SCM DIN. Other advantages:

Size: px
Start display at page:

Download "SCM DIN. Other advantages:"

Transcription

1 SCM DIN SCM DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM DIN is of the bent-axis type with spherical pistons. Other advantages: The design gives a compact motor with few moving parts, high starting torque and high operational reliability. It covers the entire displacement range cmᶟ/rev. with max. pressure bar. High efficiency Smooth operation over the entire speed range Suitable for applications with high angular accelerations due to its high rotary stiffness It s high level of reliability is due to the choice of materials, hardening methods, surface structures and the quality assured manufacturing process. 3201GB Printed: 20/01/ :20:10 - Page 1/8

2 Versions, main data Example SC M W - N - DL4 - L35 - S3 G Line Line SC Sunfab Compact, bent-axis design 1. Type M Motor 2. Displacement Direction of rotation W Independent 4. Sealing N Nitrile 7. Connection cover S1 S2 S3 V1 V2 R1 K3 40 Mount flange vertical * 40 Mount flange horizontal * 40 threaded connection * 90 Mount flange vertical * 90 Mount flange horizontal * Side connections, flanged * Combicover 90 side conn. thread X X X X X X X X X X X X X X - - X X X X X X X X X - - X X X X X X X X X X X X X Mounting flange ISO 7653-D DL4 ø 80 * According to SAE J518 code Shaft DIN 5462 / ISO 14 L35 8x32x Connections G ISO G* X X X X M Metric ** - - X X X X X X X X X U UN*** - - X X X X X X X X X X = Standard, preferred O = Contact Sunfab * Only threaded connections ** Only flanged connections *** Only available for S covers 9. Additional 1 External drainage 10. Speed sensor 00 No speed sensor P1 S1 S2 Prepared for speed sensor Fitted speed sensor type PNP* Fitted speed sensor type NPN* X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X * See separate brochure Speed sensor hall for more information. 3201GB Printed: 20/01/ :20:10 - Page 2/8

3 Motor SCM DIN Displacement cm 3 /rev Working pressure max intermittent max continuous Revolutions max intermittent max continuous min continuous Power max intermittent max continuous bar rpm 0 2 kw Starting torque theoretical value Nm/bar Moment of inertia (x 10-3 ) kg m Max intermittent housing pressure bar Weight kg Intermittent operation refers to a max of 6 seconds per minute, representing e.g. peaks in rotational speed during unloading and acceleration. 3201GB Printed: 20/01/ :20:10 - Page 3/8

4 3201GB Printed: 20/01/ :20:10 - Page 4/8

5 3201GB Printed: 20/01/ :20:10 - Page 5/8

6 3201GB Printed: 20/01/ :20:10 - Page 6/8

7 General instructions SCM DIN Shaft loads The service life of the motor largely depends on the service life of the bearings. These are affected by the operating conditions such as speed, pressure, oil viscosity and degree of purification. F 20 A Optimal angle of attack for radial loads Pressure anti-clockwise rotation Pressure clockwise rotation B 20 F Bearing service life (h) Radial load (N) External loading of the shaft, its size, direction and location also affect the service life of the bearings. If a calculation of bearing service life is required for special applications, contact Sunfab Hydraulics. Installation The motor housing is filled with oil to at least 50% of the volume before start up. The drainage hose is connected to the drainage outlet positioned highest on the motor. The other end is connected below the oil level in the oil tank. Hydraulic fluids High performance oil meeting the specifications of ISO type HM, DIN HLP or better must be used. Min. viscosity 10 cst is required to guarantee lubrication. Ideal viscosity is cst. Pipe dimensions The recommended flow velocity in the pressure line is max 7 m/sec. Filtering Cleanliness ISO norm 4406, code 16/13 is recommended. Useful formulaes Required flow rate Speed Torque Power Q = n = M = P = D x n 1000 x η v Q x 1000 x η v D D x p x η hm 6.3 Q x p x η t 60 litres min. RPM Nm kw D n P Q η v η hm η t M p = displacement, cm 3 rev = revolutions, rev min = power, kw = flow, litre min = volumetric efficiency = hydromechanical efficiency = total efficiency = η v x η hm = torque, Nm = pressure difference between inlet and outlet on the hydraulic motor, MPa 3201GB Printed: 20/01/ :20:10 - Page 7/8

8 WARNING When the motor is in use: 1. Do not touch the pressure pipe 2. Beware of rotating parts 3. The motor and pipes can reach high temperatures Sunfab reserves the right to make changes in design and dimensions without notice. Printing and typesetting errors reserved. Copyright 2015 Sunfab Hydraulics AB. All Rights Reserved. GB - Printed: 20/01/ :20:10 - Page 8/8

SCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics.

SCM ISO. SCM ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 ISO is of the bent-axis type with spherical pistons. The design results in a compact motor

More information

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact

More information

MOTOR SCM ISO

MOTOR SCM ISO MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results

More information

SCM M2. Other advantages:

SCM M2. Other advantages: Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical

More information

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics.

SCM SAE. Other advantages: Sunfab s SCM SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. Sunfab s SCM 010-130 SAE is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 010-130 SAE is of the bent-axis type with spherical pistons. The design results in a compact

More information

MOTOR SCM M2

MOTOR SCM M2 MOTOR SCM 025 108 M2 Sunfab SCM M2 is a range of robust axial piston motors especially suitable for winch-, slewing-, wheeland track drives. Sunfab SCM M2 is of the bent-axis type with spherical pistons.

More information

Fixed Displacement Bent Axis Axial Piston Motors TMB 700

Fixed Displacement Bent Axis Axial Piston Motors TMB 700 HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC

More information

Hydraulic pumps, motors and accessories. The solution for all your hydraulic needs

Hydraulic pumps, motors and accessories. The solution for all your hydraulic needs Hydraulic pumps, motors and accessories The solution for all your hydraulic needs Content Sunfab history 3 Development 4 Production 5 Environment and Quality Assurance 7 Product overview 8 Pumps fixed

More information

Hydraulic pumps, motors and accessories. The solution for all your hydraulic needs

Hydraulic pumps, motors and accessories. The solution for all your hydraulic needs Hydraulic pumps, motors and accessories The solution for all your hydraulic needs Content Sunfab history 3 Product overview 4 Pumps fixed single flow 6 Pumps fixed dual flow 12 Pumps variable flow 18 Motors

More information

Hydraulic pumps, motors and accessories. The solution for all your hydraulic needs

Hydraulic pumps, motors and accessories. The solution for all your hydraulic needs Hydraulic pumps, motors and accessories The solution for all your hydraulic needs Content Sunfab history 3 Product overview 4 Pumps fixed single flow 6 Pumps fixed dual flow 12 Pumps variable flow 18 Motors

More information

Pump SCP / SCPT 090,130 DIN, SAE

Pump SCP / SCPT 090,130 DIN, SAE 3118 GB Pump SCP 012-108 / SCPT 090,130 DIN, SAE Sunfab SCP and SCPT are range of piston pumps of a bent axis design with fixed displacement for demanding mobile hydraulics. It covers the whole displacement

More information

5.2 MEDIUM HEAVY DUTY SERIES SIZE 3

5.2 MEDIUM HEAVY DUTY SERIES SIZE 3 .2 MEDIUM HEAVY DUTY SERIES SIZE 3 CONTENTS PGI101 Ordering Code.2.1 Medium Heavy Duty Series Technical Information.2.2 Specifications.2.3 Hydraulic fluids.2.4 Viscosity range.2. Temperature range.2.6

More information

5.1 MEDIUM HEAVY DUTY SERIES SIZE 2

5.1 MEDIUM HEAVY DUTY SERIES SIZE 2 .1 MEDIUM HEAVY DUTY SERIES SIZE 2 CONTENTS PGI100 Ordering Code.1.1 Medium Heavy Duty Series Technical Information.1.2 Specifications.1.3 Hydraulic fluids.1.4 Viscosity range.1. Temperature range.1.6

More information

Fixed Displacement Bent Axis Axial Piston Pumps TPB 70 - TAP 70

Fixed Displacement Bent Axis Axial Piston Pumps TPB 70 - TAP 70 HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC

More information

Axial Piston Fixed Motor A2FM

Axial Piston Fixed Motor A2FM Axial Piston Fixed Motor A2FM RE 91001/06.2012 1/46 Replaces: 09.07 Data sheet Series 6 Size Nominal pressure/maximum pressure 5 315/350 bar 10 to 200 400/450 bar 250 to 1000 350/400 bar Open and closed

More information

BENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3

BENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3 ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 HPM pag.3 TECHNICAL FEATURES ENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO 3019-2 TECHNICAL FEATURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80

More information

Axial piston variable pump A7VO

Axial piston variable pump A7VO Axial piston variable pump A7VO RE 92203/06.09 1/52 Replaces: 05.99 Data sheet Series 63 Sizes NG250 to 500 Nominal pressure 350 bar Peak pressure 400 bar Open circuit Contents Type code for Standard program

More information

Axial Piston Fixed Pump A17FNO Series 10

Axial Piston Fixed Pump A17FNO Series 10 Axial Piston Fixed Pump A17FNO Series 10 RE 91510 Issue: 06.2012 Replaces: 03.2010 Size 125 Nominal pressure 250 bar Maximum pressure 300 bar For commercial vehicles Open circuit Features Fixed pump with

More information

Series TMM Axial Piston Motor. Technical Information

Series TMM Axial Piston Motor. Technical Information Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer

More information

Variable displacement axial piston pumps,

Variable displacement axial piston pumps, Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350

More information

1.3 HIGH PRESSURE SERIES

1.3 HIGH PRESSURE SERIES 1.3 HIGH PRESSURE SERIES content Ordering Code 1.3.1 High Pressure Series Technical Information 1.3.2 Specifications 1.3.3 Hydraulic Fluids 1.3.4 Viscosity Range 1.3.5 Temperature Range 1.3.6 Seals 1.3.7

More information

Axial Piston Fixed Pump A2FO

Axial Piston Fixed Pump A2FO Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A2FO RE 91401/03.08 1/24 Replaces: 09.07 Technical data sheet eries 6 izes Nominal

More information

Truck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps

Truck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps Series F1, F2, T1 Fixed Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Hydraulic Pumps,

More information

6.3 SIZE 2. Ordering Code External Gear Pump

6.3 SIZE 2. Ordering Code External Gear Pump 6.3 SIZE 2 CONTENTS PGE12 Ordering Code 6.3.1 External Gear Pump Technical Information 6.3.2 Specifications 6.3.3 Hydraulic fluids 6.3.4 Viscosity range 6.3.5 Temperature range 6.3.6 Seals 6.3.7 Filtration

More information

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement Hydraulic Motor/Pump Series F11/F12 Fixed Displacement Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5 psi 1 l...0.264

More information

Radial piston hydraulic motor Hägglunds CAb

Radial piston hydraulic motor Hägglunds CAb Radial piston hydraulic motor Hägglunds CAb RE 15354 Edition: 12.2016 Replace: 01.2015 Frame Size: CAb 10, 20, 30, 40 Displacement: 503 2 513 cm 3 /rev [31-153 in 3 /rev] Specific torque: 8 40 Nm/bar [407

More information

Fixed Displacement Motor A2FM

Fixed Displacement Motor A2FM rueninghaus Hydromatik Series 6, for use in open and closed circuits xial tapered piston - bent axis design Sizes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91001/01.97 RE 91001/01.97

More information

Fixed Displacement Pump A2FO

Fixed Displacement Pump A2FO RE 91401/01.97 Brueninghaus Hydromatik eries 6, for open circuits Axial tapered piston - bent axis design izes 5...1000 Nom. Pressure up to 400 bar Peak Pressure up to 4 bar RE 91401/01.97 replaces 11.95

More information

Hydraulic Motor/Pump Series F11/F12 zp12

Hydraulic Motor/Pump Series F11/F12 zp12 Hydraulic Motor/Pump zp12 Fixed Displacement zp11 Catalogue HY17-8249/US March 2004 Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5 psi 1 l...0.264 US gallon 1 cm

More information

Axial Piston Pump Series PV Design 45 Variable Displacement. Catalogue HY /UK February 2007

Axial Piston Pump Series PV Design 45 Variable Displacement. Catalogue HY /UK February 2007 Design 45 Variable Displacement February 2007 Introduction With thru drive for single and multiple pumps Swash plate type for open circuit Technical Features Low noise level Fast response (eg. PV046: upstroke

More information

PVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS

PVE /117 ED VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT SERIES 30 OPERATING PRINCIPLE TECHNICAL SPECIFICATIONS 14 110/117 ED PVE VARIABLE DISPLACEMENT VANE PUMPS WITH DIRECT PRESSURE ADJUSTMENT OPERATING PRINCIPLE The PVE pumps are variable displacement vane pumps with direct pressure regulator. The pump group

More information

Axial piston fixed motor A2FM series 70. Americas. RE-A Edition:

Axial piston fixed motor A2FM series 70. Americas. RE-A Edition: Axial piston fixed motor A2FM series 70 Americas RE-A 91071 Edition: 05.2015 A2FMN (Sizes 90 and 107): Nominal pressure 300 bar Maximum pressure 350 bar A2FMM (Sizes 80 and 90): Nominal pressure 400 bar

More information

TPF 60 (36,16 49,94 cm³/rev.)

TPF 60 (36,16 49,94 cm³/rev.) HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design

Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design Fixed Displacement Pump A4FO Series 10 Axial Piston Unit, Swashplate Design Sizes 71 0 Nominal pressure 3 bar Peak pressure 400 bar RE 91455/01.94 RE 91455/01.94 Replaces 07.88 Other fixed displacement

More information

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5

More information

Axial piston fixed motor A2FM Series 70 A2FE Series 70

Axial piston fixed motor A2FM Series 70 A2FE Series 70 Axial piston fixed motor A2FM Series 70 A2FE Series 70 RE 91071 RE Edition: 910712.2015 Edition: Replaces 12.2015 03.2015 A2FMN, A2FEN (sizes 56 to 107): Nominal pressure 300 bar Maximum pressure 350 bar

More information

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5

More information

Hydraulic Motor Series V12 Variable Displacement

Hydraulic Motor Series V12 Variable Displacement Variable Displacement Catalog 9129 8217-02 June, 1998 GB Content General information 3 V12 cross section 3 Specifications 4 Efficiency diagrams 5 Ordering codes 6 Installation dimensions - ISO version

More information

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde

Hydraulic Motor/Pump. Series F11/F12 Fixed Displacement. parker.com/pmde Hydraulic Motor/Pump Series F11/F12 Fixed Displacement parker.com/pmde Series F11/F12 Torque (M) M = D x p x η hm 63 [Nm] Conversion factors 1 kg... 2.20 lb 1 N... 0.225 lbf 1 Nm... 0.738 lbf ft 1 bar...14.5

More information

RE 91808/ AA4VSE Plug-in dual displacement motor. High pressure range. Series 10 Axial piston swashplate design, SAE model

RE 91808/ AA4VSE Plug-in dual displacement motor. High pressure range. Series 10 Axial piston swashplate design, SAE model AA4VSE Plug-in dual displacement motor Series Axial piston swashplate design, SAE model RE 91808/09.90 RE 91808/09.90 Brueninghaus Hydromatik Size 250 Nominal pressure 350 bar Peak pressure 400 bar High

More information

HYDRAULIC MOTORS EPMS - series 3

HYDRAULIC MOTORS EPMS - series 3 HYDRAULIC EPMS - series APPLICATION» Conveyors» Metal working machine» Machines for agriculture» Road building machines» Mining machinery» Food industries» Special vehicles etc. CONTENTS Specification

More information

Axial piston variable pump (A)A4VSO

Axial piston variable pump (A)A4VSO Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit

More information

Fixed Displacement Motor AA2FM (A2FM)

Fixed Displacement Motor AA2FM (A2FM) Fixed Displacement Motor 2FM (2FM) Series 6, for Open and Closed Circuits xial Piston, ent xis Design 5800 psi 6500 psi rueninghaus Hydromatik Sizes 5 1000 Nominal Pressure up to Peak Pressure up to (400

More information

GEAR PUMPS DIMENSIONAL DETAILS

GEAR PUMPS DIMENSIONAL DETAILS DIMENSIONAL DETAILS OUTLET INLET TYPE DISPLACEMENT CM 3 /REV FLOW AT 1500 REV/MIN MAX. WORKING PRESSURE MAX. SPEED DIMENSIONS MM P1 P2 P3 RPM L M D2 1.4 2.0 270 290 310 6000 40 79 D3 2.1 2.9 270 290 310

More information

Hydraulic Motor/Pump Series F11/F12

Hydraulic Motor/Pump Series F11/F12 Hydraulic Motor/Pump Fixed Displacement Catalogue HY30-8249/UK October 2006 Basic formulas for hydraulic motors Flow (q) D x n q = 1000 x η [l/min] v Torque (M) M = D x p x η hm 63 Power (P) q x p x η

More information

Axial Piston Variable Double Pump A8VO

Axial Piston Variable Double Pump A8VO Axial Piston Variable Double Pump A8VO RE 93010/03.09 1/40 Replaces: 11.07 Data sheet Series 61 / 63 Sizes 55...200 Nominal pressure 350 bar Peak pressure 400 bar for open circuit Contents Ordering Code

More information

Instruction manual. Installation requirements. Power Take-Off. Pump mounting: Spline shaft DIN 5462 / ISO 14. Mounting flange ISO 7653-D.

Instruction manual. Installation requirements. Power Take-Off. Pump mounting: Spline shaft DIN 5462 / ISO 14. Mounting flange ISO 7653-D. GB PUMP SCPD 76/76 DIN Instruction manual Thank you for choosing Sunfab You have chosen SCPD 76/76, a dual flow pump with the highest displacement-to-size-ratio on the market. It can effectively be directly

More information

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Design and Function 7 6 5 9 2 5 6 7 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing

More information

Radial piston motors for industrial applications MCR-D

Radial piston motors for industrial applications MCR-D Radial piston motors for industrial applications MCR-D MCR-E RE 15196 Edition: 02.2017 Replaces: 12.2013 MCR-D Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450

More information

Axial piston variable pump A4VG Series 32. Europe. RE-E Edition: Replaces:

Axial piston variable pump A4VG Series 32. Europe. RE-E Edition: Replaces: Axial piston variable pump A4VG Series 32 Europe RE-E 92003 Edition: 04.2016 Replaces: 06.2012 High-pressure pump for applications in a closed circuit Size 28 to 125 Nominal pressure 400 bar Maximum pressure

More information

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries HYDRAULIC HW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS

More information

TXV - Characteristics

TXV - Characteristics TXV - Characteristics TXV pumps are available in 11 models from to 150 cc/rev maximum displacement. Pump reference Direction of rotation Maximum displac. (1) Max. operating pressure Max. peak pressure

More information

Axial Piston Fixed Displacement Pump KFA

Axial Piston Fixed Displacement Pump KFA Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Axial Piston Fixed Displacement Pump KFA RE 91 501/06.03 1/12

More information

Hydraulic Pump Series F1plus Fixed Displacement

Hydraulic Pump Series F1plus Fixed Displacement Fixed Displacement Catalog 9129 8218-02 February 1999, GB Content General information, design 3 Specifications 4 Pump cross section 4 Pump and line selection 5 Ordering code 6 Standard versions 6 Installation

More information

Fixed Displacement Plug-In Motor A2FE

Fixed Displacement Plug-In Motor A2FE Industrial Hydraulics Electric Drives and Controls Linear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics Fixed Displacement Plug-In Motor 2FE RE 9008/03.97 replaces 04.96

More information

Radial piston motor for integrated drives MCR-H

Radial piston motor for integrated drives MCR-H Radial piston motor for integrated drives MCR-H RE 15199 Edition: 03.2017 Replaces: 12.2013 Frame size MCR3, MCR5, MCR10, MCR15, MCR20 Displacement 160 cc to 3000 cc Differential pressure up to 450 bar

More information

TMF 600 ( cm³/rev.)

TMF 600 ( cm³/rev.) HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415

More information

Radial piston motor for frame integrated drives MCR-A

Radial piston motor for frame integrated drives MCR-A Radial piston motor for frame integrated drives MCR-A RE 15195 Edition: 12.2013 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530

More information

Radial piston motor for compact drives MCR-C

Radial piston motor for compact drives MCR-C Radial piston motor for compact drives MCR-C RE 15197 Edition: 02.2017 Replaces: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm

More information

Axial Piston Fixed Pump A17FNO

Axial Piston Fixed Pump A17FNO Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A17FNO RE 91510/03.10 1/12 Data sheet eries 10 ize 125 Nominal pressure 250 bar

More information

Axial piston units A10FZO, A10VZO and A10FZG, A10VZG Series 10 for variable-speed drives

Axial piston units A10FZO, A10VZO and A10FZG, A10VZG Series 10 for variable-speed drives Axial piston units A10FZO, A10VZO and A10FZG, A10VZG Series 10 for variable-speed drives RE 91485 Edition: 10.2016 Replaces: 06.2011 For variable-speed operation with synchronous and asynchronous motors

More information

Radial piston motor for heavy duty wheel drives MCR-W

Radial piston motor for heavy duty wheel drives MCR-W Radial piston motor for heavy duty wheel drives MCR-W RE 15200 Edition: 09.2015 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530

More information

Axial piston fixed pump A17FO Series 10

Axial piston fixed pump A17FO Series 10 Axial piston fixed pump A17FO eries 10 E 91520 Issue: 11.2015 eplaces: 10.2014 High-pressure pump for use in commercial vehicles izes 23 to 107 Nominal pressure/maximum pressure 350/400 bar Bent-axis design

More information

Ordering Code of 2PBA Pumps

Ordering Code of 2PBA Pumps Ordering Code of 2PBA Pumps Pump Code 3 Displacement ( cm ) Direction of Version Sealing Inlet Fittings 2PBA 18 L S N A A Suction Fittings Included N Nitrile V Viton S Special Version C Classic Version

More information

Axial piston fixed motor A2FM for explosive areas II 2G ck IIB Tx

Axial piston fixed motor A2FM for explosive areas II 2G ck IIB Tx xial piston fixed motor 2FM for explosive areas II 2G ck II Tx Part II of instruction manual according to TEX directive 2014/34/EU data sheet RE 91001-01-X-2 Edition: 04.2016 Replaces: 01.2016 Series 61

More information

Radial piston motor for track drives MCR-T

Radial piston motor for track drives MCR-T Radial piston motor for track drives MCR-T RE 15221 Edition: 03.2017 Replaces 07.2015 Frame size MCR5, MCR6, MCR10 Displacement 620cc to 1340cc Differential pressure up to 400 bar Torque output up to 8530

More information

Axial piston fixed pump A17FNO Series 10

Axial piston fixed pump A17FNO Series 10 Axial piston fixed pump A17FNO eries 10 E 91510 Issue: 11.2015 eplaces: 06.2012 Designed for use in commercial vehicles with standard pressure requirements ize 125 Nominal pressure/maximum pressure 250/300

More information

Axial Piston Variable Pump A2VK

Axial Piston Variable Pump A2VK Axial Piston Variable Pump A2VK RE 94001/06.10 1/12 Replaces: 07.04 Data sheet Size 12 to 107 Series 1 and 4 Nominal pressure 250 bar Maximum pressure 315 bar Version for pumping plastic components Contents

More information

IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet

IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet IPCA Medium-pressure Internal Gear Pumps Technical Data Sheet Design and Function 1 7 6 5 9 2 6 5 7 8 2 1 4a 4b 3 1 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b Filler sealing

More information

RA / Radial Piston Motor Model MR, MRE Fixed Displacement. Table of Contents. Replaces: RA /10.95

RA / Radial Piston Motor Model MR, MRE Fixed Displacement. Table of Contents. Replaces: RA /10.95 Radial Piston Motor Model MR, MRE Fixed Displacement Sizes 160 to 9500 6100 PSI (up to 420 bar) 582 in 3 (up to 9542 cm 3 ) 25,075 lb-ft (up to 34000 Nm) RA 15 228/10.95 Replaces: 12.94 Wide range of displacements

More information

HYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS

HYDRAULIC MOTORS MM APPLICATION OPTIONS CONTENTS GENERAL MOTORS HYDRAULIC APPLICATION Conveyors Textile machines Mining machinery Machine tools Ventilators Construction plant equipment and access platforms etc. CONTENTS Specification data... 5 Function diagrams...

More information

BENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3

BENT AXIS PISTON MOTORS SERIES HPM FLANGE ISO HPM. pag.3 ENT XIS PISTON MOTORS SERIES HPM FLNGE ISO 30-2 HPM pag.3 TECHNICL FETURES ENT XIS PISTON MOTORS SERIES HPM FLNGE ISO 30-2 TECHNICL FETURES Displacement cm 3 /rev 12 17 25 34 40 47 55 64 80 90 108 130

More information

Radial piston motor for compact drives MCR-C

Radial piston motor for compact drives MCR-C Radial piston motor for compact drives MCR-C RE 15197 Edition: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm Speed up to 125

More information

xxx displacement pumps TXV for trucks

xxx displacement pumps TXV for trucks Variable xxx xxx displacement pumps TXV for trucks 1 sommaire why use a variable displacement pump?... 3 your hydraulic equipment.................. 4 load-sensing.... 5 variable displacement... 6 TXV 40

More information

Vane Pumps. VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi)

Vane Pumps. VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi) Vickers Vane Pumps VMQ Series Vane Pumps For Industrial and Mobile Applications Displacements to 215 cm 3/ r (13.12 in 3 /r) Pressures to 260 bar (3800 psi) 5008.00/EN/0596/A A.25 Introduction From the

More information

Variable Displacement Plug-In Motor A6VE

Variable Displacement Plug-In Motor A6VE Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics Service Variable Displacement Plug-In Motor A6VE RE 91 606/06.05 1/16 Replaces: 05.99 echnical data sheet Series

More information

Hydraulic Fixed Piston Rexroth A2FE Motor

Hydraulic Fixed Piston Rexroth A2FE Motor Hydraulic Fixed Piston Rexroth A2FE Motor Series 6, axial tapered piston, bent axis design for mounting in mechanical gearboxes Pressure up to 400 bar Peak Pressure up to 450 bar he fixed displacement

More information

Variable displacement axial piston pumps,

Variable displacement axial piston pumps, LVP 04 T E Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar

More information

2-Circuit Axial Piston Fixed Pump A18FDO

2-Circuit Axial Piston Fixed Pump A18FDO Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice 2-Circuit Axial Piston Fixed Pump A18FDO E 91540/03.10 1/12 eplaces: 06.09 Data sheet eries 10 ize 63,

More information

HYDRAULIC-MOTORS. Radial Piston Motors with fixed displacement RM...X series V g = 250 cm 3 /rev cm 3 /rev

HYDRAULIC-MOTORS. Radial Piston Motors with fixed displacement RM...X series V g = 250 cm 3 /rev cm 3 /rev s with fixed displacement RM...X series V g = 250 cm 3 /rev - 900 cm 3 /rev HYDRAULIC-MOTORS Catalogue No. HM1-015E RM 250X - RM 900X Page 2 Features: many displacements for all applications very high

More information

PUMP SCPD 56/26 DIN BY-PASS

PUMP SCPD 56/26 DIN BY-PASS GB INSTRUCTION MANUAL THANK YOU FOR CHOOSING SUNFAB You have chosen SCPD 56/26 DIN, a dual flow pump with differentiated flow suitable for combination vehicles with high power take off ratio and high output

More information

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries

» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries HYDRAULIC RW APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Grass cutting machinery etc. CONTENTS

More information

External gear motor High Performance AZMB

External gear motor High Performance AZMB External gear motor High Performance AZMB RE 14027 Edition: 0.201 Platform B Fixed displacement Sizes 2.5 to 7.1 Continuous pressure up to 220 bar Intermittent pressure up to 2 bar Features Consistently

More information

External gear pump Series G

External gear pump Series G External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps

More information

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet

IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet IPVP High-pressure Internal Gear Pumps for Variable Speed Drives Technical Data Sheet Design and Function 7 6 5 9 2 8 2 9 4a 4b 3 Pinion shaft 2 Internal gear 3 Filler pin 4a Filler segment carrier 4b

More information

Quality. 1. Cam ring 2. Cam roller 3. Piston 4. Shaft coupling Connection block 10. Valve plate 11. Axial bearing 6

Quality. 1. Cam ring 2. Cam roller 3. Piston 4. Shaft coupling Connection block 10. Valve plate 11. Axial bearing 6 Functional description Hägglunds hydraulic industrial motor COMPACT CB is of the radial-piston type with a rotating cylinder block/hollow shaft and a stationary housing. The cylinder block is mounted in

More information

Axial Piston Fixed Motor A2FNM for Fan Drives and Flywheel Mass

Axial Piston Fixed Motor A2FNM for Fan Drives and Flywheel Mass Electric Drives and Controls Hydraulics Linear Motion and ssembly Technologies Pneumatics Service xial Piston Fixed Motor 2FNM for Fan Drives and Flywheel Mass RE 91007/02.11 1/16 Data sheet Series 61

More information

Fixed Plug-In Motor A2FE

Fixed Plug-In Motor A2FE Fixed Plug-In Motor 2FE RE 91 008/09.07 1/16 Replaces: 04.05 echnical data sheet Series 6 Sizes Nominal pressure/peak pressure 28 to 180 400/450 bar 250 and 355 350/400 bar Open and closed circuits Contents

More information

Brochure Hydraulic Pumps, Hydraulic Parts

Brochure Hydraulic Pumps, Hydraulic Parts www.hidrocel.com.tr 2013 Brochure Hydraulic s, Hydraulic Parts Product Group Bent Axis s Piston s PBA s 2PBA s PBX s Gear s PA s PH s Power Take Off HDP s PTO Adapter, Valve, Cardan Shaft www.hidrocel.com.tr

More information

High Pressure Gear Pumps KP 5

High Pressure Gear Pumps KP 5 High Pressure Gear Pumps KP 5 Construction 1 6 2 9 8 4 5 7 3 1 Housing 2 Gearing 3 Drive shaft end 4 Flange cover 5 Roller bearing 6 Sliding plates 7 Lip-type shaft seal 8 Plain bearing 9 Housing gasket

More information

External Gear Pumps Series F

External Gear Pumps Series F External Gear Pumps Series F RA 10089/08.11 Replaces: RA 10097 1/60 AZPF-... Fixed pumps Size 4.0...28 cm 3 /rev (.25-1.71 in 3 /rev) Overview of contents Contents Page General 2 Product overview 3 single

More information

Torque. Motor model R

Torque. Motor model R MA series motors CHARACTERISTICS OF THE MA SERIES MOTORS (SAE Motor model Displacement Continuous max. speed (1 Intermittent max. speed (1 Max. flow absorbed Torque Torque at 350 bar (5100 psi Theoretical

More information

4.2 FIXED DISPLACEMENT DOUBLE PUMP

4.2 FIXED DISPLACEMENT DOUBLE PUMP 4.2 FIXED DISPLACEMENT DOUBLE PUMP CONTENTS PVF101 Ordering Code 4.2.1 Fixed Displacement Technical Information 4.2.2 Specifications 4.2.3 Hydraulic fluids 4.2.4 Viscosity range 4.2.5 Temperature range

More information

M7X / M7V Series. Swash Plate Type Axial Piston Motor. Precision Machinery Company

M7X / M7V Series. Swash Plate Type Axial Piston Motor. Precision Machinery Company Precision Machinery Company Swash Plate Type xial Piston Motor M7X / M7V Series QULITY HYDRULICS LTD WHINBNK PRK WHINBNK ROD YCLIFFE INDUSTRIL PRK NEWTON YCLIFFE CO. DURHM DL5 6Y TEL. 01325 317755 FX.

More information

Brueninghaus Hydromatik Rexroth A2FO Pump & A2FM Motor

Brueninghaus Hydromatik Rexroth A2FO Pump & A2FM Motor Brueninghaus Hydromatik Rexroth A2FO Pump & A2FM Motor Open and closed circuits Sizes 10...180 Series 6 Nom. Pressure up to 400 bar Peak Pressure up to 450 bar Features Fixed displacement motor A2FM of

More information

US version. Drain connection

US version. Drain connection Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT

More information

Axial Piston Variable Pump A18VLO Series 11

Axial Piston Variable Pump A18VLO Series 11 Axial Piston Variable Pump A18VLO eries 11 RE 92280 Issue: 06.2012 Replaces: 06.2009 ize 80 Nominal pressure 350 bar Maximum pressure 400 bar For commercial vehicles Open circuit Features Variable pump

More information

Axial piston fixed pump AA2FO

Axial piston fixed pump AA2FO Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial piston fixed pump AA2FO RA-A 91401/07.2014 1/32 Replaces: 03.08 Data sheet eries 6 izes Nominal pressure/maximum

More information

Gear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs

Gear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of

More information

Fixed Displacement Motor A10FM A10FE

Fixed Displacement Motor A10FM A10FE Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service Fixed Displacement Motor 10FM 10FE RE 91 172/06.06 1/24 Replaces: 01.03 Technical Data Sheet Size 10...63

More information