CONEXTRU GMBH LIST OF PRODUCT DEVELOPMENTS. Page 1 of 5
|
|
- Alicia Ward
- 5 years ago
- Views:
Transcription
1 Page 1 of 5 LIST OF PRODUCT DEVELOPMENTS BY CONEXTRU GMBH MARCH 2009 TO SEPTEMBER 2013
2 Page 2 of PO PIPE HEADS mono- multi- cross- heads Helical spiral distributor heads Monolayer spiral head up to 110 mm for PEX a Monolayer spiral head up to 63 PE Monolayer spiral head up to 160 mm for 500 kg/h Monolayer spiral head up to 250 mm for 800 kg/h with pipe inner cooling Monolayer spiral head up to 630 mm for 1200 kg/h with pipe inner cooling Monolayer spiral head up to 800 mm for 1200 kg/h with pipe inner cooling Monolayer spiral head up to 1200 mm for 1500 kg/h with pipe inner cooling Monolayer spiral head up to 1600 mm for 2000 kg/h with pipe inner cooling with 2 extruders Monolayer spiral head up to 2600 mm for 3000 kg/h with pipe inner cooling with 2 extruders Two layer spiral die up to 450 mm for PE Two layer spiral die up to 160 mm for PE Two layer spiral die up to 630 mm for PE Three layer die up to 125 mm for 450 kg/h for PP-R / PP-R GF / PP-R Three layer die up to 160 mm for 700 kg/h for PP-H with pipe inner cooling without pipe inner cooling Three layer die up to 250 mm for PP-R / PP-R GF / PP-R 2 different extruder position versions Three layer die up to 250 mm for 1200 kg/h PE with pipe inner cooling Three layer die up to 800 mm with pipe inner cooling Three layer die up to 1200 mm for over 1500 kg/h with pipe inner cooling Modification of Existing heads PO coex converted to 3 layer head for PP IPO coex converted to 5 layer head for PA Radial spiral distributor heads Monolayer radial die with rotation mandrel for cable duct up to 63 Coextrusion units for thin outer layer to helical spiral heads For head up to 160 mm For head up to 400 mm For head up to 630 mm For 2 layer head to end up with 3layer structure For 3 layer head up to 250 to end up with 5 layer structure
3 Page 3 of 5 Radial spiral distributor heads Three layer die up to 40 mm Three layer die up to 75 mm for PPR / PPR-GF / PPR Three layer die up to 110 mm with EVOH Five layer die up to 40 mm with EVOH Special combination with Outer helical spiral and inner radial spiral distributor Five layer die up to 400 mm for pre insolated pipes with EVOH as middle layer Three layer die up to 160 mm for Fuel transportation pipe as a cross head Cross head for pipe coating Single layer / multilayer Cross head up to 160 mm 2 layer Cross head up to 160 mm 1 layer for cable coating Cross head up to 400mm - steel pipe coating Cross head up to 160mm - steel pipe coating Cross head up to 160 mm for wire insertation Multi strand extrusion Double head for geothermic pipes up to 63 mm Quattro head for geothermic pipes up to 63 mm PO Calibrators High speed calibrators for PP-R and Irrigation pipes for 16 / 20 / 25 up to 30 m/min Standard PE / PP Calibrator from 20 to 1600 mm 2.0 PVC PIPE HEADS coextrusion tools PVC pipe head PH 2 upgrade PH 3 upgrade PVC calibrators Two layer tool Modification of an existing head up to 160 mm to improve throuput for 900 kg/h, Redesign of existing designs for O-PVC feedstock pipes up to 500 mm or other heavy wall 2 layer PVC pipes designed for high throuput up to 1200 kg/h
4 Page 4 of SINGLE SCREW EXTRUDERS Feed bush executions Straight feed bush 45, 60, 75, 90, 120, 150 Spiral feed bush for 40D 45, 60, 75 & 90 New Extruders & screws 45 mm Extruder L/D 30 for 200 kg/h 45 mm Extruder L/D 36 for 270 kg/h 45 mm Extruder L/D 37 for 300 kg/h for Irrigation pipes 45 mm Extruder L/D 37 for 350 kg/h 45 mm Extruder L/D 37 for 400 kg/h Gearless 45 mm Extruder L/D 40 for 500 kg/h 60 mm Extruder L/D 25 for PVC 60 mm Extruder L/D 25 for PPS high temperature execution 60 mm Extruder L/D 36 for 500 kg/h 60 mm Extruder L/D 37 for 600 kg/h Gearless 60 mm Extruder L/D 37 for 400 kg/h Irrigation pipes 75 mm Extruder L/D 36 for 650 kg/h 75 mm Extruder L/D 37 for 900 kg/h Gearless 75 mm Extruder L/D 40 for 1500 kg/h high speed concept only 80 mm Extruder L/D 35 for 450 kg/h 90 mm Extruder L/D 36 for 650 kg/h 90 mm Extruder L/D 37 for 1000 kg/h 90 mm Extruder L/D 37 for 1200 kg/h 90 mm Extruder L/D 40 for 1700 kg/h will be shown on K show mm extruder L/D 36 for 3700 pph US Version 1700 kg/h PP-Screws for PP sewer pipes for high and low modulus PP type 45 mm 37 L/D 60 mm 37 L/D 75 mm 37 L/D 4.0 CONICAL TWIN SCREW EXTRUDERS Modification of a conical 65 twin screw extruder for PE-Xa processing for 100 kg/h. Special screw design adopted for PE- Xa.
5 Page 5 of CALIBRATORS FOR PP & PE & WATER TANKS Full range of PE & PP Calibrators also in high speed version Calibration tanks and cooling for high speed PP & PE irrigation pipes and high speed PP-R extrusion Vacuum tank for double Extrusion Vacuum tank for quarto Extrusion 6.0 PROCESS & OPTIMISATION Real benefits of pipe inside cooling and new cooling length calculation Cooling length calculation for PP-R and PP-R filled Process optimization and extruder modification (pipe head, screw) for C-PVC pipe production Process optimization at extrusion line supplier for PE-Xa pipe production cross linked with infrared for pipe sizes mm with EVOH coating. Process optimization at pipe producer for 5 layer PP & PE-RT pipes Case study and benefit study for a PP sewer pipe extrusion line with direct compounding 1200 mm PVC pipe production optimization in Egypt Pipe design and benefit evaluation for 3 layer foamed PP pipes for Norway 7.0 OTHER PROJECTS Study about antibacterial agents for plastic pipes Claim study for Swiss gear pump supplier Participation on a development project for in line belling and electro fusion system Pipe inspection for TÜV - Austria in Lybia 8.0 EDUCATION Since the year 2000 university lecturer of Extrusion technology for Master study (MSc) in plastics technology at Fachhochschule Nordwestschweiz Trainer for PE pipe extrusion at Tasnee petrochemical plant in Saudi Arabia in 2013 Last up date October 2013
LSS90/ Three-layer Coextrusion Sheet Production Line
WWW.LIANSU.COM WWW.LS-EXTRUSION.COM LSS90/50-1200 Three-layer Coextrusion Sheet Production Line Process material: PS PP Max sheet width: 900mmadjustable (layer A -10%, layer B - 80%, layer A - 10%) Sheet
More informationm e c h a t r o n i c c o m p a n y p r o t e c t i o n air & fluid s y s t e m s GB We protect technology.
c o m p a n y p r o t e c t i o n c o n n e c t i o n a i r & f l u i d m e c h a t r o n i c air & fluid s y s t e m s GB company protection connection air & fluid mechatronic Our Competences protection
More informationENGINEERING+MANUFACTURING. DUNST extruders for the cable production
DUNST extruders for the cable production The DUNST extruders for all applications An ever broadening spectrum of thermoplastics and applications calls for versatile processing machinery solutions. The
More informationTesting and Measuring Extruders The high performance machine for plasticizing of polymers and elastomers
Laboratory machines for the processing of polymers Testing and Measuring Extruders The high performance machine for plasticizing of polymers and elastomers From polymer to information Testing Extruder
More informationCoextrusion system for the production of 3 layer blown film FLEXIBILE MODULAR EFFICIENT
Coextrusion system for the production of 3 layer blown film FLEXIBILE MODULAR EFFICIENT Film coextrusion is becoming more and more widespread in the packaging industry and is quickly replacing monolayer
More informationPE-HDXc pipes (physically cross-linked polyethylene pipes)
pipes (physically cross-linked polyethylene pipes) Applications: Domestic drinking water installations, radiator connections and surface regulation Special properties high chemical resistance (according
More informationQuickSwitch Technology for in-line dimension change
Engineering Value Page 1 Competence Forum 2018 Page 2 An in-line dimension change system The revolution in PO pipe extrusion. Ideal imagination of an extrusion line 100 % machine utilization / availability
More informationSJSZ 80/173 Foam Board Extrusion Line
Date: Jan. 27, 2018 SJSZ 80/173 Foam Board Extrusion Line 1. Equipment List&Price Item Description Unit Price Qty (USD) (Set) 1 SJSZ 80/173 Double Screw Extruder 1 Total Price (USD) 2 Mould - - - 3 Mould
More informationtechbex The All-in-One solution for technical profiles
techbex The All-in-One solution for technical profiles Extrusion of technical profiles The techbex line concept is ideally suited for the extrusion of single-walled technical profiles and hollow profiles
More informationRANDCASTLE S CAST FILM/COATING LINES
RANDCASTLE S CAST FILM/COATING LINES Model RCP-1000, 1 Inch Extruder With 12 Inch Flex Lip Die For Cast Film, Coating And Lamination Patents: 5,486,328; 5,518,672, 5,569,429 Other U.S. And Foreign Patents
More informationyour partner in leading technology tecnocanto Extrusion Extrusão Recycling Reciclagem Packaging Embalagem
your partner in leading technology Extrusion Extrusão Recycling Reciclagem Packaging Embalagem Heating elements TC.C1-REV Ø, lda @.pt www..pt lines Pipes / Profiles 3D printer filaments, lda @.pt www..pt
More informationTHOMAS. Low Pressure SS Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Low Pressure SS Couplings Couplings for Structured Wall HDPE Pipe & Low Pressure Applications G1 COUPLINGS & FLANGE ADAPTORS - NON
More informationScientific COMBI 26 mm Twin Screw
Scientific COMBI 26 mm Twin Screw Extruder type LTECC26-40 with Co and Counter-rotating twin screws for compounding of PVC and most other thermoplastic resins 26 mm COMBI twin screw with 15 KW drive and
More informationLabtech Engineering Co., Ltd.
New μcompounder Modular 12 mm twin-screw extruders types LTE 12-36 with segmented screws and screw speeds up to 800 RPM Available both in manual as well as fully computerized version with LCD touch screen
More informationEmission Data of Automotive Fuel Systems. EVAP LDV Meeting 8th February 2012, Brussels
Emission Data of Automotive Fuel Systems EVAP LDV Meeting 8th February 2012, Brussels About PlasFuelSys PlasFuelSys is the representative organization of plastic fuel systems providers for the automotive
More informationExtrusion downstream equipment for large-diameter pipes
Extrusion downstream equipment for large-diameter pipes Large-diameter pipe extrusion The extrusion of large-diameter pipes is extremely exacting. A smooth production process can only be achieved through
More informationNo or low cost Extrusion Coating Improvements
No or low cost Extrusion Coating Improvements Tappi India Conference Senior Sales Engineer Davis-Standard, LLC Challenges in Extrusion Coating Flexible Laminations Single or Multiple Extruder Carriage
More informationMEDIUM VOLTAGE
WWW.GENERGYCABLE.COM 800-308-1330 TM MEDIUM VOLTAGE MEDIUM VOLTAGE ASSEMBLIES Type SH Medium Voltage Power Cable Assemblies are designed for heavy-duty MV applications that require temporary or permanent
More informationCONEX Works, Santry Avenue, Dublin 9, Ireland Tel: (0) Fax: (0)
CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: 00 353 (0)1 842 6255 Fax: 00 353 (0)1 842 6134 Email: sales@sanbra.ie MULTILAYER PIPING SYSTEMS I.S. EN ISO 21003-1:2008 NSAI Certified PRODUCT OVERVIEW
More informationPRODUCT CATALOGUE 2011
INNOVATIVE PIPESYSTEMS- SUCCESSFULL WORLDWIDE Fusiotherm climatherm aquatherm lilac aquatherm ISO aquatherm aquatherm SHT climasystem PRODUCT CATALOGUE 2011 Fusiotherm climatherm aquatherm lilac aquatherm
More informationLOGSTOR FlexPipe System
VERSION 2018.10a PexFlextra LOGSTOR FlexPipe System Handbook - design, products and installation AluFlextra CuFlex Biomass plant Residential area School premises SteelFlex Agricultural buildings defining
More informationLESSON PLAN. Name of Faculty: Rajiv Sharma. Discipline: Plastic Technology. Semester: V. Subject: PLASTIC PROCESSING TECHNIQUES-1I
Week LESSON PLAN Name of Faculty: Rajiv Sharma Discipline: Plastic Technology Semester: V Subject: PLASTIC PROCESSING TECHNIQUES-1I THEORY PRACTICAL 1 ST 2 ND 3 RD 4 TH Lecture TOPIC DAY Unit 1: Introduction
More informationThermal management You ll go longer further
Thermal management You ll go longer further VOSS Automotive Thermal management in electric vehicles: Customized solutions for tempering batteries For maximum performance and range of electric and hybrid
More informationMade simple. High Tech Extruders. The plastic welding solution. BAK Thermoplastic. Birkenweg +41 (0)
Made simple High Tech Extruders The plastic welding solution BAK Thermoplastic B/28-B, Welding GR. Technology Floor, AG Industrial E-Mail Estate, info@bak-ag.com LBS Birkenweg 3 (W), Mumbai - 400 Telefon
More informationPROTECT DRIVES YOU AUTOMOTIVE TRANSPORT PROTECTION.
AUTOMOTIVE PROTECT W H A T DRIVES YOU AUTOMOTIVE TRANSPORT PROTECTION www.nmc-nomafoam.com 1 2 INDEX PROCESSING NEW VEHICLE TRANSPORT PROTECTION 8 Bumper protection 10 Door protection 12 Door handle protection
More informationextruders - lines - profiles - pipes
extruders - lines - profiles - pipes Klaus Schoeffler (Mr.) 71272 Renningen / Germany Fon +49-7159-5860 cell +49-173-7211710 info@remax-extrusion.de www.remax-extrusion.eu VAT-Tax-No. DE 145972470 Brand
More informationToppTube PA11 (Polyamide) page 4. ToppTube PA12 (Polyamide) page 5. ToppTube PA12HIPHL (Polyamide) page 6. ToppTube PUR 98A (Polyurethane) page 7
ToppTube PA11 (Polyamide) page 4 ToppTube PA12 (Polyamide) page 5 ToppTube PA12HIPHL (Polyamide) page 6 ToppTube PUR 98A (Polyurethane) page 7 ToppTube PE-LD (Polyethylene) page 8 ToppTube PE-LLD (Polyethylene)
More informationCo-extrusion Blown Film Plants
GERMANY In technical collaboration with GmbH, Germany Partner in Progress Co-extrusion Blown Film Plants Manufactured un der licenc e from GmbH www.windsormachines.com ABOUT WINDSOR Windsor by virtue of
More informationGENERAL SPECIFICATION. NR2-46mm (Mod.5) Pelletizing Machine FREESIA MACROSS CORPORATION
GENERAL SPECIFICATION NR2-46mm (Mod.5) Pelletizing Machine FREESIA MACROSS CORPORATION Ver. 2013 CONTENTS 1 Component of machine 1-0. Specification 1-1. Barrel 1-2. Screw 1-3. Gear Box 1-4. Twin screw
More informationNSW Winding Wires. for Submersible Motors
NSW Winding Wires for Submersible Motors NSW WINDING WIRES Norddeutsche Seekabelwerke GmbH (NSW) is a leading manufacturer of communications, submarine, overhead, power and offshore cables as well as engineering
More informationCompactness meets High Power Density
Compactness meets High Power Density Single Stage Geared Motors for Industrial Applications www.abm-drives.com gearboxes Modern and Efficient Drive Technology Single Stage Geared Motors Advantages High
More informationDesign Stress = 8 Mpa
hdpe Pipes HdPE Pipes Muna Noor Manufacturing & Trading LLC is a pioneer in the manufacture of plastic pipe systems in Oman. Today s modern polyethylene resins are highly engineered for rigorous applications
More informationEnergy saving ventilation Air handling units (Catalogue no. 2) Industrial and commercial ventilation. (Catalogue no. 1)
Industrial and commercial ventilation (Catalogue no. 1) Industrial and commercial ventilation components - fans for round and rectangular ducts, sound-insulated, axial and roof fans, air handling units
More informationHigher Temperature PP-Based Composite Provides Nylon/PA- Level Performance at Lower Weight and Economic Feasibility
Higher Temperature PP-Based Composite Provides Nylon/PA- Level Performance at Lower Weight and Economic Feasibility Society of Plastic Engineers Automotive Composites Conference & Exhibition September
More informationCompostable Solutions for Packaging. FlexPackCon 2016 Randy Jester
Compostable Solutions for Packaging FlexPackCon 2016 Randy Jester 10/14/2016 1 Overview Film structural polymers ecovio aliphatic-aromatic polyester / PLA blend ecoflex aliphatic-aromatic polyester Packaging
More informationSpain s exports by oil product group and country of destination
Corporación de Reservas Estratégicas de Productos Petrolíferos Castellana, 79 28046 Madrid T. +34 91 360 09 10 Updated F. +34 91 420 on39 45 www.cores.es February 13 th 2017 Spain s exports by oil product
More informationTable of Contents 2.0 COOLFLEX CLX. 2.0 Table of Contents
Table of Contents CLX 2.0 2.0 Table of Contents 2.1 System description 2.100 System description (general) 2.105 System description (data) 2.115 range, DN 20 - DN 125 / SDR 11 (coils) 2.2 Planning, design
More informationTable of Contents. EIGERFLEX -Clima. 2.0 Table of Contents
2.0 Table of Contents 2.0 Table of Contents 2.1 System description 2.100 System description (general) 2.105 System description (data) 2.115 -Clima range, DN 20 - DN 125 / SDR 11 (coils) 2.120 -Clima range,
More informationPreview Edition: M370 ADVANCES 2014
Preview Edition: M370 ADVANCES 2014 TURNING SOLID END MILLING INDEXABLE MILLING TOOLING SYSTEMS METRIC High-Feed Applications M370 Series Designed for high feed rate productivity, M370 Series provides
More information2 way ball valve S4 with integrated Praher Labeling System
Praher Plastics Austria GmbH DB/EN/DEEN///33 Technische Änderungen vorbehalten! way ball valve S4 Symbol photo Safety locking handle system This document does not constitute a guarantee, it is for initial
More informationEXTRUSION, TECHNOLOGY AND INNOVATION
EXTRUSION, TECHNOLOGY AND INNOVATION Continuous Technology Development for the success of our customers In 1982 the company was established by Prof. Dr.-Ing. Thomas Reiner for development, production and
More informationTable of contents. Chapter 1: Fusiotherm. Chapter 4: climasystem Produktgruppe 20. Chapter 5: aquatherm. Chapter 2: aquatherm SHT.
Table of contents Chapter 1: Fusiotherm 01 Fusiotherm -pipe 04 climatherm-pipe & aquatherm-lilac 07 Accessories 09 Fittings 15 Weld-in saddle 19 Threaded connections and accessories 22 Transition pieces
More informationHoses for the Agricultural Industry. Hoses & Connection Systems for demanding applications in the Agricultural Industry
Hoses for the Agricultural Industry Hoses & Connection Systems for demanding applications in the Agricultural Industry Your specialist partner for any application in the Agricultural Industry As much variety
More informationGeneral Specification
General Specification OF NV-100mmSG (Mod.2) Single Screw Extruder Freesia Macross Corporation April 2009 1. Type General purpose single screw extruder 2. Capacity 300-500 kg/h (ABS pellet) 3. Dimension
More informationTechnical Information
European debut of new TEX34αIII - worldwide highest performance compact twin-screw extruder Following introduction of its new compact TEX34αIII high-performance compounding extruder at the October 2017
More informationCooling of plastic on metallic mandrel
Invention Journal of Research Technology in Engineering & Management (IJRTEM) ISSN: 2455-3689 www.ijrtem.com Volume 1 Issue 12-Version-4 ǁ December. 2017 ǁ PP 01-16 Cooling of plastic on metallic mandrel
More informationPART PROGRESSION LIST AND PART PRICE LIST S As of October 12, 2006
PART PROGRESSION LIST AND PART PRICE LIST S As of October 2, 2006 The following part progression list was taken from the various Ford Part Price List s which were available. One can follow Fords change
More informationFacts and figures ALLROUNDER 1500 T
Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22
More informationHigh quality covering of rolls, tubes, sleeves and rods Roll covering machinery, strip winding, Covermatic and crosshead systems
High quality covering of rolls, tubes, sleeves and rods Roll covering machinery, strip winding, Covermatic and crosshead systems Engineering Value 3 Roll covering machinery Constantly high product quality
More informationHot and Cold Plumbing Manifold Systems
Hot and Cold Plumbing Manifold Systems Hot and Cold Manifold Overview By using an Emmeti manifold system in a point to point plumbing configuration you can greatly reduce the number of joints in your system,
More informationSOURCE OF PRECISION.
SOURCE OF PRECISION. Minimal energy consumption, reduced scrap, lowest production costs during the entire life cycle the requirements for plastics processors are continuously rising. Due to increasingly
More informationExpanded Graphite SIGRAFLEX UNIVERSALPRO
SIGRAFLEX UNIVERSALPRO Impregnated TA Luft-Compliant Sealing Sheet Made from Natural Graphite with Tanged Stainless Steel Reinforcement Expanded Graphite Broad Base. Best Solutions. SIGRAFLEX UNIVERSALPRO
More informationTHE EFFECTS OF RUNNING DIFFERENT BARREL TEMPERATURE PROFILES FOR VARIOUS RESINS
THE EFFECTS OF RUNNING DIFFERENT BARREL TEMPERATURE PROFILES FOR VARIOUS RESINS Walter S. Smith Luke A. Miller Jason Willis Timothy W. Womer Xaloy Corporation, New Castle, PA Abstract Differences in solids
More informationALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800
ALLROUNDER 520 H Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 MACHINE DIMENSIONS 520 H 2002 1348 255 849 120 330 max. 385 438 507 800
More informationPlast/Joint. The mechanical connection with unique one bolt system for plastic pipes d63 d315
Plast/Joint The mechanical connection with unique one bolt system for plastic pipes d63 d315 Plast/Joint >> Quick and efficient installation due to one bolt system >> Do you encounter repairs at difficult
More informationPipeline Accessories. Hydraulic wedge mandrels Bending sets Line-up clamps Roli-cradles
Pipeline Accessories Hydraulic wedge mandrels Bending sets Line-up clamps Roli-cradles PIPELINE ACCESSORIES PERFECT COMPLEMENT TO YOUR BENDING MACHINE In addition to the full range of pipe bending machines,
More informationYOUR GLOBAL PARTNER FOR HIGH EFFICIENCY EXTRUDER DRIVES
YOUR GLOBAL PARTNER FOR HIGH EFFICIENCY EXTRUDER DRIVES GEARBOXES AND DRIVE PACKAGES FOR EXTRUSION, COMPOUNDING AND INJECTION MOLDING MACHINES Sponges, PVC pipes, colored granules, profi le of high performance
More informationTable of Contents COOLMANT. 2.0 Table of Contents
CLM 2.0 Table of Contents 2.0 Table of Contents 2.1 System description 2.100 System description (general) 2.105 System description (data) 2.115 COOLMANT range, Ø 125 - Ø 315 / SDR 11/SDR 17 (bars) 2.2
More informationIndustrial, Heavy Insulated Mono-Tape. and Duo-Tape
Industrial, Heavy Insulated Mono-Tape and Duo-Tape Description: HTS/Amptek AWD and AWM Heating Tapes are Single and Double Duo-Tapes designed for use in high temperature applications. AWD and AWM Heating
More informationALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800
ALLROUNDER 570 E Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 MACHINE DIMENSIONS 570 E 1900 850 150 330 520 1285 825 435 605 1000 280 5185
More informationALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400
ALLROUNDER 470 A Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP):, 290, 400 MACHINE DIMENSIONS 470 A 840 330 438 1302 2050 2124 1)2) 2139 3) 400 1109 max.
More informationEXTRU - the reliable extrusion gear pump
EXTRU - the reliable extrusion gear pump The EXTRU is mainly used in conjunction with extruders or kneaders. It reduces the natural pulsation and irregular conveyance, particularly in single-screw extruders,
More informationCONEX Works, Santry Avenue, Dublin 9, Ireland Tel: (0) Fax: (0)
CONEX Works, Santry Avenue, Dublin 9, Ireland Tel: 00 353 (0)1 842 6255 Fax: 00 353 (0)1 842 6134 Email: sales@sanbra.ie PRODUCT OVERVIEW NSAI Certified to EN ISO 21003 and WRAS approved. INSTANTOR Press
More informationEXPERTISE IN PLASTICS JERRYCANS
EXPERTISE IN PLASTICS JERRYCANS Contents Jerrycans Volume litres Neck Material Colour * Page opti-rib 2 / 2,5 / 3 DIN 45 HDPE natural colour 5 opti-rib 5 DIN 45 HDPE natural colour 6 opti-rib 5 DIN 50
More informationCONDUCTOR Plain bright annealed copper! alluminium, solid! stranded conductor confirming to IS: 8130: INSULATION INNER SHEATH
c A B L E 5 [B) Techno Flex manufacture high quality heavy duty power cable confirming to IS: 1554 (Part -1) L.T. 1100 volts grade CONSTRUCTION DETAILS:- Power Cable CONDUCTOR Plain bright annealed copper!
More informationAN ISO 9001 : 2008 COMPANY
R AN ISO 9001 : 2008 COMPANY Company Jigar dustries is one the largest manufactures " SIGMA" brand electric wires & cables in dia. The company has a experience manufacturing wires and cables for more than
More informationHEAT ON. Plastic welding extruder. BAK Thermoplastic Welding Technology AG. Industriestrasse Kerns / Switzerland
HEAT ON Plastic welding extruder BAK Thermoplastic Welding Technology AG E-Mail info@bak-ag.com Industriestrasse 6 6064 Kerns / Switzerland Telefon +41 (0)41 661 22 50 Fax +41 (0)41 661 22 51 HEAT ON With
More informationEQUIPMENT TRAINING CONSULTING
EQUIPMENT TRAINING CONSULTING Worldpoly experience, quality and service For over 50 years, Worldpoly has been heavily involved in the polyethylene pipe industry as a manufacturer of pipe and fittings,
More informationCALPEX Low Temperature System
CALPEX Low Temperature System Flexibly towards a safe future Nou! Ø 125/182 Ø 160/250 Contents Utilise your advantages 3 System description 4 6 Pressure loss 7 Heating range 8 19 Dimension of pipe UNO/DUO
More informationALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70
ALLROUNDER 1 S Distance between tie bars: 1 x 1 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, MACHINE DIMENSIONS 1 S 120 1130 850 min. max. 385 330 255 455 3) 1850 1880 385
More informationHigh Voltage Aluminum, Smooth Aluminum Shield/Sheath
High Voltage Aluminum, Smooth Aluminum Shield/Sheath XLPE Insulation, HDPE Jacket, 69 kv - 138 kv Features True triple vertical extrusion system for optimum insulation concentricity, and excellent electric
More informationQuintas & Quintas Group
Electric Conductors Quintas & Quintas Group Index Quintas & Quintas and Solidal 2 Bare Conductors l uminium Conductors for overhead lines 3 l uminium loy Conductors for overhead lines 4 uminium Conductors
More informationDECOILER AND REWINDER
DECOILER AND REWINDER 02 DECOILER AND REWINDER COILER The history of SOPREM was starting in 1961 when the first simple decoiler has been manufactured. SOPREM coilers are offering a safe decoiling, feeding
More informationIEC SYSTEM FOR CONFORMITY TESTING AND COMMITTEE OF TESTING LABORATORIES CERTIFICATION OF ELECTRICAL EQUIPMENT
IEC SYSTEM FO CONFOMITY TESTING AND CETIFICATION OF ELECTICAL EQUIPMENT COMMITTEE OF TESTING LABOATOIES =equired by Lab S=May be subcontracted TESTING AND MEASUING EQUIPMENT/ALLOWED SUBCONTACTING Power
More informationTable of Contents. CALPEX district heating pipe. 1.0 Table of Contents
1.0 Table of Contents 1.0 Table of Contents 1.1 System description 1.100 System description (general) 1.105 System description (data) 1.106 System description (data) 1.110 Long-term behaviour/lifetime
More informationh Technical Product Data FW Pressure Pipe Systems
h Technical Product Data FW Pressure Pipe Systems E Engineering GmbH All rights reserved. Publication: 10/2012 All rights reserved. No part of this document may be reproduced or utilized in any form or
More information2 Water + Additives kg/h Steam, 4-6 barg kg/h Carbon Black pellets kg/h 9540
1 Carbon black kg/h 4770 2 Water + Additives kg/h 4770 3 Steam, 4-6 barg kg/h 800 4 Carbon Black pellets kg/h 9540 5 Condensate kg/h 800 Wet Pelletizer is used for pelletization of carbon black powder.
More informationRare Plastics Rare SAPPMA IFPA
Rare Plastics manufacture and distribute HPE pipe & fittings from our factory in Meyerton, Gauteng. Pipes are manufactured to SANS ISO 4427 standards and sizes range from 110mm to 1000mm. The PE100 raw
More informationPower & Control Cables. U o. /U 0.6/1 kv - IEC
Power & Control Cables U o /U 0.6/1 kv - IEC 60502-1 2 KERPEN GmbH & Co. KG 07.2005 Printing errors excepted. Subject to alteration List of Contents Introduction Page B1 Construction Page B3 Use Page B4
More informationClariant Waxes for PVC Processing GENERAL
Clariant Waxes for PVC Processing GENERAL Public Beate Treffler BU Additives Technical Marketing Waxes 20.06.2013 Clariant Waxes for PVC Processing CONTENT PRODUCTS APPLICATIONS PERFORMANCE Public Beate
More informationMARK SERIES EXTRUDER
MARK SERIES EXTRUDER Davis-Standard s Mark extruder is built for all applications and value engineered to meet demanding requirements. The Mark is available with a wide range of feedscrews and control
More informationCaledonian Medium Voltage Cables Three Core Cables to VDE 0276-
Three Core Cables to VDE 0276 APPLICATIONS The three core cables are designed for distribution of electrical power with nominal voltage Uo/U ranging from 3.6/6.6KV to 19/33KV and frequency 50Hz. They are
More informationSINCE 1989 Quality Products, Prompt Services, Trustful Relationships www.kmindustrialcorp.com KM Industrial Corporation has established itself as a trusted supplier of Electrical, Machinery and Industry
More informationT-Rack 3.0. Integrated rack solutions for ultrafiltration
T-Rack 3.0 Integrated rack solutions for ultrafiltration T-Rack 3.0 state-of-the-art ultrafiltration solutions Proven T-Rack 3.0 concept safe and reliable operation dizzer UF modules with 80 m² more performance
More informationALLROUNDER 520 A multi-component
Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component
More informationMedium voltage - Cable accessories up to 36 kv. Tapes Connection technique Tools
Medium voltage - Cable accessories up to 36 kv Tapes Connection technique Tools TABLE OF CONTENTS General information... 6 7 CAST RESIN-TECHNIQUE...8 11 Straight-through joints for polymeric-insulated
More informationALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.
Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245
More informationTable of Contents. CALPEX district heating pipe. 1.0 Table of Contents
Table of Contents 1.0 1.0 Table of Contents 1.1 System description 1.100 System description (general) 1.105 System description (data) 1.106 System description (data) 1.110 Long-term behaviour/lifetime
More informationALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.
Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885
More informationPromix Solutions trust the leader. Static Mixers Solutions for Injection Molding
Promix Solutions trust the leader Static Mixers Solutions for Injection Molding Your partner in the plastics processing industry Founded in 2012 as a spin-off of Sulzer Chemtech Subsidiaries in Winterthur,
More informationHigh-Performance Air Rings + Gauge Control Systems Reach Limits
High-Performance Air Rings + Gauge Control Systems Reach Limits High-Tech Air Ring COM3 with integrated Gauge Control System Proven peak performance for your extrusion line The new dimension in bubble
More informationSTRETCH WRAP CAST FILM LINES
STRETCH WRAP 2 3 LINES FOR STRETCH WRAP INTRODUCTION The cast film process is the most efficient method of producing top quality stretch wrap film in the high output range. Innovative detail engineering
More informationALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.
Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191
More informationALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.
Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251
More information600/1000V, PVC Insulated Cables according to IEC
8 Any inquiries, please feel free to contact 600/1000V, PVC Insulated s according to IEC 60502-1 Single core(unarmoured) Two core(unarmoured) Three core(unarmoured) Three core +1(unarmoured) Four core(unarmoured)
More informationALLROUNDER 270 C GOLDEN EDITION
Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33
More informationALLROUNDER 570 C GOLDEN EDITION
Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255
More informationdsx s-tretch Cast Film Extrusion Line PATENT PENDING copyright 2015 Davis-Standard, LLC
dsx s-tretch Cast Film Extrusion Line PATENT PENDING copyright 2015 Davis-Standard, LLC dsx s-tretch Cast Film Extrusion Line Experience Quality at Higher Speeds. Protecting products from damage while
More informationDavis-Standard Is More Than Equipment
Davis-Standard Is More Than Equipment Davis-Standard is recognized as a global leader in high-performance extruders and processing equipment. The reason for this goes far beyond our ability to build efficient,
More informationHigh Voltage Copper, Smooth Aluminum Shield/Sheath
High Voltage Copper, Smooth Aluminum Shield/Sheath XLPE Insulation, HDPE Jacket, 69 kv - 138 kv Features True triple vertical extrusion system for optimum insulation concentricity, and excellent electric
More information