EUF/EUFS series. Fire Pump PSB Listed according to CP52(Singapore)

Transcription

1 ANNEX 1: SPECIMEN OF LOGO and MARK A) SETSCO (Registered) Logo where innovation f l ow s B) SETSCO Mark for Ready-Mixed Concrete Cert No: RMC-YYYY-XXX-A C) SETSCO Mark for Fire Safety Products Fire Pump PSB Listed according to CP52(Singapore) Cert No: FSP-YYYY-XXX Remarks: YYYY year of initial certification XXX unique number A site number SETSCO Certification Body S-01 Terms and Conditions, Sept Australian Standard: AS 2941:2008 Fixed Fire Protection Installation and Pumpset System

2 Coding System Series EUF = Bareshaft Firepumps EUFS = High Pressure Series Discharge Size Nominal Size Seal Type P = Gland Packing / Body Casing Material BC = Bronze impeller and Cast Iron Body WW = Cast steel impeller and cast steel Body BD = Bronze and Ductile Iron Body SC = SS304 impeller and Cast Iron Body SD = SS304 impeller and Ductile Iron Body Special Code DB = Double Bearing OL = Oil Lubricator K6 = SS316 Shaft S4 = SS304 Shaft S1 = SS431 Shaft E.g. EUFS100/315 PBD DB XXXX XXX/XXX X XX XXXX Introduction Description: Volute casing centrifugal end suction pump with Back Pull-Out (BPO) feature, main dimensions and performance according to EN733/DIN24255/6 standards (EUF), ISO 2858/5199 (EUFS). Flange : Std PN 16, PN 25, 40 Bar (optional) Materials : Cast Iron, Ductile Iron, Cast Steel Mounting : Direct Coupled with Electric Motor or Engine Direction of Rotation : Clockwise as viewed from the drive side Material : Casing : Ductile Iron, Cast Steel, Cast Iron : Bronze Shaft : SS420 optional AISI304 & AISI316 Shaft Seal : Gland Packing Operating Range : Flow Rate(Q) : up to 1100m3/h Head(H) : up to 290m Speed : 2900 rpm (50Hz) Operating Temp. : -10 C to 105 C standard; Operating Pressure : 16 Bar (EUF) and 40 Bar (EUFS) Application: Fire protection and fire fighting

3 EUF Sectional Drawing Shaft Protection Sleeve (with Gland Packing Only) Replaceable Shaft Sleeves can be replaced due to damaged and also different metallurgy for various operational needs. Back Pull-Out design allow removal of wet Ends from the casing without disturbing the pipe connection. A built-in oil reservoir designed for oil cooled bearing requirement as option. Gland Packing Gland Packing with Lantern Ring for proper cooling and Flushing during operation. Volute Casing Self Venting design and cased in Ductile Cast Iron as standard. Maximum working pressure of 16 Bars. Dynamically Balanced for smooth operation that improve mechanical durability for optimum usage and Hydraulically balanced by means of balancing holes to reduces turbulence and recirculation to ensure smooth performance across entire operating range. Ball bearings Heavy Duty Deep Grooved Ball bearing are used to maintain rigidity and stability. This is further enhanced with a Double Roll Bearing located on the Non-Drive End to give additional support to the impeller and Seals due to the nature of operation. Casing Wear Rings Renewable wear ring protects the casing from wear and allows for optimum efficiency at all times of the pump life and reduces maintenance cost, with a simple wear ring replacement. EUFS Sectional Drawing Heavy duty casting to reduce vibration and adding surfact are (Fins) to improve dissipating of heat from high speed operation to prolong bearing life Oil Flinger EUFS uses oil mist lubricating for better heat dissipation from the bearing for longer bearing live and improve mean Time Between Failure (MTBF ) Gland Packing Gland Packing with Lantern Ring for proper cooling and Flushing during operation. Dynamically Balanced for smooth operation that improve mechanical durability for optimum usage and Hydraulically balanced by means of balancing holes to reduces turbulence and recirculation to ensure smooth performance across entire operating range. Volute Casing Self-venting casing built for max allowable pressure of 25 bars with option for 40 bars 40 bars (shut off above 22bar, casting is center lined supported) Ball Bearing SKF roller bearing and angular contact bearing to handle both radial /axial load when operating less than ideal condition Shaft Protection Sleeve (with Gland Packing Only) Replaceable Shaft Sleeves can be replaced due to damaged and also different metallurgy for various operational needs. Casing Wear Ring Double wear ring design allows for max. hydraulic performance and mechanical efficiency within the pumps and economical sacrificial wear part

4 EUF/EUFS Performance - 50Hz S/N Pump model Diameter Duty Point Q (m3/h) Head (m) Power (kw) Efficiency (%) Driver Power (kw) 1 EUF EUF EUF EUF EUF EUF EUF EUF EUF EUF EUF EUF EUF EUF EUFS EUFS EUFS EUFS EUFS EUFS EUFS EUFS

5 EUF Installing Dimensions a f h2 l u h1 c t d b n3 n2 n1 øs1 m2 m1 w 6 ø14 FRONT ELEVATION SIDE ELEVATION Pump Model Discharge Suction Pump Dimension Foot Dimension Shaft End a f h1 h2 b c n3 m1 m2 n1 n2 s w d l t u Net Weight EUF50/ EUF50/ EUF50/ EUF50/ EUF50/ EUF65/ EUF65/ EUF65/ EUF65/ EUF80/ EUF80/ EUF80/ EUF100/ EUF100/

6 EUFS Installing Dimensions h1 h2 e f l d y h3 d u t s1 n2 n1 b m2 m1 w s2 FRONT ELEVATION SIDE ELEVATION Pump Model Discharge Suction Pump Dimensions Foot Dimension Shaft End e f h2 h3 h1 m1 m2 n1 n2 b s1 s2 w y d l t u Net Weight EUFS EUFS EUFS EUFS * EUFS EUFS * EUFS EUFS EUFS * EUFS EUFS * EUFS * For low speed 1450rpm + Suggest use centerline type for pressure above 22bar at shut off head Euroflo Pumps International Pte Ltd No.1 Joo Koon Way Singapore Tel: Fax: EUF-EUFS / APR 13