: ) kg IBM-A kg IBM-A kg IBM-A kg IBM-A kg IBM-A kg IBM-A kg RAIL TYPE PRECISION MTO products Measurement of flatness, parallelism and straightness Machine grade carbon steel Usable for precison machine installation, flatness inspection of surface plate etc. Ground finish Inspection certificate attached side view Reference standard for calibration Gauge P80 81 Straightness(2+ L )μm (L: ) 250 Straightness Height R-A1000H kg R-A1500H kg R-A2000H kg R-A2500H kg R-A3000H kg Straightness(2+ L )μm (L: ) 250 Straightness Height R-A kg R-A kg R-A kg R-A kg R-A kg Straightness(4+ L )μm (L: ) 50 Straightness Height R-B1000H kg R-B1500H kg R-B2000H kg R-B2500H kg R-B3000H kg Straightness(4+ L )μm (L: ) 50 Grade A / Hardened Hardness: HV490 ~ 620 Grade A / Non-hardened Grade B / Hardened Hardness: HV490 ~ 620 Grade B / Non-hardened Straightness Height R-B kg R-B kg R-B kg R-B kg R-B kg V S 255

22 STEEL STANDARD Measurement of flatness, parallelism, straightness Machine grade carbon steel Measuring surface: Ground finish Inspection certificate attached MTO products Reference standard for calibration Gauge side view P80 81 Grade A/ Hardened (Hardness: HV ) ST-A500H Straightness(2+ L )μm (L: ) kg ST-A750H kg ST-A1000H kg ST-A1500H kg ST-A2000H kg ST-A2500H kg ST-A3000H kg Grade A/ Non-hardened ST-A Straightness(2+ L )μm (L: ) kg ST-A kg ST-A kg ST-A kg ST-A kg ST-A kg ST-A kg V S STEEL STANDARD WITH GRADUATIONS Measurement of flatness, parallelism, straightness or use for precision marking Machine grade carbon steel Measuring face: Ground finish A type: Scale interval of 1 mm, graduated on single side (20mm blank space on both edges) B type: 0 point graduated start from left edge A TYPE A TYPE STG-A B TYPE A type: Straightness(10+ MTO products Reference standard for calibration Gauge side view L )μm (L: ) g STG-A kg STG-A kg STG-A kg STG-A kg STG-A kg P80 81 B TYPE STG-B B type: Straightness(10+ L )μm (L: ) g STG-B g STG-B kg STG-B kg STG-B kg STG-B kg 256

23 STANDARD TYPE Measurement of flatness and straightness or use for precision marking Carbon tool steel for machine use Measuring face Ground finish All hardened and non-hardened size larger than 750mm straight edged are supplied with inspection report Grade A /Hardened Hardness: HV490 ~ 620 Grade A: Straightness(10+ L Grade A / Non-hardened Grade A: Straightness(10+ L S-A Grade B: Straightness(20+ L 50 )μ m 25 )μ m L: S-A150H S-A200H g 110g S-A250H g S-A300H g S-A450H S-A500H g 800g S-A600H g S-A750H S-A1000H kg 2.6kg S-A1500H kg S-A2000H kg S-A2500H S-A3000H kg 24kg L )μ m Grade B: Straightness( )μ m L: 80g S-A g S-A g S-A g S-A S-A g 800g S-A g S-A S-A kg 2.6kg S-A kg S-A kg S-A S-A kg 24kg side view MTO products Reference standard for calibration Gauge P80 81 BEVELED TYPE MTO products Measurement of flatness and straightness or use for precision marking Machine grade carbon steel Measuring face Ground finish All hardened and non-hardened size larger than 750mm straight edged are supplied with inspection report Grade A /Hardened Hardness: HV490 ~ 620 Grade A: Straightness(10+ L 50 )μ m B-A150H B-A Taper L: Blade 80g B-A g B-A g B-A g B-A B-A g 700g B-A g B-A B-A kg 2.3kg B-A kg B-A kg B-A kg B-A kg Grade B: Straightness(20+ Taper L 25 )μ m Blade L: 80g B-A200H g B-A250H g B-A300H g B-A450H g B-A500H g B-A600H g B-A750H kg B-A1000H kg B-A1500H kg B-A2000H kg B-A2500H kg B-A3000H kg Grade A / Non-hardened Grade A: Straightness(10+ L L )μ m 50 Grade B: Straightness( )μ m side view Reference standard for calibration Gauge P80 81 V S 257

24 HARDENED CLAMP PC-100 For holding or clamping work together Carbon steel for machine use Hardness:HV390~450 These parallel clamps are designed to maximize clamping leverage 2 pieces body and screws are hardened 2 pcs/set A B(Max) C Thread size PC g M5 P PC g PC g M6 P PC g PC M7 P g PC M8 P kg PC M10 P1.5 2kg PC W1/ kg PC M16 P2.0 9kg V S PC M20 P2.5 15kg SPARE PARTS(FULL THREAD) Product Name mm mm mm mm Full thread 100mm for parallel clamps 125mm mm mm mm mm SPARE PARTS(HALF THREAD) Product Name mm mm mm mm Full thread 100mm for parallel clamps 125mm mm mm mm mm 258