Technical Information / Technische Information / Segni / Informacion Tecnica
|
|
- Alannah Walsh
- 6 years ago
- Views:
Transcription
1 Technical Information / Technische Information / Segni / Informacion Tecnica zm2 T Series / Serie / Série HY /,EU 15 Displacements ( in 3 /rev) 15 Schluckvolumen cm 3 /rev 15 Cylindrée 15 Despazamientos Cont Int Maximum Pressure (to18 ) (to 24 ) Eingangsdruck Chaute de pression max. Presion Maxima Light to Medium Duty Low Speed, High Torque Motor This light to medium duty motor incorporates all the features of heavy duty motors. Design features include a high pressure shaft seal so external drains are never required, roller vane technology for automatic wear compensation, and full flow internal cooling and flushing. This is a very economical motor for most light to medium duty applications. Maximum Oil Flow Schluckstrom Débit d huile Caudal Maximo de ceite (to 15 gpm) lpm Maximum Speed (932 rpm) Drehzahl 932 rpm Vitesse de rotation Velocidad Maxima Cont Int Maximum Torque (3897 lb in) (4783 lb in) Max Drehmoment 44 Nm 54 Nm Couple Maxi Torque Maximo Maximum Side Load at Key Seitenlast Charges latèrales Carga Maxima Lateral (to 11 lb) N pp 2- T SD.p65 2 Parker Hannifin Corporation
2 Performance Data / Leistungsdaten Puissance / Datos Tecnicos T Series / Serie / Série HY /,EU Motor Series T cm 3 /rev in 3 /rev Geometric displacement Geom. Schluckvolumen Cylindrée Despazamientos rev/min Max. oil flow Max. Schluckstrom Débit d huile maxi Caudal Maximo de ceite Max. Differential Pressure Max. Druckgefälle Chute de pression maxi Presion diferencial maxima Max. Max. intermittent flow Max. Drehzahl Intermittierender etrieb: Vitesse de rotation maxi Velocidad maxima a caudal intermitente maximo cont / int* l/min g/min cont / int* max Max. supply pressure Max. Eingangsdruck Pression maxi entrée Presion maxima de alimentacion cont / int* Nm lb-in Max. torque Max. Drehmoment Couple maxi Torque Maximo max KW HP cont / int* Nm lb-in Max. performance Max. Leistungabgabe Puissance de sortie maxi Maximo redinmiento Min. starting torque Min. nlaufmoment Couple min. fourni au dé manrage Torque minimo de arranque T 36 T 45 T 5 T 65 T 8 T 1 T 13 T 165 T 195 T 23 T 26 T 295 T 33 T 365 T Performance data based on testing using 1W4 oil with a viscosity of 43,1 cst. (2 S) at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. pp 2- T SD.p65 * Intermittent operation rating applies to 1% of every minute. Intermittierende Werte maximal 1% von jeder etriebsminute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. 21 Parker Hannifin Corporation
3 Ordering Information / estellschlüssel System de Commande / Imformacion para pedidos T Series / Serie / Série HY /,EU T XXXX XX XX XXXX Series Displacement Schluckvolumen Cylindrée Desplazamiento Mounting/Ports Gehäuse/nschluß Carter/Plan de raccordement Montaje/Lumbreras Shaft Welle rbre Eje Rotation Drehrichtung Direction de rotation Rotacion Options Opciones cm 3 /U cm 3 /tr Code cm 3 /giro cu in 3 /rev / / / / / / / / / / / / / / / 24. Code Mounting vail. SE "" 2 olt, 5/16-18 UNC Manifold M SE "" 2 olt, P 1/2-14 NPTF SE "" 2 olt, 7/8-14 SE S Code Standard Code Shaft 1" Straight 9 w/.38" Crosshole " Keyed 1" 6 Spline Rotation FM 4 olt, 1/2-14 NPTF 13 Long 1" Keyed 1" Keyed; 21 Corrosion Resistant 4 olt, 1/2-14 NPTF FP 26 25mm Keyed w/ 8mm Key 4 olt, 7/8-14 SE 28 7/8" 13 Tooth Spline FS Code Options No Paint No lackiert lack Paint Schwarz lackiert Consult factory for other available options, configurations ordering codes and lead times. pp 2- T SD.p65 22 Parker Hannifin Corporation
4 Performance Data / Leistungsdaten Puissance / Datos Tecnicos T Series / Serie / Série HY /,EU T Torque [lb/in] T T Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. pp 2- T SD.p65 Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 23 Parker Hannifin Corporation
5 Performance Data / Leistungsdaten Puissance / Datos Tecnicos T Series / Serie / Série HY /,EU T T T Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. pp 2- T SD.p65 Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 24 Parker Hannifin Corporation
6 Performance Data / Leistungsdaten Puissance / Datos Tecnicos T Series / Serie / Série HY /,EU T 13 T T Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. pp 2- T SD.p65 Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 25 Parker Hannifin Corporation
7 Performance Data / Leistungsdaten Puissance / Datos Tecnicos T Series / Serie / Série HY /,EU T T T Torque [lb/in] Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation. Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. pp 2- T SD.p65 Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 26 Parker Hannifin Corporation
8 Performance Data / Leistungsdaten Puissance / Datos Tecnicos T Series / Serie / Série HY /,EU T T T Cont. Int. Intermittent operation rating applies to 1% of every minute. Fonctionnement interm. 1% max. de chaque minute d`utilisation Intermittierende Werte maximal 1% von jeder etriebsminute. Capacidad de funcionamiento intermitente valida para 1% por cada minuto. Performance data based on testing using 1W4 oil with a viscosity of 2 S at 54 C (13 F.). Performance data is typical. ctual data may vary slightly from one production motor to another. Les donnees sur les performances sont basees sur des tests utilisant de l huile 1W4 d une viscosite de 2 S a 54 C (13 F). Ces donnees correspondent a des situations typiques. Les donnees reelles peuvent varier legerement d un moteur de production a l autre. pp 2- T SD.p65 Leistungsdaten sind gemessen mit SE 1W4 bei einer Viskositaet von 43,1 Cst bei 54 C. Geringfuegige bweichungen von den Katalogdaten sind moeglich. Datos tecnicos obtenidos con aceite 1W4 de 2 S de viscosidad a 54 C (13 F). Los datos proporcionados son valores tipcos. Los valores exactos reales podrian tener una pequena variacion entre distintos motores. 27 Parker Hannifin Corporation
9 Radial Load / Radiale Wellenbelastung Charges Radiale / Carga Radial T Series / Serie / Série HY /,EU Shaft Side Load Capacity N (lb) 8896 (2) 87 (18) 7117 (16) 6228 (14) 5338 (12) 4448 (1) 59 (8) 2669 (6) 1779 (4) 89 (2) Speed (RPM).5 In. 1. In. 1.5 In. The allowable side load curve is based on bushing life of 2.5 x 1 6 revolutions. Die zulaessige radiale Wellenbelastung bezieht sich auf die Lager-Lebensdauer 2,5 x 1 6 Umdrehungen. L effort radial admissible sur l arbre depend a une duree de vie 2,5 x 1 6 de rotation. La curva de carga lateral admisible se basa en vida util de cojinete de 2.5 x 1 revoluciones (.5) 25.4 (1.) 38.1 (1.5) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 28 Parker Hannifin Corporation
10 Mounting,Ports/Gehäuse,nschlüße Carter,Orifices / Montaje,Lumbreras T Series / Serie / Série HY /,EU Code: M SE 2-olt, 5/16-18 UNC Manifold L 48.3 (1.9) 4 x 5/16-18 UNC 12.7 (.5) 2.55 (.1) 14.2 (.56) 63.5 (2.) (1.9) (1.94) - - ø 95.5 (3.76) 45.7 (1.8) (1.) ø 82.5 / (3.248 / 3.25) 2 x (1.25) 2 x (.562) Motor with manifold mount is supplied with 2 O-rings. Zum Motor mit Universalanschluß werden 2 O-Ringe geliefert. Deux joints toriques sont livrés avec les moteurs a plan de raccordement universel. Il blocchetto connessioni è corredato da 2 OR (5.1) / (.539 /.523) ø (4.188) Code M disp Weight/Gewicht kg Poids/Peso (lb) (12.9) (13.3) (13.5) (13.8) (14.) (14.3) (14.9) (15.5) (16.2) (16.7) (17.2) (17.8) (18.4) (19.1) (19.4) Length"L" mm "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) Code: P SE 2-olt, 1/2-14 NPTF L (.1) (1.9) (.56) (1.9) (1.8) (1.94) ø 95.5 (3.76) ø 82.5 / (3.248 / 3.25) (5.1) 1/2-14 NPTF 2 x (.9) / (.539 /.523) ø (4.188) Code P disp Weight/Gewicht kg Poids/Peso (lb) (12.9) (13.3) (13.5) (13.8) (14.) (14.3) (14.9) (15.5) (16.2) (16.7) (17.2) (17.8) (18.4) (19.1) (19.4) Length"L" mm "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 29 Parker Hannifin Corporation
11 Mounting,Ports/Gehäuse,nschlüße Carter,Orifices / Montaje,Lumbreras T Series / Serie / Série HY /,EU Code: S SE 2-olt, 7/8"-14 SE O-Ring L (.1) (1.9) (.56) (1.9) (1.8) (1.94) ø 95.5 (3.76) ø 82.5 / (3.248 / 3.25) (5.1) 7/8-14 SE O-Ring 2 x (.9) / (.539 /.523) ø (4.188) Code S disp Weight/Gewicht kg Poids/Peso (lb) (12.9) (13.3) (13.5) (13.8) (14.) (14.3) (14.9) (15.5) (16.2) (16.7) (17.2) (17.8) (18.4) (19.1) (19.4) Length"L" mm "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) Code: FM 4-olt, 5/16-18 UNC Manifold - - ø 95.5 (3.76) 45.7 (1.8) "L" 48.3 (1.9) 4 x 5/16-18 UNC 12.7 (.5) (1.) 2.55 (.1) ø 44.4 / (1.748 / 1.75) 2 x (1.25) 2 x (.562) 63.5 (2.) (1.9) ø (3.25) 45 3/8-16 UNC 2 x 56.9 (2.24) (1.94) Motor with manifold mount is supplied with 2 O-rings. Zum Motor mit Universalanschluß werden 2 O-Ringe geliefert. Deux joints toriques sont livrés avec les moteurs a plan de raccordement universel. Il blocchetto connessioni è corredato da 2 OR. Code FM disp Weight/Gewicht kg Poids/Peso (lb) (12.3) (12.4) (12.5) (12.8) (13.1) (13.4) (13.9) (14.6) (15.5) (15.8) (16.3) (16.8) (17.5) (18.2) (18.5) Length"L" mm "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) (6.79) (7.4) (7.29) (7.54) (7.88) (8.4) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 3 Parker Hannifin Corporation
12 Mounting,Ports/Gehäuse,nschlüße Carter,Orifices / Montaje,Lumbreras T Series / Serie / Série HY /,EU Code: FP 4 olt, 1/2-14 NPTF ø 95.5 (3.76) "L" 48.3 (1.9) 1/2-14 NPTF 2.55 (.1) (1.8) ø 44.4 / (1.748 / 1.75) 2 x (.9) (1.9) ø (3.25) 45 3/8-16 UNC 2 x 56.9 (2.24) (1.94) Code FP disp Weight/Gewicht kg Poids/Peso (lb) (12.3) (12.4) (12.5) (12.8) (13.1) (13.4) (13.9) (14.6) (15.5) (15.8) (16.3) (16.8) (17.5) (18.2) (18.5) Length"L" mm "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) (6.79) (7.4) (7.29) (7.54) (7.88) (8.4) Code: FS 4 olt, 7/8"-14 SE O-Ring ø 95.5 (3.76) "L" 48.3 (1.9) 7/8-14 SE O-Ring 2.55 (.1) (1.8) ø 44.4 / (1.748 / 1.75) 2 x (.9) (1.9) ø (3.25) 45 3/8-16 UNC 2 x 56.9 (2.24) (1.94) Code FS disp Weight/Gewicht kg Poids/Peso (lb) (12.3) (12.4) (12.5) (12.8) (13.1) (13.4) (13.9) (14.6) (15.5) (15.8) (16.3) (16.8) (17.5) (18.2) (18.5) Length"L" mm "L" (in) (5.22) (5.36) (5.42) (5.54) (5.67) (5.79) (6.4) (6.29) (6.54) (6.79) (7.4) (7.29) (7.54) (7.88) (8.4) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 31 Parker Hannifin Corporation
13 Shafts / btriebswellen rbre / Ejes T Series / Serie / Série HY /,EU Code Code F Code: 9 1" Straight with.38" Crosshole 44.7 (1.76) Code: 1 1" Keyed Code: 21 Corrosion Resistant 44.7 (1.76) Code: 11 1" 6 Spline 44.7 (1.76) Code: 13 Long 1" Keyed 49.3 (1.94) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 32 Parker Hannifin Corporation
14 Shafts / btriebswellen rbre / Ejes T Series / Serie / Série HY /,EU Code: 9 ø 9.53 / 9.91 (.375 /.39) 1" Straight with.38" Crosshole (.571) (.531) 38.6 (1.52) ø / 25.4 (.999 / 1.) Code: (.748) 1" Keyed Code: 21 Corrosion Resistant 1/4 x 1 SE J (1.114) (1.88 ) 1/4-2 UNC (15.8) (1.52) ø (1.11) 6.37 (.251) 6. (.25) ø / 25.4 (.999 / 1.) 6 SE J499 Code: 11 1" 6 Spline 25.4 (1.) MIN 38.6 (1.52) ø (.997) 25.2 (.985) 1/4-2 UNC 15.8 (.62) 1.32 (.52) 1.17 (.46) 4.88 (.192) 6 o 6.27 (.246) 6.2 (.244) ø (.848) (.838) Code: 13 Long 1" Keyed 1.24 (.49) 19. (.748) 1/4 x 1 SE J52 ø 28.3 (1.14) (1.88) 6.37 (.251) 6. (.25) 43.2 (1.7) 1.32 (.52) 1.17 (.46) ø / 25.4 (.999 / 1.) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 33 Parker Hannifin Corporation
15 Shafts / btriebswellen rbre / Ejes T Series / Serie / Série HY /,EU Code Code F Code: 26 25mm Keyed with 8mm Key 5.4 (1.98) Code: 28 7/8" 13 Tooth Spline 41.4 (1.63) English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 34 Parker Hannifin Corporation
16 Shafts / btriebswellen rbre / Ejes T Series / Serie / Série HY /,EU Code: 26 25mm Keyed with 8mm Key Key 8 x 7 x 23 mm 42.6 (1.677) ø25.15 (.98) 25.2 (.98) M8 x (.75) 8. (.315) 7.96 (.313) Code: 28 7/8" 13 Tooth Spline 18.2 (.715) 17.9 (.75) 17.8 (.7) MIN ø (.872) 21.9 (.862) SE J498 16/32 Spline English equivalents for metric specifications are shown in ( ). pp 2- T SD.p65 Parker Hannifin Corporation
LSHT Torqmotors TM and Nichols TM Motors zm09 110A Series
Technical Information /Technische Information / Segni / Informacion Tecnica 7 Displacements (3.6 16.4 in 3 /rev) 7 Schluckvolumen 59 269 cm 3 /rev 7 Cylindrée 7 Despazamientos Cont Int Maximum Pressure
More informationHydraulics. Technical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica Low Speed High Torque, Hydraulic Motors T Series / Serie / Série HY13-1553-1/N,EU 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen
More informationLSHT Torqmotors and Nichols Motors. Catalog No. HY /US,EU
LSHT Torqmotors and Nichols Motors Catalog No. HY13-159-9/US,EU WRNING FILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS ND/OR SYSTEMS DESCRIED HEREIN OR RE- LTED ITEMS CN CUSE DETH, PERSONL
More informationLSHT Torqmotors and Nichols Motors 110A Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica 9 Displacements (3.6 24.1 in 3 /rev) 9 Schluckvolumen 59 395 cm 3 /rev 9 Cylindrée 9 Despazamientos Cont Int Maximum Pressure
More informationLSHT Torqmotors and Nichols Motors 700 Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica Displacements Series (3. 1.9 in 3 /rev) Schluckvolumen 59 11 cm 3 /rev Cylindrée Parallel (7. 5.8 in 3 /rev) Despazamientos 118
More informationLSHT Torqmotors and Nichols Motors 716 Series / Serie / Série. Technical Information /Technische Information / Segni / Informacion Tecnica
Technical Information /Technische Information / Segni / Informacion Tecnica 6 Displacements Series (3.6 12.9 in 3 /rev) 6 Schluckvolumen 59 211 cm 3 /rev 6 Cylindrée Parallel (7.2 25.8 in 3 /rev) 6 Despazamientos
More informationTechnical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica 15 Displacements (2.2 24. in 3 /rev) 15 Schluckvolumen 36... 39 cm 3 /rev 15 Cylindrée 15 Despazamientos Cont Int Maximum Pressure
More informationTechnical Information /Technische Information / Segni/Informacion Tecnica. LSHT Torqmotors and Nichols Motors TG Series / Serie / Série
Technical Information /Technische Information / Segni/Informacion Tecnica 3 Displacements (8.6 to 58.5 in 3 /rev) 3 Schluckvolumen 4... 959 cm 3 /rev 3 Cylindrée 3 Despazamientos Maximum Pressure (3 psid)
More informationLSHT Torqmotors TM and Nichols TM Motors zm04 TJ Series
Technical Information / Technische Information / Segni / Informacion Tecnica zm4 HY13-159-4/,EU 14 Displacements (2.5 24. in 3 /rev) 14 Schluckvolumen 41... 39 cm 3 /rev 14 Cylindrée 14 Despazamientos
More informationLSHT Torqmotors TM and Nichols TM Motors TF Series
Technical Information /Technische Information / Segni/Informacion Tecnica 11 Displacements (4.9-29.1 in 3 /rev) 11 Schluckvolumen 81... 477 cm 3 /rev 11 Cylindrée 11 Despazamientos Cont. Int. Maximum Pressure
More informationHydraulics. Technical Information /Technische Information / Segni/Informacion Tecnica. Low Speed High Torque Hydraulic Motors TF Series
Technical Information /Technische Information / Segni/Informacion Tecnica 11 Displacements (4.9-29.1 in 3 /rev) 11 Schluckvolumen 81... 477 cm 3 /rev 11 Cylindrée 11 Despazamientos Cont. Int. Maximum Pressure
More informationLSHT Torqmotors TM and Nichols TM Motors zm07 TH Series
Technical Information /Technische Information / Segni/Informacion Tecnica 13 Displacements (8.6 to 58.5 in 3 /rev) 13 Schluckvolumen 141... 959 cm 3 /rev 13 Cylindrée 13 Despazamientos Cont. Int. Maximum
More informationHydraulics. Technical Information / Technische Information / Segni / Informacion Tecnica
Technical Information / Technische Information / Segni / Informacion Tecnica TE Series / Serie / Série HY13-1553-1/N,EU 14 Displacements (2.5 24. in 3 /rev) 14 Schluckvolumen 45... 39 cm 3 /rev 14 ylindrée
More informationTechnical Information /Technische Information / Segni/Informacion Tecnica. LSHT Torqmotors and Nichols Motors TK Series / Serie / Série
Technical Information /Technische Information / Segni/Informacion Tecnica 7 Displacements (15.3 to 61. in 3 /rev) 7 Schluckvolumen 25... 1 cm 3 /rev Cylindrée 7 Despazamientos Maximum Pressure ( psid)
More informationLSHT Torqmotors TM and Nichols TM Motors zm08 TK Series
Technical Information /Technische Information / Segni/Informacion Tecnica 7 Displacements (15.3 to 61. in 3 /rev) 7 Schluckvolumen 25... 1 cm 3 /rev Cylindrée 7 Despazamientos Cont. Int. Maximum Pressure
More informationTechnical Information /Technische Information / Segni / Informacion Tecnica 7 Displacements (3.6 16.4 in 3 /rev) 7 Schluckvolumen 59 269 cm 3 /rev 7 Cylindrée 7 Despazamientos Cont Int Maximum Pressure
More informationCAUTION! Exceptional Strength and Durability in a High Performance Motor/Brake Package
Technical Information /Technische Information / Segni/Informacion Tecnica 13 Displacements (8.6 to 58.5 in3/rev) 13 Schluckvolumen 141... 959 cm 3 /rev 13 Cylindrée 13 Despazamientos Cont. Int. Maximum
More informationHydraulics. Low Speed High Torque Brake Motors BH Series. Technical Information /Technische Information / Segni/Informacion Tecnica C204
Technical Information /Technische Information / Segni/Informacion Tecnica 12 Displacements (8.6 to 58.5 in 3 /rev) 12 Schluckvolumen 140... 958 cm 3 /rev 12 ylindrée 12 Despazamientos ont. Int. Maximum
More informationHydraulics. Low Speed High Torque Brake Motors BG Series. Technical Information /Technische Information / Segni/Informacion Tecnica C170
Technical Information /Technische Information / Segni/Informacion Tecnica 12 Displacements (8.6 to 58.5 in 3 /rev) 12 Schluckvolumen 140... 960 cm 3 /rev 12 ylindrée 12 Despazamientos ont. Int. Maximum
More informationÀ cylindrée fixe Gamme MAP 50
pplications Moteur à pistons axiaux M+S À cylindrée fixe Gamme MP Cylindrée de 6,6 à cm Vitesse de rotation maxi de tmin Couple maxi danm Puissance maxi 6 Kw ébit d huile maxi : 9 lmin Charge axiale maxi
More informationMotors & Pumps- Hydraulic Pumps, Motors & Power Units
- Hydraulic umps, Motors & ower Units - Rapid Response...12-1 12-6 Hydraulic umps - Check Valves...12-7 Hydraulic umps - ower Units...12-8 12-9 12MOTORS & UMS Hydraulic umps - Vane ump...12-10 Motors...12-11
More informationYMSY. Advanced design in disc distribution flow,which can automatically compensate in operating with high volume efficiency and long life.
The series motors adapts an advanced ROLLER gear set designed with disc distribution flow and high pressure. This motor series uses the ROTOR gear type manufactured with most advanced technology and quality
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4)
Gerolor Motors S Series Size CC-A Flange Options-B Shaft Options-C Ports Features S S S S S S S S2 2 S31 31 S0 0 SAE A 2 Bolt - (H2) 4 Bolt Magneto (H6) 4 Bolt Square (H4) 1.0" Keyed (R) mm Keyed (A) 1.0'
More informationC9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT. Usage Guide 2. BMM Series Hydraulic Motors 3. BMP Series Hydraulic Motors 11
C9: BMM, BMP, BMR, BMH, BMJ Series & Valves CONTENT Usage Guide 2 BMM Series Hydraulic Motors 3 BMP Series Hydraulic Motors 11 BMR Series Hydraulic Motors 24 BMH Series Hydraulic Motors 35 BMJ Series Hydraulic
More informationYMTE SPECIFICATION DATA
SPECIFICATION DATA For individual motor performance charts consult equivalent YMT series data DISTRIBUTION TYPE GEOMETRIC DISPLACEMENT MAX. SPEED RPM MAX. TORQUE [IN. LB.] N*M MAX. OUTPUT [HP] KW MAX.
More informationUS version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
More informationMobile Hydraulic Pumps T6G, T67G, T6ZC. Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6G, T67G, T6ZC Denison Vane Technology, fixed displacement aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing
More informationHydraulic Motor & Brake
SERIES 500-501 - 510-511 - 520-521 - 530-531 - 50-51 - MEDIUM DUTY Hydraulic Motor & rake RE RE (ll Series) For Medium Duty pplications Overview series descriptions RE Series motors offer the perfect compromise
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationTorqmotor Series TF/TG/TH/TK
Sepehr Hydraulic Asia Series TF/TG/TH/TK max. 49 kw Catalogue HY11-3213/EU Ed. 06 / 2003 Series DE Hinweis Die in diesem Katalog oder in Form anderer Informationen durch die Parker Hannifin GmbH, ihre
More informationHYDRAULIC MOTORS GENERAL INFORMATION
GENERAL INFORMATION MGL... Document: HM-1-Dec 2012 Applications: -Agricultural harvesters and seeders -Conveyors -Machine tools -Food industries -Turn equipment -Brush drivers -Sweepers and floor polishers
More informationMOMV SERIES HYDRAULIC MOTOR
MOMV SERIES HYDRAULIC MOTOR MOMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction
More informationMJ SERIES LOW SPEED HIGH TORQUE MOTORS
MJ SERIES LOW SPEED HIGH TORQUE MOTORS HIGH EFFICIENCY TORQUE MOTORS The MJ Series Low Speed High Torque Motor is available in 10 displacement sizes. The MJ Series motor is constructed using heavy-duty
More information镇江液压件厂有限责任公司 BMV SERIES HYDRAULIC MOTOR BMV 315 BMV 400 BMV 500 BMV 630 BMV 800 BMV
BMV SERIES HYDRAULIC MOTOR BMV series motor adapt the advanced Geroler gear set designed with disc distribution flow and high pressure.the unit can be supplied the individual variant in operating multifunction
More informationOMP Hydraulic Motor Versions
Versions VERSIONS Mounting flange Shaft Port size European version US version Side port version End port version Flange port version G 1 /2 X X X No No OMP Cyl. 25 mm G 1 /2 X X X Yes No OMP G 1 /2 X X
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationCROSS HYDRAULICS PTY LTD SECTION
OVERVIEW The motor series is an economical alternative to more complex geroler designs that still provides high efficiency across a wide performance range. These motors are intended for medium-duty applications
More informationHydraulic Motor Model BMK6
Hydraulic Motor Model BMK6 Crossover to Char-ynn 6000 Series gear set design with multifunctional operations in accordance with the application requirements. The output shaft tapered roller bearings permit
More informationMOTOR SCM M2
MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.
More informationIndustrial Hydraulic Pumps T7DBB, T7DBBS. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Industrial T7DBB, T7DBBS Denison Vane Technology, fixed displacement Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing our parts to keep you
More informationMobile Hydraulic Pumps T6DCM, T6DCP, T6DCMW. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6DCM, T6DCP, T6DCMW Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators
More informationSCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.
SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor
More informationHydraulic Motor Model BMSY
UID CMPNENTS, INC. Hydraulic Motor Model The series motor adapts the advanced gear set design with multifunctional operations in accordance with the application requirements. The output shaft tapered roller
More informationGEAR PUMPS DIMENSIONAL DETAILS
DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationCOMPANY STANDARD SPECIAL POWER UNIT APPLICATIONS
COMPANY STANDARD SPECIAL POWER UNIT APPLICATIONS www.sternhidraulica.com Características técnicas Technical characteristics Los actuadores rotativos generan un par de torsión a través de una rueda dentada
More informationMobile Hydraulic Pumps T6DCCM. We are doing our parts to keep you moving! Denison Vane Technology, fixed displacement
Mobile Hydraulic Pumps T6DCCM Denison Vane Technology, fixed displacement Hydraulic Pumps Hydraulic Motors Hydraulic Valves Hydraulic Cylinders Hydraulic Filtration Hydraulic Accumalators We are doing
More informationWide range of hydraulic motors & valves BM2 BM1 H PORT BM1 LINE PORT BM1 S PORT HMM BM4 BM3 WHEEL MOTOR MOTOR WITH SPEED SENSOR
Wide range of hydraulic motors & valves BM2 BM1 H PORT BM1 LINE PORT BM1 S PORT HMM BM4 BM3 WHEEL MOTOR MOTOR WITH SPEED SENSOR 4K BM5 BEARINGLESS BM5 BMT BM6 BEARINGLESS BM6 MOTOR BALANCE VALVE MOTOR
More informationSpool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds.
Spool Valve Hydraulic Motors Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i Spool Valve Motors Highlights Product Description Char-Lynn spool
More informationTorque. Motor model R
MA series motors CHARACTERISTICS OF THE MA SERIES MOTORS (SAE Motor model Displacement Continuous max. speed (1 Intermittent max. speed (1 Max. flow absorbed Torque Torque at 350 bar (5100 psi Theoretical
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationINDEX. YOUNG DANFOSS EATON M & S YMM OMM J MLHM YMP OMP - MLHP YMPW - YMR OMR - MLHR YMH - YMSE YMSS OMSS -
INDEX SECTION PAGE YOUNG DANFOSS EATON M & S YMM OMM J MLHM YMP OMP MLHP YMPH OMPW DH H HP YMPW MLHPW YMR OMR MLHR YMRS OMH DS S HR YMH MLHH YMSY OMS 2 ALT MLHS/MLHSY YMSE 2 YMSS OMSS MLHSS YMSJ 2 bearingless
More informationPiston Pumps Series P2 / P3 Variable Displacement
Piston Pumps Series P2 / P3 Variable Displacement Catalogue HY11-2600/UK July 2003 Contents Series P2/P3 Description Technical information 3 Ordering code 4 Control options LA and LB 6 Control options
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 145-146 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WD WD (All Series) whitedriveproducts overview The WD motor series is an economical solution for light duty
More informationSPECIAL HYDRAULIC MOTORS AND MOTOR-BRAKES
SPECIAL HYDRAULIC AND MTRBRAKES CNTENTS Page Hydraulic Motors Series HP... Hydraulic Motors Series HR...11 Hydraulic Motors Series MLHRW...1 Hydraulic Motors Series...2 Hydraulic Motorbrakes Series BHR...3
More informationTorqmotor TM. Series TF / TG / TH / TK max 49 kw Low-speed hydraulic motor
Torqmotor TM Series TF / TG / TH / TK max 49 kw Low-speed hydraulic motor aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationFEATURES SPECIFICATIONS
FETURES 1 Heavy-Duty Drive Link is up to 30% stronger than competitive designs for longer life. 1 2 3 H 2 Three-Zone Orbiting Valve precisely meters oil to produce exceptional volumetric efficiency. 3
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 275-276 - 277-278 - 280-281 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WG WG (ll Series) For Light Duty pplications whitedriveproducts overview The White Drive
More informationChar-Lynn HP 30 Motor
Char-Lynn HP 30 Motor Displacements cm 3 /r (in 3 /r) 344 (21.0) 400 (24.4) 434 (26.5) 480 (29.3) 677 (41.3) Engineered for Performance For the past 45 years, Char-Lynn has been recognized as the industry
More informationVariable Displacement Piston Pumps Series P2/P3. General Information. P3 Series
General Information General Information P2 Series The newly developed variable displacement piston pumps from Parker Hannifin, designated P2, are intended for mobile applications, featuring a very compact
More informationDisc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
More informationEA5506. Electrically Actuated Carbon Steel PN16 Ball Valve. Description
Electrically Actuated Carbon Steel PN16 Ball Valve Direct Mount No Brackets Needed Carbon Steel Body WCB Full Bore DN15-DN100 / 1/2-4" Powerful Electric Actuator Many Optional Extras Offered Seats Description
More informationMODELS BMSY 154 (9.39) 125 (7.63)
MDES BMSY The BMSY series motor adapts the advanced RRTRC gear set design with DISC distribution fl ow and high pressure. These motors can be supplied with various options for multifunctional operations
More informationHPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
SERIES 0-1 - LIHT DUTY Hydraulic Motor RS RS (ll Series) For Light Duty pplications Overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech.
More informationSCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.
Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationP2060 P2075 P2105 P2145 P3105 P3145
Technical Information Technical Features P2 Series Compact design Low noise level Service friendly Reliable Long-lasting Flexible Easy to install High self-priming speed Technical Data P3 Series P2 Series
More information6.3 SIZE 2. Ordering Code External Gear Pump
6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration
More informationAxial Piston Pump Series PV Design 45 Variable Displacement. Catalogue HY /UK February 2007
Design 45 Variable Displacement February 2007 Introduction With thru drive for single and multiple pumps Swash plate type for open circuit Technical Features Low noise level Fast response (eg. PV046: upstroke
More informationSpool Valve Hydraulic Motors Series J
Spool Valve Hydraulic Motors Series J 10.201 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.201 EN EATON_Motoren J Series english J Series Highlights Thrust Bearing Bushing Port B Port
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationBENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3
ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 HPM pag.3 TECHNICAL FEATURES ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 TECHNICAL FEATURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80
More information5.2 MEDIUM HEAVY DUTY SERIES SIZE 3
.2 MEDIUM HEAVY DUTY SERIES SIZE 3 CONTENTS PGI101 Ordering Code.2.1 Medium Heavy Duty Series Technical Information.2.2 Specifications.2.3 Hydraulic fluids.2.4 Viscosity range.2. Temperature range.2.6
More informationCONTENT Axial Piston Motors and Pumps Fixed Displacement. Technical Specification Guide...2. Hydraulic motor MAP Hydraulic motor MAP50...
CONTENT CONTENT Aial Piston Motors and Pumps Fied Displacement PAGE Technical Specification Guide...2 Hydraulic motor...6 Hydraulic motor MAP5...1 Hydraulic motor MAP1...2 MAP5 Hydraulic pump PAP5...29
More informationHydraulic Motor/Pump Series F11/F12 zp12
Hydraulic Motor/Pump zp12 Fixed Displacement zp11 Catalogue HY17-8249/US March 2004 Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5 psi 1 l...0.264 US gallon 1 cm
More informationTruck Hydraulics. Serie VP1 Variable Displacement Pumps
ruck Hydraulics Variable Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Pump and line
More informationFixed Displacement Motor AA2FM (A2FM)
Fixed Displacement Motor 2FM (2FM) Series 6, for Open and Closed Circuits xial Piston, ent xis Design 5800 psi 6500 psi rueninghaus Hydromatik Sizes 5 1000 Nominal Pressure up to Peak Pressure up to (400
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (E2) 4 Bolt Square (E4)
Gerolor Motors BMRS Series Size CC-A Flange Options-B Shaft Options-C Ports Features 100 100 1 1 1 1 200 200 2 3 2 3 3 3 SAE A 2 Bolt - (E2) 4 Bolt Square (E4) 1-1/4" Keyed (G) 32mm Keyed (B) 1-1/4' 14T
More informationS Series (103-) Highlights
S Series (-) Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet,
More informationJ Series (129-) Highlights
Highlights Features: Constant clearance Geroler set Integrated check valves Thrust Bearing Bushing Port B Port A Self-lubricating shaft bushing High-strength rigid components Increased valve seal lands
More information01 Manillas y tiradores encastrables Flush levers & sliding door pull handles Garnitures de portes coulissantes. Material: AISI 304
for doors 01 Manillas y tiradores encastrables Flush levers & sliding door pull handles Garnitures de portes coulissantes Material: i-4500 cod. backset 53105 70 1 universal design 90 R2,5 180 Incluye
More information4.2 FIXED DISPLACEMENT DOUBLE PUMP
4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range
More informationVeljan Gear Pumps. 'B' Series Features:
'' Series Features: Self-priming pumps Heavy duty sleeve bushing design in a small frame size Displacements from 9.8cc/rev to 39.9cc/rev Working pressures up to bar Speeds up to rpm Flows up to 10.5gpm
More informationHigh Torque Low Speed Motors MR - MRE
High Torque Low Speed Motors MR - MRE Calzoni Radial Piston Technology aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding
More informationAXIAL PISTON MOTORS SHMF
SECTIONAL VIEW Purge relief valve High pressure relief valves (adjustable) Cylinder block assembly Shaft seal Output shaft Valve block Shuttle valve Swashplate 2 SYSTEM CIRCUIT PUMP AND MOTOR CIRCUIT working
More informationHydraulic Motor Model BMV
UID CMPNENTS, INC. MDE BMV 1000 Displacement in 3 /rev (cm 3 /rev) Max Speed rpm Max Torque Max Differential psi 20.32 (333) Hydraulic Motor Model BMV The BMV series motor adapts the advanced gear set
More informationHigh Speed Hydraulic Motors
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA C C225 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed range
More informationHigh Speed Hydraulic Motors. Catalog HY /NA zm16 zm17
High Speed Hydraulic Motors Catalog HY13-20-0-001/NA zm16 zm17 223 Introduction High Speed Features High Starting Torque typically 90% of running torque. Smooth Output Torque throughout the entire speed
More informationS Series (103-) Highlights B-3. Description. Specifications
Highlights New, improved design! Features: Constant clearance Geroler design Three moving components (gerotor, drive, shaft) Optimized drive running angle Three-zone pressure design (inlet, return and
More informationSize CC-A Flange Options-B Shaft Options-C Ports Features. SAE A 2 Bolt - (E2) 4 Bolt Square (E4)
Gerolor Motors Series ist Price Size CC-A Flange Options-B Shaft Options-C Ports Features 100 100 1 1 1 1 0 0 0 0 3 3 0 0 4 4 SAE A 2 Bolt - (E2) 4 Bolt Square (E4) 1-1/4" Keyed (G) 32mm Keyed (B) 1-1/4'
More informationHYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS
HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...
More informationOrbital Motors OMS, OMT and OMV Orbital Motors
MKING MODERN LIVING POSSIBLE Technical Information Orbital Motors OMS, OMT and OMV Orbital Motors powersolutions.danfoss.com Revision history Table of revisions Date Changed Rev November 214 Converted
More informationDisplacements cm 3 /r [in 3 /r] Design code [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] HP30 Motor
HP30 Motor Design code -003 Displacements cm 3 /r [in 3 /r] 344 [21.0] 400 [24.4] 434 [26.5] 480 [29.3] 677 [41.3] Engineered for performance For the past 55 years, Char-Lynn has been recognized as the
More informationENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
More informationHydraulic Pumps T7 for variable speed drives
FC Hydraulic Pumps T7 for variable speed drives Denison Vane Technology Catalogue HY29-11/UK Content General Information Introduction and product key features 3 Main Technical Data Main table for single
More informationHydraulic Motor Model BMV
APPENDIX HYDRAUIC MTRS HYDRAUIC PUMPS GAUGES & ACCESSRIES UID CMPNENTS, INC. Technical Specifications MDE BMV 315 BMV 400 BMV 500 BMV 630 BMV 800 BMV 1000 Displacement in 3 /rev (cm 3 /rev) Max Speed rpm
More informationIFP BMG HIGH TORQUE LOW SPEED MOTORS
IFP BMG HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International BMG motors provide high output torque from an efficient compact design.motors are available with displacements
More information