SDH Series. Monoblock and Sectional directional valves
|
|
|
- Stella Quinn
- 5 years ago
- Views:
Transcription
1 SDH Series Monoblock and Sectional directional valves
2 Additional information his catalogue shows the product in the most standard configurations. lease contact Sales Dpt. for more detailed information or special request. WARNING! All specifications of this catalogue refer to the standard product at this date. Walvoil, oriented to a continuous improvement, reserves the right to discontinue, modify or revise the specifications, without notice. WALVOIL IS NO RESONSIBLE FOR ANY DAMAGE CAUSED BY AN INCORREC USE OF HE RODUC. 1 st edition December
3 Index Contents General Working conditions Contents Monoblock Valves Valve Configurations SDH SD5/1 HBN SD5/1 HBD SDH SDH Sectional Valves Valve Configurations SDH SDH SDH General Working Conditions his catalogue shows technical specifications and diagrams measured with mineral oil of 46mm 2 /s viscosity 40 C F temperature. Hydraulic fluid:... mineral based oil Fluid temperature with NBR (BUNA-M) seals: C/+80 C (-4 F/+176 F) Ambient temperature for working conditions with mech.devices: C/+60 C (-40 F/+140 F) Viscosity operating range from 15 to 75 mm 2 /s:... min.12 - max.400 mm 2 /s (cst) Max level of contamination:... - /19/16 - ISO 4406 (NAS class 10) AENION! All Walvoil components must be used within the parameters shown in this catalog. he use exceeding these limits is dangerous and must be avoided because it may cause incorrect working and limit the product life. he standard valves are supplied with main relief valves set at 120 bar (1750 psi), 10 l/min (2.64 US gpm) flow, with adjustment range up to 200 bar (2900 psi). Walvoil is not responsible for any damage caused by an incorrect use of the product. All specifications of this catalog refers to the standard product at this date. Walvoil, oriented to a continuous improvement, reserves the right to discontinue, modify or revise the specifications, without notice. NOE - For different conditions please contact Sales Dpt. 3
4 Contents Content Monoblock valves Main Characteristics ype Nominal Flow Nominal ressure Nr of Spool diameter Spool stroke Circuit spools l/min US gpm bar psi mm in mm in SDH arallel _ _ 0.21 SD5/1-HBN SD5/1-HBD arallel _ _ 0.21 SDH5/ SDH arallel _ 7 + _ 0.27 Sectional valves Main Characteristics ype Nominal Flow Nominal ressure Number of Spool diameter Spool stroke Circuit spools l/min US gpm bar psi mm in mm in SDH arallel _ _ 0.21 SDH arallel _ 7 + _ 0.27 SDH arallel _ 7 + _
5 Monoblock valves Valve Configurations Spools And Main Relief valves Spools Spool Control kits 1 Double acting, 3 positions, with A and B closed in neutral position. 8 Spring centered in neutral position. Main Relief Valves VMD5 (JG) ( SDH4 & SDH5) Spring nr.3 (blue band) VMD10 (YG) ( SDH14 ) Spring nr.3 (blue band) (bar) (psi) (bar) (psi) ressure ressure Flow (l/min) Flow (l/min) Codes Available art Number Description SDH4/1(JG3-120)/1C8L 2021D D0012 SD5/1-HBN(JG3-120)/18L SD5/1-HBD(JG3-120)/18L SDH5/2-(JG3-120)/18L/18L/AE SDH5/3-(JG3-120)/18L/18L/18L/AE SDH5/4-(JG3-120)/18L/18L/18L/18L/AE SDH14/1(YG3-120)/1C8L 5
6 0 SDH4 Monoblock valves SDH4 Dimensional Data SDH4 valve is without load check valve.standard configuration is with positive spool (45.5) (1.79) A B M osition 1 osition 0 osition 2 NOE: Drawings and dimensions are referred to BS thread configuration. Nominal Flow Nominal ressure Max back pressure Internal leakage at 100 bar (1450 psi) Weight SANDARD HREADS l/min US gpm bar psi bar psi cm 3/min in 3/min kg lb orts BS G3/8 A-B G3/8 Hydraulic circuit A B 120 bar ressure drops pressure drop A(B) pressure drop A(B) pressure drop 6
7 0 Monoblock valves SD5 SD5/1 HBN Dimensional Data A B M NOE: Drawings and dimensions are referred to BS thread configuration osition 1 osition 0 osition 2 NOE: Carry-over not available for this configuration. Nominal Flow Nominal ressure Max back pressure Internal leakage at 100 bar (1450 psi) Weight SANDARD HREADS 3 3 l/min US gpm bar psi bar psi cm /min in /min kg lb orts BS G3/8 A-B G3/8 Hydraulic circuit A B 120 bar ressure drops pressure drop A(B) pressure drop A(B) pressure drop 7
8 0 SD5 Monoblock valves SD5/1 HBD Dimensional Data NOE: No carry-over joint admitted in this configuration A B M C NOE: Drawings and dimensions are referred to BS thread configuration osition 1 osition 0 osition 2 Nominal Flow Nominal ressure Max back pressure Internal leakage at 100 bar (1450 psi) Weight SANDARD HREADS 3 3 l/min US gpm bar psi bar psi cm /min in /min kg lb orts BS C G3/8 A-B G3/8 Hydraulic circuit A B C 120 bar ressure drops pressure drop A(B) pressure drop A(B) pressure drop 8
9 0 Monoblock valves SDH5 SDH5 Dimensional Data E F A1 A (185) (7.28) (45.5) (1.79) B1 B2 M osition 1 osition 0 osition NOE: Drawings and dimensions are referred to BS thread configuration. Nominal Flow Nominal ressure Max back pressure Internal leakage at 100 bar (1450 psi) 3 3 l/min US gpm bar psi bar psi cm /min in /min SANDARD HREADS orts BS - G3/8 A-B G3/8 ype E F Weight mm in mm in kg lb Hydraulic circuit A1 B1 A2 B2 SDH5/ SDH5/ SDH5/ bar ressure drops pressure drop A(B) pressure drop A(B) pressure drop 9
10 0 SDH14 Monoblock valves SDH14 Dimensional Data A (239.3) (9.42) (70.3) (2.77) B M osition 1 osition 0 osition 2 SDH14 valve is without load check valve.standard configuration is with positive spool. NOE: Drawings and dimensions are referred to BS thread configuration Nominal Flow Nominal ressure Max back pressure Internal leakage at 100 bar (1450 psi) Weight SANDARD HREADS 3 3 l/min US gpm bar psi bar psi cm /min in /min kg lb orts BS G3/4 A-B G3/4 Hydraulic circuit A B 120 bar ressure drops pressure drop A(B) pressure drop A(B) pressure drop 10
11 Sectional valves Valve Configurations Spools And Main Relief valves Spools Spool Control kits 1 Double acting, 3 positions, with A and B closed in neutral position. 2 Spring centered in neutral position. Main Relief Valves VMD5 (JG) ( SDH6) Spring nr.3 (blue band) VMD10 (YG) ( SDH8 ) Spring nr.3 (blue band) VM20 (XGN) ( SDH180 ) From 60 to 250 bar / from 870 to 3600 psi ressure (bar) (psi) ressure (bar) (psi) ressure (bar) max. setting standard setting min. setting (psi) Flow (l/min) Flow (l/min) Flow (l/min) Codes Available art Number Description SDH6/2/AC(JG3-120)/18L/18L/RC SDH6/3/AC(JG3-120)/18L/18L/18L/RC SDH6/4/AC(JG3-120)/18L/18L/18L/18L/RC SDH6/6/AC(JG3-120)/18L/18L/18L/18L/18L/18L/RC SDH8/2/AC(YG3-175)/18L/18L/RC SDH8/3/AC(YG3-175)/18L/18L/18L/RC SDH8/4/AC(YG3-175)/18L/18L/18L/18L/RC SDH180/2/AC(XGN-210)/1D8L/1D8L/RC SDH180/4/AC(XGN-175)/1D8L/1D8L/1D8L/18L/RC 11
12 0 SDH6 Sectional valves SDH6 Dimensional Data E F (198) (7.79) 112 (45.5) (1.79) A1 A2 B1 B M M osition 1 osition 0 osition 2 NOE: Drawings and dimensions are referred to BS thread configuration. Nominal Flow Nominal ressure Max back pressure Internal leakage at 100 bar (1450 psi) 3 3 l/min US gpm bar psi bar psi cm /min in /min SANDARD HREADS orts BS G3/8 A-B G3/8 G1/2 ype E F Weight mm in mm in kg lb Hydraulic circuit A1 B1 A2 B2 SDH6/ SDH6/ SDH6/ SDH6/ SDH6/ SDH6/ bar ressure drops pressure drop A(B) pressure drop A(B) pressure drop 12
13 0 Sectional valves SDH8 SDH8 Dimensional Data E F (257.6) (10.14) A1 A2 M8 B1 B (70.1) (2.75) M osition 1 osition 0 osition 2 NOE: Drawings and dimensions are referred to BS thread configuration. Nominal Flow Nominal ressure Max back pressure Internal leakage at 100 bar (1450 psi) 3 3 l/min US gpm bar psi bar psi cm /min in /min SANDARD HREADS orts BS G1/2 A-B G1/2 G3/4 ype E F Weight mm in mm in kg lb Hydraulic circuit A1 B1 A2 B2 SDH8/ SDH8/ SDH8/ SDH8/ SDH8/ SDH8/ bar ressure drops pressure drop A(B) pressure drop A(B) pressure drop 13
14 0 SDH180 Sectional valves SDH180 Dimensional Data E F A1 A B1 B osition 1 M osition 0 osition 2 NOE: Drawings and dimensions are referred to BS thread configuration. Nominal Flow Nominal ressure Max back pressure Internal leakage at 100 bar (1450 psi) 3 3 l/min US gpm bar psi bar psi cm /min in /min SANDARD HREADS orts BS G3/4 A-B G3/4 G1 ype E F Weight mm in mm in kg lb Hydraulic circuit A1 B1 A2 B2 SDH180/ SDH180/ SDH180/ SDH180/ SDH180/ SDH180/ bar ressure drops pressure drop A(B) pressure drop A(B) pressure drop 14
15 Notes Notes 15
16 1 st edition December
COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES Features Simple, compact designed, this valve is only one section for open center and closed center hydraulic systems. H Fitted with a main pressure relief
COMPACT CATALOG MONOBLOCK DIRECTIONAL CONTROL VALVES
COMAC CAALOG MONOBLOCK DIRECIONAL CONROL VALVES SD4 Features Simple, compact designed, this valves is only one section for open center and closed center hydraulic systems. H Fittedwithamainpressurereliefvalve.
COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure
COMPACT CATALOGUE SECTIONAL DIRECTIONAL CONTROL VALVES
COMAC CAALOGUE SECIONAL DIRECIONAL CONROL VALVES SDS5 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main
Monoblock directional control valves DL - Directional control valve
Monoblock directional control valves DL - Directional control valve DL Before use, carefully read the GENERAL INSRUCIONS FOR USE OF DIRECIONAL CONROL VALVES 398SMD008I00-06-2-208 DL echnical data Nominal
SDS400. Sectional directional control valve
SDS4 Sectional directional control valve SDS4 Features Sectional directional control valve for high flow, available for fixed displacements hydraulic pumps. From to work sections Open centre Optional carry-over
TESTO ITC KORINNA 28mm Allargato LOAD SENSING MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 28mm llargato LOD SENSING MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed 2 sections monoblock valve, for hydraulic systems with load sensing variable displacement
MDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
HV SERIES. Manual/ Proportional Directional Valves HV9 HV39 HV18. EPHV39 Lever Actuated with Optional Proportional Control
INDUSTRIL FLUID OWER COMONENTS ND SYSTEMS HV SERIES Manual/ roportional Directional Valves HV39 HV9 HV8 EHV39 Lever ctuated with Optional roportional Control 334 Friendship Drive, Magnolia, TX 77355 Tel.:
Available manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
Hydro M t HYDRAULIC VALVES SN-4.
Hydro HYDRAULI VALVES A SRONG OMMIMEN O QUALIY Our concept is to sell and deliver the best quality of hydraulic valves, that fully meet our customer s rigorous requirements! o this end, our quality control
SDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE Directional control valves with direct acting solenoid SDE-SDE General informations Simple, compact and heavy duty designed sectional valves from to sections. SDE luminium alloy inlet sections,
ORV-M45. Contents. Additional Informations
Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners
Monoblock Directional Control Valve HDM11S/3PQ
Monoblock Directional Control Valve djustable priority flow to the first section (for agricultural applications) Reference: 200--991229-EN-00 Issue: 09.2015 1/24 Contents age 1 General information... 3
DFE10. solenoid control monoblock valve. Ordering codes. Description example : Diverter valve DFE10/3 A 18 ES - W VDC - SAE - <CVN>
DFE1 Ordering codes Description example : Diverter valve DFE1/3 18 ES - W 22-12VDC - SE - 1. 4. 5. 3. 5. 2. Valve is supplied painted as standard, with one coat of rimer black antirust paint II 5.
TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed center hydraulic systems.. H Fitted with
SDS180 DLS180. Sectional directional control valve
SDS8 DLS8 Sectional directional control valve SDS8/DLS8 Features Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. Fitted with a main
Electric Proportional Pressure Reducing Valves Series ERP 03.ERP
Electric roportional ressure Reducing Valves Series ER 03.ER - 0912 Electric proportional pressure reducing valves SERIES ER Index of content: Description and main features: age 3 echnical data: age 4
DFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes...
DFE Content Working conditions... 54 Hydraulic circuit... 55 DFE52 DFE1 DFE2 Dimensional data... 6 Ordering codes... 64 Positioner kits... 67 Solenoid parts... 68 Dimensional data... 69 Ordering codes...
Line mounting From SAE08 to SAE16 cavities. 15 l/min (3.9 US gpm) from -20 C (-4 F) to 80 C (176 F) from -20 C (-4 F) to 100 C (212 F)
PU.. type flow control pressure compensated valves - ways Line mounting From SE to SE cavities Technical specifications and diagrams are measured with mineral oil of cst viscosity at C ( F) temperature.
TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with
LUDV control block of sandwich plate design
LUDV control block of sandwich plate design RE 64125/02.11 Replaces: 01.10 1/22 ype SX 14, SX 14 S Nominal size 14 Series 2X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar
NV452 Monoblock directional control valve
NV452 Monoblock directional control valve Product Features General Specifications Order Coding Open Center Load Sense Performance Data Inlet Options Spool Positioners Spool Options Auxilary Valves Lever
Open center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
Pilot operated pressure relief valve
0/06 ilot operated pressure relief valve.6 ype ZD/ ZD 6V..L4X Size 6 up to 5bar up to 60 L/min Contents Function and configuration 0 Symbols 0 Specification 0 echnical data 0 Characteristic curves 0 Unit
Umschaltventile Magnet
Umschaltventile Magnet DFE 52/2 und DFE52/3 estellnr. Typ 25-1-1 DFE52/318ES-W1-12VDC 25-1-11 DFE52/318ES-W1-24VDC -1465 DFE52/318ES-Y1-12VDC -147 DFE52/318ES-Y1-24VDC Weitere Umschaltventil Varianten
Direct Operated Proportional DC Valves
echnical Information Direct Operated roportional DC Valves Series D1F and D3F General Series D1F and D3F directional control valves of nominal sizes NG6 (CEO 3) and NG10 (CEO 5) respectively, provide variable
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- -
EMechanically Operated Directional Valves
E DIRECIONL CONROLS Cam Operated Directional Valves hese valves may be used to shift the direction of oil flow by depressing the spool by way of a cam. Specifications Max. Operating Max. -Line Max. Flow
4/3-4/2 Directional valve elements B8_0A with or without (EDB-A) secondary relief valves, with or without LS connections B8_0A (EDB-A)
4/3-4/2 Directional valve elements B8_A with or without (EDB-A) secondary relief valves, with or without LS connections B8_A (EDB-A) RE 183-56 Edition: 11.218 Replaces: 7.12 Size 4 Series Maximum operating
MONOBLOCK DIRECTIONAL CONTROL VALVES
MONOBLOCK DIRECTIONAL CONTROL VALVES CONTENTS: RM0...... RM5...... RM40P...... RM80...... RMD90...... MRP70... Page 1/19&/19 /19...5/19 6/19...10/19 11/19...15/19 16/19&17/19 18/19&19/19 MONOBLOCK DIRECTIONAL
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve
4/2 Directional valve elements with or without secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve RE 183-54/7.12 Replaces: 1.9 1/8 8_58 (EDZ-VEI) Size 4 Series
Contents. Directional Control Valve 3 Series CV 452. Page 3-4. General Information. Page 5. Technical data. Page 6. Performance Curves.
Contents Page 3-4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 General Information Technical data Performance Curves Dimensions - Basics Valve Dimensions - LS Valve Secondary
TESTO ITC KORINNA 28mm Allargato SECTIONAL DIRECTIONAL CONTROL VALVES
ESO IC KORINN 8mm llargato SECIONL DIRECIONL CONROL VLVES SD6 - DLS7 SD6 Simple, compact and heavy duty designed sectional valve from to sections for open and closed center hydraulic systems. H Fitted
CONTROL VALVES
- 1 CONROL VALVES Introduction to the company HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ)
4/3 and 4/2 on-off directional valve elements D8_5 with or (EDD-XZ) without secondary relief valves and with or without LS connections D8_5 (EDD-XZ) RE 18301-12 Edition: 02.2016 Replaces: 07.12 07.2012
TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE rchivierung: 4/6 SD5 Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic
TESTO ITC KORINNA 28mm Allargato MONOBLOCK DIRECTIONAL CONTROL VALVE
ESO IC KORINN 8mm llargato MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 7 sections for open and closed centre hydraulic systems.. H Fitted with
CONTROL VALVES
- 1 CONROL VALVES resentación de la compañía HISORY Over fi fty years experience in fl uid power. Supplier to international manufactures of agricultural, construction, mining, mechanical handling, machine-tool
SECTIONAL DIRECTIONAL CONTROL VALVES
SECIONL DIRECIONL CONROL VLVES SDS Simple, compact and heavy duty designed sectional valve from to sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve and
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM--B -
MONOBLOCK DIRECTIONAL CONTROL VALVE
MONOLOCK DIRECIONL CONROL VLVE Features Simple, compact and heavy duty designed monoblock valves from to 6 sections for open and closed centre hydraulic systems. H Fitted with a main pressure relief valve
B8_58 (EDBZ-VEI) RE Edition: Replaces:
4/3 Directional valve elements 8_58 with or without EDZ-VEI) secondary relief valves, with or without LS connections, and with 2/2 solenoid cartridge valve 8_58 EDZ-VEI) RE 183-54 Edition: 2.216 Replaces:
Hydraulic Remote Control with STC Port Option Technical Focus
2 2 3 4 2 Hydraulic Remote Control with SC ort Option echnical Focus HRC HRC2-2 HRC2-R HRC2-S HRC4-J able of Contents General Description...4 SC erformance Characteristics...5 How to Use...6 Operating
SDE030 SDE060. Directional control valves with direct acting solenoid
SDE SDE6 Directional control valves with direct acting solenoid SDE-SDE6 Features Simle, comact and heavy duty designed sectional valve from to sections. Different tye of inlet covers. Different tyes of
Part Number Spool Qty Max Flow Max Pressure Ports. 80 lpm
Monoblock Valves M5 Monoblock, 80 lpm, Max 315 ar art Number Spool Qty Max Flow Max ressure orts M5/1S3/18L/G4-6 ylinder 1 M5/2S3/18L/G4-6 ylinder 2 M5/3S3/18L/G4-6 ylinder 3 M5/4S3/18L/G4-6 ylinder 4
Directional Control Valves
Overview HYDAC offers several functions of the Directional Control Cartridges. HYDAC Manually operated position, - way normally closed, spring return, directional valve features poppet design. It offers
Hydraulic gear pumps and motors
PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
Pressure Relief Valve
ressure Relief Valve For mounting on hydraulic pumps and motors Series ASDF and AGDF S short response times S trouble-free operation S with improved pressure-adjustment resolution S high levels of functionality
Contents. Directional Control Valve 2 Series EPCV 452. Page 3. General Information. Page 4-5. Technical data. Page 6. Performance Curves.
Contents Page 3 Page 4-5 Page 6 Page 7 Page 8 Page 9 General Information Technical data Performance Curves Dimensions : Hydraulic Valve and Accumulator Hydraulic Schematics Order Code Directional Control
油力油壓工業股份有限公司 YOULI HYDRAULIC INDUSTRIAL CO.,LTD. ISO 9001:2008 QA100189
ISO 9001:2008 Q100189 油力油壓工業股份有限公司 YOULI HYDRULIC INDUSRIL CO.,LD. V-4 Contents roportional Valve ump side module.5 End plate.6 asic module.7 general dimensions.8 ump side module options.10 System with
3/2 and 4/2 directional poppet valve with solenoid actuation
Courtesy of CM/Flodyne/Hydradyne Motion Control Hydraulic neumatic Electrical Mechanical (800) 426-5480 www.cmafh.com 3/2 and 4/2 directional poppet valve with solenoid actuation ype M-.SED Size 10 Component
RA / Accumulator unloading valve, pilot operated, Model DA 6 V.., series 4X. Ordering details DA 6 V 4X. Preferred models 1/8.
R 26 404/06.9 ccumulator unloading valve, pilot operated, Model D 6 V.., series 4X Size 6 up to 4500 SI (315 bar) up to.00 GM (30 L/min) R 26 404/04.9 Features: For subplate mounting: porting pattern to
Pressure Control Valves
Control Valves DR8- Reducing/Relieving, Direct Acting, Spool Type 4 gpm (5 l/min) 6 psi (4 bar) Description A screw-in cartridge, direct acting, spool type, pressure reducing/relieving valve with internal
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections
4/3-4/2 Directional valve elements with or without secondary relief valves, and with or without LS connections RE 18301-12/07.12 1/10 D8_5 (EDD-XZ) Size 8 Series 00 Maximum pressure (pump side) 310 [4500
Accumulator shut-off block. Type 0532VAW. Contents. Features. RE Edition: Replaces: 07.10
ccumulator shut-off block ype 0532VW RE 5012 Edition: 2016-06 Replaces: 07.10 Nominal diameter DN20, DN32 Component series 1 Maximum operating pressure 330 bar [400 psi] H7559 Features Ready for connection
Rexroth Hydraulics. Pressure reducing valve, pilot operated, type 3DR 3DR 10 P 6X Y 00 RE /10.97
RE 26 915/10.97 Replaces: 01.97 Pressure reducing valve, pilot operated, type 3DR Nominal size 10 Series 6X Maximum operating pressure 315 bar Maximum flow 120 L/min Contents H/A/D 5845/97 ype 3DR 10 P5-6X/315Y/00M
Monobloc and Sectional Directional Control Valves
Monobloc and Sectional Directional Control Valves motion and progress 1/220 10 Sectional directional control valves HDS20 Contents 10.1 General specifications 177 10.2 Dimensional data 178 10.3 erformances
DIRECTIONAL CONTROLS. Pilot Operated Directional Valves. Specifications
ilot Operated Directional s DIRECIONL CONROLS hese valves perform a change over of spool by hydraulic pilot and shift the direction of oil flow. EIC-E-04-0 Specifications Model Numbers Maximum Flow L/min.
YOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
D3M Sectional valve technical catalogue 1st edition D3M.05
D3M Sectional valve ECHNICAL catalogue 1 st edition D3M.5 his catalogue shows the product in the most standard configurations. lease contact our Sales Dpt. for more detailed information or special requests.
Walvoil 2/2, 3/2, 6/2, 8/3 Wegeventile, elektromagnetisch Gruppe mehr als Qualität
2/2, 3/2, 6/2, 8/3 Wegeventile, elektromagnetisch mehr als Qualität DFE Contents Working conditions 48 Hydraulic circuit 49 DFE52 DFE1 DFE2 Dimensional data 53 Ordering codes 56 Positioner kits 59 Solenoid
DIRECT ACTING PRESSURE RELIEF VALVE Model : DPR
A olyhydron Group Company Description DIREC ACING RESSURE RELIEF VALVE Model : DR of 6 Ref. No. Release 05 / 24 Direct acting valve. Guided poppet design. Cushion arrangement for greater stability and
HYDRAULIC MOTOR-BRAKE B/MR
HYDRAULI APPLIAION onveyors Feeding mechanism of robots and manipulators Metal working machines extile machines Agriculture machines Food industries Mining machinery etc. ONENS Specification data... 22
3/2 ways/positions flow diverters L (VS91-VS92-VS95)
3/2 ways/positions flow diverters L706... (VS91-VS92-VS95) RE 18302-03 Edition: 04.2016 Replaces: 02.2016 Size 12 Series 00 Maximum operating pressure 310 bar (4500 psi) Maximum flow 140 l/min (36.98 gpm)
250 bar P max. Technical Features. Functional Description
Hydraulic ini ower ack S 5 Example: plastic tank version Q max 17 l/min p max 25 bar max 3 kw echnical Features C and DC electro-hydraulic unit, easy-to-assemble, compact odularity offers many combinations
Single-circuit power brake valve LT 05
Single-circuit power brake valve L 05 RE 66 Edition: 09.0 Replaces: 08.00 Series X Service brake pressure 0, 60, 80, 00 and 5 bar HD 679 Features Small installation dimensions Integrated maximum pressure
Priority valve Type LPS
RE 27 548/10.98 riority valve Type LS Nominal sizes 40 to 160 Series 1X Nominal pressure 250 bar Maximum flow 160 L/min. H/AD/5977/98 riority valve type LS... Contents Description age Features 1 Ordering
D07 & D08. Series 35 Solenoid Valves D07 D Friendship Drive, Magnolia, TX Tel.: Fax:
GENERL FEURES SNDRD FEURES High ressure/ High Flow: 65 gpm/ psi ilot Operation: Main spool controlled by D0 solenoid pilot valve- allows for addition of modular valves to reduce shifting shock. Oil Immersed,
YOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 463 87 7 4468 45 9 OFFIE & FORY : No.9, LNE 45, I MING RD., WU ZIH DIS., IHUNG IY, IWN 4468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail :
APV Load Sensing Valve
www.k-fluidpower.com V Load Sensing Valve V0: V6: V 22: V 32: Max. flow: port 60 l/min 260 l/min 660 l/min 2000 l/min port / 80 l/min 50 l/min 380 l/min 800 l/min Max. pressure: port // 350 bar 420 bar
Meter-in pressure compensator, direct operated
Meter-in pressure compensator, direct operated RE 94/.07 Replaces: 0.0 / ype ZDC Sizes 0 to Component series Maximum operating pressure bar Maximum flow l/min tb07 able of contents Content age Features
Eaton. Revised April, Directional Control Valves. Model 30540, 15 GPM Directional Control Valves. We Manufacture. Solutions
s Eaton Revised April, 1996 c Directional Control Valves h i y d l ydraulics r a u u l c a i d r s Model 354, 15 GPM Directional Control Valves Solutions y We Manufacture H S o l u t i o n s Model 354
6/2 ways/positions flow diverters L (VS120-VS125-VS129)
6/2 ways/positions flow diverters L710... VS120-VS125-VS129) RE 18302-04 Edition: 05.2014 Replaces: 07.12 Size 4 Series 00 Maximum operating pressure 310 bar 4500 psi) Maximum flow 25 l/min 6.6 gpm) Ports
45 lpm. Part Number Spool Qty Max Flow Max Pressure Ports. 45 lpm. Relief Valve Standard Bar Range Power Beyong Plug included in every kit
Monoblock Valves M3 Monoblock art Number Spool Qty Max Flow Max ressure orts M3/S3/8L/G4-3-4 ylinder M3/2S3/8L/G4-3-4 ylinder 2 M3/3S3/8L/G4-3-4 ylinder 3 M3/4S3/8L/G4-3-4 ylinder 4 45 lpm 35 ar (25 ar
6/2 ways/positions flow diverters
6/2 ways/positions flow diverters RE 18302-07/07.12 Replaces: 12.09 1/8 L753... (VS311-VS312-VS315) Size 10 Series 00 Maximum operating pressure 310 bar [4500 psi] Maximum flow 140 l/min [36,98 gpm] Ports
Directional Controls
VICKERS Directional Controls Solenoid Operated Directional Control Valves NF D05, ISO-4401-05 DG4S*-01**-5* ir Gap ype Revised 8/97 671 able of Contents DG4S*-01 Model Code..................................................................................
TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System CONTENTS General Information... Order Code... Manual Control
DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C
DENISON HYDRAULICS High Flow Seat Valve Cartridges CEHFE, C1C 2/2-Way Function / Cavity conform to ISO 7368 (DIN 24342) Publ. 7 EN 5060 A FEATURES, DESCRIPTION FEATURES x High flow cartridges give highest
Throttle check valve. Type Z2FS. Size 16 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm]
![Throttle check valve. Type Z2FS. Size 16 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm]](/thumbs/82/86214948.jpg "Throttle check valve. Type Z2FS. Size 16 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm]")
hrottle check valve ype Z2FS Size 6 Component series 3X Maximum operating pressure 350 bar [5076 psi] Maximum flow 250 l/min [66 US gpm] tb022 able of contents Content Page Features Ordering code 2 Symbols
6 to14/2 ways/positions bankable flow diverters flangeable
6 to14/2 ways/positions bankable flow diverters flangeable RE 18302-10/07.12 Replaces: 12.09 1/8 L745... (VS281F-VS285F-VS286F-VS287F-VS289F) Size 10 Series 00 Maximum operating pressure 310 bar [4500
6/2 ways/positions flow diverters L (VS151-VS152-VS155)
6/2 ways/positions flow diverters L721... (VS151-VS152-VS155) RE 1832-5 Edition: 2.216 Replaces: 5.214 Size 6 Series 1 Maximum operating pressure 31 bar (45 psi) Maximum flow 6 l/min (15.85 gpm) Ports
Hydraulic motor type MM. Hydraulic motor type MR SPOOL VALVE HYDRAULIC MOTORS. Quality assured company - ISO 9001 Certified
SOOL VALVE HYDAULI MOOS Quality assured company - ISO 9001 ertified SOOL VALVE - he distributor valve has been integrated with the output shaft. he valve has hydrodynamic bearings, and has infinite life
These valves may be used to manually shift the spool position and change the direction of oil flow *2 1.8
DIRCINL CNRLS Manually perated Directional s hese valves may be used to manually shift the spool position and change the direction of oil flow. IC--1005-0 Specifications Numbers DMG-01-C -10 DMG-01-D -10
6/2 WAY DIRECTIONAL VALVE KV (NG 6)
6/2 WAY DIRECTIONAL VALVE KV (NG 6) NG 6 Up to 350 bar [5 076 PSI] Up to 50 L/min [13.2 GPM] Plug-in connector for solenoids to ISO 4400. Threaded connections to ISO 9974 (Metric), ISO 1179 (BSPP/Gas),
Fixed Displacement Plug-In Motor A2FE
Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Plug-In Motor 2FE RE 9008/03.97 replaces 04.96
EXPLOSION PROOF CHECK VALVE TYPE SEW6 SERIE 3X ATEX DIRECTIVE & CENELEC STANDARD
EXLOSION ROOF CHECK VALVE YE SEW SERIE X AEX DIRECIVE & CENELEC SANDARD NO/E 0-0/-0 CARACERISICS Hydraulic : Cetop. Maximum service pressure : 50 Bar. Nominal flow max. : l/mn. hydraulic symbols : / et
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:
SECIFICIONS D05H attern Directional Control Valves lso refer to "Directional Valve Features, Selection and Operating Recommendations" (dynexdcvoperating.pdf) CONC INFORMION US Headquarters 770 Capitol
Pressure Relief Valve DB12 CE
Pressure Relief Valve DB12 CE up to 120 l/min Connection housings 1. DESCRIPTION 1.1. GENERAL According to DIN-ISO 1219, HYDAC pressure relief valves DB12-CE are valves for oil hydraulic systems to control
BW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
1.5DRE. Aluminium gear flow dividers. Technical Catalogue E IM00
1.5DRE Aluminium gear flow dividers Technical Catalogue E0.109.0416.02.00-IM00 GEAR FLOW DIVIDERS E SERIES General Features GEAR DIVIDERS A flow divider is composed by two or more modular elements (stages)
Section 6 Pump Manifolds
Industrial Hydraulics Electric Drives and Controls inear Motion and Assembly Technologies neumatics Service Automation Mobile Hydraulics Section 6 ump Manifolds RA 09 907/07.04 The Drive & Control Company
YOULI HYDRAULIC INDUSTRIAL CO.,LTD.
YOULI HYDRULI INDUSRIL O.,LD. 41163 87 7 41468 145 9 OFFIE & FORY : No.9, LNE 145, I MING RD., WU ZIH DIS., IHUNG IY, IWN 41468 EL : 886-4-2335 8996 FX : 886-4-2335 8997 Http://www.tw-youli.com.tw/ E-mail
Umschaltventile DF20/3. mit Hebel Bestellnr. Typ Code
Umschaltventile DF/3 Bestellnr. Typ Code mit Hebel 4-- DF/3AL 64 4-- DF/3A7L 6744 4-- DF/3A7SLP 64 4-- DF/3AT7SLP 64 4-- DF/3BC7CB 674 4-- DF/3AC7CA-TAP(A) 64 4--3 DF/3B7MEIA-TAP(B) 648 4--4 DF/3AMB 6
Type : V20 Nominal Flow : 80 LPM Maximum Flow : 135 LPM (36 GPM) Max. Pressure : 350 Bar (5000 psi) Medium : Mineral Oil
ype : V20 Nominal Flow : 80 LM Maximum Flow : 135 LM (36 GM) Max. ressure : 350 ar (5000 psi) Medium : Mineral Oil Introduction: VELJN V20M Mobile directional control valve is a segment type design that
Monoblock Directional Control Valve PMB22TSTSAB PMB23TSTSTSLB PMB21TDLB
Engineering & Manufacturing Solutions Specifications: FLOW RATINGS: - MB21 & MB22 10 gpm (38 lpm) - MB23 8 gpm (30 lpm) Rated up to 4000 psi (275 bar). Port Sizes: - Inlet/Outlet #8 SAE. -Work Ports #8
TPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
DIRECTIONAL VES. Components For The Control Of A Wide Range Of Operating Flows And Pressures
HYD RULI DIREIONL O NROL VLVES VES omponents For he ontrol Of Wide Range Of Operating Flows nd ressures V, DV, ND RORY DIREIONL ONROL VLVES; FOR FLOWS U O 20 GM (76 LM) ND WORKING RESSURES U O 2,500 SIG
Auxiliary valves. Lever. Spool positioner Check valve Spool
Auxiliary valves Lever Spool positioner Check valve Spool CONTENTS: Page -Technical data... 1 -Dimensions RP80... 2 -Dimensions RP60... 3 -Lever mechanism... 4 -Spools/spool control... 5 -Inlet cover/outlet
CONTINENTAL HYDRAULICS VAD05M-VMD05M - AIR & LEVER OPERATED DIRECTIONAL VALVES
CONTINENTAL HYDRAULICS VAD05M-VMD05M AIR & LEVER OPERTAED DIRECTIONAL VALVES 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM VAD05M-VMD05M AIR & LEVER OPERATED