Quick-change adapters, positive drive inch sizes
|
|
- Martha Millicent Casey
- 5 years ago
- Views:
Transcription
1 P Quick-change aapters, positive rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable for right an left han tapping P P P P P Prouct range Aapters Shank inch Square inch P0 P1 P2 P3 P4 #0 - # # # # /4" /16" /8" /16" /2" /16" /8" Pipe /8" Pipe /8" /16" /4" /16" /8" /4" Pipe /8" Pipe /2" Pipe /16" " /8" /4" /8" /4" Pipe " Pipe /2" /8" /4" /8" /4" Pipe /2" Pipe "
2 P Quick-change aapters, positive rive metric sizes For quick change tap chucks TA, T, NC an SP QC with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable for right an left han tapping P P P P P Quick change aapters, positive rive metric sizes Shank Square P0 P1 P2 P3 P4 M2, M2.5, M P M3, M P P M P P M P P M4, M P P M4.5, M5, M6, M P P P M P * P P M7, M9, M P * P P M P P M P P M P P P M P P M P P M P P M22, M24, M25, M P P P M27, M P P M30, M P P M P P M34, M35, M36, M P P M39, M40, M P M45, M48, M P Note: Version with (*) only suitable for light processing Note: other sizes available on request. 41
3 TC Quick-change aapters, with pre-selective torque rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. A pre-selective torque rive protects the tap from breakage. Features an Avantages n with pre-selective torque rive n suitable for right an left han tapping TC TC TC TC TC Prouct range Aapters with torque control Shank Square inch inch TC0 TC1 #0 - # # # # TC2 1/4" /16" /8" /16" /2" /16" /8" Pipe /8" Pipe /8" /16" /4" /16" /8" /4" Pipe /8" Pipe TC3 1/2" Pipe /16" TC 4 1" /8" /4" /8" /4" Pipe " Pipe /2" /8" /4" /8" /4" Pipe /2" Pipe
4 TC Quick-change aapters, with pre-selective torque rive metric sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. A pre-selective torque rive protects the tap from breakage. Features an Avantages n with pre-selective torque rive n suitable for right an left han tapping TC TC TC TC TC Prouct range Aapters with torque control Shank Square TC0 M2, M2.5, M TC TC1 M3, M TC TC M TC TC M TC TC M4, M TC TC TC2 M4.5, M5, M6, M TC TC TC M TC * TC TC M7, M9, M TC * TC TC M TC TC M TC TC TC3 M TC TC TC M TC TC M TC TC M TC TC TC4 M22, M24, M25, M TC TC TC M27, M TC TC M30, M TC TC M TC TC M34, M35, M36, M TC TC M39, M40, M TC M45, M48, M TC Note: Version with (*) only suitable for light processing 43
5 TF Quick-change collet chuck aapters for rubber flex collets (RF) holers with various or ajustable back jaws for quick change tap chucks TA an NC. Only 2 multi-range collets (RF) per type necessary to cover capacity. elivery inclue wrench an necessary square rives for the specifie capacity. Please note that rubber flex collets are also inclue Moel size Collets Rubber Flex Inclue TF M1.4 M TF M3 M TF M5 M TF M10 M imensions A B C All imensions are shown in = 1" Rubber Flex multi-range collets Rubber Flex collets for TAPMAT tapping attachments an chucks. Moel capacity M1.4 - M7 #0-1/4" M3 - M12 #6-1/2" Capacity Type Extra Stanar Stanar Extra Stanar Stanar Extra Moel capacity M5 - M18 #10-3/4" M10 - M30 1/2" - 1 1/8" Capacity Type Extra Stanar Extra Stanar Stanar Stanar XB collets For TAPMAT miniature tapping attachment moel 100XB. Moel Capacity Type Moel Capacity Type 117XB IN XB IN XB ISO 117XB IN XB XB ISO 117XB XB
Tension / Compression tap chucks for tapping cycles that are not synchronized
Tension / Compression tap chucks for tapping cycles that are not synchronize For tapping applications on CNC machines where the revolutions per minute an fee rate are not synchronize to the tap pitch,
More informationManual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationTapping attachments Tap chucks Cutting fluids
Tapping attachments Tap chucks Cutting fluis Quality, reliability an goo service are what TAPMATIC stans for Since its establishment in 1952, Tapmatic has manufacture tapping attachments of the highest
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More informationFloating Holder. Radial float and angular float mechanisms compensate for misalignment between reamer and pre-drilled hole.
Specialize Applications ing Holer Specialize Relate Stub Holer Tapping Chuck Tap Aapter Aapter Enmill Chuck Straight Chuck ing Holer High precision reaming with special purpose machines an transfer lines.
More informationQuickFlex. Designed for. The new quick change system for high performance and precision. Minimal investment, maximal expandability.
The new quick change system for high performance an precision. Minimal investment, maximal expanability. for MAZAK Quick Turn Smart 200M/300M/350M Designe for 1 The perfect combination: ER collet chuck
More informationProduct Range. Butterfly Valve Type 567
Prouct Range Butterfly Valve Type 567 Butterfly valves SYGEF SYGEF stanar Butterfly valve type 567 PVF Bare shaft Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length
More informationFMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
More informationShrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
More informationE3000 Series. Electric System. ø1.18", ø0.98", ø0.79" ø1.18", ø1.0", ø0.98", ø0.897" ø1.97", ø1.18" 7 TECHNICAL DATA 8 APPLICATION EXAMPLES
NC / CNC LATHE & AUTOTION SOLUTIONS Series Electric System,~, min - (rpm) One Piece Type Outsie Diameter Moular Type Outsie Diameter,, ø.9" (ø,, mm),,, (ø,.,,. mm) ispee / / -,rpm E ø." ø.9" ø." ø.9",~,
More informationPinzBOHR High Precision Boring Tools
PinzBOHR High Precision Boring Tools What to expect from our boring tools. Our European mae boring tools have been proven worl wie to be among the best you can buy. Machinists love our boring tools because
More informationProduct Range. Butterfly Valve Type
Prouct Range Butterfly Valve Type 567 ist of Abbreviations ANSI American National Stanar Institute ASTM American Society for Testing an Materials BS British Stanar IN eutsche Inustrie-Normen ISO International
More informationBuilt for Speed. Pinzbohr High Precision Boring Tools. Pinzbohr Modular Boring System. BohrSTAR Boring Kits. Rough and Finish Boring Heads
Pinzbohr High Precision Boring Tools BohrSTAR Boring Kits Rough an Finish Boring Heas Boring Hea Toolholers Carbie an HSS Boring Bars Built for Spee. BohrSTAR High Precision Kits Range 0.314" up to 8.27"(8mm
More informationTAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
More informationAdjustable IPX3 / IPX4 Test Systems Built in accordance with IEC 60529, and meeting EN 60539, IEC 60335, IEC 60950, EN 60335, and others
PROUCT SAFETY SOLUTIONS OSCILLATING SPRAY TEST SYSTEMS MOELS OTU-1000 and OTU-1600 Adjustable IPX3 / IPX4 Test Systems Built in accordance with IEC 60529, and meeting EN 60539, IEC 60335, IEC 60950, EN
More informationBLOCKS 1 SHEAVE DOUBLE HOOK DOUBLE HOOK WITH SHACKLE HOLE O QUAD HOOK SHACKLE STUD EYE FAX PHONE
1 SHEAVE DUE HK DUE HK WIH SHACKE HE QUAD HK SHACKE SUD EYE MDE N. W (US) FR WIRE DIMENSINS (INCH) Ø Ø Ø SR 225.xx.1.12.5.E 13.75 3/8-9/16 10.2 8.9 20.6 2.5 13.6 6.7 31.4 35.9 D D 165 SR 225.xx.1.16.E
More informationAKG 2009 (changes and errors expected) GLOBAL STANDARD COOLER
AKG 2009 (changes and errors expected) GLOBAL STANAR COOLER GLOBAL STANAR OIL-TO-AIR COOLING SYSTEMS WITH C-MOTOR PROUCT INFORMATION AKG CooL-Line is a standard line of products from the market leader
More informationCALL US WITH YOUR MACHINE MAKE & MODEL. WHETHER YOU NEED COOLANT THRU OR SOLID, WE WILL FIND THE RETENTION KNOB FOR YOU!
RETENTION KNOBS For CAT40, CAT50, BT0, BT40 & BT50 CAT40 Retention Knobs 5/8 Description DWG. T A L HOLE? Socket X70A 40EA / A45.440(C.8) A A.65 45.5 Y RKW40 X70A 40EA / A45.440 A A.65 45.5 N RKW40 X704A
More informationWES B WEN WESN B WE S. Specialized Machine QUICK CHANGE TAP ADAPTER. Basic 4 Models. Quick Change. Quick Change. Safety Torque.
Basic 4 Models QUICK CHANGE TAP ADAPTER Quick Change S B N SN B S N Quick Change Safety Torque Quick Change Length Adjustment Quick Change S Safety Torque N Length Adjustment In addition to the basic 4
More informationTriple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
More informationFOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
More informationSTRAIGHT SHANK TOOL HOLDER CATEGORY
STRAIGHT SHANK TOOL HOLDER CATEGORY NC / ER COLLET CHUCK T-2 COLLET CHUCK [AND EXTENSION TYPE] T-3~6 ER COLLET CHUCK SYSTEM [FOR AUTOMATIC LATHE] T-7~8 ER TAPPER [FOR CNC LATHE] T-9 SBL COLLET CHUCK T-10
More informationThe Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use
C-ROM Sizing Software ETP Keyless Shaft Mount Connections The Ieal ocking evices For Shaft-to-Hub Connections. ETP Connections are ieal for positioning an locking shaft components in a system. They are
More informationMicro-Grinder AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 250 WEST DUARTE ROAD, #E MONROVIA, CA USA
Micro-Griner Air Driven 0,000 min - (rpm) 0,000 min - (rpm) PRESTO 0,000 min - (rpm) MODULAR TYPE HIGH TORQUE AIR GRINDER High torque air motor assemble with special vane mechanism. Two types of air motors
More informationType2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
More informationBRUSHLESS MOTOR & SPINDLE E3000 SERIES Modular Type ø1.18"(ø30 mm)
BRUSHLESS MOTOR & SPINDLE SERIES Moular Type ø."(ø mm),~, min- (rpm) Maximum Output W Motor spee is isplaye accurately on the front panel. Auto or Manual Control Moes. Can be installe on Special-Purpose
More informationCAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationMetal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit
HSS-E IN 338 cobalt 72-75 HSS IN 338 groun 76-79 HSS IN 338 stanar 80-84 HSS IN 338 stanar, shank reuce 85 HSS IN 340 86 HSS IN 1869 87 HSS hollow section rill bit / facae rill bit 88 HSS IN 345 89-90
More informationØ range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max
Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range
More informationDIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...
IN 69871 SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER........ 47 SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50
More informationOmslag. Main Catalogue EN
Omslag Main Catalogue EN We reserve the right to moify any specification an/or item shown in the present catalogue without notice. Information, photos, rawings an technical ata specifie in the publication
More informationyour reliable partner EAS -Compact K.490.V16.EN
ES -Compact K.490.V16.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one of the most traitional an yet most innovative
More informationFP-4000 Series FLOAT LEVEL SWITCH OUTLINE MAIN APPLICATIONS STANDARD SPECIFICATION
FOR MULTIPOINT LEVEL ALARM ETECTION BY ONE UNIT FP- Series FLOAT LEVEL SWITC OUTLINE The FP- series is a float level switch, which is installe through the tank nozzle on tanks an/or pits. Level alarm etection
More informationInventory Article No. Precision mm 0.01mm 35um 386g. Precision A
DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS
More informationBimetal thermometers Index
Inex eneral information Prouct information With brass pocket page Inex 685 Brass pocket; Aluminium case 686 Brass pocket; 687 With brass probe page Brass probe; Aluminium case; Air uct thermometer 688
More informationMETAL DRILL BITS STRONGER THAN STEEL HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
STRONGER THAN STEEL RILL 307 HSS-E IN 338 cobalt 76 79 311 HSS TIN IN 338 steel rill bit 80 81 302 HSS IN 338, groun, split point 82 85 300 HSS IN 338, stanar 86 90 300 HSS IN 338, stanar, shank reuce
More informationSCREWS, CHUCKS, RIVETS & DRILL BITS
SCREWS, CHUCKS, RIVETS & RILL BITS PROUCT CATALOG & SUBMITTALS SUPER SABER SELF SCREWS FOR LIGHT TO MEIUM GAUGE esigne for light-to meium-gauge materials, the Super Saber Point offers one-step fastening.
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationTechleader Clearance Items Qty. Order No. Description Price
Techleader Clearance Items Qty. Order No. Description Price Collets 16C 4 160-056-SE 16C 7/8" Round Serrated Collet $40.95ea 2 160-004 16C 1/16" Round Smooth Collet $34.50ea KATO TC TAP COLLETS 1 810-101
More informationMODEL DH 50MB POWER TOOLS TECHNICAL DATA AND SERVICE MANUAL HAMMER DRILL DH 50MB SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT
MOEL H 50M POWER TOOLS HAMMER RILL H 50M TECHNICAL ATA AN SERVICE MANUAL LIST No. E455 Feb. 2000 SPECIFICATIONS AN PARTS ARE SUJECT TO CHANGE FOR IMPROVEMENT Notice for use Specifications and parts are
More informationPINZBOHR BORING SYSTEM. Index
Index - Rough heads - Finish heads - Micro boring heads & boring bars - A4016 micro heads & 16mmØ shank boring bars - Key to select arbors - Arbors programme - Extensions & reducers - Large diameter boring
More informationROTACTION Sockets and bits for Industrial power tools
ROACION s an bits for Inustrial power tools ROACION the professional Atlas Copco solution for safer tihten Atlas Copco offers a new eneration of covere sockets: ROACION. he trensett, avance ROACION concept
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationRexnord Tollok Locking Assemblies
Tollok Catalog ownloa the most up-to-ate version at www.rexnor.com/ocumentation Rexnor Tollok Locking Assemblies Why Choose Rexnor Tollok Locking Assemblies? Why Choose Rexnor? When it comes to proviing
More informationMicro-Grinder AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 250 WEST DUARTE ROAD, #E MONROVIA, CA USA
Micro-Griner Air Driven 0,000 min - (rpm) 0,000 min - (rpm) PRESTO 0,000 min - (rpm) MODULAR TYPE HIGH TORQUE AIR GRINDER High torque air motor assemble with special vane mechanism. Two types of air motors
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
More informationHSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...
(IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE
More informationOther Toolholders. (SwissQuick Reductions) (Morse Tapers) (Automotive Shank)
Other Toolholders (SwissQuick Reductions) (Morse Tapers) (Automotive Shank).01 Features and Benefits ERM/ERM and ER/ERM.02 ERM/ERM and ER/ERM SwissQuick Collet Reductions.03 Features and Benefits ISO 20/ER.04
More informationSuper. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
More informationANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationTaper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
More informationAir Turbine ABT TECHNICAL DATA 8 APPLICATION EXAMPLES. Features. AIR BEARING SPINDLE ABT Series. 100,000 min -1 (rpm) Output : 88W.
AIR BEARING SPINDLE Series Turbine -000 00,000 min - (rpm) Output : W Outsie Diameter ø."(ø0 mm) Features Principle of Bearing Nozzle ispee - Moular - 0,000rpm ø0." Xpee Series Connection
More informationUSE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More information* Please mention "Code Number" upon your order.
BRUSHLESS MOTOR & SPINDLE FOR Series Please mention " Number" upon your orer. '...A PRK25E Ver. E25 SERIES Ultra Precision Excellent urability an high rigiity are obtaine using a highspee brushless motor.
More information0200/11.02 AMTEC. Precision thread inserts for plastic parts and equipment for installation
0200/11.02 AMTEC Precision threa inserts for plastic parts an equipment for installation AMTEC threa inserts Contents Page AMTEC highly wear-resistant threa inserts for plastic parts 3 The avantages an
More informationAir Champ. Product Function & Selection Chart...54 Section Index...55
GENERAL INFORMATION Product escription Index...1 PROUCT NUMBER INEX Product Numbers Index...2-3 FAMILY OF PROUCTS Air Champ Features & Benefits...4 Air Champ Family of Products...5-9 CLUTCHES Product Function
More informationCCW. φ90. 6,000min -1. φ119 ー M 4 M 4 21 ー M 5 M 5 ー M 6 M 6 ー M 8 M 8 TA 6 ー M 3 M HFT 6 ー M 4 M 4 22 HUT 6 ー M 5 M 5 HFT12
AF 90 rill ndmill Fig. 1 F7 ( ) F7 φ=1 7 68 60 ( 55 ) 42 ( 46 ) φ72 Fig. 2 4,000min Fig. 4 Fig. 6 4,000min F12 FA20 FT6 78 59 59 62 4,000 min 5,000min 4,000min 29 29 φ=2.5 13 φ=5.8 20 φ=3 12 58 Fig. 3
More informationULTRA-PRECISION BRUSHLESS MICRO-GRINDER ESPERT 500
ULTRA-PRECISION BRUSHLESS MICRO-GRINDER 00 Evolutionary New Design High-Performance Brushless Micro Griner. Ultra-Precision Micro-Griner The Espert 00 brushless motor takes motor technology to an even
More informationTF2 Series Miniature Snap-acting Switches
Miniature Snapacting Switches Features/Benefits Broad range of operating forces Ratings up to 10 AMPS Wide variety of actuator styles Quick connect terminations Typical Applications Motor controls Thermostatics
More informationThat s E[M]CONOMY: NEW. Not just training: Real action! CONCEPT TURN 260. CNC training with industrial performance
[ That s ] E[M]CONOMY: NEW Not just training: Real action! CONCEPT TURN 260 CNC training with industrial performance Concept TURN 260 As a systematic advancement of the CT250, the CT260 convinces by its
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationProduct Range Export April PVC-U piping systems for industrial application. Pipe, Fittings, Valves and Accessories
Prouct Range Export April 2006 PVC-U piping systems for inustrial application Pipe, Fittings, Valves an Accessories 40 Years of Application Know ow Approvals PVC-U ebensmittelzulassung lebensmittelecht
More informationMiniCut PCD Tipped Boring Bars
MiniCut PCD Tippe Boring Bars BECKER has evelope the MiniCut Tool System especially for boring from a iameter of.157" to.984" in PCD, CBN an optimizing the avantages of each material type. All boring bars
More informationE3000 / E3200 Series. Electric System. ø1.18"(ø30 mm) ø0.897"(ø22.8 mm) ø1.0", ø0.98"(ø25.4, ø25 mm) ø1.18", ø1.97"(ø30, ø50 mm)
NC / CNC LATHE & AUTOTION SOLUTIONS / E Series Electric System AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - Outsie Diameter,~, min - (rpm) Output W One Piece Type Outsie Diameter,~, min - (rpm) Output
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationQUALITY AND SERVICE DELIVERED WORLDWIDE
Prouct Catalogue QUALITY AD ERVICE DELIVERED WORLDWIDE [ TECOTIO ] Tecnotion is the global authority on linear motor technology. We are the worl s only unbunle manufacturer of linear motors. A former part
More informationCoroDrill Delta-C. Solid carbide drills DRILLING. Drill diameter from 0.3 mm. For highly productive hole making. Coolant
Cororill elta-c Solid carbide drills BIntroduction Solid carbide drills for small part machining designed for precision holes, IT8-10. Made with a tough fine-grained substrate with a wear resistant PV
More informationBNA42MSY Fixed Headstock Type CNC Automatic Lathe
BNA42MSY Fixed Headstock Type CNC Automatic Lathe 2 BNA-42MSY Citizen MSY With two spindles, the subspindle having an additional X axis, a Y axis turret and the latest Mitsubishi control, the BNA-42MSY
More informationCONTROL HANDWHEELS CONTROL HANDWHEELS
CONTROL HANWHEELS 2 ART. 205 TWO SPOKE CONTROL HANWHEEL Reinforce an stabilise polyamie. Oils an greases resistant. HANWHEEL COLOUR: CENTRAL CAP: Grey polyamie (RAL 7035 coe 13). ALTERNATIVE CAP COLOUR:
More informationISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
More informationBT Shank Tools BT30...E2 E18 BT40...E20 E60 BT50...E62 E95.
BT Shank Tools BT30.................................................................................E2 E18 BT40................................................................................E20 E60 BT50................................................................................E62
More informationTake O ff Dimensions. Profipress with SC- Contur. Pipe line systems / Pipe connection technology 12.8 /
A Take O ff Dimensions Pipe line systems / Pipe connection technology Profipress with SC- Contur 2.8 / 202 86529 www.viega.com A Take Off Dimensions Pipe line systems / Pipe connection technology Profipress
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationDriven Toolholders for HAAS Machines
riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool
More informationOMG NorthAmerica. The synthesis...
Series VH Series MO Series BAH Series TA OMG NorthAmerica The synthesis... SERIES BAH Extensions and Angle Heads SERIES HT Revolving heads SERIES TA-TAV-TAF-TAO Angle heads SERIES MO High precision spindle
More informationStretching Tools: ITH-Stretch-Method
Stretching Tools: ITH-Stretch-Metho The ITH-Stretch-Metho is capable of highly accurate, repeatable results to a tight tolerance of ±2.5%. These results are possible because the ITH-Stretch-Metho is free
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationRETROFIT TERMINAL UNITS
GENERAL PROUCT OVERVIEW Retrofit Terminal s Convert Constant Air Volume Systems to Variable Air Volume. Convert Constant Volume ual uct Systems to Variable Air Volume. Convert Multizone Systems to Variable
More informationSplit pillow blocks
Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with
More informationTABLE OF CONTENT. Single Row Radial Ball Bearings. Female Rod Ends. Male Rod Ends. Spherical Plain Bearings with PTFE Liner. Solid Type Shaft Collar
Since 001, GR earings, a 100% Canaian family owne company, has been a successful bearing supplier to Distributors an OEMs across Canaa. Our bearings are mainly importe from carefully selecte manufacturers
More informationStub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
More informationD I S C C O U P L I N G S
DISC COUPINGS DISC COUPINGS MAIN FEATURES The isc coupling is of the continuous ring laminate metallic iaphragm type with blaes in stainless steel. The torque is transmitte in pure tension through alternate
More informationBMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
More informationFAX FAX
2 seals on eman HERCULES SEALS ON EMAN provies a wie selection of custom, cost effective sealing solutions using avance rapi-prototype technology. The programmable CNC prouction cell can manufacture both
More informationHand Taps For Through or Blind Holes in General Machining Applications
TECHICAL IFORATIO & IDEX GAGES AITEACE TOOLS RODUCTIO TAS THREAD ILLS HIGH-ERFORACE TAS or Blind Holes in General achining Applications, achine Screw and Fractional Sizes Taper Chamfer 7 to 10 itches Series
More informationStatic & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form
More informationBU10P with through coolant supply
GROOVING and BORING TOOLOLER BU with through coolant supply epth of groove up to Width of groove up to.354.118.118 Material of shank: Carbide - Giving a good vibration resistance for use with Insert Part
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
PARTS LIST FOR NO. SERIES AM ANGLE TOOLS Form ZA Date 0March/F Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM).
More informationK-Factor. Global Installation Fittings and K-Factors. Global
K-Factor Global Installation Fittings an K-Factors Global K-Factor CD Table of Contents 5 6 7 8 13 14 21 22 27 28 35 36 37 38 39 40 47 48 49 50 51 52 59 60 61 62 63 64 65 66 67 68 79 80 81 82 83 84 91
More informationVariable Area Flow Meters Type 335, Type 350 Short Version Special Version. Product Range
Prouct Range Variable Area Flow Meters Type 335, Type 350 Short Version Special Version icenta Controls Lt, Unit 3 The Woofor Centre, Lysaner Way, Ol Sarum Park, Salisbury, SP4 6BU, UK Tel: +44 (0)1722
More informationLive Centers. High Speed Steel Main Line
ive enters igh Spee Steel Main ine MIN-IN: Reliable top of the range live center for N an conventional lathes, an grining machines With over-pressure security through isc springs oy an spinle moels: SM
More informationHigh-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
More informationPARALLEL PNEUMATIC MINIATURE GRIPPER
PARALLEL PNEUMATI MINIATURE GRIPPER Major enefits High grip force to weight ratio ompact size Two body styles with a total of four sizes available in both imperial and metric versions Spring assist on
More informationE2EM-X4X1 2M * E2EM-X4X2 2M Shielded E2EM-X8X1 2M * E2EM-X8X2 2M. M30 15 mm E2EM-X15C1 2M E2EM-X15C2 2M. M18 16 mm E2EM-X16MX1 2M E2EM-X16MX2 2M
Long-istance Proximity Sensor EEM CSM_EEM_DS_E_6_ Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for
More informationWrenches. Slogging wrenches Open ended impact slogging wrenches. Double flex wrenches. Ring type impact slogging wrenches.
Slogging wrenches Open ended impact slogging wrenches. Stock Size Length Width Height Price No mm mm mm mm 902024 24 178 14.5 2.4 22.50 902027 27 180 15.5 25.2 22.50 90200 0 190 16.2 0.0 27.50 90202 2
More informationArbours for PSC Polygon Shank Tooling
Arbours for Polygon Tooling CAT V-FLANGE to Taper CV 40 Designation L L1 kg SPECIAL CV40ADB--1.57 1.57.827.95 CV40ADB-50-1.97 50 1.97 1.22 1.00-69871 -AD Taper to Designation L L1 kg SPECIAL 40 69871-A40-50-1.18
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More information