MINING & DRILLING PRODUCTS. P Core Retrieval System
|
|
- Leslie Walsh
- 5 years ago
- Views:
Transcription
1 MINING & DRILLING PRODUCTS P Core Retrieval System
2 CORE BARREL ASSEMBLY, P -0-0 Core Barrel Assembly, 0 ft (.0 m) -0-0 Core Barrel Assembly, ft (. m) -0-0 Inner Tube Assembly, 0 ft (.0 m) Inner Tube Assembly, ft (. m) 0 Locking Coupling, Conventional, Tang 00 Adaptor Coupling 00 Landing Ring A - 00 Outer Tube, 0 ft (.0 m) B - 00 Outer Tube, ft (. m) 00 Inner Tube Stabilizer 0000 Head Assembly A - 00 Inner Tube, 0 ft (.0 m) B - 00 Inner Tube, ft (. m) 00 Stop Ring 000 Core Lifter, Slotted 0 00 Core Lifter Case Note: Please refer to the P Core Barrel Options and Kits page for alternatives to the standard P Core Barrel components. A B A B info@di-corp.com
3 CORE BARREL OPTIONS AND KITS, P Item Part No Description 0 Locking Coupling, Conventional, No Tang 00 Locking Coupling, Full-Hole, Tang 0 Locking Coupling, Full-Hole, No Tang 00 Landing Indicator, Bushing, No OD Groove 00 Shut-Off Valve, Soft 00 Solid Spindle Spacer 0 Inner Tube Cap Assembly, With Thread Protector 0 Inner Tube Coupling 00 Graphite Core Barrel Plug 0 00 Gauge Assembly, Bit & Shell info@di-corp.com
4 HEAD ASSEMBLY, P Head Assembly, P 00 Spearhead Point 00 Spearhead Spring 00 Detent Plunger 00 Spearhead Pin 00 Spearhead Base 00 Latch Retracting Pin 0 Latch Retracting Case 0 Latch Body, Upper 00 Latch Pivot Pin Latch Spring 00 Latch* 00 Landing Shoulder* 00 Stainless Steel Ball 00 Landing Indicator Bushing, OD Groove 00 Latch Body, Lower 00 Nord-Lock Washer 00 Hex Nut 00 Spindle 00 Shut-Off Washer* 0 00 Shut-Off Valve, Hard* 00 Tapered Shut-Off Washer* 00 Spindle Bearing, Upper 00 Spindle Bushing* 00 Spindle Bearing, Lower 00 Compression Spring 00 Shelf Locking Hex Nut 00 Inner Tube Cap Assembly, No Thread Protector* 00 Thread Protector, Inner Tube Cap* Note: Items with * are exclusive to the P Wireline System. All other items are common between H & P systems. Please refer to the P Core Barrel Options and Kits page for alternatives to the standard P Head Assembly components info@di-corp.com
5 INNER TUBE CAP ASSEMBLY, P Inner Tube Cap Assembly, P 00 Inner Tube Cap Body 00 Grease Fitting 00 Stainless Steel Ball 00 Check Valve Body info@di-corp.com
6 INNER TUBE CAP ASSEMBLY, P Inner Tube Cap Assembly, P With Thread Protector 00 Inner Tube Cap Body 00 Grease Fitting 00 Stainless Steel Ball 00 Check Valve Body 00 Thread Protector, Inner Tube Cap info@di-corp.com
7 CONVERSION KIT, P Conversion Kit, Link-Latch P to Edge Latch P 00 Edge Latch 000 Latch Spring 00 Latch Retracting Pin 00 Latch Pivot Pin 00 Drift Pin Tool - Latch Retracting Pin 00 Drift Pin Tool - Latch Pivot Pin 0 Conversion Instructions (not shown) 0 Parts Pouch (not shown) info@di-corp.com
8 FLUID RETENTION KIT, NHP Fluid Retention Kit, NHP 00 Stainless Steel Ball 00 Fluid Retention Bushing, Standard 0 Fluid Retention Bushing, Heavy Mud 000 Compression Spring, Light (Green) 000 Compression Spring, Medium (Blue) 000 Compression Spring, Heavy (Red) Note: Heavy mud fluid retention bushing (0) has a small groove machined into the OD of the part. A Parts Pouch is available separately (0) info@di-corp.com
9 OVERSHOT ASSEMBLY, P Overshot Assembly, P 00 Cable Swivel Eye Bolt 00 Cable Swivel Collar 000 Thrust Bearing 00 Castle Nut 00 Cotter Pin 00 Grease Fitting 00 Cable Swivel Body 00 Jar Staff 00 Jar Tube 0 00 Locking Sleeve, Slotted 00 Hex Nut 00 Nord-Lock Washer 000 Overshot Head Assembly 00 Loading Fork Tool 0 Loading Funnel info@di-corp.com
10 OVERSHOT HEAD ASSEMBLY, P Overshot Head Assembly, P 00 Overshot Head Body 00 Self Locking Set Screw 00 Compression Spring 000 Lifting Dog 00 Pivot Pin 00 Sway Pin 00 Pin Link 00 Self Locking Cap Screw 0 Spring Pin 0 0 Overshot Sleeve info@di-corp.com
11 CASING ADVANCER ASSEMBLY, PW Casing Advancer Assembly, PW 0 Spearhead 00 Nord-Lock Washer 0 Release Shaft 00 Latch Body 00 Latch Shoe 0 Latch Shoe Spring 0 Locating Pin 000 Stop Latch Set ( parts) 00 Stop Latch Pin 0 0 Cotter Pin 00 Stop Latch Spring 00 Spacer Set (0 parts) 00 Bit Sub (c/w -/ API Reg. Box) 0 Loading Sleeve 0 Driver Inner Assembly Note: System consists of an Inner Assembly (with loading sleeve) and Driver. Driver has PW Casing thread connections. System works with P Overshot for insertion & retraction info@di-corp.com
MINING & DRILLING PRODUCTS. N3 Core Retrieval System
MINING & DRILLING PRODUCTS N Core Retrieval System CORE BARREL ASSEMBLY, N - - 090 Core Barrel Assembly, 0 ft (.0 m) - - 09 Core Barrel Assembly, ft (. m) - - 09 Inner Tube Assembly, 0 ft (.0 m) - - 09
More informationMINING & DRILLING PRODUCTS. B Core Retrieval System
MINING & DRILLING PRODUCTS B Core Retrieval System CORE BARREL ASSEMBLY, B -0-00 Core Barrel Assembly, 0 ft (.0 m) -0-00 Core Barrel Assembly, ft (. m) -0-00 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner
More informationH Core Retrieval System
H Core Retrieval System Global Drilling Products Pte Ltd 9 Loyang Way, #0-0, Changi Logistics Centre Singapore 0 Telephone: + 9 info@globaldrillingproducts.com www.globaldrillingproducts.com Core Barrel
More informationMINING & DRILLING PRODUCTS. N2U Core Retrieval System
MINING & DRILLING PRODUCTS NU Core Retrieval System CORE BARREL ASSEMBLY, NU -0-009 Core Barrel Assembly, 0 ft (.0 m)* -0-009 Core Barrel Assembly, ft (. m)* -0-009 Inner Tube Assembly, 0 ft (.0 m)* -0-009
More informationOvershots. Drill Rods. Casing. Tools 12/06-MKT1644 P/N M
REV 0-DEC-06 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Diamond Products Impregnated Bits Reaming
More informationOvershots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
More informationOvershots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
More informationTABLE OF CONTENTs DIAMOND TOOLS DOWN THE HOLE PUMPS DRILLING ADDITIVES & LUBRICANTS SURVEY SYSTEMS ACCESSORIES GEOTECHNICAL EQUIPMENT
TABLE OF CONTENTs DIAMOND TOOLS DOWN THE HOLE DRILL rigs PUMPS DRILLING ADDITIVES & LUBRICANTS SURVEY SYSTEMS Denver, Colorado, United States, 2008 Jeff Deel ACCESSORIES GEOTECHNICAL EQUIPMENT WWW.FORDIA.COM
More informationContinuous Sampling OVERSHOT STYLE ROD STYLE SWIVEL OVERSHOT ASSEMBLY CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY
ROD STYLE OVERSHOT STYLE OVERSHOT ASSEMBLY SWIVEL CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY SAMPLE BARREL SPLIT OR SOLID SHOE Split Barrel Sampler Assemblies Continuous
More informationOvershots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
More informationIntroduction Augers. Inclinometer Casing. Subs & Pipe Wrenches. Samplers. Hoisting, Lowering, Hammers & Rockbits. Corebarrels, Drill Rods & Casings
Contents Introduction Augers Inclinometer Casing Subs & Pipe Wrenches Samplers Hoisting, Lowering, Hammers & Rockbits Corebarrels, Drill Rods & Casings Diamond Products Thin Wall Bits & Saw Blades Water
More informationSoil Investigation Tools Catalogue
Soil Investigation Tools Catalogue 2012 KUVAWALA CORE DRILL EQPT. PVT. LTD. QUALITY RUNS DEEP www.kuvawalacoredrill.com INDEX TUNGSTEN CARBIDE BITS DRILL RODS SOIL SAMPLING CORE BARRELS SPLIT TUBE SAMPLER
More informationMOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES
MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES Prepared for the University of Texas by Pettigrew Engineering, PLLC Tom Pettigrew, PE President Revision: 5 15 October
More informationCONTINUOUS FLIGHT AUGERS AND BITS
CONTINUOUS FLIGHT AUGERS AND BITS Hex-Tube Augers Available in Hole Sizes 2½ (6 mm) through 12 (05 mm) Hex Sized 1 / 16, 1 1 / 8, 1 5 / 8 and 2 (20.6 mm, 29 mm, 1 mm and 50.8 mm) Field replacement shank
More informationModel 900 Walk Behind Edger
Little Wonder Model 900 Walk Behind Edger OPERATOR S MANUAL Manual Includes: Safety Information Operating Instructions Maintenance Schedule Tips For Better Operation Illustrated Parts Breakdown Please
More informationN&N Drilling Supply Mfr. (800)
W FLUSH JOINT CASING Casing Description Length Part# Weight (Lb) AW 1 12-AWFJC-1 4 AW 2 12-AWFJC-2 7 AW 3 12-AWFJC-3 11 AW 5 12-AWFJC-5 19 AW 10 12-AWFJC-10 37 BW 1 12-BWFJC-1 7 BW 2 12-BWFJC-2 15 BW 3
More informationMWD Components Ceramic & Carbide Parts MWD Electronics Running Gear Handling Equipment Drill Pipe Screens Float Valves Repair Kits Job Boxes Gamma
Float Valves Repair Kits Excellence in Energy Services for over years www.huntingplc.com Drilling drilling.tools@hunting-intl.com specialty.supply@hunting-intl.com www.hunting-intl.com/titan/contact-titan
More informationDrill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated Bits
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More informationC SERIES WIRELINE CORING SYSTEM WUXI DRILLING TOOLS FACTORY. Introduce to C series core barrels
C SERIES WIRELINE CORING SYSTEM WUXI DRILLING TOOLS FACTORY Introduce to C series core barrels C-series wireline core barrel designed by WUXI DRILLING TOOLS FACTORY,JINSANJIAO(short for JSJ) is our brand,introduces
More information1 HR-301/D Parts Manual. Table Of Contents
Table Of Contents 301/D Parts Manual 3 Point Hitch...2 Pull-Type Hitch...4 Main Frame...6 Angle Adjuster - Serial Number 44982 & Prior...8 Rotor Assembly - Serial Number 44982 & Prior...10 Rotor Assembly
More informationSmith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List
Issue/Rev. 0.0 (1/14) Smith Meter PD Meters Meter, PD Series, M16-S3, S5, S6 (1993-Present) Parts List Bulletin PO01023 *For meters which began shipping in 1993 to current. For meters shipped prior to
More informationPARTSBOOK. Hall Manufacturing, Inc E. Washington Ave., P.O. Box Drawer 5638 North Little Rock, AR (501)
540 RPM 2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes
More informationATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY
2006 ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 1 of 60 AIR INTAKE ASSEMBLY 2006 ATV 90 UTILITY GREEN (A2006KUB2BUSG) Page 2 of 60 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-005
More information250P Manure Spreader
0P Manure Spreader Illustrated Parts Breakdown Page - Page Page Page Page Page Page Page Page Page Page Page Page Page Page - Page Page Page 0 Complete Front End PTO/Jack/Hitch Assembly Front Pulley Assembly
More informationPart # Mustang Tru-Turn Suspension Package
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 12099599 64-66 Mustang Tru-Turn Suspension Package Front Components: 1 12093699 Upper Strong Arms 1 12092899
More informationPARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print.
2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes at
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
More informationChain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
More informationPart # GM F-Body Front TruTurn System GM F-Body TruTurn System. Table of contents. Installation Instructions
Part # 1119599-190-191 GM F-Body Front TruTurn System Recommended Tools 190-191 GM F-Body TruTurn System Installation Table of contents Page... Included components Page... Upper Control Arm Components
More informationCP-1, CP-2, CP-2L & CPD-2 Series Overhaul
Replacement of Mechanical Seals for CM, CMU, CS and CSU Series Pumps Installation Instructions Form No. F-1031 Section 5013 Issue Date 03/01/85 Rev. Date 02/08/11 CP-1, CP-2, CP-2L & CPD-2 Series Overhaul
More informationATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY
2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 1 of 58 AIR INTAKE ASSEMBLY 2008 ATV 90 UTILITY CALIFORNIA GREEN (A2008KUB2BCAG) Page 2 of 58 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description
More informationMWD/ Wireline Replacement Parts MS Collar Assembly 13. MWD Miscellaneous 14. Bluestar 15. Running Gear 18. Slide on Centralizers 21
Our Mission: To anticipate and exceed the needs of our customers, through innovative engineering, manufacturing excellence, exceptional customer service and real time turn-key solutions. Table of Contents
More informationGroup 2 FRONT SUSPENSION CONTENTS
FRONT SUSPENSION 1 Group 2 FRONT SUSPENSION CONTENTS Paragraph Page Front Wheel Bearing Adjustment 8 5 Front Suspension Height Adjustment 9 5 Using Tool C-3608 Without Using Tool C-3608 Front Wheel Alignment
More informationDVX 90 MODEL NUMBER A2008KSB2BUSD (BLACK-RED) MODEL NUMBER A2008KSB2BUSE (BLACK-CAT GREEN) MORE TO GO ON. TM
2008 DVX 90 Illustrated Parts Manual MODEL NUMBER A2008KSB2BUSD (BLACK-RED) MODEL NUMBER A2008KSB2BUSE (BLACK-CAT GREEN) MORE TO GO ON. TM TABLE OF CONTENTS Black-Red (Model No. A2008KSB2BUSD) Black-Cat
More informationTools, Equipment and Supplies Needed:
153-162 DISC BRAKE/DUAL MASTER CYLINDER CONVERSION Please take the time to read the enclosed instructions carefully. If you have any questions, call our Product Assistance personnel for clarifi cation.
More informationATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 1 of 60 AIR INTAKE ASSEMBLY
2008 ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 1 of 60 AIR INTAKE ASSEMBLY 2008 ATV 50 DVX BLACK-RED (A2008KSA2BUSD) Page 2 of 60 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3303-005
More information2720/12720 PARTS MANUAL 72A SECTION FLEX WING ROTARY MOWER
0/0 This Manual applies to models 0 and 0 that use a blade pan which measures. blade hole center to blade hole center. Also blades measure 8. from hole center to blade tip. See Section if these dimensions
More informationMeter, PD Series, K12-S1, S3, S5, S6 and S7
PARTS LIST Meter, PD Series, K12-S1, S3, S5, S6 and S7 Bulletin PO01018 Issue/Rev. 0.4 (3/18) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 2 Bulletin PO01018 Issue/Rev. 0.4 (3/18) Item
More informationIllustrated Parts List
Illustrated Parts List ZY05289 March 202 Contents How To Use The Illustrated Parts List... 3 AIR SYSTEM... 4 CLUTCH ASSEMBLY... 5 CLUTCH SERVO ASSEMBLY... 6 FRONT BEARING COVER ASSY.... 7 FRONT CASE ASSY...
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More informationStep 4 Press the sleeve gear assembly through the center of the bearing plate assembly so that the gear and bearing are in contact.
Rotational Center (ip-3009_page) : DATE: 0//207 QTY Parts Needed On This Page Tools Needed On This Page AM-303 40T Steer Gear, plated Arbor Press AM-0253 /2" ID, /2" Long Bushing 5/32 Allen Wrench AM-002
More informationDrop-In Inside Blowout Preventer Valve
Drop-In Inside Blowout Preventer Valve Disassembly and Assembly Procedures Global Manufacturing, Inc. Lafayette, Louisiana USA 70508 Ph (337) 237-1727 Fax (337) 232-9353 Disassembly and Assembly Procedures
More information1 RS-300/D 320/D 340/D 350H Parts Manual
300/D 320/D 340/D 350H Parts Manual Table Of Contents Three Point Hitch / Hitch Frame Assembly... 3 Tongue Pull Hitch Assembly... 7 Main Gearbox... 11 Crank Handle & Gear... 13 Hydraulic Lift... 15 Rotor
More informationDetroit Speed, Inc. Front Coilover Conversion GM A-body P/N: &
Detroit Speed, Inc. Front Coilover Conversion 1964-67 GM A-body P/N: 030306 & 030307 The Detroit Speed, Inc. Front Coilover Conversion Kit is a direct bolt-in kit that provides excellent ride quality along
More informationTEREX Woodsman 730 BRUSH CHIPPER
Woodsman 730 BRUSH CHIPPER Parts Manual Customer Dealer S/N Frame # Date Woodsman 150 Commerce Drive, Farwell MI 486 Phone: (800) 953-553 Fax: (989) 588-487 Flipper Discharge Chute Hand Crank Belt Shield
More informationIllustrated Parts Manual
Illustrated Parts Manual Transmatic Lawn Tractor MODELS 70, 770 7, 77 7, 77 7, 77 MTD LLC, P.O. BOX CLEVELAND, OHIO -7 PRINTED IN U.S.A. FORM 7-0 (//00) Models 70 & 770 A 7 0 8 0 8 7 8 A 0 Models 70 &
More informationDESCRIPTION Acura TSX SUSPENSION Front - TSX. NOTE: For system description and component location, see Fig. 1.
2004 SUSPENSION Front - TSX DESCRIPTION NOTE: For system description and component location, see Fig. 1. Fig. 1: Identifying Front Suspension Components Wednesday, March 12, 2008 8:30:45 8:30:55 PM Page
More informationSmith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7
Smith Meter PD Meter Meter, PD Series, K12- S1, S3, S5, S6, and S7 Parts List Bulletin PO01018 Issue/Rev 0.1 (7/13) S1, S3, S5 S6, S7 Item Description Qty. K12-S1 K12-S5 K12-S7 Page 2 SS01018 Issue/Rev.
More informationINSTRUCTION S G-Comp Front Suspension: Chevy Nova Speedway Motors, Inc. 2017
INSTRUCTION S 350-100 G-Comp Front Suspension: 62-67 Chevy Nova Speedway Motors, Inc. 2017 Kit Contents: 91035700 G-Comp Bare Subframe 350101 G-Comp Support Tubes 91035702 G-Comp Front Subframe Hardware
More informationFRICK TIMBER TIGER SAWMILLS SIZES: 0 0C
FRICK TIMBER TIGER SAWMILLS SIZES: 0 0C SERVICE S LIST PAGE 2 TIMBER TIGER 0 AND 0C SAWMILLS HOW TO USE S LIST This Parts List provides identification of Frick Timber Tiger s 0 and 0C Standard Sawmills
More information90 Utility Model Number A2013KUB2BUSZ SHARE OUR PASSION.
2013 90 Utility Model Number A2013KUB2BUSZ TM SHARE OUR PASSION. TABLE OF CONTENTS 2013 ATV 90 (Model No. A2013KUB2BUSZ) BODY PANEL AND HEADLIGHT ASSEMBLY... 1 FRONT AND REAR RACK ASSEMBLY... 2 FRAME AND
More information1822-I/1822-IC. Spindle Assembly. Pipe & Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* *
-I/-IC Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support () Pivot Rod () 0 Shoulder Screw
More information320 Series Models 325, 326, 327
0 Series Models,, ROTARY MOWER Published 0/ PARTS MANUAL SECTION An Operator s Manual was shipped with the equipment. The Operator s Manual is an integral part of the safe operation of this machine and
More informationPart # Mustang Tru-Turn Suspension Package
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 12099599 64-66 Mustang Tru-Turn Suspension Package Front Components: 1 12093699 Upper Strong Arms 1 12092899
More informationIN-HOLE TOOLS DIAMOND PRODUCTS OTHER EQUIPMENTS SAMPLING ACCESSORIES DRILLING ADDITIVIES MUD PUMPS JEOGES PRODUCT CATALOUGE 2012
IN-HOLE TOOLS o Core Barrels o Head Assemblies DIAMOND PRODUCTS o Impregnated Drill Bits o Casing Shoe Bits o Reaming Shells OTHER EQUIPMENTS o Water Swivel o Hoisting Plugs o Over-Shot o Recovery Tools
More informationDRIVE_UNIT_ / TRANSOM PLATE
DRIVE_UNIT_989 989 / TRANSOM PLATE Part List DRIVE_UNIT_989 989 / TRANSOM PLATE REF - NO PART NUMBER PART NAME QUANTITY REMARKS 6T4-4583-00-EK PLATE, TRANSOM 2 6T4-09-00-00 MOUNT, RUBBER 2 2 3 6T4-029-00-00
More informationPart s Catalog. LX500 Lawn Tractor. Model No. 13AP60RP744. Original Instructions (EN) (01/31/06)
Part s Catalog For Parts Call 0-- or 0-- LX00 Lawn Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) For Parts Call 0-- or 0-- Model P0RP NUMBER --00 Turf Tire, 0 x 0.0 x -000-00 Rim,.0 x.0-0-0
More informationSERVICE PARTS LIST. SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS M18 Sawzall STARTING SERIAL NO.
Pull both Brush Tubes (25) back before removing or installing the Armature (2) to prevent damage to the commutator. Brush Tube SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
More informationTT8101 Rotary Tedder
TT0 Rotary Tedder Illustrated Parts Breakdown Page Front End Page Page Transport Axle Assembly Cylinder Linkage Page Guards Page Page Page Page Transport Lock Assembly Lift Frame Assembly Center Tunnel
More informationMINING & DRILLING PRODUCTS DRILL ROD AND CASING. Parallel Wall Drill Rod LITE Drill Rod Thin Wall Drill Rod Casing Adaptor Subs.
MINING & DRILLING PRODUCTS DRILL ROD AND CASING Parallel Wall Drill Rod LITE Drill Rod Thin Wall Drill Rod Casing Adaptor Subs www.di-corp.com DOWN TO EARTH BUSINESS AT DI-CORP, WE HAVE PROUDLY DEVELOPED
More information1988 Chevrolet Pickup V SUSPENSION - FRONT (4WD)' 'Front Suspension - "V" Series 1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series
1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series DESCRIPTION NOTE: Vehicle serial numbers used in this article has been abbreviated for common reference to Chevrolet and GMC models. Chevrolet
More informationINSTALLATION GUIDE Bolt-On Drag-Race Strut Clip Chevy II
INSTALLATION GUIDE 7702 Bolt-On Drag-Race Strut Clip 1962-67 Chevy II Description: STRUT CLIP 4130 BOLT ON 62-67 CHEVY II, INCLUDES 4130 ROUND TUBE FRAME CLIP, DOUBLE-ADJUSTABLE STRUTS, ADJUSTABLE-HEIGHT
More informationInternal Pressure Pipe Cutters. Manual E540
Internal Pressure Pipe Cutters Manual E540 Contents Logan Internal Pressure Pipe Cutters Overview...2 Uses...2 Construction...2 Tool Illustration...3 Operation...2 Single Cut from a Fixed Platform... 2
More informationHP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies
12090-8HP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies 12090-8HP Electric PTO Horse Tiller Page 2 of 23 Bolo Tine Assemblies 1 1901975001 2 S Tine Holder-welded steel, fits left or right
More information1. General Description
1. General Description A: SPECIFICATIONS 1. Type Transmission gear ratio Front reduction gear Rear reduction gear 2. TRANSMISSION GEAR OIL Recommended oil Final Transfer 5-forward speeds with synchromesh
More informationXL12 Chain Saw UT Page 1 of 21 Carburetor Chamber
XL12 Chain Saw UT-10080 Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-
More informationFull Flow Reverse Circulation Junk Baskets. Manual B320
Full Flow Reverse Circulation Junk Baskets Manual B320 CONTENTS Logan Full Flow Reverse Circulation Junk Basket Overview... 2 Uses... 2 Construction... 2 Tool Illustration... 3 Operation... 4 Recovering
More informationSERVICE PARTS LIST. 18 Volt Sawzall B58D BULLETIN NO CATALOG NO
Tab Square Groove CATALOG NO. 2620-20 SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 18 Volt Sawzall IMPORTANT Field (22) to be assembled with tapper to back and square groove
More informationThis is trial version
Z-Standards Contents (Alphabetical order, terms partly according to DIN 16750) A All dimensions shown in this catalogue are specified in mm, given tolerances refer to an ambient temperature of 20 C Prod.-No.
More informationDELCO 20/22/25/27MT BREAKDOWN
DELCO 20/22/25/27MT BREAKDOWN J&N UNIT # JanNco # OE PART # LESTER # TYPE VOLT ROTATION TEETH 410-12027 25MT 12 CW 9 410-12028 410-12028R 1109264 6177 25MT 12 CW 10 410-12030R 20MT 12 CW 10 410-12031 410-12031R
More informationPart s Catalog. LX420 & LX460 Lawn Tractors. Model No. 13AX60RG744 Model No. 13AX60RH744
Part s Catalog For Parts Call 0-- or 0-- LX0 & LX0 Lawn Tractors Model No. AX0RG Model No. AX0RH Original Instructions (EN) -0 (0//0) Models X0RG & X0RH --00 Turf Tire, 0 x.0 x -000-00 Rim,.0 x.0-0-0 Wheel
More informationTwin Master Combine. Transmission & Gear Boxes Section 8. 2 Speed Transmission Transmission Gear Shift
Twin Master Combine Transmission & Gear Boxes Section 2 Speed Transmission... 2-4 Transmission Gear Shift... 5-6 PTO Swivel Gear Box 107021... 7- Transition Auger Gear Box 107026... 9-10 Straw Chopper
More informationPart # Impala TQ CoilOver Suspension Package
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11040311 58 Impala TQ CoilOver Suspension Package Front Components: 1 11053511 TQ Series Front Coilovers
More informationPARTS MANUAL FOR R22N/H REAR AXLE
PARTS MANUAL FOR REAR AXLE MARMON-HERRINGTON ALL-WHEEL DRIVE 13001 Magisterial Drive Louisville, KY 40223 TABLE OF CONTENTS REPLACEMENT PARTS & WARRANTY CLAIM PROCEDURE......... 3 DIFFERENTIAL CARRIER
More informationForm 7-53, 11-15c Supersedes Form 7-53, 03-13c Sheet 1 of , Swing Air Jack Hunter Engineering Company
Form 7-53, 11-15c Sheet 1 of 8 133-84-1, 133-85-1 Swing Air Jack 2013-2016 Hunter Engineering Company 133-84-1, 133-85-1 Swing Air Jack REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING Form 7-53, 11-15c
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. M18 Sawzall
Pull both Brush Tubes (25) back before removing or installing the Armature (2) to prevent damage to the commutator. Brush Tube SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
More informationModels 642E, 642F, 662E, 644E, 664F, & 6A4E
Models E, F, E, E, F, & AE 0 0 0 0 Models E, F, E, E, F, & AE. -0 Lock Jam Nut /-. -0 Flat Idler. -B Auger Idler Arm. 0-0A Hex Cap Screw /- x.0. -0 Bushing. -0 Bell Washer. -00 Hex Nut /-. -0 Hex Lock
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 18 Volt Sawzall STARTING SERIAL NO. Spindle (38) to be assembled
Pull Brush Tubes () back before removing or installing the Armature (21) to protect commutator. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 18 Volt Sawzall CATALOG NO. 2620-20
More informationSERVICE PARTS LIST. 18 Volt Sawzall STARTING SERIAL NO. B58B BULLETIN NO
Tab Square Groove CATALOG NO. 2620-20 IMPORTANT Field (22) to be assembled with tapper to back and square groove to the top. Motor Cage (35) must be oriented with tab to the bottom. SERVICE PARTS LIST
More informationEye-bolt for front chain adjustment, Pre-49 singles, twins, 1958-on CS singles
Part No. AJS & MATCHLESS GEARBOX & CLUTCH - NEW PARTS Price (20% VAT) Price (excl VAT) Tool for adjusting clutch spring nuts (heavier duty than 017254 spanner) 5.00 4.17 017254 Spanner, single end, dynamo
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS. 18 Volt Sawzall STARTING SERIAL NO. See note on page 3.
Pull Brush Tubes () back before removing or installing the Armature (2) to protect commutator. SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 8 Volt Sawzall CATALOG NO. 2620-20
More informationSuper EZ Chain Saw UT Page 1 of 18 Tools And Accessories
Super EZ Chain Saw UT-10440 Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 2 of 18 Tools And Accessories 24299 24299 ANVIL- Crankshaft installation 24304 24304 BIT- #2 pozidrive 24295
More informationILLUSTRATED PARTS MANUAL
ILLUSTRATED PARTS MANUAL Transmatic Lawn Tractor Models 760-779 IMPORTANT READ SAFETY RULES AND INSTRUCTIONS CAREFULLY BEFORE OPERATION Warning: This unit is equipped with an internal combustion engine
More informationHORSE III 8HP ROTO TILLER (S/N ) Page 1 of 25 Bolo Tine Assemblies
HORSE III 8HP ROTO TILLER (S/N 640000-855638) Page 1 of 25 Bolo Tine Assemblies HORSE III 8HP ROTO TILLER (S/N 640000-855638) Page 2 of 25 Bolo Tine Assemblies 1 GW-2415 2 S/F TINE HOLDER- welded steel.
More informationMANUAL TRANS OVERHAUL - BORG-WARNER - T56 6-SPEED MANUAL TRANSMISSIONS Borg-Warner T56 (MM6) 6-Speed
IDENTIFICATION MANUAL TRANS OVERHAUL - BORG-WARNER - T56 6-SPEED 1998 MANUAL TRANSMISSIONS Borg-Warner T56 (MM6) 6-Speed Transmission has 2 identification labels, located on lower left side of case. One
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More informationPWC - 33
PWC - 33 WY33N13BS SPARE PARTS LIST Mower Assembly Caster Kit Ref.# Part# Description Ref.# Part# Description 1 3301010 Linchpin 11 B6182-12 Lock nut M12 2 B97.1-20 Washer 20 12 3301040 Caster Wheel Arm
More informationChevy Nova Pro-Touring Front Suspension Installation Instructions
1962-1967 Chevy Nova Pro-Touring Front Suspension Installation Instructions 1-800-984-6259 www.totalcostinvolved.com 1 Pro-Touring Clip A-Arm Assembly Sway Bar Assembly Fender Panel Kit 8 7/16-20 * 1 ¼
More informationPARTS. Headstock 133A 127A 107A 72 73A A 55A 37A -71-
-71- Headstock 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66
More informationSuper EZ Chain Saw UT Page 1 of 19 Carburetor
Super EZ Chain Saw UT-10580 Page 1 of 19 Carburetor Super EZ Chain Saw UT-10580 Page 2 of 19 Carburetor 1 93203A 1 /P Repair Kit Includes items 1-16. 2 93203A 1 /P Repair Kit Includes items 1-16. 3 93203A
More informationPart # Impala Level 2 Complete Coil-Over System HQ Series
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11290210 65-66 Impala Level 2 Complete Coil-Over System HQ Series Front Components: 1 11283509 Front HQ
More informationDescription 25 SUPPORT ROLL 126 SAFETY CAM 132 COLLAR 208 Bottom Strainer 218 "O" RING 308 ERICKSON HOLDER 311 THRUST WASHER 326 BUSHING 327 O-RING
Item Description 25 SUPPORT ROLL 126 SAFETY CAM 132 COLLAR 208 Bottom Strainer 218 "O" RING 308 ERICKSON HOLDER 311 THRUST WASHER 326 BUSHING 327 O-RING 328 CHUCK SLIDE 329 THREADING CLUTCH BUSHING 335
More informationMODEL EF Full Circle Tire Spreader
MODEL EF Full Circle Tire Spreader Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV. 062917 P/N: 81-0050C CAUTION
More information2014 Product Catalog.
www.wtechnologylink.com 2014 Product Catalog 19515 Oil Center Boulevard, Houston, TX, 77073 Phone: 281-209-9111 Toll Free Sales: 1-888-592-2996 (USA) Fax: 281-209-9191 Email: sales@wtechnologylink.com
More informationPart # Impala Air Suspension System
350 S. St. Charles St. Jasper, In. 47546 Ph. 812.482.2932 Fax 812.634.6632 www.ridetech.com Part # 11040298 58 Impala Air Suspension System Front Components: 1 11053001 HQ Series Front Shockwaves 1 11052899
More informationSXLAO Chain Saw UT Page 1 of 21 Carburetor Chamber
SXLAO Chain Saw UT-10045 Page 1 of 21 Carburetor Chamber SXLAO Chain Saw UT-10045 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-
More informationOne Step Ahead Rod Cutter (Front Mount Unit)
One Step Ahead Rod Cutter (Front Mount Unit) Front Gauge Wheels Section 4 Model Years 1992 1994... 2-5 Model Years 1995 1996... 6-9 Model Years 1997 Present... 10-11 Front Gauge Wheel Divider 1992 Present...
More informationParts Catalog. Commercial / Residential 28 Mower
Parts Catalog R Commercial / Residential 28 Mower Worldlawn Power Equipment, Inc. 422 Turnbull Canyon Road City of Industry CA 91744 Toll Free Number:1-866-9-Mowers(1-866-966-9377) CONTENT CONTENT Mower
More informationILLUSTRATED PARTS LIST MFG. ID NO MODEL NUMBER CRT900L PRODUCT NUMBER Rev BY
ILLUSTRATED PARTS LIST MFG. ID NO. 90930000 MODEL NUMBER CRT900L PRODUCT NUMBER 90 93 00-8 31 0-7 Rev. 1 03.10.1 BY HANDLE ASSEMBLY 101 10 100 1 1 13 11 10 1 7 1 1 1 0 19 11 handle_assy_10 18 31 17 1 3
More information