Hydraulics. Technical Information /Technische Information / Segni/Informacion Tecnica. Low Speed High Torque Hydraulic Motors TF Series

Transcription

1 Technical Information /Technische Information / Segni/Informacion Tecnica 11 Displacements ( in 3 /rev) 11 Schluckvolumen cm 3 /rev 11 Cylindrée 11 Despazamientos Cont. Int. Maximum Pressure (to 3 psi) (to 4 psi) Eingangsdruck bar bar Pression entrée Presion Maxima Tough Motor for Tough pplications Sturdy construction throughout makes Parker s motors suitable for the most severe applications. The powertrain uses patented 6:4 spline geometry for strength. ll splines are constantly flushed with cool fluid for durability. Roller vanes and sealed commutation assure high volumetric efficiency, smooth low speed operation and extended life. Shaft seals can withstand full system pressure and are washed in cool fluid for long life. Maximum Oil Flow Schluckstrom Débit d huile Caudal Maximo de ceite Maximum Speed Drehzahl Vitesse de rotation Velocidad Maxima (to 25 gpm) lpm (749 rpm) 749 rpm Cont. Int. Maximum Torque (627 lb in) (816 lb in) MaxDrehmoment 681 Nm 916 Nm Couple Torque Maximo Maximumg Side Load at Key Seitenlast Charges latèrales Carga Maxima Lateral (to 3597 lb) N C9

2 Performance Data / Leistungsdaten Puissance / Datos Tecnicos Motor Series TF Geometric displacement Geom. Schluckvolumen Cylindrée Cilindrata Max. Max. intermittent flow Max. Drehzahl Intermittierender etrieb: Vitesse de rotation maxi Velocidad maxima a caudal intermitente maximo Max. oil flow Max. Schluckstrom Débit d huile maxi Portata max cm 3 /rev in 3 /rev rev/min cont / int* l/min g/min cont / int* bar psi Max. differential pressure Max. Druckgefälle Chute de pression maxi Presion diferencial maxima max bar psi Max. supply pressure Max. Eingangsdruck Pression maxi entrée Presion maxima de alimentacion cont / int* Nm lb-in Max. torque Max. Drehmoment Couple maxi Torque Maximo max KW HP cont / int* Nm lb-in Max. performance Max. Leistungabgabe Puissance de sortie maxi Maximo rendimiento Min. starting torque Min. nlaufmoment Couple min. fourni au dé manrage Torque minimo de arranque C TF TF TF TF TF TF TF TF TF TF 365 Clutch TF TF Performance data based on testing using 1W4 oil with a viscosity of 43.1 cst (2 S) at 54 C (13 F.) Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnes sur les performances sont basees sur des tests utilisant de l'huile 1W4 d'une viscosite de 2 S a 54 o C (13 o F). Ces donnees correspondent a des situations typiques. Les donnes reelles peuvent varier legerement d'un moteur de production a l'autre. Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 o C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 o C (13 o F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. * Intermittent operation rating applies to 1% of every minute. Intermittierende Werte maximal 1% von jeder etriebsminute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. C91

3 Performance Data / Leistungsdaten Puissance / Datos Tecnicos TF 8 Drehmoment [Nm] Schluckstrom [L/min] TF 1 Drehzahl [1/min] Schluckstrom [L/min] bar Flow [G/min] Torque [lb/in] Speed [Rpm] Flow [G/min] psi Drehmoment [Nm] Drehzahl [1/min] TF 13 Schluckstrom [L/min] bar Torque [lb/in] Speed [Rpm] Flow [G/min] psi Drehmoment [Nm] Drehzahl [1/min] Cont. Int. bar Torque [lb/in] Speed [Rpm] psi Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Leistugsdaten sind gemessen mit SE 1W4 bei einer Viskositat von 43,1 Cst beo 54 C. Geringfugige bweichungen von den Katalogerten sond moglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. C92

4 Performance Data / Leistungsdaten Puissance / Datos Tecnicos TF Schluckstrom [L/min] Flow [G/min] Drehmoment [Nm] Drehmoment [Nm] Drehzahl [1/min] TF 17 Schluckstrom [L/min] Drehzahl [1/min] bar bar Torque [lb/in] Torque [lb/in] Speed [Rpm] Flow [G/min] Speed [Rpm] 25 2 psi 15 psi C TF Schluckstrom [L/min] Flow [G/min] Drehmoment [Nm] Drehzahl [1/min] Cont. Int. 1 bar Torque [lb/in] Speed [Rpm] psi Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Leistugsdaten sind gemessen mit SE 1W4 bei einer Viskositat von 43,1 Cst beo 54 C. Geringfugige bweichungen von den Katalogerten sond moglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. C93

5 Performance Data / Leistungsdaten Puissance / Datos Tecnicos TF 24 Drehmoment [Nm] Schluckstrom [L/min] TF 28 8 Drehzahl [1/min] Schluckstrom [L/min] bar Torque [lb/in] Flow [G/min] Speed [Rpm] Flow [G/min] psi Drehmoment [Nm] Drehzahl [1/min] bar 1 7 Torque [lb/in] Speed [Rpm] psi TF 36 Schluckstrom [L/min] Flow [G/min] Drehmoment [Nm] Drehzahl [1/min] Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre bar Torque [lb/in] Speed [Rpm] Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Leistugsdaten sind gemessen mit SE 1W4 bei einer Viskositat von 43,1 Cst beo 54 C. Geringfugige bweichungen von den Katalogerten sond moglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. psi C94

6 Performance Data / Leistungsdaten Puissance / Datos Tecnicos TF 45 9 Schluckstrom [L/min] Flow [G/min] Drehmoment [Nm] Drehmoment [Nm] TF 475 Drehmoment [Nm] Drehzahl [1/min] Schluckstrom [L/min] Drehzahl [1/min] TF 365 Clutch Motor Schluckstrom [L/min] Cont. Drehzahl [1/min] Int Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre bar bar bar Torque [lb/in] Torque [lb/in] Torque [lb/in] Flow [G/min] Flow [G/min] Speed [Rpm] Speed [Rpm] Speed [Rpm] Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Leistugsdaten sind gemessen mit SE 1W4 bei einer Viskositat von 43,1 Cst beo 54 C. Geringfugige bweichungen von den Katalogerten sond moglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 5 psi psi psi C C95

7 Radial Load / Radiale Wellenbelastung Charges Radiale / Carga Radial Flange Mount / Standardgehäuse Monture à bride(s) / Montaje de brida Side Load - N (lbs) (8) Wheel Mount / Radnabengehäuse Monture à roue / Montaje de rueda Side Load - N (lbs) (8) (6) (6) (4) (4) 8896 (2) 8896 (2) (-3) (-2) (-1) () 25.4 (1) 5.8 (2) 76.2 (3) 11.6 (4) Distance from Mounting Face - mm (in) 25.4 (1) 5.8 (2) 76.2 (3) 11.6 (4) (5) (6) Distance from Mounting Face - mm (in) The allowable side load curve is based on uni-directional steady state loads for L 1 bearing life at 3 x 1 6 revolutions. Die zulässige auslegbare radiale Wellenbelastungskurve ist unter ruhenden, einseitig statisch gerichteten Lastverhältnissen auf eine L 1 Lebensdauer mit 3 x 1 6 Umdrehungen kalkuliert. La courbe de charge latérale permise se base sur des charges unidirectionnelles en régime permanent pour le roulement L 1 à 3 x 1 6 révolutions. La curva de valores admisibles de carga lateral está basada en cargas constantes para cojinetes L 1 a 3 x 1 6 revoluciones. Equation to Calculate the Expected Radial earing Life Gelichung zur Ermittlung der Lagerlebensdauer Equation to calculate the allowable side load "for a given load : estimmung der erlaubten radialen Wellenbelastung mit vorgegebener Last Use F a, F b and S in equation to determine hours of L 1 bearing life. Die Lebensdauer in Stunden ergibt sich durch einsetzen von F a, F b, und S in die nachstehende Formel. L = 3 x 1 6 { F a } x S F b Where / Mit: S = Shaft Speed RPM / btriebswellendrehzahl in min -1 L = Life In Hours / Lebensdauer in Stunden F a = llowable side load defined by above curve at a distance from mounting flange. / Erlaubte radiale Wellenbelastung als Function der Laenge F b = pplication side load. / nwendungsseitige Wellenbelastung Note: Calculations are based on L 1 bearing life per ISO 281. uslegung basiert auf einer L 1 Lenbendauer nach ISO 281. C96

8 Mounting / Gehäuse Carter / Montaje Code: SE 2-olt "L" 64.3 (2.53) 15.7 (.62) 2.7 (.11) 16.4 (4.188) ø129.5 (5.1) Max ø (3.25) 82.5 (3.248) (2.483) (5.25) ø13.48 (17/32) C Code disp Weight/Gewicht kg Poids/Peso (lb) (29.9) (3.) (3.5) (3.7) (31.3) (31.9) (32.9) (33.5) (35.2) (36.4) (37.9) Length "L" mm "L" (in) (7.51) (7.51) (7.63) (7.7) (7.82) (7.95) (8.13) (8.32) (8.7) (8.87) (9.2) Code: SE 2-olt "L" 57.7 (2.27) 15.7 (.62) 65.3 (2.57) 9.4 (.37) ø (9/16) 146. (5.75) (6.87) ø (5.1) Max ø 11.6 (4.) (3.998) 62.8 (2.47) Code disp Weight/Gewicht kg Poids/Peso (lb) (31.3) (31.4) (31.9) (32.1) (32.7) (33.3) (34.3) (34.9) (36.6) (37.8) (39.3) Length "L" mm "L" (in) (7.25) (7.25) (7.37) (7.44) (7.56) (7.69) (7.87) (8.6) (8.44) (8.6) (8.94) C97

9 Mounting / Gehäuse Carter / Montaje Code: D Large Wheel Mount 22.5 (.885) "L" 15.9 (.62) 1.7 (.42) (1.69) 45 ø126.6 (4.984) ø 127. (5.) (4.998) 4X (5.757) 9/16 ø (6.375) Code D disp Weight/Gewicht kg Poids/Peso lb Length "L" mm "L" (in) (6.81) (6.81) (6.91) (7.4) (7.17) (7.29) (7.48) (7.67) (7.91) (8.21) (8.54) Code: E 6 Hole, Long Pilot 59 (2.32) 7.36 (.29) 62.8 (2.473) 16 (.629) ø126.6 (4.984) ø (3.25) 82.5 (3.248) (5.25) "L" 16.4 (4.188) ø13.5 (.531) ø95 (3.74) Code E disp Weight/Gewicht kg Poids/Peso (lb) (29.9) (3.) (3.5) (3.7) (31.3) (31.9) (32.9) (33.5) (35.2) (36.4) (37.9) Length "L" mm "L" (in) (7.32) (7.32) (7.44) (7.51) (7.63) (7.76) (7.95) (8.11) (8.46) (8.66) (9.2) C98

10 Mounting / Gehäuse Carter / Montaje Code: H Wheel, Machine Nose 4.1 (.16) Min 36.8 (1.45) 46.7 (1.84) 19.1 (.75) 6.6 ø / 127. (.26) (4.996 / 5.) ø (3.25) 82.5 (3.248) 64.7 (2.55) 45 ø126.6 (4.984) ø74.98 (2.952) 135. (5.314) "L" (5.812) (17/32) C Code H disp Weight/Gewicht kg Poids/Peso (lb) (3.9) (3.9) (31.2) (31.5) (32.1) (32.9) (33.7) (34.4) (35.9) (37.5) (38.6) Length "L" mm "L" (in) (5.73) (5.73) (5.85) (5.92) (6.4) (6.17) (6.35) (6.54) (6.92) (7.8) (7.42) Code: L Wheel, Front rake Nose "L" 4.1 (.16) Min 36.8 (1.45) 19.1 (.75) 46.7 (1.84) 64.7 (2.55) 45 ø 76.2 (3.) ø 127. / (5. / 4.996) ø (4.984) ø (3.498) 88.8 (3.496) o/ 135. (5.314) (5.812) (17/32) 4 x 5/16-18 UNC Code L disp Weight/Gewicht kg Poids/Peso (lb) (3.9) (3.9) (31.2) (31.5) (32.1) (32.9) (33.7) (34.4) (35.9) (37.5) (38.6) Length "L" mm "L" (in) (5.73) (5.73) (5.85) (5.92) (6.4) (6.17) (6.35) (6.54) (6.92) (7.8) (7.42) C99

11 Mounting / Gehäuse Carter / Montaje Code: M Magneto "L" 64.3 (2.53) 15.7 (.62) 2.7 (.11) (2.483) ø129.5 (5.1) Max ø (3.25) 82.5 (3.248) 16.4 (4.188) ø13.48 (17/32) (5.25) Code M disp Weight/Gewicht kg Poids/Peso (lb) (29.9) (3.) (3.5) (3.7) (31.3) (31.9) (32.9) (33.5) (35.2) (36.4) (37.9) Length "L" mm "L" (in) (7.51) (7.51) (7.63) (7.7) (7.82) (7.95) (8.13) (8.32) (8.7) (8.87) (9.2) Code: U Wheel, Standard "L" 36.8 (1.45) 4.1 (.16) Min 19.1 (.75) 46.7 (1.84) 39.9 (1.57) 6.6 (.26) 64.7 (2.55) 45 ø (3.25) 82.5 (3.248) ø 127. / (5. / 4.996) ø (2.48) 135 (5.314) ø (4.984) (5.812) ø (17/32) Code U disp Weight/Gewicht kg Poids/Peso (lb) (3.6) (3.7) (31.2) (31.5) (32.) (32.7) (33.6) (34.2) (35.9) (37.2) (38.6) Length "L" mm "L" (in) (5.73) (5.73) (5.85) (5.92) (6.4) (6.17) (6.35) (6.54) (6.92) (7.8) (7.42) C1

12 Mounting / Gehäuse Carter / Montaje Code: V SE "" 4 olt 65.6 (2.582) 22.5 (.885) 16.3 (.643) 6.4 (.25) ø16.4 (4.188) ø129.5 (5.1) Max ø (3.25) 82.5 (3.248) "L" ø13.48 (17/32) 15 (4.133) C Code V disp Weight/Gewicht kg Poids/Peso (lb) Length "L" mm "L" (in) Code: W Wheel, Optional 22.3 (.88) "L" 19.1 (.75) 4.8 (.19) Min (1.74) 8.9 (.35) (5.812) 45 ø (4.984) ø (4.25) (4.245) 135 (5.314) ø 127. / (5. / 4.996) ø (17/32) Code W disp Weight/Gewicht kg Poids/Peso lb Length "L" mm "L" in C11

13 Ports / nschlüße Orifices / Lumbreras Code: N Manifold, M8 M8x (2.5) 45.7 (1.8) 28.6 (1.13) - O-Ring Ø18x2 NR 8 Ø 22 (.866) M16x (.55) >12 (.47) Motor with manifold mount is supplied with 2 o-rings. Zum Motor mit Universalanschluß werden 2 o-ringe geliefert. Deux joints toriques sont livrés avec les moteurs a plan de raccordement universel. Il blocchetto connessioni é corredato da 2 OR. Code: W G 1/2 G1/2 x 15 Code: V 7/8 O-Ring 7/8-14UNF, O-Ring 5.8 (2.) 5.8 (2.) Code: K Manifold, M6 M6x (2.5) 45.7 (1.8) 26.6 (1.5) - O-Ring Ø12.37x (.91) Ø17.3 (.68) Ø12.7 (.5) Motor with manifold mount is supplied with 2 o-rings. Zum Motor mit Universalanschluß werden 2 o-ringe geliefert. Deux joints toriques sont livrés avec les moteurs a plan de raccordement universel. Il blocchetto connessioni é corredato da 2 OR. C12

14 Ports / nschlüße Orifices / Lumbreras Code: M Manifold 63.5 (2.5) 4 x 5/16-18 UNC thd x.5 min deep (1.25) 45.7 (1.8) (.563) (1.125) - O-Ring Ø12.37x (.91) Ø17.3 (.68) Ø12.7 (.5) Motor with manifold mount is supplied with 2 o-rings. Zum Motor mit Universalanschluß werden 2 o-ringe geliefert. Deux joints toriques sont livrés avec les moteurs a plan de raccordement universel. Il blocchetto connessioni é corredato da 2 OR. Code: S 7/8-14 SE O-Ring C 25.4 (1.) 7/8-14 SE O-Ring Code: H ISO 6149 M22 x (1.) ISO M22 X 1.5 O-RING PORTS C13

15 Rear Ports / Endanschluß limentazione Laterale / Orifices arriér Code: 7/8-14 UNF, xial 4.9 (.19) 7/8-14 UNF, O-Ring 43.2 (1.7) "L" (.972) "W" + 2 kg (4.41 lb) Code: 7/8-14 UNF, Radial (2.58) 22.5 (.88) 7/8-14 UNF, O-Ring (1.8) (.9) "L" (.972) "W" + 2 kg (4.41 lb) Code: E Manifold (2.58) 28.6 (1.13) 22.5 (.88) 4x5/16-18 UNC (1.8) (.9) "L" (.972) "W" + 2 kg (4.41 lb) See pages C97 - C11 for length " L " and Weight " W ". Längen " L " / Gewichte "W" siehe Seite C97...C11. Voir page C97-C11 pour les longueurs "L et les poids "W Consultar en la Página C97-C11 los valores de largo "L y peso "W. C14

16 Rear Ports / Endanschluß limentazione Laterale / Orifices arriér Code: L Manifold, M (2.58) 28.6 (1.13) 22.5 (.88) M16x1.5 M8X (1.8) (.9) Code: X G 1/2, Radial "L" (.972) "W" + 2 kg (4.41 lb) C (2.58) 22.5 (.88) G 1/ (1.8) (.9) "L" (.972) "W" + 2 kg (4.41 lb) Code: Y G 1/2, xial 4.9 (.19) G 1/ (1.7) "L" (.972) "W" + 2 kg (4.41 lb) See pages C97 - C11 for length " L " and Weight " W ". Längen " L " / Gewichte "W" siehe Seite C97...C11. Voir page C97-C11 pour les longueurs "L et les poids "W Consultar en la Página C97-C11 los valores de largo "L y peso "W. C15

17 Shafts / btriebswellen rbre / Ejes Code Code Code V Code M Code: 1 1" 6 Spline 55.3 (2.18) 48.8 (1.92) 52.3 (2.6) Code: 2 1" Keyed 55.3 (2.18) 48.8 (1.92) 52.3 (2.6) Code: 3 1 1/4" Keyed 66.8 (2.63) 6.2 (2.37) 63.8 (2.51) Code: 4 1 Spline 66.8 (2.63) 6.2 (2.37) 63.8 (2.51) C16

18 Shafts / btriebswellen rbre / Ejes Code H Code W Code D Code L Code U Code: 1 1" 6 Spline 94. (3.7) 91.4 (3.6) 89.9 (3.54) C Code: 2 1" Keyed 94. (3.7) 91.4 (3.6) 89.9 (3.54) Code: 3 1 1/4" Keyed 15.4 (4.15) 12.9 (4.5) 11.3 (3.99) Code: 4 1 Spline 15.4 (4.15) 12.9 (4.5) 11.3 (3.99) C17

19 Shafts / btriebswellen rbre / Ejes Code E Code: 1 1" 6 Spline 53.3 (2.1) Code: 2 1" Keyed 53.3 (2.1) Code: 3 1 1/4" Keyed 64.7 (2.55) Code: 4 1 Spline 64.7 (2.55) C18

20 Shafts / btriebswellen rbre / Ejes Code: 1 1" 6 Spline (1.47) 4.3 (.17) 1.24 (.49) 25.4 (1.) Min Full Spline 6.18 / 6.27 (.2435 /.247) / (.848 /.838) / 25.2 (.997 /.985) Code: (1.59) 4.3 (.17) ø (1.1) x 6.38 (.251) wide 6.42 / 6.32 (.2527 /.2487) C 1" Keyed / 28.3 (1.89 / 1.114) 25.4 / (1. /.999) 4.46 / / / 25.4 (.922 /.93) 1.24 (.49) 19. (.748) 1/4-2 UNF Code: 3 1 1/4" Keyed 5.3 (1.98) 36.5 (1.437) x 7.9 (.311) 8.1 / 7.91 (.3155 /.3115) / 1.85 (.448 /.427) 3.49 (1.374) / (1.249 / 1.25) 5/8-18 UNF 19.5 (.75) _ v Code: 4 1 Spline 2.61 / 2.66 (.13 /.15) 3.61 / 3.35 (1.25 / 1.145) / (.192 /.1885) ø / ( / ) / (1.17 / 1.176) ø (1.176) Spline 5/8-18 UNF 19.5 (.75) _ v C19

21 Shafts / btriebswellen rbre / Ejes Code Code Code V Code M Code: 5 1 1/4" 14 Tooth Spline 64. (2.52) 57.4 (2.26) 6.9 (2.4) Code: 6 19 Tooth Spline 68.1 (2.68) 61.5 (2.42) 65. (2.56) Code: 7 15 Tooth Spline 68.3 (2.69) 61.7 (2.43) 65.3 (2.57) Code: 8 1 1/4" Tapered 68.3 (2.69) 61.7 (2.43) 65.3 (2.57) C11

22 Shafts / btriebswellen rbre / Ejes Code H Code W Code D Code L Code U Code: 5 C 1 1/4" 14 Tooth Spline 12.6 (4.4) 1.1 (3.94) 98.6 (3.88) Code: 6 19 Tooth Spline 16.7 (4.2) 14.1 (4.1) 12.6 (4.4) Code: 7 15 Tooth Spline 16.9 (4.21) 14.4 (4.11) 12.9 (4.5) Code: 8 1 1/4" Tapered 16.9 (4.21) 14.4 (4.11) 12.9 (4.5) C111

23 Shafts / btriebswellen rbre / Ejes Code E Code: 5 1 1/4" 14 Tooth Spline 62. (2.44) Code: 6 19 Tooth Spline 66. (2.6) Code: 7 15 Tooth Spline 66.3 (2.61) Code: 8 1 1/4" Tapered 66.3 (2.61) C112

24 Shafts / btriebswellen rbre / Ejes Code: 5 1 1/4" 14 Tooth Spline 47.2 (1.86) 25.4 (1.) Min Full Spline _ 5/8-18 UNF 19.1 (.75) v ø (1.75) 3.18 / 3.32 (.1251 /.139) 31.6 / (1.223 / 1.25) / (1.35 / 1.57) Code: (1.12) 31.1 / (1.221 / 1.233) 27.3 / (1.64 / 1.9) C 19 Tooth Spline / (1.1 / 1.12) 2.31 / 2.49 (.98 /.982) _ v1.31 (.46) Code: (1.55) 1/2-2 _ UNF thd 15.8 (.625) v 25.6 / (.9865 /.9945) 21.8 / (.83 /.84) 15 Tooth Spline 2.31 / 2.49 (.98 /.982) 5/16x1 SE J52 Code: 8 1:8 5 Nm (375 Ft Lb) ø31.88 (1.255) ø31.75 (1.249) 7.96 / 7.94 (.313 /.312) 3.18 (.125) 1 1/4" Tapered 35 (1.37) 1-2UNEF 19 (.748) C113

25 Shafts / btriebswellen rbre / Ejes Code Code Code V Code M Code: 22 25mm Keyed 56.1 (2.21) 49.5 (1.95) 53.1 (2.9) Code: 26 25mm Keyed Stainless Steel 55.3 (2.18) 48.8 (1.92) 52.3 (2.6) Code: Tooth Spline 48. (1.89) 41.4 (1.63) 45. (1.77) Code: 41 Long (2.18) 48.8 (1.92) 52.3 (2.6) C114

26 Shafts / btriebswellen rbre / Ejes Code H Code W Code D Code L Code U Code: 22 25mm Keyed 94.7 (3.73) 92.2 (3.63) 9.7 (3.57) C Code: 26 25mm Keyed Stainless Steel 94. (3.7) 91.4 (3.6) 89.9 (3.54) Code: Tooth Spline 86.6 (3.41) 84.1 (3.31) 82.6 (3.25) Code: 41 Long (3.7) 91.4 (3.6) 89.9 (3.54) C115

27 Shafts / btriebswellen rbre / Ejes Code E Code: 22 25mm Keyed 54.1 (2.13) Code: 26 25mm Keyed Stainless Steel 53.3 (2.1) Code: Tooth Spline 45.9 (1.81) Code: 41 Long (2.1) C116

28 Shafts / btriebswellen rbre / Ejes Code: (.925) 9.9 (.358) 7.1 / 7. (.2796 /.2756) 25mm Keyed / (1.96 / 1.18) 8.64 / 8.38 (.34 /.33) / (.9742 /.9942) _ M6 x (.75) v Code: 26 25mm Keyed Stainless Steel 8x7x32, DIN (.216) 25.2 / (.9843 /.9848) / 28.2 (1.91 / 1.13) 43 (1.692) 28. (1.12) ø (.985) ø 25.2 (.984) 7.96 / 8. (.313 /.315) C M8x16 Code: 28 ø (.715) 14.2 (.56) / (.862 /.872) 13 Tooth Spline 2.64 (.8125) / (.75 /.715) 2.31 / 2.49 (.98 /.982) SE J /32 Spline Code: 41 Long (1.633) 6 SE J499, Standard M8x (1.) 6.27 (.246) 6.19 (.243) ø (.848) ø (.838) 6 ø (.997) ø 25.3 (.996) C117

29 Shafts / btriebswellen rbre / Ejes Code Code Code V Code M Code: Tooth Spline 66.8 (2.63) 6.2 (2.37) 63.8 (2.51) Code: /4" Keyed 66.8 (2.63) 6.2 (2.37) 63.8 (2.51) Code: 46 32mm Keyed 67. (2.64) 6.5 (2.38) 64. (2.52) Code: 47 Woodruff Keyed 55.3 (2.18) 48.8 (1.92) 52.3 (2.6) C118

30 Shafts / btriebswellen rbre / Ejes Code H Code W Code D Code L Code U Code: Tooth Spline 15.4 (4.15) 12.9 (4.5) 11.3 (3.99) C Code: /4" Keyed 15.4 (4.15) 12.9 (4.5) 11.3 (3.99) Code: 46 32mm Keyed 15.7 (4.16) 13.1 (4.6) 11.6 (4.) Code: 47 Woodruff Keyed 94. (3.7) 91.4 (3.6) 89.9 (3.54) C119

31 Shafts / btriebswellen rbre / Ejes Code E Code: Tooth Spline 64.7 (2.55) Code: /4" Keyed 64.7 (2.55) Code: 46 32mm Keyed 65. (2.56) Code: 47 Woodruff Keyed 53.3 (2.1) C12

32 Shafts / btriebswellen rbre / Ejes Code: (2.15) / (1.249 / 1.25) 14 Tooth Spline 41 (1.614) _ M12 x (1.) v / (.1251 /.139) / (1.35 / 1.57) Code: (1.98) 36.5 (1.44) 8.28 (.326) 7.91 (.311) 7.89 (.31) 35.4 (1.39) C 1 1/4" Keyed _ M12 x (1.) v ø (1.25) ø (1.249) 3.1 / 3.3 (1.185 / 1.193) Code: 46 1x8x36, DIN (.334) 35. (1.37) 9.96 / 1. (.392 /.394) 32mm Keyed _ M12 x 1.75 v25.4 (1.) 55.5 (2.185) ø (1.26) ø 32.2 (1.26) Code: 47 Woodruff Keyed 1/4 x 1 SE J52, Standard M8x (.748) 41.5 (1.633) 28. (1.1) 6.35 / 6.37 (.25 /.251) ø 25.4 (1.) ø (.998) C121

33 Ordering Information / estellschlüssel System de Commande / Imformacion para pedidos TF XXXX X X Page 1 of 2 Series Displacement Schluckvolumen Cylindrée Desplazamiento Mounting Gehäuse Carter Montaje Ports nschluß Plan de raccordement Lumbreras cm 3 /U / cm 3 /rev Code cm 3 /tr / cm 3 /giro / / / / / / / / / / / 477 Code Mounting vail. SE " 2 olt SE " 2 olt Wheel, Front rake Nose L Code H S M W ISO 6149 M22 x 1.5 7/8-14 SE 5/16-18 UNC Manifold 1 G 1/2 vail. M Magneto V 7/8-14 SE M8 U Wheel,Standard N 1 M6 K 2 W* E H Wheel, Optional 6 Hole, Long Pilot Wheel, Machine Nose 1 Not available on L,U or W Mounting Nicht Verfugbar fur L,U und H Gehaeuse Pas disponible pour carter L,U,H????? 2 Only available with with Mounting H Nur moglich Gehaeuse H Possible seulement avec carter H??? SE " 4 olt V* Standard Euro Standard D* Large Wheel Mount * Requires rear porting. Nur Endanschluss moglich Possible seulement avec orifice arriere??? C122

34 Ordering Information / estellschlüssel System de Commande / Imformacion para pedidos Page 2 of 2 XX X XXXX Shaft Welle rbre Eje Rotation Drehrichtung Direction de rotation Rotacion Options Opciones Rear Ports Endanschluß limentazione Laterale Orifices arriér Code vail. xial 7/8-14 Code Shaft vail. 1" 6 Spline 1* 2* 3 4 1" Keyed 1 1/4 Keyed 1 Spline Code Front Port Rotation Standard Reverse 1 Timed Manifold vail. C Y G 1/2 Radial 7/8-14 X G 1/ /4 14 Tooth Spline 19 Tooth Spline 15 Tooth Spline 1 1/4 Tapered Code Rear Port Rotation Standard Reverse 1 Timed Manifold vail. Manifold E 5/ L M8x13 22* 26* 28* 25mm Keyed 25mm Keyed, Stainless Steel 13 Tooth Spline Code No Paint No lackiert lack Paint Schwarz lackiert vail. See Page 219 for dditional Options 41* Long Tooth Spline /4" Keyed 46 47* 32mm Keyed Woodruff Keyed * btriebswelle Ø 25mm Max. Moment cont./int. Coupling shaft Ø 1 inch Max. torque cont./int. rbre 6 SE Couple maxi cont./int. Eje de acoplamiento Coppia max cont./int. } 45/55 Nm C123