Functional Description HA /2008. Hydraulic Power Units SMA 05. Replaces HA /2007. p max up to 250 bar Q max up to 17 L/min

Size: px
Start display at page:

Download "Functional Description HA /2008. Hydraulic Power Units SMA 05. Replaces HA /2007. p max up to 250 bar Q max up to 17 L/min"

Transcription

1 Hydraulic ower Units S 05 p max up to 250 bar Q max up to 17 L/min H /2008 Replaces H /2007 Compact power packs for the use in lifting platforms, elevating tables, ramps, presses, machine tools, mobile applications and others 5 basic hydraulic circuits in the manifold ossibility of building up an additional circuit in the form of vertical or horizontal stacking assembly ank capacities from 1.5 to L Low noise level Functional Description Compact hydraulic power packs are designed to fit into small envelope dimensions and can be used in lifting platforms, elevating tables, manipulators, small presses, machine tools and mobile applications. Each power pack consists of an electric motor, a pump, a manifold and a tank. he aluminum body forms the base of the power pack, on which all the main components, including the hydraulic elements, are mounted. he function of the power packs is apparent from the respective hydraulic circuit diagrams. he desired combination of particular components and hydraulic elements can be defined by reference to the ordering code and the respective tables. he hydraulic circuits can be accomplished in sizes 03, 04 and 06. he size 03 is in a form of sectional directional valves, and does not enable any extension by valves for controlling the flow rate and the pressure. he mounting position of the power pack is horizontal or vertical - see the ower ack Dimensions on pages 11 to 17. ll ports have G 1/4 internal threads (the thread G3/8 is to agreed with manufacturer). With the standard model the connecting ports, of the components of the vertical stacking assembly are oriented onto one side. Orientation of ports, each onto another side is to be agreed with the manufacturer. he basic combinations of electric motors and pumps, as well as their code designations, are shown in tables 1, 2 and 3. Information regarding the basic power pack surface treatment is on page 3. 1

2 H 7212 Ordering Code S 05- / / Compact ower ack ump displacement in cm Solenoid voltage 12V DC 24V DC 205V DC 230V / 50 (60)Hz Series X Series Code of the electric motor (see tables 1, 2 and 3) DC electric motor with switch Single-phase electric motor without starting module with starting module R 0 hre-phase electric motor 0 Foot bracket 0 without foot bracket F low foot bracket high holder (for tank codes - 45 only) K Nominal size of stacking assembly elements 0 Without stacking assembly 3 Size 03 4 Size 04 6 Size 06 (see page 12) Number of add-on units 0 Without stacking assembly 1 1Section 2 2 Sections 3 3 Sections 4 4 Sections 5 5 Sections (see page 12) ype of stacking assembly 0 Without stacking assembly Configuration Configuration C Configuration C D Configuration D E Configuration E F Configuration F (see page 12) ype of hydraulic circuit see table on pages 7 and 8 ank code see pages ype of filter used 0 without filter suction filter S R* return line filter without indication E* return line filter with el. indication * return line filter with manometer * for tank codes only 2

3 echnical Data Flow rate L/min to tables 1, 2 and 3 Working pressure bar to tables 1, 2 and 3 ank capacity L ype of pump external gear pump, left-hand rotation Nominal pressure / max. pressure bar to tables 1, 2 ower of electric motor to tables 1, 2 and 3 ype of electric motor single phase three phase DC Voltage of the electric motor V /0 12/24 Frequency Hz Electric motor enclosure type / insulation class I 55/F I 55/F I 43/F Voltage of directional valves V 12DC, 24DC, 205DC, 230C Hydraulic fluid Hydraulic oils of power classes (HL, HL) to DIN Oil Conductivity ps/m 500 on 20 C Viscosity range mm 2 /s ax. degree of fluid contamination Class 21/18/15 to ISO 46 (1999). Filtration (suction/return/) m 60/12 Fluid temperature range C Fluid temperature range for a short term 10 minute max. C -20 minimum +80 maximum mbient temperature range C hread of the connectiong ports,,,, G1/4 (, G3/8 - per request) Working position horizontal, vertical H 7212 Standard Surface reatment odel aterial used Surface treatment Cylindrical sheet tank Sheet steel Komaxit RL 7030 Square sheet tank/cover Sheet steel Komaxit RL 7030 Cylindrical plastic tank ORELIS E 8131 (transparent) Without surface treatment Square plastic tank OSEN (transparent) Without surface treatment DC electric motor inc coated C electric motor RL 7030 Other components to manufacturer standard Other surface treatment - is to agreed with manufacturer. 3

4 H 7212 ab. 1a Code of the Code of the pump three-phase motors 03 X X X X pmax. ** [bar] V n[1/min] p[kw] Q/pn.* [L/min] / [bar] ,12 0, , , ,7 80 0,9 65 1,4 1, ,18 0,3 2 0, , , ,9 95 1,4 60 1,8 45 2, ,25 0, , , , ,4 80 1,9 60 2, ,37 0, , , ,9 90 2, ,55 0, , , , ,75 1, , , ,10 2, , , , , ,18 0, ,9 90 1,2 75 1,5 60 1,9 45 2, ,25 0, , , ,5 80 1,9 65 2,8 3, ,37 0, , , , ,9 90 2,9 60 3,9 45 5, ,55 1, , , ,9 90 3,9 65 5, ,75 1, , , ,0 90 5, ,10 1, , , , ,50 2, , , ,20 4, , ,00 ab. 1b Code of the Code of the pump three-phase motors pmax. ** [bar] V n[1/min] p[kw] Q/pn.* [L/min] / [bar] , ,18 3, ,25 3,2 4,2 30 4, ,37 3,2 55 4,2 45 4,6 5,6 35 6,1 30 7, ,55 3,2 85 4,2 65 4,6 60 5,6 50 6,1 45 7,4 35 7, , ,75 3, ,3 90 4,6 80 5,7 65 6,2 60 7,5 50 8, , ,10 3, , , ,7 95 6,2 90 7,5 75 8, , ,50 3, , , , , , , , ,20 4, , , , , , , ,00 6, , , , , , ,37 6, ,55 6,4 8,6 30 9, ,75 6,5 55 8,7 45 9,4 11, , , ,10 6,5 80 8,7 65 9, , , , , ,50 6, ,7 85 9, , , , , ,20 6, , , , , , , ,00 6, , , , , , ,3 90 * pn. - nominal pressure = the highest working pressure allowed without time restriction ** pmax. - maximum pressure = maximum pressure allowed for a short time - max. 20s 4

5 ab. 2a ttention! ay special attention to the start-up torque of single-phase motors. Use the start-up module during start-up under pressure. * pn. - nominal pressure = the highest working pressure allowed without time restriction ** pmax. - maximum pressure = maximum pressure allowed for a short time - max. 20s H 7212 Code of the Code of the pump single-phase motors 03 X X X X pmax. ** [bar] V n[1/min] p[kw] Q/pn.* [L/min] / [bar] ,12 0, , , ,7 80 0,9 65 1,3 1, ,18 0, , , , ,9 90 1,4 60 1,9 45 2, ,25 0, , , , ,4 80 1,9 60 2, ,37 0, , , ,9 90 2, ,55 0, , , , ,75 1, , , ,10 2, , ,18 0, ,9 90 1,2 70 1,5 55 1,9 45 2, ,25 0, , , ,5 80 1,9 60 2,9 3, ,37 0, , , , ,9 90 2,9 60 3,9 45 5, ,55 1, , , ,9 90 3,9 65 5, ,75 1, , , ,9 90 5, ,10 1, , , , ,50 2, , , ,20 5,3 200 ab. 2b Code of the Code of the pump single-phase motors pmax. ** [bar] V n[1/min] p[kw] Q/pn.* [L/min] / [bar] , ,18 3, ,25 3,1 4,2 30 4, ,37 3,1 55 4,2 45 4,6 5,6 30 6,1 30 7, ,55 3,1 85 4,2 65 4,6 60 5,6 50 6,1 45 7,4 35 7, , ,75 3, ,3 85 4,7 80 5,7 65 6,2 60 7,5 50 8, , ,10 3, , , ,7 95 6,2 90 7,5 75 8, , ,50 3, , , , , , , , , , ,37 6, ,55 6,4 8,6 30 9, ,75 6,4 55 8,6 45 9,3 11, , , ,10 6,5 85 8,6 65 9, , , , , ,50 6, ,6 85 9, , , , , ,20 6, , , , , , ,1 70 ab. 3 12V 24V Code of the electric motor kw / 0,35 / 43 0,4 45 / 0,8 / 46 1,2 51 / 1,5 / 52 2,0 / 63 3,0 Code of the pump - 63 Q [L/min] /p [bar] See characteristics on page 6 ttention! he DC motors must be loaded, so as to reduce the revolutions! Do not run the motors without pressure loading! 5

6 H 7212 Characteristics Q[L/min] Code Code 43 EL. OOR 12V 0.35kW attery h, charge 75%, 20 C Q[L/min] EL. OOR 24V 0.4kW attery 36 h, charge 75%, 20 C p [bar] p [bar] Code 45 Code 46 Q[L/min] EL. OOR 12 V 0.8kW attery h, charge 75%, 20 C Q[L/min] EL. OOR 24 V 1.2kW attery 36 h, charge 75%, 20 C p [bar] p [bar] Code 51 Code 52 Q[L/min] EL. OOR 12 V 1.5kW attery 100 h, charge 75%, 20 C Q[L/min] EL. OOR 24 V 2kW attery 70 h, charge 75%, 20 C p [bar] p [bar] Code 63 Q[L/min] EL. OOR 24 V 3kW attery 180 h, charge 50%, 20 C p [bar] 6

7 asic Hydraulic Circuit Diagrams H W W 73, ,5 ounted on the side of the pump via thread G1/4 ype Ordering number Symbols Starting module lug VSI G1/ Exact position of the starting module or plug... ref. page ,5 68 W W ,5 7

8 H 7212 asic Hydraulic Circuit Diagrams X W X Y Y X W 73,5 68 ounted on the side of the pump via thread G1/ W X Y Y X 73,5 68 W Y ,5 Y X X Y L 69 X Y L ,5 ype Ordering number Symbols Starting module lug VSI G1/ Exact position of the starting module or plug... ref. page 18. 8

9 H 7212 X X ype of the seat valve Functional symbol SD11-2/SL3 + lever with micro switch 4 SD11-2/SL2 +lever without micro switch 72 3 SD1-2/SL SD3E-2/H2O SD3E-2/H2L Y Y ype of the throttle valve Functional symbol 58 anually controlled pump upon request 2 SF22-2/H* 30 max * he size of the throttle valve corresponds regularly with the flow rate Q of the pump used. Other throttle valve size on request of the customer. 1 VSV1-UNF 8, pro X = pro X = 0 Directly Operated ressure Relief Valves SR1-2/S - ressure range refer to data sheet H 5063 W Check Valves SC1F-3/C L Logical Valves SSH1H-3/C 9

10 H able of Dimensions Single-phase and three-phase motors Code of E ower [kw] Voltage [V] Current Speed []** [1/min]** max [mm] C max [mm] D [mm] 1 0, , , , , , , , , , , , , , , , ,12 0 0, ,18 0 0, ,25 0 0, ,37 0 1, ,55 0 1, ,75 0 1, ,10 0 2, ,50 0 3, ,20 0 5, ,00 0 6, , , , , , , , , , , , , , , , , ,18 0 0, ,25 0 0, ,37 0 1, ,55 0 1, ,75 0 1, ,10 0 2, ,50 0 3, ,20 0 4, ,00 0 6, DC electric motor Code of E ower Voltage Current Speed [kw] [V] []** [1/min]** Load factor ** [mm] C [mm] D [mm] 0, S2-10 min S3-35% ED , S2-6 min S3-25% ED , S2-1 min S3-4% ED , S2-1min S3-3% ED , S2-2 min S3-7% ED , S2-3 min S3-8% ED , S2-4.5 min S3-10% ED Load factor ** Valid for rated power values. Duty S1 (min) Intended for use under continuous duty cycle conditions (load factor S1) for various press-related applications and those which involve dynamic strokes, with recommendation to consult the conditions of use with manufacturer. Duty S2 (min) - short-time operation he motor operates with constant load for a definite time, in order to reach the maximum permissible temperature max., later on an idle period long enough to reach the equality between motor temperature and ambient temperature. Duty S3 (%ED) - periodic operation he operation of the motor is a continuous sequence of identical cycle, each compound from a load period and an idle period. During the load period the motor can be reach the maximum permissible temperature. S3 value shows, in percentage, the length of the load period respect to the total cycle-load period more idle period. he S3 curve quoted in the performance specifications is referred to a lengh ts cycle of 10 minutes.

11 Valve Dimensions Dimensions in millimeters H 7212 ower pack with cylindrical sheet tank, single-phase and three-phase motors - mounting position horizontal S 73, C D Connecting lock Connection holder S 4 x x 10 Hl ,5 Facing Strana the čerpadla pump Dimensions, C, D see able of Dimensions page 10 Code of the tank Capacity in [L] Working volume [L] 10 (sheet) (sheet) (sheet) (sheet) L Facing Strana the motoru 12, ,2 87,5 R3,5 16,5 5,5 ower pack foot bracket Dimensions L yp [mm] F 37 K ,2 12, ,5 6x 10,5 NK SUOR code with holder of ower ack Configuration F

12 H 7212 Valve Dimensions Dimensions in millimeters Lay - out of the lock power pack with cylindrical sheet tank Configuration Size 04, Verze 06 Dn 04, 06 Verze D 04, 06 n Configuration Size 04, 06 Number of add-on units 0 5 Configuration Verze C Size 04, D06 n 04, 06 Verze D D 03 n Configuration D Size 03 Configuration E Size 03 Configuration Verze F Size 04, Dn0604, 06 Verze E D 03 n Dimension E [mm] F[mm] G[mm] 12 hread of the connecting ports,,,, - G1/4 (, - G3/8) ressure switch Reducing valves ressure relief valves ilot operated check valves cartridge Check Valves Flow Valves Size Size

13 Valve Dimensions Dimensions in millimeters H 7212 ower pack with cylindrical sheet tank - mounting position horizontal , Code of the tank Code of the tank Working volume [L] 1 20 (sheet) 6 3, (sheet) 8 4, (sheet) 10 6, ower pack with cylindrical sheet tank - mounting position vertical 73, Code of the tank Code of the tank Working volume [L] 51(sheet) 6 3, (sheet) 8 5, (sheet) 10 7,

14 H 7212 Valve Dimensions Dimensions in millimeters ower pack with cylindrical plastic tank - mounting position horizontal 1 73, Code of the tank Capacity in [L] Working volume [L] 1 (plastic) 6 3, (plastic) 8 4, (plastic) 10 6, ower pack with cylindrical plastic tank - mounting position vertical Code of the tank Capacity in [L] Working volume [L] 1 41 (plastic) 6 3, (plastic) 8 4, (plastic) 10 6,

15 ,5 X IN Valve Dimensions Dimensions in millimetes ower pack with square plastic tank - mounting position horizontal E H 7212 NK SUOR code ,5 12 Code of the tank Capacity in [L] Working volume [L] E 62 (lastic) (lastic) (lastic) (lastic) (lastic) ower pack with square plastic tank - mounting position vertikal X IN Code of the tank Capacity in [L] Working volume [L] 61 (lastic) 2 1, (lastic) 4 3, (lastic) 6 5, (lastic) 8 7, (lastic) 10 9,

16 H 7212 Valve Dimensions Dimensions in millimetes ower pack with square sheet tank - single-phase and three-phase motors with return line filter Configuration, E , x d C R=1/2d - 4x 4 6 Dimensions C seehe page 10 - able of Dimensions Code of the tank Capacity in [L] Working volume [L] d 56 (sheet) 8 4, , (sheet)) (sheet) (sheet) , (sheet) ,

17 RGO Valve Dimensions Dimensions in millimeters H 7212 ower pack with cylindrical sheet tank - with DC electric motor out return line filter D ower pack with square sheet tank - with DC electric motor out return line filter C 8 L1-06- ELUFUNGSFILERI IR REHER 121 C Optional stacking assembly, versions, E ref. page 12. Dimensions, C, D seehe page 10 - able of Dimensions Dimensions 8 seehe page 15 17

18 H 7212 S 05 - llustration Figure lug 9 8 1b 11 1a 1 4 2a 2 1 C-otor 1a C-motor flange spacer 1b C-motor coupling (dif. types) 2 DC otor 2a DC-motor coupling 3. ank with accessories (dif. types) 4. Center block versions,, C, D, E 5. ump (dif. types) 6. Suction filter and pipe 7. Return line 8. ase-plate for different types of stacking assembly 9. Cover plate for horizontal stacking 10. Stacking assembly valves Starting module Caution! he packing foil is recyclable. he technical information regarding the product presented in this catalogue is for descriptive purposes only. It should not be construed in any case as a guaranteed representation of the product properties in the sense of the law. 18 RGO-HYOS s.r.o. C Vrchlabí el.: , Fax: sales.cz@argo-hytos.com Subject to alteration without notice!

250 bar P max. Technical Features. Functional Description

250 bar P max. Technical Features. Functional Description Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations

More information

Functional Description HU /2012. Compact Hydraulic Power Packs USMA 05. Replaces HA /2008. p max 3600 PSI (250 bar) 4.

Functional Description HU /2012. Compact Hydraulic Power Packs USMA 05. Replaces HA /2008. p max 3600 PSI (250 bar) 4. Compact Hydraulic ower acks USA 05 p max 3600 SI (250 bar) 4.5 G (17 L/min) 12/2012 Replaces HA 7211 6/2008 Compact hydraulic power packs for the use in lifting platforms, elevating tables, ramps, presses,

More information

Functional Description HA /2005. Compact power packs SMA 03. Replaces HA /2003. p max up to 200 bar Q max up to 0,5-17 L/min

Functional Description HA /2005. Compact power packs SMA 03. Replaces HA /2003. p max up to 200 bar Q max up to 0,5-17 L/min Compact power packs SMA 03 p max up to 200 bar Q max up to 0,5-17 L/min HA 7203 8/2005 Replaces HA 7203 2/2003 Compact power packs for the use in lifting platforms, elevating tables, ramps, presses, machine

More information

Functional Description

Functional Description Under Oil ower ack SA 01 p max 250 bar Q max 17 l/min HA 7111 07/2014 Replaces HA 7111 12/2009 Small compact power packs used in lifting platforms, ramps and other applications 3 basic hydraulic circuits

More information

HYDRAULIQUE PNEUMATIQUE TOUS COMPOSANTS VENTE - REPARATION DEPANNAGE

HYDRAULIQUE PNEUMATIQUE TOUS COMPOSANTS VENTE - REPARATION DEPANNAGE HYDRAULIQUE PNEUMATIQUE TOUS COMPOSANTS VENTE - REPARATION DEPANNAGE HYPSO RN 113 BP 10 82700 MONTECH Tél. : 05 63 64 70 71 Fax : 05 63 64 76 56 Web : http://www.hypso.fr Mail : contact@hypso.fr COMPACT

More information

SD2E-A4. Functional Description. 4/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2014. Replaces HA /2013

SD2E-A4. Functional Description. 4/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2014. Replaces HA /2013 / Way Solenoid Operated Directional Control Valves Spool Type SDE- /-6 UNF p max 50 bar (5076 PSI) Q max 0 L/min (7.9 GPM) 07/0 Replaces 0/0 Hardened precision working parts High flow capacity High transmitted

More information

SD2E-A4. Functional Description. 4/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2012. Replaces HA /2010

SD2E-A4. Functional Description. 4/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2012. Replaces HA /2010 4/2 Way Solenoid Operated Directional Control Valves Spool Type SD2E-4 /4-16 UNF p max 50 bar (5076 PSI) Q max 0 L/min (7.9 GPM) 7/2012 Replaces 10/2010 4/2 way cartridge valves solenoid operated spool

More information

VJO1-06/S. Functional Description HA /2010. Check Valves. Replaces HA /2008. Size to 06 (1/4) bar (4600 PSI)...20 L/min (5.

VJO1-06/S. Functional Description HA /2010. Check Valves. Replaces HA /2008. Size to 06 (1/4) bar (4600 PSI)...20 L/min (5. Check Valves VJO1-06/S Size to 06 (1/4)...320 bar (4600 PSI)...20 L/min (5.3 GPM) HA 5004 11/2010 Replaces HA 5004 4/2008 Small dimensions Two models Poppet design Leak-free closure in one direction VJO1-06/Sx-1

More information

SD2E-A3. Functional Description. 3/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2013. Replaces HA /2012

SD2E-A3. Functional Description. 3/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2013. Replaces HA /2012 3/2 Way Solenoid Operated Directional Control Valves Spool Type SD2E-A3 3/4-6 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) HA 404 /203 Replaces HA 404 07/202 Hardened and precision working parts

More information

VSK. Functional Description HA /2008. Constant Flow - Control Valves VSK4 VSK2 VSK2 VSK4. Replaces HA /2000

VSK. Functional Description HA /2008. Constant Flow - Control Valves VSK4 VSK2 VSK2 VSK4. Replaces HA /2000 Constant Flow - Control Valves VSK HA 5 5/008 Size 06 p max up to 0 bar Q max up to 0 L/min Replaces HA 5 /000 Wide range of throttling oriffices VSK4 Two models: - cartridge - screw-in cartridge valve

More information

RPE2-04. Functional Description HA /2002. Solenoid Operated Directional Valves. Replaces HA /2000

RPE2-04. Functional Description HA /2002. Solenoid Operated Directional Valves. Replaces HA /2000 Solenoid Operated Directional Valves RPE2-04 HA 4012 3/2002 Size 04 p max up to 320 bar Q max up to 20 l/min Replaces HA 4012 6/2000 Special model - special installation dimensions 4/3-, 4/2- and 3/2-way

More information

SD3E-B2. Functional Description. 2/2 Way Solenoid Operated Directional Control Valves Poppet Type HA /2012. Replaces HA /2010

SD3E-B2. Functional Description. 2/2 Way Solenoid Operated Directional Control Valves Poppet Type HA /2012. Replaces HA /2010 / Way Solenoid Operated Directional Control Valves Poppet Type SD3E-B 7/8-4 UNF p max 40 bar (609 PSI) Q max 75 L/min (9.8 GPM) H 4063 7/0 Replaces H 4063 0/00 / way cartridge valves solenoid operated

More information

VJL Functional Description. Ordering Code VJL Spare Parts HA /2002. Logical 3-way check valves. Replaces HA /2001

VJL Functional Description. Ordering Code VJL Spare Parts HA /2002. Logical 3-way check valves. Replaces HA /2001 Logical 3-way check valves VJL2-304 HA 5007 3/2002 Size 04 p max up to 210 bar Q max up to 15 L/min Replaces HA 5007 6/2001 Screw-in cartridge valve For leak-free applications Simple design High reliability

More information

Functional Description

Functional Description 4/2 Way Solenoid Operated Directional Control Valves Spool SD2E-A4 Type 3/4-16 UNF p max 350 bar (5076 PSI) Q max 30 L/min (7.9 GPM) 01/2005 4/2 Way cartridge valves solenoid operated spool directed Manual

More information

VRN2-10. Functional Description HA /2008. Pilot Operated Pressure Reducing Valves. Replaces HA /2003

VRN2-10. Functional Description HA /2008. Pilot Operated Pressure Reducing Valves. Replaces HA /2003 Pilot Operated Pressure Reducing Valves VRN2-0 HA 554 7/2008 Size 0 p max up to 20 bar Q max up to 50 (80) L/min Replaces HA 554 2/200 Screw-in cartridge valve for manifold mounting and stacking assemblies

More information

RPEW4-06. Functional Description HA /2005. Solenoid Operated Directional Control Valves with Wirebox 1/2 NPT 1/2 NPT. Replaces HA /2004

RPEW4-06. Functional Description HA /2005. Solenoid Operated Directional Control Valves with Wirebox 1/2 NPT 1/2 NPT. Replaces HA /2004 Solenoid Operated Directional Control Valves with Wirebox RPEW4-06 2/2005 Size 06 p max up to 320 bar Q max up to 80 L/min Replaces 2/2004 4/3, 4/2 way directional control valves Four-land spool - reduced

More information

RPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15.

RPEK1-03/B. Functional Description HA /2011. RPEK1-03 Modular Valve Assembly. D n 03 p max 250 bar (3626 PSI) Q max 60 l/min (15. REK-03 Modular Valve ssembly REK-03/ /0 D n 03 p max 50 bar (366 SI) Q max 60 l/min (5.8 GM) Compact modular valve system assembly Easy to build complex circuits he possibility of subsequent rebuilding

More information

Size 06 (D03) Q max 100 l/min (26.4 GPM) p max 250 bar (4600 PSI) RPE*-06 PRM*-06

Size 06 (D03) Q max 100 l/min (26.4 GPM) p max 250 bar (4600 PSI) RPE*-06 PRM*-06 Modular Load Sensing System MLS3-06 Size 06 (D03) Q max 00 l/min (26.4 GM) p max 250 bar (4600 SI) ossible Applications riority module riority module 2 ase module Section module REK distributors Section

More information

VPN1-06. Functional Description HA /2008. Pilot Operated Pressure Relief Valves. Replaces HA /2002

VPN1-06. Functional Description HA /2008. Pilot Operated Pressure Relief Valves. Replaces HA /2002 Pilot Operated Pressure Relief Valves VPN-06 HA 56 4/2008 Size 06 p max up to 320 bar Q max up to 70 L/min Replaces HA 56 3/2002 Cartridge, modular and in-line design Five pressure ranges Two pressure

More information

SR1A-A2. Functional Description HA /2012. Directly Operated Pressure Relief Valves. Replaces HA /2010. Screw-in cartridge design

SR1A-A2. Functional Description HA /2012. Directly Operated Pressure Relief Valves. Replaces HA /2010. Screw-in cartridge design Directly Operated Pressure Relief Valves SRA-A2 HA 5063 7/202 3/4-6 UNF p max 350 bar (5080 PSI) Q max 30 L/min (7.9 GPM) Replaces HA 5063 8/200 Screw-in cartridge design 4 pressure ranges Pressure setting

More information

RPEW4-10. Functional Description HA /2012. Solenoid Operated Directional Control Valves with Wirebox. Replaces HA /2006

RPEW4-10. Functional Description HA /2012. Solenoid Operated Directional Control Valves with Wirebox. Replaces HA /2006 Solenoid Operated Directional Control Valves with Wirebox RPEW-10 5/2012 Size 10 (D 05) 350 bar (5076 PSI) 10 L/min (37 GPM ) Replaces 2/2006 /3, /2 way directional control valves Four-land spool - reduced

More information

PRM2-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013. Size 06 p max 350 bar Q max 40 L/min

PRM2-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013. Size 06 p max 350 bar Q max 40 L/min Proportional Directional Control Valves Size 06 p max 50 bar Q max 40 L/min PRM-06 HA 5104 /014 Replaces HA 5104 /01 Compact design with integrated High reliability Simple replacement of the exciting coils

More information

Open center control block in mono block design MO-16, 22, 32

Open center control block in mono block design MO-16, 22, 32 Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:

More information

RPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007

RPE3-04. Functional Description HA /2010. Directional Control Valves Solenoid Operated. Replaces HA /2007 Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) 10/2010 Replaces 12/2007 4/3-, 4/2- way directional control valves with solenoid control Solenoids

More information

Proportional Directional Valve System

Proportional Directional Valve System roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3

More information

RPEH4-16. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2002

RPEH4-16. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2002 4/2 and 4/3 Way Directional Control Valves Pilot Operated RPEH4-16 HA 4023 2/2003 Size 16 p max up to 320 bar Q max up to 300 L/min Replaces HA 4023 2/2002 Solenoid pilot operated directional valves (RPEH)

More information

NDR Series Rotor Pack

NDR Series Rotor Pack efore using the product, please check the DR Series Rotor ack Features Low noise chieves a noise level of no greater than 0 d () and there is no need to worry about hydraulic noise even at factories in

More information

Pressure Relief Valve

Pressure Relief Valve ressure Relief Valve For mounting on hydraulic pumps and motors Series ASDF and AGDF S short response times S trouble-free operation S with improved pressure-adjustment resolution S high levels of functionality

More information

Pump Safety Block Model DBA... / DBAW, Series 1X

Pump Safety Block Model DBA... / DBAW, Series 1X ump Safety lock odel D... / DW, Series X Sizes to 6 SI ( bar) 7 G (65 L/min) R 5 88/.95 Replaces:.9 ermits low pressure start-up and by-pass of pump Direct mounting to SE pressure port of pump Light biasing

More information

PRM7-04. Functional Description HA /2012. Proportional Directional Control Valves. Replaces HA /2009

PRM7-04. Functional Description HA /2012. Proportional Directional Control Valves. Replaces HA /2009 Proportional Directional Control Valves PRM7-6/ Size D () bar (6 PSI) L/min (. GPM ) Replaces /9 Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis

More information

LUDV control block of sandwich plate design

LUDV control block of sandwich plate design LUDV control block of sandwich plate design RE 64125/02.11 Replaces: 01.10 1/22 ype SX 14, SX 14 S Nominal size 14 Series 2X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar

More information

Compact power pack program RE 00163/ The Drive & Control Company

Compact power pack program RE 00163/ The Drive & Control Company Compact power pack program RE 00163/08.06 he Drive & Control Company Bosch Rexroth Oil Control Compact power pack program Compact power pack modular system Compact power packs are available with standard

More information

RPE3-04. Functional Description HA /2013. Directional Control Valves Solenoid Operated. Replaces HA /2010

RPE3-04. Functional Description HA /2013. Directional Control Valves Solenoid Operated. Replaces HA /2010 Directional Control Valves Solenoid Operated RPE3-04 Size 04 (D 02) 320 bar (4600 PSI) 30 L/min (8.0 GPM) HA 4014 09/2013 Replaces HA 4014 10/2010 4/3-, 4/2- way directional control valves with solenoid

More information

PRM7-06. Functional Description HA /2006. Proportional Directional Control Valves. Replaces HA /2002

PRM7-06. Functional Description HA /2006. Proportional Directional Control Valves. Replaces HA /2002 Proportional Directional Control Valves PRM7-6 HA 59 /6 Size D (6)...6 PSI ( bar)...6 GPM ( L/min) Replaces HA 57 / Digital control Compact design Operated by proportional solenoids High sensitivity and

More information

RNEH4-25. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2012

RNEH4-25. Functional Description HA / /2 and 4/3 Way Directional Control Valves Pilot Operated. Replaces HA /2012 4/2 and 4/3 Way Directional Control Valves Pilot Operated RNEH4-25 HA 4024 7/2015 Size 25 (D 08) 320 bar (4600 PSI) 600 L/min (159 GPM) Replaces HA 4024 6/2012 Solenoid pilot operated directional valves

More information

RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.

RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8. R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to

More information

Compact power modules KE, K and KS series

Compact power modules KE, K and KS series Compact power modules KE, K and KS series RE 18306-02 Edition: 02.2016 Replaces: 12.2014 Contents Ordering Details 2 General echnical Data 6 Compact ower odule ype 9.C. Electric otors 10 D.C. Electric

More information

VPN2-10/MR. Functional Description HU /2008. Pilot Operated Pressure Relief Valves. Replaces HU /2005

VPN2-10/MR. Functional Description HU /2008. Pilot Operated Pressure Relief Valves. Replaces HU /2005 Pilot Operated Pressure Relief Valves VPN2-10/MR Size 3/8 (10)...5076 PSI (350 bar)...40 GPM (150 L/min) 7/2008 Replaces 2/2005 Modular and in-line design Five pressure ranges Two pressure adjustment options:

More information

VPP2-04. Functional Description HA /2003. Directly operated pressure relief valves. Replaces HA /2002

VPP2-04. Functional Description HA /2003. Directly operated pressure relief valves. Replaces HA /2002 Directly operated pressure relief valves VPP-04 HA 5093 /003 Size 04, 06 p max up to 30 bar Q max up to 40 L/min Replaces HA 5093 3/00 Screw-in cartridge, modular and in-line design Six pressure ranges

More information

PRM7-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013

PRM7-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013 Proportional Directional Control Valves PRM7-6 / Size 6 (D ) bar (76 PSI) L/min (.6 GPM) Replaces HA 7 / Digital control Compact design Operated by proportional solenoids High sensitivity and slight hysteresis

More information

B8_58 (EDBZ-VEI) RE Edition: Replaces:

B8_58 (EDBZ-VEI) RE Edition: Replaces: 4/3 Directional valve elements 8_58 with or without EDZ-VEI) secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 8_58 EDZ-VEI) RE 183-54 Edition: 2.216 Replaces:

More information

4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve

4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series

More information

Proportional pressure reducing valve of 3-way design Types 3DREP and 3DREPE

Proportional pressure reducing valve of 3-way design Types 3DREP and 3DREPE RE 29 184/12.02 Replaces: 12.98 roportional pressure reducing valve of 3-way design ypes 3DRE and 3DREE Nominal size 6 Series 2X Maximum operating pressure 100 bar Maximum flow 15 L/min H//D 5735/97 ype

More information

4/2- and 4/3-Way Proportional Directional Control Valve Direct Operated, Model 4 WRA (Series 1X) PSI (315 bar) H/A 1768

4/2- and 4/3-Way Proportional Directional Control Valve Direct Operated, Model 4 WRA (Series 1X) PSI (315 bar) H/A 1768 /- and /-Way roptional Directional Control Valve Direct Operated, Model WR (Series X) Size 6 and... 6 SI ( bar).... GM (9 L/min) R 9 /6.98 R 9 /6.98 Replaces:.9 Characteristics: F the open loop control

More information

Differential Lock Valve

Differential Lock Valve Differential Lock Valve Series M..DVV (for 4 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion

More information

Differential Lock Valve

Differential Lock Valve Differential Lock Valve Series M..DVV (for 4 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion

More information

3-way Proportional pressure reducing valve, pilot operated

3-way Proportional pressure reducing valve, pilot operated 01/12 3-way roportional pressure reducing valve, pilot operated 6.6 ype 3DRE(M) and 3DRE(M)E Component series L6X NG 10 and 16 Max pressure 315 bar Max flow: 125L/min(size 10) 300L/min(size 16) Contents

More information

Proportional flow control valve with integrated pressure compensator Type KUDSR

Proportional flow control valve with integrated pressure compensator Type KUDSR roportional flow control valve with integrated pressure compensator ype KUDSR RE 1872 Edition: 12.217 Replaces: 1.216 Size 3 Component series B Maximum operating pressure 35 bar Maximum supply flow 12

More information

Hydraulic pilot control unit of sandwich plate design for the remote control of directional valves, pumps, motors

Hydraulic pilot control unit of sandwich plate design for the remote control of directional valves, pumps, motors Hydraulic pilot control unit of sandwich plate design for the remote control of directional valves, pumps, motors RE 64 55/05.06 1/8 Replaces: 05.03 ype H6 Series 1X Contents Functional description, section

More information

油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189

油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189 ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with

More information

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.

More information

2011 AC & DC Hydraulic. Power Packs Compact. Rotation Ø 15 6,45 3,5 5,7

2011 AC & DC Hydraulic. Power Packs Compact. Rotation Ø 15 6,45 3,5 5,7 Ø 15 6,45 5,7 3,5 11 9 ±. C & DC Hydraulic Rotation ower acks Compact OWER CKS COMCT series ordering code C11/1-1 QUICK SELECTION GUIDE C & DC electric motors DC motors,15 1DC_T 1VDC motor - 15W - Ø 8

More information

Monoblock Directional Control Valve HDM11S/3PQ

Monoblock Directional Control Valve HDM11S/3PQ Monoblock Directional Control Valve djustable priority flow to the first section (for agricultural applications) Reference: 200--991229-EN-00 Issue: 09.2015 1/24 Contents age 1 General information... 3

More information

Proportional pressure reducing valve, 3-way variant, pilot operated

Proportional pressure reducing valve, 3-way variant, pilot operated roportional pressure reducing valve, 3-way variant, pilot operated RE 29286/1.1 Replaces: 2.8 1/14 ypes 3DRE(M) and 3DRE(M)E Sizes 1 and 16 Component series 7X Maximum pressure setting 315 bar (size 1)

More information

Accumulator shut-off block. Type 0532VAW. Contents. Features. RE Edition: Replaces: 07.10

Accumulator shut-off block. Type 0532VAW. Contents. Features. RE Edition: Replaces: 07.10 ccumulator shut-off block ype 0532VW RE 5012 Edition: 2016-06 Replaces: 07.10 Nominal diameter DN20, DN32 Component series 1 Maximum operating pressure 330 bar [400 psi] H7559 Features Ready for connection

More information

Check valve. RE 21536/07.05 Replaces: Type Z1S. Size10 Component series 3X Maximum operating pressure 315 bar Maximum flow 100 l/min 1/6

Check valve. RE 21536/07.05 Replaces: Type Z1S. Size10 Component series 3X Maximum operating pressure 315 bar Maximum flow 100 l/min 1/6 Check valve RE 2536/07.05 Replaces: 05.02 /6 ype ZS Size0 Component series 3X Maximum operating pressure 35 bar Maximum flow 00 l/min H5856 able of contents Contents Page Features Ordering code 2 Standard

More information

SDS400. Sectional directional control valve

SDS400. Sectional directional control valve SDS4 Sectional directional control valve SDS4 Features Sectional directional control valve for high flow, available for fixed displacements hydraulic pumps. From to work sections Open centre Optional carry-over

More information

Axial piston variable pump A11V(L)O series 40

Axial piston variable pump A11V(L)O series 40 xial piston variable pump 11V(L)O series 40 RE 92510 Issue: 10.2014 Replaces: 10.2013 izes 110 to 280 Nominal pressure 350 bar (5100 psi) Maximum pressure 420 bar (6100 psi) Open circuit Characteristics

More information

Meter-in pressure compensator, direct operated

Meter-in pressure compensator, direct operated Meter-in pressure compensator, direct operated RE 94/.07 Replaces: 0.0 / ype ZDC Sizes 0 to Component series Maximum operating pressure bar Maximum flow l/min tb07 able of contents Content age Features

More information

Proportional pressure reducing valve of 3-way design

Proportional pressure reducing valve of 3-way design Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com Electric Drives and Controls Hydraulics Linear Motion and ssembly echnologies neumatics

More information

Fixed Displacement Motor A2FM

Fixed Displacement Motor A2FM rueninghaus Hydromatik Series 6, for use in open and closed circuits xial tapered piston - bent axis design Sizes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91001/01.97 RE 91001/01.97

More information

Fixed Displacement Motor AA2FM (A2FM)

Fixed Displacement Motor AA2FM (A2FM) Fixed Displacement Motor 2FM (2FM) Series 6, for Open and Closed Circuits xial Piston, ent xis Design 5800 psi 6500 psi rueninghaus Hydromatik Sizes 5 1000 Nominal Pressure up to Peak Pressure up to (400

More information

Monobloc and Sectional Directional Control Valves

Monobloc and Sectional Directional Control Valves Monobloc and Sectional irectional Control Valves 200 - - 991210 - - 03/09.2015 1/220 8 Sectional directional control valves HS11 8 valves... p.101 Contents 8.1 General specification 101 8.2 imensional

More information

4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OBE)

4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OBE) 4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OE) ype 4WRDE Nominal size to 35 Component series 5X Maximum operating pressure 3 bar

More information

Directional Control Valves Series D81V. General Description. Operation. Features. Specifications

Directional Control Valves Series D81V. General Description. Operation. Features. Specifications echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves. hey are available in 2 or 3-position styles. hese valves are manifold or

More information

Directional Control Valves. General Description. Operation. Features

Directional Control Valves. General Description. Operation. Features echnical Information General Description W directional control valves are 5-chamber, pilot operated, solenoid controlled valves, hey are available in 2 or 3-position styles. hese valves are manifold or

More information

Control module. Table of contents. RE 51156/05.13 Replaces: Type IH15B

Control module. Table of contents. RE 51156/05.13 Replaces: Type IH15B Control module RE 51156/05.13 Replaces: 09.11 1/96 ype IH15 Component series 1 Maximum operating pressure 350 bar Maximum flow 30 l/min H//D 7228 able of contents Contents age Features 2 Description, general

More information

Pilot operated pressure relief valve

Pilot operated pressure relief valve 0/06 ilot operated pressure relief valve.6 ype ZD/ ZD 6V..L4X Size 6 up to 5bar up to 60 L/min Contents Function and configuration 0 Symbols 0 Specification 0 echnical data 0 Characteristic curves 0 Unit

More information

4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A)

4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A) 4/3-4/2 Directional valve elements B8_A with or without (EDB-A) secondary relief valves, with or without LS connections B8_A (EDB-A) RE 183-56 Edition: 11.218 Replaces: 7.12 Size 4 Series Maximum operating

More information

PVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS

PVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS 14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group

More information

Mobile control block, 6-way version sandwich plate design. Type SM12, series 1X RE /05.03

Mobile control block, 6-way version sandwich plate design. Type SM12, series 1X RE /05.03 RE 64 /05.03 Replaces : 0.0 obile control block, 6-way version sandwich plate design ype S, series X Nominal size aximum pressure, pump side 50 / 350* bar aximum pressure, actuator side 300 / 400* bar

More information

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES

COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief

More information

4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections

4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections 4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 18301-12/07.12 1/10 D8_5 (EDD-XZ) Size 8 Series 00 Maximum pressure (pump side) 310 [4500

More information

Feed Pumps Direct Drive Series 1.1.

Feed Pumps Direct Drive Series 1.1. 1.1. FEED PUMP SERIES FZP AND MFZP 1. GENERAL The feed pump, type FZP, is a direct drive vane pump with constant flow rate. It is available with flanged motor (MFZP) and comes with internal pressure relief

More information

4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)

4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) 4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012

More information

Differential Lock Valve

Differential Lock Valve Differential Lock Valve Series M..DVD (for 3 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion

More information

3/2 and 4/2 directional poppet valve with solenoid actuation

3/2 and 4/2 directional poppet valve with solenoid actuation Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com 3/2 and 4/2 directional poppet valve with solenoid actuation ype M-.SED Size 10 Component

More information

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure

More information

Priority valve Type LPS

Priority valve Type LPS RE 27 548/10.98 riority valve Type LS Nominal sizes 40 to 160 Series 1X Nominal pressure 250 bar Maximum flow 160 L/min. H/AD/5977/98 riority valve type LS... Contents Description age Features 1 Ordering

More information

Steering unit. RE 14365/10.07 Replaces: Type LAGC. Sizes 50 to 630 Component series 1X and 2X Nominal pressure 175 bar Maximum flow 63 l/min

Steering unit. RE 14365/10.07 Replaces: Type LAGC. Sizes 50 to 630 Component series 1X and 2X Nominal pressure 175 bar Maximum flow 63 l/min Steering unit E 14365/10.07 eplaces: 07.03 1/12 ype AGC Sizes 50 to 630 Component series 1X and 2X Nominal pressure 175 bar Maximum flow 63 l/min H6211_d able of contents Content age Features 1 Ordering

More information

2-way flow control valve

2-way flow control valve -way flow control valve RE 864/05. Replaces: 0.03 /8 ype ZFRM Size 6 Component series X Maximum operating pressure 35 bar Maximum flow 3 l/min H5379 able of contents Contents Page Features Ordering code

More information

HYDAC DC Compact Power Units DC1

HYDAC DC Compact Power Units DC1 HYDAC DC Compact Power Units DC1 up to 250 bar up to 18.4 l/min In accordance with EN 60034-1 suitable for short-term operation 981 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Very low noise level due to special

More information

HYDAC (Three-Phase Current) Compact Power Units CO1

HYDAC (Three-Phase Current) Compact Power Units CO1 HYDAC (Three-Phase Current) Compact Power Units CO1 Up to 250 bar Up to 20 l/min In accordance with EN 60034-1 suitable for: Short-term operation: S2 = 5 min* (average value) Intermittent operation: S3

More information

Proportional pressure reducing valve, in 3-way version

Proportional pressure reducing valve, in 3-way version roportional pressure reducing valve, in 3-way version RE 29184/06.11 Replaces: 12.02 1/12 ype 3DRE and 3DREE Size 6 Component series 2X Maximum operating pressure Maximum flow 100 bar 15 l/min able of

More information

Directional Control Valves. Features. Application. Operation

Directional Control Valves. Features. Application. Operation Introduction pplication hydraulic directional control valves are high performance, solenoid controlled, pilot operated, 2-stage, 4-way valves. hey are available in 2 or 3-position styles and are manifold

More information

Fixed Displacement Plug-In Motor A2FE

Fixed Displacement Plug-In Motor A2FE Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Plug-In Motor 2FE RE 9008/03.97 replaces 04.96

More information

Differential Lock Valve

Differential Lock Valve Differential Lock Valve Series M..DV (for 2 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion

More information

Modular Hydro-Pneumatic Suspension System Improving Suspension Performance with a Proper Setup: Quicker and Better Adaptation to Applications

Modular Hydro-Pneumatic Suspension System Improving Suspension Performance with a Proper Setup: Quicker and Better Adaptation to Applications MHS Modular Hydro-neumatic Suspension System Improving Suspension erformance with a roper Setup: Quicker and etter Adaptation to Applications echnical Features p max up to 20 bar (3600 SI) Reduces vibrations

More information

Variable Displacement Open Loop Circuit Axial Piston Pumps AR Series

Variable Displacement Open Loop Circuit Axial Piston Pumps AR Series HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:

More information

Rexroth Hydraulics. Servo directional valve of 4-way design Type 4WS.2EM RE /03.99

Rexroth Hydraulics. Servo directional valve of 4-way design Type 4WS.2EM RE /03.99 RE 29 564/03.99 Replaces: 29 563 Servo directional valve of 4-way design ype 4WS.2EM Nominal size 6 Series 2X Maximum operating pressures 210 / 315 bar Maximum flow 40 L/min H//D 5994/98 ype 4WS2EM 6-2X/.E...K17EV

More information

Grease Lubrication Pump FK

Grease Lubrication Pump FK 1-3033-EN 1-0358-US for use in progressive, single-line and dual-line centralized lubrication systems pplication he FK pump unit is a multi-function piston pump whose modular structure makes it very versatile.

More information

TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E

TPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

PUMP SIZE Flow rate at 1500 rpm lt/min Operating pressures bar

PUMP SIZE Flow rate at 1500 rpm lt/min Operating pressures bar /7 ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications

More information

RA / Radial Piston Motor Model MR, MRE Fixed Displacement. Table of Contents. Replaces: RA /10.95

RA / Radial Piston Motor Model MR, MRE Fixed Displacement. Table of Contents. Replaces: RA /10.95 Radial Piston Motor Model MR, MRE Fixed Displacement Sizes 160 to 9500 6100 PSI (up to 420 bar) 582 in 3 (up to 9542 cm 3 ) 25,075 lb-ft (up to 34000 Nm) RA 15 228/10.95 Replaces: 12.94 Wide range of displacements

More information

LUDV control block in mono block/sandwich plate design M7-20

LUDV control block in mono block/sandwich plate design M7-20 LUDV control block in mono block/sandwich plate design M7-20 RE 64293 Edition: 06.2013 Replaces:. Size 20 Series 3X Maximum operating pressure On the pump side 380 bar On the actuator side 420 bar Maximum

More information

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES

COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main

More information

2/2 way Coaxial valve CXRM compact, pilot operated Modular design

2/2 way Coaxial valve CXRM compact, pilot operated Modular design 2/2 way Coaxial valve CXRM compact, pilot operated Modular design Model code (also example order) CXRM 2/2 F C 2 08 040 038 V Standard NC (closed when de-energised) With external 3/2-way pilot valve 4

More information

Steering unit LAGU. Data sheet

Steering unit LAGU. Data sheet Steering unit LAGU Data sheet Nominal sizes Nominal pressure Maximum flow HE 11867/09.2017 125 320 175 bar 50 l / min 2 LAGU HE 11867 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering

More information

Axial piston variable pump A11V(L)O Series 40

Axial piston variable pump A11V(L)O Series 40 xial piston variable pump 11V(L)O eries 40 RE 92510 Edition: 05.2016 Replaces: 10.2014 izes 110 to 280 Nominal pressure 350 bar (5100 psi) Maximum pressure 420 bar (6100 psi) Open circuit Features Variable

More information

SDH Series. Monoblock and Sectional directional valves

SDH Series. Monoblock and Sectional directional valves SDH Series Monoblock and Sectional directional valves Additional information his catalogue shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information

More information