Pressure Relief Valve
|
|
- Nora Willis
- 6 years ago
- Views:
Transcription
1 ressure Relief Valve For mounting on hydraulic pumps and motors Series ASDF and AGDF S short response times S trouble-free operation S with improved pressure-adjustment resolution S high levels of functionality and stability S low pressure increase and minimal pressure peaks S cost-saving, thanks to direct mounting on hydraulic pumps 1 roduct description 1.1 General Series AS(G) pressure relief valves regulate the operating pressure and flow rate in a hydraulic system and protect it. Regardless of the maximum operating pressure that has been set, the valve can be switched to unloaded bypass via an external pilot port. he pressure relief valves are intended for direct mounting on hydraulic pumps with SAE flange ports. he main components of the valves are a body and a pressure relief cartridge. he pressure-relief valve is a cartridge unit with a seated pilot stage and a spool-type main stage. When the pilot stage is active (R function), the pilot oil is internally drained to port, which should preferably be routed to tank with the least possible back-pressure because any pressure at port is additive to the valve setting. he required pressure can be set with an adjusting screw, which is secured by a lock nut. 1.2 Other applicable documentation odel code Fitted in nominal sizes Data sheet ressure-relief cartridge, size10 series DVA-2.. SAE 1 / 2, SAE 3 / 4 andsae echnical data General characteristics Unit Description, value ype bolt-on valve for SAE flanged ports, seated pilot stage, spool-type main stage, with remote-control port ounting method (standard) interface to SAE J518 code 61 and ISO (mounting bolts are not included in the delivery) Installation attitude unrestricted Flow rate Q max l/min 140 (see performance graph) Operating pressure bar max. 3 Opening pressure for the check valve (type R only) Adjustment range for the pressure-relief function (stepless, manually adjustable) bar 0.3 bar 1 = = = aximum permissible pressure at port bar 20 (the pressure at port is additive to the setting at the pressure-relief adjustment) Reference: EN-04 Issue: /8
2 General characteristics Unit Description, value inimum fluid cleanliness NAS 1638, class 9 or ISO 4406, code 20/18/15 Hydraulic fluid ineral oil to DIN and (other fluids on request) Viscosity range mm 2 /s Fluid temperature range C Body material GGG40 3 Symbol Standard Option with integral check valve odel AGDF only Option with external check valve odel ASDF only 4 erformance graphs (easured at 33 mm 2 /s [cst]) 4.1 p -Qpressure range bar 4.3 p -Qpressure range bar [bar] [bar] Einsatzgrenze Q[l/min] Einsatzgrenze Q[l/min] 4.2 p -Qpressure range bar [bar] 4.4 Leakage from A to B easured at pb = 0 bar, pilot stage closed Q[cm 3 /min] Einsatzgrenze 100 Q[l/min] pa [bar] 2/8 ressure Relief Valves ASDF and AGDF
3 5 Dimensions 5.1 With threaded ports (series AGDF) Size 1 / 2 ø 15 8x60 DIN ( not included in delivery, see 8.1) ø8.5 A =24 Nm Option (..-R*-..) 5A/F A =25 Nm (27 A/F) 17 A/F , =G1/2, =G1/ Size 3 / 4 and x 90 DIN ( not included in delivery see 8.1) A =24 Nm X 25 Option (..-R*-..) A/F 5A/F 45 A =25 Nm (27 A/F) + + Dimension X /4 1 1/4 1/4 22,2 26,2 47,6 52,4 ressure Relief Valves ASDF and AGDF 3/8
4 5.2 With ports for SAE pipe flanges (series ASDF) Size SAE 1 / A=24 Nm A/F A =25 Nm (27 A/F) 5A/F Size SAE 3 / 4 and 1 SAE A=48 Nm 3 RVSAE.. DSAE A/F 70 X 5A/F X A =25 Nm (27 A/F) SAE SAE 3/4 1, = G 1/4 X 22,2 26,2 47,6 52,4 1 Version with check valve and SAE pipe flang at port ( see 8.3) 2 Version with SAE pipe flang at port (see 8.2.2) 3 Version with SAE pipe flang at port (see 8.2.1) 4/8 ressure Relief Valves ASDF and AGDF
5 6 Installation information S ounting bolts for fitting the valve are not included in the delivery S Sealing ring for the flange side (pump) is included in the delivery S Required surface finish of flange pad for mounting the valve 0,01/100 Rz max 4 S ressure adjustment at the pressure relief valve: - ressure range 1: 1 turn = approx. 65 bar - ressure range 2: 1 turn = approx. 38 bar - ressure range 3: 1 turn = approx. 13 bar IORAN! When fitting the valves, use the specified tightening torque for the mounting bolts. he pressure-relief function is factory-set. he setting must be checked. AENION! Only qualified personnel with mechanical skills may carry out any maintenance work. Generally, the only work that should ever be undertaken is to check, and possibly replace, the seals. When changing seals, oil or grease the new seals thoroughly before fitting them. 7 Ordering code A G D F 2-1 / 2 - R * - 0 = 1) SAE bolt-on valve With ports for SAE J518 code 61 (ISO ) flanges With threaded ports ressure-relief function fixed setting = S = G = DF Adjustment range for the pressure-relief function: bar = bar = bar = 3 Nominal size of SAE flange G or S (SAE) 1/2 = 1/2 or threaded ports and G or S (SAE) 3/4 = 3/4 G or S (SAE) 1 = 1/1 Check valve integrated in threaded-port = R (only in models with threaded ports) Without check valve = * Remote-control port = Without port = * Design stage (to be inserted by the factory) 1) Specify the required pressure setting ( max )inplaintext. IORAN! S ounting bolts for fitting the valve are not included in the delivery, they must be ordered separately (see chapter 8.1) S Sealing ring for the flange side (pump) is included in the delivery S SAE pipe flanges and check valves for SAE flange ports must be ordered separately (see chapter 8). ressure Relief Valves ASDF and AGDF 5/8
6 8 Accessories 8.1 Cap screws for series AGDF Description Ordering code for 1 piece Data sheet Cap screws 8x60 - DIN D Cap screws 10x90 - DIN D SAE pipe flanges - max. working pressure 420 bar - interface to SAE J518 code 61 / ISO ounting bolts and O-ring are included with the delivery. hreaded pipe flanges are spot-faced for DIN 2353 pipe fittings. aterial: S SAE pipe flanges for port Ordering code hread Ordering number O. Ring, 90 Shore A Retaining screws DIN / orque Nm RF01-R08 G1/ ,24x2,62 8x30 24 RF02-R10 G3/ ,65x2,62 10x30 48 RF03-R11 G ,99x2,62 10x SAE pipe flanges for port Ordering code hread Ordering number O. Ring, 90 Shore A Retaining screws DIN / orque Nm RF01-R08 ½ ASD G1/ ,24x2,62 8x30 24 RF02-R10 ¾ ASD G3/ ,65x2,62 10x30 48 RF03-R11 1 ASD G ,99x2,62 10x SAE pipe flanges and RVSAE check valves for port Ordering code hread Ordering number O. Ring, 90 Shore A Retaining screws DIN / orque Nm RF02-R10 ¾ + RVSAE ASD G 3/ ,24x2,62 10x RF03-R RVSAE ASD G ,65x2,62 10x /8 ressure Relief Valves ASDF and AGDF
7 9 ossible ordering variants Functions Connection type ump Bolt-on valve With integral check valve With check valve for SAE port 1) Without check valve With remote-control port Without remote-control port QX2. AGDF_-1/2- x x x x hread QX3. AGDF_-3/4- x x x x QX4. AGDF_-1/1- x x x x QX2./117 ASDF_-1/2- x x x SAE J518 QX3./117 ASDF_-3/4- x x x x QX4. ASDF_-1/1- x x x x 10 Installation example 10.1 ASDF with RVSAE on series QXEH42 internal gear pump Cap screw ipe flang Insert plate Check valve Seal plate 10.2 Ordering information for example 10.1 S ressure relief valve = ASDF2-3/4-** S SAE pipe flang for port = RF02-R10 ¾ ( ) S SAE pipe flang and check valve for port = RF02-R10 ¾ + RVSAE ASD ( ) ressure Relief Valves ASDF and AGDF 7/8
8 11 Fluid he pressure relief valves require fluid with a minimum cleanliness level of NAS 1638, class 9 or ISO 4406 code 20/18/15. We recommend the use of fluids that contain anti-wear additives for mixed-friction operating conditions. Fluids without appropriate additives can reduce the service life of the valves. he user is responsible for maintaining, and regularly checking the fluid quality. 12 Fluid cleanliness class Cleanliness class (RK) onto ISO 4406 and NAS 1638 Code ISO 4406 Number of particles / 100 ml 4 m 6 m 14 m NAS /21/ /20/ /20/ /20/ /19/ /18/ /17/ /16/ /15/ /14/ /14/ /13/ /12/ /11/ info.kl@bucherhydraulics.com E 2016 by Bucher Hydraulics GmbH, D Klettgau All rights reserved. Data is provided for the purpose of product description only, and must not be construed as warranted characteristics in the legal sense. he information does not relieve users from the duty of conducting their own evaluations and tests. Because the products are subject to continual improvement, we reserve the right to amend the product specifications contained in this catalogue. Classification: /8 ressure Relief Valves ASDF and AGDF
Differential Lock Valve
Differential Lock Valve Series M..DVV (for 4 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion
More informationDifferential Lock Valve
Differential Lock Valve Series M..DVV (for 4 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion
More informationInternal Gear Unit. for motor/pump function Series QXM. Reference: 100-P US-10 1/18. Issue:
Internal Gear Unit for motor/pump function Series QXM Reference: 1-P-63-US-1 Issue: 1.218 1/18 2/18 1-P-63-US-1/1.218 Contents Page 1 General... 5 1.1 Product description... 5 1.2 Advantages... 5 1.3 Application...
More informationFlow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control
Flow Control Valve Series SRC.. plug-in coil for easy coil change flow rates are unaffected by changes in temperature or load compact design reduced p ZnNi coating (>70h DIN EN ISO 97 NSS) Description.
More informationInternal Gear Unit. for motor/pump function Series QXM. Reference: 100-P EN-10 1/16. Issue:
Internal Gear Unit for motor/pump function Series QXM Reference: -P-63-EN-1 Issue: 1.218 1/16 2/16 -P-63-EN-1/1.218 Contents Page 1 General... 5 1.1 Product description... 5 1.2 Advantages... 5 1.3 Application...
More informationDifferential Lock Valve
Differential Lock Valve Series M..DVD (for 3 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion
More informationFlow Control Valve. 1 Description. 2 Symbols. Series SRCA General. 1.2 Application examples way flow control way flow control
Flow Control Valve Series SRC.. plug-in coil for easy coil change flow rates are unaffected by changes in temperature or load. compact reduced p ZnNi coating (>70h DIN EN ISO 97 NSS) Description. General
More informationProportional Directional Valve System
roportional Directional Valve System in Sectional Design Reference: 31--9589-ENG-2 Issue: 8.215 1/2 Contents age 1 General... 3 1.1 Description... 3 1.2 pplication examples... 3 2 Technical data... 3 3
More informationInternal Gear Unit. for motor/pump service Series QXM. Reference: 100-P EN-07 1/16. Issue:
Internal Gear Unit for motor/pump service Series QXM Reference: -P-63-EN-7 Issue: 8.215 1/16 Contents Page 1 General... 3 1.1 Product description... 3 1.2 Advantages... 3 1.3 Application... 3 1.4 ATEX
More information3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min, p max = 5 bar Bidirectional seat-valve shut-off, direct acting Guided valve spool and poppet Two spool variants are available Available in two mounting
More informationProportional Flow-Control Cartridges, Size 5
Proportional Flow-Control Cartridges, Size Q max = l/min, p max = bar, Q N = l/min at p bar Leak free, load compensated, two stage Description Series MVRPLSA two-stage proportional flow-control cartridges
More informationCheck Valve, Size 04 16
, Size 04 6 Spherical poppet-type, screw-in design Series RKVE -VD 0 l/min, 50 bar for the same pressure differential, Q max. is around 50% higher than with standard RKVE valves no soft seal, therefore
More information2/2 Solenoid Cartridge Valve, Size 10
2/2 Solenoid Cartridge Valve, Size 1 Q max = 8 l/min, p max = 3 bar Seat-valve shut-off, two-stage, monitored operating position 1 Description With integral electronic monitoring of operating position
More informationInternal Gear Pumps. Series QX. Reference: 100-P E-10 1/32. Issue:
Internal Gear Pumps eries QX Reference: -P-000021-E-10 Issue: 11.2011 1/32 2/32 Contents Page 1 General... 5 1.1 Product description... 5 1.2 Advantages... 5 2 Technical data... 5 2.1 General (deviating
More information2/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = l/min (.3 gpm), p max = 3 bar (4 psi) Bidirectional leak-proof shutoff, direct acting, with EX-safty solenoid coil Description Valve: Bidirectional leak-proof
More information2/2 Logic Cartridge Valve, Size 10
2/2 Logic Cartridge Valve, Size 10 Q max = 10 l/min, p max = 420 bar ctive Control, Seated Design ctive control rea ratio 2 : 1 High flow rates with low p Seat-valve shut-off from and No pilot oil consumption
More informationDifferential Lock Valve
Differential Lock Valve Series M..DV (for 2 motors) robust and reliable energy-optimised over the whole flow range simple control compact design offers space-saving installation reliable, uniform motion
More information3/2 Solenoid Cartridge Valve, Size 6
/ Solenoid Cartridge Valve, Size 6 Q max = 4 l/min ( gpm), p max = 5 bar (45 psi) Bidirectional seat-valve shut-off, direct acting Series W.B, WF.B Guided valve spool and poppet Two spool variants are
More information2/2 Cartridge Seat Valve, Size 5
/ Cartridge Seat Valve, Size Q max = l/min, p max = bar Digital valve, bidirectional seat-valve shut-off, direct acting Series WSGD / WSOD For use in digital hydraulics With bidirectional seat-valve shut-off
More information2/2 Logic Cartridge Valve, Size 10
2/2 Logic Cartridge Valve, Size 10 Q max = 10 l/min, p max = 420 bar ctive Control, Seated Design, Soft Switching 1 Description ctive control Soft switching, or soft switching + snap action Seated valve
More informationElectrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1...
Electrically Operated Pressure Relief Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WUVPA 1... 3 l/min, 420 bar Two pressure valve, ON / OFF or HI / LO With internal pilot drain to
More informationHigh Pressure Internal Gear Pumps Series QX
High Pressure Internal Gear Pumps Series QX motion and progress 1 / 32 Classification: 410.10..00 Reference: -P -000021 -E -06 / 05.05 Contents 1 General 1.1 Product description 3 1.2 Advantages 3 2 Technical
More informationLeak-Free Load-Control Valve NS 32, Cartridge Design
Leak-Free Load-Control Valve NS 32, Cartridge Design Q max = 1 l/min, p max = 42 bar Seat-valve, two-stage hydraulic 32--C... 1 Description Whenever large loads are to be precisely moved, placed and held,
More informationElectrically Operated Pressure Relief Cartridge, Size 1 Seated Design, Direct Acting Series WUVA 1LO...
Electrically Operated Pressure Relief Cartridge, Size Seated Design, Direct Acting Series WUVA LO....5 l/min, 40 bar Wet armature solenoid with high pressure core tube and slip on coil Coils can be changed
More informationElectrically Operated Pressure Reducing Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WDRVPA 5...
Electrically Operated Pressure Reducing Cartridge, Size 16 Seated Pilot Stage, Spool Type Main Stage Series WDRVPA... 2 l/min, 3 bar Two pressure valve, HI / LO External pilot drain to port 3 Surface protection:
More informationProportional Pressure Reducing Valve, Size 16 Series DRPSB 5B...
Proportional Pressure Reducing Valve, Size 16 Series DRPSB B... l/min, bar External pilot drain to port 3 Surface protection: Cartridge is chromited, Cr VI free Very stable operation Coil can be changed
More informationFlow Control Valve. 1 Descriptions. 2 Symbols. Series SRCB Generals. 1.2 Application examples way flow control way flow control
Flow Control Valve Series SRC.. plug-in solenoid for easy coil change flow rates are unaffected by temperature change or when the higher load pressure alternates between the outlet ports energy - optimised
More informationPump Safety Block Model DBA... / DBAW, Series 1X
ump Safety lock odel D... / DW, Series X Sizes to 6 SI ( bar) 7 G (65 L/min) R 5 88/.95 Replaces:.9 ermits low pressure start-up and by-pass of pump Direct mounting to SE pressure port of pump Light biasing
More informationIntelligent Lift Control Valve with Electronic Card
Intelligent Lift Control Valve with Electronic Card Q max = 500 l/min, p max = 80 bar Leak-free, two-stage, electronically controlled, without frequency control i50 and i500 Information lift-control valve
More informationProportional Valves MODEL DESCRIPTION FLOW CAVITY 4/3 PROPORTIONAL DIRECTIONAL VALVE 8 GPM C1040 PDFC-4M PDFC-4L
Proportional Valves MODEL DESCRIPTION FLOW CAVITY 4 b a PDFC-4M 4/3 PROPORTIONAL DIRECTIONAL VALVE 8 GPM C040 4 3 b a PDFC-4L 3 3 EPRR-0 PROPORTIONAL PRESS. REDUCING/RELIEVING GPM C030 EPRT-08 PROPORTIONAL
More informationMonoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
More informationCheck Valves, Size Spherical Poppet-type, Screw-in Design Series RKVE l/min, 350 bar (500 bar)
Check Valves, Size 04... 40 Spherical Poppet-type, Screw-in Design Series RKVE... 360 l/min, 350 bar (500 bar) 1 General 1.1 Product description Series RKVE units are screw-in check valves with mounting
More informationPressure Reducing Valve Direct Operated
0/06 Pressure Reducing Valve Direct Operated 3.8 Type ZDR6D...L4X Size 6 Up to 0 bar Up to L/min Contents Function and configurations 0 Symbols Specification Technical data 04 Unit dimensions 05 Features
More informationFunctional Description HA /2008. Hydraulic Power Units SMA 05. Replaces HA /2007. p max up to 250 bar Q max up to 17 L/min
Hydraulic ower Units S 05 p max up to 250 bar Q max up to 17 L/min H 7212 6/2008 Replaces H 7212 10/2007 Compact power packs for the use in lifting platforms, elevating tables, ramps, presses, machine
More informationOpen center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
More informationMonoblock Directional Control Valve HDM11S/3PQ
Monoblock Directional Control Valve djustable priority flow to the first section (for agricultural applications) Reference: 200--991229-EN-00 Issue: 09.2015 1/24 Contents age 1 General information... 3
More informationunrestricted; preferably with coil at bottom (auto. air bleed) 12 or 24 Volt DC from an electronic controller Deutsch plug - IP67
3 Technical data General characteristics Design Flow direction Seals De-energized position Mounting attitude Description, value, unit line mounting P A controlled P R surplus flow discharge (models shown
More informationPilot Operated Pressure Relief Valve Series R5V (Denison)
Characteristics Pilot operated pressure relief valves series R5V have a similar design to the subplate mounted R4V series. The SAE flanges allow to mount the valves directly on the outlet flanges of pumps
More informationPriority valve LPS. Data sheet. Series 1 x
Priority valve LPS Data sheet Nominal sizes 40 160 Series 1 x Maximum flow 40 160 l / min HE 27548 / 10.2017 2 LPS HE 27548 / 10.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details
More informationDIRECT ACTING PRESSURE RELIEF VALVE Model : DPR
A olyhydron Group Company Description DIREC ACING RESSURE RELIEF VALVE Model : DR of 6 Ref. No. Release 05 / 24 Direct acting valve. Guided poppet design. Cushion arrangement for greater stability and
More informationFixed Displacement Motor A2FM
rueninghaus Hydromatik Series 6, for use in open and closed circuits xial tapered piston - bent axis design Sizes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91001/01.97 RE 91001/01.97
More informationDirectional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
More informationPressure sequence valve, direct operated
ressure sequence valve, direct operated RE 26076/04.07 Replaces: 02.03 /6 Type DZ 6 D Nominal size 6 Series 5X aximum operating pressure 315 bar aximum flow 60 l/min K 4297-9 Overview of contents Contents
More informationPressure Reducing Valves
5 Pressure Reducing Valves MODEL DESCRIPTION FLOW CAVITY PAGE NO. 3 PRPS-0 PRESSURE REDUCING VALVE GPM C030 5-0.0 3 PRRS-08 PRRS-0 PRRS- 6 GPM GPM 4 GPM C0830 C030 C30 5-0.0 5-0.0 5-03.0 Reference: 50-P-050000-EN-00/09.05
More informationRE / Central Hydraulics Valve LT43 for Tractors with Priority Function for Steering and Trailer Brake and Pilot Oil Valve.
Central Hydraulics Valve LT43 for Tractors with Priority Function for Steering and Trailer Brake and Pilot Oil Valve RE 66 235/07.95 Characteristics Input element with priority and pilot oil valve for
More informationHydraulic Fixed Piston Rexroth A2FE Motor
Hydraulic Fixed Piston Rexroth A2FE Motor Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement
More informationDIRECT ACTING PRESSURE RELIEF VALVE DPR
DIREC ACING RESSURE RELIEF VALVE DR Ref. No. 4896 Release 2/25 Description Direct acting valve. Guided poppet design. Cushion arrangement for greater stability and noise control. hree sizes. - 6, and 2.
More information250 bar P max. Technical Features. Functional Description
Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations
More informationSteering unit. RE 14365/10.07 Replaces: Type LAGC. Sizes 50 to 630 Component series 1X and 2X Nominal pressure 175 bar Maximum flow 63 l/min
Steering unit E 14365/10.07 eplaces: 07.03 1/12 ype AGC Sizes 50 to 630 Component series 1X and 2X Nominal pressure 175 bar Maximum flow 63 l/min H6211_d able of contents Content age Features 1 Ordering
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More informationPressure sequence valve, direct operated
Courtesy of C/Flodyne/Hydradyne otion Control Hydraulic neumatic Electrical echanical (800) 426-5480 www.cmafh.com ressure sequence valve, direct operated Type DZ 6 D Nominal size 6 Series 5X aximum operating
More informationPilot operated pressure relief valve
0/06 ilot operated pressure relief valve.6 ype ZD/ ZD 6V..L4X Size 6 up to 5bar up to 60 L/min Contents Function and configuration 0 Symbols 0 Specification 0 echnical data 0 Characteristic curves 0 Unit
More informationMOTORS MV HYDRAULIC MOTORS T E C H N I C A L C A T A L O G
OTORS V HYDRAULIC OTORS T E C H N I C A L C A T A L O G otors V - Hydraulic otors POCLAIN HYDRAULICS OVERVIEW Displacement Speed V2 V3 aximum cm³/rev [in³/rev.] From 3 [2.14] to 3 [3.23] From [3.3] to
More informationHydraulics. Axial Piston Pumps Series PVP. Introduction. With thru shaft option for multiple pump options Swash plate type for open circuit
Introduction *not included Pump with standard compensator, code: "omit" With thru shaft option for multiple pump options Swash plate type for open circuit Pump with load sensing, code: "A" Mounting style
More informationAccumulator shut-off block. Type 0532VAW. Contents. Features. RE Edition: Replaces: 07.10
ccumulator shut-off block ype 0532VW RE 5012 Edition: 2016-06 Replaces: 07.10 Nominal diameter DN20, DN32 Component series 1 Maximum operating pressure 330 bar [400 psi] H7559 Features Ready for connection
More informationLUDV control block of sandwich plate design
LUDV control block of sandwich plate design RE 64125/02.11 Replaces: 01.10 1/22 ype SX 14, SX 14 S Nominal size 14 Series 2X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar
More informationPriority valve Type LPS
RE 27 548/10.98 riority valve Type LS Nominal sizes 40 to 160 Series 1X Nominal pressure 250 bar Maximum flow 160 L/min. H/AD/5977/98 riority valve type LS... Contents Description age Features 1 Ordering
More informationVPN1-06. Functional Description HA /2008. Pilot Operated Pressure Relief Valves. Replaces HA /2002
Pilot Operated Pressure Relief Valves VPN-06 HA 56 4/2008 Size 06 p max up to 320 bar Q max up to 70 L/min Replaces HA 56 3/2002 Cartridge, modular and in-line design Five pressure ranges Two pressure
More informationLogic elements. Differential pressure sensing elements for applications up to 350 bar (5000 psi) and 400 L/min (100 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Logic elements Differential pressure sensing elements for applications up to 50 bar (5000 psi) and 400 L/min (00 USgpm) Logic elements LOGC ELEMENTS... -4 APPLCATON
More informationProportional flow control valve with integrated pressure compensator Type KUDSR
roportional flow control valve with integrated pressure compensator ype KUDSR RE 1872 Edition: 12.217 Replaces: 1.216 Size 3 Component series B Maximum operating pressure 35 bar Maximum supply flow 12
More informationDirectional Control Valve Series 4D01 (DENISON)
Characteristics The Denison series 4D01 is a solenoid operated directional control valve size NG06 in -chamber design. It is direct operated by wet pin solenoids. The 4D01 is available with a Soft Shift
More informationSteering unit LAGC. Data sheet
Steering unit LAGC Data sheet Nominal sizes Series Maximum flow HE 14365 / 09.2017 40 1000 1 x and 2 x 80 l / min 2 LAGC HE 14365 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
More information4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OBE)
4/3-way high response directional control valve pilot operated with electrical feedback and integrated electronics (OE) ype 4WRDE Nominal size to 35 Component series 5X Maximum operating pressure 3 bar
More informationProportional pressure reducing valve, 3-way variant, pilot operated
roportional pressure reducing valve, 3-way variant, pilot operated RE 29286/1.1 Replaces: 2.8 1/14 ypes 3DRE(M) and 3DRE(M)E Sizes 1 and 16 Component series 7X Maximum pressure setting 315 bar (size 1)
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
More informationFixed Displacement Plug-In Motor A2FE
Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Plug-In Motor 2FE RE 9008/03.97 replaces 04.96
More informationRA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.
R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to
More informationPilot-Operated Directional Control Valves Series D3 - D11
Catalogue HY11-500/UK Characteristics The D31, D41, D81, D91 and D111 are electrical controlled 4/3 or 4/ way directional control valves. The valves are pilot-operated by an NG6 valve. Pressure and flow
More informationRexroth Hydraulics. Pressure reducing valve, pilot operated, type 3DR 3DR 10 P 6X Y 00 RE /10.97
RE 26 915/10.97 Replaces: 01.97 Pressure reducing valve, pilot operated, type 3DR Nominal size 10 Series 6X Maximum operating pressure 315 bar Maximum flow 120 L/min Contents H/A/D 5845/97 ype 3DR 10 P5-6X/315Y/00M
More informationDirectional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
More informationModular Unit 6MB HYDRANOR MODULAR UNIT 6MB GENERAL DESCRIPTION. 6MB-200-**-2C General Arrangement. Rev
MODULAR UNIT 6MB GENERAL DESCRIPTION Figure 1 6MB-200-**-2C General Arrangement Rev. 5 5.1.1 Figure 2 General Arrangement 6MB-650-**-2C The Modular Units 6 MB is a complete unit for controlling of hydraulically
More informationSteering unit LAGU. Data sheet
Steering unit LAGU Data sheet Nominal sizes Nominal pressure Maximum flow HE 11867/09.2017 125 320 175 bar 50 l / min 2 LAGU HE 11867 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering
More informationDirectional Controls
Vickers Directional Controls Mechanical ctuators Directional Control Valves Directional Control Valves 310 bar (4500 psi) Flows to 114 l/min (30 USgpm) NF D05, ISO-4401-05 DG1V4-01**-10 Knob Operated DG17V4-01**-10
More informationPilot Operated Directional Control Valves Series D1VP, D3DP, D4P, D9P, D11P
Characteristics Series D1VP, D3DP, D4P, D9P, D11P The D1VP is a hydraulically controlled 4/3 or 4/ way directional control valve. The valve can be operated either by the pilot ports X and Y via the subplate
More informationPilot Operated Directional Control Valves Series D31DW, D41VW - D111VW
Characteristics The D31, D41, D81, D91 and D111 are electrically controlled 4/3 or 4/ way directional control valves. The valves are pilot operated by an NG6 valve. Pressure and flow of the pilot oil have
More informationAPV Load Sensing Valve
www.k-fluidpower.com V Load Sensing Valve V0: V6: V 22: V 32: Max. flow: port 60 l/min 260 l/min 660 l/min 2000 l/min port / 80 l/min 50 l/min 380 l/min 800 l/min Max. pressure: port // 350 bar 420 bar
More informationFixed Displacement Pump A2FO
RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95
More information3/2 and 4/2 directional seat valves with solenoid actuation
1/16 3/ and 4/ directional seat valves with solenoid actuation RE 047-XH-B/01.10 Replaces: 09.07 ype E-.SE 6...XH ype W-.SE 6...XH Size 6 Component series 6X Maximum operating pressure 40 bar Maximum flow
More informationPilot Operated Directional Control Valves Series D31DW, D31NW, D*1VW
Characteristics The pilot operated valves are available in 4 sizes: D31DW NG10 (standard) D31NW NG10 (high flow) D41VW NG16 D81VW NG5 (for port diameter up to 6 mm) D91VW NG5 (for port diameter up to 3
More informationSystem Solutions for Crane Controls
System Solutions for Crane Controls System overview Reference: 100-P-000169-EN-01 Issue: 04.2017 1/16 2/16 Contents Page 1 General... 5 1.1... 5 1.2 System... 5 1.3 Valve models... 6 2 Valve overview...
More informationPressure relief valve, pilot-operated. Type DB and DBW. Features. Contents. RE Edition: Replaces:
ressure relief valve, pilot-operated ype D and DW RE 580 Edition: 017-0 Replaces: 016-1 Size 10 Component series 5 Maximum operating pressure 50 bar Maximum flow 650 l/min H6088+H6089 Features For subplate
More informationSDH Series. Monoblock and Sectional directional valves
SDH Series Monoblock and Sectional directional valves Additional information his catalogue shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information
More informationDISC VALVE HYDRAULIC MOTORS
LHS LH LHV DISC VALVE HYDRAULIC CONENS Page Hydraulic otors Series LHS... 4 Hydraulic otors Series LH... 2 Hydraulic otors Series LHV... 9 Hydraulic otors Series LHHW... 1 otor Special Features... 7 otors
More informationPRESSURE CONTROLS TECNORD
Pressure Reducing / Relieving Valves GPM PSI LPM BAR MODEL PAGE 1 4 38 276 DF-PRP 174 2 3 76 27 SK-PRP 176 1 4 38 276 DF-PWP 178 Typical Schematic Typical application for the PRP and PWP is multi-system
More information4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series
More informationHYDRAULIC MOTORS HP APPLICATION GENERAL. » Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines
HYDRAULIC HP APPLICAION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» extile machines» Agricultural machines» Food industries» Grass cutting machinery etc. CONENS Specification
More informationGear Type Flow Meter VC
Gear Type Flow eter VC 2 RACHT COR. 6552 Weatherfield Court aumee, OH 43537 USA +1 419 874 F +1 419 874 6 flowmeters@krachtcorp.com www.krachtcorp.com Construction and Function 3 4 5 6 2 1 7 Construction
More informationSteering unit LAGZ. Data sheet. Series 2 x
Steering unit LAGZ Data sheet Nominal sizes 125 620 Series 2 x Maximum flow 50 l / min HE 11868 / 09.2017 2 LAGZ HE 11868 / 09.2017 Page Content 4 4 5 6 7 8 9 10 11 12 13 14 Features Ordering details Function,
More information4/3 Proportional directional valve elements L85P5 with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING
/ Proportional directional valve elements L8P with proportional (EDC-IP) hydraulic control and flow sharing control (LUDV concept) PATENT PENDING L8P (EDC-IP) RE 8- Edition:.6 Replaces: 7. Size 6 Series
More information4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 18301-12/07.12 1/10 D8_5 (EDD-XZ) Size 8 Series 00 Maximum pressure (pump side) 310 [4500
More informationProportional Pressure Reducing Valves Series PE*W (Parker), R4R (Denison)
Characteristics / Technical Data Series PE*W (Parker), RR (Denison) Subplate mounted proportional pressure reducing valves are available with both Parker (series PE*W) and Denison (series RR) model codes.
More information4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)
4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012
More informationVINCKE HYDRAULIC PUMPS
: VNK BA10VS 21 Variable displacement axial piston pump of swashplate design for hydraulic open circuit systems. Flow is proportional to drive speed and displacement. It can be infinitely varied by adjustment
More informationIsolator Sandwich Plate
Isolator Sandwich late CEO Model code (also order example) KH4K DN10 CEO 5302 09 X Symbol DN 06 Designation KH4K = 4-gallery isolator ball valve KH6K = 6-gallery isolator ball valve Nominal bore DN06 DN10
More informationHYDRAULIC MOTOR-BRAKE B/MR
HYDRAULI APPLIAION onveyors Feeding mechanism of robots and manipulators Metal working machines extile machines Agriculture machines Food industries Mining machinery etc. ONENS Specification data... 22
More informationPressure Compensator Valves Series R5P (SAE Flange Mounted) General Description. Features
Technical Information General Description Series R5P direct operated, 3-way pressure compensators can be combined with any type of fixed or adjustable flow resistor (throttle) to provide a load compensated
More informationSectional Directional Control Valve RSQ 240
Sectional Directional Control Valve RSQ 0 Key valve features RSQ 0 is a sectional open center valve, designed for max. operating pressures up to 50 bar and max. pump flows up to 00 l/min. It is available
More informationPressure relief valve, direct operated. Type ZDBY D, Z2DBY D. Features. Contents. RE Edition: Replaces: 01.09
Pressure relief valve, direct operated ype ZDBY D, ZDBY D RE 5 Edition: -8 Replaces:.9 Size 6 Component series X Maximum operating pressure 35 bar Maximum flow 6 l/min tb3 Features Contents Sandwich plate
More informationBW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
More information