Hand Taps For Through or Blind Holes in General Machining Applications
|
|
|
- Buck Wade
- 5 years ago
- Views:
Transcription
1 TECHICAL IFORATIO & IDEX GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS or Blind Holes in General achining Applications, achine Screw and Fractional Sizes Taper Chamfer 7 to 10 itches Series o. 5305S / 5303S Steam Oxide Series o / 5303 Uncoated For Deep Blind Hole Tapping ACHIE SCREW ED umber - Taper Chamfer itch Dia. Oxide D1 UJC UJF L L3 D Flutes Limit Uncoated H H H H H H H H H H H H H H H H H H H H H H H H H H H Hand taps for 3B class of fit are suitable for UJ Aerospace internal threading applications. Taper chamfer fractional sizes continue on the next page. Stainless on-ferrous Greenfield LIGHTIG SERVICE Available 72
2 (continued), achine Screw and Fractional Sizes Taper Chamfer 7 to 10 itches Series o. 5305S / 5303S Steam Oxide Series o / 5303 Uncoated For Deep Blind Hole Tapping or Blind Holes in General achining Applications FRACTIOAL ED umber - Taper Chamfer itch Dia. D1 UJC UJF L L3 D Flutes Limit Oxide Uncoated 1/ H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H H H H / H / H / H / H / H / H / H / H Hand taps for 3B class of fit are suitable for UJ Aerospace internal threading applications. lug chamfer machine screw sizes begin on the next page. Stainless on-ferrous GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS TECHICAL IFORATIO & IDEX 73
3 TECHICAL IFORATIO & IDEX GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS or Blind Holes in General achining Applications, achine Screw and Fractional Sizes lug Chamfer 3 to 5 itches Series o. 5305TC / 5303TC TiC Coated Series o / 2303 Ti Coated Series o. 5305S / 5303S Steam Oxide Series o / 5303 Uncoated ACHIE SCREW ED umber - lug Chamfer itch Dia. D1 UJC UJF L L3 D Flutes Limit TiC Ti Oxide Uncoated H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H Hand taps for 3B class of fit are suitable for UJ Aerospace internal threading applications. H lug chamfer machine screw sizes continue on the next page. Stainless on-ferrous 74
4 (continued), achine Screw and Fractional Sizes lug Chamfer 3 to 5 itches Series o. 5305TC / 5303TC TiC Coated Series o / 2303 Ti Coated Series o. 5305S / 5303S Steam Oxide Series o / 5303 Uncoated or Blind Holes in General achining Applications ACHIE SCREW ED umber - lug Chamfer itch Dia. D1 UJC UJF L L3 D Flutes Limit TiC Ti Oxide Uncoated H H H H H H H H H H H H H H H H FRACTIOAL ED umber - lug Chamfer itch Dia. D1 UJC UJF L L3 D Flutes Limit TiC Ti Steam Oxide Uncoated 1/ H / H / H / H / H / H / H / H / H / H / H / H / H / H / H Hand taps for 3B class of fit are suitable for UJ Aerospace internal threading applications. lug chamfer fractional sizes are continued on the next page. Stainless on-ferrous Greenfield LIGHTIG SERVICE Available GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS TECHICAL IFORATIO & IDEX 75
5 TECHICAL IFORATIO & IDEX GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS or Blind Holes in General achining Applications (continued), achine Screw and Fractional Sizes lug Chamfer 3 to 5 itches Series o. 5305TC / 5303TC TiC Coated Series o / 2303 Ti Coated Series o. 5305S / 5303S Steam Oxide Series o / 5303 Uncoated FRACTIOAL ED umber - lug Chamfer itch Dia. D1 UJC UJF L L3 D Flutes Limit TiC Ti Oxide Uncoated 5/ H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H Hand taps for 3B class of fit are suitable for UJ Aerospace internal threading applications. lug chamfer fractional sizes are continued on the next page. Stainless on-ferrous 76
6 (continued), achine Screw and Fractional Sizes lug Chamfer 3 to 5 itches Series o. 5305TC / 5303TC TiC Coated Series o / 2303 Ti Coated Series o. 5305S / 5303S Steam Oxide Series o / 5303 Uncoated FRACTIOAL or Blind Holes in General achining Applications ED umber - lug Chamfer itch Dia. D1 UJC UJF L L3 D Flutes Limit TiC Ti Oxide Uncoated 5/ H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H H H H H H / H / H / H / H / H / H / H / H Hand taps for 3B class of fit are suitable for UJ Aerospace internal threading applications. Bottoming chamfer machine screw sizes begin on the next page. Stainless on-ferrous GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS TECHICAL IFORATIO & IDEX Greenfield LIGHTIG SERVICE Available 77
7 TECHICAL IFORATIO & IDEX GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS or Blind Holes in General achining Applications, achine Screw and Fractional Sizes Bottoming Chamfer 1 to 2 itches Series o. 5305TC / 5303TC TiC Coated Series o / 2303 Ti Coated Series o. 5305S / 5303S Steam Oxide Series o / 5303 Uncoated ACHIE SCREW ED umber - Bottoming Chamfer itch Dia. D1 UJC UJF L L3 D Flutes Limit TiC Ti Oxide Uncoated H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H H Hand taps for 3B class of fit are suitable for UJ Aerospace internal threading applications. Bottoming chamfer machine screw sizes continue on the next page. Stainless on-ferrous 78
8 (continued), achine Screw and Fractional Sizes Bottoming Chamfer 1 to 2 itches Series o. 5305TC / 5303TC TiC Coated Series o / 2303 Ti Coated Series o. 5305S / 5303S Steam Oxide Series o / 5303 Uncoated or Blind Holes in General achining Applications ACHIE SCREW ED umber - Bottoming Chamfer itch Dia. D1 UJC UJF L L3 D Flutes Limit TiC Ti Oxide Uncoated H H H H H H H H FRACTIOAL ED umber - Bottoming Chamfer itch Dia. D1 UJC UJF L L3 D Flutes Limit TiC Ti Steam Oxide Uncoated 1/ H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H Hand taps for 3B class of fit are suitable for UJ Aerospace internal threading applications. Bottoming chamfer fractional sizes continue on the next page. Stainless on-ferrous GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS TECHICAL IFORATIO & IDEX 79
9 TECHICAL IFORATIO & IDEX GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS or Blind Holes in General achining Applications (continued), achine Screw and Fractional Sizes Bottoming Chamfer 1 to 2 itches Series o. 5305TC / 5303TC TiC Coated Series o / 2303 Ti Coated Series o. 5305S / 5303S Steam Oxide Series o / 5303 Uncoated FRACTIOAL ED umber - Bottoming Chamfer itch Dia. D1 UJC UJF L L3 D Flutes Limit TiC Ti Oxide Uncoated 3/ H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H H H H / H / H / H / H / H / H / H / H Hand taps for 3B class of fit are suitable for UJ Aerospace internal threading applications. Tap sets - one of each taper, plug, and bottoming chamfers begin on the next page. Stainless on-ferrous 80
10 TECHICAL IFORATIO & IDEX GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS or Blind Holes in General achining Applications (continued) Hand Tap Sets, achine Screw and Fractional Sizes One Each Taper, lug, and Bottoming Chamfer Series o / 5303 Uncoated ED umber - Set of One Each FRACTIOAL Taper, lug, Bottoming Chamfer itch Dia. D1 C/UC F/UF L L3 D Flutes Limit Uncoated 1/ H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H / H H H H / H / H / H / H / H / H / H / H Stainless on-ferrous Set of One Each Taper, lug, and Bottoming Chamfer 82
11 TECHICAL IFORATIO & IDEX GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS Taper ipe Taps For General urpose Applications Taper ipe Taps T, TF, AT Features/Benefits: manufactured from select highspeed steel ground thread pipe taps are standard in American Standard ipe Form (T) and American Standard Dryseal ipe Thread Form (TF) T threads require the use of a sealer, such as Teflon tape or pipe compound TF dryseal threads provide a pressure-tight joint without the use of sealer the nominal size of a pipe tap is that of the pipe fitting to be tapped, not the actual size of the tap; thread taper is 3/4 per foot alternate tap coatings are available as stock modifications Application Information: steel (TiC, Ti, ) non-ferrous materials (uncoated) cast iron and ductile iron (TiC, Ti) aluminum (Ti+CrC/C) roduction Taper ipe Taps T/AT and TF, Standard ipe Chamfer 2 1/2 to 3 1/2 itches Series o Ti Coated Series o. 5320S Steam Oxide Finish Series o Uncoated Gage easurement Ti Ti ED umber * Large shank. ** ipe tap projection is the distance the small end of the tap projects through an American ational Standard L1 ipe Thread Ring Gage. AT Taps marked T may be used for T and AT applications. Oxide Uncoated Uncoated D1 TI L Length of Thread D Flutes Standard rojection** T/AT TF T/AT T/AT TF 1/ / /8* / / / / / /4 11 1/ /2 11 1/ / on-ferrous Greenfield LIGHTIG SERVICE Available 110
12 Hexagon Rethreading Bolt Dies Features/Benefits: made from carbon steel standard with right hand Unified and American ational thread form available in metric and American ational Taper ipe (T) thread form cost-effective rethreading die Hexagon Rethreading Bolt Dies Series o. 377 Application Information: FRACTIOAL WF Width D1 C/UC F/UF Across Flat L ED umber 1/ /32 1/ / /32 1/ / /16 5/ / /16 5/ / /32 3/ / /32 3/ / /8 7/ / /8 7/ / /16 1/ / /16 1/ / /16 1/ / /16 1/ / /4 5/ / /4 5/ / /16 3/ / /16 3/ / /16 3/ / /16 3/ / /8 7/ / /8 7/ / / / / / / / / / / / / / / / / / use to dress over bruised or rusty threads no special holder required; use standard wrench ideal for maintenance in the shop or in the field Hexagon Rethreading Bolt Dies Series o. 377 Dies Hexagon Rethreading D1 = Thread Size WF = Width Across Flat L = Thickness ETRIC Size WF Width Across Flat L ED umber 5 x 0,8 19/32 1/ x 1 19/32 1/ x 1,25 11/16 5/ x 1,5 7/8 7/ x 1,75 1 1/16 1/ x 2 1 1/16 1/ x 2 1 1/14 5/ x 2,5 1 5/8 7/ Hexagon Rethreading Bolt Dies Series o. 377 T IE D1 Thread itch T WF Width Across Flat L ED umber 1/ /16 3/ / /4 5/ / /16 5/ / /8 3/ / / / GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS TECHICAL IFORATIO & IDEX 131
TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
TAPS AND DIES. American Made American Owned
TAPS AND DIES 2006 American Made American Owned Founded in 1957, Fastcut Tool lives up to its name with America s most extensive, fast-cutting line of roughing end mills. For over five decades, Fastcut
Tap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
Table of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 2 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 4 Standard Taps--High Speed Steel Machine Screw
Table of Contents. Standard Taps
Table of Contents Standard Taps Standard Taps--High Speed Steel Machine Screw Sizes... 3 Standard Taps--High Speed Steel Hand Taps (Fractional Sizes)... 5 Standard Taps--High Speed Steel Machine Screw
member sizes 0-6 have male point in addition to length shown in the general dimensions on page 162
Thread Plug Gages - Taperlock Features/Benefits: manufactured from select steel ground, accurately lapped, and meticulously inspected in every thread element standard in X tolerance optional color gage
2017 NORTH AMERICA TAPS EDITION
2017 NORTH AMERICA TAPS EDITION PRIMED FOR PRODUCTIVITY THE MOST POWERFUL TAPS IN THE BUSINESS PROUDLY BEAR OUR NAME. WIDIA-GTD delivers a complete range of solid carbide, high performance, multipurpose,
Taps, Dies & Threading
Hand s Premium er, Plug & Bottoming Style s s, s & ing Inch s er Style Plug Style Bottoming Style 6 32 2 3 0.688 GH3 915600 915628 915656 8 32 2-1/8 4 0.750 GH3 915601 915629 915657 10 24 2-3/8 4 0.875
TPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM
Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer)
SPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
List No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
New Tool Ref Length (mm) Body Length (mm)
4 Series T-A olders Thread to BSPT & ISO 7-1 G L5 L4 L2 D1 D L1 Flanged Straight Shank elical Fluted Design L3 Available Ex-Stock GEN3SYS older Reference Number older Flute D L1 L2 L3 L4 L5 D1 G * Drill
Body Length (mm) New Tool Ref Length (mm)
3 Series olders Thread to BSPT & ISO 7-1 G L5 L4 L2 & GEN2 D1 D Flanged Straight Shank older Reference Number older Type Flute Type elical Fluted Design L3 L1 Available Ex-Stock D L1 L2 L3 L4 L5 D1 G *
8 to 10 threads chamfered for easy thread starting in tough material.
TAPER 8 to 10 threads chamfered for easy thread starting in tough material. NC = National Course NF = National Fine PLUG BOTTOM 3 to 5 threads chamfered for general use when tapping to bottom of hole is
YE-PT19 EUROPE. HSS-PM (Powder Metallurgy) TAPS Excellent Performance on Various Work Materials HEAD OFFICE
YE-T19 EUROE (owder Metallurgy) TAS Excellent erformance on Various Work Materials HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South orea hone: +82-32-526-0909 Http://www.yg1.kr E-mail: yg1@yg1.kr
5/6 and 7/8 Series T-A Holders
5/6 and 7/8 Series T-A Holders L4 Thread to BSPT & ISO 7-1 G D1 L5 L2 L1 D Helical d Design L3 5/6 Series Flanged Straight Shank Available Ex-Stock Holder Reference Number Holder Morse Taper Per ISO 296
Expansion. Achieves high-efficiency milling with V f of over 20,000mm/min thanks to more teeth (3 edges per inch).
igh Efficiency for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes and BBT30
End Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
INDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits
INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...
Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
P&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
Coatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
ER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,
Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks
HIGH SPEED ALUMINIUM MACHINING WITH ULTRA HIGH METAL REMOVAL & EXCELLENT SURFACE FINISH
IG EED ALUIIU ACIIG WIT ULTRA IG ETAL REOVAL & EXCELLET URFACE FII teel ardened teel tainless teel RA s Cast Iron on Ferrous TE O. 1 ILLIG YTE FOR ALUIIU, COER, LATIC & BRA, OFFERIG IRROR FII ULTRA IG
Solid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
PRECISION THREADING TECHNOLOGY
PRECISION THREADING TECHNOLOGY TAPS DIES THREADING KITS CUSTOM-MADE PRODUCTS 2016 Precision and Quality Good quality is the best marketing, because satisfi ed customers underline our success. Our most
SIZE BRIGHT TiN COAT FRAC- WIRE DEC. FLUTE EDP EDP TIONAL GAGE EQUIV. LENGTH OAL NO. NO.
Drills Screw Machine Length Drills High Speed Steel 118 Point General Purpose Bright Finish or TiN Coated Developed primarily for use in screw machines, these short length drills provide maximum rigidity
KED Drill. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
EPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
AccuPort 432 CONTENTS. AccuPort 432 Range Page 166. AccuPort 432 & AccuThread 856 Kits Page 173
T- & GEN2 T- Durable and precise, holders provide a strong and rigid platform for the drilling of hydraulic ports. The holders precision ground insert location surfaces ensure total repeatability and simple,
Chipbreaker Geometry Negative...F2 F3. Chipbreaker Geometry Positive...F3. Grades and Grade Descriptions...F4. Speed and Feed Chart...
WIDIA Value Chipbreaker Geometry egative....................................................................f2 F3 Chipbreaker Geometry ositive.......................................................................f3
Hydraulic Equipment. Check our website for the latest technical information.
Hydraulic Equipment www.anchorlamina.com Check our website for the latest technical information. Portable Hydraulic Die Setter & Drilling & Tapping Equipment Lamina Hydraulics has moved into the new millenium
ALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
Pipe Size Pipe OD TwinSeal Hinged Design for IPS PVC Pipe MODEL 3402 BRONZE SADDLE FOR COPPER TUBING
MULTIPLIER SERVICE SADDLES MODEL 3401 BRONZE SADDLE FOR IPS PVC BODY CASTINGS: Waterworks Bronze (85-5-5-5) per ASTM B584 and AWWA C800. FASTENERS: Silicon Bronze per ASTM B98. GASKET: Patented SBR TwinSeal
Drilling Solutions. Solid Carbide Tools. New Expanded Offering VALUE AT THE SPINDLE. High Performance
Solid Carbide Tools Drilling Solutions High Performance VALUE AT THE SPINDLE ISO 9001 Certified Company New Expanded Offering A B1 B2 E D C A HIGH PERFORMANCE FLUTE DESIGN efficiently transports chips
Quick-change adapters, positive drive inch sizes
P Quick-change aapters, positive rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable
insert height A.250 B.337 chipbreaker corner radius Inch Metric.008 0, , , ,8 w Description EDP Code Inch Metric R L H A
Deep Grooving Insert Nomenclature hart VDG 125 008 vee-bottom deep grooving insert height.250.337 chipbreaker GOOVING groove idth Inch Metric.125 3,18.156 3,96.188 4,78.218 5,54.250 6,35.312 7,92.375 9,53
Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
No. of Holes. Drill Dia. (in.)
UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast
COMPLETE SYSTEMS ARTICULATING ARMS TAPPERS & MORE!
COMPLETE SYSTEMS ARTICULATING ARMS TAPPERS & MORE! TAP-RITE TAPPING SYSTEMS The Most Convenient & Efficient Option For Tapping! Our Complete Tapping System Includes Everything You See Here! Tapping Motor
CTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
Concentric butterfly valves
Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16
Connecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
Reamers. - Hand - Machine (Morse Taper & Chucking) - Bridge - Taper Pin - Morse Taper Socket - Taper Pipe - Adjustable
REAER Reamers - and - achine (orse Taper & Chucking) - Bridge - Taper in - orse Taper ocket - Taper ipe - Adjustable AVAILABLE I ULTILE LAGUAGE L00 VE L00 VL L00 VFR L00 VDE L00 VIT L00 VE L00 VE Engineers
Carbide Burrs 1/4 Shank. Burrs & Routers. morsecuttingtools.com. List No Single Cut. List No Double Cut. Cylinder Shape Radius End
Carbide Burrs 1/4 Shank General Purpose Recommended for steel, cast iron, ferrous materials. Offers good stock removal and smooth workpiece finish. For rapid stock removal in tough applications. Design
GEN2 T-A Drill Inserts
RILLING T- Replaceable Insert rilling System GN2 T- rill Inserts Series iameter Range: 12.98mm - 17.65mm (.511 -.695 ) RILLING T1 1 132 HSS Inserts - Super obalt arbide Inserts - K2 (2) K35 (1) Insert
1/2 Air Impact Wrench P/N IR 2235TiMAX-2 With 2 Anvil, Weighs Only 4.9 lbs ft.-lbs. torque. 3/4 Super Duty P/N IR 261
37 Order NLINE www.midwestwheel.com CATALOG NUMBER Ingersoll Rand Air Tools & Accessories 3/8 Air Impactool IR 2115TiMAX The best power-to-weight ratio in its class 300 ft.-lbs. torque Enhanced power settings
AMERICAN FLOW CONTROL 4"-48" SERIES 2500 TAPPING VALVES
AMERICAN FLOW CONTROL 4"-48" SERIES 2500 TAPPING VALVES FEATURES/SPECIFICATIONS/MAINTENANCE FEATURES AMERICAN provides tapping valves for sizes 4 in. 48 in. rated at 250 psig pressure. Tapping valves 4
2012 CATALOG BEST VALUE IN THE WORLD OF CUTTING TOOLS FEATURING NEW PRODUCTS AND ADDITIONAL SIZES!
2012 CATALOG FEATURING NEW PRUCTS AND ADDITIONAL SIZES! BEST VALUE IN THE WORLD OF CUTTING TOOLS YG-1 CO., LTD. FOR INFORMATION TOLL FREE : 1-800-765-8665 1 CONTENTS INSERTED DRILLS 3 9 i - DREAM DRILLS
MFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
Endmills. Drills. Reamers. Where high performance is the standard. Countersinks Edgehog. Burrs. Performance, Precision, Economy
Edgehog Where high performance is the standard Performance, Precision, Economy For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable
AUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY
AUTOMOTIVE AEROSPACE DIE AND MOLD MEDICAL MACHINE TOOL INDUSTRY BURS Table of contents Burs Series Number Page Number Cylindrical with no end cut... SA... 05 Cylindrical with end cut... SB... 05 Cylindrical
Multimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
Industrial Tooling Corporation Ltd. Product Catalogue Issue 10
Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Company Profile Company Profile ITC is a round tool specialist. Our objective is simply to provide you, our customer, with the correct cutting
Shark Line Material specific application taps
Shark Line Material specific application taps 2018 SHARK LINE SHARK MATERIAL SPECIFIC APPLICATION TAPS INTRODUCTION Our material specific application-based range of DIN Shark Taps offer high performance
POWER PRICE UNI. powerful UNF METAL. UNCPower. power ful GOLD FOR. powerful TOP GEOMETRIES UNF PERFECT CHOICE VER. perfect thread form.
MADE BY UNIVERSALtaps TOP GEOMETRIES FORM EUNIVERSAL UNIVERSAL TAPS powerful perfect UNF longideal flutes choice tool life PROCESS RELIABLE PERFECT universal power ful UNC-THREAD ISO-METRIC THREADS GUHRING
TWIST DRILLS AND COUNTERBORES
TWIST DRILLS 827 TWIST DRILLS AND COUNTERBORES Twist drills are rotary end-cutting tools having one or more cutting lips and one or more straight or helical flutes for the passage of chips and cutting
WFXC Type. Expansion H62. General Features. Characteristics. Series. Milling. Cutters. SEC-Wave Mill
EC-Wave ill WFX Type Expansion General Features EC-Waveill WFX type for shoulder milling, is a screw-on type cutter that uses 4-cornered inserts. Ideal cutting edge design delivers good squareness. eries
CUTTING TOOLS 5/64 27/64 3/32 7/16 7/64 29/64 1/8 15/32 9/64 31/64 5/32 1/2 11/64 3/16 3/16 13/64 13/64 7/32 7/32 15/64 15/64 1/4 1/4 17/64 17/64 9/32
JOBBER LENGTH NITRO DRILL BITS 135 SPLIT POINT MADE IN USA 10601 1/16 10623 13/32 10602 5/64 10624 27/64 10603 3/32 10625 10604 7/64 10626 29/64 10605 1/8 10627 15/32 10606 9/64 10628 31/64 10607 5/32
SMD FEATURES & BENEFITS. 1.5X Diameter. 3X Diameter. 5X Diameter. 8X Diameter. 12X Diameter. Features & Benefits. Easy Assembly
FEATURES & BENEFITS Features & Benefits Features & Benefits Available in metric and inch diameters ranging from 0.4688-1.6535 (42.0mm) Available in 3X, 5X, 8X & now 1.5X & 12X diameter hardened steel bodies
BELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
2011 Cat Hand Tools and Shop Supplies
2011 Cat Hand Tools and Introduction................................................................................................................................ 1-1 Hand Tools Section Index...................................................................................................
Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
DRILL INSERTS & HOLDERS
DRILL INSERTS & HOLDERS THROW-AWAY DRILL INSERTS DRILL INSERT HOLDERS HOLDER ACCE SSORIES General Introduction Throw-Away Drill Inserts and Holders The Throw-Away Inserts YG-1's throw-away drill inserts
CONTENTS Bushings and Hubs
CONTENTS s and Hubs TPER-LOCK s Features/Benefits............................................................. PT6-2 Nomenclature................................................................. PT6-2
REPLACEABLE TIP DRILLS
REPLACEABLE TIP DRILLS Pages 463-470 Pages Features & Benefits...464 T-Drill Tips... 467-468 H 3XD Bodies...465 H 5XD Bodies...465 H 8XD Bodies...466 H 12XD Bodies....466 H 1.5XD Bodies & Tips.... 467
Quick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
KED DRILL. Economical and High Efficiency Indexable Drill. KORLOY Indexable New Generation Economical Drill. For Small Diameter Drilling
KORLOY Indexable New Generation Economical Drill Economical and High Efficiency Indexable Drill For Small Diameter Drilling Excellent chip control for small diameters (Ø13~Ø23.5) due to optimized chip
High Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
Lubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
CASH VALVE B SERIES PRESSURE REGULATORS
Single seated, spring loaded, direct acting diaphragm-type pressure reducing and regulating valves for a broad range of services FEATURES Reduce high inlet pressures to lower outlet pressures within close
P: F:
TLOG GUIDE rand new product offerings. Visit our website at www.coolantfedtooling.com for technical information and our latest product offerings. Expanded offering of an existing product line in either
台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY
C1 C2 C3 Dial Gages (Small Bezel Dia) DG-9003S DG-9004S DG-9005S DG-9003S DG-9004S 0-3mm 0-4mm ψ40mm Aluminum Body ψ36mm Aluminum Body DG-9005S 0-5mm ψ40mm Aluminum Body Dial Gages (Normal) DG-9010A DG-9010R
Section 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ
GU 500 DZ PREMIUM COBALT DRILLS GU 500 DZ GU 500 DZ Premium Cobalt Drills The GU 500 DZ drill series from Guhring is designed for the machinist who doesn t want to settle for average results. When carbide
About Grind-All Supply Ltd.
About Grind-All Supply Ltd. Grind-All Supply Ltd. - Supplying you with top quality carbide burs, diamond-coated burs, air tools, parts, and accessories. Grind-All Supply Ltd. has been providing quality
SEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance
Product News No.492 Grooving / Cut-off Tools EC-Grooving Tool s 12-017 (GND型) -7$ (&2 352'8&7 ష෭ Ӥ أܞ ܞ Ӕ -7$ գ ଳཋ ട (GNDI型) table Machining through Outstanding Chip Control and Chattering Resistance Performance
SC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
FLEXIBLE. EASY-TO-USE. DURABLE. BI-METAL HOLE SAWS
FLEXIBLE. EASY-TO-USE. DURABLE. BI-METAL HOLE SAWS DESIGNED WITH TIME SAVINGS AND LONGEVITY IN MIND. THE UNIVERSAL PRODUCT FOR CUTTING HOLES IN WOOD AND METAL. BI-METAL HOLE SAWS When it comes to purchasing
Solid Carbide Tools. Drilling Solutions. New Expanded Offering. ISO 9001 Certified
Solid Carbide Tools Drilling Solutions New Expanded Offering ISO 9001 Certified A B1 B2 E C D SERIES 135 A HIGH PERFORMANCE FLUTE DESIGN efficiently transpts chips increases strength f aggressive drilling
Standard programme. Multi-bladed reamers and counterboring tools. The tool specialists for the trade.
Standard programme Multi-bladed reamers and counterboring tools The tool specialists for the trade. 2 STANDARD PROGRAMME Introduction Welcome to the world of precision! Founded in 1906 by August Beck as
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
TAPER AND DEBURRING COUNTERSINKERS
TAPER AND DEBURRING OUNTERSINKERS Taper and deburring countersinkers The flutes of the new RUKO highperformance taper and deburring countersinkers are BN ground from the fully hardened material. Because
HI-FLOW FUEL RAIL. Installation Instructions for: Part Numbers , ,
HI-FLOW FUEL RAIL Installation Instructions for: Part Numbers 25-100, 25-103, 25-112 ADVANCED ENGINE MANAGEMENT INC. 2205 126 TH Street, Unit A Hawthorne, CA. 90250 Phone: (310) 484-2322 Fax: (310) 484-0152
Newest Addition. Micro -Tuff. Micro Drill. The Tuffness Of The 205. Series Hi-Tuff Drill On A Micro Drill Platform!
Newest Addition The Tuffness Of The 205 Series Hi-Tuff Drill On A Micro Drill Platform! Micro -Tuff Micro Drill Micro Drills NEW Addition Micro -Tuff 305 Series Micro Drill Web-Thinned Point 4-Facet Point
Engineer The Lift!! HOIST RINGS. Applied Load Changes With Sling Angle. Sample Calculation: DO S DON TS
H&O DIE SUPPLY, INC. 1-800-222-5441 sales@hodie.com HOIST RINGS 10 Adjustable Alloy Chain Sling... 10.16 Center Pull Style... 10.4-10.5 Envirolox Protective Finish... 10.11 Eye Bolts... 10.15 Eye Nuts...
390 Series Multi-Stage Vertical In-Line Centrifugal Pumps
Bulletin 390 /Rev. B 390 Series Multi-Stage Vertical In-Line Centrifugal Pumps Capacities to 400 G.P.M. (91 M 3 /HR) Heads to 800 Feet (243 Meters) Temperatures to 250 F (120 C) motralec 4 rue Lavoisier.
Product Tips and Features
6.00.01 anifolds & Valve Packs Product Tips and Features Cover Plates Cover Plates are used in place of directional valves to either completely block off a bar manifold station, or to provide a means of
Threading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
Mill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
SERVICES. Plasma Burning Shearing Sawing To Length Pipe and Tube Cutting Bundle Sawing Galvanizing Custom Processing
PRODUCTS Beam Channel Rail Angle Flat Bar Plate Floor Plate Abrasion Resistant / Wear Plate Sheet Galvanized Sheet Round Bar Square Bar Rectangle / Square / Round Tubing Pipe Cold Roll Expanded Metal /
Ford Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
S-TAW. Changeable Carbide Insert Type Drill
News 2012.02 - Drilling Tools Changeable Carbide Insert Type Drill Innovative insert clamping offers stability and reliability when drilling small holes. Diameter range ø10.0- ø18.4, L/D 1.5, 3, 5, 8 54
9 Drawer Top Chest - PRO+ Series 42 x 19 x 23¹ ₂ Capacity: 10,841 cu. in. List $1, $866 95
93119 9 Drawer Top Chest - PRO+ Series 42 x 19 x 23¹ ₂ Capacity: 10,841 cu. in. List $1,300.79 $866 95 93109 9 Drawer Top Chest - PRO+ Series 26 x 19 x 21 Capacity: 7,130 cu. in. List $745.25 $496 95 93211
Expansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch).
igh Efficiency Cutter for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes
AQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,