Drilling Products Brochure

Transcription

1 CANADIAN RECON MANUFACTURING Drilling Products Brochure

2 Canadian Recon is a manufacturer and supplier of a wide range of Drilling Products and Equipment. Our main focus is on the Diamond or Core Drilling Industry Years of experience have taught us to use only the very best quality of materials While our main focus is on Diamond Drilling, we also provide a wide range of other products. Visit our product page for available Tool s and Equipment. 2

3 Core Diamond Drilling Rigs Canadian Recon specializes in Hydraulically Driven Core Drills for the Exploration Industry. Available in 4 Base Models which cover a wide range of drilling conditions and depth. Time tested to be tough, reliable and user friendly. DRILL DEPTH AR 65 N ROD TO 2000 Feet + AR 125 N ROD TO 2000 Feet + AR 175 N ROD TO 2000 Feet + AR 250 N ROD TO 2000 Feet + 3

4 Power and Dependability The AR 250 HD is the King! With Depths to Feet and Beyond the 250 is the choice for deep production drilling. Shown here in action this drill took H Rod to 5,000 Feet without breaking a sweat! 4

5 AR 250 HD Hydraulic Deep Diamond Core Drill Power Unit Isuzu Model 65D Turbo Diesel Water Cooled 9.8L (600 CI) Power Rating of RPM Fitted with lifting eyes for easy flying Rotation Unit Hollow Spindle Drive accepts up to P size core barrel FUNK 4 Speed Transmission REXROTH 6VM/107 cc motor Hydraulic Module Control Panel Self Contained and Very Friendly Electric Over Hydraulic Controls Quick Connect Couplings for fast & simple mob/de-mob Aluminum/Stainless framework and housing provide a corrosion resistant unit. Fitted with lifting eyes for easy lifting Main Line Hoist PULLMASTER M50 Planetary Winch Max Operating Pressure of 2500 PSI 7/8 inch Hoisting Cable Max Line Pull of 50,000 lbs. at max pressure (bare drum) Counter Balance and Sprague Brake for smooth and safe operation Wire Line Hoist AR W-80 Hydraulic Winch Max operating Pressure of 2500 PSI Cable Capacity 8,000 ft of 1/4 Mast All tubular construction Dual Lift Cylinders Angle Drilling - 45 deg off vertical (90 deg) Large Composite Fibre Sheave wheels for smoother operation and extended cable and sheave life Feed Frame Dual Coupled Feed Cylinders Composite Feed Frame slides and stops for smooth operation and wear reduction Options Drill Shack Wind Walls On Deck Mud Tank 5

6 6

7 AR 175 Mid - Deep Range Hydraulic Deep Diamond Core Drill Power Unit Isuzu Model 65D Turbo Diesel Water Cooled 9.8L (600 CI) Power Rating of RPM Fitted with lifting eyes for easy flying Rotation Unit Hollow Spindle Drive accepts up to P size core barrel FUNK 4 Speed Transmission REXROTH 6VM/107 cc motor Hydraulic Module Control Panel Self Contained and Very Friendly Electric Over Hydraulic Controls Quick Connect Couplings for fast & simple mob/de-mob Aluminum/Stainless framework and housing provide a corrosion resistant unit. Fitted with lifting eyes for easy lifting Main Line Hoist PULLMASTER M25 Planetary Winch Max Operating Pressure of 2500 PSI 7/8 Hoisting Cable Max Line Pull of 25,000 lbs. at max pressure (bare drum) Counter Balance and Sprague Brake for smooth and safe operation Wire Line Hoist AR W-80 Hydraulic Winch Max operating Pressure of 2500 PSI Cable Capacity 8,000 ft of 1/4 Mast All tubular construction Dual Lift Cylinders Angle Drilling - 45 deg off vertical (90 deg) Large Composite Fibre Sheave wheels for smoother operation and extended cable and sheave life Feed Frame Dual Coupled Feed Cylinders Composite Feed Frame slides and stops for smooth operation and wear reduction Options Drill Shack Wind Walls On Deck Mud Tank 7

8 The AR 125 Mid-Range Core Drill is a powerful yet compact unit and is the work horse of the fleet. Capable of depth s up to 3,500 Feet Plus. More mobile and lighter than the bigger drills, the AR 125 still packs plenty of power! 8

9 AR 125 Mid Range Hydraulic Deep Diamond Core Drill Power Unit Main Line Hoist Isuzu Model 6BGIT Turbo Diesel PULLMASTER M25 Planetary Winch Water Cooled 6.5L (396 CI) Max Operating Pressure of 2500 PSI Power Rating of RPM Fitted with lifting eyes for easy flying Rotation Unit 3/4 Hoisting Cable Max Line Pull of 25,000 lbs. at max pressure (bare drum) Counter Balance and Sprague Brake for smooth and safe operation Hollow Spindle Drive accepts up to P size core barrel FUNK 4 Speed Transmission REXROTH 6VM/107 cc motor Hydraulic Module Control Panel Wire Line Hoist AR W-50 Hydraulic Winch Max operating Pressure of 2500 PSI Cable Capacity 5,000 ft of 1/4 Self Contained and Very Friendly Mast Electric Over Hydraulic Controls Quick Connect Couplings for fast & simple mob/de-mob Aluminum/Stainless framework and housing provide a corrosion resistant unit. Fitted with lifting eyes for easy lifting All tubular construction Dual Lift Cylinders Angle Drilling - 45 deg off vertical (90 deg) Large Composite Fibre Sheave wheels for smoother operation and extended cable and sheave life Feed Frame Options Single Feed Cylinder Drill Shack Composite Feed Frame slides and stops for smooth operation and wear reduction Wind Walls On Deck Mud Tank 9

10 Tight Quarters are no problem for the AR 65. Light weight and extremely compact, this unit can get into the most remote locations. Steep slopes and small valleys are no problem. But don t be fooled by its size, this little drill can take H to 1400 Feet! IT S A SMALL DRILL WITH AN ATTIITUDE 10

11 AR 65 Compact Hydraulic Deep Diamond Core Drill Power Unit Isuzu Model 4BGIT Turbo Diesel Water Cooled 4.3L (262 CI) Power Rating of RPM Fitted with lifting eyes for easy flying Rotation Unit The newly engineered Gear Box of the 65 is completely Gear Driven. That s right just like the Big Boy s. No more Chain and sprocket like you would expect to see in a small drill. More Powerful, More Dependable, and much, much Quieter! Hollow Spindle Drive accepts up to H size core barrel FUNK 4 Speed Transmission REXROTH 6VM/80 cc motor Hydraulic Module Control Panel Self Contained and Very Friendly Electric Over Hydraulic Controls Quick Connect Couplings for fast & simple mob/de-mob Aluminum/Stainless framework and housing provide a corrosion resistant unit. Fitted with lifting eyes for easy lifting Feed Frame Main Line Hoist PULLMASTER M25 Planetary Winch Max Operating Pressure of 2500 PSI 3/4 Hoisting Cable Max Line Pull of 25,000 lbs. at max pressure (bare drum) Counter Balance and Sprague Brake for smooth and safe operation Wire Line Hoist AR W-50 Hydraulic Winch Max operating Pressure of 2500 PSI Cable Capacity 5,000 ft of 1/4 Mast All tubular construction Dual Lift Cylinders Angle Drilling - 45 deg off vertical (90 deg) Large Composite Fibre Sheave wheels for smoother operation and extended cable and sheave life Drill Shack Wind Walls Options On Deck Mud Tank Single Feed Cylinder Composite Feed Frame slides and stops for smooth operation and wear reduction 11

12 Parts & Equipment Canadian Recon carries a wide variety of parts and equipment. We provide stock items such as pumps, valves, and motors, as well as custom built equipment including fly baskets, fly frames, tool boxes, tanks, and custom enclosures. If you have an upcoming project with site specific needs or challenges, give us a call and we can help Heaters Ultra Modern welding & fabrication shop CNC Machining 12

13 Custom Enclosures Canadian Recon builds a large variety of custom enclosures and environmentally friendly tanks that are flyable. 13

14 Drilling Tools & Equipment Canadian Recon manufactures and supplies a wide range of top quality, precision machined tooling. All tools are made with the best quality materials available, by the best machinists available. We also stock a large inventory of replacement and repair parts. 14

15 Drilling Tools & Equipment Drill Rod & Casing Full line of Wire line Drill Rod, Standard Drill Rod and Flush Joint Casing. All standard lengths available. W Series WT Series J Series Wire line Rod Coring Barrels & Accessories Complete Line of Core Barrels, Parts and Accessories. Conventional, Wire line, and our own Long Box Series for Complete Barrels Overshots & Parts Heads Complete Stop Rings Head Rebuild Parts Stabilizers Inner & Outer Tubes Lifter Cases Locking & Adapter Couplings Core Lifters Diamond Products Dimatec Precision Diamond Products. Known the world over Impregnated Bits Casing Shoes Surface Set Bits Rod Shoes Carbide Bits Reaming Shells To see their Quality, Consistency, Service and Support. Visit 15

16 Tools & Accessories We have a large Inventory of additional tools and equipment. All made from top quality stock and Heat Treated where applicable. Standard Sizes, Custom Machined or Built to Order. Subs & Couplings Soil Sampling Tools& Equipment Pins & Adapters Water Swivels Hoisting Plugs Supply Pumps Tri Cones Mud Tanks & Tubs Roller Bits Equipment Enclosures Drive Heads Quality, Consistency, and Service, that s Canadian Recon Manufacturing! We use only the best materials, the most skilled craftsmen and years of field experience BUILT BY DRILLERS FOR DRILLERS 16