Measuring. Affordable. Effective. Instruments
|
|
|
- Darrell Nash
- 6 years ago
- Views:
Transcription
1 Measuring Effective Affordable Instruments
2 2 Electronic Calipers n Stainless steel frame n Thumb wheel for rapid setting n Direct Metric/Inch conversion n Accuracy to 0,02 mm (150 mm models), 0,04 mm (200 and 300 mm models) n Resolution to 0,01 mm/ in n Large easy-to-read LCD display n Include inspection report n Supplied with molded case Order No. Range Jaw Length Thumb wheel mm in mm Value model
3 Shockproof Dial Calipers n 4-way measuring n Solid stainless steel construction n Silky smooth movement throughout the entire range n Include inspection report n Supplied in a shop-hardened case Order No. Range Reading Range per Rev Jaw Length Thumbwheel Dial Face Metric Models mm mm mm mm , White , White , White , White Inch Models in in in in Black White White White Calipers
4 4 Vernier Precision Calipers Calipers The finest of vernier calipers for precise measurements n Made of stainless steel n Satin-chrome finished scale and vernier n Delivered with inspection report Order No. Range Vernier Reading Jaw Length Lower Scale Upper Scale Lower Scale Upper Scale Metric Models mm mm mm , , , , , ,05 60 Metric/Inch Models mm in mm in mm ,05 1/ , ,05 1/ , , Inch Models in in in in in / /
5 Auto Lock Vernier Calipers Order No. Range Vernier Reading Jaw Length Lower Scale mm Upper Scale in Lower Scale mm Upper Scale in , , ,05 1/ mm Auto Lock and Parallax Free Vernier Calipers Order No. Range Vernier Reading Jaw Length Lower Scale mm Upper Scale in Lower Scale mm Upper Scale in , ,05 1/ mm c Depth Measuring Base for 150 mm Calipers a b Order No. a (mm) b (mm) c (mm) ,2 30,2 Calipers
6 6 Vernier Depth Calipers Calipers The finest of vernier calipers for accurate work n Made of stainless steel n Satin-chrome finished scale and vernier n Supplied in a shop-hardened case with inspection report Order No. Range Reading Main Cross Section Bridge Length Metric Models mm mm mm mm ,02 8 x ,05 8 x ,02 12 x ,05 12 x ,02 12 x ,05 12 x Inch Models in in in in x x x 0. 6 Dial Depth Calipers Order No. Range Reading Range per Rev n Solid stainless steel construction n Silky smooth movement throughout the entire range n Supplied in a shop-hardened case, with inspection report Bridge Length Dial Face Metric Models mm mm mm mm , White , White , White Inch Models in in in in White White White Removable Bridge for Depth Calipers n Made of stainless steel. Available for all models. Order No. Description Optional bridge, size 180 mm Optional bridge, size 260 mm Optional bridge, size 320 mm
7 Electronic Outside Micrometers IP n Protection level IP54 n Absolute measurement n Carbide-tipped measuring faces n Digital Resolution to 0,001 mm/ in n Micrometer head resolution to 0,01 mm/ in n Sizes over 25 mm/1 in include a setting standard n Ratchet friction thimble and locking nut n Delivered in a plastic case with inspection report Main Features Auto power ON Inch/Metric conversion Origin data set SR44 battery Auto power OFF Order No. Range Resolution Accuracy Setting Digital Micrometer heads Standard Metric Models mm mm mm mm mm ,001 0,01 0, ,001 0,01 0, ,001 0,01 0, ,001 0,01 0, Inch Models in in in in in Electronic Outside Micrometer Sets IP54 Order No. Range Pieces Setting Standard Metric Models mm mm and , 50 and 75 Inch Models in in and , 2 and 3 Delivered complete in a plastic case with inspection report for each micrometer. B L D 28,5 A 19,5 Range Dimensions (mm) Metric (mm) Inch (in) A B D L , , , ,0 107 External Micrometers
8 8 Digit Outside Micrometers n High resolution mechanical digit counter for quick and error-free reading n Carbide-tipped measuring faces n Counter resolution to 0,001 mm / in n Micrometer head resolution to 0,01 mm / in n Sizes over 25 mm /1 in include a setting standard n Ratchet friction thimble and locking nut n Delivered in a plastic case with inspection report Order No. Range Resolution Accuracy Setting Counter Micrometer heads Standard Metric Models mm mm mm mm mm ,001 0,01 0, ,001 0,01 0, ,001 0,01 0, ,001 0,01 0, Inch Models in in in in in Digit Outside Micrometer Sets Order No. Range Pieces Setting Standard Metric Models mm mm and , 50 and 75 Inch Models in in and , 2 and 3 Delivered complete in a plastic case with inspection report for each micrometer. A L 40,5 50,5 B 6,5 19,5 2,5 C Range Dimensions (mm) Metric (mm) Inch (in) A B C L , , , ,
9 Parallax-Free Outside Micrometers n Parallax-free vernier scale for high precision measurement n Carbide-tipped measuring faces n Sizes over 25 mm include a setting standard n Ratchet friction thimble and locking nut n Delivered in a plastic case with inspection report Order No. Range (mm) Resolution (mm) Accuracy (mm) ,001 0, ,001 0, ,001 0, ,001 0, Setting Standard Parallax-free Outside Micrometer Sets A L 17 C B 6,5 28,5 Order No. 64 Range (mm) 19,5 Pieces Setting Standard (mm) and , 50 and 75 Delivered complete in a plastic case with inspection report for each micrometer. Range Metric Dimensions (mm) (mm) A B C L , , , ,0 107 External Micrometers
10 10 Value Micrometers n Carbide-tipped measuring faces n Graduations to 0,01 mm/ in n Sizes over 25 mm / 1 in include a setting standard n Ratchet friction thimble and locking nut n Delivered in a plastic case with inspection report Order No. Range Accuracy Setting Standard Metric Models mm mm mm , , , , , , , , , , , , Inch Models in in in Value Micrometer Sets Order No. Range Pieces Setting Standard Metric Models mm mm and , 50 and 75 Inch Models in in and , 2 and 3 Delivered complete in a plastic case with inspection report for each micrometer.
11 11 B L A C 6,5 19,5 A L B 28, , mm / 0 8 in C 6, mm Range Dimensions (mm) Metric (mm) Inch (in) A B C L , , , , , , , , ,5 19, ,5 19, ,5 19, ,5 19, Chrome Frame Micrometers with decimal equivalents on frame n Black decimal equivalents on satin chrome finished forged steel frame n Carbide-tipped measuring faces with a 0.25 in dia. n Graduations to in n Sizes over 1 in include a setting standard n Ratchet friction thimble and locking nut n Delivered in a plastic case with inspection report Order No. Range Accuracy Setting Standards in in in External Micrometers
12 12 External Micrometers Micrometers with interchangeable anvils n Steel-plate frame up to 300 mm Pipe combined frame over 300 mm n Graduations to 0,01 mm n Include setting standard n Ratchet friction thimble and locking nut n Delivered in a plastic case with inspection report Order No. Range (mm) Accuracy (mm) A (mm) L (mm) Anvil , , , , , , , , Setting Standard 20 L 28 A
13 Universal Micrometers Non-Rotating Spindle n Wide application range through the availability of 7 pairs of interchangeable contact points n Hardened steel anvil n Graduations to 0,01 mm n Ratchet friction thimble and locking nut n Delivered in a plastic case with inspection report Order No. Range (mm) Accuracy (mm) C (mm) L (mm) , , , , L 17 C 64 19,5 External Micrometers
14 14 Interchangeable Measuring Tips in Pairs External Micrometers Order No. Description Flat, 6,5 mm dia. ø6.5 ø5 4.5 R= Spherical, R = 5 mm ø ø Small and flat, 2 mm dia. ø Disk-shaped, 12 mm dia. ø Blade-type, H x L = 0,7 x 3,5 mm ø Cone-shaped, 60, R = 0,3 mm ø Knife-edged, 60, 0,3 mm Full set of contact points
15 Universal Micrometers n Carbide-tipped spindle tip n Hardened steel anvil n Graduations to 0,01 mm n Ratchet friction thimble and locking nut n Chrome plated frame n Delivered in a plastic case with inspection report A ,5 6,5 19,5 1,5 6,5 d Order No. Range (mm) Accuracy (mm) A (mm) d (mm) ,004 28, ,004 53,5 5 External Micrometers
16 Tube micrometer n Carbide-tipped spindle tip n Hardened steel anvil n Graduations to 0,01 mm n Ratchet friction thimble and locking nut n Delivered in a plastic case with inspection report ø5 1,2 25 Order No. Range (mm) Accuracy (mm) ,006 Micrometer Heads with Non-rotating spindle n Carbide-tipped spindle tip n Ratchet friction thimble and locking nut n Delivered in a plastic case with inspection report ,5 17,5 10 ø8 ø12 h6 ø,5 ±0, Order No. Range (mm) Reading (mm) Accuracy (mm) ,01 0, ,002 0,003
17 Vernier Tool Set, Metric 17 Order No. Description Metric Vernier tool set including: 1 Micrometer with a 0 25 mm range, 0,01 mm reading Vernier caliper with a 150 mm range, 0,05 mm reading Suited black colored plastic case 1 Inspection report provided with each tool Vernier Tool Set, Inch Order No. Description Inch Vernier tool set including: 1 Micrometer with a 0 1 in range, in reading Vernier caliper 6 in, in /1/ 128 in reading Suited black colored plastic case 1 Inspection report provided with each tool Tool Sets
18 18 Electronic Tool Set Tool Sets Order No. Description Electronic tool set including: 1 Electronic micrometer with a 0 25 mm range, 0,001 mm resolution VALUE caliper, 150 mm, 0,01 mm resolution Suited black colored plastic case 1 Inspection report provided with each tool
19 Adjustable Micrometer Stand Order No. Description Micrometer stand Order No. Description Micrometer stand Heavy model Interchangeable Spherical Anvil 5 mm / 0.2 in steel ball diameter. Used for measuring tube thickness. Order No. Description Interchangeable spherical anvil Micrometer Accessories
20 Ø8 D Ø 20 Metric Models Order No. Inch Models mm ± 0,0012 ± 0,0012 ± 0,0015 ± 0,0020 ± 0,0025 ± 0,0025 ± 0,0025 ± 0,0035 ± 0,0035 ± 0,0035 ± 0,0040 ± 0,0040 ± 0,0045 ± 0,0045 ± 0,0045 ± 0,0045 ± 0,0050 ± 0,0050 ± 0,0050 ± 0,0050 ± 0,0055 ± 0,0055 ± 0,0055 ± 0,0065 ± 0,0065 ± 0,0065 ± 0,0075 ± 0,0075 ± 0,0075 ± 0,0075 ± 0,0090 mm Nominal dimensions in Precision D in ± ± ± ± ± ± ± in D Measuring faces Measuring faces Ø8 D Precision D Nominal dimensions mm Ø8 Order No. D Ø8 Spherical measuring face n For calibrating zero position on outside micrometers n With heat insulating handle to prevent heat expansion n Delivered with inspection report Ø8 Flat measuring face D Setting Standards
21 Value Vernier Depth Micrometers n High accuracy interchangeable depth rods, adjusted in increments of 25 mm / 1 in. No Need for resetting when changing rods. Rod diameter 4,5 mm n Satin chrome finish n Hardened base surface, ground and lapped n Resolutions: 0,01 mm for metric models in for inch models n Ratchet stop and locking nut n Supplied in a plastic case with inspection report 21 Order No. Range Accuracy Base Depth Rods Metric Models mm mm mm , , , , , ,5 6 Inch Models in in in Depth Micrometers
22 22 Three-point Internal Micrometers Application range from 6 up to 100 mm / in up to 4 in n Measure close to the bottom of blind bores n Allow access to deep holes with an extension delivered as standard n Carbide-tipped contact points for ranges mm / in n Supplied with setting rings and extensions n Delivered with inspection report A A L1 Three-Point Internal Micrometers Order No. Range Resolution Accuracy Setting Rings L1 L1 A Extensions Metric Models mm mm mm mm mm mm mm ,001 0, ,5 0, ,001 0, ,5 0, ,001 0, ,5 0, ,005 0, , ,005 0, , ,005 0, , ,005 0, , ,005 0, , ,005 0, , ,005 0, , ,005 0, , ,005 0, , ,005 0, ,5 150 Inch Models in in in in in in in
23 Three-Point Internal Micrometer Sets Order No. Range Individual Range Setting Rings Extensions Metric Models mm No. mm No. mm No. mm Inch models in No. in No. in No. in Delivered complete in a plastic case with inspection report for each micrometer. Three-Point Internal Micrometers
24 24 Extensions for Three-Point Micrometers Order No. Description Sizes Metric Models mm Extension for range 6 12 mm Extension for range mm Extension for range mm Extension for range mm Extension for range mm 150 Inch Models in Extension for range in Extension for range in Extension for range in Extension for range in Extension for range 2 4 in 6 Setting Rings Used for zero-setting of internal micrometers and three-point micrometers. A: Uncertainty of stamped diameter B: Cylindricity C: Error between actual and nominal values Order No. Size A B C Metric Models mm mm mm mm ± 0,0015 0,0010 ± 0, ± 0,0015 0,0010 ± 0, ± 0,0015 0,0010 ± 0, ± 0,0015 0,0010 ± 0, ± 0,0015 0,0010 ± 0, ± 0,0015 0,0010 ± 0, ± 0,0015 0,0015 ± 0, ± 0,0015 0,0015 ± 0,02 Inch Models in in in in ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ±
25 25 Dial Scribing Gauges n Solid stainless steel construction n Silky smooth movement throughout the entire range n Include inspection report n Supplied in a shop-hardened case Order No. Range Reading Range per rev. Dial Face Metric Models mm mm mm ,01 1,0 White ,01 1,0 White Inch Models in in in White White Inch/Metric Vernier Scribers The finest of vernier scribers for accurate work. n Made of stainless steel n Satin-chrome finished scale and vernier n Delivered with inspection report Scribing Gauges Order No. Range Vernier Reading Left scale Right scale Left scale Right scale mm 0 12 in 0,02 mm in mm 0 20 in 0,02 mm in
26 26 Scribing Gauges Electronic Scribers n Direct Metric/Inch Conversion n Accuracy: Model 300 mm / 12 in: ± 0,04 mm Model 600 mm / 24 in: ± 0,05 mm n Resolution to 0,01 mm / in n Large, high-contrast LC display n Hold feature n ABS/INC measurement n Direct RS232 data output n Floating zero n Positive lock, carbide scriber n Moulded case included n Delivered with inspection report Order No. Range mm Range in Universal Vernier Bevel Protractor, 300 mm / 12 in n Made of stainless steel. n Satin-chrome finished, laser stamped scales n Parallax free so as to avoid any reading error n Magnifying glass for easy reading n Adjustable beam to any position within the measuring range Order No. Range Reading Scale Length x mm/12 in
27 Precision Dial Gauges 27 n Full-metal bezel and case housing n Fixing shank and plunger in hardened stainless steel n Insert fitted with a 3,175 mm diameter steel ball tip n Adjustable tolerance markers n Measuring insert with a M2,5 thread n Fixing shank (metric) 8h6 mm dia., AGD in dia. n Delivered with inspection report Models with a 40 mm dial diameter, reading to 0,01 mm With extra red tinted reverse numbering Order No. Range Reading Travel/Rev. Graduations mm 0,01 mm 1 mm 6 Jewelled mm 0,01 mm 1 mm 6 Jewelled Maximum permissible errors 0,01 mm Reading Range 3 mm 5 mm Deviation span 10 µm 12 µm Total deviation span 12 µm 14 µm Max. hysteresis 3 µm 3 µm Local deviation span (0,1 mm) 5 µm 5 µm Repeatability limit 3 µm 3 µm Precision DiAl Gauges
28 28 Models with a 60 mm dial diameter, reading to 0,01 mm With extra red tinted reverse numbering Maximum permissible errors 0.01 mm Reading Range 10 mm 20 mm 30 mm Deviation span 15 µm 22 µm 28 µm Total deviation span 17 µm 25 µm 30 µm Max. hysteresis 3 µm 5 µm 5 µm Local deviation span (0,1 mm) 5 µm 10 µm 10 µm Repeatability limit 3 µm 3 µm 3 µm Order No. Range Reading Travel/Rev. Graduations Value models mm 0,01 mm 1 mm mm 0,01 mm 1 mm Jewelled mm 0,01mm 1 mm Jewelled Shockproof Waterproof model mm 0,01 mm 1 mm Waterproof Longue range models mm 0,01 mm 1 mm mm 0,01 mm 1 mm Waterproof model without adjustable tolerance markers Models with a 60 mm dial diameter, reading to 0,002 mm or 0,001 mm Order No. Range Reading Travel/Rev. Graduations mm 0,001 mm 0,2 mm Jewelled Shockproof mm 0,002 mm 0,2 mm Jewelled Shockproof mm 0,001 mm 0,2 mm Jewelled Shockproof mm 0,002 mm 0,2 mm Jewelled Shockproof Maximum permissible errors Range 3 mm 5 mm Reading 0,002 mm 0,001 mm 0,002 mm 0,001 mm Deviation span 9 µm 8 µm 12 µm 9 µm Total deviation span 10 µm 9 µm 13 µm 10 µm Max. hysteresis 4 µm 4 µm 4 µm 4 µm Local deviation span (0,1 mm) 7 µm 6 µm 7 µm 6 µm Repeatability limit 1 µm 1 µm 1 µm 1 µm
29 AGD 2 Dial Indicators n Travel to 1 in n Continuous reading in n AGD 2 with a 2 1/4 in dial diameter n Revolution counter n Tolerance markers n Central lug back n Carbide points n Inspection report included n Delivered in a suited case made of industrial plastic Order No. Range Reading Travel/Rev. Dial Face in in in White in in in Black in in in White Shockproof Maximum permissible errors or in reading Range 0.5 in 1 in Repeatability 0.20 scale division 0.20 scale division Hysteresis 0.33 scale division 0.33 scale division Accuracy One revolution 1.00 scale division 1.00 scale division First 2,5 revolution 1.00 scale division 1.00 scale division > 2,5 thru 10 revolutions 3.00 scale division 2.00 scale division Standard Accessories Order No. Description Central lug back for indicators with a 40 mm dial diameter Central lug back for indicators with a 60 mm dial diameter Dial Indicators
30 30 STANDARD GAGE - VISUAL 250 Main features The VISUAL Vision Machine 250 is the answer to a growing demand of industry for workpieces that could not be measured using common tactile tools. The new VISUAL 250 is compact but with no compromise on its metrological performances. This manual machine meets most of the market needs for 2D-measurement. Featuring a solid mechanical construction, the machine can equally be used in the workshop as in the inspection laboratory. Equipped with TESA-VISTA the software that requires less than a half-day training the VISUAL 250 vision machine is a perfect multi-tasking and multi-users inspection means. n Exceptional Quality/ Price ratio The machine has been specially marketed to offer an alternative option in the field of vision at highly optimized costs, whilst guaranteeing optimum accuracy along with a highquality level. n X/Y measuring tables Both X and Y coordinate tables have a built-in, manually-operated release system, thus speeding up any displacement needed to reach the measurement area. n Manual zoom Your VISUAL 250 comes with an indexable handoperated zoom, with optical magnifications from 0,7x up to 4,5x (6,5 : 1). n Light illumination The Visual 250 is fitted with two illuminations through LEDs i.e. one ringlight for episcopic illumination (top) along with one diascopic illumination (bottom) for the part profile projection. Both are controlled over the software interface. n Z-axis This coordinate axis is moved from the front of the machine, directly. n Laser pointer A laser pointer is included to make easier tracing the measurement zone on the part being inspected.
31 31 Clamp system The Visual 250 can be used in conjunction with the VISIOFIX clamping system, which has been specially developed for vision machines. Consisting of many different elements, this system is available in either of the two following kits: VisioFix LITE, including 35 clamping elements VisioFix STANDARD, including 51 clamping elements Software TESA-VISTA allows quick and accurate measurement of most geometrical part features. This application software can be run by a trained operator as well as by a metrologist. It provides the user-friendliness and flexibility needed to create measurement reports. Training takes just half a day. A clearly arranged User s interface makes this machine very easy to use. Technical specifications Releasable X-axis Releasable Y-axis Measuring volume (X/Y/Z) Maximum workpiece weight Accuracy MPE XY (E1 XY) MPE XY (E2 XY) **m 5 kg, uniformly distributed Camera and Optics CCD colour camera, 752 x 582 pixels Indexable zoom (0,7x up to 4,5x) Diascopic illumination, white LED Ringlight with a white LED Red laser pointer for tracing 250 x 150 x 200 mm 10 kg 3,9 µm + L /150** (L in mm) 4,9 µm + L /150** (L in mm) Additional specifications Weight (w/o viewing screen and computer) 180 kg Power supply 115 to 230 Vac +/- 10%, 50 to 60 Hz Size (w/o viewing screen and computer), L x H x D 7 x 1015 x 753 mm Reference temperature 20 C +/- 1 C Operating temperature range 10 C to 40 C Relative humidity < 80%, non-condensing TESA-VISTA application software Vision Machine
32 All modification rights reserved Measuring Affordable Effective Instruments
0268 Gear tooth calipers
0268 Gear tooth calipers Stainless steel Factory standard Locking screw Fine adjustment 1 Hardened jaw tips Carbide tipped jaw tips Module Reading Ref. No. List price mm mm 1-26 0.02 0268 201 285.00 1-26
Small Tool Instruments and Data Management
Small Tool Instruments and Data Management Digital Micrometers Pages 28 34 Analogue Micrometers Pages 35 42 Special Version Micrometers Pages 43 63 External screw type micrometers accessories Pages 65
0280 / 0281 Vernier depth gauges
0280 / 0281 Vernier depth gauges Reading parts have a satin chrome finish 862 Low-set master scale Measuring rod with interchangeable pin High-precision laser graduation on the vernier and scale Cardboard
ПОСТАВЩИК: Компания ООО"ИНТЕХСЕРВИС" ,г.Москва,ул.Гурьянова,д.2,корп.2 тел./факс: 8(499) E mail:
Calipers B-1 E LECTRONIC C ALIPERS DIN 862 (Style 1A-ZS) 0,01 0.0005 in LCD, 7 Floating zero TESA CAL IP67 magna µ system Patented measuring system TESA magna µ system New electronic caliper The highest
Standard Scales SERIES 182 Made of Low-Expansion Glass. Working Standard Scales SERIES 182 E-32
Standard Scales SERIES 182 Made of Low-Expansion Glass High-precision glass scales manufactured under Mitutoyo s leading-edge Linear Scale production technology. High accuracy is guaranteed to be used
200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until
3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier
0230 / 0231 Workshop calipers with parallax-free reading
0230 / 0231 Workshop calipers with parallax-free reading Parallax-free reading Reading parts have a satin chrome finish Knife points for measuring range 500 mm: 20 mm Direct reading of internal and external
AutoCal Electronic Caliper
2016 REV. 0416 NEW! AutoCal Electronic Caliper Great for Garage and Shop Environments! Inch/Metric/Fraction reading:.0005"/.01mm/ 1/128" Dust, water and oil resistant to IP54 standards making it great
Small Tool Instruments and Data Management
Small Tool Instruments and Data Management Gauge Blocks Pages 302 311 Calibration instruments Pages 312 319 301 Basic information on gauge blocks Characteristics of Mitutoyo gauge blocks: Mitutoyo, at
Fred V. Fowler Company Inc. AUTO TOOL CRIB
Fred V. Fowler Company Inc. AUTO TOOL CRIB DISC BRAKE MEASUREMENT VERNIER DISC BRAKE MICROMETER Sharp black graduations on satin chrome finish Range: 0.3" 1.3" Graduation:.0001" Jaw depth: 3.5" Ratchet
NEW! AutoCal. Electronic Caliper
2015 REV. 0515 AutoCal Electronic Caliper NEW! Inch/Metric/Fraction reading:.0005"/.01mm/ 1/128" Dust, water and oil resistant to IP54 standards making it great for garage and shop environments Heavy Duty
Small Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
TESATAST Standard Models
TESATAST Standard Models 0110005 0,01 0, 2 0 0,4 0 12,53 0110006 0,01 0, 3 0 0,4 0 12,53 0110007 0,01 0,5 2 0 0,25 0 36,53 011000 0,01 0,5 3 0 0,25 0 36,53 0110009 0,002 0,2 2 0 100 0 12,53 0110010 0,002
Height Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
YOUR MITUTOYO PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
Check Points. for Measuring Instruments
Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement, there are many kinds of measuring instruments and their corresponding measuring
Fall Savings! HUGE SAVINGS!
Fall Savings! ROCKWELL HARDNESS TESTER PACKAGES Valid: From October 2nd to December 22nd 2018 Prices Subject to Change without Notice & Stock Availability. Some items may not be exactly as shown 13% Without
SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS
SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN
TESA IMICRO capa µ system with Digital Display
DIN 86 T4 (Style C1) 0,001 0.0005 in TESA IMICRO capa µ system with Digital Display A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. Metric/inch Conversion
t in Promotion Brochure Spring 2017 Partner for specialist retailers In Germany at home in demand worldwide valid until
ts n e l i-ta t l u M ion t c A in + al rigin Swiss tknif e o c ke artner for specialist retailers romotion Brochure Spring 17 In Germany at home in demand worldwide valid until 30.0.17 1 MUL T I -TA L
Dial and Electronic. Indicators Gauges
Dial and Electronic Indicators Gauges 37 AGD Group 2 2900 Electronic Indicators Innovative, Full Featured & Tough 2900 Electronic Indicators are available in a choice of configurations to meet a range
MARKALAMA CİHAZLARI. Çiziciler. Pergeller. Markalama Kumpasları. Markalama Kumpasları. Özel Markalama Kumpasları. Yükseklik ve Markalama Mihengirleri
MARKALAMA CİHAZLARI 2 3 5 7 10 14 Çiziciler Pergeller Markalama Kumpasları Markalama Kumpasları Özel Markalama Kumpasları Yükseklik ve Markalama Mihengirleri 0301 Precision dividers With a rivetted hinge
Gauge Blocks - Reference for Precision
ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance
Dial Gauges. Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability.
Features Dial Gauges Swiss style precision gear module design, accurate display, hardened aluminum alloy housing, assuring durability and reliability. Standard steel test tip Ø 3.175mm, hardened stainless
MITUTOYO'S 80 YEAR ANNIVERSARY PROMOTION
Action valid from 1st April to 31st May 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
Internal Measurement. Internal Measurement C-1
Internal Measurement Internal Measurement C-1 Internal Measurement Internal Measuring and Requirements Internal measuring of bores is more demanding than external measurement of workpieces. Not only the
LIGHTWEIGHT ADJUSTABLE SHALLOW DIAMETER GAGES
SERIES 77 For use at machine or inspection area for checking inside and outside diameters, shallow bores, counter bores, pitch diameters of gears, and many other dimensions. LIGHTWEIGHT ADJUSTABLE SHALLOW
Internal Measurement. D-1
www.tesatechnology.com D-1 THE CHALLENGES OF INTERNAL MEASUREMENT Bore measurement is more difficult than external measurement of components. Apart from the very tight tolerances specificied, all measuring
台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY
C1 C2 C3 Dial Gages (Small Bezel Dia) DG-9003S DG-9004S DG-9005S DG-9003S DG-9004S 0-3mm 0-4mm ψ40mm Aluminum Body ψ36mm Aluminum Body DG-9005S 0-5mm ψ40mm Aluminum Body Dial Gages (Normal) DG-9010A DG-9010R
Digimatic Indicators Pages Dial Indicators Pages Lever Indicators Pages Thickness Gauges Pages
Indicators Digimatic Indicators Pages 246-259 Dial Indicators Pages 260-294 Lever Indicators Pages 295-307 Thickness Gauges Pages 308-312 Indicator Depth Gauges Pages 313-315 Caliper Gauges Pages 316-322
Cal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm
Straightness, Angle and Inclination Measurement
Straightness, Angle and Inclination Measurement Straightness, Angle and Inclination Measurement H-1 Straightness, Angle and Inclination Measurement Levels with Natural Measuring Base Mechanical instruments
Multimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
Precision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown.
SPRING/SUMMER FLYER 2010 Precision Tools & Instruments Prices effective from May 1 - Aug 31, 2010 or while quantities last. Some items may not be exactly as shown. ABSOLUTE Coolant Proof Calipers SERIES
Catalog No. E Check Points. for Measuring Instruments
Catalog No. E12024 Check Points for Measuring Instruments Introduction Measurement the word can mean many things. In the case of length measurement there are many kinds of measuring instrument and corresponding
Q-Tech Engineering Services, S-134, C/o, Precision Engineering Works, MIDC, Bhosari, Pune, Maharashtra
Last Amended on 24.05.2015 Page 1 of 5 I. DIMENSION 1. EXTERNAL MICROMETER $ L.C. 1 µm Φ >100 mm to 300 mm 1.4 µm 3.0 µm Using Slip Gauge Blocks Gr '0' / Long Slip Gauges, by Comparison 2. DEPTH MICROMETER
Caliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 10 I. DIMENSION (Basic Measuring, Gauge etc.) 1. PLAIN PLUG / WIDTH/ DEPTH/ Upto 100 mm 1.9 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ 100 mm to 300 mm 3.8
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Versatile ID measuring gages for holes diameters, groove thickness, tube thickness, and hard-to-reach dimensions. The Digimatic Caliper
Over 2 mm and. less than 10mm. 1/10 revolution /2 revolution ±9 ±5 ±6 ±3 ±5 ±6. One revolutions ±10 ±6 ±7 ±4 ±6 ±7
G1 Scale interval 0.01mm 0.002mm 0.001mm Measuring range 10mm max. 2mm max. Over 2 mm and less than 10mm 1mm max Over 1 mm and less than 2mm Over 2 mm and less than 5mm Retrace error 5 3 4 3 3 4 Repeatability
Technical Data for Metric Thickness Gauges Page Model Reading Range Depth of jaw Lifting Contact points Contact points
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 134 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 134
Lever Type Dial Indicators Dial Test Indicators
Lever Type Indicators Test Indicators Small Tool Instruments and Data Management Catalog No.E12035 Drastically Enhanced Durability, Sensitivity and Visibility Lever Type Indicator Test Indicator Crystal
METROLOGY In Germany at home in demand worldwide.
METROLOGY 2015 In Germany at home in demand worldwide www.helios-preisser.de METROLOGY 2015 In Germany at home in demand worldwide Dear HELIOS-PREISSER Customer, One company, one team, many new aspects,
DIAL SNAP GAUGE. dial indicator is not included W. optional indicators
DIAL SNAP GAUGE dial indicator is not included 36 A 2 215-25W anvil Ø15 B 11 anvil 14 For quick Go/No-Go judgment of diameter of cylinders and shafts Anvil retracting stroke: 3mm Measuring force: 6-9N
PRECISION TOOL SALE SPRING 2018
PRECISION TOOL SALE SPRING 2018 Effective April 2nd - June 29th 2018 While quantities last. Some items may not be exactly as shown. FOLLOW US. LIKE US Distributed By: 2 Outside Micrometers Outside Micrometers
TESA Clearance Sale TESA CAL IP67 DIGITAL CALIPERS (METRIC ONLY) DIGITAL LIGHT CALIPERS DIGITAL DEPTH LIGHT CALIPERS ETALON DIAL CALIPERS
CLEARANCE SALE TESA Sale Validité: 31.10.2016 ou épuisement des stocks Gültig bis 31.10.2016 oder solange der Vorrat reicht Validity: 31.10.2016 or while stock lasts TESA CAL IP67 DIGITAL CALIPERS (METRIC
Your partner for highest precision. distributed by Tel
Your partner for highest precision. Käfer Messuhrenfabrik since 1932 The specialist in Dial Gauges We offer a broad manufacturing programme of more than 1000 standard versions of Dial Gauges Dial Test
Lever Type Dial Indicators Dial Test Indicators
Lever Type Indicators Test Indicators Small Tool Instruments and Data Management Catalog No.E12035(2) Drastically Enhanced Durability, Sensitivity and Visibility Lever Type Indicator Test Indicator Crystal
COMPAC Dial Test Indicators
DIN 2270 and factory standard Rotating dial COMPAC Dial Test Indicators Essential for the workshop, but also in the inspection room or measuring laboratory Ideal for comparative measurement on a surface
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
Thickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
ISO/IEC ACCREDITED CALIBRATION LABORATORY
My history with Indicator Calibrators Cornerstone Metrology Service Inc. was established in 1983 and our first indicator calibrator was made by Federal. It has a 0-1 standard mic head with a approx. 4
Crossed Roller Bearing Positioners
rossed Roller earing Positioners Parker Daedal precision crossed roller stages provide controlled, precise point-to-point positioning along a linear axis. Stages are comprised of two basic components:
New. Swiss Promo. Shop Proof Technology. TESA-HITE Magna 400 and TESA-Cal. Validity : All prices with VAT excluded
Validity : 31.07.2007 All prices with VAT excluded Swiss Promo TESA-HITE Magna 400 and 700 2 Shop-Proof Technology protected against water oil dust New Shop Proof Technology TESA-Cal IP67 6 1730 2190 108
L éditorial. Robert Renaud
L éditorial Dear Customer, This first part of our flyer is usually reserved to our President, Mr. Christophe Bevillard but, exceptionally, I would like to address this editorial and furthermore introduce
OPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION
OPPORTUNITY FOR PRECISION: THE MITUTOYO SPRING PROMOTION FROM APRIL 1 THROUGH MAY 31, 2015 GENERAL PRE1316 U-WAVE Measurement Data Wireless Counication System Counication distance approx. 20 m Software
Dial Indicator. SERIES 2 Standard Type, 0.01mm Resolution
Dial Indicator SERIES 2 Standard Type, 0.01mm Resolution Series 2 dial indicators are Mitutoyo s most popular, and have the widest application. Standard 0.01mm graduation dial gauges having a bezel with
Dial Test Indicators Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Dial Test s Comparison measuring instruments which ensure high quality, high accuracy and reliability. SERIES 513 ever-type Dial s eature icons Designed to probe surfaces that cannot be reached with a
Digimar 816 CL. Versatile. User-friendly operation... The measuring program... Precise measuring results...
- 2-8 Digimar 816 CL The new Height Measuring Instrument Digimar 816 CL. You want to obtain highly accurate measurement results without any complicated procedures? With the Digimar 816 CL you have the
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
DOUBLE SQUARE SERIES 234: Ideal for precision layout work. Blades are hardened and tempered with a satin-chrome finish. COMBINATION SQUARE SET - 4 PIECE SERIES 233: Size of 4 4R 1610004 4 16R 1610014 4
Dial Test Indicators SERIES 513
Dial Test s SERIES 513 Description of Icon Icon Description With revolution counter Long contact point Jeweled bearing Double scale spacing, easy to read Compact Dustproof Anti-magnetic FEATURES Narrow
TRI-STATE INSTRUMENT SVC, INC
CALIBRATION RATE POLICY AND PRICING 2017 Typically, compliance with ISO-900x and TS 16949 specifications require LONG FORM calibration reports in the following formats. Format #1 -- Before Adjustment or
ABS System. Inductive Digital Comparator µmaxµm. Features. Technical Data. The most valueable electronic indicator for high production measurements.
+ Millimess. Digital Comparators 6- Inductive Digital Comparator µmaxµm ABS System 0 TOL RS232C Digimatic The most valueable electronic indicator for high production measurements. Inch/Metric operator
Lever-Type Dial Indicators SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT DIAL TEST INDICATORS. Bulletin No. 2232
Lever-Type Indicators DIAL TEST INDICATORS SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT Bulletin No. 2232 Enhanced Durability, Sensitivity and Readability Inspection The QR code is used by the factory to
1360 DIGI-MET Depth gauges
360 DIGI-MET Depth gauges 862 Protection class IP67 862 Straight measuring rod RS 232 + Digimatic + USB mm inch mm inch mm inch 50 6 00 4 0.0.005 360 76 304.00 200 8 00 4 0.0.0005 360 78 345.00 300 2 50
2 HEXAGON MANUFACTURING INTELLIGENCE HexagonMI.com
GLOBAL S DATA SHEET 2 HEXAGON MANUFACTURING INTELLIGENCE HexagonMI.com GLOBAL S The Coordinate Measuring Machine that Pushes Productivity Further The GLOBAL S coordinate measuring machine (CMM) series
Institute for Design of Electrical Measuring Instruments, Swatantryaveer Tatya Tope Marg, Chunabhatti, Sion, Mumbai, Maharashtra
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1 Calipers $ Up to 600 mm 10.4 µm Using Caliper Checker by Up to 1000 mm 13.2 µm Using Long Slip Gauge by 2 Height Gauges $ Up to 600 mm 12.8 µm Using
Ball Bearing Positioners miniature and standard
all earing Positioners miniature and standard Parker Daedal precision linear stages provide controlled, precise pointto-point positioning along a linear axis. Stages are comprised of two basic components:
Thickness Gages SERIES 547, 7
Technical ata Function of igital Models IS Types ON/OFF / mm onversion Origin ±irection hangeover SP Output attery Life: 20,000 hrs Power Supply: Silver Oxide ell (SR-44 1pc.) I Types ON/OFF / mm onversion
Test Indicators. Dial Test Indicators MEASURING TOOLS & INSPECTION INSTRUMENTS. Dial Test Indicators. Long Range Dial Test Indicators. Inch.
Meets DIN2270 or BS2795 standard Satin chrome finish, brass body, anti-magnetic Jeweled bearing, shock-proof Interchangeable carbide contact point, 0.0787 /2mm diameter ball, supplied with wrench Probe
Alcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
Accurate Labs, 311, 312 Govinda Complex, GIDC Char Rasta, Vapi, Valsad, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 9 I. DIMENSION 1. CALIPER $ Vernier L.C. 0.01mm 7.5 µm 9.0 µm Using Caliper Checker & Slip Gauges L.C. 0.05mm 29.5 µm 30.0 µm Dial / Electronic L.C. 0.02mm 12.5 µm 13.5 µm 2.
Discipline Mechanical Calibration Issue Date Certificate Number C-0752 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I DIMENSION 1. Caliper $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 0 to 1000 mm 12.2 µm 13.3 µm Using Caliper Checker, Slip Gauge Block & 2. Depth Caliper $ (Vernier/Dial/Digital)
QA Tech (A Division of GMP Technical Solutions Pvt. Ltd.), L-73, Verna Industrial Estate, Verna Salcette, Goa
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10µm Φ 0 to 300 mm 13 µm Using Caliper Checker; & T.C. Gauge Block Set by Comparison L.C. :- 20µm 0 to 1000 mm 22 µm Using Caliper Checker;
Rev /07/2015 CATALOGUE - CALIBRATION SERVICES 1
Rev. 02 07/07/2015 CATALOGUE - CALIBRATION SERVICES 1 OVER 100 ITEMS We are proud to present to you our new catalogue for 2015. In the following pages we present more than 100 instrument types, which we
Measurement & Calibration
Measurement & Calibration MIC TRAC 4000 In-House Precision Gage Calibration System Inspect Parts, Calibrate, and Track Gages Step 1: Find what type of gages you have. Gages & Indicators for Calibration
Electronic Length Measuring Equipment
Electronic Length Measuring Equipment N-1 TESA LENGTH MEASURING EQUIPMENT WITH INDUCTIVE PROBES TESA offers a complete family of value sensors (electronic probes) as well as dedicated measuring instruments
Instructions for checking caliper gauges of the series Int/Odi and ID/OD - absolute measurement
Instructions for checking caliper gauges of the series Int/Odi and ID/OD - absolute measurement 1 Generalties This instruction follows the checking instructions for caliper gauges according to VDI/VDE/DGQ
Accurate Measurements, Plot No.103, D Block, Meethapur Ext., Badarpur, New Delhi. Discipline Mechanical Calibration Issue Date
Last Amended on 11.11.2014 Page 1 of 6 I. DIMENSION 1. Dial/ Digital Vernier Caliper $ L.C.: 0.01mm Φ 0 to 200 mm 7.5 µm Using Slip Gauge Set & L.C.: 0.01mm Φ 0 to 300 mm 12.17 µm Using Slip Gauges & Caliper
M Series 010.D Data Sheet. Analog Meters with Moving-Coil Movement, 90 Dial PSQ 48 PQ 72 RS PQ 96 RS PQ 144 RS
Data Sheet M Series 010.D.101.11 Analog Meters with Moving-Coil Movement, 90 Dial PSQ 48 PQ 72 RS PQ 96 RS PQ 144 RS Application The moving - coil panel meters PSQ 48 in a housing of moulded thermoplastic
Lever Type Dial Indicators Dial Test Indicators SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT
Lever Type Indicators Test Indicators SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT Drastically Enhanced Durability, Sensitivity and Visibility Lever Type Indicator Test Indicator Crystal for readability
Department of Mechanical Engineering ME6513 - METROLOGY AND MEASUREMENT LAB LABORATORY MANUAL Name Register No. Branch Year & Semester : : : : 1 CONTENTS S.NO. DATE EXPERIMENT NAME PAGE NO. 1 Calibration
Beamex MB METROLOGY TEMPERATURE BLOCK. Portable temperature dry block delivering bath-level accuracy for industrial applications
Beamex MB METROLOGY TEMPERATURE BLOCK 87 Portable temperature dry block delivering bath-level accuracy for industrial applications Highly accurate temperature dry block 88 Portable temperature dry block
Torque Wrenches
- 171 - Digital Torque Wrenches Digital Torque Wrenches The new AmPro digital torque wrenches are designed for simple and precise measurement of industrial, automotive, aerospace and many other applications.
4-14ET Line Boring Machine And Accessories Catalogue
4-14ET Line Boring Machine And Accessories Catalogue Portable - Powerful - Flexible - Easy to Use 1 4-14ET Line Boring Machine The York 4-14ET (electric touch) portable line boring machine is our finest
THE PRODUCTION COMPARATOR STAND
845-454-3111 800-549-4243 THE PRODUCTION COMPARATOR STAND The Dorsey E1 comparator stand is specially designed for use in production and shop areas. The comparator stand has a large base and 3" throat
STANDARD RETOOLABLE GAUGES. Countersink Depth. ID Measuring. Measuring. Wired with integral cycle button. Wireless
STANDARD RETOOLABLE GAUGES ID Measuring Countersink Depth Measuring Wireless Wired with integral cycle button ID Measuring All retoolable by replacing the nosepiece All retoolable by replacing the either
BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing
BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing Cost Effective, High Performance Vertical Machining Centers BARON-MAX V Range
Price List. Calibration Fee
3/4-5 Moo 3, Klong 5, Klong Luang, Pathumthani, 110, Thailand Tel. +66 577 5100 (Please contact : Customer Service Section Ext. 3101, 310) Fax. +66 577 3659 E-mail : cs@nimt.or.th Website : http://www.nimt.or.th
Bore Gage. Inside Diameter Measurement. Small Tool Instruments and Data Management
Small Tool Instruments and Data Management Inside Diameter Measurement Bore Gage Bulletin No. 2005 NEW Best-selling range of bore gages now offers better accuracy, user-friendliness and durability Bore
LINEAR SLIDES RECISION NDUSTRIAL OMPONENTS DESIGN. Phone: FAX:
R RECISION NDUSTRIAL OMPONENTS R LINEAR SLIDES 2. 4. 3. 1. Ball Slides 2. X, X-Y, X-Y-Z Positioners with Micrometers 3. Rails 4. Crossed Roller Slides 1. 2-1 TECHNICAL SECTION Typical coefficient of friction
UNIVERSITI KUALA LUMPUR Malaysian Institute of Marine Engineering Technology (MIMET)
Page Page 1 of 7 1 Dial Indicating Bore Gauges (18-35mm) 1 Set a) Suitable for rapid, accurate measurement of size, concentricity, wear, taper, etc., in a wide range of bores. b) For workshop and inspection
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service ccredited to Division of Cromwell Tools Ltd Services Block 65 Chartwell Drive Wigston Leicester LE18 2FS Contact: Mr T still Tel: +44 (0)116-2572396
Autocal Solutions Pvt. Ltd., Plot No. BG-74, Gala No. 1 & 2, Jai Tulja Bhavani Indl. Premises, Telco Road, MIDC Bhosari, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER (Vernier/Dial/Digital) L. C. : 10µm Φ 0 to 600 mm 16 µm Using Caliper Checker & External Micrometer by 2. DEPTH GAUGE (Vernier/Dial/ Digital) L. C.
Unit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.
Trade: Fitter Unit: 1+1+1 (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI. S.NO FITTER TOOL KIT QTY Rate/Item Amount 1 Rule
Calitron Calibration Laboratory, U1: 207, Kohinoor Arcade, Tilak Chowk, Nigdi, Pune, Maharashtra
Last Amended on 12.09.2014 Page 1 of 7 I. MASS 1. Weights $ (Conventional Mass) 1 mg 0.015 mg Using Weights of 2 mg 0.015 mg accuracy Class F1 and 5 mg 0.015 mg 10 mg 0.015 mg 20 mg 0.020 mg 50 mg 0.020
Precision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
testing and measuring instruments for vehicle wheels
testing and measuring instruments for vehicle wheels en testing and measuring instruments for vehicle wheels For more than 20 years MAKRA has been manufacturing measuring and testing equipment for the
M Series 140.D Data Sheet. Two-Point Controller with Moving-Iron or Moving-Coil Movement 90 Dial RW 96 RP 96
Data Sheet M Series 140.D.101.06 RW 96 RP 96 Two-Point Controller with Moving-Iron or Moving-Coil Movement 90 Dial Application The two point controllers RW/RP 96 (M series) with one or two setpoints provide
Rotary Positioning Stages Introduction
Introduction Features Aluminum/steel construction Protective black anodize finish Low-friction rotary adjustment Precise/accurate movement Trouble-free operation aedal precision rotary stages are utilized