D03 Standard Flow Parallel Circuit Manifold
|
|
- Lionel Moore
- 5 years ago
- Views:
Transcription
1 anifolds & Valve acks D03 Standard Flow arallel Circuit anifold (See for Relief Cartridges) 2 No. of Stations 1 1* Dim. "L",2.13" spacing est. weight in lb.- alum est. weight in lb.- iron Dim. "L"," spacing est. weight in lb.- alum est. weight in lb.- iron * DIENSIONS FOR 1 SAION WIH RELIEF CAVIY & GAGE OR SHADED AREA AVAILABLE ON SECIAL ORDER ONLY NO GAGE OR SLIED WIH SINGLE SAION ANIFOLD Aluminum D03 with 2.13" Spacing & SAE orting example: BAS**SDAAAA OR CODE ONING HREADS & KI RELIEF CAVIY B Bar anifold 01 to 16 NC Std for D03 Valve NC x.63 dp SAE & N anifold 5/16"-18 NC x.47 dp etric Std for D03 Valve 5 x 0.80 x.63 dp A Aluminum S Standard Flow BS* & etric anifold 8 x 1.25 x.47 dp CODE & A & B G Standard Flow AAAA None " Wide Spacing SD SAE CAAA Sun -10A NC NF 1/2" 3/8" 1/4" DAAA ISO BC BS 1/2" 3/8" 1/4" C10-2 NFA D03 C BS 1/2" 3/8" 1/4" D ERIC
2 anifolds & Valve acks D03 Std Flow arallel Circuit anifold (4 Bolt) Note: Extra length ensures & galleries from interface are not obstructed by the end port fittings (See for Relief Cartridges) /2016.A OIONAL RELIEF \.31-j r * j rf e (W -!, I I e (W - ;jj 31. 0_j ounting Kits must be ordered separately. K 300 V Vertical ounting Kit shown below. See page 134 for full part number list. 0 g e e e \ \ \ \ \ I I e I I e ' ' 0 0 \ \ 0,-o O O O \ \ e e e e / le e L ' ' '------' I.. j 1 03 l e BA BA \, - - l ' ' ARALLEL CIRCI WIH OIONAL RELIEF SHOWN No. of Stations 1 1* Dim. "L",2.13" spacing est. weight in lb.- alum est. weight in lb.- iron Dim. "L"," spacing est. weight in lb.- alum est. weight in lb.- iron * DIENSIONS FOR 1 SAION WIH RELIEF CAVIY & GAGE OR SHADED AREA AVAILABLE ON SECIAL ORDER ONLY NO GAGE OR SLIED WIH SINGLE SAION ANIFOLD Aluminum D03 with 2.13" Spacing & SAE orting example: BAS**SDFAAAA OR CODE & ANIFOLD 4 BOL ONING HREADS RELIEF CAVIY B Bar anifold 01 to 16 F NC Std for D03 Valve NC x.63 dp SAE & N anifold 5/16"-18 NC x.47 dp G etric Std for D03 Valve 5 x 0.80 x.63 dp A Aluminum S Standard Flow BS* & etric anifold 8 x 1.25 x.47 dp CODE & A & B G Standard Flow AAAA None " Wide Spacing SD SAE CAAA Sun -10A NC NF 1/2" 3/8" 1/4" DAAA ISO BC BS 1/2" 3/8" 1/4" C10-2 NFA D03 C BS 1/2" 3/8" 1/4" D ERIC
3 anifolds & Valve acks D03 High Flow arallel Circuit anifold (See for Relief Cartridges) No. of Stations 1 1* Dim. "L",2.13" spacing est. weight in lb.- alum est. weight in lb.- iron Dim. "L"," spacing est. weight in lb.- alum est. weight in lb.- iron * DIENSIONS FOR 1 SAION WIH RELIEF CAVIY & GAGE OR SHADED AREA AVAILABLE ON SECIAL ORDER ONLY NO GAGE OR SLIED WIH SINGLE SAION ANIFOLD Aluminum D03 with 2.13" Spacing & SAE orting example: BAH**SFAAAA OR CODE ONING HREADS & KI RELIEF CAVIY B Bar anifold 01 to 10 NC Std for D03 Valve NC x.63" dp SAE & N anifold 5/16"-18 NC x.47" dp etric Std for D03 Valve 5 x 0.80 x.63" dp A Aluminum H High Flow BS* & etric anifold 8 x 1.25 x.47" dp CODE G I High Flow A & B AAAA None " Wide Spacing SF SAE EAAA Sun -3A NF NF 1" 3/4" 1/4" HAAA ISO BF BS 1" 3/4" 1/4" C16-2 NFA D03 F BS 1" 3/4" 1/4" F ERIC
4 anifolds & Valve acks D03 Very High Flow arallel Circuit with Flange orts (See for Relief Cartridges) No. of Stations Dim. "L"," spacing est. weight in lb.- alum est. weight in lb.- iron 1* 1** ** DIENSIONS FOR 1 SAION WIH C10-2 RELIEF CAVIY SHADED AREA AVAILABLE * DIENSIONS FOR 1 SAION WIH -3A RELIEF CAVIY ON SECIAL ORDER ONLY Aluminum D03 with " Spacing & NC ounting example: BAV**1FAAAA OR CODE ONING HREADS & KI RELIEF CAVIY B Bar anifold 01 to 08 NC Std with D03 Valve NC x.63" dp SAE 6 Gauge anifold 3/8"-16 NC x 0.75" dp etric Std with D03 Valve 5 x 0.80 x.63" dp A Aluminum V Very High Flow 10 Gauge anifold 10 x 1.50 x 0.75" dp D Ductile Iron " Std. Spacing CODE A & B G* AAAA None 1F SAE 1" 3/4" 6 EAAA Sun -3A CODE HAAA ISO * Gauge ort determined by ounting hreads C16-2 NFA D03 13
5 anifolds & Valve acks D03 Standard Flow Series Circuit anifold (See for Relief Cartridges) No. of Stations Dim. "L",2.13" spacing est. weight in lb.- alum est. weight in lb.- iron Dim. "L"," spacing est. weight in lb.- alum est. weight in lb.- iron SHADED AREA AVAILABLE ON SECIAL ORDER ONLY Aluminum D03 with 2.13" Spacing & SAE orting example: BASS**SDAAAA OR CODE ONING HREADS & KI RELIEF CAVIY B Bar anifold 02 to 05 NC Std for D03 Valve NC x.63 dp SAE & N anifold 5/16"-18 NC x.47 dp Series circuit etric Std for D03 Valve 5 x 0.80 x.63 dp A Aluminum SS Standard Flow BS* & etric anifold 8 x 1.25 x.47 dp Series circuit CODE & A & B G S Standard Flow AAAA None " Wide Spacing SD SAE CAAA Sun -10A NC NF 1/2" 3/8" 1/4" DAAA ISO BC BS 1/2" 3/8" 1/4" C10-2 NFA D03 C BS 1/2" 3/8" 1/4" D ERIC
6 anifolds & Valve acks D03 Standard Flow Bottom orted arallel Circuit anifold /2016.A Ø.422" hru typical 2 places Optional Relief cavity & orts C'Bored for flush plugs. NOE: odels available with & Omitted on Bottom, Contact Factory apped ounting holes typ. 4 places typ B A B A G GB GA G GB GA B A B A ARALLEL CIRCI WIH OIONAL RELIEF SHOWN ounting Bolt Kits must be ordered separately. Gage port are not plugged. Kits must be ordered separately. No. of Stations 1 1* Dim. "L",2.125" spacing est. weight in lb.- alum est. weight in lb.- iron Dim. "L"," spacing est. weight in lb.- alum est. weight in lb.- iron * DIENSIONS FOR 1 SAION WIH RELIEF CAVIY & GAGE OR NO GAGE OR SLIED WIH SINGLE SAION ANIFOLD SHADED AREA AVAILABLE ON SECIAL ORDER ONLY Aluminum D03 with 2.125" Spacing & SAE orting example: BAAS**SDAAAA OR CODE ONING HREADS & KI RELIEF CAVIY B Bar anifold 01 to 12 NC Std for D03 Valve NC x.63 dp SAE & N anifold 3/8"-16 NC x.75 dp etric Std for D03 Valve 5 x 0.80 x.63 dp A Aluminum AS Standard Flow BS* & etric anifold 10 x 1.50 x.75 dp CODE & A & B G A Standard Flow AAAA None " Wide Spacing SD SAE CAAA Sun 10A ND NF 3/4" 1/2" 1/4" ISO BD BS 3/4" 1/2" 1/4" NFA D03 D BS 3/4" 1/2" 1/4" D ERIC
7 /2016.A anifolds & Valve acks D03 High Flow Bottom orted arallel Circuit anifold Ø.422" hru typical 2 places Optional Relief cavity.50 & orts C'Bored for flush plugs. NOE: odels available with & Omitted on Bottom, Contact Factory apped ounting holes typ. 4 places typ 2.50 B A 1.00 D03 Standard 2Flow Bottom orted 1 arallel Circuit anifold B A G GB GA G GB GA B A B A ARALLEL CIRCI WIH OIONAL RELIEF SHOWN ounting Bolt Kits must be ordered separately. Gage port are not plugged. Kits must be ordered separately. No. of Stations 1 1* Dim. "L",2.125" spacing est. weight in lb.- alum est. weight in lb.- iron Dim. "L"," spacing est. weight in lb.- alum est. weight in lb.- iron * DIENSIONS FOR 1 SAION WIH RELIEF CAVIY & GAGE OR NO GAGE OR SLIED WIH SINGLE SAION ANIFOLD SHADED AREA AVAILABLE ON SECIAL ORDER ONLY Aluminum D03 with 2.125" Spacing & SAE orting example: BAAH**SDAAAA OR CODE ONING HREADS & KI RELIEF CAVIY B Bar anifold 01 to 12 NC Std for D03 Valve NC x.63 dp SAE & N anifold 3/8"-16 NC x.75 dp etric Std for D03 Valve 5 x 0.80 x.63 dp A Aluminum AH High Flow BS* & etric anifold 10 x 1.50 x.75 dp CODE & A & B G AI High Flow AAAA None " Wide Spacing SF SAE EAAA Sun 3A NF NF 1" 3/4" 1/4" ISO BF BS 1" 3/4" 1/4" NFA D03 F BS 1" 3/4" 1/4" F ERIC
Product Tips and Features
5.00.01 anifolds & Valve Packs Product Tips and Features Circuits Relief from P to T are designed to provide a means to connect a single solenoid valve to field piping either on the power unit or near
More informationProduct Tips and Features
6.00.01 anifolds & Valve Packs Product Tips and Features Cover Plates Cover Plates are used in place of directional valves to either completely block off a bar manifold station, or to provide a means of
More informationProduct Tips and Features
2.00.01 02/2002. Manifolds & Valve acks roduct ips and Features apping lates apping lates are sandwich adapters designed to provide a means to easily take pressure readings from the work ports. 1. Standard
More informationS: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
More information250 bar P max. Technical Features. Functional Description
Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations
More informationTMF 600 ( cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationMax. Operating Pressure Kgf/cm 2. F- YB T -01 -F Max. Operating Design Pressure Kgf/cm 2 Number. Panel. Mounting
Remote ontrol Relief Valves his valve is used as a remote control valve for pilot operated type pressure control valves. EI--1-0 Graphic Symbol Specifications hreaded onnection Designation F- YB -01 -F
More informationDISC VALVE HYDRAULIC MOTORS
LHS LH LHV DISC VALVE HYDRAULIC CONENS Page Hydraulic otors Series LHS... 4 Hydraulic otors Series LH... 2 Hydraulic otors Series LHV... 9 Hydraulic otors Series LHHW... 1 otor Special Features... 7 otors
More informationMOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
More informationCONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
More informationPressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
More informationSDH Series. Monoblock and Sectional directional valves
SDH Series Monoblock and Sectional directional valves Additional information his catalogue shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information
More informationPressure Relief Valve
ressure Relief Valve For mounting on hydraulic pumps and motors Series ASDF and AGDF S short response times S trouble-free operation S with improved pressure-adjustment resolution S high levels of functionality
More informationHydro M t HYDRAULIC VALVES SN-4.
Hydro HYDRAULI VALVES A SRONG OMMIMEN O QUALIY Our concept is to sell and deliver the best quality of hydraulic valves, that fully meet our customer s rigorous requirements! o this end, our quality control
More informationTable of Contents. Introduction... How to order modular power unit. Universal manifolds... Power unit models... Pump & Motor assembly 28. Valve pack..
Table of Contents Introduction.... How to order modular power unit Universal manifolds...... Power unit models... 1 2 4 7 Pump & otor assembly 28 Valve pack.. otor: DC & AC. Pressure loaded gear pump.....
More informationDIRECT ACTING PRESSURE RELIEF VALVE Model : DPR
A olyhydron Group Company Description DIREC ACING RESSURE RELIEF VALVE Model : DR of 6 Ref. No. Release 05 / 24 Direct acting valve. Guided poppet design. Cushion arrangement for greater stability and
More informationBST / BSG-03 / 06 / 10 Threaded Connections / Sub-plate Mounting. Specifications / Model Number Designation. Max. Flow L/min (U.S.GPM) Double Sol.
Specifications hreaded Connection Mounting BS-- - - - -47 BS-06- - - - -47 BS-0- - - - -47 BSG-- - - - -47 BSG-06- - - - -47 BSG-0- - - - -47 BS / BSG- / 06 / 0 hreaded Connections / Mounting Specifications
More informationEMechanically Operated Directional Valves
E DIRECIONL CONROLS Cam Operated Directional Valves hese valves may be used to shift the direction of oil flow by depressing the spool by way of a cam. Specifications Max. Operating Max. -Line Max. Flow
More informationRelief Valves 43,2 21,6. T 10A Cavity Locating Shoulder 1,3 Depth 0,8 .25 NPTF FBP FBP/S.25 BSPP FBP/M FBP/T
ISO 3 SNDWICH ODIES luminium rated to bar and S Iron rated to 35 bar. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. 3 x y X Y Model Code List
More informationPrecision Mini Power Slides-Built-in Cylinder
Precision ini Power Slides-Built-in ylinder PS SERIES 4.126 Precision applications: Preloaded Dual- roller bearings eliminate side play for excellent part position repeatability. inear accuracy is within.0001"
More informationRA (cam driven) Series
RA (cam driven) Series Angular Grippers Features and Benefits How o Order Features: Highly reliable rugged general purpose gripper High grip force to size ratio due to cam driven design Fingers can be
More informationFLOMAX SELF PRIMING CENTRIFUGAL PUMP FEATURES. 3 MP PUMPS, INC. PHONE: (800) FAX: (586) FLOMAX 5 FLOMAX 8
FLOMAX 5 8 10 SELF PRIMING CENTRIFUGAL PUMP FEATURES CLOSED COUPLED TO ELECTRIC MOTOR PUMPAK ONLY TO MOUNT TO STANDARD NEMA C FACE MOTOR FLOWS - 100-750 GPM PRESSURES - 100-230 FEET HEAD AVAILABLE IN:
More informationISO 05 SANDWICH BODIES
ISO 5 SNDWICH ODIES luminum rated to 3 psi and Ductile Iron rated to 5 psi. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. FUNCION 3..81 to 1
More informationDC Series. 4-Way Directional Control Valve With Or Without Flow Control PDC16T4PBS PDCF16TM454LF
Engineering & Manufacturing Solutions Specifications: Rated for 0-45 gpm (0-170 lpm) Rated for 3000 psi (207 bar) Std. port sizes (Consult factory for others) - 3/4 NPT all ports - #16 SAE (1-5/16-12)
More informationPressure Control Valves
Catalog HY15-351/US Contents RELIEF VALVES SEQUEN VALVES Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/ DIRECT ACTING RDH42... C4-2... Direct Acting Relief, Poppet Type... 3.8/1...
More informationSDS400. Sectional directional control valve
SDS4 Sectional directional control valve SDS4 Features Sectional directional control valve for high flow, available for fixed displacements hydraulic pumps. From to work sections Open centre Optional carry-over
More information3500 PSI Fixed Displacement Mobile Vane Pumps VQH Series (Supplement to Catalog 353)
3500 PSI Fixed Displacement Mobile Vane Pumps VQH Series (Supplement to Catalog 353) Single 35VQH Double 3525VQH Thru-Drive 35VQHT*S Single and Thru- Drive Pumps VQH Series fixed displacement single and
More informationPUSHBUTTON SWITCHES. electrical controls 1/5 SPECIFICATIONS: TECHNICAL DATA CONTACT BLOCKS LIGHTING BLOCKS
SPECIFICATIONS: For panels with Ø22mm drilling and thickness up to 6mm Modern and functional design Robust and compact construction NF contact with positive rupture KEMA-KEUR certified contact s electrical
More informationmagnaloy coupling company 501 Commerce Drive Alpena, MI Effective Oct 7, 2013 Subject to change upon notice
LIST PRICES Effective Oct 7, 2013 Subject to change upon notice Flexible Drive Couplings PM 90 Couplings Pump/Motor Mounts Hydraulic Manifolds & Manifold Accessories Reservoirs Reservoir Accessories Rod
More informationTPF 60 (36,16 49,94 cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationRef ALL POSITIONS CAST IRON CHECK VALVE PN16. Model/Ref:
Model/Ref: 363-366 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. ISO PN10/16-10 C + 130 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications
More informationSECTION 15 Breakaway Couplers
SECTION Breakaway Couplers Make Model Page Intertraco Intertraco Intertraco Intertraco Intertraco Intertraco Series A & B Breakaway Couplers Series J, N & P Breakaway Couplers Series E & S Breakaway Couplers
More informationHV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control
INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.:
More informationLogic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Logic elements Differential pressure sensing elements for applications up to 50 bar (5000 psi) and 400 L/min (00 USgpm) Logic elements LOGC ELEMENTS... -4 APPLCATON
More informationLOW PRESSURE FILTERS RF Series In-tank / Inline Filters 360 psi up to 400 gpm
LOW PRESSURE FILTERS RF Series In-tank / Inline Filters 36 psi up to 4 gpm Hydraulic Symbol A D2 Features RF 3 filters are constructed of polyamide plastic. RF 6-33 filters are constructed of aluminum
More informationVickers. Vane Pumps. V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications.
Vickers Vane Pumps V Series - Low Noise Vane Pumps High Performance Intravane Pumps For Industrial Applications Revised 6/95 560 Introduction Vickers offers the most complete line of hydraulic intravane
More informationEManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- -
More informationTHD. Series. Heavy Duty Actuators. Pneumatic Actuators for Quarter-Turn Valves and Dampers CONTROLS. Torques to 1,600,000 In-lbs
CONTROLS Division of A-T Controls, Inc. THD Series Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 In-lbs Double Acting and Spring Return Symmetric and
More informationMOTORS MV HYDRAULIC MOTORS T E C H N I C A L C A T A L O G
OTORS V HYDRAULIC OTORS T E C H N I C A L C A T A L O G otors V - Hydraulic otors POCLAIN HYDRAULICS OVERVIEW Displacement Speed V2 V3 aximum cm³/rev [in³/rev.] From 3 [2.14] to 3 [3.23] From [3.3] to
More informationRELIEF VALVES Remote Control / Direct Type Pilot Operated / Solenoid Controlled
RELIEF VALVES Remote ontrol / Direct ype ilot Operated / Solenoid ontrolled Up to 5 Ma (3630 SI), 0 L /m in (06 U.S.GM) ub. E-00 Remote ontrol Relief Valves... age 3 his valve is used as a remote control
More informationCUSTOM ADD-ONS FOR ENGLISH UNITS
Spindles Flange Piloted Slot Collet Jacobs Taper Morse Taper See note on next page for location in the Specification Code No. Description A B C AA Flange 2.625 3.619/3.621 5.313 AB Piloted Slot 2.3125
More informationFunctional Description HU /2012. Compact Hydraulic Power Packs USMA 05. Replaces HA /2008. p max 3600 PSI (250 bar) 4.
Compact Hydraulic ower acks USA 05 p max 3600 SI (250 bar) 4.5 G (17 L/min) 12/2012 Replaces HA 7211 6/2008 Compact hydraulic power packs for the use in lifting platforms, elevating tables, ramps, presses,
More informationDIRECT ACTING PRESSURE RELIEF VALVE DPR
DIREC ACING RESSURE RELIEF VALVE DR Ref. No. 4896 Release 2/25 Description Direct acting valve. Guided poppet design. Cushion arrangement for greater stability and noise control. hree sizes. - 6, and 2.
More informationStandard Assemblies TECHNICAL PRODUCT INFORMATION
CUHION LOCK VALVE tandard Assemblies ECHNICAL PRODUC INFORMAION CUHION LOCK VALVE Applications he cushion lock circuit is used to control the acceleration, and deceleration of reciprocating or rotary reversing
More informationP.C. Priority Flow Control Valve Series J02D3. General Description
CV Catalog HY15-352/US General Description Needle Type, Compensated Regulator Valve. For additional information see Tips on pages 1-4. P.C. Priority Control Valve Series J2D3 Features Good adjustment from
More informationKNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions
More informationMounting and Assembly of Sandwich Bodies
Mounting and ssembly of Sandwich odies Mounting of ISO 0 (CEO ) Sandwiches Many of Sun s ISO 0 (CEO ) sandwich bodies are designed for multi-functional use to permit maximum circuit flexibility. With the
More informationSDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE Directional control valves with direct acting solenoid SDE-SDE General informations Simple, compact and heavy duty designed sectional valves from to sections. SDE luminium alloy inlet sections,
More informationISO 05 SANDWICH BODIES
ISO 5 SNDWICH ODIES luminum rated to 3 psi and Ductile Iron rated to 5 psi. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. FUNCION 3. 1. ir leed
More informationDirectional Controls
VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................
More informationSandwich Bodies TECHNICAL PRODUCT INFORMATION
Sun offers sandwich and subplate mounted bodies for most of its cartridge functions. hese mounting configurations are complete circuit elements that mount under directional control valves. Similar to other
More informationSingle Valve/Sub-plate Type IP67 Compliant 90-SV Series
Single Valve/Sub-plate Type IP7 Compliant -SV Series SV 00 W U aterial restriction Series -SV000 -SV000 Thread type c F G N NPT T NPTF A B SOL.a SOL.a Type of actuation position single (EA) (P)(EB) position
More informationADM SERIES GEROTOR MOTOR LOW SPEED HIGH TORQUE
AD SERIES EROTOR OTOR LOW SEED HIH TORQUE ALICATIONS Use the AD Series for light to medium duty applications such as grain augers and elevators, salt and sand spreaders, car wash and sweeper brushes, conveyors,
More informationSeries 40 Pumps Model Code Supplement Variable pumps model code
odel Code Supplement Single pump model code Product A B C D E F G H J K L 1 2 3 N P 1 2 S T P Product series Code Description P Series 40 variable pump A Displacement 025 24.6 cm³/rev [1.50 in³/rev] 035
More informationSLIP-IN CARTRIDGE INSERT VALVES & OPERATORS
SLIP-IN CRTRIDGE INSERT VLVES & OPERTORS OILGER TOWLER, S.. Entidad Zikuñaga, 6 0.10 HERNNI (Gipuzkoa) phone: (+34) 943 55 700 E-mail: oilgear@oilgeartowler.es INTRODUCTION & FETURES IN RIEF OPERTOR HED
More informationLEVEL CONTROL SWITCHES
The LINC-282 & LINC-282SC Series: Snap Acting, Non-Bleed Pneumatic Level Control Switches Application: These units are used as a level control or as a high or low level alarm. The pneumatic output can
More informationVickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
More informationFILTERS, STRAINERS AND VALVES PRODUCT GUIDE
FILTERS, STRAINERS AND VALVES PRODUCT GUIDE TEE FILTERS INLINE FILTERS BRASS FILTERS SPIN ON FILTERS OFF-LINE FILTRATION Y STRAINERS BASKET STRAINERS DUPLEX STRAINERS STRAINING ELEMENTS FRP STRAINERS DUAL
More informationHeavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
More informationBasic Hydraulic Features. Basic Mechanical Features
APRIL 2006 1.0 Overview The ETA is designed for flow rates that fall beyond the range of most end suction pumps. Performance extends to 9,500 GPM, 440 feet of head, and 88% efficiency. This range is covered
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.
More informationSection 6 Pump Manifolds
Industrial Hydraulics Electric Drives and Controls inear Motion and Assembly Technologies neumatics Service Automation Mobile Hydraulics Section 6 ump Manifolds RA 09 907/07.04 The Drive & Control Company
More informationRelief Valves 24,6. T 10A Cavity Locating Shoulder Depth 0,8 .25 NPTF CBE CBE/S.25 BSPP CBE/M CBE/T. Relief Valves 49,3 25,1 27,2
ISO 5 SNDWICH ODIES luminium rated to 1 bar and S Iron rated to 35 bar. See page viii for ordering cartridge/body and seals. ressure ratings, material specifications on page xiv. FUNCION to 4,6 4,6 3,
More informationSolenoid Controlled Relief Valves
hese valves are a comination of a pilot operated relief valve and a solenoid operated directional valve. Piping etween the two is eliminated as the solenoid valve is directly mounted on the relief valve
More informationCartridges & Manifolds
Cartridges & anifolds SAE Encapsulated Cartridge eets Performance Requirements of D.O.T. FVSS 571.106 eets Dimensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor costs associated
More informationElectric Actuators Maximum in-lbs
Maximum 14040 in-lbs NEMA 4, 4X, 7 ER- Series Features ISO / DIN valve interface Mounting in any position Thermal overload protection (AC & DC except 12 VDC) Friction brake (standard for AC motors except
More informationD05 Directional Control Valves
Engineering D05 Directional Control Valves WFDG4S*4-01, 60 Design Wet Armature Solenoid Operated Max Pressure up to 248 Bar (3600 psi) Same Day Shipments www.fluidynefp.com Table of Contents Basic Characteristicts...2
More informationEngineering Data Pack GlobalGear Series Pump US
Engineering Data Pack GlobalGear Series Pump US Excellence at work. Excellence in life. Table of Contents GG015 - GG030 with Angle Ports (Flanged Only) Mounting Dimensions 3 IG015I - IG030I with Integral
More informationCOMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main
More informationElectric Actuators Maximum in-lbs
Maximum 14040 in-lbs NEMA 4, 4X, 7 ER- Series Features ISO / DIN valve interface Mounting in any position Thermal overload protection (AC & DC except 12 VDC) Friction brake (standard for AC motors except
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More informationBC 09. Pressure Relief Dampers PRD-GAB-12B LISTED
BC 09 Pressure Relief Dampers PRD-GAB-12B Table Of Contents S. No Description Page No 1 General Information 1 2 PRD/NRD- B10 Series 2 3 CBD - B20 Series 3 4 BDD - B30 Series 4 5 Engineering and Performance
More informationEUF/EUFS series. Fire Pump PSB Listed according to CP52(Singapore)
ANNEX 1: SPECIMEN OF LOGO and MARK A) SETSCO (Registered) Logo where innovation f l ow s B) SETSCO Mark for Ready-Mixed Concrete Cert No: RMC-YYYY-XXX-A C) SETSCO Mark for Fire Safety Products Fire Pump
More information36EFC. Series & EFC Valve Package
Engineering & Manufacturing Solutions Specifications: Rated for 0-24 gpm (0-91 lpm) depending on Series 36-38 work sections used. Pressure rating 3000 psi (207 bar). 10 Micron filtration recommended. See
More informationBC. Materials. Working temperature (Seals) Sectors: Industrial, Agricultural
1 SERI ISO-A Manufactured according ISO 7241-A norm, size meets also ISO 5675 requirements. Poppet Valve or Ball closing system. BSP, NPTF, SAE/ORB threads. Others available upon request. Materials Body:
More informationType V Pneumatic actuator
Type V Pneumatic actuator Application Single- or double-acting piston actuator for butterfl y valves and other fi nal control elements with rotary closure members Operating media Dry or lubricated air
More informationLOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS
Fluid Power Specialist Since 1948 LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS Copyright 2018, Almo Manifold & Tool Co. All rights reserved. All attempts have been made to make the information in
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationCombined pump and gripper Medium
VGS 3010 H D W Dimension and connection W D H Feed pressure Vacuum Exhaust/blow mm mm mm 1 Housing VGS3010 23 30 Ø6 mm, 3x G1/8", M5 2 COAX cartridge 2:1 No COAX cartridge 65 2:2 COAX cartridge 2-stage
More informationHYDROSTATIC STEERING UNITS TYPE XY.../1, 2
HYDOSIC SEEING UNIS YE XY.../1, 2 he +S Hydraulic Hydrostatic Steering units are used in low-speed vehicles which driving speed does not exceed 6 km/h - such as: building machines, fork-lift trucks, harvesting
More information6801 Series. Flanged Ball Valves, API 607 Firesafe. ASME Class 300, Flanged Ends. Full Port. 2-pc, Split Body. Carbon or Stainless Steel
Features Investment cast 2-piece bolted body construction Blow-out proof stem Reinforced seats Adjustable, live-loaded graphite packing API 598 inspection and testing API 67 5th Edition fire tested Locking
More informationPump SCP / SCPT 090,130 DIN, SAE
3118 GB Pump SCP 012-108 / SCPT 090,130 DIN, SAE Sunfab SCP and SCPT are range of piston pumps of a bent axis design with fixed displacement for demanding mobile hydraulics. It covers the whole displacement
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationDouble Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
More informationFunctional Description HA /2008. Hydraulic Power Units SMA 05. Replaces HA /2007. p max up to 250 bar Q max up to 17 L/min
Hydraulic ower Units S 05 p max up to 250 bar Q max up to 17 L/min H 7212 6/2008 Replaces H 7212 10/2007 Compact power packs for the use in lifting platforms, elevating tables, ramps, presses, machine
More information4-Way Directional Control With Pressure Compensated Flow Control PSDCF120M64LF Specifications:
Engineering & Manufacturing Solutions With Pressure Compensated Flow Control Specifications: Rated for 0-18 gpm (0-68.1 lpm) Rated for 3000 psi (207 bar) Weighs 6-1/2 lbs. (2.9 kg) 30 Micron filtration
More informationR627 High Flow Gas Regulator with Internal Relief
High Flow Gas Regulator with Internal Relief The Relieving Regulator has an internal relief valve that provides protection against over pressurization. As output pressure builds up above the start-to-discharge
More informationRADIAL PISTON MOTORS TECHNICAL DATA HRS2. Max. cont. speed. Specific torque. Recommended flushing flow. Displacement. Min. speed.
A/200/ MAX. 195 3,1 750 3 250 275 350 36 45 89,5 84,5 8 26 A/200/69 MIN. 69 1,1 850 5 250 275 350 24 30 85,5 78 8 26 A/200/75 MIN. 75 1,2 800 5 250 275 350 26 32,5 87 81 8 26 A/200/95 MIN. 95 1,5 775 4
More informationLOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS
Fluid Power Specialist Since 1948 LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS Copyright 2019, Almo Manifold & Tool Co. All rights reserved. All attempts have been made to make the information in
More informationBreathers. BF...3 & BF...4 Series INNOVATIVE FLUID POWER. ø D1 HEX. Specifications. Hydraulic Symbols. Model Code. Dimensions BF P 3 G 10 W 1.0 /.
BF...3 & BF...4 Series Maximum flow rate - 31 scfm / 230 gpm at 0.04 bar Epoxy coated steel cap Zinc-plated internals Threaded connection Pressurized breather with relief valve (optional - BF3 only) Phenolic
More informationSpecial valves. Logic components AND/OR Timer 2/2 way screw-in valves Miniature screw-in pressure regulators Relief valves
Contents Description Page Dual-pressure valve (AND) 3 OR valve (OR) 33 Timer 34, 35 / way screw-in valves 36, 37 Miniature screw-in pressure regulators 38, 39 Relief valves 40 Special valves Logic components
More informationDisc Valve Motors Integral Cross Over Relief Valve Technical Manual 2000 Series
Disc Valve Motors Integral Technical Manual 2000 Series Introduction Eaton Char-Lynn, your proven low speed high torque motor supplier, now offers the Char-Lynn 2000 Series motor with our proven Eaton
More informationSeries Shockless Type Solenoid Controlled Pilot Operated Directional Valves
Solenoid Controlled ilot Operated Directional Valves Electronic Circuit X Specifications Descriptions G-DSHG-4-3C - - - -/9 G-DSHG-6-3C - - - -/9 Max. Flow /min (U.S.GM) 16 (4.3) (66.1) 1 1 Max. Operating
More informationESCAPEMENT DEVICES DURA-SCAPE BC SERIES STANDARD LINE 2-1.1
DURASCAPE BC SERIES STANDARD LINE Full range of sizes and strokes Hard Stops Robust design Few moving parts Extremely Durable Fully field serviceable Sensors Available See Page 21.2 FOR ORE INFORATION
More informationNEMA Frame. W Premium Brake Motors NEMA. Foot Mounted 3PH, 60 Hz Aluminum Construction /5T 4.5
W Premium Brake Motors NEMA NEMA Foot Mounted 3PH, 60 Hz Aluminum Construction Performance - Page 77 Dimensions - Pages 67-68 Plus Additional Length shown below FOOT MOUNTED CC133B HP RPM FRAME BRAKE 230/460*
More informationDirectional Control Valve HDS21
Directional Control Valve Reference: 2--991232-N-2 Issue: 3.218 1/64 Contents age 1 General information... 4 1.1 Introduction... 4 1.2 Directional valve installation... 1.3 Fittings... 1.4 Hydraulic fluid...
More informationCOMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief
More information2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 220 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 400 Flanges ISO PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN 200
More informationAngular Grippers- 180 Series
D/ SERIES Angular Grippers- Series. angular gripper: he full jaw opening ( ) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator. Multiple mounting locations:
More informationFlat Cylinders Flat-1 Square Flat-1 2.3-2.12 2.13-2.19 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories Stainless Steel Flat-1 EF1 Cylinders
More information