Discipline Mechanical Calibration Issue Date Certificate Number C-0752 Valid Until Last Amended on - Page 1 of 6
|
|
- Lynne Curtis
- 5 years ago
- Views:
Transcription
1 Last Amended on - Page 1 of 6 I DIMENSION 1. Caliper $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 0 to 1000 mm 12.2 µm 13.3 µm Using Caliper Checker, Slip Gauge Block & 2. Depth Caliper $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 12.2 µm Using Caliper Checker, Slip Gauge Blocks & 3. Height Gauge $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 0 to 1000 mm 13.7 µm 14.8 µm Using Caliper Checker by 4. Electronic Height Gauge # (1D/2D) LC: mm 0 to 300 mm 0 to 600 mm 2.8 µm 4.4 µm Using Slip Gauge Block & 5. External Micrometer $ LC : mm 0 to 200 mm 200 mm to 300 mm 300 mm to 600 mm 2.0 µm 2.4 µm 3.4 µm Using Slip Gauge Blocks & 6. Depth Micrometer $ LC : 0.001mm 0 to 300 mm 5.5 µm Using Slip Gauge Blocks &
2 Last Amended on - Page 2 of 6 7. Internal Micrometer $ (Analog/ Digital) LC: 0.001mm 0 to 200 mm 200 mm to 1500 mm 2.0 µm 5.8 µm Using Slip Gauge Block, Long Using Gauge Blocks, Slip Gauge Accessories by 8. Plunger Dial Gauge $ LC : mm 0 to 100 mm 2.1 µm Using Universal Length Measuring Machine by 9. Lever Dial Gauge $ LC : 0.001mm 0 to 3 mm 2.1 µm Using Universal Length Measuring Machine by 10. Bore Dial Gauge $ (Transmission error) Upto 2 mm 2.1 µm Using Universal Length Measuring Machine by 11. Groove Dial Gauge $ (Internal / External) LC : 0.01 mm 0 to 100 mm 5.9 µm Using Slip Gauge Blocks & Slip Gauge Accessories by 12. Dial Thickness Gauge $ LC: 0.001mm 0 to 50 mm 2.4 µm Universal Length Measuring Machine by Comparison Method
3 Last Amended on - Page 3 of Pistol Caliper $ LC : 0.1 mm 0 to 100 mm 58 µm Using Slip Gauge Blocks by 14. Snap Gauge / Gap Gauge $ 2.5 mm to 100 mm 200 mm to 300 mm 300 mm to 600 mm 15. Plain Plug Gauge $ Upto 50 mm 200 mm to 300 mm 1.2 µm 1.9 µm 2.2 µm 7.0 µm 1.4 µm 1.6 µm 2.8 µm Using Slip Gauge Blocks, Long Gauge Blocks & Linear Height Gauge by Using Electronic Micro Indicator, Slip Gauge Blocks & 16. Cylindrical Measuring Pin $ Thread Measuring Wires Upto 50 mm 1.5 µm Using Electronic Micro 17. Cylindrical Setting Master $ Upto 50 mm 1.5 µm 1.6 µm 2.7 µm Using Electronic Micro Indicator, Slip Gauge Blocks & 18. Feeler Gauge $ Upto 1 mm 1.3 µm Using Electronic Micro 19. Limit Gauges $ (Flush Pin Gauge / Depth Gauge / Width Gauge/ Center Distance Gauge/ Height Setting Master ) Upto 100 mm 100 mm to 300 mm 300 mm to 500 mm 3.7 µm 3.9 µm 7.0 µm Using Electronic Micro Indicator, Slip Gauge Blocks, Long Gauge Blocks & Linear Height Gauge by 20. Thread Plug Gauge $ 3 mm to 100 mm 4.4 µm Using Floating Carriage Diameter Measuring Machine by
4 Last Amended on - Page 4 of 6 3 mm to 100 mm 4.4 µm Using Floating Carriage 21. Taper Thread Plug Gauge $ Diameter Measuring Machine by 22. Coating Thickness Gauge $ 0 to 3 mm 2.5 µm Using Standard Foils by 23. Standard Foils $ Upto 2 mm 1.7 µm Using Electronic Micro Comparison Method 24. Dial Calibration Tester $ LC : mm Upto 25 mm 1.4 µm Electronic Micro 25. Plain Ring Gauge $ Upto to 50 mm 5.0 µm Using Universal Length Measuring Machine & Master Ring Gauge by 26. Thread Ring Gauge $ 4 mm to 50 mm 5.0 µm Using Universal Length Measuring Machine & Master Ring Gauge by 27. Micrometer Head $ LC : mm 0 to 25 mm 1.4 µm Using Electronic Micro 28. Caliper Checker $ 0 to 600 mm 7.1 µm Using Slip Gauge Blocks, Long Gauge Blocks & Linear Height Gauge by Upto 600 mm 7.1 µm Using Slip Gauge Blocks, 29. Micrometer Setting Master $ Long Gauge Blocks & Linear Height Gauge by
5 Last Amended on - Page 5 of V Block $ (Flatness, Parallelism, Symmetricity) 31. Parallel Block $ (Parallelism) 32. Comparator Stand $ (Flatness) 33. Engineer s Square $ (Parallelism, Perpendicularity) 34. Angle Plate $ (Squareness) Upto 300 mm 6.7 µm Using Plain Mandrel and Dial Upto 300 mm 6.7 µm Using Linear Height Gauge by 300 x 300 mm 2.9 µm Using Electronic Micro Upto 600 mm 6.9 µm Using Linear Height Gauge by Upto 600 mm 6.8 µm Using Linear Height Gauge by 35. Electronic Micro $ Indicator /Electronic Probe LC : mm 0 to 25 mm 1.5 µm Using Slip Gauge Blocks by 36. Bevel Protractor $ Combination Set LC : 5 min Upto minutes of arc Using Sine Bar, Slip Gauge Blocks by 37. Surface Plate 3000 mm x 3000 mm (Sensitivity:0.02 mm/m) 38. Bench Center (Co axiality of Centers) II. ACCOUSTICS 2x L W m 100 (L&W in mm) Using Sprit Level by Upto 300 mm 5.9 µm Using Mandrel & Dial 1. Sound Level Meter $ 94 db & 114 db 1.32 db Using Sound Level Calibrator
6 Last Amended on - Page 6 of 6 III. MASS 1. Weighing Balance (Readability: 10 mg) (Readability: 1 g) (Readability: 1 g) 0 to 600 g 0 to 10 kg 0 to 30 kg 0.21 g 3 g 13 g Using F1 accuracy class Standard Weights based on OIML R 76-1 IV. PRESSURE & VACUUM 1. Hydraulic Pressure (i) Digital / Dial Pressure Gauges 2. Pneumatic Pressure 0 to 700 bar 0.5 bar Using Digital Pressure Gauge & hydraulic comparator pump. by (i) Digital / Dial Gauges 0 to 20 bar bar Using Digital Pressure Gauge & pressure / vacuum pump. by (ii) V. RPM Digital / Dial Vacuum Gauges 1. Tachometer $ (Non-contact type only) -0.9 bar to 0 bar bar Using Digital Vacuum Gauge by. 240 rpm to 1000 rpm 1000 rpm to 6000 rpm 6000 rpm to rpm rpm to rpm 0.34 % to 0.14 % 0.14 % to 0.2 % 0.2 % to 0.11 % 0.11 % Using Optical Tachometer Calibration with Transmille MPC 240 rpm to rpm 1.4 rpm to 22 rpm Using Digital non-contact 2. RPM measurement / Centrifuge # Tachometer based on tachometer * Measurement Capability is expressed as an uncertainty ( ) at a confidence probability of 95% $ Only in Permanent Laboratory. Only for Site Calibration # The laboratory is also capable for site calibration however, the uncertainty at site depends on the prevailing actual environmental conditions and master equipment used.
Q-Tech Engineering Services, S-134, C/o, Precision Engineering Works, MIDC, Bhosari, Pune, Maharashtra
Last Amended on 24.05.2015 Page 1 of 5 I. DIMENSION 1. EXTERNAL MICROMETER $ L.C. 1 µm Φ >100 mm to 300 mm 1.4 µm 3.0 µm Using Slip Gauge Blocks Gr '0' / Long Slip Gauges, by Comparison 2. DEPTH MICROMETER
More informationAlcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
More informationCal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm
More informationAccurate Labs, 311, 312 Govinda Complex, GIDC Char Rasta, Vapi, Valsad, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 9 I. DIMENSION 1. CALIPER $ Vernier L.C. 0.01mm 7.5 µm 9.0 µm Using Caliper Checker & Slip Gauges L.C. 0.05mm 29.5 µm 30.0 µm Dial / Electronic L.C. 0.02mm 12.5 µm 13.5 µm 2.
More informationCaliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 10 I. DIMENSION (Basic Measuring, Gauge etc.) 1. PLAIN PLUG / WIDTH/ DEPTH/ Upto 100 mm 1.9 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ 100 mm to 300 mm 3.8
More informationCalitron Calibration Laboratory, U1: 207, Kohinoor Arcade, Tilak Chowk, Nigdi, Pune, Maharashtra
Last Amended on 12.09.2014 Page 1 of 7 I. MASS 1. Weights $ (Conventional Mass) 1 mg 0.015 mg Using Weights of 2 mg 0.015 mg accuracy Class F1 and 5 mg 0.015 mg 10 mg 0.015 mg 20 mg 0.020 mg 50 mg 0.020
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0393 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. DIMENSION 1. Vernier Caliper (Digital/ Dial/ Scale) $ L.C.: 0.01 mm 0 to 150 mm 7.7 µm Using Caliper Checker 0 to 200 mm 8.1 µm 0 to 300 mm 9.3 µm 0 to 600 mm 13.9 µm 2.
More informationQA Tech (A Division of GMP Technical Solutions Pvt. Ltd.), L-73, Verna Industrial Estate, Verna Salcette, Goa
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10µm Φ 0 to 300 mm 13 µm Using Caliper Checker; & T.C. Gauge Block Set by Comparison L.C. :- 20µm 0 to 1000 mm 22 µm Using Caliper Checker;
More informationAccurate Measurements, Plot No.103, D Block, Meethapur Ext., Badarpur, New Delhi. Discipline Mechanical Calibration Issue Date
Last Amended on 11.11.2014 Page 1 of 6 I. DIMENSION 1. Dial/ Digital Vernier Caliper $ L.C.: 0.01mm Φ 0 to 200 mm 7.5 µm Using Slip Gauge Set & L.C.: 0.01mm Φ 0 to 300 mm 12.17 µm Using Slip Gauges & Caliper
More informationCentral Mechanical Engineering Research Institute, Mahatma Gandhi Avenue, Durgapur, West Bengal
Last Amended on 23.09.2014 Page 1 of 9 I. DIMENSION 1. GAUGE BLOCKS $ 0.5 mm to 25 mm 25 mm to 50 mm 50 mm to 75 mm 75 mm to 100 mm 2. LENGTH BAR $ Upto 300 mm 300 mm to 600 mm 300 mm to 1000 mm 0.11µm
More informationA.A. Calibration Pvt. Ltd., 13-C/18, Vasundhara Haat, Vasundhara, Ghaziabad, Uttar Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1. VERNIER CALIPER $ L.C. 0.01mm 0 to 300 mm 0 to 600 mm 0 to 1000 mm 8 µm 14 µm 16 µm, Slip Gauge Accessories, Gauge Block L.C. 0.02 mm 0 to 1500 mm
More informationICL Calibration And Testing Services, SCO - 37, Ground Floor, Sector-12, Panchkula, Haryana. Discipline Mechanical Calibration Issue Date
Last Amended on 09.12.2016 Page 1 of 8 I. DIMENSION (Basic Measuring, Gauge etc.) 1 LENGTH GAUGE/SETTING ROD $ Up to 100 mm >100 mm to 500 mm 1.5 µm 7.20 µm Using ULM, Gauge Block grade- 0 & Electronic
More informationAutocal Solutions Pvt. Ltd., Plot No. BG-74, Gala No. 1 & 2, Jai Tulja Bhavani Indl. Premises, Telco Road, MIDC Bhosari, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER (Vernier/Dial/Digital) L. C. : 10µm Φ 0 to 600 mm 16 µm Using Caliper Checker & External Micrometer by 2. DEPTH GAUGE (Vernier/Dial/ Digital) L. C.
More informationInstitute for Design of Electrical Measuring Instruments, Swatantryaveer Tatya Tope Marg, Chunabhatti, Sion, Mumbai, Maharashtra
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1 Calipers $ Up to 600 mm 10.4 µm Using Caliper Checker by Up to 1000 mm 13.2 µm Using Long Slip Gauge by 2 Height Gauges $ Up to 600 mm 12.8 µm Using
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0751 Valid Until Last Amended on
Last Amended on 10.03.2016 Page 1 of 5 I. DIMENSION 1. Vernier caliper $ 0 to 300 mm/0.01 mm ± 12.0 µm Using Caliper Checker 0 to 300 mm/0.02 mm ± 16.1 µm Using Caliper Checker 0 to 600 mm/0.01 mm ± 14.0
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0208 Valid Until Last Amended on
Last Amended on 12.08.2016 Page 1 of 7 I. DIMENSION (Basic Measuring, Gauge etc.) 1. CALIPER $ (Vernier / Dial / Digital) L.C.: 10 µm ф L.C.: 50 µm ф Upto 600mm 13 m Using Gauge Block Set Grade 0 (Carbide);
More informationHi-Tech Calibration, 307, 3rd Floor, Govinda Complex, Char Rasta, Vapi, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on 18.01.2016 Page 1 of 7 I. DIMENSIONS 1. CALIPER $ (Vernier, Dial, Electronics) L.C.0.01 mm up to 1000mm 24 µm Using Caliper Checker / L.C.0.02 mm up to 600mm 19 µm Length Bars /Slip Gauges
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that SP Metrology System Thailand Co., LTD 88/115
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service ccredited to Division of Cromwell Tools Ltd Services Block 65 Chartwell Drive Wigston Leicester LE18 2FS Contact: Mr T still Tel: +44 (0)116-2572396
More informationPage : 1 of 16. FIELD OF TESTING : Calibration and Measurement CALIBRATION & MEASUREMENT CAPABILITY EXPRESSED AS AN UNCERTAINITY *
Metrix Precision Pte Ltd Certificate No. : LA-2014-0581-C No. 23 Tagore Lane #02-03/04 Tagore 23 Warehouse Issue No. : 2 Singapore 787601 Date : 29 July 2016 FIELD OF TESTING : Calibration and Measurement
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Laboratory locations: Unit 9 G B Quality ssurance (Consultants)
More informationMetrology Laboratory, CMTI, Central Manufacturing Technology Institute, Tumkur Road, Bangalore, Karnataka Accreditation Standard ISO/IEC 17025: 2005
aboratory Metrology aboratory, CMTI, Central Manufacturing Technology ast Amended on 22.09.2016 Page 1 of 15 I. DIMENSION (Basic Measuring, Gauge etc.,) 1. ANGE GAUGE BOCKS $ 0 to 90 2.8 arc sec Using
More informationSchedule. 200 C to 400 C. 400 C to 660 C C to 800 C C to 1300 C C to 1200 C. 0 C to 1700 C. 0 C to 1700 C.
Page: 1 of 9 LABORATORY LOCATION: (PERMANENT LABORATORY) PPCALIBRATION SERVICES SDN. BHD. NO. 15, MEDAN BUKIT EMAS PUSAT PERNIAGAAN BUKIT EMAS 14000 BUKIT MERTAJAM, PULAU PINANG MALAYSIA This laboratory
More informationShriram Institute For Industrial Research, 14-15, Sadarmangala Industrial Area, Whitefield Road, Bangalore, Karnataka
Certificate Number CC-2083 (in lieu of C-0216, C-0304, C-1497) Page 1 of 7 ELECTRO-TECHNICAL CALIBRATION I. MEASURE 1. Time $ 5 sec to 9900 sec 0.12 sec to 5.8 sec Using Digital Time Totalizer (Digital
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service Issue No: 028 Issue date: 10 pril 2018 ccredited to 6 Banner Park Wickmans Drive Coventry CV4 9X Contact: Keith rnold Tel: +44 (0)2476 426 316/317
More informationRev /07/2015 CATALOGUE - CALIBRATION SERVICES 1
Rev. 02 07/07/2015 CATALOGUE - CALIBRATION SERVICES 1 OVER 100 ITEMS We are proud to present to you our new catalogue for 2015. In the following pages we present more than 100 instrument types, which we
More informationPrice List. Calibration Fee
3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel. +66 577 5100 (Please contact : Customer Service Section Ext. 3101, 310) Fax. +66 577 3659 E-mail : cs@nimt.or.th Website : http://www.nimt.or.th
More informationGear Measurement. Lecture (7) Mechanical Measurements
18 3. Gear profile checking 2. Involute measuring machine In this method the gear is held on a mandrel and circular disc of same diameter as the base circle of gear for the measurement is fixed on the
More informationHeight Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationWelcome to Garber C O R P O R AT E O V E R V I E W
CORPORATE OVERVIEW Garber Metrology is one of the only companies in the Mid-Atlantic Region that combines full service weighing solutions, a wide range of calibration /metrology services and a broad scope
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RIVERVIEW CALIBRATION SERVICES, LTD 5706 Veto Road Belpre, OH 45714 J. Michael Pennell Phone: 740 678 8625 CALIBRATION Valid To: July
More informationSchedule. 300 mm to 600 mm 600 mm to 1000 mm inch to 12 inch
LABORATORY LOCATION: (PERMANENT LABORATORY) MITUTOYO (M) SDN. BHD. MAH SING INTEGRATED INDUSTRIAL PARK BANDAR PINGGIRAN SUBANG 4, JALAN UTARID U5/14, SECTION U5 40150 SHAH ALAM SELANGOR, MALAYSIA Page:
More informationStandard Scales SERIES 182 Made of Low-Expansion Glass. Working Standard Scales SERIES 182 E-32
Standard Scales SERIES 182 Made of Low-Expansion Glass High-precision glass scales manufactured under Mitutoyo s leading-edge Linear Scale production technology. High accuracy is guaranteed to be used
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, hertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IE 17025:2005 Unit 3 24-26 Boulton Road Stevenage Hertfordshire SG1 4QX ontact: Mr G J Wilson Tel: +44 (0) 1438 900080 Fax: +44 (0) 1438
More informationTRI-STATE INSTRUMENT SVC, INC
CALIBRATION RATE POLICY AND PRICING 2017 Typically, compliance with ISO-900x and TS 16949 specifications require LONG FORM calibration reports in the following formats. Format #1 -- Before Adjustment or
More information+91-8048600379 Rampura Tools http://www.rampuratools.in/ We are one of the leading distributor, suppliers and traders of Measuring Instrument. Owing to their accurate measurement, sturdy construction,
More informationCALIBRATION SYSTEM CERTIFICATE
CALIBRATION SYSTEM CERTIFICATE With respect to products (measuring instruments and testing instruments), we hereby certify that we have established our calibration system traceable to the national (international)
More informationSCOPE OF ACCREDITATION TO ISO/IEC & KS Q ISO/IEC
SCOPE OF ACCREDITATION TO ISO/IEC 17025-2005 & KS Q ISO/IEC 17025-2006 Korea Instrument Co., Ltd. Branch 45, Gwangjang-ro 56beon-gil, Sasang-gu, Busan 46976 Phone : 051-322-0880, Fax : 051-322-4066, E-mail
More informationPROMPT ENGINEERING P.O. BOX BARWA VILLAGE, WAKRA, BUILDING NO. 6 SHOP NO. 19 AND 20 DOHA QATAR
This is to attest that PROMPT ENGINEERING P.O. BOX 24067 BARWA VILLAGE, WAKRA, BUILDING NO. 6 SHOP NO. 19 AND 20 DOHA QATAR Calibration Laboratory CL-165 has met the requirements of AC204, IAS Accreditation
More informationTEST AND CALIBRATION SERVICES Ensuring quality and reliability.
> TEST AND CALIBRATION SERVICES Ensuring quality and reliability www.thalesgroup.com.au TEST AND CALIBRATION SERVICES ENSURING QUALITY AND RELIABILITY Introduction Thales Australia s Test and Calibration
More informationScope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX Gavin Lewis
Scope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX 77060 Gavin Lewis 832-428-2737 In recognition of a successful assessment to ISO/IEC 17025:2005
More informationMeasuring. Affordable. Effective. Instruments
Measuring Effective Affordable Instruments 2 Electronic Calipers 00534002 00534003 00534020 n Stainless steel frame n Thumb wheel for rapid setting n Direct Metric/Inch conversion n Accuracy to 0,02 mm
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Garber Metrology Weighing Solutions & Precision
More informationROUGHSCAN SURFACE ROUGHNESS TESTER OPERATIONAL MANUAL
SURFACE ROUGHNESS TESTER OPERATIONAL MANUAL Bms Bulut Makina Sanayi Ve Ticaret Ltd. Şti. İkitelli Organize Sanayi Bölgesi Dolapdere Sanayi Sitesi Ada 4 No : 7-9 İkitelli / İSTANBUL-TÜRKİYE Phone : +90
More informationLIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
More informationDial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Chamber Commerce: 06073326 Location(s) where activities are performed under accreditation ad Office Smaragdstraat 7 7554 TD ngelo OV The Netherlands Location Abbreviation/ location Smaragdstraat 7 7554
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Torreón, Coahuila, México C.P. 27019 (Hereinafter
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationGauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
More informationDepartment of Mechanical Engineering ME6513 - METROLOGY AND MEASUREMENT LAB LABORATORY MANUAL Name Register No. Branch Year & Semester : : : : 1 CONTENTS S.NO. DATE EXPERIMENT NAME PAGE NO. 1 Calibration
More informationIEC SYSTEM FOR CONFORMITY TESTING AND COMMITTEE OF TESTING LABORATORIES CERTIFICATION OF ELECTRICAL EQUIPMENT
IEC SYSTEM FO CONFOMITY TESTING AND CETIFICATION OF ELECTICAL EQUIPMENT COMMITTEE OF TESTING LABOATOIES =equired by Lab S=May be subcontracted TESTING AND MEASUING EQUIPMENT/ALLOWED SUBCONTACTING Power
More information最終校 NEW! STANDARD TOOL RUN-OUT GAUGE SYSTEM. Made in Japan. Concentricity measurement by mounting your current indicator to this system.
236p 236p 236p 238p 238p 239p 239p 239p 240p 240p 240p 241p 241p 241p 242p 242p 243p 243p 244p 244p 245p 245p 246p 246p 246p 246p 247p 247p 248p 248p 248p 248p 249p 249p 250p 251p 252p 252p 253p V S 253p
More informationCALIBRATION PRICE LIST
THREADED API STANDOFF SIZE SPEC 5 LINE PIPE $95 ea $150 ea 1/8 4 working 5 12 working $180 ea $290 ea $190 set 1/8 12 masters TUBING (UPTBG & TBG) (EUE & NUE) (1.0500 4 ½ ) $125 ea $190 set Working Masters
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALDINGER COMPANY 1440 Prudential Drive Dallas, TX 75235 Timothy R. Detten Phone: 214 638 1808 CALIBRATION Valid To: July 31, 2018 Certificate
More informationSAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
More informationSTANDARD RETOOLABLE GAUGES. Countersink Depth. ID Measuring. Measuring. Wired with integral cycle button. Wireless
STANDARD RETOOLABLE GAUGES ID Measuring Countersink Depth Measuring Wireless Wired with integral cycle button ID Measuring All retoolable by replacing the nosepiece All retoolable by replacing the either
More informationuser leaflet ANALOGUE BLOCK GAUGE
user leaflet ANALOGUE BLOCK GAUGE 1.0 Index Section Title Page 1.0 Index....................... 2 2.0 Safety Summary............... 3 3.0 Introduction.................. 4 4.0 Components of the Block Gauge...
More informationLecture (7) on. Gear Measurement. By Dr. Emad M. Saad. Industrial Engineering Dept. Faculty of Engineering. Fayoum University.
1 Lecture (7) on Gear Measurement Fayoum University By Dr. Emad M. Saad Industrial Engineering Dept. Faculty of Engineering Fayoum University Faculty of Engineering Industrial Engineering Dept. 2015-2016
More information0268 Gear tooth calipers
0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Marine and Outdoor Power Equipment Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours
More informationCalibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 5
National Research Council Conseil national de recherches Canada Canada Measurement Standards and Science Science des mesures et étalons Calibration Laboratory Assessment Service CLAS Certificate Number
More informationCOMPAC Dial Test Indicators
DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface
More informationOutput Shaft Assembly COMPONENTS
MT140 Component Parts (Output Shaft Assembly Output Shaft Assembly COMPONENTS DISASSEMBLY OF OUTPUT SHAFT ASSEMBLY 1. REMOVE SLEEVE FROM OUTPUT SHAFT Using SST, remove the sleeve from the output shaft.
More informationBLOCK GAUGE. user manual
BLOCK GAUGE user manual 1.0 Index Section Title Page 1.0 Index....................... 1 2.0 Safety Summary............... 2 3.0 Introduction.................. 3 4.0 Components of the Block Gauge... 4 5.0
More informationFaculty of Mechanical Engineering B.E. Mechanical Engineering (Sandwich) (R 2013) Semester III. Requirements for a batch of 30 students
Sl. No. Faculty of Mechanical Engineering (R 203) Semester III CE635 STRENGTH OF MATERIALS LABORATORY (R) (A) Deficiency (R - A). Universal Tensile Testing machine with double shear attachment 40 Ton Capacity
More informationCheck Points. for Measuring Instruments
Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement, there are many kinds of measuring instruments and their corresponding measuring
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationTECHNICAL INFORMATION
Radial Roller Bearings Fitting and Mounting Fixed Bearings and Float Bearings Radial and axial loads in bearing units can be transmitted by fixed and floating bearings A fixed bearing is generally used
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORYACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements.
+ Millimess. Digital Comparators 6- Inductive Digital Comparator µmaxµm ABS System 0 TOL RS232C Digimatic The most valueable electronic indicator for high production measurements. Inch/Metric operator
More informationLever Type Dial Indicators Dial Test Indicators
Lever Type Indicators Test Indicators Small Tool Instruments and Data Management Catalog No.E12035 Drastically Enhanced Durability, Sensitivity and Visibility Lever Type Indicator Test Indicator Crystal
More informationtesting and measuring instruments for vehicle wheels
testing and measuring instruments for vehicle wheels en testing and measuring instruments for vehicle wheels For more than 20 years MAKRA has been manufacturing measuring and testing equipment for the
More informationPage 1 of 5. United Testing Systems, Inc S. Acacia Avenue Fullerton, CA William Warner, Quality Manager
IAS Accreditation Number Accredited Entity Address CL-128 1375 S. Acacia Avenue Fullerton, CA 92831 William Warner, Quality Manager Contact Name Telephone +1 (714) 638-2322 Effective Date of Scope July
More informationStrip Width Gauge Operating and Service Instructions
Strip Width Gauge VABM 4-00 Operating and Service Instructions erstellt am 25.2.2002 freigegeben am Bemerkungen Rev.01 Seiten: Name: Rietdorf Name: Name: measuring - controlling - recording - automation
More informationLever Type Dial Indicators Dial Test Indicators
Lever Type Indicators Test Indicators Small Tool Instruments and Data Management Catalog No.E12035(2) Drastically Enhanced Durability, Sensitivity and Visibility Lever Type Indicator Test Indicator Crystal
More informationMeasurement & Calibration
Measurement & Calibration MIC TRAC 4000 In-House Precision Gage Calibration System Inspect Parts, Calibrate, and Track Gages Step 1: Find what type of gages you have. Gages & Indicators for Calibration
More informationLinear Bushings and Shafts Inch Series
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Linear Bushings and s Inch Series The Drive and Control Company
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationStraightness, Angle and Inclination Measurement
Straightness, Angle and Inclination Measurement Straightness, Angle and Inclination Measurement H-1 Straightness, Angle and Inclination Measurement Levels with Natural Measuring Base Mechanical instruments
More informationTESA Clearance Sale TESA CAL IP67 DIGITAL CALIPERS (METRIC ONLY) DIGITAL LIGHT CALIPERS DIGITAL DEPTH LIGHT CALIPERS ETALON DIAL CALIPERS
CLEARANCE SALE TESA Sale Validité: 31.10.2016 ou épuisement des stocks Gültig bis 31.10.2016 oder solange der Vorrat reicht Validity: 31.10.2016 or while stock lasts TESA CAL IP67 DIGITAL CALIPERS (METRIC
More information+91-8048718949 Bearing & Tools Centre http://www.measuringtestinginstrument.com/ We are a renowned dealer and supplier of a wide assortment of precision engineered testing and measuring equipment. Our
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: Monterrey, Nuevo León, 64920 (Hereinafter called the
More informationHellenic Accreditation System. Annex F2/17 to the Certificate No SCOPE of ACCREDITATION
Hellenic Accreditation System Annex F2/17 to the Certificate No. 263-5 SCOPE of ACCREDITATION of the Testing & Calibration Laboratory of LINK LAB LTD for the performance of calibrations Measurand / Spectrophotometric
More informationOVERHAUL. 1. INSPECT 1ST GEAR THRUST CLEARANCE (a) Using a feeler gauge, measure the 1st gear thrust clearance.
4168 OVERHAUL 410F701 1. INSPECT 1ST GEAR THRUST CLEARANCE (a) Using a feeler gauge, measure the 1st gear thrust clearance. 0.10 to 0.40 mm (0.0039 to 0.0157 in.) 0.40 mm (0.0157 in.) C80538 2. INSPECT
More informationDial and Electronic. Indicators Gauges
Dial and Electronic Indicators Gauges 37 AGD Group 2 2900 Electronic Indicators Innovative, Full Featured & Tough 2900 Electronic Indicators are available in a choice of configurations to meet a range
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017. Data Weighing Systems 255 Mittel Drive Wood Dale, IL Steven A. Thomas CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 Data Weighing Systems 255 Mittel Drive Wood Dale, IL 60191 Steven A. Thomas 800-397-6301 CALIBRATION Valid to: September 22, 2019 Certificate Number: L1114-1
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
More informationVBK 2596/12E/RSF. Thickness and Width Gauge for Strip and Profile. Operating- & Service Instructions. (with lateral guide rollers)
Thickness and Width Gauge for Strip and Profile (with lateral guide rollers) VBK 2596/12E/RSF Operating- & Service Instructions erstellt am 5.2.1998 freigegeben am Bemerkungen Rev.01 Seiten:16 Name: Rietdorf
More informationSTRENGTH Enclosed head design seals out contaminants for improved performance and life.
T H E P E R F O R M A Enclosed head design seals out contaminants for improved performance and life. Torque wrap design reduces stress on gear and pawl teeth. Innovative linear ball bearing system eliminates
More informationFeatures of the Ball Screw
Features of the Driving Torque One Third of the Sliding Screw With the, balls roll between the screw shaft and the nut to achieve high effi ciency. Its required driving torque is only one third of the
More information1999 F-150/250 Workshop Manual
Page 1 of 30 SECTION 205-03: Front Drive Axle/Differential Ford 8.8-Inch Ring Gear 1999 F-150/250 Workshop Manual DISASSEMBLY AND ASSEMBLY Procedure revision date: 01/08/2003 Axle Front Drive Special Tool(s)
More informationLever-Type Dial Indicators SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT DIAL TEST INDICATORS. Bulletin No. 2232
Lever-Type Indicators DIAL TEST INDICATORS SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT Bulletin No. 2232 Enhanced Durability, Sensitivity and Readability Inspection The QR code is used by the factory to
More informationDISASSEMBLY AND ASSEMBLY
205-03-1 Front Drive Axle/Differential Ford 8.8-Inch Ring Gear 205-03-1 DISASSEMBLY AND ASSEMBLY Axle Front Drive Special Tool(s) 2-Jaw Puller 205-D072 (D97L-4221-A) Special Tool(s) Carrier Bearing Replacer
More informationDigimar 816 CL. Versatile. User-friendly operation... The measuring program... Precise measuring results...
- 2-8 Digimar 816 CL The new Height Measuring Instrument Digimar 816 CL. You want to obtain highly accurate measurement results without any complicated procedures? With the Digimar 816 CL you have the
More informationService INFO Calibration. Tool repair service of thread gauges. Calibration
Service Tool repair service -2 Calibration of thread gauges -16 Regrinding service -5 Calibration of plain gauges -17 Coating service -8 Calibration of appliances -19 INFO ISO 90 ff test equipment monitoring
More informationDIAL SNAP GAUGE. dial indicator is not included W. optional indicators
DIAL SNAP GAUGE dial indicator is not included 36 A 2 215-25W anvil Ø15 B 11 anvil 14 For quick Go/No-Go judgment of diameter of cylinders and shafts Anvil retracting stroke: 3mm Measuring force: 6-9N
More information