LSHT Torqmotors TM and Nichols TM Motors zm04 TJ Series
|
|
- Roy Craig
- 5 years ago
- Views:
Transcription
1 Technical Information / Technische Information / Segni / Informacion Tecnica zm4 HY /,EU 14 Displacements ( in 3 /rev) 14 Schluckvolumen cm 3 /rev 14 Cylindrée 14 Despazamientos Cont Int Maximum Pressure (to 23 ) (to 275 ) Eingangsdruck Pression entrée Presion Maxima The Ultimate in Performance from a Medium Frame Motor Parker s motor provides all that could be expected of a general purpose motor and more. Patented 6:4 spline geometry provides drivetrain strength for severe applications. Roller vanes and sealed orbit commutation assure high volumetric efficiency and smooth slow speed operation. Cooling fluid flow across splines and seals mean long, trouble-free life. Maximum Oil Flow Schluckstrom Débit d huile Caudal Maximo de Aceite (to 2 gpm) lpm Maximum Speed (124 rpm) Drehzahl 124 rpm Vitisse de rotation Maxi Velocidad Maxima Cont Int Maximum Torque (4139 lb in) (5728 lb in) Max Drehmoment 467 Nm 648 Nm Couple Maxi Torque Maximo Maximum Side Load at Key Seitenlast Charges latèrales Carga Maxima Lateral (to 315 lb) N pp 6-71 SD.p65 6 Parker Hannifin Corporation
2 Performance Data / Leistungsdaten Puissance / Datos Tecnicos HY /,EU Motor Series TJ cm 3 /rev in 3 /rev Geometric displacement Geom. Schluckvolumen Cylindrée Despazamientos rev/min Max. Max. intermittent flow Max. Drehzahl Intermittierender Betrieb: Vitisse de rotation maxi Velocidad maxima a caudal intermitente maximo cont / int* l/min g/min Max. oil flow Max. Schluckstrom Débit d huile maxi Caudal Maximo de Aceite cont / int* Max differential pressure Max. Druckgefälle Chute de pression maxi Presion diferencial maxima max Max. supply pressure Max. Eingangsdruck Pression maxi entrée Presion maxima de alimentacion cont / int* Nm lb-in Max. torque Max. Drehmoment Couple maxi Torque Maximo max KW HP cont / int* Nm lb-in Max. performance Max. Leistungabgabe Puissance de sortie maxi Maximo rendimieto Min. starting torque Min. Anlaufmoment Couple min. fourni au dé manrage Torque minimo de arranque TJ 45 TJ 5 TJ 65 TJ 8 TJ 1 TJ 13 TJ 165 TJ 195 TJ 23 TJ 26 TJ 295 TJ 33 TJ 365 TJ Performance data based on testing using 1W4 oil with a viscosity of 43,1 cst. ( S) at 54 C (13 F.). Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistungsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige Abweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. pp 6-71 SD.p65 * Intermittent operation rating applies to 1% of every minute. Intermittierende Werte maximal 1% von jeder Betriebsminute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. 61 Parker Hannifin Corporation
3 Ordering Information / Bestellschlüssel System de Commande / Imformacion para pedidos HY /,EU TJ XXXX 8 XXXX Series Displacement Schluckvolumen Cylindrée Desplazamiento Mounting/Ports Gehäuse/ Carter/Plan de raccordement Montaje/Lumbreras Shaft Welle Arbre Eje Rotation Drehrichtung Direction de rotation Rotacion Options Opciones cm 3 /U / cm 3 /rev Code cm 3 /tr / cm 3 /giro / 2.5 Code Mounting/Porting Wheel Mount, 7/8-14 SAE 5 49 / / / / / / / / / / 17.9 Code Shaft 1 1/4" Tapered* / / 22.6 *See installation instructions / 24. Code Rotation Standard Code AAAB AAAA No Paint No lackiert Black Paint Schwarz lackiert Consult factory for other available options, configurations ordering codes and lead times. pp 6-71 SD.p65 62 Parker Hannifin Corporation
4 Performance Data / Leistungsdaten Puissance / Datos Tecnicos HY /,EU TJ TJ TJ Cont. pp 6-71 SD.p65 Int. Intermittent operation rating applies to 1% of every minute. Intermittierende Werte maximal 1% von jeder Betriebsminute. Performance data based on testing using 1W4 oil with a viscosity of S at 54 C (13 F.). Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre Fonctionnement interm. 1% max. de chaque minute d`utilisation. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Leistungsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige Abweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 63 Parker Hannifin Corporation
5 Performance Data / Leistungsdaten Puissance / Datos Tecnicos HY /,EU TJ TJ TJ Cont. pp 6-71 SD.p65 Int. Intermittent operation rating applies to 1% of every minute. Intermittierende Werte maximal 1% von jeder Betriebsminute. Performance data based on testing using 1W4 oil with a viscosity of S at 54 C (13 F.). Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre Fonctionnement interm. 1% max. de chaque minute d`utilisation. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Leistungsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige Abweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 64 Parker Hannifin Corporation
6 Performance Data / Leistungsdaten Puissance / Datos Tecnicos HY /,EU TJ TJ TJ Cont. pp 6-71 SD.p65 Int. Intermittent operation rating applies to 1% of every minute. Intermittierende Werte maximal 1% von jeder Betriebsminute. Performance data based on testing using 1W4 oil with a viscosity of S at 54 C (13 F.). Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre Fonctionnement interm. 1% max. de chaque minute d`utilisation. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Leistungsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige Abweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 65 Parker Hannifin Corporation
7 Performance Data / Leistungsdaten Puissance / Datos Tecnicos HY /,EU TJ TJ TJ Cont. pp 6-71 SD.p65 Int. Intermittent operation rating applies to 1% of every minute. Intermittierende Werte maximal 1% von jeder Betriebsminute. Performance data based on testing using 1W4 oil with a viscosity of S at 54 C (13 F.). Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre Fonctionnement interm. 1% max. de chaque minute d`utilisation. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Leistungsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige Abweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 66 Parker Hannifin Corporation
8 Performance Data / Leistungsdaten Puissance / Datos Tecnicos HY /,EU TJ TJ Cont. Int. Intermittent operation rating applies to 1% of every minute. Intermittierende Werte maximal 1% von jeder Betriebsminute. Performance data based on testing using 1W4 oil with a viscosity of S at 54 C (13 F.). Performance data is typical. Actual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Leistungsdaten sind gemessen mit SAE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige Abweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. pp 6-71 SD.p65 67 Parker Hannifin Corporation
9 Radial Load / Radiale Wellenbelastung Charges Radiale / Carga Radial Wheel Mount / Radnabengehaeuse Monture à roue / Montaje de rueda (1) HY /,EU The maximum load curve is defined by bearing static load capacity. This curve should not be exceeded at any time including shock loads. Die maximale radiale Wellenbelastungskurve ist definiert als maximale statische Last ohne Drehzahl. Sie gilt als Grenze und sollte keinesfalls überschritten werden (1) Radial Load - N (lbs) () Max Load Curve Dynamic Load Curve La courbe de charge maximale est définie par la capacité de charge statique portante. Cette courbe ne devrait être dépassée en aucun moment y compris pour les charges par à-coups. La curva de carga máxima queda definida por la capacidad de carga estática del cojinete. No se deben superar los valores de esta curva, ni siquiera con cargas provisorias de impacto. The dynamic side load curve is based on unidirectional steady state loads for L 1 bearing life at 3 x 1 6 revolutions. Die zulässige auslege radiale Wellenbelastungskurve ist unter ruhenden, einseitig statisch gerichteten Lastverhältnissen auf eine L 1 Lebensdauer mit 3 x 1 6 Umdrehungen kalkuliert. pp 6-71 SD.p (1) 5.8 (2) 76.2 (3) 11.6 (4) Distance from Mounting Face mm (in) Motor Image Not To Scale 127 (5) (6) Equation to Calculate the Expected Radial Bearing Life Gelichung zur Ermittlung der Lagerlebensdauer Equation to calculate the dynamic bearing life for a given load: Bestimmung der erlaubten radialen Wellenbelastung mit vorgegebener Last La courbe de charge latérale permise se base sur des charges unidirectionnelles en régime permanent pour le roulement L 1 à 3 x 1 6 révolutions. La curva de valores admisibles de carga lateral está basada en cargas constantes para cojinetes L 1 a 3 x 1 6 revoluciones. Use F a, F b and S in equation to determine hours of L 1 bearing life. Die Lebensdauer in Stunden ergibt sich durch einsetzen von F a, F b, und S in die nachstehende Formel. L = 3 x 1 6 { F a} x S F b Where / Mit: S = Shaft Speed RPM / Abtriebswellendrehzahl in min -1 L = Life In Hours / Lebensdauer in Stunden F a = Dynamic side load defined by above curve at a distance from mounting flange. / Erlaubte radiale Wellenbelastung als Function der Laenge F b = Application side load. / Anwendungsseitige Wellenbelastung Note: Calculations are based on L 1 bearing life per ISO 281. Auslegung basiert auf einer L 1 Lenbendauer nach ISO Parker Hannifin Corporation
10 Mounting,Ports/Gehäuse,Anschlüße Carter,Orifices / Montaje,Lumbreras HY /,EU Code: Wheel Mount, 7/8-14 SAE O-Ring "L" ø / (4.9988/4.998) ø 4.6 (.16) 12.4 (.488) (1.45) 19. (.75) (1.84) (.1796) 5.8 (2.) ø 82.55/82.5 (3.249/3.248) *To Port Spotface 63.83* (2.513)* 45 ø 95.25/95.15 (3.75/3.746) ø / 93. (3.65/3.675) A B A B 1. (5.31) 7/8-14 SAE O-Ring 4.13 (1.58) Max ø 72.9 (2.87) as cast 2 x 25.4 (1.) (5.81) 13.5 (17/32) Code disp Weight/Gewicht kg Poids/Peso (lb) (15.) (15.2) (15.4) (15.6) (15.8) (16.7) (17.2) (17.9) (18.3) (19.) (19.4) (2.) (2.7) (21.2) Length "L" mm "L" (in) (4.21) (4.27) (4.39) (4.52) (4.64) (4.89) (5.14) (5.39) (5.64) (5.89) (6.14) (6.39) (6.73) (6.89) English equivalents for metric specifications are shown in ( ). pp 6-71 SD.p65 69 Parker Hannifin Corporation
11 Shafts / Abtriebswellen Arbre / Ejes HY /,EU Code U Code: 8 1 1/4" Tapered 16.9 (4.21) 5/16x1 SAE J52 1:8 (1.378) Nm (37 Ft Lb) Max See installation instructions ø 31.88/31.5 (1.25/1.24) 1-2UNEF 19 (.748) 7.96/7.94 (.313/.312) 3.5/3.1 (.13/.12) English equivalents for metric specifications are shown in ( ). pp 6-71 SD.p65 7 Parker Hannifin Corporation
12 Notes HY /,EU pp 6-71 SD.p65 71 Parker Hannifin Corporation
LSHT Torqmotors TM and Nichols TM Motors zm07 TH Series
Technical Information /Technische Information / Segni/Informacion Tecnica 13 Displacements (8.6 to 58.5 in 3 /rev) 13 Schluckvolumen 141... 959 cm 3 /rev 13 Cylindrée 13 Despazamientos Cont. Int. Maximum
More informationLSHT Torqmotors TM and Nichols TM Motors zm08 TK Series
Technical Information /Technische Information / Segni/Informacion Tecnica 7 Displacements (15.3 to 61. in 3 /rev) 7 Schluckvolumen 25... 1 cm 3 /rev Cylindrée 7 Despazamientos Cont. Int. Maximum Pressure
More informationTechnical Information /Technische Information / Segni/Informacion Tecnica. LSHT Torqmotors and Nichols Motors TK Series / Serie / Série
Technical Information /Technische Information / Segni/Informacion Tecnica 7 Displacements (15.3 to 61. in 3 /rev) 7 Schluckvolumen 25... 1 cm 3 /rev Cylindrée 7 Despazamientos Maximum Pressure ( psid)
More informationTechnical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica zm2 T Series / Serie / Série HY13-159-4/,EU 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen 36... 39 cm 3 /rev 15 Cylindrée
More informationTechnical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen 36... 39 cm 3 /rev 15 Cylindrée 15 Despazamientos Cont Int Maximum Pressure
More informationTechnical Information /Technische Information / Segni/Informacion Tecnica. LSHT Torqmotors and Nichols Motors TG Series / Serie / Série
Technical Information /Technische Information / Segni/Informacion Tecnica 3 Displacements (8.6 to 58.5 in 3 /rev) 3 Schluckvolumen 4... 959 cm 3 /rev 3 Cylindrée 3 Despazamientos Maximum Pressure (3 psid)
More informationCAUTION! Exceptional Strength and Durability in a High Performance Motor/Brake Package
Technical Information /Technische Information / Segni/Informacion Tecnica 13 Displacements (8.6 to 58.5 in3/rev) 13 Schluckvolumen 141... 959 cm 3 /rev 13 Cylindrée 13 Despazamientos Cont. Int. Maximum
More informationLSHT Torqmotors TM and Nichols TM Motors TF Series
Technical Information /Technische Information / Segni/Informacion Tecnica 11 Displacements (4.9-29.1 in 3 /rev) 11 Schluckvolumen 81... 477 cm 3 /rev 11 Cylindrée 11 Despazamientos Cont. Int. Maximum Pressure
More informationLSHT Torqmotors and Nichols Motors 716 Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica 6 Displacements Series (3.6 12.9 in 3 /rev) 6 Schluckvolumen 59 211 cm 3 /rev 6 Cylindrée Parallel (7.2 25.8 in 3 /rev) 6 Despazamientos
More informationLSHT Torqmotors and Nichols Motors 110A Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica 9 Displacements (3.6 24.1 in 3 /rev) 9 Schluckvolumen 59 395 cm 3 /rev 9 Cylindrée 9 Despazamientos Cont Int Maximum Pressure
More informationLSHT Torqmotors TM and Nichols TM Motors zm09 110A Series
Technical Information /Technische Information / Segni / Informacion Tecnica 7 Displacements (3.6 16.4 in 3 /rev) 7 Schluckvolumen 59 269 cm 3 /rev 7 Cylindrée 7 Despazamientos Cont Int Maximum Pressure
More informationHydraulics. Low Speed High Torque Brake Motors BH Series. Technical Information /Technische Information / Segni/Informacion Tecnica C204
Technical Information /Technische Information / Segni/Informacion Tecnica 12 Displacements (8.6 to 58.5 in 3 /rev) 12 Schluckvolumen 140... 958 cm 3 /rev 12 ylindrée 12 Despazamientos ont. Int. Maximum
More informationHydraulics. Technical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen
More informationLSHT Torqmotors and Nichols Motors 700 Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica Displacements Series (3. 1.9 in 3 /rev) Schluckvolumen 59 11 cm 3 /rev Cylindrée Parallel (7. 5.8 in 3 /rev) Despazamientos 118
More informationHydraulics. Technical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica TE Series / Serie / Série HY13-1553-1/N,EU 14 Displacements (2.5 24. in 3 /rev) 14 Schluckvolumen 45... 39 cm 3 /rev 14 ylindrée
More informationLSHT Torqmotors and Nichols Motors. Catalog No. HY /US,EU
LSHT Torqmotors and Nichols Motors Catalog No. HY13-159-9/US,EU WRNING FILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS ND/OR SYSTEMS DESCRIED HEREIN OR RE- LTED ITEMS CN CUSE DETH, PERSONL
More informationHydraulics. Technical Information /Technische Information / Segni/Informacion Tecnica. Low Speed High Torque Hydraulic Motors TF Series
Technical Information /Technische Information / Segni/Informacion Tecnica 11 Displacements (4.9-29.1 in 3 /rev) 11 Schluckvolumen 81... 477 cm 3 /rev 11 Cylindrée 11 Despazamientos Cont. Int. Maximum Pressure
More informationHydraulics. Low Speed High Torque Brake Motors BG Series. Technical Information /Technische Information / Segni/Informacion Tecnica C170
Technical Information /Technische Information / Segni/Informacion Tecnica 12 Displacements (8.6 to 58.5 in 3 /rev) 12 Schluckvolumen 140... 960 cm 3 /rev 12 ylindrée 12 Despazamientos ont. Int. Maximum
More informationTechnical Information /Technische Information / Segni / Informacion Tecnica 7 Displacements (3.6 16.4 in 3 /rev) 7 Schluckvolumen 59 269 cm 3 /rev 7 Cylindrée 7 Despazamientos Cont Int Maximum Pressure
More informationÀ cylindrée fixe Gamme MAP 50
pplications Moteur à pistons axiaux M+S À cylindrée fixe Gamme MP Cylindrée de 6,6 à cm Vitesse de rotation maxi de tmin Couple maxi danm Puissance maxi 6 Kw ébit d huile maxi : 9 lmin Charge axiale maxi
More informationMotors & Pumps- Hydraulic Pumps, Motors & Power Units
- Hydraulic umps, Motors & ower Units - Rapid Response...12-1 12-6 Hydraulic umps - Check Valves...12-7 Hydraulic umps - ower Units...12-8 12-9 12MOTORS & UMS Hydraulic umps - Vane ump...12-10 Motors...12-11
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationCOMPANY STANDARD SPECIAL POWER UNIT APPLICATIONS
COMPANY STANDARD SPECIAL POWER UNIT APPLICATIONS www.sternhidraulica.com Características técnicas Technical characteristics Los actuadores rotativos generan un par de torsión a través de una rueda dentada
More informationGEAR PUMPS DIMENSIONAL DETAILS
DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310
More informationOMEW Hydraulic Motor Versions
Versions VERSIONS Mounting flange Wheel Shaft Port size European version US version Clockwise shaft rotation (CW version) 1) Counter clockwise shaft rotation (CCW version) 1) Tapered 35 mm G 1 /2 X X X
More informationEA5506. Electrically Actuated Carbon Steel PN16 Ball Valve. Description
Electrically Actuated Carbon Steel PN16 Ball Valve Direct Mount No Brackets Needed Carbon Steel Body WCB Full Bore DN15-DN100 / 1/2-4" Powerful Electric Actuator Many Optional Extras Offered Seats Description
More information6.21 (Conventional / Convencional) 6.22 (Progressive / Progresivo) Series (Progressive / Progresivo)
10 20 Series 6.21 (Conventional / Convencional) 6.22 (Progressive / Progresivo) Mounting on the shaft by keys and oil inlet through the shaft. Fijación al eje por chavetas y entrada de aceite por el eje.
More informationOMP Hydraulic Motor Versions
Versions VERSIONS Mounting flange Shaft Port size European version US version Side port version End port version Flange port version G 1 /2 X X X No No OMP Cyl. 25 mm G 1 /2 X X X Yes No OMP G 1 /2 X X
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationMobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6G, T67G, T6ZC Denison Vane Technology, fixed displacement aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
More informationMobile Hydraulic Pumps T6DCM, T6DCP, T6DCMW. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6DCM, T6DCP, T6DCMW Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators
More informationC9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationPVC FOOT VALVE SKU: CV4674
SKU: CV4674 PVC-U Foot Check Valve Socket and BSP PVC-U Fuß Rückschlagventil Sockel und BSP PVC-U Pie válvula de retención del zócalo y BSP PVC-U pied Clapet Socket et BSP PVC Foot Check Valve - Socket
More informationHydraulic Motor Model BMV
UID CMPNENTS, INC. MDE BMV 1000 Displacement in 3 /rev (cm 3 /rev) Max Speed rpm Max Torque Max Differential psi 20.32 (333) Hydraulic Motor Model BMV The BMV series motor adapts the advanced gear set
More informationYMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
More informationTorqmotor Series TF/TG/TH/TK
Sepehr Hydraulic Asia Series TF/TG/TH/TK max. 49 kw Catalogue HY11-3213/EU Ed. 06 / 2003 Series DE Hinweis Die in diesem Katalog oder in Form anderer Informationen durch die Parker Hannifin GmbH, ihre
More informationHigh Speed Hydraulic Motors. Catalog HY /NA zm16 zm17
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA zm16 zm17 223 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed
More informationMobile Hydraulic Pumps T6DCCM. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6DCCM Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing
More informationPVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS
14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group
More informationCLUTCH-BRAKES SERIES 5.8 FRENO-EMBRAGUES SERIE 5.8
CLUTCH-BRAKES SERIES 5.8 FRENO-EMBRAGUES SERIE 5.8 This series corresponds to the latest of the pneumatic clutch-brakes developed by GOIZPER. One of its main characteristics is that it obtains the maximum
More informationIndustrial Hydraulic Pumps T7DBB, T7DBBS. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Industrial T7DBB, T7DBBS Denison Vane Technology, fixed displacement Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing our parts to keep you
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationTruck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps
Series F1, F2, T1 Fixed Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Hydraulic Pumps,
More informationHYDRAULIC CLUTCH-BRAKE SERIES
HYDRAULIC CLUTCH-BRAKE SERIES SERIES DE FRENO- EMBRAGUES HIDRáULICOS GOIZPER 21 Series 6.21 (Conventional / Convencional) 6.22 (Progressive / Progresivo) Mounting on the shaft by keys and oil inlet through
More informationYMTE SPECIFICATION DATA
SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.
More informationHydraulic Motor Model BMSY
UID CMPNENTS, INC. Hydraulic Motor Model The series motor adapts the advanced gear set design with multifunctional operations in accordance with the application requirements. The output shaft tapered roller
More informationChar-Lynn HP 30 Motor
Char-Lynn HP 30 Motor Displacements cm 3 /r (in 3 /r) 344 (21.0) 400 (24.4) 434 (26.5) 480 (29.3) 677 (41.3) Engineered for Performance For the past 45 years, Char-Lynn has been recognized as the industry
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Contents Contents Page PGP/PGM500 Characteristics... 3 PGP502 Ordering... 4 PGP502 Performance curves... 5
More informationHYDRAULIC MOTORS GENERAL INFORMATION
GENERAL INFORMATION MGL... Document: HM-1-Dec 2012 Applications: -Agricultural harvesters and seeders -Conveyors -Machine tools -Food industries -Turn equipment -Brush drivers -Sweepers and floor polishers
More informationMJ SERIES LOW SPEED HIGH TORQUE MOTORS
MJ SERIES LOW SPEED HIGH TORQUE MOTORS HIGH EFFICIENCY TORQUE MOTORS The MJ Series Low Speed High Torque Motor is available in 10 displacement sizes. The MJ Series motor is constructed using heavy-duty
More informationTorqmotor TM. Series TF / TG / TH / TK max 49 kw Low-speed hydraulic motor
Torqmotor TM Series TF / TG / TH / TK max 49 kw Low-speed hydraulic motor aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationHydraulic gear pumps and motors
PL 01 T E DISPLACEMENTS From To Hydraulic gear pumps and motors 0.07 in 3 /rev (1.07 cm 3 /rev) 5.56 in 3 /rev (91.10 cm 3 /rev) through bore aluminum body PRESSURE Max. Continuous Max. Intermittent Max.
More informationService Manual Series F12
Bulletin HY30-5504-M1/UK Effective: June, 2006 Supersedes: August, 2003 List of contents Page General information...3 Specifications...4 Disassembling...5-10 Assembling...11-16 Change of shaft seal...17
More information5.2 MEDIUM HEAVY DUTY SERIES SIZE 3
.2 MEDIUM HEAVY DUTY SERIES SIZE 3 CONTENTS PGI101 Ordering Code.2.1 Medium Heavy Duty Series Technical Information.2.2 Specifications.2.3 Hydraulic fluids.2.4 Viscosity range.2. Temperature range.2.6
More information4.2 FIXED DISPLACEMENT DOUBLE PUMP
4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range
More informationHydraulic Motor Model BMK6
Hydraulic Motor Model BMK6 Crossover to Char-ynn 6000 Series gear set design with multifunctional operations in accordance with the application requirements. The output shaft tapered roller bearings permit
More informationHigh Speed Hydraulic Motors
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA C C225 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed range
More informationHydraulic Motor Model BMV
APPENDIX HYDRAUIC MTRS HYDRAUIC PUMPS GAUGES & ACCESSRIES UID CMPNENTS, INC. Technical Specifications MDE BMV 315 BMV 400 BMV 500 BMV 630 BMV 800 BMV 1000 Displacement in 3 /rev (cm 3 /rev) Max Speed rpm
More informationQuality. 1. Cam ring 2. Cam roller 3. Piston 4. Shaft coupling Connection block 10. Valve plate 11. Axial bearing 6
Functional description Hägglunds hydraulic industrial motor COMPACT CB is of the radial-piston type with a rotating cylinder block/hollow shaft and a stationary housing. The cylinder block is mounted in
More informationDenison Mobile & Industrial Hydraulic Pumps T6*R
Denison Mobile & Industrial Hydraulic Pumps T6*R Vane Technology, fixed displacement () + () + () ± θ θ ± DIMENSIONS & OPERATING CHARACTERISTICS - Weight : 20,4 kg - T6CR SERIES INDUSTRIAL APPLICATION
More informationWHITE MOTORS. Features. Max Torque lb-in (Nm) Cont. Inter. *Stall
Due to its case drain design, the Series motor is an excellent medium size motor for applications with high duty cycles or frequent direction reversals. The case drain design produces a number of benefits
More informationSpool Valve Hydraulic Motors Series J
Spool Valve Hydraulic Motors Series J 10.201 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.201 EN EATON_Motoren J Series english J Series Highlights Thrust Bearing Bushing Port B Port
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationHigh Torque Low Speed Motors MR - MRE
High Torque Low Speed Motors MR - MRE Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationSPECIAL HYDRAULIC MOTORS AND MOTOR-BRAKES
SPECIAL HYDRAULIC AND MTRBRAKES CNTENTS Page Hydraulic Motors Series HP... Hydraulic Motors Series HR...11 Hydraulic Motors Series MLHRW...1 Hydraulic Motors Series...2 Hydraulic Motorbrakes Series BHR...3
More informationHydraulic Pumps T7 for variable speed drives
FC Hydraulic Pumps T7 for variable speed drives Denison Vane Technology Catalogue HY29-11/UK Content General Information Introduction and product key features 3 Main Technical Data Main table for single
More informationMODELS BMSY 154 (9.39) 125 (7.63)
MDES BMSY The BMSY series motor adapts the advanced RRTRC gear set design with DISC distribution fl ow and high pressure. These motors can be supplied with various options for multifunctional operations
More informationTMVW Orbital Motors. Technical Information
Orbital Motors Technical Information A Wide Range of Orbital Motors A Wide Range of Orbital Motors F300030 Tif Sauer-Danfoss is a world leader within production of low speed orbital motors with high torque.
More informationUNE ISO RNL
SERIE RNL UNE 166.002 ISO 14001 RNL 1063 Agrupadas según eje Grouped according to the shaft form RNL 1450 R.P.M..M. Altura () Head Altura () Head Caudal (Q) Capacity RNL 2900 R.P.M..M. Caudal (Q) Capacity
More information» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;
HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery etc. CONTENTS
More information» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;
HYDRAULIC HYDRAULIC APPLICATION» Conveyors;» Feeding mechanism of robots and manipulators;» Metal working machines;» Textile machines;» Machines for agriculture;» Food industries;» Grass cutting machinery
More informationHYDRAULIC MOTORS EPMS - series 3
HYDRAULIC EPMS - series APPLICATION» Conveyors» Metal working machine» Machines for agriculture» Road building machines» Mining machinery» Food industries» Special vehicles etc. CONTENTS Specification
More informationPositioner for Pneumatic Actuators
SKU: AP9003 VOLT Digital Electro Pneumatic Positioner Electro Pneumatic Positioner for Rotary Actuators Electro Stellungsregler für Schwenkantriebe Electro neumático Posicionador para Rotary Actuators
More informationGV4223. Cast Steel Globe Valve API 600 ANSI Class 150 & 300. Sizes 2" - 12"
Sizes 2" - 12" Cast Steel Globe Valve API 600 ANSI Class 150 & 300 Swivel Plug Disc Design Standard Bolted Bonnet Construction Outside Screw and Yoke, Rising stem Handwheel Operated (Actuation Available)
More informationGear Pumps. Series PGP Fixed Displacement Pumps, Cast-Iron Designs
Gear Pumps Series PGP Fixed Displacement Pumps, Cast-Iron Designs aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Table
More informationTruck Hydraulics. Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories
Series GPA, GP1, F1, F2, T1, VP1, Fixed and Variable Displacement Pumps, Motors and Accessories Conversion factors 1 kg... 2,20 lb 1 N... 0,225 lbf 1 Nm... 0,738 lbf ft 1 bar...14,5 psi 1 l...0,264 US
More informationAxial Piston Pump Series PV Design 45 Variable Displacement. Catalogue HY /UK February 2007
Design 45 Variable Displacement February 2007 Introduction With thru drive for single and multiple pumps Swash plate type for open circuit Technical Features Low noise level Fast response (eg. PV046: upstroke
More informationFEATURES SPECIFICATIONS
FETURES 1 Heavy-Duty Drive Link is up to 30% stronger than competitive designs for longer life. 1 2 3 H 2 Three-Zone Orbiting Valve precisely meters oil to produce exceptional volumetric efficiency. 3
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationWHITE MOTORS. Max Torque lb-in (Nm) Cont. Inter. *Stall
The Series motor is the leader in its class, offering high efficiency with rugged durability. The three-zone orbiting disk valve, laminated manifold and Roller Stator motor work harmoniously to produce
More informationOMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Yes Yes Yes Yes Yes Yes Standard Yes Yes Yes Yes Yes Yes P.t.o. Yes Yes
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationVane motor high performance hydraulic series M5B - M5BS - M5BF
Vane motor high performance hydraulic series M5B - M5BS - M5BF Publ. 2 - AM172 - B 1 / 25 / FB Replaces : 2 - AM172 - A L11-2172 - 2 CHARACTERISTICS - M5B* SERIES LOW NOISE MOTOR 12 vanes and a patented
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationP2060 P2075 P2105 P2145 P3105 P3145
Technical Information Technical Features P2 Series Compact design Low noise level Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed Technical Data P3 Series P2 Series
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationMOMV SERIES HYDRAULIC MOTOR
MOMV SERIES HYDRAULIC MOTOR MOMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction
More informationOrbital Motors OMS, OMT and OMV Orbital Motors
MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 214 Converted
More informationKUB T120. Kitchen fans. Caisson de ventilation. Küchenabluftboxen. Extractor de cocina KITCHEN FANS
Kitchen fans Caisson de ventilation Küchenabluftboxen Extractor de cocina Kitchen exhaust units are used for installation where the air is slightly greasy or the air temperature is up to 120 C. Typical
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationSKU: DR4306. Fixed Orifice Double Regulating Valve
SKU: DR4306 VOLT Fixed Orifice Double Regulating Valve 1/2" - 2" Brass Double Regulating Valve with Test Points 1/2" - 2" Messing Doppelregelventilmit Testpunkte 1/2" - 2" Latón Doble Válvula reguladora
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationRectangular Flexible connection duct silencer Filter cassette Electrical duct heater LJ/E
Rectangular duct fans Caissons de ventilation pour gaines rectangulaires Rechteckige Kanalventilatoren Rektangulær kanalventilator Rectangular ducts fans for ventilation and air conditioning systems, mounted
More information