Electric Power Tools Created :05 Revised :08 Page 1

Transcription

1 2005 Created :05 Revised :08 Page 1

2 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric Hammer Drill 6 Scroll Saw 6 Jig Saw Kit 7 Circular Power Saw with Laser 7 Bench Grinder 8 9 Table Disc and Belt Sander 10 Cutting Stands Cordless Hammer Drill 12 Cordless Screwdriver Kit 12 Created :05 Revised :08 Page 2

3 Electric Hoists Chain Hoist SHZ SHZ SHZ SHZ 1000 FZ 1000/1 - Payload without pulley: 150 kg 250 kg 300 kg 500 kg 1000 kg With pulley 300 kg 500 kg 600 kg Lifting height without pulley: 11,5 m 11,5 m 11,5 m 12 m ~ 2,5 m With pulley 5,7 m 5,7 m 5,7 m 6 m - Mains: 230 V~ 50 Hz 230 V~ 50 Hz 230 V~ 50 Hz 230 V~ 50 Hz - Power: 550 watts S3 20 % 900 watts S3 25 % 1050 watts S3 20 % 1600 watts S3 20 % - Rope speed without pulley:. 10 m/min 10 m/min 10 m/min 10 m/min with pulley: 5 m/min 5 m/min 5 m/min 5 m/min 12,20 kg 17,10 kg 17,80 kg 33,70 kg 9,40 KG 36 x 22 x 14,5 cm 40 x 25 x 15 cm 40 x 24,5 x 15,5 cm 54,5 x 23,5 x 30,5 cm 25 X 17,5 X 17 cm Supplied with: Fastening with 2 double clamps Start button with emergency button Deflection pulley with payload hook 12 m non-rotating (kinking) steel wire Ø 3,05 mm Ø 4,2 mm Ø 4,5 mm Ø 5,6 mm Motor with thermal cut-out An automatic brake secures the load in any position Rotary hoist frame SA Art.Nr Barcode Packing unit Qty 20' / 40' container / / / / / -- Created :05 Revised :08 Page 3

4 Pneumatic Hammer Drills BH-G 726 BH-G 826/1 - Mains: 230V ~ 50 Hz - Power: 750 watts - Idle speed: min -1 - Impacts: min -1 - Drill capacity max. Ø: - Metal: 13 mm - Concrete / Stone: 26 mm - Wood: 30 mm - Chuck size Ø: 43 mm - Insulation class: II 5,00 kg 39 x 27 x 11 cm - Power: watts - No-load speed: 800 min -1 - No. of impacts: 300 min -1 - Single impact effect: 4 Joule - Drill capacity: 26 mm concrete/stone - Insulation class: II 7,80 kg 43 x 35,5 x 12,5 cm Supplied with: - Continuously adjustable speed control with pre-selection speed setting - Left-right setting - Setting for drilling and screwing in metal or wood - Turning stop for chisel work - Hammer drills Ø 12 mm, 16 mm, 18 mm - Pointed- and flat chisel - Additional handle with depth gauge - Carrying case Art.Nr Barcode Packing unit 5 Qty 20' / 40' container / Chisel Set 3-pcs tlg. Drill bits and chisel Set Ø 5, 6, 8, 10, 12, 14, 16, 18, 22 mm, 1 flat chisel Art.Nr Barcode Packing unit 3 Qty 20' / 40' container / / (40' HC) Created :05 Revised :08 Page 4

5 Electric Hammer Drill Paint And Mortar Mixer BH-G 1000 FMR-G Power rating: 1010 watts - Idle speed: 850 min -1 - Blow rate: min 1 - Drilling capacity max.: 26 mm in concrete/stone - Protection class: II - Voltage: 230 V ~ 50 Hz - Power rating: 800 watts - Drilling capacity: max. 23 mm - Idle speed: min -1 Packing Dimensions: 8,60 kg 45 x 38 x 13,5 cm 5,30 kg 37 x 30 x 13,5 cm Features (electric hammer drill): - Rotation stop facility - Hammer stop facility - SDS- Plus Drill-chuck - Additional handle - Bit stop Standard accessories: - Hammer drill bits Ø 8, 10, 12 mm - Pointed chisel bit Chisel Set 3-pcs tlg. Drill bits and chisel Set Ø 5, 6, 8, 10, 12, 14, 16, 18, 22 mm, 1 flat chisel Art.Nr Barcode Packing unit 3 Qty 20' / 40' container / Features: - Reverse facility - Scroll chuck 3-16 mm - Additional handle - MK2 holder - Drill chuck key - Drill drift Mixer Set 3 pcs Art.Nr Barcode Packing unit 2 Qty 20' / 40' container / / (40' HC) Created :05 Revised :08 Page 5

6 Electric Hammer Drill BM-G Power: 1100 watts - Drilling capacity: concrete 16 mm metal 13 mm wood 32 mm - No-load speed: I min -1 II min -1 5,30 kg 45 x 39 x 12,5 cm Features (impact drill): - Electronic speed control with pre-selection settings - Reverse-switch drilling/hammer drilling - Reverse-switch right/left-rotation - Quick locking chuck 2-13 mm - Additional handle with depth gauge - Metal gear housing - 2-gears - Housing surface softpainted Standard accessory: - Plastic carrying case with window - Tape measure 3 m - 1 drill bit each for wood Ø 5, 6, 8 mm - 1 HSS-drill bit each Ø 3, 4, 5, 6, 8 mm - 1 drill bit each for stone Ø 5, 6, 8 mm - 1 holder for drill bits Art.Nr Barcode Packing unit 3 Qty 20' / 40' container / / (40' HC) Scroll Saw DKS 450/1 E - Power: 120 watts S2 5 min. - Idle stroke speed: n 0 : min -1 - Height of stroke: 21mm - Length of saw blade: 127 mm - Cutting height max.: 57 mm/90, 27 mm/ 45 - Throat depth: 406 mm - Table size: 410 x 253 mm - Table tiltable: 0 to 45 - Space required: 410 x 245 mm Transmitting height: 50 mm / 90 at max. throat depth 10 mm / 45 at max. throat depth Features: - Sawdust blower facility - Stroke rate electronic - no-voltage releasing magnet - dust extraction device - adapter for leave saw blades 14,40 kg 64 x 28,5 x 34 cm Spare blade set 5 pcs Art.Nr Barcode Packing unit 1 Qty 20' / 40' container 503 / Created :05 Revised :08 Page 6

7 Jig Saw Kit Circular Power Saw with Laser PS-G 710 HKL-G Voltage: 230 V ~ 50 Hz - Power rating: 710 watts - Blade speed n o : 500-3,000 min -1 - Cutting depth: In wood max. 80 mm In iron max. 10 mm In plastic max. 20 mm - Bevel cut: max. 45 Features (jigsaw): - Blade speed control electronics - Soleplate tilts up to 45 to the left and right - Tran- Allen key sparent guard - Integrated dust extractor - Parallel stop - Pendulum action with 4 settings 0/1/2/3 - Soft-painted housing surface Standard accessories: - Plastic case with window - 3 jigsaw blades for iron - 12 jigsaw blades for wood - 1 carpenter's pencil 4,50 kg 45 x 39 x 12,5 cm - Power: 1400 Watt - Idle speed: min -1 - cutting depth at 90 : 64 mm - cutting depth at 45 : 45 mm - saw blade: Ø 185 x Ø 20 x 2,8 mm - laser class: II - double insulated Packing dimension: Features: - plastic carrying case - laser capacity - housing surface Softpainted - Softstart Standard accessories : - Carbide tipped saw blade, 60 teeth - parallel guide stop - 2 battery 1,5 V (AAA) 7,55 kg 38 x 27 x 31 cm HM-Saw blade 185 x 20 x 2,4 mm 24 teeth HM-Saw blade 185 x 20 x 2,4 mm 60 teeth Art.Nr Barcode Packing unit 3 Qty 20' / 40' container / / (40' HC) Art.Nr Barcode Packing unit 2 Qty 20' / 40' container 864 / / (40' HC) Created :05 Revised :08 Page 7

8 Bench Grinder NTS Power: 400 watts S2 30 min - Idle speed of dry grinding wheel: 2800 min -1 wet grinding wheel: 134 min -1 - Dry grinding wheel: Ø 150 x 20 x Ø 32 mm; K 36 - Wet grinding wheel: Ø 200 x 40 x Ø 20 mm; K 80 12,0 kg 42 x 26 x 27 cm Features: - Strong worm-drive for the wet stone - Corrosion-free water container - Slow running, fine grain sharpening wet grinding wheel Ø 200 x 40 mm - Fast running dry grinding wheel Ø 150 x 20 mm - Adjustable spark protection - Large eye protection shield - Adjustable tool rest Wet stone Ø 200 x 40 x 20 mm Art.Nr Barcode Packing unit 1 Qty 20' / 40' container 950 / Created :05 Revised :08 Page 8

9 Bench Grinders DSC 125 DSC 150 DSC 175 DSC V ~ 50 Hz 230 V ~ 50 Hz 230 V ~ 50 Hz - No load speed: 2800 min min min min -1 - Power: 180 watts; S2 30 min 350 watts, S2 30 min 400 watts, S2 30 min 400 watts, S2 30 min - Grinding wheels: Ø 125 x 16 x 20 mm 150 x 20 x 31 mm Ø 175 x 25 x 32 mm Ø 200 x 25 x 32 mm Ø 6,00 kg 9,00 kg 10,80 kg 12,20 kg 29 x 17,5 x 20 cm 36 x 19 x 24 cm 36 x 24 x 26 kg 37 x 25 x 29 cm Grinding wheel, smooth 125 x 16 x 20 mm Grinding wheel, rough 125 x 16 x 20 mm Grinding wheel smooth 150 x 20 x 32 mm Grinding wheel rough 150 x 20 x 32 mm Grinding wheel smooth 175 x 20 x 32 mm Grinding wheel rough 175 x 20 x 32 mm Grinding wheel smooth 200 x 25 x 32 mm Grinding wheel rough 200 x 25 x 32 mm Art.Nr Barcode Packing unit Qty 20' / 40' container / / / / -- Created :05 Revised :08 Page 9

10 Table Disc And Belt Sander Cutting Stand BTS 400/150 TS 23 - Power: 350 watts - No-load speed: rpm - Ø Sanding disc: 150 mm - Sanding plate: 914 x 100 mm Features: Base plate made of sturdy sheet steel, size 29 x 29 cm Strong upper body made o aluminium casting with a robust lag-hinge and spring release Rapid tool clamping device Universal type bracket fixing the angle grinder Packing Dimensions: 16,9 kg 500 x 295 x 255 mm 4,25 kg 33 x 31 x 10,5 cm Supplied without angle grinder! Sanding belt kit 3 pcs, Sanding discs 3 pcs, Art.Nr Barcode Packing unit 1 Qty 20' / 40' container 750 / -- Art.Nr Barcode Packing unit 1 Qty 20' / 40' container -- Created :05 Revised :08 Page 10

11 Cutting Stands TS 125/115 TS Size of base plate: 185 x 235 mm - For angle grinder: 115 and Size of base plate: 300 x 300 mm - For angle grinder: 230 mm Packing dimension: 3,05 kg 20,3 x 9 x 26 cm Packing dimension: 3,50 kg 30 x 30 x 13 cm Feature: - Solid cast-iron base - Strong upper body made of cast aluminium with a robust lag-hinge and spring release - Adjustable tool clamping device - Universal adjustable fixing brackets for angle grinder - Spark protection Feature: - Universal adjustable fixing brackets for angle grinder - Spark protection - Adjustable tool clamping device - Solid steel-panel base - Strong base plate made of cast aluminium with a robust lag-hinge and spring release Supplied without angle grinder! Supplied without angle grinder! Art.Nr Barcode Packing unit 4 Qty 20' / 40' container / Art.Nr Barcode Packing unit 6 Qty 20' / 40' container / / Created :05 Revised :08 Page 11

12 Cordless Hammer Drill Cordless Screwdriver Kit ABH-G 24-2 AS-G 14,4 Technical data hammer drill: - Idle speed: 0 to 1000 rpm - power pack capacity: 1,8 Ah - Blow rate: 0 to 4400 rpm - drilling capacity in concrete: max. 20 mm 8,2 kg 49 x 41 x 14 cm Technical data charger: - charging time: approx. 1 h - charging current: 2,4 A Features hammer drill: - speed control - switch right/left-rotation - drilling/impact drilling - 2 pcs NiCd-power packs 24 V - additional handle - drilling depth fence - drill-chuck - display for power pack capacity Standard accessories: - 1 drill-bits each Ø 6/8/10/12 mm - 1 charger - dust absorbing cap - carrying case Spare power pack: Battery voltage: - Battery capacitance: 14.4 volts 1.3 Ah - Idle speed: I min -1 (cordless screwdriver): - Speed control electronics - Quick-change drill chuck 1-10 mm - 2 interchangeable batteries 14.4 V - 1-hour battery charger - 2-speed gearing - 16-step torque selector - Reverse facility - Soft-painted housing surface Standard accessories: - Plastic case with window - Measuring tape 3 m - 6 bit inserts - 1 magnetic bit holder for drill - 1 magazine for bit inserts and bit holders - Wood drill bits Ø 5, 6, 8 mm - HSS drill bits Ø 2, 3, 4, 5, 6 mm - 1 holder for drill bits II min -1 5,30 kg 44 x 38,5 x 12 cm With second battery Art.Nr Barcode Packing unit 3 Qty 20' / 40' container 924 / Art.Nr Barcode Packing unit 3 Qty 20' / 40' container / / Created :05 Revised :08 Page 12