14 Construction. Kincrome Cement Mixer. Kincrome Plate Compactors. Kincrome Level Range CONSTRUCTION

Size: px

Start display at page:

Download "14 Construction. Kincrome Cement Mixer. Kincrome Plate Compactors. Kincrome Level Range CONSTRUCTION"

Quentin Greer
5 years ago
Views:

1 Construction 223

14 Construction A12 12 MONTH WAR RAN T A Y Kincrome Cement Mixer New to the range. This front tip mixer has 160 litre (5.65CF, 0.16m 3 ) capacity, single phase motor and 10 wheels.

The single cylinder engine is air cooled and can handle the toughest of tasks with ease. The compactors are ideal for sand, gravel and soils in trenches, along foundations and walls.

2 14 Construction A12 12 MONTH WAR RAN T A Y Kincrome Cement Mixer New to the range. This front tip mixer has 160 litre (5.65CF, 0.16m 3 ) capacity, single phase motor and 10 wheels. Stand is included, see details on page 226 Kincrome Plate Compactors Kincrome range two Plate Compactors - K14300 (60 Kg) and K14301 (80 Kg) - both powered by the Honda GX160 4 stroke, 5.5 Hp motor. The single cylinder engine is air cooled and can handle the toughest of tasks with ease. The compactors are ideal for sand, gravel and soils in trenches, along foundations and walls. They have foldable handles and built in wheels for easy transportation. Heavy duty shock mounts reduce vibration to the engine and handle. Also included in the range are the Concrete Vibrator and the Submersible Pumps. 224 Kincrome Level Range The three I-Beam Levels (600, 1200 and 2000mm) have a heavy duty aluminium frame, V-groove for pipes and conduit, and are magnetic. There are two I-Box Levels, 600 and 1200mm. They are magnetic and manufactured from advanced structural aluminium with comfort grips. Various small levels, builders squares, plumb bobs and combination squares are also available.

A12 12 MONTH WAR RAN T A Y Construction 14 Motor Honda GX160 4 Stroke 5.5Hp Motor Honda GX160 4 Stroke 5.5Hp Centrifugal Force 10.5kN Centrifugal Force 13.

Speed 14-15m/min Efficiency 450m 2 /hr Efficiency 300m 2 /hr Frequency 5600vpm Frequency 5500vpm K14300 60 Kg Plate Compactor K14301 80 Kg Plate Compactor Air cooled single cylinder 4 stroke engine

Sealed belt cover Heavy duty shock mounts to reduce vibration to the engine and handle Centrally located lifting bar Air cooled single cylinder 4 stroke engine Ductile Iron Base Plate provides better

3 A12 12 MONTH WAR RAN T A Y Construction 14 Motor Honda GX160 4 Stroke 5.5Hp Motor Honda GX160 4 Stroke 5.5Hp Centrifugal Force 10.5kN Centrifugal Force 13.5kN Compaction Depth 20cm Compaction Depth 30cm Base Plate Size (L x W) 550 x 360mm Base Plate Size (L x W) 550 x 490mm Operating Weight 80kg Operating Weight 88kg Travel Speed 14-15m/min Travel Speed 14-15m/min Efficiency 450m 2 /hr Efficiency 300m 2 /hr Frequency 5600vpm Frequency 5500vpm K Kg Plate Compactor K Kg Plate Compactor Air cooled single cylinder 4 stroke engine Ideal for sand, gravel and soils in trenches, along foundations and walls Foldable handle Self cleaning open plate Built in wheels for easy transportation Radius base plate for easy access to corners Sealed belt cover Heavy duty shock mounts to reduce vibration to the engine and handle Centrally located lifting bar Air cooled single cylinder 4 stroke engine Ductile Iron Base Plate provides better stability Self cleaning open plate Removable water tank with built in valve Radius base plate for easy access to corners Centrally located lifting bar Sealed belt cover Built in wheels for easy transportation Heavy duty shock mounts to reduce vibration to the engine and handle K14350 Concrete Vibrator K14360 Submersible Pump 38mm Diameter Poker 6m Flexible Shaft (Including Poker) 39 Kg Motor Honda GX160 4 Stroke 5.5HP 6m Flexible Shaft 75mm Diameter Pump 44 Kg Max. Flow Rate LPM Max. Head - 18 Metre Motor Honda GX160 4 Stroke 5.5HP 225

14 Construction A12 12 MONTH WAR RAN T A Y K14380 160L 240V Cement Mixer Front Tip Mixer 160L (5.65CF, 0.

5HP / 370w Motor Speed - 1420 RPM K14370 Unleaded Fuel Displacement Honda GX160 Dynapac Honda GX160 4 Stroke 5.

9cu) Max Output Max Torque 4.0kw (5.5bhp) @3600rpm 10.8 Nm @2500rpm Please visit: www.kincrome.com.

6L K16030 Post Hole Digger K14351 Vibrator Poker 38mm Diameter Poker Head 6m Flexible Shaft (Including Poker) Vibrating Speed: 9800-12000 VPM Shaft Rotation:

K14370 Max. Head - 18 Metre Power Head 51.7 CC 2 Stroke, Direct Drive Power Head, with Butterfly Handles 1.4 Kw (1.

4 14 Construction A12 12 MONTH WAR RAN T A Y K L 240V Cement Mixer Front Tip Mixer 160L (5.65CF, 0.16m3) 610mm Diameter 10 Pneumatic Wheels Stand Included Single Phase Motor 240V 50Hz 0.5HP / 370w Motor Speed RPM K14370 Unleaded Fuel Displacement Honda GX160 Dynapac Honda GX160 4 Stroke 5.5HP Motor 4 Stroke, overhead valve, single cylinder Air cooled Low oil protection Protective base and frame/carry handles Octane 91 or Higher 163cc (9.9cu) Max Output Max Torque 4.0kw 10.8 Please visit: for full list of spare parts Spring Loaded Anti-Tilt Safety Lock Oil Capacity 600ml (SAE 10W30) Fuel Tank 3.6L K16030 Post Hole Digger K14351 Vibrator Poker 38mm Diameter Poker Head 6m Flexible Shaft (Including Poker) Vibrating Speed: VPM Shaft Rotation: 3600 RPM Suits K14370 K14361 Submersible Pump Head & Shaft Compact with Aluminium Cast 6m Flexible Shaft 75mm Diameter Pump Max Flow Rate: 1200 LPM Suits K14370 Max. Head - 18 Metre Power Head 51.7 CC 2 Stroke, Direct Drive Power Head, with Butterfly Handles 1.4 Kw (1.8 HP) Recoil Starter Augers High Carbon Tunsten Carbide Coated Steel Tips 800 x 100mm Twin Vane 800 x 150mm Twin Vane with Shock Absorbing Spring 800 x 200mm Twin Vane with Shock Absorbing Spring Handy Metal Storage Box W810mm x D455mm x H445mm Scratch Resistant Hammer Tone Finish Hasp & Staple Lock Chain Stay Side Carry Handles Internal Compartments and Brackets for Secure Holding of Components Fuel Tank 1.2 Litre Fuel/Oil Mix Ratio 30:1 Idle Speed 2800 RPM Engine Speed 8500 RPM Max Torque 2.3 Nm 226

Construction 14 I-Box Levels Advanced structural aluminium for maximum durability Impact absorbing end caps Impact resistant solid block vials Non-marring side bumpers Comfort grips Magnetic Comes

24 metre) K11053 I-Box Level 600mm (24 ) K11054 I-Box Level 1200mm (48 ) I-Beam Levels Heavy duty quality level for all round use Heavy duty aluminium frame Shock absorbing rubber end caps Level

5 Construction 14 I-Box Levels Advanced structural aluminium for maximum durability Impact absorbing end caps Impact resistant solid block vials Non-marring side bumpers Comfort grips Magnetic Comes with protective blow mould case Milled edge Accurate up to mm (0.029 per metre) K11053 I-Box Level 600mm (24 ) K11054 I-Box Level 1200mm (48 ) I-Beam Levels Heavy duty quality level for all round use Heavy duty aluminium frame Shock absorbing rubber end caps Level and plum vials and 360 adjustable vial Magnetic V groove on one side for pipes and conduits Top read window Comes with protective blow mould case (except K11050) K11052 I-Beam Level 600mm (24 ) Inner/outer 6/12 K11051 I-Beam Level 1200mm (48 ) Inner/outer 6/12 K11050 I-Beam Level 2000mm (78 ) Inner/outer 6/12 227

6 14 Construction K11083 Carpenters Pencils Pack of 12 Ideal for Trade or DIY use Inner/outer 12/120 K11061 To level appliances, fence posts, tables and more 50 x 50 x 18mm Inner/outer 12/72 Surface Level K mm (9 ) Shock Resistant Torpedo Level Impact resistant body with rubber ends Durable aluminium rails with strong magnets inside Large acrylic high visibility vials Top read features Magnetic V groove accommodates conduit and pipe K11058 Heavy Duty Use to level machine tools, scales, pool tables and furniture 2 vials at x 45 x 10mm Inner/outer 12/72 Cross Check Level K Piece Lightweight construction to minimise line sag Snag-free open hooks allow free slide 75 x 20 x 13mm Inner/outer 12/72 Line Level Set K11066 Impact resistant solid block vials Super strong rare-earth magnet Milled working surface for improved accuracy 250 x 50 x 20mm 228 Pro-Cast Torpedo Level K11060 Aluminium Line Level 100mm (4 ) Heavy duty aluminium construction Snag-free open hooks allow free slide 100 x 20 x 10mm K11062 Magnets offer hands free working Establish level and plumb for post, flag poles, water pipes, railings & decks, in one application Inner/outer 12/72 Magnetic Post Level

Construction 14 K14110 Tradesman s Sawhorse Set TWIN PACK

steel blade Precision machined cast zinc body MM

resistant acrylic vial Brass bolt spring loaded blade

Handle 230mm (9 ) Hardwood handle with brass ends Etched

Load Capacity 900mm x 550mm x 760mm 400Kgs (each) K8090

loading Aluminium Trigger Frame Pin for cleaning nozzles

release lever Ergonomic TPR grip Hang hook Thrust Ratio -

Etched stainless steel blade MM graduation Hardened

ensures accurate settings Combination Square K11070

Plastic handle 3 way view vial K11064 Plumb Bob Brass 8oz

16oz Solid brass Hardened steel tip Two extra tips K11076

7 Construction 14 K14110 Tradesman s Sawhorse Set TWIN PACK Twin Pack Includes 2 sawhorses with trade tough bamboo tops 35mm Hardwood Bamboo Benchtop. Steel tubular folding legs with tough industrial powder coated paint finish. Quick release folding leg system, with base steel plates to ensure greater balance and control. K11067 Combination Square Metric 300mm Etched stainless steel blade Precision machined cast zinc body MM graduation Hardened removeable brass scriber Impact resistant acrylic vial Brass bolt spring loaded blade ensures accurate settings K11069 Sliding T Bevel Hardwood Handle 230mm (9 ) Hardwood handle with brass ends Etched stainless steel blade Metric graduation Dimensions Max Load Capacity 900mm x 550mm x 760mm 400Kgs (each) K8090 Caulking Gun Heavy Duty Steel Skeleton Frame for easy loading Aluminium Trigger Frame Pin for cleaning nozzles Nozzle tip cutter Friction feed mechanism Pressure release lever Ergonomic TPR grip Hang hook Thrust Ratio - 10:1 Inner/outer 6/12 K11068 High Impact Metric 300mm Etched stainless steel blade MM graduation Hardened removeable brass scriber High impact ABS body Impact resistant acrylic vial Brass bolt spring loaded blade ensures accurate settings Combination Square K11070 Sliding T Bevel High Impact Handle 200mm (8 ) High impact Plastic handle 3 way view vial K11064 Plumb Bob Brass 8oz Solid brass Hardened steel tip K11065 Plumb Bob Brass 16oz Solid brass Hardened steel tip Two extra tips K11076 Magnetic Angle Finder Determine any angle Accurate to 1/2 of 1 degree Magnetic Attach to Straight Edge or Builders Square for fast readings 229

8 14 Construction K11071 High Impact Ideal for level, plumb and mitre work Etched stainless steel blade 250mm High impact moulded handle Impact resistant acrylic vial Metric with mm graduations Try Square K11072 Ideal for level, plumb and mitre work Etched stainless steel blade 250mm Quality hardwood handle Metric with mm graduations Try Square Hardwood Handle K11073 Builders Square Steel 400 x 600mm High grade tempered steel Blades coated to resist rust Permanently impressed graduation Reverse reading scale K11074 High grade tempered steel Blades coated to resist rust Permanently impressed graduation Reverse reading scale Builders Square Steel 200 x 300mm K11075 Aluminium 400 x 600mm High grade aluminium steel High visibility permanently impressed graduation Reverse reading scale Builders Square 230

Agriculture & Farming

Agriculture & Farming 239 16 Pressure Sprayers Kincrome is proud to release the new range of Pressure Sprayers ideal for a range of agricultural to automotive uses, designed and manufactured for trade or home. There are four