Selection guide. High performance fluids for precise temperature control

Size: px

Start display at page:

Download "Selection guide. High performance fluids for precise temperature control"

Wendy Jackson
5 years ago
Views:

1 Selection guide High performnce s for precise temperture control

Estmn Therminol het trnsfer s TLC Totl Lifecycle Cre progrm Estmn offers fmily of Therminol het-stble s developed specificlly for indirect trnsfer of process het.

In properly designed systems, our s will perform within their expected temperture rnges nd provide excellent therml stbility.

Contct Estmn for detiled performnce informtion on specific Therminol het trnsfer s.

2 Estmn Therminol het trnsfer s TLC Totl Lifecycle Cre progrm Estmn offers fmily of Therminol het-stble s developed specificlly for indirect trnsfer of process het. Therminol het trnsfer s cn meet the operting needs of virtully ny single- or multiple-sttion het-using system. In properly designed systems, our s will perform within their expected temperture rnges nd provide excellent therml stbility. Therminol het trnsfer s, vilble in vrious formultions nd operting rnges, ll provide excellent benefits economy, efficient opertion, minimum mintennce, nd precise temperture control. Contct Estmn for detiled performnce informtion on specific Therminol het trnsfer s. Our TLC Totl Lifecycle Cre progrm is designed to support Therminol het trnsfer customers throughout their systems lifecycle. This comprehensive progrm includes system design support, strt-up ssistnce, trining, smple nlysis, flush nd refill s, nd more. In North Americ, cll our hotline t or contct your locl sles or technicl representtive found in the Contct us section of our website. System design support Estmn regulrly ssists some of the world s lrgest engineering, chemicl, nd equipment mnufcturing compnies on the design nd opertion of het trnsfer systems. Opertionl trining Estmn customers cn tke dvntge of our het trnsfer system opertion nd product trining progrms. These progrms re customized to suit the vried needs of front-line technicins, opertions supervisors, nd mintennce technicins to design engineers. Sfety wreness trining We provide our customers sfety wreness trining tht focuses on the design, strt-up, opertion, nd mintennce of het trnsfer systems. Liquid phse het trnsfer s Therminol liquid phse het trnsfer s operte over brod temperture rnge of 175 to 75 ( 115 to 40) nd most cn be used in nonpressurized systems. A mjor dvntge of liquid het trnsfer is lower-cost instlltion nd opertion. Cpitl cost is reduced by elimintion of lrge-dimeter piping, sfety vlves, stem trps, nd wter tretment fcilities. Operting cost is reduced by low mintennce requirements nd reduced mkeup. All Estmn Therminol het trnsfer s cn provide effective opertions in liquid phse. When bove their norml boiling points, Therminol D-12, LT, 59, 68, 72, 75, VP-1, nd VP-3 s require system pressures to be greter thn their vpor pressures for liquid phse opertion to their mximum bulk temperture rtings. Liquid/vpor phse het trnsfer s Therminol LT, VP-1, nd VP-3 re Estmn s liquid/vpor phse het trnsfer s. They offer brod operting temperture rnge nd uniform het trnsfer. Other mjor benefits include precise temperture control nd low mechnicl mintennce costs. Also, het trnsfer system tht utilizes vpor phse medium requires less thn comprble liquid phse system becuse the equipment fills with vpor insted of liquid. Specilty nd customized het trnsfer s In ddition to our bsic liquid phse nd liquid/vpor phse het trnsfer s, Estmn offers number of specilty s. We lso would be hppy to work with you in developing customized for your ppliction. In-service het trnsfer smple nlysis To help users get mximum life, Estmn offers testing of in-service het trnsfer s to detect contmintion, moisture, therml degrdtion, nd other conditions tht my impct system performnce. Customers cn ccess their specific test informtion vi the mytherminol site portl. Smple nlysis includes ll-inclusive smple kits tht re esy to use. Technicl service hotline Experienced technicl service specilists cn help nswer your questions regrding het trnsfer selection, system strt-ups, system design, nd opertionl issues. Strt-up ssistnce Estmn provides strt-up ssistnce by reviewing procedures nd offering suggestions to reduce typicl problems. Customers cn lso receive help by clling their locl Estmn technicl specilist or through on-site ssistnce. Flush nd refill systems cn be clened with Therminol FF flush. Therminol FF cn be circulted t tempertures up to 35 (177) nd is comptible with mechnicl system components nd perfluoroelstomer O-rings found in het trnsfer systems. Fluid trde-in progrm* As prt of our commitment to sustinbility nd the environment, Estmn offers trde-in progrm for used Therminol nd competitive het trnsfer s. *Fluid trde-in progrm vilble in North Americ.

3 English units VLT Very low-temperture coolnt/het trnsfer D-12 Low-temperture coolnt/ het trnsfer LT Wide-rnge liquid/ vpor het trnsfer ADX-10 Low-temperture pumpbility, medium-temperture RD Low-viscosity, medium-temperture Mx. bulk use temp, 350 Min. use temp, Mx. bulk use temp, 450 Min. use temp, Mx. bulk use temp, 600 Norml boiling pt. temp, 358 Min. use temp, Mx. bulk use temp, 480 Min. use temp, Mx. bulk use temp, 520 Min. use temp, Wter-white liquid Cler, wter-white liquid Cler, light yellow liquid Cler, ple yellow liquid Cler liquid Methylcyclohexne/trimethylpentne mixture 350ºF 410ºF 211 Synthetic hydrocrbons 450ºF 475ºF 378ºF Alkyl substituted romtic 600ºF 650ºF 358ºF Synthetic romtic hydrocrbon mixture 480ºF 535ºF 559ºF 520ºF 570ºF 541ºF (Re = 10,000, 10 ft/s, 1-in. tube) Kinemtic viscosity, cst (mm 2 /s) (Tg closed cup) 2 (ASTM D-1310) 562 (DIN 51794) d 137 d (Pensky-Mrtens) (DIN 51794) (crystllizing point) 134 (Pensky-Mrtens) (DIN 51794) ºF ºF 284ºF 621 (DIN 51794) 66ºF ºF ºF 257ºF 743 (DIN 51794) 90ºF Density t 75ºF (lb/gl) Density, vrious tempertures lb/gl 6.90 lb/gl 6.12 lb/gl 4.97 lb/gl 53.8 lb/ft lb/ft lb/ft lb/ft lb/gl 6.26 lb/gl 5.53 lb/gl 4.86 lb/gl 50.5 lb/ft lb/ft lb/ft lb/ft lb/gl 7.11 lb/gl 6.31 lb/gl 4.66 lb/gl 58.6 lb/ft lb/ft lb/ft lb/ft lb/gl 6.72 lb/gl 6.04 lb/gl 5.73 lb/gl 56.3 lb/ft lb/ft lb/ft lb/ft lb/gl 6.82 lb/gl 6.11 lb/gl 5.64 lb/gl 55.9 lb/ft lb/ft lb/ft lb/ft 3 Het cpcity, Btu/(lb ºF) Therml conductivity, Btu/(h ft ºF) Vpor pressure mmhg 643 mmhg 4,430 mmhg 1.77 psi 12.4 psi 85.7 psi mmhg 241 mmhg 1, mmhg psi 4.66 psi 34.8 psi mmhg 1,370 mmhg 11, mmhg 0.79 psi 26.5 psi 228 psi mmhg 72.4 mmhg 266 mmhg psi 1.40 psi 5.15 psi mmhg 78.6 mmhg 564 mmhg psi 1.52 psi 10.9 psi b Visit for dditionl typicl properties nd test vlues. c Check with your locl sles office to determine exct vilbility by country. d 5 for efficient het trnsfer

4 English units XP Het trnsfer with FDA/NF sttus SP 58 Mx. bulk use temp., Mx. extended use temp, 600 Mx. bulk use temp, Mx. bulk use temp, 600 Mx. extended use temp, 600 Mx. bulk use temp, Mx. bulk use temp., Min. use temp., 18 Min. use temp, 18 Min. use temp, 4 20 Min. use temp, 18 Min. use temp., ºF 590ºF 664ºF < 5 > 34 > ºF 635ºF 664ºF Colorless, odorless liquid White minerl oil 600ºF 625ºF 676ºF ºF 635ºF ºF 642ºF 665ºF (Re = 10,000, 10 ft/s, 1-in. tube) > (DIN 51794) (DIN 51794) (DIN 51794) Kinemtic viscosity, cst (mm 2 /s) , Density t 75ºF (lb/gl) Density, vrious tempertures lb/gl 6.86 lb/gl 6.22 lb/gl 5.73 lb/gl 56.0 lb/ft lb/ft lb/ft lb/ft lb/gl 6.86 lb/gl 6.22 lb/gl 5.69 lb/gl 56.0 lb/ft lb/ft lb/ft lb/ft lb/gl 6.94 lb/gl 6.33 lb/gl 5.66 lb/gl 56.3 lb/ft lb/ft lb/ft lb/ft lb/gl 6.86 lb/gl 6.22 lb/gl 5.69 lb/gl 56.0 lb/ft lb/ft lb/ft lb/ft lb/gl 6.96 lb/gl 6.31 lb/gl 5.63 lb/gl 56.6 lb/ft lb/ft lb/ft lb/ft 3 Het cpcity, Btu/(lb ºF) Therml conductivity, Btu/(h ft ºF) Vpor pressure mmhg 169 mmhg 0.36 psi 3.27 psi mmhg 18.6 mmhg 193 mmhg psi psi 3.74 psi mmhg 15.0 mmhg 318 mmhg psi psi 6.16 psi mmhg 18.6 mmhg 193 mmhg psi psi 3.74 psi mmhg 23.1 mmhg 270 mmhg psi psi 5.23 psi Americs/Asi Pcific Visit for dditionl typicl properties nd test vlues. Check with your locl sles office to determine exct vilbility by country.

5 English units 59 Economicl, wide-temperturernge High-performnce, low-pressure low-pressure 68 low-viscosity 72 medium-pressure Mx. bulk use temp, 600 Mx. bulk use temp, Mx. bulk use temp, Mx. bulk use temp, Mx. bulk use temp, Min. use temp, Min. use temp, 9 23 Min. use temp, 27 3 Min. use temp, Min. use temp, 7 14 Cler, yellow to drk mber liquid Alkyl substituted romtic 600ºF 650ºF 553ºF 35 56ºF 9 (ISO 3016) 295ºF Wter-white liquid Isopropyl biphenyl mixture 620ºF 670ºF 631ºF 12 9ºF ºF Cler, ple yellow liquid Modified terphenyl 650ºF 705ºF 678ºF Cler, ple yellow liquid Mixture of synthetic romtics 680ºF 735ºF Cler, mber liquid Mixture of synthetic romtics 715ºF 750ºF 520ºF ºF 385ºF (DIN 51794) 813 (DIN 51794) 75 (DIN 51794) 752 (DIN 51794) 1,117 (ASTM E-659) (Re = 10,000, 10 ft/s, 1-in. tube) 63ºF 122ºF Kinemtic viscosity, cst (mm 2 /s) Density t 75ºF (lb/gl) Density, vrious tempertures lb/gl 7.68 lb/gl 6.98 lb/gl 6.18 lb/gl 62.5 lb/ft lb/ft lb/ft lb/ft lb/gl 7.53 lb/gl 6.81 lb/gl 5.87 lb/gl 61.3 lb/ft lb/ft lb/ft lb/ft lb/gl 7.69 lb/gl 7.01 lb/gl 6.44 lb/gl 63.4 lb/ft lb/ft lb/ft lb/ft lb/gl 7.79 lb/gl 7.13 lb/gl 6.52 lb/gl 65.3 lb/ft lb/ft lb/ft lb/ft lb/gl 8.03 lb/gl 7.19 lb/gl 6.29 lb/gl 69.0 lb/ft lb/ft lb/ft lb/ft 3 Het cpcity, Btu/(lb ºF) Therml conductivity, Btu/(h ft ºF) Vpor pressure mmhg 111 mmhg 1,220 mmhg psi 2.14 psi 23.6 psi mmhg 30.2 mmhg 670 mmhg psi psi 13.0 psi mmhg 90 mmhg 570 mmhg psi 1.7 psi 11 psi mmhg 278 mmhg 1,888 mmhg psi 5.38 psi 36.5 psi mmhg 579 mmhg 4,640 mmhg 0.43 psi 11.2 psi 89.8 psi Visit for dditionl typicl properties nd test vlues. Check with your locl sles office to determine exct vilbility by country.

6 English units 75 Ultrhigh-temperture, low-pressure VP-3 liquid/vpor phse VP-1 Ultrhigh-temperture, liquid/vpor phse Mx. bulk use temp, 725 Min. use temp, Mx. bulk use temp, 625 Norml boiling pt. temp, 469 Min. use temp, Mx. bulk use temp, 750 Norml boiling pt. temp, 495 Min. use temp, Soft solid melting to yellow liquid Terphenyl/quterphenyl Above 2.4ºC (36ºF) cler, sediment-free liquid Phenylcyclohexne + bicyclohexyl Cler, wter-white liquid Biphenyl/diphenyl oxide (DPO) eutectic mixture 725ºF 625ºF 750ºF 770ºF 675ºF ºF 649ºF 469ºF 495ºF 175 (slurry point) 36 (crystllizing point) 54 (crystllizing point) 365ºF 219ºF ºF 235ºF 26 1,052 (ASTM E-659) 68 (ASTM E-659) 1,15 (DIN 51794) (Re = 10,000, 10 ft/s, 1-in. tube) 209ºF 36ºF 54 Kinemtic viscosity, cst (mm 2 /s) Density t 75ºF (lb/gl) 8.69 (175ºF) Density, vrious tempertures lb/gl 7.93 lb/gl 7.17 lb/gl 6.62 lb/gl 65.0 lb/ft lb/ft lb/ft lb/ft lb/gl 7.08 lb/gl 6.16 lb/gl 5.36 lb/gl 57.7 lb/ft lb/ft lb/ft lb/ft lb/gl 7.99 lb/gl 7.16 lb/gl 5.81 lb/gl 65.5 lb/ft lb/ft lb/ft lb/ft 3 Het cpcity, Btu/(lb ºF) Therml conductivity, Btu/(h ft ºF) Vpor pressure mmhg 125 mmhg 1,610 mmhg psi 2.42 psi 31.1 psi mmhg 1,170 mmhg 5,140 mmhg 0.73 psi 22.6 psi 99.4 psi mmhg 810 mmhg 8,060 mmhg 0.62 psi 15.7 psi 156 psi Visit for dditionl typicl properties nd test vlues. Check with your locl sles office to determine exct vilbility by country.

7 SI units VLT Very low-temperture coolnt/het trnsfer D-12 Low-temperture coolnt/ het trnsfer LT Wide-rnge liquid/ vpor het trnsfer ADX-10 Low-temperture pumpbility, medium-temperture RD Low-viscosity, medium-temperture Mx. bulk use temp, 350 Min. use temp, Mx. bulk use temp, 450 Min. use temp, Mx. bulk use temp, 600 Norml boiling pt. temp, 358 Min. use temp, Mx. bulk use temp, 480 Min. use temp, Mx. bulk use temp, 520 Min. use temp, Wter-white liquid Cler, wter-white liquid Cler, light yellow liquid Cler, ple yellow liquid Cler liquid Methylcyclohexne/trimethylpentne mixture Synthetic hydrocrbons Alkyl substituted romtic Synthetic romtic hydrocrbon mixture 175ºC 230ºC ºC 250ºC 270ºC 210ºC 245ºC 345ºC 280ºC 300ºC ºC 181ºC 293ºC 283ºC d 94 d 75 (crystllizing point) 41 56ºC 36ºC (Tg closed cup) 62 (Pensky-Mrtens) 58 (Pensky-Mrtens) 136ºC 120ºC ºC 125ºC 294 (DIN 51794) 277 (DIN 51794) 429 (DIN 51794) 327 (DIN 51794) 395 (DIN 51794) (Re = 10,000, 3.05 m/s, 2.54 cm tube) ºC 32ºC Viscosity, mp s (cp) Density t 25ºC (kg/m 3 ) Density, kg/m Het cpcity, kj/(kg K) Therml conductivity, W/(m K) Vpor pressure, kp , b Visit for dditionl typicl properties nd test vlues. c Check with your locl sles office to determine exct vilbility by country. d 45 for efficient het trnsfer

8 SI units XP Het trnsfer with FDA/NF sttus SP 58 Mx. bulk use temp., Mx. extended use temp, 600 Mx. bulk use temp, Mx. bulk use temp, 600 Mx. extended use temp, 600 Mx. bulk use temp, Mx. bulk use temp., Min. use temp., 18 Min. use temp, 18 Min. use temp, 4 20 Min. use temp, 18 Min. use temp., < 45 >17 >21 290ºC 335ºC 351ºC Colorless, odorless liquid White minerl oil ºC 330ºC 358ºC ºC 335ºC ºC 339ºC 352ºC > (DIN 51794) 363 (DIN 51794) 382 (DIN 51794) 351 (Re = 10,000, 3.05 m/s, 2.54 cm tube) Viscosity, mp s (cp) 28 1, , , Density t 25ºC (kg/m 3 ) Density, kg/m Het cpcity, kj/(kg K) Therml conductivity, W/(m K) Vpor pressure, kp Americs/Asi Pcific Visit for dditionl typicl properties nd test vlues. Check with your locl sles office to determine exct vilbility by country.

9 SI units 59 Economicl, wide-temperturernge 62 High-performnce, low-pressure 66 low-pressure 68 low-viscosity 72 medium-pressure Mx. bulk use temp, 600 Mx. bulk use temp, Mx. bulk use temp, Mx. bulk use temp, Mx. bulk use temp, Min. use temp, Min. use temp, 9 23 Min. use temp, 27 3 Min. use temp, Min. use temp, 7 14 Cler, yellow to drk mber liquid Alkyl substituted romtic ºC 345ºC 289ºC 37 49ºC 68 (ISO 3016) 146ºC 154ºC Wter-white liquid Isopropyl biphenyl mixture 325ºC 355ºC 333ºC 11 23ºC ºC 196ºC Cler, ple yellow liquid Modified terphenyl 345ºC 375ºC 359ºC Cler, ple yellow liquid Mixture of synthetic romtics 360ºC 390ºC Cler, mber liquid Mixture of synthetic romtics 380ºC 400ºC 271ºC (DIN 51794) 433 (DIN 51794) 399 (DIN 51794) 40 (DIN 51794) 603 (ASTM E-659) (Re = 10,000, 3.05 m/s, 2.54 cm tube) 17ºC 50ºC Viscosity, mp s (cp) , Density t 25ºC (kg/m 3 ) ,005 1,020 1,075 Density, kg/m 3 1, , , ,100 1, Het cpcity, kj/(kg K) Therml conductivity, W/(m K) Vpor pressure, kp Visit for dditionl typicl properties nd test vlues. Check with your locl sles office to determine exct vilbility by country.

SI units 75 Ultrhigh-temperture, low-pressure VP-3 liquid/vpor phse VP-1 Ultrhigh-temperture, liquid/vpor phse Mx. bulk use temp, 725 Min. use temp, 175 80 385 Mx. bulk use temp, 625 Norml boiling pt.

10 SI units 75 Ultrhigh-temperture, low-pressure VP-3 liquid/vpor phse VP-1 Ultrhigh-temperture, liquid/vpor phse Mx. bulk use temp, 725 Min. use temp, Mx. bulk use temp, 625 Norml boiling pt. temp, 469 Min. use temp, Mx. bulk use temp, 750 Norml boiling pt. temp, 495 Min. use temp, Soft solid melting to yellow liquid Terphenyl/quterphenyl Above 2.4ºC (36ºF) cler, sediment-free liquid Phenylcyclohexne + bicyclohexyl Cler, wter-white liquid Biphenyl/diphenyl oxide (DPO) eutectic mixture 385ºC 330ºC 400ºC 410ºC 360ºC 430ºC 343ºC 243ºC 257ºC 8 (slurry point) 2.4 (crystllizing point) 12 (crystllizing point) 185ºC 104ºC ºC 113ºC (ASTM E-659) 36 (ASTM E-659) 621 (DIN 51794) (Re = 10,000, 3.05 m/s, 2.54 cm tube) 98ºC 2.4ºC 12 Viscosity, mp s (cp) Density t 25ºC (kg/m 3 ) 1,041 (80ºC) 930 1,060 Density, kg/m , , Het cpcity, kj/(kg K) Therml conductivity, W/(m K) Vpor pressure, kp ,090 Visit for dditionl typicl properties nd test vlues. Check with your locl sles office to determine exct vilbility by country.

11 For more informtion or to find the sles or technicl contct nerest you, visit the Contct us pge on our website: North Americ Soluti Inc. A subsidiry of Estmn Chemicl Compny 575 Mryville Centre Drive St. Louis, MO U.S.A. Telephone: Customer Service, Technicl Service, Fx: Customer Service, (1) Ltin Americ Soluti Brsil Ltd. A subsidiry of Estmn Chemicl Compny Ru Alexndre Dums, 1711 Birmnn 12 7º Andr São Pulo, SP, Brzil Telephone: Brzil, Other Loctions, Fx: Estmn Chemicl B.V. Fscintio Boulevrd VA Cpelle n den IJssel The Netherlnds Telephone: New ddress effective June 15, 2018 Wtermnweg 70, 3067 GG Rotterdm The Netherlnds Asi Pcific Estmn (Shnghi) Chemicl Commercil Compny Ltd. Building 3, Yxin Science & Technology Prk Lne 399 Shengxi Rod Pudong New District , Shnghi, P.R. Chin Telephone: Fx: Telephone: Estmn Corporte Hedqurters P.O. Box 431 Kingsport, TN U.S.A. U.S.A. nd Cnd, -EASTMAN ( ) Other Loctions, +(1) Although the informtion nd recommendtions set forth herein re presented in good fith, Estmn Chemicl Compny ( Estmn ) nd its subsidiries mke no representtions or wrrnties s to the completeness or ccurcy thereof. You must mke your own determintion of its suitbility nd completeness for your own use, for the protection of the environment, nd for the helth nd sfety of your employees nd purchsers of your products. Nothing contined herein is to be construed s recommendtion to use ny product, process, equipment, or formultion in conflict with ny ptent, nd we mke no representtions or wrrnties, express or implied, tht the use thereof will not infringe ny ptent. NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS AND NOTHING HEREIN WAIVES ANY OF THE SELLER S CONDITIONS OF SALE. Sfety Dt Sheets providing sfety precutions tht should be observed when hndling nd storing our products re vilble online or by request. You should obtin nd review vilble mteril sfety informtion before hndling our products. If ny mterils mentioned re not our products, pproprite industril hygiene nd other sfety precutions recommended by their mnufcturers should be observed Estmn. Estmn brnds referenced herein re trdemrks of Estmn or one of its subsidiries or re being used under license. The symbol denotes registered trdemrk sttus in the U.S.; mrks my lso be registered interntionlly. Non-Estmn brnds referenced herein re trdemrks of their respective owners. TF /18

THERMINOL LT. heat transfer fluid. Wide temperature range, liquid/vapor phase fluid to 315 C. (--103 to 600 F)

THERMINOL LT. heat transfer fluid. Wide temperature range, liquid/vapor phase fluid to 315 C. (--103 to 600 F) THERMINOL LT heat transfer fluid Wide temperature range, liquid/vapor phase fluid --75 to 315 C (--103 to 600 F) THERMINOL LT heat transfer fluid Normal boiling pt. temp., 358 Max. bulk use temp., 600