TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing

Size: px
Start display at page:

Download "TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing"

Transcription

1

2 TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit free space within the working area by guiding the belts over an upper installed deflection unit open and close of upper grinding belt hoods by pneumatic cylinder accident protection by movable grinding belt cover tension of each grinding belt by pneumatic belt tension device the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw frequency converter with brake chopper unit for braking in max. 10 s grinding belt speed v = 4-25 m/s emergency-off release line in the working area with a sliding table of aluminum-pipe installed between the machine stands table movement back and forward by means of 4 soft prism rolls max. workpiece weight 100 kg motorized table height adjustment on roller guidings max. 480 mm drive by a gear motor with P = 0,55 kw, speed v = 0,5 1,5 m/min pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls dust extraction tube on the left hand machine stand with D = 200 mm necessary extraction power = approx m 3 /h

3 TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing ZBS 1 * Table dimension 2000 x 800 mm, grinding belt 100 x 7100 mm equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit free space within the working area by guiding the belts over an upper installed deflection unit open and close of upper grinding belt hoods by pneumatic cylinder accident ZBS protection 2 by * movable Table grinding dimension belt cover 3000 x 1000 mm, grinding belt 100 x 9000 mm tension of each grinding belt by pneumatic belt tension device the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw frequency converter with brake chopper unit for braking in max. 10 s grinding ZBS belt speed 3 v = * 4 -Table 25 m/s dimension 4000 x 1000 mm, grinding belt 100 x mm emergency-off release line in the working area with a sliding table of aluminum-pipe installed between the machine stands table movement back and forward by means of 4 soft prism rolls ZBS 4 * Table dimension 5000 x 1000 mm, grinding belt 100 x mm max. workpiece weight 100 kg motorized table height adjustment on roller guidings max. 480 mm drive by a gear motor with P = 0,55 kw, speed v = 0,5 1,5 m/min pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking * The usable working width does not correspond to the given table size. screw, softy guiding on prism rolls dust extraction tube on the left hand machine stand with D = 200 mm necessary extraction power = approx m 3 /h

4

5 Handling device(1) Contact rollers (2) Foot switch pedal

6 INFINITELY WORKPIECE HANDLING DEVICE easy unit movement by u- shaped table frame on 4 prism rollers bearing mounted at the table frame for arrangement of a turn mandrel of an aluminum-pipe CONTACT secure stop DRUM by a disc PRESSURE brake, brake PIECE, torque required 30 danmfor by stainless spring power steel loosing of the brake pneumatically by a foot switch soft sliding on prism rolls turn mandrel with integrated workpiece swivel device with secure stop in 0 /22,5 /45 /67,5 axial movement and 90 position on ball by guides a pneumatic activated bolt additional pendulous turning ring suspension with 90 stopsof contact drum control by control foot pedal of pendulum activated valves motion through two adjustable pressure springs secure workpiece rectangular clamping run by to 4 sanding adjustable belt vacuum adjustable suction with plates set located screws at the swivel device suction plates equipped controlled with by quick foot switch change pedal device for contact drum tube vacuum unit with 10 m contact drum 3 /h vacuum capacity tube D = 100 mm, d = 40 mm, L = 130 mm PARKING SYSTEM contact FOR drum MACHINE tube TABLES with rubber hardness 45 shore storage rack for two sliding tables Handlingseinrichtung to store two sliding tables (1) positioned behind the machine Kontaktwalzen- Druckstück (2) Fußschalter

7 CONTACT DRUM PRESSURE PIECE, required for stainless steel soft sliding on prism rolls axial movement on ball guides pendulous suspension of contact drum control of pendulum motion through two adjustable pressure springs rectangular run to sanding belt adjustable with set screws equipped with quick change device for contact drum tube contact drum tube D = 100 mm, d = 40 mm, L = 130 mm contact drum tube with rubber hardness 45 shore Handlingseinrichtung (1) Kontaktwalzen- Druckstück (2) Fußschalter

8

9 Easy change of the belt

10 Flexible belt tension at low pressure

11 Exact belt running

12 Flexible belt speed and quick stop

13 automatic tool

14 Werkzeug Automatik AUTOMATIC TOOL with a linear guiding at the traverse on which the pressure tool runs drive of the pressure tool by a frequency controlled gear motor with P = 0,25 kw and a toothed belt connection between the tool and the toothed belt can be released for manual work with an electro pneumatically controlled sliding unit to change between the two belts automatically with an electro pneumatically controlled vertical unit for the automatically working and release motion of the tool adjustment of the working pressure by a proportional valve tool carrier with a quick changing device for the pressure tool including the contact drum Ø 100 x 130 mm control of the working and release motion by a SIMATIC S7 PLC energy connection by a drag chain system the movable belt guard is not applicable (Automatic tool only in connection with the automatically reciprocating table movement or with a driven scissors lift table) AUTOMATICALLY RECIPROCATING TABLE MOVEMENT drive of the table by a frequency controlled gear motor with P = 0,18 kw synchronously driven via tooth belt drive speed variable from 0,5 4,0 m/min. drive path controlled by PLC with coupling for disengaging the drive (manual operation)

15 Werkzeug Automatik HYDRAULIC SCISSORS LIFT TABLE movable by hand AUTOMATIC TOOL platform 1000 x 2500 mm with a linear guiding at the traverse on which the pressure tool runs load 1500 kg drive of the pressure tool by a frequency controlled gear motor with P = 0,25 kw and a toothed belt lift 1000 mm connection between the tool and the toothed belt can be released for manual work with integrated hydraulic aggregate P = 1,5 kw with an electro pneumatically controlled sliding unit to change between the two belts automatically with circulated safety contact bar with an electro pneumatically controlled vertical unit for the automatically working and release motion of the tool with a steel pipe frame with wooden stripes onto the scissors lift table adjustment of the working pressure by a proportional valve with round guiding rails positioned at the lift table to hold the sliding table or handling devices tool carrier with a quick changing device for the pressure tool scissors lift table on a drive carrier with 4 flanged wheels including the contact drum Ø 100 x 130 mm with two 3 m long rails, which need to be bolted onto the ground control of the working and release motion by a SIMATIC S7 PLC (ground plates / bridges need to be supplied by the customer) energy connection by a drag chain system the movable belt guard is not applicable DRIVE FOR SCISSORS LIFT TABLE for automatic movement (Automatic tool only in connection with the automatically reciprocating table movement or with a driven scissors lift table) carrier designed for a total load of 5000 dan drive by servo controlled gear motor with P = 0,37 kw AUTOMATICALLY RECIPROCATING TABLE MOVEMENT drive speed v = 0,1-8 m/min. drive of the table by a frequency controlled gear motor with P = 0,18 kw power supply of the scissors lift table and the drive through a wire chain synchronously driven via tooth belt push buttons and speed control in the operator panel drive speed variable from 0,5 4,0 m/min. limit positions with safety switches drive path controlled by PLC drive 1800 mm with coupling for disengaging the drive (manual operation) with dust slides controlled by a SIMATIC S7 PLC

16 Control

17 Steuerung PROGRAMMABLE CONTROLLER necessary at tool or table automatic SIMATIC S7 PLC with an operator panel OP17 to store the data like pressure, speeds, part sizes and grinding passes with a hand held device for the set up

18

19

20

21 RITTAL Osma Aufzüge Rexroth Neff Rolls Royce Hörmann Bosch Siemens Weber Trumpf BASF Franke Nederland General Electric Gaggenau Industrie S.A.S Metalbud Sp. z o.o. All further references can be found on the disk

www.kuhlmeyer.de PORTAL-BELT-GRINDING MACHINE TYPE PBM with a right and a left machine stand equipped with adjustable hollow screws M30 for the tightening on the ground each stand with a vertical support

More information

USED Year 2006 Homag DET (Homag FL 20/07/25) for Sizing and Contour Shaping of Solid Wood Doors

USED Year 2006 Homag DET (Homag FL 20/07/25) for Sizing and Contour Shaping of Solid Wood Doors TECHNICAL SPECIFICATIONS MS 96217 PAGE 1 USED Year 2006 Homag DET (Homag FL 20/07/25) for Sizing and Contour Shaping of Solid Wood Doors The Homag/Torwegge base construction features many technological

More information

Coating systems. Subject to change. Krautzberger GmbH /

Coating systems. Subject to change. Krautzberger GmbH / 185 Automatic rotary R 700 indexing units Automatic rotary indexing unit R 700 The Krautzberger R 700 automatic rotary indexing unit is designed for the coating of serial components. Output is designed

More information

ALFRA PRESS - overview

ALFRA PRESS - overview 70 ALFRA PRESS 71 ALFRA PRESS - overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 74 Page 78 Control cabinet housing, Control cabinet doors, Mounting panels Control cabinet housing, Control cabinet doors,

More information

Ball Rail Systems RE / The Drive & Control Company

Ball Rail Systems RE / The Drive & Control Company Ball Rail Systems RE 82 202/2002-12 The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems

More information

Cut-to-size saw fh6 430 / 160 Auto load

Cut-to-size saw fh6 430 / 160 Auto load Cut-to-size saw fh6 430 / 160 Auto load Automatic infeed Drawing number: fh6 430/160 Machine number: Delivery date: TBD TBD Project based requirements, machine type fh6 Name: Information Working pressure:

More information

SECTIONAL WARPING MACHINE SERVOMECH-100

SECTIONAL WARPING MACHINE SERVOMECH-100 SPECIFICATIONS SECTIONAL WARPING MACHINE SERVOMECH-100 1.0 TECHNICAL SPECIFICATIONS: WORKING WIDTH : 2200mm to 3600 mm DRUM TYPE : Metallic Drum, Dynamically Balanced DRUM CONE HEIGHT : Fixed - 11 0 or

More information

FRONT GENERAL A X L E

FRONT GENERAL A X L E GENERAL General diagram of braking circuits 30 FRONT AXLE GENERAL Tightening torques (in dan.m) 30 FRONT AXLE GENERAL Tightening torques (in dan.m) 30 REAR AXLE GENERAL Tightening torques (in dan.m) 30

More information

Hoisting Equipment Rack & Pinion jacks

Hoisting Equipment Rack & Pinion jacks Ratchet jack model Yaletaurus 10000 Mechanical ratchet jacks with lifting claw are designed for operation in confined areas where space below the load is restricted, thus preventing the use of traditional

More information

Multi-Purpose Milling Machine

Multi-Purpose Milling Machine Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,

More information

ELECTRIC WIRE ROPE HOIST and TROLLEY RHN SERIES

ELECTRIC WIRE ROPE HOIST and TROLLEY RHN SERIES EFFECTIVE: October 21, 2011 ELECTRIC WIRE ROPE HOIST and TROLLEY RHN SERIES 2 Ton through 20 Ton Capacity Hoist Code and Serial Number This equipment should not be installed, operated or maintained by

More information

Product overview. Phone Fax

Product overview.   Phone Fax Product overview Arneburger Str. 37n 39590 Tangermünde Germany tangermuende@minda.de Phone +49 39322 996-0 Fax +49 39322 996-66 MINDA Tangermünde Your expert for complex solutions For more than two decades,

More information

MAINTENANCE INSTRUCTIONS

MAINTENANCE INSTRUCTIONS MAINTENANCE INSTRUCTIONS ECOMAT EASY / GIROTEC WRS Version G0101 ECOMAT EASY H / GIROTEC WRS H Version G0301 ECOMAT PLUS / ECOMAT PLUS H Versions G0503 / G0603 V 2.0 Table of contents 1/3 1.0 Maintenance

More information

UNIVERTOR A. Pick-up-turning centre. The systems supplier for manufacturing technology from one source

UNIVERTOR A. Pick-up-turning centre. The systems supplier for manufacturing technology from one source The systems supplier for manufacturing technology from one source A flexible pick-up turning system for small, medium and large-volume production UNIVERTOR A Pick-up-turning centre Pick-up-turning procedure

More information

SPECIFICATIONS SECTIONAL WARPING MACHINE - PLCTECH-110

SPECIFICATIONS SECTIONAL WARPING MACHINE - PLCTECH-110 SPECIFICATIONS SECTIONAL WARPING MACHINE - PLCTECH-110 1.0 TECHNICAL SPECIFICATIONS: WORKING WIDTH : 2200mm to 4000 mm DRUM TYPE : Metallic Drum, Dynamically Balanced. CONE HEIGHT : Fixed,( 11% or 9% or

More information

TECHNICAL DESCRIPTION. Mobile Crushing Plant, Type REMAX 300 on Crawler Chassis (with screen module 12/30-1)

TECHNICAL DESCRIPTION. Mobile Crushing Plant, Type REMAX 300 on Crawler Chassis (with screen module 12/30-1) TECHNICAL DESCRIPTION Mobile Crushing Plant, Type REMAX 300 on Crawler Chassis (with screen module 12/30-1) to dimension sheet No. 42 1534 49 A. General technical data 001 Application Feed material: Throughput

More information

Assembly Products. View Assembly Products at: LINEAR ACTUATORS AND MODULAR UNITS FOR YOUR APPLICATION

Assembly Products. View Assembly Products at:  LINEAR ACTUATORS AND MODULAR UNITS FOR YOUR APPLICATION Assembly Products LINEAR ACTUATORS AND MODULAR UNITS FOR YOUR APPLICATION View Assembly Products at: www.clrh.com (636) 386-8022 www.clrh.com Drive, Assembly and Handling Technology Linear Actuators n

More information

Technical specification. Electric cold milling machine W 350 E

Technical specification. Electric cold milling machine W 350 E Technical specification Electric cold milling machine W 350 E Technical specification Milling width max. Milling depth* 1 Milling drum Tool spacing Electric cold milling machine W 350 E 350 mm 0 100 mm

More information

PROFIMAT MT. Profile grinding with increased profitability. More than Precision

PROFIMAT MT. Profile grinding with increased profitability. More than Precision PROFIMAT MT Profile grinding with increased profitability More than Precision PROFIMAT MT Universal state of the art grinding technology for profile grinding applications The multi-talent in profile grinding

More information

EASY-MASTER PRO-MASTER DYNESTIC 7515 / G DYNESTIC The perfect nesting technology CNC machining centers Your Partner for Precision

EASY-MASTER PRO-MASTER DYNESTIC 7515 / G DYNESTIC The perfect nesting technology CNC machining centers Your Partner for Precision EASY-MASTER PRO-MASTER DYNESTIC 7515 / 7516 7521 G DYNESTIC 7515 7516 The perfect nesting technology CNC machining centers Your Partner for Precision and Productivity Spezialmaschinen DYNESTIC 7515 7516

More information

STRINGING EQUIPMENT CATALOGUE

STRINGING EQUIPMENT CATALOGUE Antenna Construc on Winches for li ing and passenger li ing STRINGING EQUIPMENT CATALOGUE PULLER FOR LIFTING PASSENGERS Model: SPW 2,5 - P Bull wheel Puller with integrated reel winder switchable between

More information

3 WIDE BELT SANDERS WIDE BELT SANDERS

3 WIDE BELT SANDERS WIDE BELT SANDERS /EN Buldog 3 /5/7 WIDE WIDE BELT BELT SANDERS 2 WORKING UNIT Buldog 3 Wide belt sander Buldog 3 R 650 C 650 R 950 C 950 R 1100 C 1100 RR 650 RC 650 RR 950 RC 950 RR 1100 RC 1100 Max. working width mm 650

More information

Small Footprint Big Cutting Capacity

Small Footprint Big Cutting Capacity Just what you need! Small Footprint Big Cutting Capacity 1000 Y Axis Travel FOCUS SEIKI CORP No.11, Lane 181, Da Ming Road, Shengang Dist.,Taichung City, 42949 Taiwan Tel: +886-4-2529-5611 Fax:+886-4-2529-5613

More information

CATALOG 2017

CATALOG 2017 www.hpschou.com CATALOG 2017 PRESENTS A RANGE OF TOOLS Introducing the new Probuilder Power-tool concept The new Probuilder concept, one 18 V lithium battery platform for all Power-tools, designed for

More information

Valve Lapping Tool Attachment. Valve / Valve Spring Tools / Jacks / Axle Stands. 27-piece Valve Seat Cutter Set, mm

Valve Lapping Tool Attachment. Valve / Valve Spring Tools / Jacks / Axle Stands. 27-piece Valve Seat Cutter Set, mm Valve Lapping Tool Attachment - facilitates the insertion of valves - automatic change in direction - for use with fine grinding paste - with 8 mm shank - working speed min. 1000 rpm, max. 1250 rpm - 2

More information

CoA. Constant Face Drivers. Constant Face Drivers CoA

CoA. Constant Face Drivers. Constant Face Drivers CoA CoA Constant Face Drivers CoA - hydraulic pressure compensation provides a uniform clamping force also on uneven faces of workpieces - approx. value for an axially admitted total load of the 3 supporting

More information

[ means: Standing up to any challenge. FAMUP MC and MCP. Vertical CNC machining centers with and without pallet changer

[ means: Standing up to any challenge. FAMUP MC and MCP. Vertical CNC machining centers with and without pallet changer [ E[M]CONOMY] means: Standing up to any challenge. FAMUP MC and MCP Vertical CNC machining centers with and without pallet changer MC 120-60 and MC 75-50 The EMCO FAMUP MC series. One of the most advanced

More information

FASGM 5025 FASGM 6030 FASGM 7530 FASGM 10030

FASGM 5025 FASGM 6030 FASGM 7530 FASGM 10030 SERIES 5025 6030 7530 10030 BRIEF DESCRIPTION series machine MODELS are Fully Automatic High Precision Surface grinding machines which are further sub-categorized into 2 different MODELs i.e. 3-Axes &

More information

SRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators. Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1.

SRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators.  Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1. SRU-mini Sizes 8 14 Weight 0.15 kg 0.65 kg Torque 0.16 Nm 1.15 Nm Axial force 255 N 330 N Bending moment 2.5 Nm 4.5 Nm Application example Reversing unit for the economical reorientation of cylindrical

More information

10.5 gal. Vertical Oil Lubricated Air Compressor

10.5 gal. Vertical Oil Lubricated Air Compressor 10.5 gal. Vertical Oil Lubricated Air Compressor Model No. AC1104 Tank volume: 10.5 gal. (40 L) Direct drive Oil-lubricated single cylinder pump for durability and long life triple the pump life of comparable

More information

Cam roller guide LF6S complete axis

Cam roller guide LF6S complete axis Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto

More information

Miniature Ball Rail Systems

Miniature Ball Rail Systems R310EN 2210 (2004.06) The Drive & Control Company 2 Bosch Rexroth AG Linear Motion and Assembly Technologies Miniature-BRS R310EN 2210 (2004.06) Linear Motion Systems Ball Rail System Standard Ball Rail

More information

JONES & SHIPMAN ULTRAMAT Touchscreen controlled, `Easy` or full CNC, Universal Cylindrical Grinders

JONES & SHIPMAN ULTRAMAT Touchscreen controlled, `Easy` or full CNC, Universal Cylindrical Grinders GRINDING JONES & SHIPMAN ULTRAMAT Touchscreen controlled, `Easy` or full CNC, Universal Cylindrical Grinders www.jonesshipman.com Touchscreen controlled Easy or full CNC cylindrical grinding machines ULTRAM

More information

Flexible. Modular. Compact. Beta Universal Linear Module

Flexible. Modular. Compact. Beta Universal Linear Module Beta Flexible. Modular. Compact. Beta Universal Linear Module Universal linear module with optional toothed belt or spindle drive and various guiding options. Field of Application Universal linear module

More information

Clausing Precision Manual Surface Grinders

Clausing Precision Manual Surface Grinders Clausing Precision Manual Surface Grinders Precision Manual Surface Grinders with Table Sizes: 6" x 18" & 8" x 18" Standard Features... High precision cartridge spindle Anti-wear guide ways coated with

More information

Bending and Shearing

Bending and Shearing Bending and Shearing Contents 4 The company 6 Why Boschert Gizelis? Contents 8-11 G BEND Bending 4 The company 12-15 G MASTER Bending 6 Why Boschert Gizelis? 16-19 G HD Bending 8-11 G PRO - Bending 20-23

More information

PRELIMINARY. 92 kw. 16 t. Telescopic crawler crane. 24 m. Tier IV emission standards

PRELIMINARY. 92 kw. 16 t. Telescopic crawler crane. 24 m. Tier IV emission standards 9 kw 1 t Telescopic crawler crane m Tier IV emission standards Advanced. The E-Series What makes up the E-Series 197: TX telescopic crane Over 5 years of experience in construction and building of highly

More information

INDEX. PAGE Adjustment mechanism for radial position of block on rotating

INDEX. PAGE Adjustment mechanism for radial position of block on rotating INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,

More information

Manual Monorail Track System

Manual Monorail Track System www.wampfler.com Page 1/57 www.wampfler.com Page 2/57 1 General...6 1.1 Use of standard elements...7 1.2 Determination of the permissible support centers...9 1.3 Questionnaire...11 1.4 Project notes...12

More information

DRUM STANDS & TRAILERS STRINGING EQUIPMENT CATALOGUE

DRUM STANDS & TRAILERS STRINGING EQUIPMENT CATALOGUE DRUM STANDS & TRAILERS STRINGING EQUIPMENT CATALOGUE DRUM STAND Model: TB Z 246 / TB Z 249 / TB Z 550 Drum stand with hydraulic drive unit suitable for drums up to Ø 3.000 mm; Drum weight: 8.000 kg up

More information

Aluminum Rod. LLZ Electric. Continuous Casting and Rolling line

Aluminum Rod. LLZ Electric. Continuous Casting and Rolling line Pure Aluminum Rod LLZ-15-1600 Electric Aluminum Rod Continuous Casting and Rolling line Technical Specification Foshan Metech Aluminum Technology CO., LTD Office address: 2 nd Floor, E1 building, Jiulong

More information

CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company

CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology

More information

SP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001

SP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001 SP / LP SERIES Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191

More information

Bending and Shearing

Bending and Shearing Bending and Shearing Contents 4 The company 6 Why Boschert Gizelis? 8-11 G PRO - Bending 12-15 G BEND - Bending 16-19 G MASTER - Bending 20-23 G HD - Bending 26-27 Tooling 28-33 G CUT - Shearing 34 Product

More information

Driver Driven. InputSpeed. Gears

Driver Driven. InputSpeed. Gears Gears Gears are toothed wheels designed to transmit rotary motion and power from one part of a mechanism to another. They are fitted to shafts with special devices called keys (or splines) that ensure

More information

MEGA5 Series Bridge Type 5-Axis Machining Centers

MEGA5 Series Bridge Type 5-Axis Machining Centers Series ridge Type 5-xis Machining enters WE MEHNTRONI O., LT. HEQURTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FX : +886-3-588-5194 Website :

More information

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings

More information

Precision Modules PSK. The Drive & Control Company

Precision Modules PSK. The Drive & Control Company Precision Modules PSK The Drive & Control Company 2 Bosch Rexroth Coporation Precision Modules PSK R310A 2414 (2008.07) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear

More information

Simultaneous 5-axis vertical machining centres FLEXI

Simultaneous 5-axis vertical machining centres FLEXI FLEXI An innovative project at the top of technology. New FLEXI vertical machining centres, with movable worktable and 5 simultaneous axes, have an universal field of application and they are conceived

More information

JTW-SERIES MACHINE SCREW JACK

JTW-SERIES MACHINE SCREW JACK J A C TO N I N D U S T RY C O., LT D L I F T I N G S Y S T E M S S O L U T I O N S TEL: 86-769-81585810, 81585852 SKYPE: jactonjack EMAIL: sales@screwactuator.com WEB: www.screwactuator.com SERIES MACHINE

More information

An ISO 9001 : 2008 Certified Company

An ISO 9001 : 2008 Certified Company ::: ELECTRO MECHANICAL TWO POST CAR LIFT ::: :: Model :- TPL 300 :: Electric motor Distance between column Width of base Max. length long arms Min. length long arms Max. length short arms Min. length short

More information

Linear Motion Technology Handbook. The Drive & Control Company

Linear Motion Technology Handbook. The Drive & Control Company Linear Motion Technology Handbook The Drive & Control Company 1-2 Bosch Rexroth AG Linear Motion Technology Handbook R310EN 2017 (2006.07) Linear Motion and Assembly Technologies www.boschrexroth.com/brl

More information

EJP SERIES Right-angle Worm

EJP SERIES Right-angle Worm EJP SERIES T he EJP series is ideal for demanding applications requiring high efficiency, torsional rigidity and zero backlash. It s lightweight, black anodized aluminum housing and dual input/output seals

More information

TADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m

TADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245 mm Overall width

More information

TADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA

TADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA SPEC. SHEET No. GR-7E-1-214/EU-51 DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-7EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY BOOM 7, kg at 3. m 5-section, 11.5 m 44. m DIMENSION Overall

More information

HYTECH ENGINEERING & SERVICES

HYTECH ENGINEERING & SERVICES Products About us Hytech Engineering & Services specializes in the operations and maintenance, modifications, procurement, development, and manufacturing of customized hydraulic and automated products

More information

Bending, punching, shearing & plasma cutting

Bending, punching, shearing & plasma cutting Atlantic Blue Line Bending, punching, shearing & plasma cutting ATP, ATS, ATT, ATPL Atlantic Blue Line Sheet Metal WWW.HACO.COM For Impressive Performances 1 High level of technology, for competitive prices

More information

Bending, punching, shearing & plasma cutting

Bending, punching, shearing & plasma cutting Atlantic Blue Line Bending, punching, shearing & plasma cutting ATP, ATS, ATT, ATPL Atlantic Blue Line Sheet Metal WWW.HACO.COM For Impressive Performances 1 High level of technology, for competitive prices

More information

The Original Open Center Ring Indexer

The Original Open Center Ring Indexer The Original Open Center Ring Indexer We manufacture high-precision aluminum and steel plates (anodize and nickelplated upon request). All of your equipment can be supplied from one source including an

More information

Parts list ErgoStrap 600E Frame - Cutter - Strap lifter

Parts list ErgoStrap 600E Frame - Cutter - Strap lifter Parts list ErgoStrap 600E Frame - Cutter - Strap lifter Item Quantity Unit Designation Art. No. 1.1 1 ea. Frame with storage compartment (without attachement parts) 600 E 600332 1.2 2 ea. Large wheels

More information

CP3650 Series CP AB & CP AB Angle Sanders

CP3650 Series CP AB & CP AB Angle Sanders 32 CP3650-20AB CP3650-075AB rpm CP3650-20AB 2000 CP3650-075AB 7500 Index No. Parts No. Description Qty Index No. Parts No. Description Qty 653967390 Adaptater 6 654300330 Inlet 7 656452290 Disc Spring

More information

WPP 15 T - Hydraulic table shop press with manual pump and mobile cylinder for professional use

WPP 15 T - Hydraulic table shop press with manual pump and mobile cylinder for professional use Hydraulic shop presses WPP 15 T - Hydraulic table shop press with manual pump and mobile cylinder for professional use For all repair and assembly works, e.g.: Straightening Robust frame with perforation

More information

TADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m

TADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m DATE July, 2006 TADANO TRUCK CRANE MODEL : TL-300E Provisional Specifications GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5 m 33.0 m DIMENSION MASS Overall length approx. 12,670 mm

More information

BOSCHERT COMPACT. Punching Nibbling Forming Marking. simply better!

BOSCHERT COMPACT. Punching Nibbling Forming Marking. simply better! COMPACT Punching Nibbling Forming Marking simply better! With more than 50 years experience we can guarantee the Boschert quality users worldwide have come to expect. COMPACT The Compact punching machine

More information

TADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA

TADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-55EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length Overall width Overall

More information

Cable Pulling Winches kn KW 1002 KW 2002 KW 3002

Cable Pulling Winches kn KW 1002 KW 2002 KW 3002 Winches Chapter 1 Cable Pulling Winches 10-30 kn KW 1002 KW 2002 KW 3002 Cable Laying Machinery Pipe Renewal Winches Asphalt Recycler Accessories The winches of this series are ideal for seasonal contracts

More information

Radial piston motor for frame integrated drives MCR-A

Radial piston motor for frame integrated drives MCR-A Radial piston motor for frame integrated drives MCR-A RE 15195 Edition: 12.2013 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530

More information

Military. U.S. Army U.S. Navy U.S. Air Force U.S. Marines U.S. Coast Guard U.S. Department of Defense. We offer a wide range of Machinery

Military. U.S. Army U.S. Navy U.S. Air Force U.S. Marines U.S. Coast Guard U.S. Department of Defense. We offer a wide range of Machinery PROVIDING SOLUTIONS SINCE 1968 Aircraft & Space Honeywell Aerospace Boeing Company Hughes Aircraft Lockheed Aircraft NASA Northrop Grumman Rockwell Internantional BAE Systems Space X Raytheon Rolls - Royce

More information

Machines from the MULTIMATIC series are used all over the world. They are distinguished by their wide range of possibilities for use, high weight

Machines from the MULTIMATIC series are used all over the world. They are distinguished by their wide range of possibilities for use, high weight 44 Dough Dividing & Moulding Machine Machines from the MULTIMATIC series are used all over the world. They are distinguished by their wide range of possibilities for use, high weight precision, solid design,

More information

BSS Plate shears for sheet metals, paper and other material with collapsible substructure. Circular shears / Sheet metal shears

BSS Plate shears for sheet metals, paper and other material with collapsible substructure. Circular shears / Sheet metal shears Cutting Circular shears / Sheet metal shears New KS 1 - Manual circular shear to cut arcs of a circle in steel up to 1.0 mm KS 2 - Motor-driven circular shear to cut arcs of a circle in steel up to 2.0

More information

Electric Lifting Cylinder TV / KV 5 XE Load up to N

Electric Lifting Cylinder TV / KV 5 XE Load up to N S+R S+R automation systems GmbH Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N Lifting Moving Positioning Design and functuion An electric lifting cylinder is an electro-mechanical drive unit.

More information

8710 EN. Potentiometric Displacement Sensors. Models 8710, 8711

8710 EN. Potentiometric Displacement Sensors. Models 8710, 8711 Potentiometric Displacement Sensors Models 8710, 8711 Code: Delivery: Warranty: 8710 EN ex stock 24 months Model 8711 Model 8710 Application Displacement sensors models 8710 and 8711 with resistance tracks

More information

Electric Power Tools Created :05 Revised :08 Page 1

Electric Power Tools Created :05 Revised :08 Page 1 2005 Created 01.08.2005 11:05 Revised 02.08.2005 10:08 Page 1 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric

More information

Section 5 Transverse Conveyors

Section 5 Transverse Conveyors 8981 00 22 11/07 TS4plus inear Motion and Assembly Technologies Bosch Rexroth Corp. -1 Section Transverse Conveyors BS4 are designed to transfer pallets for short transport distances (e.g. between two

More information

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281

More information

APIESSE FEEDER FOR BIOGAS PLANTS

APIESSE FEEDER FOR BIOGAS PLANTS PIESSE FEEDER FOR IOGS PLNTS - Description of the iogas Feeder WEIGHING, MIXING, DOSING, FEEDING of substrates, organic solids and fluids into a biogas digester grass silage maize silage sugar beets chopped

More information

Die changing technique

Die changing technique Die changing Die changing 8 Contents Product group 8 Roller bar, hydraulically lifted for heavy loads (400 bar), lifting of the complete roller bar for medium loads (120 bar), lifting of individual rollers

More information

VW-18 OPTIONAL POWER TILT ADJUSTABLE CANTED HEAD

VW-18 OPTIONAL POWER TILT ADJUSTABLE CANTED HEAD VERTICAL BAND SAWS VW-18 Photos may show optional equipment. OPTIONAL POWER TILT Allows the operator to enter a desired angle up to 60 in either direction and have the machine automatically move the head

More information

ROUGH TERRAIN CRANE GR-500N

ROUGH TERRAIN CRANE GR-500N ROUGH TERRAIN CRANE GR-500N JAPANESE SPECIFICATIONS GR OUTLINE 6-section Boom, 2-staged Full Auto Jib X-type Outrigger SPEC. NO. GR-500N-1-00101 Control No. GR-500N-1-00101 / JA-03-1 - Return to index

More information

Štiribatna vgradna dvigala. KOCH, SERVISNA OPREMA, d.o.o. Špruha 42, SI-1236 Trzin. Tel.: Fax:

Štiribatna vgradna dvigala. KOCH, SERVISNA OPREMA, d.o.o. Špruha 42, SI-1236 Trzin. Tel.: Fax: 2018-2019 VGRADNA Product Catalogue INGROUND DVIGALA 2017 2018 Štiribatna vgradna dvigala KOCH, SERVISNA OPREMA, d.o.o. Špruha 42, SI-1236 Trzin prodaja@koch.si Tel.: +386 1 56 44 770 Fax: +386 1 56 44

More information

All From One Source Hydraulic Closed Loop Control Systems for Gas and Steam Turbines

All From One Source Hydraulic Closed Loop Control Systems for Gas and Steam Turbines All From One Source Hydraulic Closed Loop Control Systems for Gas and Steam Turbines 1 Introduction All From One Source Hydraulic Closed Loop Control Systems for Gas and Steam Turbines ensuring maximum

More information

ROUGH TERRAIN CRANE TR-500M

ROUGH TERRAIN CRANE TR-500M ROUGH TERRAIN CRANE TR-500M JAPANESE SPECIFICATIONS TR OUTLINE 6-section Boom, 2-staged Power Tilt Jib H-type Outrigger SPEC. NO. TR-500M-3-00113 Control No. JA-02 327 TR-500M CRANE SPECIFICATIONS CRANE

More information

Precise, flexible, efficient automation solutions for the semiconductor industry

Precise, flexible, efficient automation solutions for the semiconductor industry Precise, flexible, efficient automation solutions for the semiconductor industry 3 Wafer Handling High rigidity, no overshoot, no backlash: Rexroth wafer handling solutions are designed for perfect balance

More information

PLM series Permanent load lifting magnets

PLM series Permanent load lifting magnets Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever

More information

Clamping and braking systems

Clamping and braking systems Clamping and braking systems COMPANY PROFILE HI-TECH SOLUTIONS! Year of founding: 1995 Number of employees: 300 2 production halls, 3 divisions Total production area: 8000m 2 Smart solutions: KAIZEN, 5S

More information

To, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION

To, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION Page - 1 To, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION Dear Sir, We are pleased to enclose our offer for the following machines :- Draw Bench Semi Duty Twin HP 30 RPM 1500 (60' X

More information

The controllableollable Torque Limiting Clutch for

The controllableollable Torque Limiting Clutch for The controllableollable Torque Limiting Clutch for Filling Machinery Printing Machinery Packaging Machinery Conveyors and Materials Handling Equipment pneumatic or electromagnetic clutch Controllable during

More information

MEBAeco. Ready-made. individuality.

MEBAeco. Ready-made. individuality. MEBAeco Ready-made individuality. MEBA Likeable. Flexible. Qualified. +49 (0) 7333-9644 -0 +49 (0) 7333-9644 -44 info@meba-saw.de www.meba-saw.de MEBA Metall- Bandsägemaschinen GmbH Lindenstraße 6-8 D-72589

More information

w w w. j y o t i. c o. i n Performance Series Vertical Machining Center

w w w. j y o t i. c o. i n Performance Series Vertical Machining Center w w w. j y o t i. c o. i n Performance Series Vertical Machining Center Performance Series Vertical Machining Center Overview To match the demand of greater accuracy and total reliability at higher speeds

More information

Product overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.

Product overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837. Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular

More information

Original Spare parts. for SpriMag and aisa internal COating MaChineS and OvenS

Original Spare parts. for SpriMag and aisa internal COating MaChineS and OvenS Original Spare parts for SpriMag and aisa internal COating MaChineS and OvenS INDEX 1 Index 1 Index 2 Paint Supply and Spraying Technology 2.1 Paint Supply 2.1.1 Pressure Pot 2.1.2 Paint Filter and Accessories

More information

BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing

BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing Cost Effective, High Performance Vertical Machining Centers BARON-MAX V Range

More information

Flexible. Light. Productive. LEG Long-stroke Gripper

Flexible. Light. Productive. LEG Long-stroke Gripper LEG Flexible. Light. Productive. LEG Long-stroke Gripper Light long-stroke gripper for flexible and highly dynamic handling of various components Field of Application For use in a clean working environment,

More information

DEUTROFLUX UWE Universal Stationary Magnetic Particle Crack Detectors

DEUTROFLUX UWE Universal Stationary Magnetic Particle Crack Detectors DEUTROFLUX UWE Universal Stationary Magnetic Particle Crack Detectors Reliable testing for cracks in all directions Optionally with Memory II: Operation via Siemens Touch Panel with parameter memory (e.

More information

ROUGH TERRAIN CRANE GR-250N

ROUGH TERRAIN CRANE GR-250N ROUGH TERRAIN CRANE GR-250N JAPANESE SPECIFICATIONS GR OUTLINE 4-section Boom, 2-staged Standard Jib X-type Outrigger SPEC. NO. GR-250N-1-00103 Control No. GR-250N-1-00103 / JA-04-1 - GR-250N CRANE SPECIFICATIONS

More information

Housing Freewheels for Multimotor Drives 80.1

Housing Freewheels for Multimotor Drives 80.1 s for Multimotor Drives 80.1 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg s FKhG for Multimotor Drives for automatic connecting and disconnecting of drives on pumps, fans, generators etc.

More information

Work Professional with professional machines

Work Professional with professional machines QUTATION Computer Panel Saw Date : 2015/04/02 Specialized in Panel Saw from SOSN Model : SOSN-338 Computer Panel Saw 338 means Length of cutting.cutting length is 3800 mm Machine Specification : CAPACITY

More information

FAMUP MC and MCP. Vertical CNC machining centers with and without pallet changer.

FAMUP MC and MCP. Vertical CNC machining centers with and without pallet changer. EMCO FAMUP CNC machining centers Vertical milling centers FAMUP MC-Line/MCX-Line With integrated pallet changer FAMUP MCP-Line Vertical milling machines FAMUP MMV-Line EMCO, the industrial systems supplier

More information

Series SSG - Compressing & stretching device for the Use in the workshop and construction zone

Series SSG - Compressing & stretching device for the Use in the workshop and construction zone Compressing and stretching devices Series SSG - Compressing & stretching device for the Use in the workshop and construction zone To manufacture wheel arches, window frames, rain profiles or door edges

More information

CDI Revision Notes Term 1 ( ) Grade 12 Advanced Unit 2 Mechanical Systems

CDI Revision Notes Term 1 ( ) Grade 12 Advanced Unit 2 Mechanical Systems CDI Revision Notes Term 1 (2017 2018) Grade 12 Advanced Unit 2 Mechanical Systems STUDENT INSTRUCTIONS Student must attempt all questions. For this examination, you must have: (a) An ink pen blue. (b)

More information