CometNews. Introducing a NEW high pressure plunger pumps. TW 500 bar FW 2. November 2011 Number 0 Year I Comet spa information
|
|
- Randolph Richards
- 5 years ago
- Views:
Transcription
1 November 2011 Number 0 Year I Comet spa information CometNews November 2011 Number 0 Year I Comet Spa CometNews Introducing a NEW high pressure plunger pumps TW 500 bar FW 2
2 TW-TWS 500 bar 8 Plunger pumps for industrial heavy duty use Reliability and long life Flow up to 26,7 l/min 7,0 g.p.m ø 98 interasse viti M8 Pressure up to 503 bar 7300 psi 3 35 M6 Ø centraggio ø M8 Ø centraggio ø TW - TWS 500 bar Code Model RPM Flow rate Pressure Power Weight l/min US gpm bar psi Mpa kw HP Kg lb TW 3570 S - ø ,0 3, ,3 16,5 12,1 23,0 50, TW 4070 S - ø ,8 3, ,3 18,8 13,8 23,0 50, TW 4070 S - ø ,2 4, ,3 19,3 14,2 23,0 50, TW 4570 S - ø ,2 4, ,3 20,2 14,9 23,0 50, TW 5070 S - ø ,9 5, ,3 25,2 18,6 23,0 50, TW 5570 S - ø ,0 5, ,3 27,9 20,5 23,0 50, TWS 4070 S - ø ,7 4, ,3 19,3 14,6 23,0 50, TWS 4570 S - ø ,5 4, ,3 22,1 16,3 23,0 50, TWS 5070 S - ø ,4 4, ,3 23,2 17,1 23,0 50, TWS 6070 S - ø ,5 6, ,3 28,5 21,0 23,0 50, TWS 7070 S - ø ,7 7, ,3 33,7 24,7 23,0 50,7
3 TW-TWS 500 bar Stainless-steel hardened guide PISTONS CRANKCASE COMPLETE WITH FINS for low oil temperature. Made of die-cast aluminium alloy, anodized for surface protection SPECIAL ALUMINIUM ALLOY CONRODS made in a double piece DELIVERY VALVES PLUG O-RING OIL SEAL SYSTEM between crankcase and rear Cover Oil level VIEWER FORGED BRASS HEAD with high mechanical resistances REMOVABLE SUCTION MANIFOLD for easy check valves inspection Top-quality and oversized CONICAL ROLLER BEARINGS with COVERS for adjusting the pre-load Ø 30 MALE SHAFT, for coupling to pulley, with joint, to reduction gear or special female-shaft electric motor HIGHLY EFFICIENT CHECK VALVES in stainless steel EXCLUSIVE PACKAGING SYSTEM High pressure seals: high quality self lubricating Braided Graphite Packings Low pressure seals: special buna-textile Packings with Anti-extrusion rings Solid CERAMIC PLUNGERS EXCLUSIVE CRANKCASE OIL SEALING SYSTEM it minimizes the wearing on pistons Wearable area Oil seal working area 3 3
4 FW2 Plunger pumps for industrial heavy duty use Reliability and long life Flow up to 22,4 l/min 5,9 g.p.m. Pressure up to 278 bar 4000 psi SOLID SHAFT ø 24 mm SOLID SHAFT ø 24 mm HOLLOW SHAFT 1 1/8 HOLLOW SHAFT ø 25 mm 35 1,37 7 0,27 Ø 25 Ø 0,98 FW2 (1450 r.p.m. > 1750 r.p.m.) Code Model Flow rate Pressure Power Weight RPM l/min US gpm bar psi Mpa kw HP Kg lb FW S ,0 3, ,7 7,0 5,1 8,8 19, FW S ,0 3, ,6 9,5 7,1 8,8 19, FW S ,4 4, ,2 5,5 4,0 8,8 19, FW S ,2 4, ,7 7,5 5,5 8,8 19, FW S ,2 4, ,7 7,5 5,5 8,8 19, FW S ,0 4, ,8 11,0 8,2 8,8 19, FW S ,5 4, ,6 12,2 9,0 8,8 19, FW S ,8 5, ,7 10,0 7,5 8,8 19, FW S ,0 5, ,2 7,5 5,5 8,8 19, FW S ,0 5, ,7 10,5 7,7 8,8 19, FW S ,0 5, ,7 7,7 10,5 8,8 19, FWS E ,9 2, ,7 5,8 4,2 8,9 19, FWS E ,6 3, ,2 5,2 3,8 8,9 19, FWS S ,7 3, ,7 7,0 5,1 8,9 19, FWS E ,7 3, ,7 7,0 5,1 8,9 19, FWS G ,7 3, ,7 7,0 5,1 8,9 19, FWS G ,7 3, ,7 7,0 5,1 8,9 19, FWS S ,7 4, ,7 7,5 5,5 8,8 19, FWS E ,7 4, ,7 7,5 5,5 8,9 19, FWS G ,7 4, ,7 7,5 5,5 8,9 19,6 126,6 4, ,18 35,15 1,38 M , ,06 Ø 24 Ø 0,94 Ø 61 Ø 2, ,26 118,5 4, ,88 126,6 4,98 3,74 130,5 5, ,18 35,15 1,38 M ,63 247,5 9, ,06 Ø 24 Ø 0,94 Ø 61 Ø 2, ,83 131,25 5,16 3 0,11 G 1/2 G 3/8 10 0, ,89 93,25 3,67 Nϒ4 FORI Ø 13,5 Ø 0, ,47 Ø 114,3 Ø 4,5 31,5 1,24 Ø 28,6 Ø 1,12 Ø 149,2 Ø 5,87 Ø 184,15 Ø 7,25 6,25 0,24 18,9 0,74 134,3 5, , ,3 14,8 0, ,77 28,3 1, ,35 0,23 9 0,35 FW2 (1750 r.p.m.) Code Model Flow rate Pressure Power Weight RPM l/min US gpm bar psi Mpa kw HP Kg lb FWS G ,7 4, ,7 7,5 5,5 8,8 19, FWS S ,7 4, ,6 11,0 8,2 8,8 19, FWS S ,5 4, ,7 10,0 7,5 8,8 19, FWS E ,5 4, ,7 10,0 7,5 8,9 19, FWS E ,8 5, ,7 10,0 7,5 8,9 19, FWS G ,8 5, ,7 10,0 7,5 8,9 19, FWS G ,8 5, ,7 10,0 7,5 8,9 19, FW2 S 5040 S ,0 5, ,6 14,0 10,5 8,8 19, FWS S ,1 5, ,7 10,0 7,5 8,8 19, FWS S ,6 5, ,2 10,0 7,5 8,8 19, FWS E ,0 5, ,7 10,5 7,7 8,9 19, FWS S ,0 5, ,7 10,5 7,7 8,8 19, FWS S ,4 5, ,8 7,5 5,5 8,8 19,4 34 1,33 4,5 0,17 9 0,35 76,5 3,01 Nϒ8 fori M8 31,5 1, ,74 247
5 FW2 INTERCHANGEABILITY of dimensions and couplings with FW and HW pumps Stainless-steel hardened guide PISTONS (in common with FW and HW pumps) REVERSIBLE CRANKCASE COMPLETE WITH FINS for low oil temperature. Made of die-cast aluminium alloy, anodized for surface protection O-RING OIL SEAL SYSTEM between crankcase and rear Cover Bronze-alloy CONRODS made in a single piece (in common with the FW and HW pumps) Solid CERAMIC PLUNGERS (in common with FW, HW, RW pumps) DOUBLE oil level VIEWER LARGE SUPPORT SURFACE of gasket Rings on Crankcase FORGED BRASS HEAD with high mechanical resistances (in common with FW and HW pumps) Top-quality and oversized CONICAL ROLLER BEARINGS with COVERS for adjusting the pre-load (in common with the RW pumps) HIGHLY EFFICIENT CHECK VALVES in stainless steel (in common with the FW and HW pumps) DOUBLE V-SHAPED BUNA-TEXTILE SEALS (for high and low pressure) with intermediate lubrication and drip recovery (in common with the FW and HW pumps) ø 24 MALE SHAFT, for coupling to pulley, with joint, to reduction gear or hollow-shaft electric motor 1 1/8 FEMALE SHAFT WITH FLANGE for coupling to electric motor NEMA TC ø 25 FEMALE SHAFT WITH FLANGE, for coupling to combustion engine with reduction gear ø Shafts in common with the RW pumps 5 5
6 Comet spa, a world Player that continues to grow Comet spa is an international business founded on the strength of a world-renowned brand. With 3 production sites, many branches and numerous distributors, Comet works in more than 70 countries around the globe. In addition to Italy, where the company has consolidated its position of absolute prestige, Comet is particularly active in the European and international markets; with most of its turnover produced here, Comet is one of the leading continental businesses in the sector. Continuous technological innovation of products and processes and the internationalisation of its sales network have also helped the company s constant growth in turnover over the years. Comet spa is an international excellence that enjoys the appreciation of the whole sector, earning a reputation as one of the leading world players. COMET SPA - ITALIAN EXCELLENCE IN THE WORLD The Comet Brand is known the world over for the excellence of its product and for the high value of its customer service. All this helps towards creating a Comet product uniqueness, from design to production, from quick and secure distribution to all-round before- and after-sales assistance. COMET SPA STRONGLY BELIEVES AND INVESTS IN EMERGING MARKETS With its deep-rooted know-how and skills, Comet spa is able to win important challenges in the domestic and international markets, and is looking forward to continuing to compete openly with all leading global competitors.
7 CometNews /2012 COMET SPA Reggio Emilia Italy phone Comet, Italian Excellence
DIMENSIONS. Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F
Plunger Pumps XMA 1750 RPM E VERSION 1 1/8 WITH NEMA 182-184 FLANGE FEATURING MANIFOLD: High strength forged brass for long term use. DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid
More informationXTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
More informationXMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid ceramic
More informationMay Number 6 AUTOPROMOTEC 2017 BOLOGNA IT
May 2017 - Number 6 CTrade Fair Report AUTOPROMOTEC 2017 BOLOGNA IT 02 Comet Trade Fair Report BOLOGNA ITALY Autopromotec 2017, there is strength in numbers COMET and PTC present their new products at
More informationCTrade Fair Report EIMA INTERNATIONAL 2014 BOLOGNA IT
November 2014 - Number Comet Trade 3 Fair Report 01 CTrade Fair Report EIMA INTERNATIONAL 2014 BOLOGNA IT 02 Comet Trade Fair Report BOLOGNA ITALIA EIMA 2014, a global event Record breaking edition for
More informationSJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING SJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS MANIFOLD: High strength forged brass for long term use. BOLTS: Three 8mm grade 8.8. PISTONS: Ceramic coated stainless
More informationApplications: Benefits: Specifications TTV KKV KTV HD
Applications: Heavy duty slow speed triplex pumps, flows to 42 lpm and pressures to 4300 psi (300 bar). As used on Aussie Monsoon series electric pressure cleaners and BB series Drive System: 4 pole electric
More informationBSM ROTARY GEAR PUMPS
-SERIES FLG. MTD. PUMP PUMP FOOT The BSM -Series pumps are designed to provide quiet and efficient service at standard motor speeds, moderately high pressures. Typical applications are supplying hydraulic
More informationAussie Pumps BERTOLINI PUMPS WBL SERIES SLOW SPEED SUIT ELECTRIC MOTOR MOUNTING OR GEARBOX DRIVE SLOW SPEED - ELECTRIC DRIVE
BERTOLINI PUMPS WBL SERIES SLOW SPEED SUIT ELECTRIC MOTOR MOUNTING OR GEARBOX DRIVE Super Cool Fin System... die cast alloy crankcase, ribbed for efficient cooling, with high thermal conductivity SLOW
More informationA member of the Interpump Group
FEATURES Nickel-plated cast manifold manufactured like heavy-duty pump line Triplex Plunger Pump, Gas New generation seal package New dust protection chamber TRIPLEX TRIPLEX Solid ceramic plungers New
More informationTriplex Plunger Pump, Total Start-Stop Feature
GENERAL PUMP A member of the Interpump Group ET Series FEATURES Total start-stop feature allows flow to activate electric motor Built-in unloader Triplex Plunger Pump, TRIPLEX TRIPLEX Nickel-plated cast
More informationGENERAL PUMPA member of the Interpump Group
FEATURES Innovative drive design eliminates need for auxiliary hydraulic drive HWB Series Hydraulic Drive - Triplex Plunger Pump HWB2512 & HWB2112 Forged brass manifold No scheduled maintenance required
More informationAR North America. Bomporto Plant
Lit1-21 AR North America Modena Plant Shanghai Plant (PRC) Bomporto Plant AR High Pressure Pumps are the state-of-the-art choice since 1958. AR North America Annovi-Reverberi Pressure Pumps: Engineered
More informationPlunger Pumps. XT Series Pumps NORTH AMERICA. Description. Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information.
More informationYOUR GLOBAL PARTNER FOR HIGH EFFICIENCY EXTRUDER DRIVES
YOUR GLOBAL PARTNER FOR HIGH EFFICIENCY EXTRUDER DRIVES GEARBOXES AND DRIVE PACKAGES FOR EXTRUSION, COMPOUNDING AND INJECTION MOLDING MACHINES Sponges, PVC pipes, colored granules, profi le of high performance
More informationF20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads
F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E
More informationHWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES
GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal
More informationPump Catalog Value focused by exceeding expectations for quality, reliability and support.
Pump Catalog Value focused by exceeding expectations for quality, reliability and support. Choose Cat Pumps and Build Your Bottom Line Durability and Reliability Start Here Cat Pumps global mission is
More informationD/G-12 Series. Up to 8 gpm (30.3 l/min)
D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell
More informationSPARE PART LIST LW 300 E & LW 450 E
SPARE PART LIST LW 300 E & LW 450 E Nautico Maldives Pvt Ltd H. Oleander Hiththafinivaa Magu Male' Tel: + 960 31 52 53 Fax: + 960 32 44 96 Mobil: 00960 77 23 81 --------00960 77 88 79 E-mail: nautico@dhivehinet.net.mv
More informationPlunger Pumps. Plunger Pumps LIMITED WARRANTY
Torque Specifications in/lbs:(ft/lbs) Oil Manifold Piston Rear Side Valve Connecting Capacity (Head) Nut Cover Cover Cap Rods 92/(5) N/A 71/(6) N/A 442/(7) N/A LIMITED WARRANTY Annovi Reverberi (A.R.)
More informationHydra-Cell T80 Series Pumps Design Advantages
Hydra-Cell T80 Series Pumps Design Advantages An Economical and Environmental Choice Hydra-Cell is a positive displacement, multiple-diaphragm pump featuring a seal-less design that provides full containment
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP B-Series pumps are a good choice for a variety of recirculating, mixing, and transfer applications. Typical pumped liquids include solvents, resins, and petroleum products. These pumps are
More informationTECHNICAL BROCHURE BAC2000. Series 2000 Closed Coupled. Series 2000 Frame Mounted. Series A-C 2000 SINGLE STAGE END SUCTION
TECHNICAL BROCHURE BAC0 Series 0 Closed Coupled Series 0 Frame Mounted Series A-C 0 SINGLE STAGE END SUCTION Series A-C 0 End Suction Close Coupled - Model 0 APPLICATIONS General Industry Water Supply
More informationEVOTRON SAN WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA
EVOTRON SAN TECNICAL DATA Operating range: from, -, m3/h with head of up to metres. Pumped liquid temperature range: from - C to + C. Working pressure: bar ( kpa). Protection class: IP X. Insulation class:
More informationPlunger Pumps. XW Series Pumps NORTH AMERICA. Description. Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information.
More informationArimitsu Pumps offers an extensive product range HP 392 GPM 24,000 PSI
Arimitsu Pumps offers an extensive product range 2-400 HP 392 GPM 24,000 PSI Improve Productivity Fast & Simple Maintenance Increase Reliability of Operations Control Energy Consumption/ Cost arimitsupumps.com
More informationSafety Certifications
Safety Certifications Mi-T-M builds safe, reliable products. In the U.S., UL and CSA International is accredited by the Occupational Health and Safety Administration (OSHA) as a Nationally Recognized Testing
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP The Heavy Duty S-Series pumps are designed to handle a wide variety of liquids and are particularly suitable for bulk transfer applications where long life and dependable service is required.
More informationPACK SMART RIDE OVER STANDARD PERFORMANCE
PACK SMART RIDE OVER STANDARD PERFORMANCE MADE IN ITALY PACK SMART RIDING OVER STANDARD PERFORMANCE WHEREVER RELIABILITY AND EFFICIENCY ARE REQUESTED Pack Smart is the best expression of integration and
More informationCamlocks. Snaplock Camlock Couplings. The original Snaplock quick release coupling. Applications
Snaplock Camlock Couplings The original Snaplock quick release coupling The tried & trusted cam coupling with the high reputation of the Snaplock brand name offering additional features to our standard
More informationFMC Technologies Bean piston pumps are unsurpassed within the vertical drilling markets.
FMC BEAN FMC Technologies Bean piston pumps are unsurpassed within the vertical drilling markets. WATER esigned for continuous duty applications, the FMC Technologies Bean piston line increases drilling
More informationBEST PRODUCTS, BEST LOCAL SUPPORT MONGOOSE 184 Series The Mongoose Model 184 jetter is one of Sewer Equipment brand s best-selling units. With reliable features such as a tubular steel frame, corrosion
More informationF/G-20 Series. Up to 1.0 gpm (3.8 l/min) f/g-20 hydra-cell diaphragm pump
f/g-20 hydra-cell diaphragm pump F/G-20 Series Up to 1.0 gpm (3.8 l/min) F/G-22 with Pump/Motor Adapter for coupling to NEMA C-Face and IEC B5 Flange motors F/G-20 hollow shaft for close coupling with
More informationCLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM
CLARK SOLUTIONS S Series Rotary Gear Pump Pressure to 200 PSI, Flow to 32 GPM, Drive Speed to 1800 RPM DESCRIPTION Series S pumps are general purpose positive displacement gear pumps and are a good choice
More informationHydracel High Pressure Pump
Hydracel High Pressure Pump Mfg: Hydracell Model: D10 SL SE SHEHC Stock No. HDPH038.5a Serial No. 99260 Hydracell High pressure Pump. Model D10 SL SE SHEHC, S/N 99260. Inlet (1) 1-1/2 in., Outlet (1) 1
More informationD/G-10 Series. Up to 8 gpm (30.3 l/min) D/g-10 hydra-cell diaphragm pump. D/G-10 Specialized Designs
D/g-1 hydra-cell diaphragm pump D/G-1 Series Up to 8 gpm (3.3 l/min) D/G-1 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G1 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 13 bar (15 psi) for Metallic Pump Heads 24 bar (35 psi) for Non-metallic Pump Heads API 674 ATEX G1 with Cast Iron pump head G1 with
More information- CONSTRUCTIONS 300 SECTIONAL VIEW DRAWING 300 SECTIONAL VIEW TABLE 301 BEARINGS 302 MECHANICAL SEAL 303 FITTINGS 304
CONTENTS 1 Page - SPECIFICATIONS 200 PERFORMANCE RANGE and SELECTION CHART 201 TYPE KEY and CURVES SPECIFICATIONS 202 PERFORMANCE CURVES 32-250/7.56 203 PERFORMANCE CURVES 32-250/9.26 203 PERFORMANCE CURVES
More informationHydraulic gear pumps and motors
PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
More informationCut off saw - Starter assy and engine
Cut off saw - Starter assy and engine Copyright Comet USA, Inc. 1/9/2015 1-13 Cut off saw - Starter assy and engine Ref.Nu Qty Part number Description Validity from Validity till Notes Bulletin 1 4 097000092AR
More informationart. 499 art. 502 art. 503 Quick closing cap with toungues for loading mouths Features Complete of fuel resistent gasket
art. 499 Quick closing cap with toungues for loading mouths 04990201Aluminium made DN 3" art. 502 Complete of fuel resistent gasket Quick closing cap with handle for loading mouths 05020101 Brass DN 2"
More informationPowrFlow PVX Vane Pumps
PowrFlow PVX Vane Pumps POWRFLOW PVX VANE PUMPS YOUR SOURCE FOR VANE PUMPS FOR THE MOST DEMANDING APPLICATIONS What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane
More informationIntermediate elements with flow regulator on P line
Intermediate elements with flow regulator on P line TI-04- - RE 18301-27 Edition: 02.2016 Replaces: 06.2015 Technical data General Weight TI-04-00-AL kg (lbs) 0.74 (1.63) Weight TI-04-01-AL kg (lbs) 0.84
More informationTECHNICAL CATALOGUE BALL VALVES: PARIS
TECHNICAL CATALOGUE BALL VALVES: PARIS TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds
More informationABSOLUTE QUALITY EXCELLENCE ON A HUMAN SCALE
ABSOLUTE QUALITY EXCELLENCE ON A HUMAN SCALE The characteristics of Dieci products can be summarized in three concepts that have always been the hallmark of each vehicle: technology, reliability and durability.
More informationModels: D-03, G-03, G-13 and M-03
Parts Manual D03-991-2402C Models: D-03, G-03, G-13 and M-03 Kel-Cell and Standard Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date
More informationHOT WATER PRESSURE WASHER BREAKDOWN
HOUR METER TACH / HOUR ON OFF THERMOSTAT BURNER OFF 29 9 20 28 25 4 23 24 3 2 34 33 0 5 8 9 7 6 6 ITEM PART NUMBER DESCRIPTION QTY. 85.600.220 Frame 2 N/A Engine, 3 HP, 389cc (GX390 2QNR) 2 85.578.50 Engine,
More informationEXPERTS IN DEWATERING SOLUTIONS
EXPERTS IN DEWATERING SOLUTIONS SIMPLY AHEAD Atlantic Pumps bring a simple commitment to dewatering solutions we respond to your needs ahead of your expectations. Whether it s enquiries or deliveries,
More informationCatalog PowrFlowTM PVX Vane Pumps
Catalog PowrFlowTM PVX Vane Pumps Your source for vane pumps for the most demanding applications. What Makes PowrFlow PVX Vane Pumps Your Best Buy? Continental Hydraulics PowrFlow PVX Vane Pumps deliver
More informationROLLER PUMPS. Hypro Roller Pumps. Max RPM. Max PSI Series - 6 Roller Pump Series - 5 Roller Pump Series - 4 Roller Pump
ROLLER Hypro Roller Pumps GPM PSI RPM 1502C 62 150 1000 1502N 62 150 1000 1502XL 62 150 1000 1700C 45 200 1000 1700N 45 200 1000 1700XL 45 200 1000 4001C-A 9 150 1800 1500 Series - 6 Roller Pump Cast-iron
More informationAir cooled Diesel engines kw
Air cooled Diesel engines 2.7-8.8 kw 15 LD, the most complete family of single cylinder air cooled engines, comprises 5 model s in the power r ange 2.7 to 8.8 k W. Particularly suited to small agricultur
More informationTHE INNOVATIVE TEAM IN POWER TRANSMISSION
S m a l l WONDER THE INNOVATIVE TEAM IN POWER TRANSMISSION 2 1 2 The output shaft is constructed from quality C40 steel for maximum output torque. The corrosion-resistant aluminum surface cools easily
More informationPeacock Industrial Supply 2017 Part # OEM Kit # Description Premier Partner Net
Foam Lance CDR.0873-P Foam Lance, Brass $ 29.95 Kits Fitting AR Pumps ZX.0865 1815 Head ring kit (3 ea) $ 4.05 ZX.0685 1828 KIT 1828 CHECK VALVE KIT XR $ 18.73 ZX.0864 1829 Head Ring kit (3 ea) $ 7.20
More informationT100 Series Low Pressure Models T100E, T100F & T100H
T100 Series Low Pressure Models T100E, T100F & T100H Maximum Flow Rate: Maximum Pressure: 366 l/min (96 gpm) 145 bar (2100 psi) API 674 T100 Series low pressure model with Stainless Steel pump head Available
More informationABSOLUTE QUALITY EXCELLENCE ON A HUMAN SCALE
ABSOLUTE QUALITY EXCELLENCE ON A HUMAN SCALE The characteristics of Dieci products can be summarized in three concepts that have always been the hallmark of each vehicle: technology, reliability and durability.
More informationG25 Series API bar (350 psi) for Non-metallic Pump Heads. G25 with Cast Iron pump head
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationmodel # Order # Xpert-HD 2.3/23 p / DD Xpert-HD 2.5/27 p / DD PD
Service MANUAL model # Order # Xpert-HD 2.3/23 p / DD-232336 1.107-103.0 Xpert-HD 2.3/23 p / DD-232337 1.107-104.0 Xpert-HD 2.5/27 p / DD-252737 1.107-106.0 PD3-23326 1.107-091.0 PD3-23327 1.107-092.0
More informationMONOBLOC CENTRIFUGAL ELECTRIC PUMP IN COMPLIANCE WITH EN 733 in cast iron
Cast iron monobloc centrifugal electric pumps in compliance with EN 733. APPLICATIONS Moving clean water for civil, agricultural, industrial use, pressure boosting units, heating and air conditioning plants
More informationSERIES: VLS. INTERCHANGE: With similar couplings MAIN APPLICATIONS. Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant
INTERCHANGE: With similar couplings MAIN APPLICATIONS Mobile construction equipment Drilling rigs Vehicle/Trailer Industrial plant VLS series is the screw to connect coupling with poppet style valving,
More informationFeatures and Description of Edward Univalve Globe Valves
Features and Description of Edward Univalve Globe Valves 7. 8. 9. 1 10. 2. 11. 12. 3. 4. 5. 6. 1. Stem has ACME threads, is ground to a fine finish and is hardened to resist wear. 2. Yoke bushing material
More informationTABLE OF CONTENTS DESCRIPTION PAGE
TABLE OF CONTENTS DESCRIPTION PAGE BLOCK-HOOK COMBO...2 ROTARY SWIVEL...3 ROTARY TABLE...4 MKP STYLE SSW-40...5 MKF SERIES TRIPLEX MUD PUMPS... 6-8 MKP-165...9 MKP-275 TRIPLEX MUD PUMP...10 MKP-550 TRIPLEX
More informationINDUSTRIAL range. Oil-free Scroll Compressors. Belt driven, fix or variable speed kw (3-30 HP) 10/2013
INDUSTRIAL range OS Oil-free Scroll Compressors Belt driven, fix or variable speed 2.2-22 kw (3-30 HP) GB 10/2013 Company Profile FINI boasts more than 60 years of experience and it is one of the most
More informationH/G-25 Series. Up to 20 gpm (75.7/min) H/G-25 Specialized Designs
H/G-25 Series Up to 2 gpm (75.7/min) H/G-25 Specialized Designs Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 8 for complete specifications. The H-25
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationModel descriptions. Technical data. Pressure and Temperature Limits Models 19, 20, 20P: -60 to 406 F Models 19M, 20M, 20MP:
VALVES & CONTROLS KUNKLE SAFETY AND RELIEF PRODUCTS Non-code Bronze Liquid Relief Valves Model descriptions Model 20 Model 19: All bronze, equipped with handwheel for easy adjustment within spring ranges.
More informationTECHNICAL CATALOGUE DISTRIBUTION MANIFOLDS
TECHNICAL CATALOGUE DISTRIBUTION TEC ITAP SpA, founded in Lumezzane (Brescia) in 972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for plumbing
More informationVertical multi-stage pumps
MK Vertical multi-stage pumps PERFORMANCE RANGE Flow rate up to 180 l/min (10.8 m³/h) Head up to 103 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +40 C Ambient
More informationG10 Series API bar (350 psi) for Non-metallic Pump Heads. G10 with Cast Iron pump head
G10 Series Maximum Flow Rate: Maximum Pressure: 33.4 l/min (8.8 gpm) 103 bar (1500 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G10 with Cast Iron pump head G10
More informationPankl Engine Systems. Pankl Engine Systems A member of Pankl Racing Systems.
Pankl Engine Systems Pankl Engine Systems A member of Pankl Racing Systems Kaltschmidstrasse 2-6 8600 Bruck an der Mur, Austria T: +43 (0) 3862 51250 0 F: +43 (0) 3862 51250 290 email: engine@pankl.com
More informationfranklinwater.com 50 Hz VR SERIES Vertical Multi-Stage Pumps
franklinwater.com 5 Hz VR SERIES Vertical Multi-Stage Pumps 5 HZ VR SERIES VERTICAL MULTI-STAGE PUMPS Features 2 Applications 2 Pump Specifications Counter-Flange Kits Motor Specifications 4 Ordering
More informationAir cooled Diesel engines kw
Air cooled Diesel engines 2.7-8.8 kw KD15 / 15 LD, the most complete family of single cylinder air cooled engines, comprises 5 models in the power range 2.7 to 8.8 kw. Particularly suited to small agricultur
More informationFittings threads: metric (M5), BSP (G1/8, G1/4, G3/8, G1/2, G3/4, G1), BSPT (R1/8, R1/4, R3/8, R1/2, R3/4, R1)
> Series 2000 pipe fittings Series 2000 pipe fittings Fittings threads: metric (M5), BSP (G1/8, G1/, G3/8, G1/2, G3/, G1), BSPT (R1/8, R1/, R3/8, R1/2, R3/, R1) The wide range of Camozzi pipe fittings,
More informationAP250HP Gear Pumps. Single and multiple cast iron gear pumps. Reference: 200-P EN-01 1/46. Issue:
Gear Pumps Single and multiple cast iron gear pumps Reference: 200-P-991234-EN-01 Issue: 05.2016 1/46 Contents Page 1 General information... 3 1.1 External gear pumps components and construction / benefits...
More informationEconomizer pressure Reducing valves
Economizer pressure Reducing valves Cryogenic valves Gauge valves In 1954 Leopoldo Boscarol set up the Milanese company that still today bears his name, immediately making his mark in the sector for the
More informationWe Are the Worldwide Provider for All Your Valve and Fitting Needs
Product Catalog We Are the Worldwide Provider for All Your Valve and Fitting Needs C&C strives to earn your business by offering an extensive line of high quality products with a proven track record for
More informationVeljan Gear Pumps. E' Series Features:-
E' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 43.5cc/rev to 146.5cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 38.7gpm High strength
More informationCOMPANY PROFILE. PressureJet Systems Pvt. Ltd.
(In Technical Collaboration With Leuco S.p.A.-Italy & Hughes Pumps Ltd.-U.K.) COMPANY PROFILE PressureJet Systems Pvt. Ltd. PressureJet is a leading manufacturer of high pressure, positive displacement,
More informationLubrication equipment
Made In Italy Lubrication equipment PRODUCTS CATALOGUE GREASE DISTRIBUTION page 2 OIL DISTRIBUTION page 38 EXHAUSTED OIL ASPIRATORS page 112 TROLLEYS FOR DRUMS TRANSPORT page 118 OIL DRAIN UNITS page 134
More informationAP212HP Cast Iron Gear Pumps
Cast Iron Gear Pumps Standard and Low Noise series Reference: 200-P-991236-EN-01 Issue: 09.2016 1/56 Contents Page 1 General information... 5 1.1 External gear pumps components... 6 1.2 Technical data...
More informationGear Housing Widths 1.00" 1.25" 1.50" 1.75" 2.00" 2.25" 2.50" Gear Housing Widths / Flow Rate [ VGP - D Series ]
'D' Series Features:- Heavy duty sleeve bushing design in a small frame size Displacements from 20.6cc/rev to 104.2cc/rev Working pressures up to 240bar Speeds up to 3500rpm Flows up to 27.5gpm High strength
More informationINTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
More information2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space
STANDARD CAPacity 1400 Series 1400 Series heavy duty, quality hose reel engineered to save space 1400 Series* Holds up to 40 of 1/2 Hose For 1/4, and 1/2 I.D. Hose Swivel inlet: 1/2 NPSM Low pressure 1/2
More informationG03 Mono-Block Series
G03 Mono-Block Series Maximum Flow Rate: 11.7 l/min (3.1 gpm) Maximum Pressure: 103 bar (1500 psi) for Metallic Pump Heads ATEX Mono-Block (G03) Shaft-driven with Stainless Steel pump head Mono-Block (G03)
More informationSTRIKERTM SERIES STRIKER-3 HIGH PRESSURE 3-STAGE FIRE PUMP. Features and Benefits. Applications DATA SHEET
DATA SHEET STRIKERTM SERIES STRIKER-3 HIGH PRESSURE 3-STAGE FIRE PUMP The WATERAX STRIKER-3 also known as ULTRASTRIKER pump, pairs a reliable 3-stage pump end with the Honda 4-stroke 13 HP engine to achieve
More informationGENESI: the birth of a new generation of professional spray guns that are distinguished for their reliability and precision. Conceived from the FX
GENESI GENESI: the birth of a new generation of professional spray guns that are distinguished for their reliability and precision. Conceived from the FX experience, or 15 years of intense work in the
More informationwith you, together, globally PRODUCTION PROGRAM
with you, together, globally PRODUCTION PROGRAM About us with you, together, globally FFG Europe is a holding company conceived to integrate high-tech European machine tool manufacturers, leaders in technological
More informationTECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
More informationPiston Compressors. Desde 1.958
Piston Compressors www.compresoresjosval.com Desde 1.958 In 1958, before the huge growth experienced by the transport sector and as a result of working with the repair of brakes, JOSVAL was born. An initiative
More informationAIRTOOLS. Ratchets 256. Impact tools 257. Screwdrivers 261. Drills 262. Hammers 263. Sanders and grinders 264. Special tools 266.
254 Ratchets 256 Impact tools 257 Screwdrivers 261 Drills 262 Hammers 263 Sanders and inders 264 Special tools 266 Blow guns 268 Hose reels 269 Air line accessories 270 Hoses 273 255 USAG airtools comply
More information69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads
G25 Series Maximum Flow Rate: Maximum Pressure: 76 l/min (20.0 gpm) 69 bar (1000 psi) for Metallic Pump Heads 24 bar (350 psi) for Non-metallic Pump Heads API 674 ATEX G25 with Cast Iron pump head G25
More informationCONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS
CONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM LPV PUMPS FEATURES AND BENEFITS The LPV line of Variable
More informationTECHNICAL BROCHURE B5-33GB R4 5GB, 7GB, 10GB, 18GB, 25GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP
TECHNICAL BROCHURE B-33GB R4 GB, 7GB, GB, 1GB, 2GB, 33GB HIGH PRESSURE MULTI-STAGE BOOSTER PUMP FEATURES Multi-stage Design: Provides steady, quiet, vibration free, operation. applications. O-Ring Casing
More informationBSM ROTARY GEAR PUMPS
FT. MTD. PUMP BSM bronze pumps are ideal for use where corrosion resistant materials are required such as providing circulation on water-jacketed engines, pumping saline solutions as well as a variety
More informationQUICK COUPLINGS DHI. ver. 0001
QUICK COUPLINGS DHI www.manuli-hydraulics.com Q.SAFE DHI INTRODUCTION MQS-DHI DIRECT HOSE INTEGRATION An innovative system to enable direct assembly of the quick-release coupling to the flexible hose,
More information2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
More information(%$5$ PUMPS EUROPE S.p.A. &(175,)8*$/38036':2. &217(176 50Hz
&(175,)8*$/38036':2 &217(176 50Hz Page 63(&,),&$7,216 200 SELECTION CHART 201 PERFORMANCE CHART 150 202 PERFORMANCE CHART 200 203 PERFORMANCE CHART 300 204 PERFORMANCE CHART 400 205 &216758&7,216 300 SECTIONAL
More informationDuctile Iron, Jacketed Pumps: Catalog Section 1602 Cast Iron, Non-Jacketed Pumps: Catalog Section 1401 HL4126A
Page 1601.1 TABLE OF CONTENTS Features & Benefits...2 Port Location Options...2 Model Number Key...3 Standard Materials of Construction...3 Cutaway View & Pump Features...4 Special Materials & Options
More informationCP-506B-PL. Series HSCS. Horizontal Split Case Pumps. Replacement Parts
Series HSCS Horizontal Split Case Pumps Replacement Parts PARTS List CP-506B-PL PARTS LIST CP-505-PL Index Description Page No. Exploded View....3 Parts List for 6x10x22, 8x12x22M, 8x12x22L, 8x12x27, and
More information