MINING & DRILLING PRODUCTS. N2U Core Retrieval System
|
|
- Tamsin Riley
- 5 years ago
- Views:
Transcription
1 MINING & DRILLING PRODUCTS NU Core Retrieval System
2 CORE BARREL ASSEMBLY, NU Core Barrel Assembly, 0 ft (.0 m)* Core Barrel Assembly, ft (. m)* Inner Tube Assembly, 0 ft (.0 m)* Inner Tube Assembly, ft (. m)* 0 Locking Coupling, Conventional, Tang 007 Drive Coupling 000 Landing Ring* A - 00 Outer Tube, 0 ft (.0 m) B - 00 Outer Tube, ft (. m) 00 Inner Tube Stabilizer* 009 Head Assembly* 7A Inner Tube, 0 ft (.0 m)* 7B - 00 Inner Tube, ft (. m)* 00 Stop Ring* 9 00 Core Lifter, Slotted* Core Lifter Case* Note: Items with * are exclusive to the NU Wireline System. All other items are common between NU & NU. Please refer to the NU Core Barrel Options and Kits page for alternatives to the standard NU Core Barrel components. A B 7A 7B 9 0 Caution Danger of Impalement
3 CORE BARREL OPTIONS AND KITS, NU Item Part No Description 007 Locking Coupling, Full-Hole, No Tang 00 Landing Indicator, Bushing, No OD Groove 00 Shut-Off Valve, Soft 09 Solid Spindle Spacer 00 Core Lifter, Fluted 00 Core Lifter, Slotted, Diamond Coated Core Lifter, Fluted, Diamond Coated 00 Core Lifter, Smooth Graphite Core Barrel Plug 0 00 Gauge Assembly, Bit & Shell 0070 Outer Tube, Chrome Plated, 0 ft (.0 m) (not shown) Outer Tube, Chrome Plated, ft (. m) (not shown) 0 Inner Tube, Chrome Plated, 0 ft (.0 m) (not shown) 0 Inner Tube, Chrome Plates, ft (. m) (not shown) 0 Parts Pouch (not shown) 0007 Fluid Retention Kit (not shown) 7 0 Quick Coupler, # NPT Female (not shown) Note: See separate flyer pages for 00 Gauge Assembly Bit & Shell N and 0007 Fluid Retention Kit NHP
4 HEAD ASSEMBLY, NU Head Assembly, NU 00 Spearhead Point 007 Spearhead Spring 00 Detent Plunger 00 Spearhead Pin 0079 Spearhead Base 0079 Latch Locking Spring Latch Locking Pin 009 Latch Retracting Pin Latch Retracting Case Latch Case Retracting Pin 000 Latch Body, Upper 00 Latch Pivot Pin 000 Latch Spring 000 Latch 007 Spring Seat 000 Latch Case Spring 7 00 Latch Case Spring Sleeve 00 Spring Cavity Bushing Latch Body Adaptor Pump-In Seal 7000 Latch Body Seal Seat 00 Stainless Steel Ball 00 Landing Indicator Bushing, OD Groove 009 Landing Shoulder* 0070 Latch Body, Lower 00 Nord-Lock Washer 7 00 Lock Nut 007 Spindle 9 00 Shut-Off Valve 0 00 Shut-Off Washer 007 Spindle Bearing, Upper 007 Spindle Bushing 00 Spindle Bearing, Lower 009 Compression Spring 000 Self Locking Nut 007 Inner Tube Cap Assembly* Note: Items with * are exclusive to the NU Wireline System. All other items are common between NU & NU systems. Please refer to the NU Core Barrel Options and Kits page for alternatives to the standard NU Head Assembly components. Caution Danger of Impalement
5 INNER TUBE CAP ASSEMBLY, N Inner Tube Cap Assembly, N 00 Inner Tube Cap Body 00 Grease Fitting 00 Stainless Steel Ball 007 Check Valve Body
6 LOADING CHAMBER ASSEMBLY, NU Loading Chamber Assembly, NU 0090 Packing Plug 009 Cable Guide Washer 009 Cable Packing 009 Quick Coupler 009 Loading Chamber Body Note: Apply thread seal tape (or similar thread sealing compound) to Quick Coupler () prior to threading in to Loading Chamber Body ().
7 OVERSHOT ASSEMBLY, NU Overshot Assembly, NU 00 Cable Swivel Eye Bolt 009 Cable Swivel Collar 000 Thrust Bearing 00 Castle Nut 00 Cotter Pin 00 Grease Fitting 7 00 Cable Swivel Body 00 Shear Pin Upper Body Pump-In Seal 000 Latch Body Seal Seat 00 Stainless Steel Ball 00 Landing Indicator Bushing, OD Groove 009 Overshot Head Body 009 Compression Spring 000 Pivot Pin 7 00 Sway Pin 000 Lifting Dog Note: The NU Overshot Assembly is used with both the NU Core Barrel Head Assembly (0079) and NU Core Barrel Head Assembly (009). 7
8 SPARE PARTS KITS, NU Spare Parts Kit, Overshot Assembly, NU 000 Thrust Bearing 00 Castle Nut 00 Cotter Pin 00 Grease Fitting 00 Shear Pin 007 Pump-In Seal 7 00 Landing Indicator Bushing, OD Groove 009 Compression Spring Pivot Pin 0 00 Sway Pin 000 Lifting Dog 7 9 0
9 WATER SWIVEL ASSEMBLY Water Swivel Assembly, Compact Plus, Top Port 0 Swivel Cap, Top Port 0 Wavy Washer 0 O-Ring, Upper 0 Swivel Packing Set 07 Wear Sleeve, Slotted 0 Packing Cage 7 09 Ball Bearing 00 Swivel Body, Upper 9 0 O-Ring, Lower 0 0 Spindle 0 Thrust Bearing 0 Swivel Body, Lower 00 Grease Fitting 0 Felt Seal Note: # NPT Hose Connection on Swivel Cap, Top Port (). AW Rod Box Connection on Spindle (0). Can also be used with drilling muds. Field serviceable
10 SPARES KIT, WATER SWIVEL Spares Kit, Water Swivel, Compact Plus 0 Wavy Washer 0 O-Ring, Upper 0 Swivel Packing Set 07 Wear Sleeve, Slotted 09 Ball Bearing 0 O-Ring, Lower 7 0 Thrust Bearing 0 Felt Seal 7
11 GAUGE ASSEMBLY, BIT AND SHELL, N Gauge Assembly, Bit and Shell, N 0 Gauge - Max. New Shell 07 Gauge - Min. New Shell 0 Gauge - Max. New Bit / Worn Shell 09 Gauge - Min. New Bit 0 Hex Bolt 09 Flat Washer 7 00 Lock Nut Note: This gauge assembly is used to verify N, N, N, and NTW Bit and Shell OD. 7
12 GAUGE ASSEMBLY, ROD OD, N Gauge Assembly, Rod OD, N 09 Gauge, Rod OD, New 09 Gauge, Rod OD, Wear 00 Self Locking Nut 00 Flat Washer 00 Hex Bolt Wear Sample, OD Note: Item# is not part of 007 Gauge Assembly
13 WRENCH ASSEMBLY, N INNER TUBE Wrench Assembly, N Inner Tube 0097 Wrench Handle 009 Stationary Jaw 0099 Swing Jaw 0709 Pin / Retracting Ring Assembly
MINING & DRILLING PRODUCTS. B Core Retrieval System
MINING & DRILLING PRODUCTS B Core Retrieval System CORE BARREL ASSEMBLY, B -0-00 Core Barrel Assembly, 0 ft (.0 m) -0-00 Core Barrel Assembly, ft (. m) -0-00 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner
More informationH Core Retrieval System
H Core Retrieval System Global Drilling Products Pte Ltd 9 Loyang Way, #0-0, Changi Logistics Centre Singapore 0 Telephone: + 9 info@globaldrillingproducts.com www.globaldrillingproducts.com Core Barrel
More informationMINING & DRILLING PRODUCTS. N3 Core Retrieval System
MINING & DRILLING PRODUCTS N Core Retrieval System CORE BARREL ASSEMBLY, N - - 090 Core Barrel Assembly, 0 ft (.0 m) - - 09 Core Barrel Assembly, ft (. m) - - 09 Inner Tube Assembly, 0 ft (.0 m) - - 09
More informationMINING & DRILLING PRODUCTS. P Core Retrieval System
MINING & DRILLING PRODUCTS P Core Retrieval System CORE BARREL ASSEMBLY, P -0-0 Core Barrel Assembly, 0 ft (.0 m) -0-0 Core Barrel Assembly, ft (. m) -0-0 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner Tube
More informationOvershots. Drill Rods. Casing. Tools 12/06-MKT1644 P/N M
REV 0-DEC-06 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Diamond Products Impregnated Bits Reaming
More informationTABLE OF CONTENTs DIAMOND TOOLS DOWN THE HOLE PUMPS DRILLING ADDITIVES & LUBRICANTS SURVEY SYSTEMS ACCESSORIES GEOTECHNICAL EQUIPMENT
TABLE OF CONTENTs DIAMOND TOOLS DOWN THE HOLE DRILL rigs PUMPS DRILLING ADDITIVES & LUBRICANTS SURVEY SYSTEMS Denver, Colorado, United States, 2008 Jeff Deel ACCESSORIES GEOTECHNICAL EQUIPMENT WWW.FORDIA.COM
More informationOvershots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
More informationOvershots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
More informationOvershots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
More informationContinuous Sampling OVERSHOT STYLE ROD STYLE SWIVEL OVERSHOT ASSEMBLY CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY
ROD STYLE OVERSHOT STYLE OVERSHOT ASSEMBLY SWIVEL CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY SAMPLE BARREL SPLIT OR SOLID SHOE Split Barrel Sampler Assemblies Continuous
More informationDrill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated Bits
More informationSoil Investigation Tools Catalogue
Soil Investigation Tools Catalogue 2012 KUVAWALA CORE DRILL EQPT. PVT. LTD. QUALITY RUNS DEEP www.kuvawalacoredrill.com INDEX TUNGSTEN CARBIDE BITS DRILL RODS SOIL SAMPLING CORE BARRELS SPLIT TUBE SAMPLER
More informationIntroduction Augers. Inclinometer Casing. Subs & Pipe Wrenches. Samplers. Hoisting, Lowering, Hammers & Rockbits. Corebarrels, Drill Rods & Casings
Contents Introduction Augers Inclinometer Casing Subs & Pipe Wrenches Samplers Hoisting, Lowering, Hammers & Rockbits Corebarrels, Drill Rods & Casings Diamond Products Thin Wall Bits & Saw Blades Water
More informationMOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES
MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES Prepared for the University of Texas by Pettigrew Engineering, PLLC Tom Pettigrew, PE President Revision: 5 15 October
More informationN&N Drilling Supply Mfr. (800)
W FLUSH JOINT CASING Casing Description Length Part# Weight (Lb) AW 1 12-AWFJC-1 4 AW 2 12-AWFJC-2 7 AW 3 12-AWFJC-3 11 AW 5 12-AWFJC-5 19 AW 10 12-AWFJC-10 37 BW 1 12-BWFJC-1 7 BW 2 12-BWFJC-2 15 BW 3
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
More informationCONTINUOUS FLIGHT AUGERS AND BITS
CONTINUOUS FLIGHT AUGERS AND BITS Hex-Tube Augers Available in Hole Sizes 2½ (6 mm) through 12 (05 mm) Hex Sized 1 / 16, 1 1 / 8, 1 5 / 8 and 2 (20.6 mm, 29 mm, 1 mm and 50.8 mm) Field replacement shank
More informationPART # DESCRIPTION OIL HOUSINGS PUMP RETROKIT FOR AMADA STYLE OILER (NO STATION) PUMP RETROKIT FOR FINN-POWER STYLE OILER (NO
PART # DESCRIPTION OIL HOUSINGS 11-00069 PUMP RETROKIT FOR AMADA STYLE OILER (NO STATION) 11-00070 PUMP RETROKIT FOR FINN-POWER STYLE OILER (NO STATION) PITCH INSERTS 10-10010 PITCH INSERT #24 10-10012
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More informationFull Flow Reverse Circulation Junk Baskets. Manual B320
Full Flow Reverse Circulation Junk Baskets Manual B320 CONTENTS Logan Full Flow Reverse Circulation Junk Basket Overview... 2 Uses... 2 Construction... 2 Tool Illustration... 3 Operation... 4 Recovering
More information1988 Chevrolet Pickup V SUSPENSION - FRONT (4WD)' 'Front Suspension - "V" Series 1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series
1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series DESCRIPTION NOTE: Vehicle serial numbers used in this article has been abbreviated for common reference to Chevrolet and GMC models. Chevrolet
More information1822-I/1822-IC. Spindle Assembly. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* *
-I/-IC Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support () Pivot Rod () 0 Shoulder Screw
More informationMaintenance Information
16606022 Edition 3 May 2014 Air Drill 728 Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these potentially
More informationPneumatic Axial Die Grinder also for Underwater Use Type , 0050
M a s c h i n e n f a b r i k G m b H Pneumatic Axial Die Grinder also for Underwater Use Type 1 5077 0010 0020, 0050 Illustration can differ from the original Repair Manual and Compiled: 18.07.11 150770010_0020_0050_Inst_en_Version_00
More informationSmith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List
Issue/Rev. 0.0 (1/14) Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List Bulletin PO01023 *For meters which began shipping in 1993 to current. For meters shipped prior to
More informationCP-1, CP-2, CP-2L & CPD-2 Series Overhaul
Replacement of Mechanical Seals for CM, CMU, CS and CSU Series Pumps Installation Instructions Form No. F-1031 Section 5013 Issue Date 03/01/85 Rev. Date 02/08/11 CP-1, CP-2, CP-2L & CPD-2 Series Overhaul
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
More informationModel 900 Walk Behind Edger
Little Wonder Model 900 Walk Behind Edger OPERATOR S MANUAL Manual Includes: Safety Information Operating Instructions Maintenance Schedule Tips For Better Operation Illustrated Parts Breakdown Please
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
PARTS LIST FOR NO. SERIES AM ANGLE TOOLS Form ZA Date 0March/F Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM).
More informationFX90 Skidding Winch Parts Manual S/N and After
Z9056 FX90 Skidding Winch Parts Manual S/N 5906 and After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and
More informationMODEL EF Full Circle Tire Spreader
MODEL EF Full Circle Tire Spreader Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV. 062917 P/N: 81-0050C CAUTION
More informationGear Products Inc N. 161st E. Ave. Tulsa, OK Phone (918) Fax (918)
SERVICE MANUAL Disassembly & Assembly Procedures Worm Gear Swing Drive 003 Series Gear Products Inc. 1111 N. 161st E. Ave. Tulsa, OK 74116 Phone (918) 234-3044 Fax (918) 234-3455 Worm Gear Swing Drive
More informationFX140 & FX140R Skidding Winch Parts Manual
EMB Manufacturing Inc. 4144 Boomer Line St. Clements, On N0B 2M0 Canada Ph: (519) 699-9283 Fax: (519) 699-4146 www.wallensteinequipment.com FX140 & FX140R Skidding Winch Parts Manual S/N 514094 & After
More informationRetriever 5100G/P. 11/89 revised 10/02 FORM NO
Retriever 5100G/P PARTS LIST Advance MODELS 56497000, 56497010 This parts list is for machines after serial number 353005 All models covered in this manual are OBSOLETE 11/89 revised 10/02 FORM NO. 56042216
More information3M Overhaul Service Kit
SERVICE INSTRUCTIONS FOR 3M 12,000 RPM 5 in. (127 mm) and 6 in. (150 mm) RANDOM ORBITAL SANDERS 3M Overhaul Service Kit The part number 20347, 3M Overhaul Service Kit, contains all the replacement parts
More information1 HR-301/D Parts Manual. Table Of Contents
Table Of Contents 301/D Parts Manual 3 Point Hitch...2 Pull-Type Hitch...4 Main Frame...6 Angle Adjuster - Serial Number 44982 & Prior...8 Rotor Assembly - Serial Number 44982 & Prior...10 Rotor Assembly
More informationC SERIES WIRELINE CORING SYSTEM WUXI DRILLING TOOLS FACTORY. Introduce to C series core barrels
C SERIES WIRELINE CORING SYSTEM WUXI DRILLING TOOLS FACTORY Introduce to C series core barrels C-series wireline core barrel designed by WUXI DRILLING TOOLS FACTORY,JINSANJIAO(short for JSJ) is our brand,introduces
More informationIllustrated Parts Manual
Illustrated Parts Manual Transmatic Lawn Tractor MODELS 70, 770 7, 77 7, 77 7, 77 MTD LLC, P.O. BOX CLEVELAND, OHIO -7 PRINTED IN U.S.A. FORM 7-0 (//00) Models 70 & 770 A 7 0 8 0 8 7 8 A 0 Models 70 &
More informationINSTALLATION GUIDE Bolt-On Drag-Race Strut Clip Chevy II
INSTALLATION GUIDE 7702 Bolt-On Drag-Race Strut Clip 1962-67 Chevy II Description: STRUT CLIP 4130 BOLT ON 62-67 CHEVY II, INCLUDES 4130 ROUND TUBE FRAME CLIP, DOUBLE-ADJUSTABLE STRUTS, ADJUSTABLE-HEIGHT
More informationSide Feeds * 6RG * 12RG * 20RG * 4.5PE * 5.0PE * 30RG * 7RG * 8.0PE * 13RG * 5.7PE * 4.5RG * 8K * 9.7PE
Prices Effective May 15, 2008 * 6RG * 30RG * 8.0PE * 8K * 9.7PE Side Feeds * 12RG * 4.5PE * 7RG * 4.5RG * 20RG * 5.0PE * 13RG * 5.7PE 7015 Old Hwy 105 W. Conroe, TX 77304 Office (936) 588-3033 Fax (936)
More informationStep 4 Press the sleeve gear assembly through the center of the bearing plate assembly so that the gear and bearing are in contact.
Rotational Center (ip-3009_page) : DATE: 0//207 QTY Parts Needed On This Page Tools Needed On This Page AM-303 40T Steer Gear, plated Arbor Press AM-0253 /2" ID, /2" Long Bushing 5/32 Allen Wrench AM-002
More informationILLUSTRATED PARTS MANUAL
ILLUSTRATED PARTS MANUAL Transmatic Lawn Tractor Models 760-779 IMPORTANT READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION Warning: This unit is equipped with an internal combustion engine
More informationFX65 Skidding Winch Parts Manual S/N & After
Z906 FX6 Skidding Winch Parts Manual S/N 678 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing
More informationPart s Catalog. LX500 Lawn Tractor. Model No. 13AP60RP744. Original Instructions (EN) (01/31/06)
Part s Catalog For Parts Call 0-- or 0-- LX00 Lawn Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) For Parts Call 0-- or 0-- Model P0RP NUMBER --00 Turf Tire, 0 x 0.0 x -000-00 Rim,.0 x.0-0-0
More informationDrop-In Inside Blowout Preventer Valve
Drop-In Inside Blowout Preventer Valve Disassembly and Assembly Procedures Global Manufacturing, Inc. Lafayette, Louisiana USA 70508 Ph (337) 237-1727 Fax (337) 232-9353 Disassembly and Assembly Procedures
More informationForm 7-53, 11-15c Supersedes Form 7-53, 03-13c Sheet 1 of , Swing Air Jack Hunter Engineering Company
Form 7-53, 11-15c Sheet 1 of 8 133-84-1, 133-85-1 Swing Air Jack 2013-2016 Hunter Engineering Company 133-84-1, 133-85-1 Swing Air Jack REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING Form 7-53, 11-15c
More informationEdition 7 February QA4 Air Angle Wrench and Nut Runner. Parts Information. Save These Instructions
80603 Edition 7 February 0 QA Air Angle Wrench and Nut Runner Parts Information Save These Instructions Module - Exploded View 8 7 5 6 8 3 0 9 9 5 0 5 53 5 7 55 3 0 56 57 6 7 5 3 33 3 8 9 6 63 6 65 66
More information1984 Dodge W250 PICKUP
1984 Dodge W250 PICKUP Submodel: Engine Type: V8 Liters: 5.2 Fuel Delivery: CARB Fuel: GAS Dana 44 MODELS THROUGH 1984 2. Raise and safely support the vehicle, then remove the wheel hub and bearings as
More informationSERVICE PARTS LIST. SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 Sawzall STARTING SERIAL NO.
Pull both Brush Tubes (25) back before removing or installing the Armature (2) to prevent damage to the commutator. Brush Tube SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
More informationOPERATING INSTRUCTIONS AND SERVICE MANUAL
OPERATING INSTRUCTIONS AND SERVICE MANUAL 55NAL--270-4 55NL--724-4 55RNL-2-LS-4- COMPLETE TOOL MODEL NO. CODE NO. 55NAL--270-4 20270 55NL--724-4 220724 READ SAFETY RECOMMENDATIONS 55RNL-2-LS-4-24089 BEFORE
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationMeter, PD Series, K12-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18) Item
More informationSERVICE PARTS LIST. 18 Volt Sawzall B58D BULLETIN NO CATALOG NO
Tab Square Groove CATALOG NO. 2620-20 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 18 Volt Sawzall IMPORTANT Field (22) to be assembled with tapper to back and square groove
More informationDetroit Speed, Inc. Front Coilover Conversion GM A-body P/N: &
Detroit Speed, Inc. Front Coilover Conversion 1964-67 GM A-body P/N: 030306 & 030307 The Detroit Speed, Inc. Front Coilover Conversion Kit is a direct bolt-in kit that provides excellent ride quality along
More information250P Manure Spreader
0P Manure Spreader Illustrated Parts Breakdown Page - Page Page Page Page Page Page Page Page Page Page Page Page Page Page - Page Page Page 0 Complete Front End PTO/Jack/Hitch Assembly Front Pulley Assembly
More informationNOTE: Order parts by Catalog Number Only. DO NOT order by Reference Number.
K-C/K-R Cage Machine Transportation Cart Assembly 0 NOTE: Order parts by Catalog Number Only. Ref. No. 0 Catalog No. 00 000 0 0 0 0 0 00 0 0 0 0 0 Description Cart Assembly Hex Nut /" () Lock Washer /"
More informationV75-II PLOW PARTS MANUAL
PLOW RWF INDUSTRIES 873 Devonshire Ave., Woodstock, Ontario N4S 8Z4 Tel: (519) 421-0036 Toll Free: 1-800-263-1060 Fax: (519) 421-0028 Email: rwf@wwdc.com GENERIC JANUARY 2015 The information contained
More informationBALE KING VORTEX 3100 HD BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS
PARTS MANUAL BALE KING VORTEX 3100 HD BALE KING GREEN & DEGELMAN BALE KING YELLOW MODELS MANUFACTURED BY: BRIDGEVIEW MANUFACTURING INC. P.O. BOX 4 GERALD, SASK. CANADA S0A 1B0 PHONE: (306) 745-2711 FAX:
More informationPart # Impala Air Suspension System
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11040298 58 Impala Air Suspension System Front Components: 1 11053001 HQ Series Front Shockwaves 1 11052899
More informationTools, Equipment and Supplies Needed:
153-162 DISC BRAKE/DUAL MASTER CYLINDER CONVERSION Please take the time to read the enclosed instructions carefully. If you have any questions, call our Product Assistance personnel for clarifi cation.
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. M18 Sawzall
Pull both Brush Tubes (25) back before removing or installing the Armature (2) to prevent damage to the commutator. Brush Tube SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
More informationFX65 Skidding Winch Parts Manual. S/N to S/N
FX65 Skidding Winch Parts Manual S/N 5654 to S/N 56574 Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing
More informationSERVICE PARTS LIST. 18 Volt Sawzall STARTING SERIAL NO. B58B BULLETIN NO
Tab Square Groove CATALOG NO. 2620-20 IMPORTANT Field (22) to be assembled with tapper to back and square groove to the top. Motor Cage (35) must be oriented with tab to the bottom. SERVICE PARTS LIST
More informationInstallation, Operation & Maintenance Manual for Flo-Max II Coupler Model FM126
IMPORTANT: The Flo-Max II coupler is designed to disconnect the nurse tank hose from a tool bar before the straight pull force on the hose exceeds 450 pounds. Upon disconnect, swing checks in both halves
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 18 Volt Sawzall STARTING SERIAL NO. Spindle (38) to be assembled
Pull Brush Tubes () back before removing or installing the Armature (21) to protect commutator. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 18 Volt Sawzall CATALOG NO. 2620-20
More informationPart # GM G Body Air Suspension System
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11320298 78-88 GM G Body Air Suspension System Front Components: 1 11323001 HQ Series Front Shockwaves
More informationPart # Impala Level 2 Complete Coil-Over System HQ Series
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11290210 65-66 Impala Level 2 Complete Coil-Over System HQ Series Front Components: 1 11283509 Front HQ
More informationThis is trial version
Z-Standards Contents (Alphabetical order, terms partly according to DIN 16750) A All dimensions shown in this catalogue are specified in mm, given tolerances refer to an ambient temperature of 20 C Prod.-No.
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 18 Volt Sawzall STARTING SERIAL NO. See note on page 3.
Pull Brush Tubes () back before removing or installing the Armature (2) to protect commutator. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 8 Volt Sawzall CATALOG NO. 2620-20
More informationDetroit Speed, Inc. Front Coilover Conversion Camaro/Firebird, A-Body P/N: , , &
Detroit Speed, Inc. Front Coilover Conversion 1970-81 Camaro/Firebird, 1968-72 A-Body P/N: 030308, 030309, 030313 & 030314 The Detroit Speed, Inc. Front Coilover Conversion Kit is a direct bolt-in kit
More informationInternal Pressure Pipe Cutters. Manual E540
Internal Pressure Pipe Cutters Manual E540 Contents Logan Internal Pressure Pipe Cutters Overview...2 Uses...2 Construction...2 Tool Illustration...3 Operation...2 Single Cut from a Fixed Platform... 2
More informationSmith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
More informationGroup 2 FRONT SUSPENSION CONTENTS
FRONT SUSPENSION 1 Group 2 FRONT SUSPENSION CONTENTS Paragraph Page Front Wheel Bearing Adjustment 8 5 Front Suspension Height Adjustment 9 5 Using Tool C-3608 Without Using Tool C-3608 Front Wheel Alignment
More information2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER
0/0 This Manual applies to models 0 and 0 that use a blade pan which measures. blade hole center to blade hole center. Also blades measure 8. from hole center to blade tip. See Section if these dimensions
More informationMaintenance Information
16575243 Edition 2 October 2013 Air Screwdrivers 1R Series Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
More informationPart # Impala Level 1 Complete Coil-Over System RQ Series
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11290109 65-66 Impala Level 1 Complete Coil-Over System RQ Series Front Components: 1 11283509 RQ Series
More informationDiscount-Equipment.com
REQUIRED TOOLS LS Series Remix Shaft Installation Instructions /8", /6", /2" Allen Wrenches Snap Ring Pliers (Light Duty) /" Combination Wrench Loctite #22 Blue /" Socket w/ /8" Ratchet Electric Drill
More informationRetriever 360G/P. 5/92 revised 2/01 FORM NUMBER
Retriever 360G/P PARTS LIST Advance MODELS 56468470, 56468480 This parts list is for machines after serial number 505073 All models covered in this manual are OBSOLETE 5/92 revised 2/01 FORM NUMBER 56042267
More informationDrilling Products Brochure
CANADIAN RECON MANUFACTURING Drilling Products Brochure Canadian Recon is a manufacturer and supplier of a wide range of Drilling Products and Equipment. Our main focus is on the Diamond or Core Drilling
More information3M Overhaul Service Kit
SERVICE INSTRUCTIONS FOR 3M 12,000 RPM 3 in. (77 mm) RANDOM ORBITAL SANDERS 3M Overhaul Service Kit The part number 20346, 3M Overhaul Service Kit, contains all the replacement parts that naturally wear
More informationMaintenance Information
16573321 Edition 3 February 2014 Air Grinder Series 61H Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
More informationMaster Index. Master Index. / North America International
/ info@timeltd.ca Mining General Drilling Fluids Sheave Blocks Barriers - Safety Gates and Fencing CAB Products Industrial Tool Bags Ridgid Wrenches GRUVLOCK Connections Muck Scoop Miners Wrench Lasers
More informationPARTS LIST, PRESSURE CYLINDER
PARTS LIST, PRESSURE CYLINDER KEY QTY. PART NO. DESCRIPTION 1 1 306650 Valve sleeve (tension) 2 1 306651 Valve stem (tension) 3 1 306652 Valve sleeve (seal) 4 1 306653 Valve stem (seal) 5 1 306657 Catch
More informationCP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 X 5 Ring screw 6156731760 1 1 1 1 1 X 6 Autobalancer
More informationPart # GM F-Body Front TruTurn System GM F-Body TruTurn System. Table of contents. Installation Instructions
Part # 1119599-190-191 GM F-Body Front TruTurn System Recommended Tools 190-191 GM F-Body TruTurn System Installation Table of contents Page... Included components Page... Upper Control Arm Components
More informationJACKS: **A-FRAME **STEMS **SWIVEL **RACK **MARINE **ACCESSORIES BUTLER BUILT * BUTLER TOUGH QUALITY, PERFORMANCE AND DEPENDABILITY FOR 50 YEARS
JACKS: **A-FRAME **STEMS **SWIVEL **RACK **MARINE **ACCESSORIES BUTLER BUILT * BUTLER TOUGH QUALITY, PERFORMANCE AND DEPENDABILITY FOR 50 YEARS PAGE 800-1 A-FRAME JACKS / JACK STEMS Butler A-Frame Jacks
More informationFX65 Skidding Winch Parts Manual. Prior to S/N
FX65 Skidding Winch Parts Manual Prior to S/N 5654 Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing
More informationTOWING ACCESSORIES. New to CURT towing accessories! 168 TOWING ACCESSORIES CURTMFG.COM CURTMFG TOWING ACCESSORIES
ACCESSORIES ACCESSORIES Scan for live digital version Towing accessories are a great way to increase your sales by encouraging the consumer to buy products along with his or her hitch purchase. Our full
More informationMODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541)
OPERATOR S MANUAL PARTS CATALOG MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541) PART NO. 250611 200026 Late Model 70 Series 290374 Early Model 70
More informationPARTS BOOK ROTARY HEADS 72 CUT SKID-STEER MOUNT
PARTS BOOK ROTARY HEADS 72 CUT SKID-STEER MOUNT DIAMOND MOWERS, LLC 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS WILL DIAGNOSE YOUR
More informationINSTRUCTIONS. Disassembly. Shifter Cam Assembly. Shifter Forks
INSTRUCTIONS Disassembly To protect against accidental start-up of vehicle, always disconnect the negative battery cable before working on the motorcycle. Failure to disconnect the battery cable could
More informationDiscount-Equipment.com
LS40D, LS40TD, LS50TD, LS60TD LS-Series Remix Shaft Coupler Retrofit Kit Installation Instructions The following instructions are intended to assist the user in the installtion of the LS-Series Remix Shaft
More informationMaintenance Information
Form 16573321 Edition 1 July 2004 Air Grinder Series 61H Maintenance Information Save These Instructions Always wear eye protection when operating or performing maintenance on this tool. Always turn off
More informationMaintenance Information
04581245 Edition 2 May 2014 Air Grinder, Die Grinder and Sander Series G2 (Angle) Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings,
More informationGlobal West Suspension 655 South Lincoln Ave San Bernardino Ca Phone Fax Web address globalwest.
Global West Suspension 655 South Lincoln Ave San Bernardino Ca. 92408 Phone 877-470-2975 Fax 909-890-0703 Web address globalwest.net Mustang coilover instruction sheets for 64-66 Kit includes the following
More informationGelcoat Fluid Section
3102-00-01 Fluid Section MAGNUM VENUS PRODUCTS Maintenance & Repair Manual Part No. M3102-00-01 Revision 05.30.01 Maintenance & Repair Manual Fluid Section Module MVP Venus Phone: (253) 854-2660 (800)
More informationPart # Impala TQ CoilOver Suspension Package
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11040311 58 Impala TQ CoilOver Suspension Package Front Components: 1 11053511 TQ Series Front Coilovers
More informationModels 642E, 642F, 662E, 644E, 664F, & 6A4E
Models E, F, E, E, F, & AE 0 0 0 0 Models E, F, E, E, F, & AE. -0 Lock Jam Nut /-. -0 Flat Idler. -B Auger Idler Arm. 0-0A Hex Cap Screw /- x.0. -0 Bushing. -0 Bell Washer. -00 Hex Nut /-. -0 Hex Lock
More informationWEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST. (517) Fax (517) MINIMUM BILLING $20.00
EFFECTIVE JULY 1, 2014 WEAVER JACK CORP. MASTER PARTS PRICE & IDENTIFICATION LIST (517) 263-6500 Fax (517) 263-2810 MINIMUM BILLING $20.00 THIS PRICE LIST SUPERSEDES ALL PREVIOUS PARTS PRICE LISTS (Prices
More information