N&N Drilling Supply Mfr. (800)
|
|
|
- Vivian Bryan
- 5 years ago
- Views:
Transcription
1 W FLUSH JOINT CASING Casing Description Length Part# Weight (Lb) AW 1 12-AWFJC-1 4 AW 2 12-AWFJC-2 7 AW 3 12-AWFJC-3 11 AW 5 12-AWFJC-5 19 AW AWFJC BW 1 12-BWFJC-1 7 BW 2 12-BWFJC-2 15 BW 3 12-BWFJC-3 22 BW 5 12-BWFJC-5 35 BW BWFJC NW 1 12-NWFJC-1 9 NW 2 12-NWFJC-2 18 NW 3 12-NWFJC-3 27 NW 5 12-NWFJC-5 43 NW NWFJC HW 1 12-HWFJC-1 12 HW 2 12-HWFJC-2 24 HW 3 12-HWFJC-3 37 HW 5 12-HWFJC-5 60 HW HWFJC PW 1 12-PWFJC-1 14 PW 2 12-PWFJC-2 29 PW 3 12-PWFJC-3 44 PW 5 12-PWFJC-5 70 PW PWFJC SW 1 12-SWFJC-1 21 SW 2 12-SWFJC-2 42 SW 3 12-SWFJC-3 63 SW 5 12-SWFJC SW SWFJC * Also available with L.H. threading. * Also available in B-1
2 W FLUSH JOINT CASING (METRIC) Casing Description Length Part# Weight (Lb) AW 0.75M 12-AWFJC-0.75M 7 AW 1.50M 12-AWFJC-1.50M 18 AW 3.00M 12-AWFJC-3.00M 36 BW 0.75M 12-BWFJC-0.75M 14 BW 1.50M 12-BWFJC-1.50M 34 BW 3.00M 12-BWFJC-3.00M 70 NW 0.75M 12-NWFJC-0.75M 17 NW 1.50M 12-NWFJC-1.50M 42 NW 3.00M 12-NWFJC-3.00M 85 HW 0.75M 12-HWFJC-0.75M 23 HW 1.50M 12-HWFJC-1.50M 58 HW 3.00M 12-HWFJC-3.00M 117 PW 0.75M 12-PWFJC-0.75M 28 PW 1.50M 12-PWFJC-1.50M 69 PW 3.00M 12-PWFJC-3.00M 142 SW 0.75M 12-SWFJC-0.75M 41 SW 1.50M 12-SWFJC-1.50M 99 SW 3.00M 12-SWFJC-3.00M 200 * Also available with L.H. threading. * Also available in B-2
3 WT FLUSH JOINT CASING Casing Description Length Part# Weight (Lb) BWT 1 12-BWTFJC-1 7 BWT 2 12-BWTFJC-2 15 BWT 3 12-BWTFJC-3 22 BWT 5 12-BWTFJC-5 36 BWT BWTFJC NWT 1 12-NWTFJC-1 9 NWT 2 12-NWTFJC-2 18 NWT 3 12-NWTFJC-3 27 NWT 5 12-NWTFJC-5 43 NWT NWTFJC HWT 1 12-HWTFJC-1 12 HWT 2 12-HWTFJC-2 24 HWT 3 12-HWTFJC-3 37 HWT 5 12-HWTFJC-5 60 HWT HWTFJC PWT 1 12-PWTFJC-1 16 PWT 2 12-PWTFJC-2 33 PWT 3 12-PWTFJC-3 49 PWT 5 12-PWTFJC-5 81 PWT PWTFJC SWT 1 12-SWTFJC-1 21 SWT 2 12-SWTFJC-2 42 SWT 3 12-SWTFJC-3 63 SWT 5 12-SWTFJC SWT SWTFJC * Also available with L.H. threading. * Also available in B-3
4 WT FLUSH JOINT CASING (METRIC) Casing Description Length Part# Weight (Lb) BWT 0.75M 12-BWTFJC-0.75M 14 BWT 1.50M 12-BWTFJC-1.50M 35 BWT 3.00M 12-BWTFJC-3.00M 70 NWT 0.75M 12-NWTFJC-0.75M 17 NWT 1.50M 12-NWTFJC-1.50M 42 NWT 3.00M 12-NWTFJC-3.00M 84 HWT 0.75M 12-HWTFJC-0.75M 23 HWT 1.50M 12-HWTFJC-1.50M 59 HWT 3.00M 12-HWTFJC-3.00M 117 PWT 0.75M 12-PWTFJC-0.75M 32 PWT 1.50M 12-PWTFJC-1.50M 80 PWT 3.00M 12-PWTFJC-3.00M 142 SWT 0.75M 12-SWTFJC-0.75M 41 SWT 1.50M 12-SWTFJC-1.50M 99 SWT 3.00M 12-SWTFJC-3.00M 200 * Also available with L.H. threading. * Also available in B-4
5 HEAT TREATED DRIVE SHOES / STEEL CASING CAPS S Drive Shoe HEAT TREATED DRIVE SHOES Description Part# Weight (Lb) AW 16-AWDS 2 BW 16-BWDS 3 BWT 16-BWTDS 3 NW 16-NWDS 4 NWT 16-NWTDS 4 HW 16-HWDS 7 HWT 16-HWTDS 7 PW 16-PWDS 15 PWT 16-PWTDS 15 SW 16-SWDS 20 SWT 16-SWTDS 20 * Also available with L.H. threading. Steel Casing Cap STEEL CASING CAPS Description Part# Weight (Lb) AW 16-AWCP 3 BW 16-BWCP 5 BWT 16-BWTCP 5 NW 16-NWCP 6 NWT 16-NWTCP 6 HW 16-HWCP 8 HWT 16-HWTCP 8 PW 16-PWCP 10 PWT 16-PWTCP 10 SW 16-SWCP 15 SWT 16-SWTCP 15 * Also available with L.H. threading. B-5
6 BW CASING CUTTER Retaining Ring Plunger Case ASSEMBLY Description Part# Weight (Lb) Casing Cutter Assy BW CASING CUTTER APPLICATIONS Stainless Steel Ball Water Tube Used for cutting BW Casing or NWL Rod at any point in a drill hole when the entire string cannot be retrieved. BWL Rod Box Connection Plunger Shear Pin Spring Spring Rest Body Casing Cutter Pin (2) Set Screw Casing Cutter Lug (2) B-6
7 NW CASING CUTTER Retaining Ring Plunger Case ASSEMBLY Description Part# Weight (Lb) Casing Cutter Assy NW CASING CUTTER APPLICATIONS Stainless Steel Ball Water Tube Used for cutting NW Casing or HWL Rod at any point in a drill hole when the entire string cannot be retrieved. NWL Rod Box Connection Plunger Shear Pin Spring Spring Rest Body Casing Cutter Pin (2) Set Screw Casing Cutter Lug (2) B-7
8 HW CASING CUTTER ASSEMBLY Description Part# Weight (Lb) Casing Cutter Assy Plunger Retaining Ring Stainless Steel Ball HW CASING CUTTER APPLICATIONS Used for cutting HW / HWT Casing at any point in a drill hole when the entire string cannot be retrieved. HWL Rod Box Connection Shear Pin Spring Body Casing Cutter Lug (2) Casing Cutter Pin (2) B-8
9 PW CASING CUTTER ASSEMBLY Description Part# Weight (Lb) Casing Cutter Assy Sub PHD Rod Box X HWL Rod Pin Retaining Ring Stainless Steel Ball PW CASING CUTTER APPLICATIONS Used for cutting PW / PWT Casing at any point in a drill hole when the entire string cannot be retrieved. PHD Rod Box Connection Shear Pin Plunger Spring Body Casing Cutter Lug (2) Casing Cutter Pin (2) B-9
10 BW CASING ADVANCER Assemblies A B ASSEMBLIES Group Description Part# A Casing Advancer Assy B Inner Assy Loading Sleeve Spearhead Disk Lock Washer Release Shaft Driver Latch Body Spring (2) Latch Shoe (2) Stop Latch Set Locating Pin (2) Stop Latch Pin Split Cotter Pin (2) Stop Latch Spring Spacer Set Bit Sub B-10
11 NW CASING ADVANCER Assemblies A B ASSEMBLIES Group Description Part# A Casing Advancer Assy B Inner Assy Loading Sleeve Spearhead Disk Lock Washer Release Shaft Driver Latch Body Spring (2) Latch Shoe (2) Stop Latch Set Locating Pin (2) Stop Latch Pin Split Cotter Pin (2) Stop Latch Spring Spacer Set Bit Sub B-11
12 HW CASING ADVANCER Assemblies A B ASSEMBLIES Group Description Part# A Casing Advancer Assy B Inner Assy Loading Sleeve Spearhead Disk Lock Washer Release Shaft Driver Latch Body Spring (2) Latch Shoe (2) Stop Latch Set Locating Pin (2) Stop Latch Pin Split Cotter Pin (2) Stop Latch Spring Spacer Set Bit Sub B-12
13 PW CASING ADVANCER Assemblies A B ASSEMBLIES Group Description Part# A Casing Advancer Assy B Inner Assy Loading Sleeve Spearhead Disk Lock Washer Release Shaft Driver Latch Body Spring (2) Latch Shoe (2) Stop Latch Set Locating Pin (2) Stop Latch Pin Split Cotter Pin (2) Stop Latch Spring Spacer Set Bit Sub B-13
14 HWT CASING ADVANCER Assemblies A B ASSEMBLIES Group Description Part# A Casing Advancer Assy B Inner Assy Loading Sleeve Spearhead Disk Lock Washer Release Shaft Driver Latch Body Spring (2) Latch Shoe (2) Stop Latch Set Locating Pin (2) Stop Latch Pin Split Cotter Pin (2) Stop Latch Spring Spacer Set Bit Sub B-14
15 PWT CASING ADVANCER Assemblies A B ASSEMBLIES Group Description Part# A Casing Advancer Assy B Inner Assy Loading Sleeve Spearhead Disk Lock Washer Release Shaft Driver Latch Body Spring (2) Latch Shoe (2) Stop Latch Set Locating Pin (2) Stop Latch Pin Split Cotter Pin (2) Stop Latch Spring Spacer Set Bit Sub B-15
16 WASH TEES CASING WASH TEES Description Part# Weight (Lb) AW 18-AW-WSHT 6.1 BW 18-BW-WSHT 11.8 BWT 18-BWT-WSHT 11.8 NW 18-NW-WSHT 14.0 NWT 18-NWT-WSHT 14.0 HW 18-HW-WSHT 19.1 HWT 18-HWT-WSHT 19.1 PW 18-PW-WSHT 23.0 PWT 18-PWT-WSHT 23.0 SW 18-SW-WSHT 31.6 SWT 18-SWT-WSHT 31.6 NPT Male Connection * Also available with L.H. threading. WIRELINE WASH TEES Description Part# Weight (Lb) AWL 18-AWL-WSHT 6.1 BWL 18-BWL-WSHT 7.5 NWL 18-NWL-WSHT 9.2 HWL 18-HWL-WSHT 13.0 PHD 18-PHD-WSHT 19.2 ATW 18-ATW-WSHT 5.1 BTW 18-BTW-WSHT 6.5 NTW 18-NTW-WSHT 8.9 HTW 18-HTW-WSHT 12.6 * Also available with L.H. threading. B-16
17 HEAVY DUTY CASING RETRIEVER ASSEMBLIES Casing Description Part# Weight (Lb) Cap Screw & Lock Washer NW Retriever Assy HW Retriever Assy PW Retriever Assy Cap REPLACEMENT JAWS NW Set of Jaws HW Set of Jaws PW Set of Jaws Jaw (2) Body B-17
18 CASING SPECIFICATIONS Size AW BW NW HW PW SW * Material: 4130 W FLUSH JOINT CASING O.D. I.D. Threads Weight Inches MM Inches MM Per Inch Lb / 10 Ft Kg / 3 M Size BWT NWT HWT PWT SWT * Material: 4130 WT FLUSH JOINT CASING O.D. I.D. Threads Weight Inches MM Inches MM Per Inch Lb / 10 Ft Kg / 3 M B-18
TABLE OF CONTENTs DIAMOND TOOLS DOWN THE HOLE PUMPS DRILLING ADDITIVES & LUBRICANTS SURVEY SYSTEMS ACCESSORIES GEOTECHNICAL EQUIPMENT
TABLE OF CONTENTs DIAMOND TOOLS DOWN THE HOLE DRILL rigs PUMPS DRILLING ADDITIVES & LUBRICANTS SURVEY SYSTEMS Denver, Colorado, United States, 2008 Jeff Deel ACCESSORIES GEOTECHNICAL EQUIPMENT WWW.FORDIA.COM
Soil Investigation Tools Catalogue
Soil Investigation Tools Catalogue 2012 KUVAWALA CORE DRILL EQPT. PVT. LTD. QUALITY RUNS DEEP www.kuvawalacoredrill.com INDEX TUNGSTEN CARBIDE BITS DRILL RODS SOIL SAMPLING CORE BARRELS SPLIT TUBE SAMPLER
MINING & DRILLING PRODUCTS. N3 Core Retrieval System
MINING & DRILLING PRODUCTS N Core Retrieval System CORE BARREL ASSEMBLY, N - - 090 Core Barrel Assembly, 0 ft (.0 m) - - 09 Core Barrel Assembly, ft (. m) - - 09 Inner Tube Assembly, 0 ft (.0 m) - - 09
MINING & DRILLING PRODUCTS. N2U Core Retrieval System
MINING & DRILLING PRODUCTS NU Core Retrieval System CORE BARREL ASSEMBLY, NU -0-009 Core Barrel Assembly, 0 ft (.0 m)* -0-009 Core Barrel Assembly, ft (. m)* -0-009 Inner Tube Assembly, 0 ft (.0 m)* -0-009
MISCELLANEOUS. We manufacture and resell
MISCELLANEOUS Oil mats Displacement plugs VAN RUTH Cementing and Wedging Plugs Rod and casing cutter 3 chuck jaws 6 Reamer assembly 6 Inner tube clinometer Cable clevis 8 Pressure relief valve We manufacture
MINING & DRILLING PRODUCTS. P Core Retrieval System
MINING & DRILLING PRODUCTS P Core Retrieval System CORE BARREL ASSEMBLY, P -0-0 Core Barrel Assembly, 0 ft (.0 m) -0-0 Core Barrel Assembly, ft (. m) -0-0 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner Tube
MINING & DRILLING PRODUCTS DRILL ROD AND CASING. Parallel Wall Drill Rod LITE Drill Rod Thin Wall Drill Rod Casing Adaptor Subs.
MINING & DRILLING PRODUCTS DRILL ROD AND CASING Parallel Wall Drill Rod LITE Drill Rod Thin Wall Drill Rod Casing Adaptor Subs www.di-corp.com DOWN TO EARTH BUSINESS AT DI-CORP, WE HAVE PROUDLY DEVELOPED
Continuous Sampling OVERSHOT STYLE ROD STYLE SWIVEL OVERSHOT ASSEMBLY CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY
ROD STYLE OVERSHOT STYLE OVERSHOT ASSEMBLY SWIVEL CONNECTING ROD NWJ J SERIES LATCH HOUSING LATCH ASSEMBLY BEARING ASSEMBLY SAMPLE BARREL SPLIT OR SOLID SHOE Split Barrel Sampler Assemblies Continuous
Overshots. Drill Rods. Casing. Tools 12/06-MKT1644 P/N M
REV 0-DEC-06 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Diamond Products Impregnated Bits Reaming
MINING & DRILLING PRODUCTS. B Core Retrieval System
MINING & DRILLING PRODUCTS B Core Retrieval System CORE BARREL ASSEMBLY, B -0-00 Core Barrel Assembly, 0 ft (.0 m) -0-00 Core Barrel Assembly, ft (. m) -0-00 Inner Tube Assembly, 0 ft (.0 m) -0-00 Inner
H Core Retrieval System
H Core Retrieval System Global Drilling Products Pte Ltd 9 Loyang Way, #0-0, Changi Logistics Centre Singapore 0 Telephone: + 9 info@globaldrillingproducts.com www.globaldrillingproducts.com Core Barrel
Overshots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
Introduction Augers. Inclinometer Casing. Subs & Pipe Wrenches. Samplers. Hoisting, Lowering, Hammers & Rockbits. Corebarrels, Drill Rods & Casings
Contents Introduction Augers Inclinometer Casing Subs & Pipe Wrenches Samplers Hoisting, Lowering, Hammers & Rockbits Corebarrels, Drill Rods & Casings Diamond Products Thin Wall Bits & Saw Blades Water
DRILL RODS ND COUPLINGS N&N Drilling Supply Mfr. (00) Drill Rod Complete with Coupling R-1 R-2 R-3 R-4 R-5 R RN3-1 RN3-2 RN3-3 RN3-4 RN
DRILL RODS ND COUPLINGS N&N Drilling Supply Mfr. (00) 334-492 Drill Rod Complete with Coupling R-1 R-2 R-3 R-4 R-5 R-10 4 10 13 R-1 R-2 R-3 R-4 R-5 R-10 23 R-1 R-2 R-3 R-4 R-5 R-10 2 32 2 R-1 R-2 R-3 R-4
CONTINUOUS FLIGHT AUGERS AND BITS
CONTINUOUS FLIGHT AUGERS AND BITS Hex-Tube Augers Available in Hole Sizes 2½ (6 mm) through 12 (05 mm) Hex Sized 1 / 16, 1 1 / 8, 1 5 / 8 and 2 (20.6 mm, 29 mm, 1 mm and 50.8 mm) Field replacement shank
Overshots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
TABLE OF CONTENTS DIAMOND TOOLS DOWN THE HOLE PUMPS DRILLING ADDITIVES & LUBRICANTS SURVEY SYSTEMS ACCESSORIES GEOTECHNICAL EQUIPMENT
TABLE OF CONTENTS DIAMOND TOOLS DOWN THE HOLE DRILL rigs PUMPS DRILLING ADDITIVES & LUBRICANTS SURVEY SYSTEMS Denver, Colorado, United States, 2008 Jeff Deel ACCESSORIES GEOTECHNICAL EQUIPMENT WWW.FORDIA.COM
Special Features. u Blanking plug seats in top of. u Bonded seal allows disconnects. and re-connects. u Right-hand or left-hand release
DT-2 On/Off Tool The D&L DT-2 On/Off Tool is a tubing seal receptacle allowing isolation of a lower zone using a wireline blanking plug. The tubing string can then be removed from the well. When re-run,
365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
Overshots. Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Overshots Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated
Nut The standard bottom nut is a bullnose nut. Optional nut types, sub, mill, and side hill, are available.
Overview Logan Releasing Spears provide a positive means to engage and retrieve an internal fish from the well. The design of this rugged, dependable, and inexpensive internal catch fishing tool ensures
C SERIES WIRELINE CORING SYSTEM WUXI DRILLING TOOLS FACTORY. Introduce to C series core barrels
C SERIES WIRELINE CORING SYSTEM WUXI DRILLING TOOLS FACTORY Introduce to C series core barrels C-series wireline core barrel designed by WUXI DRILLING TOOLS FACTORY,JINSANJIAO(short for JSJ) is our brand,introduces
Models 642E, 642F, 662E, 644E, 664F, & 6A4E
Models E, F, E, E, F, & AE 0 0 0 0 Models E, F, E, E, F, & AE. -0 Lock Jam Nut /-. -0 Flat Idler. -B Auger Idler Arm. 0-0A Hex Cap Screw /- x.0. -0 Bushing. -0 Bell Washer. -00 Hex Nut /-. -0 Hex Lock
HUSKY DRILL RODS & CASING
BWL NWL HWL HUSKY DRILL RODS & CASING TRIED AND TESTED BY DRILL CREWS FOR TROUBLE-FREE DRILLING Husky drill rods and casing are quality-crafted in DCDMA standard sizes using superior alloy steel, with
Express Series Multi Configuration Composite Body Bridge / Frac Plugs
Multi Configuration Composite Body Bridge / Frac Plugs The Express Series Bridge and Frac Plugs utilize a unique combination of composites to provide a dependable, durable, and cost-efficient method for
PIPE HANDLING & HOISTING. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
PIPE HANDLING & HOISTING MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com PIPE HANDLING & HOISTING TABLE OF CONTENTS PIPE HANDLING & HOISTING OVERVIEW... HOISTING PLUGS...-7
This group contains information on the coach parking brake from the actuating lever to the transmission. ...Parking Brake Cables and Hardware
Group 0 Parking Brake GENERAL: This group contains information on the coach parking brake from the actuating lever to the transmission. SPECIFICS: As applicable...parking Brake Cables and Hardware...Parking
Drill Rods. Casing. Tools 08/05-MKT1565 P/N L
REV 0-NOV-05 Diamond Products Core Barrels Drill Rods Water Swivels Hoisting Plugs Casing Recovery Tools Adapter Subs Conversion Kits Tools Technical Data Safety Poster Diamond Products Impregnated Bits
Auto Air Valve Parts List
Auto Air Valve Parts List 1 Cap 1 2 O Ring 1 3 Cover 1 4 Lock Nut 5/16 UNF 1 5 Flat Washer 8mm 2 6 Flat Washer 2 7 Diaphragm 1 8 Guide bush 1 9 O Ring 1 10 O Ring 1 11 Shaft 1 12 Flat Washer 1 13 Seat
ILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS:
IPL MODEL SWZ 71 9 7 5 55 7 5 4 75 ILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: SWZA-15KA with a serial number of 900001 to 909999 SWZ48A-17KA with a serial number
Spearhead Multicut 460 MULTICUT th Edition - July 2015 Part No
MULTICUT 460 14 th Edition - July 2015 Part No. 8999023 1 Spearhead Multicut 460 Parts Book 14 th Edition July 2015 Spearhead Machinery Ltd Green View Salford Priors Evesham Worcestershire WR11 8SW Tel:
Model Series E6A5E, E645E & E665E
Model Series EAE, EE & EE 0. -0 Housing R.H. -0 Housing L.H.. 0-0 Hex Screw /- x.. -0A Spiral Axle -00A Spiral Axle. -0 Key. -0 Pin-Spiral. -0 Shaft-Worm. -0 Gear-Worm. -0 Collar-Thrust. -0 Plug 0. -0
Lotus Europa S1/S2 Parts Manual - Section CA - Suspension - Front - Page 1
Lotus Europa S1/S2 Parts Manual - Section CA - Suspension - Front - Page 1 Lotus Europa S1/S2 Parts Manual - Section CA - Suspension - Front - Page 2 Item Lotus # Description Change Point Notes Bulletin
MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES
MOTION DECOUPLED HYDRAULIC DELIVERY SYSTEM (MDHDS) ASSEMBLY AND DEPLOYMENT PROCEDURES Prepared for the University of Texas by Pettigrew Engineering, PLLC Tom Pettigrew, PE President Revision: 5 15 October
Parts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 6/2010 Shown with OPTIONAL Grass Collection System 2010 Wright Manufacturing Inc., All Rights
Tubing Cutters No. 101 Tubing Cutter Spare Cutter Wheel NOTE: Order parts by Catalog Number only. DO NOT order by Reference Number. Ref.
No. 0 Tubing Cutter Wheel Housing 0 Cutter Wheel Pin and Clip (Incl. Ref. No. ) E Cutter Wheel Stop Pin 0 Roll () Roller Pin () 0 Screw w/washer Knob Retaining Ring 0 Feed Screw Thrust Washer Roll Housing
SPARE PARTS BOOK. Front Axle SSND-10-S. Book No. 159 (2/2008)
SPARE PARTS BOOK Sisu Axles, Inc. Autotehtaantie 1 PO Box 18 FIN- Hameenlinna Finland Phone +58 0 55 Fax +58 0 55 00 16.8.01 1 Axle L658 8 7 1 6 5 6 7 8 0 1 1 5 1 17 1 15 7 0 1 18 1 0 1 16 5 6 8 7 SSNDA.DS
ILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS:
IPL MODEL SWZU 71 7 7 7 ILLUSTRATED PARTS LIST 70 7 THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: SWZUA-KAI with a serial number of C00001 to C SWZUV-17KAI with a serial number of C00001
Models E640F, E660F, E6C0F & E660G
Models E0F, E0F, EC0F & E0G 0 0 0 0 0-0 Lock Jam Nut /- -0 Flat Idler -B Auger Idler Arm 0-0A Hex Cap Screw /- x.0-0 Shoulder Screw -0 Flat Washer,. x. x.0-0 Extension Spring -0 Hex Nut /- -00 Hex Nut
Full Flow Reverse Circulation Junk Baskets. Manual B320
Full Flow Reverse Circulation Junk Baskets Manual B320 CONTENTS Logan Full Flow Reverse Circulation Junk Basket Overview... 2 Uses... 2 Construction... 2 Tool Illustration... 3 Operation... 4 Recovering
Parts List for all Sentar Sport models For Sentar Sport serial #33615 and higher until superseded
Parts List for all Sentar Sport models For Sentar Sport serial #33615 and higher until superseded WRIGHT MANUFACTURING, INC. - 4600X WEDGEWOOD BLVD - FREDERICK, MD 21703 Revised 01/2007 36" CUTTER DECK
Side Feeds * 6RG * 12RG * 20RG * 4.5PE * 5.0PE * 30RG * 7RG * 8.0PE * 13RG * 5.7PE * 4.5RG * 8K * 9.7PE
Prices Effective May 15, 2008 * 6RG * 30RG * 8.0PE * 8K * 9.7PE Side Feeds * 12RG * 4.5PE * 7RG * 4.5RG * 20RG * 5.0PE * 13RG * 5.7PE 7015 Old Hwy 105 W. Conroe, TX 77304 Office (936) 588-3033 Fax (936)
Technical Service Information
Technical Service Information VOLVO/SAAB AW0-4LE VALVE BODY EXPLODED VIEWS AND IDENTIFICATION OF COMPONENTS Refer to Figure 1 for Solenoid identification and locations on the valve body. Refer to Figure
Internal Pressure Pipe Cutters. Manual E540
Internal Pressure Pipe Cutters Manual E540 Contents Logan Internal Pressure Pipe Cutters Overview...2 Uses...2 Construction...2 Tool Illustration...3 Operation...2 Single Cut from a Fixed Platform... 2
Drop-In Inside Blowout Preventer Valve
Drop-In Inside Blowout Preventer Valve Disassembly and Assembly Procedures Global Manufacturing, Inc. Lafayette, Louisiana USA 70508 Ph (337) 237-1727 Fax (337) 232-9353 Disassembly and Assembly Procedures
Parts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 9/2007 Shown with OPTIONAL Grass Collection System 2006 Wright Manufacturing Inc., All Rights
25-4. Key No. Part No. Description Key No. Part No. Description WASHER,.31X.58X x97 BOLT, CARRIAGE 5/16-18
ENGINE 2 19 23 20 6 25-2 22 27 16 25-5 25-1 25-3 8 22 22 24 5 10 18 24 25-4 12 26 14 25-2 Ref. Drive Page 25-2 3 Ref. Auger Housing Page Key No. Part No. Description Key No. Part No. Description 2 - -
SUBSEA CONTROL VALVE - SPM
PART NO. AG20-0100 ¾ SPM VALVE Assy. ¾ Sub-Plate Mtd. AG20-0100 Control Valve Assy. ¾ Sub-Plate Mtd. Control AG20-0200 Valve with Long Spacer Assy. ¾ Individual Pocket Only AG20-0220 Kit Repair Kit AG20-0199
ENGINE. Ref. Drive Page. Ref. Auger Housing Page
ENGINE 16 2 1 5 25--2 20 22 24 12 17 18 25--1 10 13 14 15 6 25--3 4 7 11 23 8 25--2 26 25--4 9 3 Ref. Drive Page Ref. Auger Housing Page Key No. Part No. Description Key No. Part No. Description 1 6219
LARGE FRAME REAR TINE TILLERS SERIES 2
Parts Manual for LARGE FRAME REAR TINE TILLERS SERIES 2 MODEL R5002B R5002R R8002B R8002BE RT5 RT5X RT8 RT8S McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision
SECTION VIII: TEST TOOLS and CHECK VALVES
INDEX of SECTION VIII: PRODUCT DESCRIPTION Code Page TEST TOOLS, VIII-0-10 ROTFB-2 12 1,2 ROTRB-2 12 3,4 ROTN 14 5,6 ROTR 14 7 ROTX 14 8 POR - PORN and POX - POXN 14 9 CVR - CVRN and CVX - CVXN Check Valve
A DIVISION OF DOUGLAS DYNAMICS, L.L.C.
April, 00 Lit. No. 0686, Rev. 05 SPEEDWING Snowplow 8600SW Snowplow Parts List A DIVISION OF DOUGLAS DYNAMICS, L.L.C. Lit. No. 0686, Rev. 05 April, 00 BLADE COMPONENTS... OFF-TRUCK COMPONENTS...5 Pivot
Hydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter
Main Components Early Style
Pipe & Bolt Threading Machine Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure
York J Model Compressors Unloading Characteristics Styles A-F Solenoid Valve
Styles A-F Solenoid Valve Loaded - De-energized Crankcase Access Cover Oil Pressure Supply Oil Supply Valve Spring, Washer/Keeper Valve Rod and Disk To Unloading Cylinder Plunger Plunger Disk Crankcase
TT8101 Rotary Tedder
TT0 Rotary Tedder Illustrated Parts Breakdown Page Front End Page Page Transport Axle Assembly Cylinder Linkage Page Guards Page Page Page Page Transport Lock Assembly Lift Frame Assembly Center Tunnel
SPARE PARTS BOOK. Front Axle SSDP-12-S. Book No. 209 (4/2010)
SPARE PARTS BOOK Front Axle Sisu Axles, Inc. Autotehtaantie 1 PO Box 189 FIN-13101 Hameenlinna Finland Phone +8 20 2999 Fax +8 20 2900 16.8.2012 1 Axle L96 2 22 2 7 8 9 10 20 21 1 26 27 22 2 23 19 13 21
ILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS:
IPL MODEL SWZU 1 6 2 6 6 6 6 ILLUSTRATED PARTS LIST 0 2 6 8 THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: SWZU6-1KA with a serial number of 260001 to 26 SWZU8-1KA with a serial number of
ULTRALITE SPACEMATIC. Nutplate Drillmotor II/IIB DRILLING MACHINES
SPACEMATIC TM ULTRALITE DRILLING MACHINES Nutplate Drillmotor II/IIB One hand operation to locate, drill and countersink both rivet holes in a single 4 second operation. Tool is easily converted from one
Parts List Wright Stander Rapid-Hite Mower (For Serial Numbers and Higher Until Superseded)
Parts List Wright Stander Rapid-Hite Mower (For Serial Numbers 33615 and Higher Until Superseded) Replace with newer revisions as they become available 2007 Wright Manufacturing, Inc. All rights reserved
2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
Retriever 5100G/P. 11/89 revised 10/02 FORM NO
Retriever 5100G/P PARTS LIST Advance MODELS 56497000, 56497010 This parts list is for machines after serial number 353005 All models covered in this manual are OBSOLETE 11/89 revised 10/02 FORM NO. 56042216
ILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS:
IPL MODEL SWZU 71 9 72 1 5 55 7 5 4 75 ILLUSTRATED PARTS LIST 70 54 2 5 58 59 57 THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: SWZUA-15KA with a serial number of A200001 to A299999 SWZU48A-17KA
33 COMPACT DISC Ref. No. Part Name Part Number
CONTENTS CONTENTS 33 COMPACT DISC Ref. Part Name Part Number 1 Tire & Rim 168025 2 Disc Axle 401036 3 Plastic End Cap (Pkg. 2) 504090 4 Sealed Bearings & Flanges 504125 5 Bearing Stand Bolt Pkg. (2-U-Bolts)
MWD Components Ceramic & Carbide Parts MWD Electronics Running Gear Handling Equipment Drill Pipe Screens Float Valves Repair Kits Job Boxes Gamma
Float Valves Repair Kits Excellence in Energy Services for over years www.huntingplc.com Drilling drilling.tools@hunting-intl.com specialty.supply@hunting-intl.com www.hunting-intl.com/titan/contact-titan
WX980 Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (9) 99-983 Fax: (9) 99- www.embmfg.com WX980 Trailer Log Splitter Parts Manual S/N E9US0ES3809 & After 3809 & After Refer to the operators
Illustrated Parts: Flail Mower (BladeRunner) 24 & 30
Illustrated Parts: Flail Mower (BladeRunner) 24 & 30 Revised 7/10/2017 BCS America 5001 N Lagoon Portland, OR 97217 www.bcsamerica.com Phone: 800-543-1040 Fax: 800-777-7069 Flail Mower 24" & 30" Gear Box
BUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: 405 / 406 SECTION: 17
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 / 0 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER,
PD-752. The Gledhill Road Machinery Co. ALWAYS INCLUDE SERIAL NO. OF PLOW WHEN ORDERING PARTS STD. MUSHROOM SHOE ASS Y P/N 7230-A11 MUSHROOM SHOE
STD. MUSHROOM SHOE ASS Y P/N 7230-A11 ITEM PART # QTY. DESCRIPTION 1 351-C 1 CRANK W/KNOB 2 5308-A393 1 BOLT ASS Y 3 5750-A2 1 CRANK COLLAR 4 6611-A 1 2-1/2 SHOE HOUSING 5 5308-A4 4 BOLT ASS Y 6 5750-A
21" STEEL DECK WALK BEHIND COMMERCIAL MOWERS SERIES 19
Parts Manual for 21" STEEL DECK WALK BEHIND COMMERCIAL MOWERS SERIES 19 MODEL CP215519HV CP216019KWV CRP216019KWV McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED.
Key No. Part No. Description Key No. Part No. Description ENGINE
ENGINE 16 2 5 25-2 20 22 24 12 17 18 25-1 10 13 14 15 25-3 ÁÁ 6 4 11 7 23 8 25-2 20-5 25-4 9 3 Ref. Drive Page Ref. Auger Housing Page Key No. Part No. Description Key No. Part No. Description 2 - - -
Liftgate Terminology
SL-20 Series SL-20 Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco
COILED TUBING TOOLS SALE RENTAL - LEASE
COILED TUBING TOOLS SALE RENTAL - LEASE GTECH Energy Services LLC 67 Pinepath Pl. Spring, Texas 77381 PH: 713-703-2959 Fax: 713-510-1802 sales@gtechenergyservices.com SALES@GTECHENERGYSERVICES.COM 1 PRODUCT
Parts Manual DX272 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual DX22 / 966651501 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
SPEEDWING Snowplow. Model 8600SW Blade Crate Assembly Big Box Assembly Parts List
May 1, 01 Lit. No. 0686, Rev. 11 SPEEDWING Snowplow Model 8600SW Blade Crate Assembly 5750-1 Big Box Assembly 5755 Parts List This Parts List is for BLIZZARD SPEEDWING snowplows with serial numbers beginning
TECHNICAL DATA BROCHURE ZTR 308/3II
Date 8/84 Page 1 of 6 TECHNICAL DATA BROCHURE ZTR 308/3II IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATION OR MAKING ADJUSTMENTS. ' Seat Adjustment Loosen bolts on sliding brackets under each side of
Parts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.
Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,
PARTS MANUAL. HD4SR and 12SR Auto Align Bale Skoop to 2017 K
PARTS MANUAL 1998 to 2017 HD4SR and 12SR Auto Align Bale Skoop K34991-04 Table of Contents Section 1: Parts Breakdown...1-1 Bale Skoop Final Assembly... 1-2 Loader Assembly... 1-4 12SR - Grab Hook Assembly
Parts Manual SPEEDZTR 30 /
Parts Manual SPEEDZTR 30 / 966676201 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
Parts Manual RZ4216 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual RZ4216 / 6645501 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,
Illustrated Parts Manual
Illustrated Parts Manual 00 Series Snow Thrower Two Stage MTD LLC, P.O. BOX 331 CLEVELAND, OHIO 13-001 Printed In USA Form No. -033 (August 2, 200) Auger & Auger Housing 5 1 1 13 3 25 23 1 15 53 1 2 22
Drill Serial Number Range: LF90C thru current
Drill Serial Number Range: LF90C- 2011-001 thru current For Drill Build: DRILL MODULE, LF90C (3549226 Rev: D) Document Number: 5400780 Rev. B Effective Date: 1- Jan- 2011 KIT SUMMARY 1 102629 KIT, BASE
1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
19.02 p1 08/01 MOWER DECK, 72"
19.02 p1 0/01 MOWER DECK, 72" 19.02 p1 0/01 MOWER DECK, 72" REF FN PART NUMBER YR/SN QTY DESCRIPTION 1 1, 2 AUB160499 From 10/9 1 CUTTER BOX Deck, Mower, 72" 1 3 AUB161157 From 01/93 1 DECK, MOWER Deck,
WX960 Trailer Log Splitter Parts Manual. S/N & After
WX960 Trailer Log Splitter Parts Manual S/N 36000 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and
530B ECOLO-TIGER MULCH CHISEL WARNING AND TAILIGHT KIT ECOLO-TIGER 530B
04-01 WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 04-01 WARNING AND TAILIGHT KIT ECOLO-TIGER 530B 2 27602311 1 HARNESS, WIRE, Front 3 27602221 1 HARNESS, WIRE, Rear (530B) 4 27602202 2 LIGHT ASSY., Red 5
Form 7-53, 11-15c Supersedes Form 7-53, 03-13c Sheet 1 of , Swing Air Jack Hunter Engineering Company
Form 7-53, 11-15c Sheet 1 of 8 133-84-1, 133-85-1 Swing Air Jack 2013-2016 Hunter Engineering Company 133-84-1, 133-85-1 Swing Air Jack REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING Form 7-53, 11-15c
ABS Pipe metric system Plain PN10
S Pipe metric system Plain PN10 t (mean) Da (min) Size Thickness Weight Length ode t Da mm kg/m m 16 1.5 0.07 3 11 565 305 20 1.6 0.10 3 11 565 306 25 1.9 0.14 3 11 565 307 35 2.1 0.21 3 11 565 308 16
RZ3016. Parts Manual. Zero Turn Mower /
Parts Manual RZ30 Zero Turn Mower / 966612302-04 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in
GEM Car Parts Direct
* * L0111-01163 ASSY, BRAKE PEDAL 05 1 * ASSY, SWITCH BRAKE (See following pages for breakdown of parts) 1 2 * ASSY, MASTER CYLINDER (See following pages for breakdown of parts) 1 3 0211-00116 WLDMT, BRAKE
SERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS ELECTRIC CHAIN HOISTS 9560, 9561, 9562, 9565, 9566, 9567,
SERVICE PARTS LIST PAGE 1 OF 5 BULLETIN NO. 54-02-1202 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS
TECHNICAL DATA BROCHURE - ZTR 424 & 427 DATE 8/85 PAGE 1 OF 8
TECHNICAL DATA BROCHURE - ZTR 424 & 427 DATE 8/85 PAGE 1 OF 8 IMPORTANT - READ OPERATOR'S MANUAL BEFORE OPERATION OR MAKING ADJUSTMENTS Deluxe Seat Adjustment Easy hand lever action allows forward and
AIRSHIRZ PARTS PART # DESCRIPTION
100315 POWER UNIT, POULTRY, XXLARGE CYLINDER 108171 POWER UNIT LARGE CYLINDER 108172 POWER UNIT SMALL CYLINDER 108476 POWER UNIT X-LARGE CYLINDER 108723 POWER UNIT XXLARGE CYLINDER 102473 BLADE ASSY, TABLE
601 N. Broadway Salina, KS Veris MSP3 EC/pH/OM Parts Manual
601 N. Broadway Salina, KS 67401 Veris MSP3 EC/pH/OM Parts Manual MSP3 Sub-Assemblies 2 Table of Contents MSP 3150 Base Unit... 4, 5 Coulter Assembly... 6, 7 ph Sampler... 8-10 Electrode Holder... 11,
Highline Manufacturing TopGun 1999 Page 1 A. TABLE OF CONTENTS... 1
Highline Manufacturing TopGun 1999 Page 1 A. Table of Contents A. TABLE OF CONTENTS... 1 B. ASSEMBLY & INSTALLATIONS... 3 1. FLAIL DRUM ASSEMBLY... 3 2. FLAIL DRUM INSTALLATION... 4 3. FEED ROLLER ASSEMBLY...
MODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO & UP MODEL NO.
9-0688 MODEL NO. 00-800 & UP MODEL NO. 0-800 & UP MODEL NO. 5-800 & UP MODEL NO. -800 & UP MODEL NO. 0-800 & UP SKID SPRAYER with the Centrifugal Pump FORM NO. 95-9095 SET-UP AND PARTS CATALOG SAFETY AND
XH1500/XH1000 S2 ROTARY CUTTERS PARTS MANUAL ATENCIÓN! LEA EL INSTRUCTIVO
Published: 0/0 XH00/XH000 S ROTARY CUTTERS S/N C00 C0 inclusive PARTS MANUAL C0-00P An Operators Manual with IMPORTANT Safety, Assembly, Operation and Maintenance information was packaged with this Parts
Lycoming AIRCRAFT ENGINES. IO-540-AC1A5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC
AIRCRAFT ENGINES IO-540-ACA5 Wide Series Flange Crankcase Model Engine PARTS CATALOG PC-5- November 008 Lycoming 5 Oliver Street Williamsport, PA 770 U.S.A. 570/33-8 IO-540-ACA5 PARTS CATALOG This illustrated
Parts Breakdown Capacity 10,000 lbs. (4,536 kg.) (400 Series Lift)
Parts Breakdown Capacity 10,000 lbs. (4,53 kg.) (400 Series Lift) LP002 August 201 by Vehicle Service Group. All rights reserved. CO57.4 PB002 Rev. M //201 ITEM PART# DESCRIPTION 1 TP10-1000 R.H. Column