LSS90/ Three-layer Coextrusion Sheet Production Line
|
|
|
- Silvester Simon
- 5 years ago
- Views:
Transcription
1 LSS90/ Three-layer Coextrusion Sheet Production Line Process material: PS PP Max sheet width: 900mmadjustable (layer A -10%, layer B - 80%, layer A - 10%) Sheet thickness range: 0.25~2.0 mm Line speed range: 3-20 m/min By susie zhang August susie@liansu.com Mobile :
2 Under commissioning
3 LSS 90 single screw Extruder Driving motor power:75kw Screw type:separate type Screw L/D 33:1 max extrusion capacity: kg/h Heating zone:5 Heating power: ~40Kw
4 LSS50single screw extruder Driving motor power :11kw Screw diameter:50mm Screw L/D 32:1 Screw type: Separate type Heating zone 4 Heating power: 15kw Cooling zone 4 Dryer of material :Weight of batch for material: 150 kg motor power:18.5kw
5 HMC-II computer Computer control of the whole line: HMC-II system, Siemens PLC S7-300 system adopted, 10 color operation panel, advanced control system internationally While our competitors not use Simens system or use lower class with less stability and not so durable Cables: 3 phase,4 cables We only use international famous brands for all electrical parts to guarantee the stability working for the extrusion lines
6 Electric cabinet Main electric part supplier: Inverter of main motor : ABB Thermo regulating meter: RKC Contactor: Siemens Breaker: Siemens Solid state relay: CELDUC, France
7 Sieve plate exchange device - 2 sets With double position Hydraulic pressure auto-change sieve plate device 2 sets, one set for 90 extruder, the other for 50 extruder Sieve plate exchange mode - Hydraulic pressure auto-change sieve plate without stopping machine Voltage: 220V Electric-thermal rod heating power: 4 kw x 2, enclosed wire connection Sieve plate material 38CrMoAlA,double position. Hydraulic pressure control system, composite of Motor, oil pump, oil tank, switch box,pressure regulator valve ect.. Sealing adopted tin bronze
8 Melting pump for extruders Melting pump for extruder LSS Motor power : 7.5 kw Motor type: Variable frequency Speed adjusting mode frequency control of motor speed ABB Melting pump for extruder LSS Motor power: 2.2 kw Motor type: Variable frequency Speed adjusting mode frequency control of motor speed ABB
9 T-Mould include co-extruder distributor Mode T-type die head cloth rack type 1 set Available width of sheet: min 530 mm max 900 mm For PP, HIPS, GPPS Width of die head: 1100 mm Have 3 layer distributor, thickness can be adjustable 1 set Mould die set material : 5CrNiMoV steel with hard chrome surface plating, Thickness mm Method of adjustment for width : Outside plug up Adjustable thickness range: min 0.2 mm max 2.0 mm Heating mode Stainless steel heating rod control by 5 sects heating voltage 220V, 50Hz, power of each sect: within 4 kw W/ bearing under mould
10 Tri-barrel polishing machine Press roller: Ø 316 mm x 1200 (W) mm, rigidit:hrc49-51 Middle roller: Ø 415 mm x 1200 (W) mm, Cooling roller: Ø 415 mm x 1200 (W) mm Additional cooling roller Ø 160 mm x 1200 (W) mm Roller line speed: V max = 24 m/min Cooling medium: oil, Driving motor: 2.2 kw x 3 Precision mirror polishing: 12 Thickness of chrome: mm Drive mode invertor Type adopt stand tri-barrel mode L type W/ hydraulic pressure station motor power: 1.5 kw W/Tri roller independent motor with spiral gear box Speed adjust: AC motor and Hamsam gear Width of polishing rolls: 1200 mm
11 Tri-barrel polishing machine
12 Three roller heating exchange Oil circulation temperature control system Heating power: 3 x 6 kw Oil pump power: 2,2 kw х 1, 3 kw x 2
13 Cooling convey device Steel roller: Ø 80 mm x 1200 mm Material: aluminium With movable support frame Saw motor cutting unit with speed adjustable function
14 Edge cutting device PS sheet With brown color testing 10% cristal GPPS + 90% OPS with HIPS also with brown masterbatch ( OPS 60% +40% HIPS) Edge cutting device: 1set
15 Two roller hauling unit Hauling rubber roller: Ø 205 mm x 1200 (W) mm, 2 pcs Gap adjust method: air cylinder Speed: inverter Motor: 2,2 kw Haul speed: Vmax = 24 m/min
16 Waste material winder Waste material winder ( Moment motor 2N*M) - 2 Sets
17 Double position winding unit Winding motor 12 Nm Change mode: manually Overturn motor: 3 kw Thickness for sheet: mm Delivered with two shafts diam. 75 mm Maximum winding Diameter: 800 mm Maximum winding width: 1100 mm
18 Finished products Product specification Extrusion line produces two types of sheet: Polymer 3-layers sheet from polypropylene (PP) Polymer 3-layers sheet from high impact polystyrene (HIPS) sheet Ranges of sheet width: min 530 mm max 900 mm Thickness of Sheet: min 0.2 mm max 2.0 mm for HIPS (layer A -10%, layer B - 80%, layer A - 10%) Thickness of Sheet: min 0.35 mm max 1.5 mm for PР (layer A -10%, layer B - 80%, layer A - 10%)
19 For other information of the machine, please refer to the machine specification. Look forward to a Win-win business
SJSZ 80/173 Foam Board Extrusion Line
Date: Jan. 27, 2018 SJSZ 80/173 Foam Board Extrusion Line 1. Equipment List&Price Item Description Unit Price Qty (USD) (Set) 1 SJSZ 80/173 Double Screw Extruder 1 Total Price (USD) 2 Mould - - - 3 Mould
Scientific COMBI 26 mm Twin Screw
Scientific COMBI 26 mm Twin Screw Extruder type LTECC26-40 with Co and Counter-rotating twin screws for compounding of PVC and most other thermoplastic resins 26 mm COMBI twin screw with 15 KW drive and
Testing and Measuring Extruders The high performance machine for plasticizing of polymers and elastomers
Laboratory machines for the processing of polymers Testing and Measuring Extruders The high performance machine for plasticizing of polymers and elastomers From polymer to information Testing Extruder
CONEXTRU GMBH LIST OF PRODUCT DEVELOPMENTS. Page 1 of 5
Page 1 of 5 LIST OF PRODUCT DEVELOPMENTS BY CONEXTRU GMBH MARCH 2009 TO SEPTEMBER 2013 Page 2 of 5 1.0 PO PIPE HEADS mono- multi- cross- heads Helical spiral distributor heads Monolayer spiral head up
Insulating Glass machines
Insulating Glass machines Vertical Insulating Glass Production Line LBZ2500PY Features and specialties: PLC control system with whole process, touch-sensitive screen and man-machine interface. Realize
Labtech Engineering Co., Ltd.
New μcompounder Modular 12 mm twin-screw extruders types LTE 12-36 with segmented screws and screw speeds up to 800 RPM Available both in manual as well as fully computerized version with LCD touch screen
THE EFFECTS OF RUNNING DIFFERENT BARREL TEMPERATURE PROFILES FOR VARIOUS RESINS
THE EFFECTS OF RUNNING DIFFERENT BARREL TEMPERATURE PROFILES FOR VARIOUS RESINS Walter S. Smith Luke A. Miller Jason Willis Timothy W. Womer Xaloy Corporation, New Castle, PA Abstract Differences in solids
Coextrusion system for the production of 3 layer blown film FLEXIBILE MODULAR EFFICIENT
Coextrusion system for the production of 3 layer blown film FLEXIBILE MODULAR EFFICIENT Film coextrusion is becoming more and more widespread in the packaging industry and is quickly replacing monolayer
General Specification
General Specification OF NV-100mmSG (Mod.2) Single Screw Extruder Freesia Macross Corporation April 2009 1. Type General purpose single screw extruder 2. Capacity 300-500 kg/h (ABS pellet) 3. Dimension
ALLROUNDER 920 S. Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600
ALLROUNDER 920 S Distance between tie bars: 920 x 920 mm Clamping force: 5000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 MACHINE DIMENSIONS 920 S 2425 4) 2530 5) 1670 4) 1697 5) 848 4) 878 5)
ALLROUNDER 920 A. Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 920 A Distance between tie bars: 920 x 920 mm Clamping force: 4600, 5000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 920 A 877 239 707 1100 2229 1207 1697 2671 max.430
ALLROUNDER 520 H. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800
ALLROUNDER 520 H Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800 MACHINE DIMENSIONS 520 H 2002 1348 255 849 120 330 max. 385 438 507 800
ALLROUNDER 820 A. Distance between tie bars: 820 x 820 mm Clamping force: 3700, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100
ALLROUNDER 820 A Distance between tie bars: 820 x 820 mm Clamping force: 3, 4000 kn Injection unit (acc. to EUROMAP): 1300, 2100 MACHINE DIMENSIONS 820 A 875 567 707 1100 178 433 482 2355 625 2800 3) 7476
ALLROUNDER 570 E. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800
ALLROUNDER 570 E Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800 MACHINE DIMENSIONS 570 E 1900 850 150 330 520 1285 825 435 605 1000 280 5185
ALLROUNDER 470 A. Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP): 170, 290, 400
ALLROUNDER 470 A Distance between tie bars: 470 x 470 mm Clamping force: 1000 kn Injection unit (acc. to EUROMAP):, 290, 400 MACHINE DIMENSIONS 470 A 840 330 438 1302 2050 2124 1)2) 2139 3) 400 1109 max.
ALLROUNDER 170 S. Distance between tie bars: 170 x 170 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, 70
ALLROUNDER 1 S Distance between tie bars: 1 x 1 mm Clamping force: 125, 150, 180 kn Injection unit (acc. to EUROMAP): 30, MACHINE DIMENSIONS 1 S 120 1130 850 min. max. 385 330 255 455 3) 1850 1880 385
ALLROUNDER 1800 T. Table diameter: 1800 mm Clamping force: 2000, 2500, 3200 kn Injection unit (acc. to EUROMAP): 400, 800, 1300, 2100
LLROUNDER 1 T Table diameter: 1 mm Clamping force: 2000, 2500, 3200 kn (acc. to EUROMP): 400,, 1300, 2100 MCHINE DIMENSIONS UP TO 2000 KN 1 T NCG 1150 997 4165 1) 4145 1) 2457 2110 4625 2) 4525 2) 1600
Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.
Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850
techbex The All-in-One solution for technical profiles
techbex The All-in-One solution for technical profiles Extrusion of technical profiles The techbex line concept is ideally suited for the extrusion of single-walled technical profiles and hollow profiles
ALLROUNDER 720 A Multi-component
Facts and figures ALLROUNDER 72 A Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 8, 13, 21 horizontal 7, 17, 29, 4 vertical www.arburg.com 72 A Multi-component
GZPK0222 SERIES HIGH SPEED ROTARY TABLET PRESS
GZPK0222 SERIES HIGH SPEED ROTARY TABLET PRESS A brief introduction of GZPK2000 series high speed rotary tablet press 1) It is suitable for use in the pharmaceutical industry (except materials that are
Trust And Reliability. Roller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD.
Trust And Reliability Roller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD. V33/V43 FEED SYSTEM Heavy duty linear ways are imported from Germany, which are well balanced,
ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200
Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385
ALLROUNDER 720 S Multi-component
Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component
ALLROUNDER 520 A multi-component
Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component
ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395
ALLROUNDER 520 E. Distance between tie bars: 520 x 520 mm Clamping force: 1500 kn Injection unit (acc. to EUROMAP): 290, 400, 800.
Facts and figures ALLROUNDER 52 E Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit (acc. to EUROMAP): 29, 4, www.arburg.com 52 E Machine dimensions 2 135 85 12 33 4 13 625 4885
ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.
Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245
ALLROUNDER 820 S Multi-component
Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component
Facts and figures ALLROUNDER 275 V. Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP): 70, 100.
Facts and figures ALLROUNDER 275 V Vertical free-space system Clamping force: 250 kn Injection unit (according to EUROMAP):, 100 www.arburg.com 275 V Installation dimensions 900 665 1782 2880 1) 3025 2)
ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207
820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )
Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342
ALLROUNDER 570 H. Distance between tie bars: 570 x 570 mm Clamping force: 2000 kn Injection unit (acc. to EUROMAP): 400, 800, 1300.
Facts and figures ALLROUNDER 57 H Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 4, 8, 13 www.arburg.com 57 H Machine dimensions 22 148 85 438 2242 1) 2251
ALLROUNDER 630 A. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com Machine dimensions 2217 227 1487 max. 450 877
ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.
Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191
ALLROUNDER 570 C GOLDEN EDITION
Facts and figures ALLROUNDER 57 C GOLDEN EDITION Distance between tie bars: 57 x 57 mm Clamping force: 2 kn Injection unit (acc. to EUROMAP): 8 www.arburg.com 57 C GOLDEN EDITION Machine dimensions 255
ALLROUNDER 270 C GOLDEN EDITION
Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33
HIGH SPEED AND AUTOMATIC SLITTING LINE Model: ZJX0.5-4X1600
HIGH SPEED AND AUTOMATIC SLITTING LINE Model: ZJX0.5-4X1600 I. Main technical Parameters: Steel coil parameters Slitter parameters Material Tensile strength Steel thickness Steel width Steel coil I.D Steel
ALLROUNDER 470 S Multi-component
Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions
ALLROUNDER 470 S. Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP): 170, 290, 400
Facts and figures ALLROUNDER 470 S Distance between tie bars: 470 x 470 mm Clamping force: 800, 1000, 1100 kn Injection unit (acc. to EUROMAP):, 290, 400 www.arburg.com 470 S Machine dimensions 585 330
ALLROUNDER 520 S. Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, 800
Facts and figures ALLROUNDER 520 S Distance between tie bars: 520 x 520 mm Clamping force: 1300, 1500, 1600 kn Injection unit (acc. to EUROMAP): 290, 400, www.arburg.com 520 S Machine dimensions 580 330
GENERAL SPECIFICATION. NR2-46mm (Mod.5) Pelletizing Machine FREESIA MACROSS CORPORATION
GENERAL SPECIFICATION NR2-46mm (Mod.5) Pelletizing Machine FREESIA MACROSS CORPORATION Ver. 2013 CONTENTS 1 Component of machine 1-0. Specification 1-1. Barrel 1-2. Screw 1-3. Gear Box 1-4. Twin screw
Aluminum Rod. LLZ Electric. Continuous Casting and Rolling line
Pure Aluminum Rod LLZ-15-1600 Electric Aluminum Rod Continuous Casting and Rolling line Technical Specification Foshan Metech Aluminum Technology CO., LTD Office address: 2 nd Floor, E1 building, Jiulong
High quality covering of rolls, tubes, sleeves and rods Roll covering machinery, strip winding, Covermatic and crosshead systems
High quality covering of rolls, tubes, sleeves and rods Roll covering machinery, strip winding, Covermatic and crosshead systems Engineering Value 3 Roll covering machinery Constantly high product quality
Corrugated paper: 4mm. Max punching speed: 7500 sheets/hour Max stripping speed: 6500 sheets/hour
Commodity name: HIGH ABILITY FULLY AUTOMATIC DIE-CUTTING MACHINE (Paper feeder, die-cutting unit, waste removal unit, delivery station, and electrical section) Model: CM-1050-SE Specifications: Max paper
ICE-Trade Belt Winders & Supports
Mlynarska 3 SK - 902 03 Pezinok Slovakia ICE-Trade Belt Winders & Supports The ICE-Trade Belt Winders are produced to size according the specs of the customer : the width, diameter, weight of the belts
ALLROUNDER CUBE 2900
Facts and figures ALLROUNDER CUBE 29 Distance between tie bars: 82 x 82 mm Clamping force: 29 kn Injection unit: 4, 8, 13, 21, 32 horizontal 7, 17, 29, 4, 8, 13 moving www.arburg.com CUBE 29 Machine dimensions
LAB SCALE EQUIPMENTS.
SINCE 1973 OBSESSED WITH QUALITY LAB SCALE EQUIPMENTS ...the art of perfection since 1973 Since 1973, Neoplast is known as the reliable and efficient partner in plastic industry. What started as a small
ATL 12 ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. La =Lc + Stroke Lc T. Rear bracket SP. Stroke. Capacitor
ACME SCREW LINEAR ACTUATOR Stroke OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor Rear bracket SP Pin Standard head with threaded hollow bore BA depth 17 Stroke end reed switches FCM Lenght Stroke 300
your partner in leading technology tecnocanto Extrusion Extrusão Recycling Reciclagem Packaging Embalagem
your partner in leading technology Extrusion Extrusão Recycling Reciclagem Packaging Embalagem Heating elements TC.C1-REV Ø, lda @.pt www..pt lines Pipes / Profiles 3D printer filaments, lda @.pt www..pt
Technical Information
European debut of new TEX34αIII - worldwide highest performance compact twin-screw extruder Following introduction of its new compact TEX34αIII high-performance compounding extruder at the October 2017
Belt Press KD 10. Function The sludge dewatering takes place in three phases.
Belt Press KD 10 Belt Press KD 10 The belt press models KD 10-1500 / - 2500 constitute a new generation of high-pressure belt filter presses constructed and produced by Danish Wasterwater Equipment A/S.
Belt Press KD 12. The presses are high-technology quality products, based upon the experiences from the larger belt press series KD10 og KD11.
Belt Press KD 12 Belt Press KD 12 The belt presses model KD 12-800 / -1200 constitutes a new generation of presses designed and manufactured by Danish Wastewater Equipment A/S, in order to meet the less
No or low cost Extrusion Coating Improvements
No or low cost Extrusion Coating Improvements Tappi India Conference Senior Sales Engineer Davis-Standard, LLC Challenges in Extrusion Coating Flexible Laminations Single or Multiple Extruder Carriage
Flexible production systems
extrusion----and ooling---systems--powder------paint production----- We have unparalleled experience in producing and supplying steel belt cooling systems, meeting the production, quality and environmental
ENGINEERING+MANUFACTURING. DUNST extruders for the cable production
DUNST extruders for the cable production The DUNST extruders for all applications An ever broadening spectrum of thermoplastics and applications calls for versatile processing machinery solutions. The
RANDCASTLE S CAST FILM/COATING LINES
RANDCASTLE S CAST FILM/COATING LINES Model RCP-1000, 1 Inch Extruder With 12 Inch Flex Lip Die For Cast Film, Coating And Lamination Patents: 5,486,328; 5,518,672, 5,569,429 Other U.S. And Foreign Patents
ZE Performance twin-screw extruders Boosting profitability in compounding
ZE Performance twin-screw extruders Boosting profitability in compounding Engineering Value ZE Performance key features Impressive highlights at a glance Long-lasting barrel elements of different design
30/40/55-70mm. Max. Total Capacity kva 83(25:1 L/D) or 93 (30:1 L/D) Machine Supply Transformer Size kva 93 Capacity Machine Requirements
440 S P E C I F I C A T I O N S 30/40/55-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 30 40 55 gm 850 1,134 1,559 Theoretical Disp in^3 55.8 74.5 99.2
Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 88 Supply
750 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
C purlin automatic adjustable roll forming machine. Technical Specification
C purlin automatic adjustable roll forming machine Ⅰ: General properties Technical Specification Maximum production speed: not less than 15 meters per minute excluding cutting and punching); Bending precision:
PNEUMATIC QUARTER TURN RACK & PINION ACTUATOR MODEL - HP
FEATURES AND BENEFITS Aluminium body, hard anodized, internally polished to 45-50µ and Nickel plated to protect against wear and corrosion Open/Closed indicator is standard on all models Travel adjustment
ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Motor cable length 0.3 m. T [mm]
![ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Motor cable length 0.3 m. T [mm]](/thumbs/89/99042795.jpg "ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Motor cable length 0.3 m. T [mm]")
ACME SCREW LINEAR ACTUATOR ATL 02 Stroke Actuator with DC motor La =Lc + Stroke Lc T OVERALL DIMENSIONS Rear bracket SP Pin Actuator with or 3-phase motor Capacitor Stroke end reed switches FCM Motor cable
CNC gantry-type machining center. PSD-Mill CNC
gantry-type machining center PS-Mill T e c h n i c a l a t a s h e e t xtremely robust and solid base frame provides great rigidity, stability and vibration-free work even with heavy duty cutting Rigid
Pelletising Systems. Moulding & Recycling Underwater pelletising systems for up to 15,000kg/hr. Strand pelletisers
Pelletising Systems 0 Underwater pelletising systems for up to 5,000kg/hr Our modular pelletising systems are highly cost efficient & cover a wide range of applications: Primary pelletising Masterbatch
Die cutting and stripping machine with hot foil stamping. model Brausse SIGNA 1050F Hybrid
Die cutting and stripping machine with hot foil stamping model Brausse SIGNA 1050F Hybrid All machines installed by Brausse Europe will have the VinTechMa label. www.vintechma.com 1 Highlights of all Brausse
219mm X 9.0mm HF ERW Tube Mill Line
219mm X 9.0mm HF ERW Tube Mill Line ES-11216 1. Outline :114.3-219.1ERW pipe mill is used to produce pipes in accordance with API-5L /API-5CT Standard, which includes gas& oil delivery pipes, oil casting
Chiller assembly line Testing Lab. Painting line CNC machine
Shandong Vicot Air Conditioning Co., Ltd. is one of the major players in the Chinese air conditioning industry, specialized in central air conditioning products. Its new industrial park covers a total
F86 two dynamic versions
wifag//polytype group F86 two dynamic versions Thermoformer for high production of lids and other shallow products of any type of thermoformable materials Large forming area with OMV pre-clamping technology
GB. SIMATEK UNIVERSALELEVATOR Capacity BULK SYSTEMS A/S. X, Y, Z : The measurement are in Meters
SIMATEK UNIVERSALELEVATOR Capacity Filling Zone 1 =62% Filling Zone 2 =70% Construction form "A", "B", "D1", "H", "T1" Construction form "C", "D2", "T2" Chain- Chain- Type Gear speed Kap. Type Gear speed
4.7 Polymer Preparation and Dosing Systems Ultromat
4.7 Polymer Preparation and Ultromat 4.7.7 POLYMORE For Liquid Polyelectrolytes POLYMORE is an in-line polymer preparation station for the processing of liquid polymers. Using a peristaltic pump, the liquid
BRAIDING TECHNOLOGY ℇ ℇ ℇ ³ ø Ø ³ ø Ø Wardwell spring combinations and tensions for 16 and 24 carrier wire braiders U = "speedmaster 150 and 100" L = for plain copper and coper coated wires uppercarrier
72/96/130-70mm. Electric Specifications Input Power Source 230 VAC +/- 10% 3Ph 60Hz Std. Power. Machine kva 91 Supply
935 S P E C I F I C A T I O N S 72/96/130-70mm English Metric Injection Unit Specifications A B C A B C Injection Capacity, Max. GPPS oz 72 96 130 gm 2,041 2,722 3,686 Theoretical Disp in^3 134.1 178.6
Reference catalogue
12 / 2011 Reference catalogue 2011-2012 Slip-ring induction motors High voltage motors Competent Service From stock Quality Engaging Three-phase motors Know-How Gear motors Guidance Reliability DC motors
Power Factor Correction
Power Factor Correction Medium Voltage Automatic Capacitor Bank Save energy and reduce Carbon dioxide emission! FRANKE GMKP LTD. Http://www.frankegmkp.com 17015 Berlin,Germany Email:info@frankegmkp.com
GCBA Series Biomass Briquette Machine
GCBA Series Biomass Briquette Machine Output capacity kg/h Motor Power (kw) Electric heater (kw) Size of briquettes Size of inside hole Density of briquettes Weight(kg) Warranty Overall dimension(mm) GCBA-I
MARK SERIES EXTRUDER
MARK SERIES EXTRUDER Davis-Standard s Mark extruder is built for all applications and value engineered to meet demanding requirements. The Mark is available with a wide range of feedscrews and control
ACME SCREW LINEAR ACTUATOR. OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor
ACME SCREW LINEAR ACTUATOR ATL 10 AC motor Stroke OVERALL DIMENSIONS La =Lc + Stroke Lc T Capacitor Rear bracket SP Pin Standard head with threaded hollow bore 80 BA depth 17 Stroke end reed switches FCM
HITACHI ELECTRIC CHAIN HOISTS
HITACHI ELECTRIC CHAIN HOISTS Hitachi s reputation for excellence in design, quality, reliability and performance has made this brand a global market leader. With over three decades of proven reliability
HAIE2 -Efficiency and reliability for industry
HAIE2 -Efficiency and reliability for industry High performance with energy efficiency, this is the meaning of the new CAG electric motor. Low cost and best quality and long lifetime have been the basis
RAPIDMIX 400CW. Length of Machine (19.5m) Length when erected Width of Machine 9-10 (3.00 m) Width Same
Machinery Manufacturers to the Concrete Industry RAPIDMIX 400CW The Rapidmix 400CW has been designed to be totally mobile and completely self-contained with its own power source. It is also completely
VALUE KING ELECTRIC WIRE ROPE HOIST. COLUMBUS McKINNON CORPORATION LIFTING MOTOR BRAKE REDUCER DRUM WIRE ROPE ROPE GUIDE
VALUE KING ELECTRIC WIRE ROPE HOIST LIFTING MOTOR BRAKE REDUCER DRUM WIRE ROPE ROPE GUIDE COLUMBUS McKINNON CORPORATION VALUE king Advantages: Light weight, compact design, with maximum use of space Leading
POWER CAPACITORS. Cylindrical capacitor standard duty
Construction Dielectric: Polypropylene film Non PCB, Soft Polyurethane resin Extruded round aluminium can with stud Provided with discharge resistors Overpressure disconnector Features Three phase, delta
CometNews. Introducing a NEW high pressure plunger pumps. TW 500 bar FW 2. November 2011 Number 0 Year I Comet spa information
November 2011 Number 0 Year I Comet spa information CometNews November 2011 Number 0 Year I Comet Spa CometNews Introducing a NEW high pressure plunger pumps TW 500 bar FW 2 TW-TWS 500 bar 8 Plunger pumps
VP-1100/1500 Vertical Machining Center
VP-Series VP-10/1500 Vertical Machining Center http://www.twinhorn.com.tw RIGID CONSTRUCTION INNOVATIVE DESIGN SUPERIOR PRODUCTIVITY All major parts are built with high tensile Meehanite cast iron, featuring
EXTRU - the reliable extrusion gear pump
EXTRU - the reliable extrusion gear pump The EXTRU is mainly used in conjunction with extruders or kneaders. It reduces the natural pulsation and irregular conveyance, particularly in single-screw extruders,
BROCHURE. IE4 SynRM motor-drive packages Super premium efficiency for industry
BROCHURE IE4 SynRM motor-drive packages Super premium efficiency for industry 2 BROCHURE IE4 SYNRM MOTOR-DRIVE PACKAGES 3 Energy efficiency. Usability. Productivity Everything counts ABB s SynRM motor-drive
PROTECT DRIVES YOU AUTOMOTIVE TRANSPORT PROTECTION.
AUTOMOTIVE PROTECT W H A T DRIVES YOU AUTOMOTIVE TRANSPORT PROTECTION www.nmc-nomafoam.com 1 2 INDEX PROCESSING NEW VEHICLE TRANSPORT PROTECTION 8 Bumper protection 10 Door protection 12 Door handle protection
Screw Compactor without feeding device
Screw Compactor without feeding device foils, residual waste, polystyrene, PET bottles (pre-crushed) 1500 x 1420 x 1300 mm 1400 x 1200 mm 11 kw / 15 kw 50 A / 63 A 22,5 A / 30 A foils 4,5 6,0 t residual
SLITTING AND CUT TO LENGTH LINE Model: ZJX0.5-5X1600 Main technical Parameters: No. Name Unit Parameters 1 Control model Frequency conversion control
SLITTING AND CUT TO LENGTH LINE Model: ZJX0.5-5X1600 Main technical Parameters: No. Name Unit Parameters 1 Control model Frequency conversion control 2 Materials CRS/HRS(1-4mm)SS(1-3mm) Number of slitting,
Facts and figures ALLROUNDER 1500 T
Facts and figures ALLROUNDER 15 T Table diameter: 59.6 (15 mm) Clamping force: 176, 22, 275, 35 tons : 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz www.arburg.com 15 T Machine dimensions up to 22
Part-No. Article / Version Supply A Tilt foot bar of ABS, off-white RAL 9002 A
*Mounting angle ( ) on the adapter serves as a support to locate the case in the right position. After attachment of the adapter, the mounting angles can be easily removed. Tilt foot bar, Case feet TILT
SINUS PENTA 2T/4T SINUS PENTA 2T/4T
SINUS PENTA 2T/4T SINUS PENTA 2T/4T Technical Highlights One product, 5 integrated functions - IFD (Inverter Frequency Drive): vector modulation function for general-purpose applications (V/F pattern).
EXPLOSION-PROOF ELECTRIC WIRE ROPE HOIST BWX
The BWX electric wire rope hoists are the best as versatility and features, matching requirements of hazardous area. One single lifting speed or two lifting speeds are got with the application of inverter
MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC
MODEL INFORMATION CANNED MOTOR PUMP TYPE CAM HERMETIC ... 3... 4 3000 rpm 50 Hz / 3600 rpm 60 Hz... 4... 5... 7 Modular pump / motor systems... 7 Materials...........................................................
Best for foam fabrication and other coating operations
Best for foam fabrication and other coating operations The hot wheel coater is fitted with two flanges at the end of the desk. By drawing the object over the desk across the flat surface of the coating
TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing
TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the
EXPOSÉ Wet spinning frame
EXPOSÉ Wet spinning frame Content Designation Page View complete plant 3 Operating data 3 View winder-line 4 Detail view winder-line 5 View module 6 Machine facts 6 Detail view module 7 Module side view
OFF-GRID Hybrid (BI-DIRECTIONAL) SOLAR INVERTER SOLAR INVERTER SOLAR UPS
OFF-GRID Hybrid (BI-DIRECTIONAL) SOLAR INVERTER SOLAR INVERTER SOLAR UPS ITS Power & Infrastructure Pvt. Ltd. is a leading designs, manufacturer & supplier of power product. ITS Power Company is in Bavdhan,
ILT Italy Srl Via Cancelliera 10a Albano Laziale Rome Italy Tel Fax
SELF CLIMBING HOIST LD LIGHTING SUSPENSION MOD. 8600LD, SWL 140 kg. Over Grid Version Mod. 8601LD DATA SHEET 2/7/2018 The letters in the Model Number stand for: LD Light Duty = up to 140 kg. SWL The illustration