Tapping attachments Tap chucks Cutting fluids

Transcription

1 Tapping attachments Tap chucks Cutting fluis

2 Quality, reliability an goo service are what TAPMATIC stans for Since its establishment in 1952, Tapmatic has manufacture tapping attachments of the highest quality an efficiency. Our focus on tapping attachments an tap holers, an our commitment to research an evelopment, has le to the granting of more than 30 patents in countries all over the worl. This investment in innovation an quality has mae Tapmatic a worl leaing manufacturer of tap holing tools. After first establishing a European sales organization in 1962, our European prouction facility was foune in Kriessern, Switzerlan, in Tapmatic International Corporation (calle TIC) has the primary responsibility of supplying Tapmatic proucts an proviing technical support to the European market. Toay, Tapmatic proucts are represente through our agents in more than 40 countries an we have our own sales offices in some of the major markets. Our Tapping Attachments an Tap Holers are prouce using highly automate equipment. Both Tapmatic Corporation in the Unite States an Tapmatic International in Switzerlan are ISO 9001:2008 certifie companies. This guarantees you of our continue commitment to offering proucts of the highest quality. Quality an economic efficiency, innovation an reliability are what have mae Tapmatic one of the worl s most recognize names for Tapping. TAPMATIC Post Falls, USA TAPMATIC Kriessern, Switzerlan

3 Selector Chart Tapping Attachments Moel X TC/C RX RTIC RT RCT50 RCT150 SP CNC SP ASR/RSR Capacity in Steel M0.5M30 M1.4M18 M1.4M18 M2.5M25 M1M27 M4.5M12 M25M42 M2M12 M1.4M42 M2M16 max. RPM For use on Manual machines CNC machines CNC machining centers CNC lathes Features Automatic reverse High-spee return 1.75:1 Constant spee tapping Pre-selective torque rive Har start Length compensation (tension) Release to neutral Ajustable epth control For right an left han tapping < > < > < > < > Variable Stop Arm (offset) Internal coolant system (max. 50 bar) Extene length version Collets an aapters Multi-range collets RF Steel collets ER/ER-GB Quick change tap aapters: T positive rive TC ajustable torque control ie holers E/TF collet holers Attachment mounts Internal taper Internal threa Straight shank IN 1835B+E HSK shank CAT Steep taper IN 69871A Steep taper MAS-BT (JIS B6339) VI 3425 mount (IN 69880) < > Moification possible Mount integrate Miscellaneous shank versions (short taper mount) for straight shank IN 1835B+E on page 47

4 The avantages of TAPMATIC tapping heas TAPMATIC s self-reversing attachments keep a constant tapping spee for optimum tap life. This means: ieal chip flow = perfect threa surface constant high RPM up to 5000 shorter machining time, ue to saving two spinle reversals per tappe hole therefore reuce wear to expensive CNC machines in most cases a 50 % to 100 % increase tap life Technical Terms Self-fee Permits the tap to act as its own lea screw. The self-fee accommoates any ifferences between threa pitch an machine fee control. The tap is propelle by rotation only an cuts a threa without pressure; this guarantees a threa of high quality, which is as accurate as the tap itself. Patente ball rive TAPMATIC s spring biase rolling ball esign transmits rotational power to the tap. The ball isengages smoothly an silently after reaching the threa epth switching to the reverse moe. Collets TAPMATIC tapping attachments use multi-range Rubber-Flex collets or steel collet ER type, preferably ER-GB. Usually no more than two Rubber-Flex collets are require to cover a unit s capacity range. Moular systems The straight shank esign with Welon type flats to IN1835B+E permits easy aaption to stanar tool holers. Threa epth accuracy TAPMATIC tapping attachments isengage after reaching their pre-selecte threa epth, irrespective of any machine spinle lag. The epth is equal to the fee set on the machine plus the self-fee in the unit. Ajustable slipping clutch The manual type TAPMATIC heas are fitte with a safety clutch, which guars against tap breakage. This clutch esign is intene as a safety evice only an a machine stop shoul be set to allow the tap to release before bottoming whenever possible. Internal coolant system Some TAPMATIC tapping attachments are esigne with internal coolant systems capable of a supply up to 80 bar. Ieal lubrication is achieve by supplying coolant within or alongsie the tool shank, thereby threa quality is improve. Furthermore this can be cost-effective as tap life is increase by washing away swarf from the core hole. Har start Because of its unique esign, the har start guarantees the tap will cut at the same point each time without compression, even at high RPMs. Front release This protects the tap chuck, tap aapter, tap an work piece from amage.this can occur when the length compensation is exceee (tension) e.g. because the machine spinle lags in the change from forwar to reverse or a rapi spinle movement backwars before the tap is completely out of the component. In these situations the quick change tap aapter isengages from the tap holer automatically an avois expensive amage. Pre-selective Torque rive By turning the Clutch Ajustment Cap, the torque setting can be ajuste to the correct position for the torque neee to rive the tap in to the hole, but less than the torque require to break the tap. This helps protect the tap from breaking if it becomes ull or contacts the bottom of a blin hole. Automatic reversal TAPMATIC reversing tapping attachments change their rotation irection automatically when the machine retracts. This eliminates the nee to reverse the machine spinle, which not only saves time an energy, but also increases tap life. Backlash Is a reference to a small amount of play between the components of a machine that provie the rotational or translational movement. This play can have a negative effect on the synchronization of the machine s tapping cycle. The oler the machine, the higher the risk for backlash an the more problems in manufacturing goo quality threas. Computer generate Flexure epening on the tapping application, ifferent thrust forces are neee to start the tap into the hole an allow it to prouce accurate threas. Tapmatic s unique flexure geometry was evelope using the ANSYS finite element analysis software to provie the correct thrust forces for the range of tap sizes covere by each SynchroFlex tap holer. Ajustable Back Jaw The Back Jaws are opene an close with a hex key to grip the square of the tap. They are use in tools with rubber flex collet chucks because the rubber flex collet alone is not sufficient for riving the tap.

5 Prouct Line Inex escription Moel Page Self-reversing tapping attachments with pre-selective torque rive Automatic reverse with increase reverse ratio. For manually operate rilling an milling machines. X TC / C RX Inex Heavy uty self-reversing tapping attachment for machines with automatic fee SP / SP-QC 21 CNC tapping attachments For vertical an horizontal CNC machining centers, for continuous prouction. Extene spinles an interchangeable shanks available. RTIC RT RTICXT RCT SP CNC Special Moels 12/ /16 17/18/ /23 Synchro chucks with straight shanks to IN 1853B+E, HSK or steep taper For rigi tapping on CNC machines with/ without internal coolant, ER or QC-collets. SFT SX 24/25/26/27 28/29/30/31 Tap chucks with straight shanks IN 1835B+E or mores taper For use on NC machining centers or NC centre lathes an all machines with controlle fee. SM TA TIC NC/TIM 32 33/34 35/36 37 Quick-change aapters Moular accessories, compatible with the respective tapping attachment or chuck. T TC T-IK TC-IK TF/E/ Various accessories For use on attachments an chucks. Multi-range Clamping nuts Sealing gaskets Cooling gaskets ER-GB ER Various accessories For use an installation of attachments an chucks on intene machines. Shanks Arbors Torque wrenches Torque Bars Mounting evice Cutting fluis FERROFLUI for steel an stainless steel, ALUFLUI for aluminum an MINIFLUI for all materials, use in Minimum Quantity Lubrication System (MQL). FERROFLUI ALUFLUI MINIFLUI 49 TapWriter ot peen marking tool for in machine marking. TapWriter 50/51 5

6 Manual Applications Tapping attachments for manual tapping application Attachments RX extra for har to machine material an roll form tapping Tapping attachments for rilling an milling machines an pneumatic, hyraulic an electric spinles Since 1952 Tapmatic has manufacture the worl s most popular line of compact self-reversing tap ping attachments. Our experience an commitment to quality make them to efficient an goo value prouct. Although there are other proucts available on the market, a Tap matic hea is still the most economical to use. Our customers know they can count on our tools for many, many years of service. Tapmatic offers a complete program of self-reversing tapping attachments to meet the most ifficult requirements. Ruggely built, these Tapmatic tools provie higher prouction rates ue to: X for general tapping ecrease in tap breakage prouction of perfect threas, even with pre-caste holes reuce cycle time through increase 1.75 :1 reverse spee longer tap life accurate epth control better threa quality consistent trouble free performance interchangeable mounts right an left han tapping possible TC/C most suitable for short threas an fast reversion of rotation an accurate epth control As further moels, Tapmatic offers the SP an SP QC series. These types o not feature a pre-selective torque rive, but were constructe for higher torque. Because of the precise spinle guiance, the SP attachments are also suitable for rill taps (to bore an rill in one process). SP an SP-QC For rill taps (without har start) an manual tool change on machining centers 6

7 X Self-reversing tapping attachments with high-spee return an pre-selective torque rive L easy hanling, compact esign less tap breakage ue to pre-selective torque rive easy aaption because of multiple interchangeable arbors reuce cycle time through increase 1.75 :1 reverse spee only 2 multi-range collets (RF) per type necessary (exception 100XB) elivery: 2 wrenches necessary hex keys stop arm Multi-range collets RF as well as arbors not inclue! Attachments imensions Moel mm mm Self-fee mm T Weight kg 100XB X X X X Moel Capacity (steel) Collets RF Max. RPM Mounts S L mm Taper mounts Threa. mounts 100XB M0.5M2 117XB JT X M1.4M7 J JT J117 B B JT /16" /8" /2" /8" /4"16 50X M3M12 J JT J422 B JT /8" /2" /8" /4"16 70X M5M18 J JT J440 B /2" /8" /4" /8"20 90X M10M30 J JT J /2"18 Note: When using Roll Form Taps the tool s tapping capacity must be reuce by 25 %. Rubber Flex collets page 43. Interchangeable arbors page 47. Orer information: (50X-B16) + J421, J422 (RF collets) + MK2-B16 (arbor) Page 43 Page 47 Page 48 Cover Pages 5254 RF Multi-range Collets Arbors Torque Bar Selector Chart Spee Chart 7

8 TC/C Self-reversing tapping attachments with high-spee return, pre-selective torque control an epth control Attachments L ajustable an reucible epth control ue to knurle nut easy hanling, compact esign less tap breakage ue to ajustable slipping clutch easy aaption because of multiple interchangeable arbors reuce cycle time through increase 1.75 :1 reverse spee only 2 multi-range collets (RF) per type necessary (exception 100XB) elivery: 2 wrenches necessary hex keys stop arm Multi-range collets RF as well as arbors not inclue! imensions Moel mm mm Self-fee mm T Weight kg 30TC/C TC/C TC/C Moel Capacity (steel) Collets RF Max. RPM Mounts S L mm Taper mounts Threa. mounts 30TC/C M1.4M7 J JT J117 B B JT /16" /8" /2" /8"16 50TC/C M3M12 J JT J422 B JT /8" /2" /8"16 70TC/C M5M18 J JT J440 B /2" /8" /8"20 Note: When using Roll Form Taps the tool s tapping capacity must be reuce by 25 %. Rubber Flex collets page 43. Interchangeable arbors page 47. Orer information: (50TC/C-B16) + J421, J422 (RF collets) + MK2-B16 (arbor) Page 43 Page 47 Page 48 Cover Pages RF Multi-range Collets Arbors Torque Bar Selector Chart Spee Chart

9 RX Universal self-reversing tapping attachments with high-spee return L extra for har to machine material an roll form tapping less tap breakage ue to pre-selective torque rive reuce cycle time through increase 1.75 :1 reverse spee easy hanling, compact esign easy aaption because of multiple interchangeable arbors Attachments elivery: 2 wrenches necessary hex keys stop arm Multi-range collets RF as well as arbors not inclue! imensions Moel mm mm Self-fee mm T Weight kg RX RX RX Moel Capacity (steel) Collets RF Max. RPM Mounts S L mm Taper mounts Threa. mounts RX M1.4M7 J JT J117 B JT /8" /2"20 RX M3M12 J JT J422 B JT /2"20 RX M5M18 J JT J440 7/8"20 Note: When using Roll Form Taps the tool s tapping capacity must be reuce by 25 %. Rubber Flex collets page 43. Interchangeable arbors page 47. Orer information: (RX50-B16) + J421, J422 (RF collets) + MK2-B16 (arbor) Page 43 Page 47 Page 48 Cover Pages 5254 RF Multi-range Collets Arbors Torque Bar Selector Chart Spee Chart 9

10 RT. RTIC. RCT Tapping Attachments Threa prouction on machining centers with constant spee tapping CST Constant Spee Tapping relies on a compact tapping attachment to provie tap reversal. The machine spinle runs in one irection at the exact programme spee an reversal occurs within the tapping attachment instantaneously upon machine retraction. This avois the inevitable RPM fluctuations which occur with reversal of the machine spinle. Benefits inclue the following... CNC-Attachments Reuce Cycle Time By eliminating the machine spinles nee to ecelerate, stop, reverse an reaccelerate twice for each tappe hole the tapping time is ramatically reuce. Longer Tap Life, Improve Threa Quality Constant spee tapping means that the tap is allowe to cut at the optimum spee continuously without eceleration at the bottom of the hole. The result is the longest tap life an improve threa quality. RTIC Reuce Machine Spinle Wear Tapping is the only operation requiring machine reversal. Using a Constant Spee Tapping Hea eliminates this strain on the machine. RTIC-XT Reuce Energy Costs of up to 75 % CST attachments reuce the energy costs require by machine spinle reversal by 75 %. RCT Two Through the Spinle Lubrication Options Stanar balance high pressure coolant through the spinle. Minimum Quantity Lubrication, available on request. Patente Appliance esign TAPMATIC tapping attachments are fitte with a patente reversing gear as well as a patente ball rive. The ball rive allows for an exact, vibration-free an immeiate change over into reverse once the esire threa epth is reache. 10

11 RT. RTIC. RCT Tapping Attachments Avantages of tapping attachments with automatic reversal General Information Threa cutting is the only machining operation which requires a change of irection for the return of the tool. This can be laborious, it also causes wear an is a costly proceure for any machine. RT / RT-IC tapping attachment RT an RT-IC reversing tapping attachments are specially esigne for fastest threa manufacturing on CNC machining centres. They also eliminate reversal relate machine wear an tear an reuce energy consumption. The patente ball rive with integrate planet gear for automatic reversal creates an almost constant cutting spee an eliminates the nee to start the machine spinle twice per threa. By using the RT tapping attachments the cycle time is reuce an the life of the tap is increase. The IC-version allows coolant to flow irectly through the tapping hea. Constant spee tapping the secret of longer tap life RPM RPM Tapping with an attachement Reversal Fee in Fee out Time Tapping with a machine spinle reversal Reversal Fee in Fee out CNC-Attachments Case history: Application Threa cutting on a horizontal machining centre Fritz Werner TC800 with internal cooling. Time Power consumption for 144 threas M8 Material GG20 Tap M6 stanar threa HSS with TIN-AL coating KW Machine reversal 1500 UpM TAPMATIC 1500 UpM TAPMATIC 2500 UpM Energy cost saving of 75 % Not only is the shorter cycle time of importance, but also the constant spinle irection. By changing the irection (ecelerating an accelerating) of the spinle, higher spikes of power are neee, which can be prevente by constant spinle rotation. Threa M6 stanar threa, 9 mm eep, tapping rill ø 5.05 an 12.5 mm eep Spee Rigi tapping with spinle reversal, programme spee RPM (ø RPM reache: 513) Results Cycle time of 6 min 34 sec for 68 threas Change with TAPMATIC Using a TAPMATIC tapping attachment RT-IC50 with ER16 spinle, programme spee RPM. Improvement Cycle time reuce to 3 min 22 sec for 68 threas, tap life triple. Avantage Besies reucing the cycle time, tap life was consierably increase. Wirtschaftlichkeitsberechnung Costs Tapping attachment RT-IC Number of threas/part Number of parts Cycle time per part/min Cycle time in hours Machine hourly rate in Number of taps Tap costs in Prouction costs in Chuck costs in (approx.) Total costs in Cost reuction in 981 Totoal cost/year Saving Tap Minutes Tap Break Even Point Collets chuck with compensation Collet chuck RT-IC RT-IC Collet chuck Results reuction of cycle time by 50 % increase of prouction capacity tap life triple less machine wear (no spinle reversals) roughly 75 % energy savings by constant spee tapping Conclusion With the use of tapping attachments, the cycle time is less, which also increases prouctivity. Aitionally, machine repair / owntime is reuce, also tap an energy costs. 11

12 RTIC High spee tapping attachments with moular straight shank an internal coolant system CNC-Attachments (C) COOLANT SHANK L2 (A) L1 STOP BLOCK CENTER ISTANCE 42 L3 (B) Features an Avantages high spee self-reversing tapping for fastest cycle time rugge esign for years of prouction, with little maintenance high pressure internal coolant simple installation an programming large capacity How to Orer Please select the Tapping attachment (A), stop arm (B) an CAT, SK, or BT shank (C), to fit your machine. Accessories like steel collets, sealing gaskets, stop blocks are not inclue an have to be orere separately. Tapmatic can provie a complete tool reay to fit your machine. Please simply provie the information shown on installation page 55, fill in the form on the back cover or contact us irectly. (A) Tapping Attachment RTIC Cylinrical Shank Moel Capacity Shank Collets Max. RPM Weight kg L1 L2 (steel) RTIC M2M6 25 mm ER #41/4 1 RTIC LW16MS M4.5M12 25 mm ER LW16MS #101/2 1 RTIC85HS S M10M20 25 mm ER * S 7/16 3/4 1 RTIC85H S M12M25 25 mm ER * S 1/2 1 1 RTIC S M18M27 25 mm ER * S 3/4 1 1 on request * Please note that the size 85 an 100 tools have an 80 mm square housing with Ø 102 mm across corners. Notes: Other shanks are available on request. These internal coolant tools come stanar with sealing nuts. Tools for ER20 collets are also available on request. When using Roll Form Taps the tool s capacity must be reuce 25 %. (B) Stop Arm Assembly Center istance (42+L3) RTIC25 RTIC50 RTIC85 RTIC L3 Stop Block Page 55 Page 46 Pages 44, 45 Page 43 Cover Pages 5254 Pages 5557 (C) 12 Interchangeable Steep Taper Steel Collets Sealing Gaskets Selector Chart Spee Chart Installation Programming

13 RTIC High spee tapping attachments with integral HSK shank an internal coolant system COOLANT SHANK CENTER ISTANCE STOP BLOCK Features an Avantages high spee self-reversing tapping for fastest cycle time rugge esign for years of prouction, with little maintenance high pressure internal coolant simple installation an programming large capacity L1 L2 (A) (B) How to Orer Please select the Tapping attachment (A) an stop arm (B) to fit your machine. Accessories like steel collets, sealing gaskets, stop blocks are not inclue an have to be orere separately. CNC-Attachments 42 L3 Tapmatic can provie a complete tool reay to fit your machine. Please simply provie the information shown on installation page 55, fill in the form on the back cover or contact us irectly. 16 (A) Tapping Attachment RTIC HSK Shank Moel Capacity Shank Collets Max. RPM Weight kg L1 L2 (steel) RTIC H63LW16MS M4.5M12 HSK63A ER H80LW16MS #101/2 HSK80A H100LW16MS HSK100A RTIC85HS 4085H6325S M10M20 HSK63A ER * H8025S 7/16 3/4 HSK80A H10025S HSK100A RTIC85H 4085H6332S M12M25 HSK63A ER * H8032S 1/2 1 HSK80A H10032S HSK100A RTIC H6340S M12M25 HSK63A ER * H8040S 1/2 1 HSK80A H10040S HSK100A on request * Please note that the size 85 an 100 tools have an 80 mm square housing with Ø 102 mm across corners. Notes: Other shanks are available on request. These internal coolant tools come stanar with sealing nuts. Tools for ER20 collets are also available on request. When using Roll Form Taps the tool s capacity must be reuce 25 %. (B) Stop Arm Assembly Center istance (42+L3) RTIC50 RTIC L3 Stop Block Page 55 Pages 44, 45 Page 43 Cover Pages 5254 Pages 5557 Steel Collets Sealing Gaskets Selector Chart Spee Chart Installation Programming 13

14 RT High spee tapping attachments with moular straight shank, without internal coolant system (C) Features an Avantages high spee self-reversing tapping for fastest cycle time rugge esign for years of prouction, with little maintenance simple installation an programming large capacity CNC-Attachments SHANK L2 L1 (A) STOP BLOCK CENTER ISTANCE 42 L3 (B) How to Orer Please select the Tapping attachment (A), stop arm (B) an CAT, SK, or BT shank (C), to fit your machine. Accessories like steel collets, sealing gaskets, stop blocks are not inclue an have to be orere separately. Tapmatic can provie a complete tool reay to fit your machine. Please simply provie the information shown on installation page 55, fill in the form on the back cover or contact us irectly. 16 (A) Tapping Attachment RT Cylinrical Shank Moel Capacity Shank Collets Max. RPM Weight kg L1 L2 (steel) RT H M1M3 25 mm ER H #0#6 1 RT M2M6 25 mm ER #41/4 1 RT M4.5M12 25 mm ER /2 1 RT85HS M10M20 25 mm ER * /16 3/4 1 RT85H M12M25 25 mm ER * /2 1 1 RT M18M27 25 mm ER * /4 1 1 * Please note that the size 85 an 100 tools have an 80 mm square housing with Ø 102 mm across corners. Notes: When using Roll Form Taps the tool s capacity must be reuce 25 %. (B) Stop Arm Assembly Center istance (42+L3) RT15 RT25 RT50 RT85 RT L3 Stop Block Page 55 Page 46 Pages 44, 45 Page 43 Cover Pages 5254 Pages 5557 (C) 14 Interchangeable Steep Taper Steel Collets Sealing Gaskets Selector Chart Spee Chart Installation Programming

15 RTICXT50 Extene length tapping attachments with integral HSK shank an internal coolant system COOLANT SHANK L2 (A) L1 () CENTER ISTANCE STOP BLOCK (B) Features an Avantages high spee self-reversing tapping for fastest cycle time extene length for ifficult to reach holes rugge esign for years of prouction, with little maintenance RTICXT50 for high pressure internal coolant simple installation an programming How to Orer Please select the Tapping attachment (A), stop arm (B), SK or BT shank (C) an collet chuck () to fit your application. Accessories like steel collets, sealing gaskets, stop blocks are not inclue an have to be orere separately. CNC-Attachments L L3 Tapmatic can provie a complete tool reay to fit your machine. Please simply provie the information shown on installation page 55, fill in the form on the back cover or contact us irectly. 16 (A) Tapping Attachment RTICXT50 HSK Shank, Internal Coolant System Moel Capacity Shank Max. RPM Weight kg L1 L2 (steel) RTICXT H63241 M4.5M12 HSK63A H80245 #101/2 HSK80A H HSK100A RTICXT H63305 M4.5M12 HSK63A H80309 #101/2 HSK80A H HSK100A Notes: Special extene length tools are also available on request. When using Roll Form Taps the tool s capacity must be reuce 25 %. (B) Stop Arm Assembly Center istance (42+L3) RT50 L () Collet Chuck Collets L4 1 Seal Nut ER S ER S Stop Block Page 55 Page 46 Pages 44, 45 Page 43 Cover Pages 5254 Pages 5557 (C) Interchangeable Steep Taper Steel Collets Sealing Gaskets Selector Chart Spee Chart Installation Programming 15

16 RTICXT50. RTXT50 Extene length tapping attachments with moular straight shank CNC-Attachments COOLANT SHANK L1 L2 (A) (C) STOP BLOCK CENTER ISTANCE (B) Features an Avantages high spee self-reversing tapping for fastest cycle time extene length for ifficult to reach holes rugge esign for years of prouction, with little maintenance RTICXT50 for high pressure internal coolant. RTXT50 for machines without internal coolant simple installation an programming How to Orer Please select the Tapping attachment (A), stop arm (B), an collet chuck () to fit your application. Accessories like steel collets, sealing gaskets, stop blocks are not inclue an have to be orere separately. L4 () 1 Tapmatic can provie a complete tool reay to fit your machine. Please imply provie the information shown on installation page 55, fill in the form on the back cover or contact us irectly. 42 L3 (A) Tapping Attachment RTICXT50 Cylinrical Shank, Internal Coolant System Moel Capacity Shank Max. RPM Weight kg L1 L2 (steel) RTICXT M4.5M12 25 mm #101/2 1 RTICXT M4.5M12 25 mm #101/2 1 (A) Tapping Attachment RTICXT50 Cylinrical Shank, without Internal Coolant System Moell Capacity Shank Max. RPM Weight kg L1 L2 (steel) RTXT M4.5M12 25 mm #101/2 1 RTXT M4.5M12 25 mm #101/2 1 Notes: Special extene length tools are also available on request. When using Roll Form Taps the tool s capacity must be reuce 25 %. (B) Stop Arm Assembly Center istance (42+L3) RT50 L Stop Block Page 55 () Collet Chuck Collets L4 1 Seal Nut ER S ER S Collets L4 1 Stanar Nut ER ER Page 46 Pages 44, 45 Page 43 Cover Pages 5254 Pages 5557 (C) 16 Interchangeable Steep Taper Steel Collets Sealing Gaskets Selector Chart Spee Chart Installation Programming

17 RCT50 High spee tapping attachments with integral HSK shank an internal coolant system The RCT50 moels are our newest series of self-reversing tapping attachments for CNC machining centers. Many years of experience, in emaning high prouction applications, have gone into the evelopment of the RCT. They are ruggely built to provie years of service at high spee an inclue our newly evelope high pressure internal coolant system. RCT stans for Reuce Cycle Time tapping. For high prouction tapping there is no faster way to tap. Eliminating machine reversal also saves wear an tear to the machine spinle cause by stopping an reversing two times for every tappe hole. It also reuces power consumption by as much as 75 %, making it the greenest an most economical way to tap holes. SHANK COOLANT CENTER ISTANCE STOP BLOCK Features an Avantages high spee self-reversing tapping for fastest cycle time rugge esign for years of prouction, with little maintenance high pressure internal coolant system simple installation an programming How to Orer Please select the Tapping attachment (A) an stop arm (B) to fit your machine. Accessories like steel collets, sealing gaskets, stop blocks are not inclue an have to be orere separately. Tapmatic can provie a complete tool reay to fit your machine. Please simply provie the information shown on installation page 55, fill in the form on the back cover or contact us irectly. CNC-Attachments L1 L2 (A) (B) 42 L3 16 (A) Tapping Attachment RCT HSK Moel Capacity (steel) RCT H6316 M4.5M12 #101/2 RCT H8016 M4.5M12 #101/2 RCT H10016 M4.5M12 #101/2 Shank Collets Max. RPM Weight kg L1 L2 HSK63A ER HSK80A ER HSK100A ER Notes: ER20 spinle also available on request. These internal coolant tools come stanar with sealing nuts. When using Roll Form Taps the tool s capacity must be reuce 25 %. (B) Stop Arm Assembly Center istance (42+L3) RT50 L Stop Block Page 55 Page 44, 45 Page 43 Cover Pages 5254 Pages 5557 Steel Collets Sealing Gaskets Selector Chart Spee Chart Installation Programming 17

18 RCT50 High spee tapping attachments with integral shank an internal coolant system SHANK COOLANT CENTER ISTANCE STOP BLOCK Features an Avantages high spee self-reversing tapping for fastest cycle time rugge esign for years of prouction, with little maintenance high pressure internal coolant system simple installation an programming CNC-Attachments L1 L2 (A) (B) How to Orer Please select the Tapping attachment (A) an stop arm (B) to fit your machine. Accessories like steel collets, sealing gaskets, stop blocks are not inclue an have to be orere separately. 42 L3 Tapmatic can provie a complete tool reay to fit your machine. Please simply provie the information shown on installation page 55, fill in the form on the back cover or contact us irectly. 16 (A) Tapping Atachment RCT CAT, SK or BT Moel Capacity Shank Collets Max. RPM Weight kg L1 L2 (steel) RCT C4016 M4.5M12 CAT40 ER #101/2 RCT C5016 M4.5M12 CAT50 ER #101/2 RCT SK4016 M4.5M12 SK40 ER #101/2 RCT SK5016 M4.5M12 SK50 ER #101/2 RCT B4016 M4.5M12 BT40 ER #101/2 RCT B5016 M4.5M12 BT50 ER #101/2 Notes: ER20 spinle also available on request. These internal coolant tools come stanar with sealing nuts. When using Roll Form Taps the tool s capacity must be reuce 25 %. (B) Stop Arm Assembly Center L3 istance (42+L3) Stop Block Page 55 Pages 44, 45 Page 43 Cover Pages 5254 Pages Steel Collets Sealing Gaskets Selector Chart Spee Chart Installation Programming

19 RCT150 Large capacity tapping attachments with moular straight shank an internal coolant system The RCT150 is our new, large capacity self-reversing tapping attachment for CNC machining centers. Heavy uty precision gearing transmits high torque for reversing tap sizes up to M42. They are ruggely built to provie years of service, an inclue high volume, high pressure internal coolant. The RCT150 was evelope for the large tapping applications require by the win energy, heavy inustry, an power generation fiels. By eliminating machine spinle reversal, cycle time is ramatically improve, electrical power consumption is reuce by as much as 75 % an wear an tear to the machine spinle cause by stopping an reversing twice for each tappe hole is eliminate. Features an Avantages high spee self-reversing tapping for fastest cycle time rugge esign for years of prouction, with little maintenance high pressure internal coolant system simple installation an programming How to Orer Please select the Tapping attachment (A), stop arm (B) an CAT, SK, or BT shank (C), to fit your machine. Accessories like steel collets, sealing gaskets, stop blocks are not inclue an have to be orere separately. CNC-Attachments COOLANT SHANK (C) STOP BLOCK CENTER ISTANCE Tapmatic can provie a complete tool reay to fit your machine. Please simply provie the information shown on installation page 55, fill in the form on the back cover or contact us irectly. L1 L2 (A) (B) 67 L (A) Tapping Attachment RCT150 Cylinrical Shank Moel Capacity Shank Collets Max. RPM Weight kg L1 L2 (steel) RCT M25M42 40 mm ER /8 Notes: When using Roll Form Taps the tool s capacity must be reuce 25%. (B) Stop Arm Assembly Center istance (67+L3) RCT150 L Stop Block Page 55 Page 46 Pages 44, 45 Page 43 Cover Pages 5254 Pages 5557 (C) Interchangeable Steep Taper Steel Collets Sealing Gaskets Selector Chart Spee Chart Installation Programming 19

20 SP CNC Economical tapping attachments with moular straight shank CNC-Attachments The SP CNC are low cost, self-reversing tapping attachments for CNC machining centers. They use ER collets an employ a simple stop arm system for easy installation on machines with automatic tool change. The SP CNC were evelope specifically for short run job shop applications. Their low cost make them economical to use, an they provie all the avantages associate with the elimination of machine spinle reversal. Faster cycle time, elimination of machine spinle wear an tear ue to reversal, lower energy costs an longer tap life. SHANK (C) TORQUE BAR STOP ARM Features an Avantages faster cycle time eliminates machine reversal for lower energy costs an reuce wear to machine spinle ER collets simple installation with torque bar an stop arm Stop Arm Assembly inclue simple programming How to Orer Please select the Tapping attachment (A) an CAT, SK or BT shank (C) to fit your machine. Please orer accessories like collets, an torque bars separately. Please note the tool comes with a stop arm that can be moifie or you can also orer a reaymae stop arm to fit your machine s bolt circle. Torque bar holers (B) are not inclue an nee to be matche with your machine. L2 (A) L1 71 (A) Tapping Attachment SP CNC Cylinrical Shank Moel Shank Capacity Collets Max. RPM Weight kg L1 L2 (steel) SP CNC mm M2M6 ER #41/4 SP CNC mm M4.5M12 ER #101/2 Notes: The SP CNC tools inclue a stop arm assembly, but it is possible to use the RT25 an 50 stop arm assemblies with them as well. When using Roll Form Taps the tool s capacity must be reuce 25 %. Stop Arm Plate istance spinle centre mm (B) Torque Bar Holer Assemblies Page 55 Page 46 Pages 44, 45 Cover Pages 5254 Pages 5557 (C) 20 Interchangeable Steep Taper Steel Collets Selector Chart Spee Chart Installation Programming

21 SP. SP-QC Tapping attachments with automatic reversal for conventional machines Features an Avantages rugge esign short imensions 1:1 conversion for fee an return motion for heavy applications like rill tapping or roll form tapping L L elivery Stanar accessories inclue 2 wrenches, all necessary hex keys an a stop arm. Please orer the necessary 2 multi-range collets an arbor separately. CNC-Attachments imensions Moel mm mm Self-fee mm Weight kg SP SP SP SP-9A SP-3 QC SP-5 QC SP-7 QC SP-9A QC SP-11 QC Note: When using Roll Form Taps the tool s tapping capacity must be reuce by 25%. RF Multi-range collets see page 43. Interchangeable arbors see page 47. Moel Capacity (steel) Collets Max. RPM Mounts S L mm Taper mounts Threa. mounts SP M1.4M7 J B J117 JT /8" /2" /8" /4" SP M3M12 J B J422 JT /8" /2" /8" /4" /8" SP M5M18 J JT J440 1/2" /8" /8" SP-9A M10M30 J JT J /2" SP-3 QC M1.4M B T0 JT TC0 3/8" /2" /8" /4" SP-5 QC M3M B T1 JT TC1 1/2" /8" /8" SP-7 QC M5M JT T2 1/2" TC2 5/8" /8" SP-9 QC M10M30 3, T3 600 JT TC3 1 1/2" SP-11 QC M22M42 T4, TC /4" Page 43 Page 48 Page 47 Pages 38, 39, 42 Cover Pages 5557 RF Multi-range Collets Torque Bar Arbors Quick-Change Aapters Selector Chart Installation Programming 21

22 Special Moels Tapping attachments with VI shank for CNC centre lathes Moel RSR Features an Avantages automatic reversal length compensation steel collets ER-GB (ER) moular VI shank acc. to IN (VI3425) CNC-Attachments Moel ASR Application On CNC-lathes with activate tools an VI shank. Raial Tapping Attachment RSR Moel Capacity (steel) Collets ER Max. RPM RSR M4.5M12 ER Axial Tapping Attachment ASR Moel Capacity (steel) Collets ER Max. RPM ASR M2.5M7 ER ASR M4.5M12 ER ASR M6M16 ER Note: Steel collets an VI shank have to be orere separately. The VI shank is manufacture iniviually for your lathe. When using Roll Form Taps the chuck s tapping capacity must be reuce by 25 %. imensions for the attachments available on request. Right angle tapping attachment RSR50 VMC self-reversing right angle tapping attachment for machining centers capacity: M4.5M12 simple installation an programming, suitable for machines with automatic tool change on request Pages 44, 45 Cover Pages 5254 Pages Steel Collets Selector Chart Spee Chart Installation Programming

23 Special Moels High spee tapping attachments with automatic reversal for CNC machines The I moels are particularly suitable for CNC machines with limite space in the tool magazine. With its outsie iameter of only 65 mm the unit occupies only one station in the tool change magazine. Features an Avantages low-friction cushione rive up to 2500 RPM length compensation accurate threa epths steel collets ER-GB (ER) ifferent shank versions: straight shank, HSK renewable rive systems internal coolant system (max. 50 bar) reuce machine spinle wear shorter cycle time increase tap life reuction in energy consumption CNC-Attachments Application On CNC machining centers with automatic tool changer (bore cycle G85) or moifie an efficient sub routine. elivery Stanar accessories inclue 2 wrenches an all necessary hex keys. The require stop arm, sealing gaskets as well as ER-GB (ER) steel collets have to be orere separately. Moel Capacity (steel) Max. RPM Straight shank S Collets ER Weight kg Ø mm I M4.5M ER Note: When using Roll Form Taps the chuck s tapping capacity must be reuce by 25%. Various moels with HSK shank on request. (B) Stop Arm Assembly Center istance Stop Block Page 55 Pages 44, 45 Pages 5254 Pages 5557 Steel Collets Spee Chart Installation Programming 23

24 SynchroFlex Tap holers for synchronize tapping cycles General Information Moern CNC machines have the capability of synchronizing the spinle rotation to match the fee avance for a specific tap pitch. The «Rigi» or synchronize tapping cycle is very accurate, but it is impossible to avoi small iscrepancies between the machine synchronization an the actual pitch of the specific tap being use. Using a rigi tap holer means that any eviation at all increases the thrust forces acting on the tap an this ramatically reuces tap life. Synchro Chucks SynchroFlex Force vs. eflection Rates Unlike competitors that employ elastomer rings to provie a small amount of axial compensation (±0.5 mm), the SynchroFlex flexure has a consistent force vs. eflection rate. This means consistently superior tap life an threa quality. Thrust (N) SFT100 SFT75 SFT50 SFT10 0,1 0,2 0,3 0,4 0,5 eflection (mm) SynchroFlex The Unique Solution Each holer is mae with a precisely machine flexure which provies axial an raial compensation for the unavoiable iscrepancy between the machine fee avance an the actual tap pitch. By compensating for this error, the thrust forces acting on the tap are ramatically reuce. The result is the longest possible tap life, 100 % improvement or more, an much better quality threas. Unique flexor Axial micro compensation is closely limite (mechanically secure) Torque is transmitte through the rive pins not through the flexure. By limiting the axial compensation travel, an torsional forces acting on the flexure, millions of holes can be tappe without causing the SynchroFlex holer to fatigue, take a set, or wear out. Below is an example of stress analysis at maximum compression. esign an evelopment Flexure geometries have been esigne using the ANSYS finite element analysis metho in orer to achieve the optimal force vs. eflection rates for the tap capacity of each holer. As you can see from the cross section rawing, torque is transmitte through the rive pins not through the flexure. 24

25 SynchroFlex Comparison tapping with an M6 spiral flute tap in 6061 Aluminum to epth of 18 mm. Test Results SynchroFlex tap holers have been teste by tap manufacturers all over the worl an they have confirme the ramatic improvement in tap life, an threa quality resulting from the reuction of thrust forces acting on the tap. Thrust (N) The graph to the left is an example of a test conucte by an inepenent tap manufacturer using a Kistler ynamometer to measure the thrust forces uring the tapping process. As you can see from the graph, although the competitive holers o reuce thrust forces compare to a rigi tap holer, they are not as effective as SynchroFlex. epth Tapmatic SFT50 Competitor 1 Case History Competitor 2 Rigi Tap Holer Case History Synchro Chucks Application: Threa cutting on horizontal machining center rigi tapping uring an unmanne shift. Material: 42CrMo4V steel, heat treate to 650 N/mm 2 Tap Size: M8 x 1 Lubrication: Coolant, oil emulsion 6 % Results: With the tap hel in a rigi holer the life was just components per tap. Improvement with SynchroFlex Tap life increase to to components per tap saving the customer not only in tap costs, but the ability to run without interruption through the entire unmanne shift. Application: Threa cutting on machining center rigi tapping. Material: CF8M steel casting Tap Size: #10-32 Lubrication: Coolant Results: With the tap hel in a rigi holer the life was just 72 holes per tap. Improvement with SynchroFlex Tap life increase to more than 216 holes per tap in this ifficult material saving the customer not only in tap costs, but by also reucing his own time cause by frequent tap replacement. Total cost/year Break Even Point Total cost/year Break Even Point Saving Tap Tap Collet chuck SynchroFlex Saving Tap Collet chuck SynchroFlex SynchroFlex Tap Collet chuck SynchroFlex Collet chuck Evaluation of economic efficiency Costs SynchroFlex chuck Number of threas / year Number of threas / tap Number of taps / year Price / tap in Tap costs in Chuck costs in (approx.) Total costs in / year Cost reuction in / year 404 Collet chuck without compensation Evaluation of economic efficiency Costs SynchroFlex chuck Number of threas / year Number of threas / tap Number of taps / year Price / tap in Tap costs in Chuck costs in (approx.) Total costs in / year Cost reuction in / year Collet chuck without compensation 25

26 SynchroFlex Overview of the SynchroFlex program Available with QC spinle Accepts the stanar Quick Change aapters or Tapmatic s ER collet chuck QC aapters for improve tap grip. Picture with ER-collet, spinle an straight shank Synchro Chucks Four Sizes to Cover a Wie Range of Taps SFT10 with capacity M2 M5 or #2 #10 SFT50 with capacity M4 M12 or #8 #1/2 SFT75 with capacity M8 M20 or 1/4 3/4 SFT100 with capacity M16 M30 or 5/8 1 Integral shank moels Tapmatic offers stanar integral shank HSK an Tapmatic Capto tools. We can also offer integral Steep Taper shank tools but in most cases we recommen a moular system using a cylinrical shank SynchroFlex together with our Short Projection SK, BT or CAT shank. High Pressure Internal Coolant Minimum Quantity Lubrication No hole beyon your reach Four stanar extensions are available which increase the tool length by 50, 100, 150, or 200 mm. Special extensions are also available to fit your specific application. Our extensions keep the flexure in close proximity to the tap ensuring the best performance. Internal Coolant an MQL Tapmatic s high pressure internal coolant system may be use at pressures up to 80 bar without affecting the axial compensation. Tapmatic also can provie tools reay for Minimum Quantity Lubrication through the spinle. Our system provies irect flow of air an lubricant to the back of the tap. 26

27 SynchroFlex Synchronous fee tap holers with moular straight shank, with or without internal coolant system Features an Avantages increase tap life by 100 % or more improves threa quality reuces owntime by lowering frequency of tap replacement wie range of sizes available with ER collet or Quick Change chuck available with high pressure internal coolant system up to 80 bar (Balance Coolant System) ER Collet Chuck Quick-Change How to Orer Please select the tap holer (A) an SK or BT shank (B), to fit your machine. For Quick Change moels orer ER collet aapter (C) shown below or stanar aapters shown in accessories section. Please orer accessories like collets an sealing gaskets separately as they are not inclue. (B) COOLANT SHANK (A) L (A) Tap Holer SFT Cylinrical Shank, ER Collet Chuck Moel no BCS Capacity (steel) Shank Collets Weight kg L for BCS version SFT M2M5 25 mm ER #2# mm / mm /8 SFT M4.5M12 25 mm ER S #81/ S mm S SFT M8M20 25 mm ER S /4 3/ S SFT M16M30 25 mm ER S / Note: The SFT high pressure coolant moels (BCS) inclue a sealing isk nut which as 5 mm to «L» imension. When using Roll Form Taps the tool s capacity must be reuce 25 %. L Synchro Chucks COOLANT SHANK (A) Tap Holer SFT Cylinrical Shank, Quick-Change Moel no BCS Capacity (steel) Shank Aapter Weight kg L for BCS version L L L1 (A) (C) 1 SFT QC M4M12 25 mm Nr QCS QC #8 #1/ QCS QC 20 mm QCS SFT QC M8M16 25 mm Nr QCS QC #1/4 5/ QCS SFT QC M16M30 25 mm Nr QCS QC 1/2 7/ QCS Note: When using Roll Form Taps the tool s capacity must be reuce 25 %. (C) ER collet aapter with Stanar Nut Aapter Collets 1 L1 with Seal Nut for BCS version L Nr. 1 ER S Nr. 1 ER S Nr. 2 ER S 43 Page 46 Pages 44, 45 Page 43 Cover Pages 5254 Page 57 (C) Interchangeable Steep Taper Steel Collets Sealing Gaskets Selector Chart Spee Chart Programming 27

28 SynchroFlex Synchronous fee tap holers with integral HSK shank, with internal coolant system Features an Avantages increase tap life by 100 % or more improves threa quality reuces owntime by lowering frequency of tap replacement wie range of sizes available with ER collet or Quick Change chuck available with high pressure internal coolant system up to 80 bar. (Balance Coolant System) also available for Minimum Quantity Lubrication (MQL) through the spinle on request How to Orer Please select the tap holer (A) incluing the HSK shank, to fit your machine. For Quick Change moels orer ER collet aapter (C) shown below or stanar aapters shown in Accessories section. Please orer accessories like collets an sealing gaskets separately as they are not inclue. Synchro Chucks SHANK COOLANT L (A) (A) Tap Holer SFT HSK Shank, ER Collet Chuck, Internal Coolant System Moel with internal coolant Capacity (steel) Shank Collets Weight kg L SFT H6320S M4M12 HSK63A ER H8020S #81/2 HSK80A H10020S HSK100A SFT H6325S M8M20 HSK63A ER H8025S 1/4 3/4 HSK80A H10025S HSK100A SFT H6340S M16M30 HSK63A ER H8040S 5/8 1 HSK80A H10040S HSK100A Note: The SFT high pressure coolant moels (BCS) inclue a sealing isk nut which as 5 mm to «L» imension. Other shanks an sizes available on request. When using Roll Form Taps the tool s capacity must be reuce 25 %. COOLANT (A) Tap Holer SFT HSK Shank, Quick-Change, Internal Coolant System SHANK L (A) Moel with internal coolant Capacity (steel) Shank Aapter Weight kg L SFT H63QCS M4M12 HSK63A Nr H80QCS #81/2 HSK80A H100QCS HSK100A SFT H63QCS M8M16 HSK63A Nr H80QCS 1/4 5/8 HSK80A H100QCS HSK100A SFT H63QCS M16M30 HSK63A Nr H80QCS 1/2 7/8 HSK80A H100QCS HSK100A Note: Other shanks an sizes available on request. When using Roll Form Taps the tool s capacity must be reuce 25 %. (C) L1 1 (C) ER Collet Aapter with Stanar Nut Aapter Collets 1 L1 with Seal Nut L Nr. 1 ER S Nr. 1 ER S Nr. 2 ER S 43 Pages 44, 45 Page 43 Cover Pages 5254 Page Steel Collets Sealing Gaskets Selector Chart Spee Chart Programming

29 SynchroFlex Synchronous fee tap holers with Tapmatic Capto shank, with internal coolant system Features an Avantages increase tap life by 100 % or more improves threa quality reuces owntime by lowering frequency of tap replacement wie range of sizes available with ER collet or Quick Change chuck available with high pressure internal coolant system up to 80 bar. (Balance Coolant System) How to Orer Please select the tap holer (A) incluing the Tapmatic Capto shank, to fit your machine. For Quick Change moels orer ER collet aapter (C) shown below or stanar aapters shown in Accessories section. Please orer accessories like collets an sealing gaskets separately as they are not inclue. SHANK COOLANT L (A) (A) Tap Holer SFT Tapmatic Capto Shank, ER Collet Chuck, Internal Coolant System Moel for BCS version Capacity (steel) Shank Collets Weight kg L SFT C420S M4M12 C4 ER C520S #81/2 C C620S C C820S C SFT C525S M8M20 C5 ER C625S 1/4 3/4 C C825S C SFT C640S M16M30 C6 ER C840S 5/8 1 C Synchro Chucks Note: The SFT high pressure coolant moels (BCS) inclue a sealing isk nut which as 5 mm to «L» imension. Other shanks an sizes or tools without internal coolant available on request. When using Roll Form Taps the tool s capacity must be reuce 25 %. SHANK COOLANT (A) Tap Holer SFT Tapmatic Capto Shank, Quick-Change, Internal Coolant System Moel for BCS version Capacity (steel) Shank Aapter Weight kg L L (A) SFT C4QCS M4M12 C4 Nr C5QCS #81/2 C C6QCS C C8QCS C SFT C5QCS M8M16 C5 Nr C6QCS 1/4 5/8 C C8QCS C SFT C6QCS M16M30 C6 Nr C8QCS 1/2 7/8 C Note: Other shanks an sizes or tools without internal coolant available on request. When using Roll Form Taps the tool s capacity must be reuce 25 %. (C) (C) ER Collet Aapter L1 1 with Stanar Nut Aapter Collets 1 L1 with IC-nut for BCS version L Nr. 1 ER S Nr. 1 ER S Nr. 2 ER S 43 Pages 44, 45 Page 43 Cover Pages 5254 Page 57 Steel Collets Sealing Gaskets Selector Chart Spee Char Programming 29

30 SelectaFlex Synchronous fee tap holers with micro length compensation L Features an Avantages for backlash compensation in axial an raial irection eliminates pressure on the tap, thereby perfect threas an up to ouble tap life ajustable har start for ifficult prouction (Roll Form Tapping) or special materials, etc. steel collets ER-GB, moular shank versions internal coolant system up to 30 bar (BCS version for up to 80 bar) How to Orer Please select the tap holer (A) an SK or BT shank (B), to fit your machine. Please orer accessories like collets an sealing gaskets separately as they are not inclue. Synchro Chucks (A) Tap Holer SelectaFlex Cylinrical Shank an Welon Flat, Ajustable Thrust Moel Capacity Straight shank Collets Length imensions Weight L no BCS (steel) Ø mm compensation L mm mm mm kg for BCS mm version SX M2M5 25 ER11 ± S 52 SX M4M12 25 ER20 ± S 68 SX M10M20 25 ER25 ± S 88 SX M20M25 25 ER40 ± S 121 SX M22M48 40 ER50 ± S 158 Note: When using internal coolant of more than 30 bar, we recommen using our Balance Coolant System. The SX high pressure coolant moels (BCS) inclue a sealing isk nut which as 5 mm to «L» imension. When using Roll Form Taps, the chuck s tapping capacity must be reuce by 25 %. Ajustable Har start Page 46 Pages 44, 45 Page 43 Cover Pages 5254 Page 57 (C) 30 Interchangeable Steep Tapers Steel Collets Sealing Gaskets Selector Chart Spee Chart Programming

31 SelectaFlex SelectaFlex synchro tapping chuck with HSK-A taper, moular Moel toolholer Taper HSK-A Capacity (steel) Collets imensions mm Weight L kg L SX10 S-451 HSK50 M2M5 ER S-461 HSK S-481 HSK S-411 HSK SX50 S-451 HSK50 M4M12 ER (144) S-461 HSK S-481 HSK (168) 3.2 S-411 HSK SX75 S-451 HSK50 M10M20 ER (164) S-461 HSK S-481 HSK (188) 3.7 S-411 HSK SX100 S-461 HSK63 M20M25 ER (221) S-481 HSK S-411 HSK SX150 S-436 HSK63 M22M48 ER (278) S413 HSK (263) 4.7 max. pressure IC 30 bar (S-version with IC-nut for IC up to 80 bar) Note: When placing an orer, please mention moel an orer number of toolholer. By means of the setscrew, thrust can be ajuste accoring to the processing after the toolholer has been remove. Synchro Chucks SelectaFlex synchro tapping chuck with SK toolholer acc. IN 69871A/, moular L Moel toolholer Steep taper IN A/ Capacity (steel) Collets imensions mm Weight L kg SX10 S-242 SK40 M2M5 ER S-252 SK SX50 S-242 SK40 M4M12 ER20 98 (103) S-252 SK SX75 S-242 SK40 M10M20 ER (123) S-252 SK SX100 S-242 SK40 M20M25 ER (156) S-252 SK SX150 S-244 SK40 M22M48 ER (246) S-254 SK50 ER (226) 4.9 max. pressure IC 30 bar (S-version with IC-nut for IC up to 80 bar) Note: When placing an orer, please mention moel an orer number of toolholer. By means of the setscrew, thrust can be ajuste accoring to the processing after the toolholer has been remove. SelectaFlex synchro tapping chuck with BT toolholer acc. MAS 403, moular L Moel toolholer Steep taper BT MAS 403 Capacity (steel) Collets imensions mm Weight L kg SX10 S-342 BT40 M2M5 ER S-352 BT SX50 S-342 BT40 M4M12 ER20 98 (103) S-352 BT SX75 S-342 BT40 M10M20 ER (123) S-352 BT SX100 S-342 BT40 M20M25 ER (156) S-352 BT SX150 S-344 BT40 M22M48 ER (236) S-354 BT max. pressure IC 30 bar (S-version with IC-nut for IC up to 80 bar) Note: When placing an orer, please mention moel an orer number of toolholer. By means of the setscrew, thrust can be ajuste accoring to the processing after the toolholer has been remove. 31

32 SM Tapping chucks with moular straight shank IN 1835B+E for multi-range collets (RF) S Tapping chuck with increase self-fee tension an compression to accommoate excessive synchronization. L2 H T L1 L3 Features an Avantages increase self-fee tension an compression ajustable har start right han an left han tapping multi-range collets (RF), ajustable back jaw imensions Moel mm mm L1 mm L2 mm L3 mm Weight kg SM SM SM SM SM SM SM SM elivery 2 wrenches necessary hex keys stop arm Multi-range collets RF not inclue! Shanks Moel Capacity (steel) Straight shank Collets Self-fee mm Ø mm Rubber Flex Tension T Compression H SM M1.4M7 16 J116, J SM SM M3M12 16 J421, J SM SM SM M5M18 20 J440, J SM SM M10M30 25 J461, J Tapping chucks with morse taper arbor IN 228B for multi-range collets (RF) Tapping chuck with increase self-fee tension an compression to accommoate excessive synchronization. L1 L2 H L3 Features an Avantages increase self-fee tension an compression ajustable har start right han an left han tapping multi-range collets (RF), ajustable back jaw imensions T Moel mm mm L1 mm L2 mm L3 mm Weight kg SM SM SM SM elivery 2 wrenches necessary hex keys stop arm Multi-range collets RF not inclue! Moel Capacity (steel) Morse taper Collets Self-fee mm MT Rubber Flex Tension T Compression H SM M1.4M7 2 J116, J SM M3M12 2 J421, J SM M5M18 3 J440, J SM M10M30 4 J461, J Page 43 Cover Pages 5254 Page RF Multi-range Collets Selector Chart Spee Chart Programming

33 TA Tapping chucks with moular straight shank IN 1835B+E, quick-change version S The TA tapping chuck with tension/compression, with its quick change spinle the taps can be change in secons. L2 L1 Features an Avantages self-fee tension an compression har start an front release right han an left han tapping short construction Z T H imensions Moel mm mm L1 mm L2 mm TA TA TA TA TA TA TA2-032 TA TA Moel Capacity (steel) Straight shank Tap aapters Self-fee mm Front relase Ø mm Tension T Compression H Z mm TA M1M10 16 T0, TC0, E0, TF TA M1M10 20 T0, TC0, E0, TF TA M3M14 16 T1, TC1, E1, 1, TF TA M3M14 20 T1, TC1, E1, 1, TF TA M3M14 25 T1, TC1, E1, 1, TF TA M4.5M24 25 T2, TC2, E2, 2, TF TA M4.5M24 32 T2, TC2, E2, 2, TF TA M14M36 32 T3, TC3, 3, TF TA M22M48 40 T4, TC Note: When using Roll Form Taps the chuck s tapping capacity must be reuce by 25 %. The quick-change aapters have to be orere separately, see pages 38, 39, 42. Shanks Tapping chucks with HSK shank IN 69893A, quick-change version on request Page 46 Pages 38, 39, 42 Cover Pages 5254 Page 57 (C) Interchangeable Steep Taper Quick-Change Aapters Selector Chart Spee Chart Programming 33

34 TA Tapping chucks with morse taper shank IN 228B, quick change version L2 L1 Tapping chuck acc. to IN 228B with tension/compression, with its quick change spinle the taps can be change in secons. Features an Avantages self-fee tension an compression har start an front release right han an left han tapping short construction Z T H imensions Moel mm mm L1 mm L2 mm TA0-MT TA0-MT TA1-MT TA2-MT TA3-MT TA4-MT Shanks Moel Capacity (steel) Morse taper Tap aapters Self-fee mm Front release MT Tension T Compression H Z mm TA0-MT M1M10 1 T0, TC TA0-MT E0, TF0 TA1-MT M3M14 2 T1, TC TA1-MT E1, 1, TF1 TA2-MT M4.5M24 3 T2, TC TA2-MT E2, 2, TF2 TA2-MT TA3-MT M14M36 4 T3, TC TA3-MT , TF3 TA4-MT M22M48 5 T4, TC TA4-MT Note: When using Roll Form Taps the chuck s tapping capacity must be reuce by 25 %. The quick-change aapters have to be orere separately, see pages 38, 39, 42. Tapping chucks with other shank versions an quick-change version Steep taper shank IN 69871A Steep taper shank MAS-BT (JIS B6339) Steep taper shank IN 2080 ABS-coupling (System Komet) Straight shank IN (VI 3425) on request Pages 38, 39, 42 Cover Pages 5254 Page Quick-Change Aapters Selector Chart Spee Chart Programming

35 TIC Tapping chucks with moular straight shank to IN 1835B+E, internal coolant system S IC L2 L1 Tapping chuck with internal coolant system an self-fee tension an compression an quick-change spinle, where the tap can be change in secons. Features an Avantages self-fee tension an compression har start an front release right han an left han tapping internal coolant system (max. 50 bar) short construction Z T H imensions Moel mm mm L1 mm L2 mm TIC TIC TIC Moel Capacity (steel) Straight shank Tap aapters Self-fee mm Front release Ø mm Tension T Compression H Z mm TIC M3M14 25 T1, T1-IK TC1, TC1-IK E1, 1 TIC M4.5M24 25 T2, T2-IK TC2, TC2-IK E2, 2 TIC M14M36 32 T3, T3-IK, TC3, TC3-IK E3, Note: When using Roll Form Taps the chuck s tapping capacity must be reuce by 25 %. The quick-change aapters have to be orere separately, see pages Shanks Pages 3842 Cover Pages 5254 Page 57 Quick-Change Aapters Selector Chart Spee Chart Programming 35

36 TIC Tapping chucks with HSK IN 69893A, internal coolant system IC S L2 L1 Tapping chuck with internal coolant system an self-fee tension an compression an quick-change spinle, where the tap can be change in secons. Features an Avantages self-fee tension an compression har start an front release right han an left han tapping internal coolant system (max. 50 bar) short construction Z T H Shanks imensions Moel mm mm L1 mm L2 mm TIC1-HSK50A TIC1-HSK63A TIC1-HSK80A TIC1-HSK100A TIC2-HSK50A TIC2-HSK63A TIC2-HSK80A TIC2-HSK100A Moel Capacity (steel) Shank S Tap aapters Self-fee mm Front release HSK-A Tension T Compression H Z mm TIC1-HSK50A M3M14 50 T1, T1-IK TIC1-HSK63A TC1, TC1-IK TIC1-HSK80A E1, 1 TIC1-HSK100A TIC2-HSK50A M4.5M24 50 T2, T2-IK TIC2-HSK63A TC2, TC2-IK TIC2-HSK80A E2, 2 TIC2-HSK100A Note: When using Roll Form Taps the chuck s tapping capacity must be reuce by 25 %. The quick-change aapters have to be orere separately, see pages Tapping chucks with other shank versions an internal coolant system like Steep taper shank IN 69871A/ or B Steep taper shank MAS-BT (JIS B6339) Steep taper shank IN 2080 ABS-coupling (System Komet) Straight shank IN (VI 3425) on request Pages 3842 Cover Pages 5254 Page Quick-Change Aapters Selector Chart Spee Chart Programming

37 TIM. NC Tapping chucks with moular straight shank IN 1835B+E for minimum quantity lubrication S Tapping chuck with minimum quantity lubrication, self-fee tension an compression an quick-change spinle, where the tap can be change in secons. Z T H=0.35 L1 L2 Features an Avantages self-fee tension an compression har start an front release right han an left han tapping minimum quantity lubrication (MQL) up to max. 10 bar short construction Note: When using Roll Form Taps the chuck s tapping capacity must be reuce by 25 %. The quick-change aapters have to be orere separately, see pages Moel Capacity (steel) Straight shank S mm Tap aapters TIM M7M14 25 T1 TIM M7M24 25 T2 Tapping chucks with moular straight shank IN 1835B+E with self-release, quick-change version Tapping chuck with quick change spinle an self-release. SHANK (B) Features an Avantages length compensation har start self-release for precise epth control quick-change version for fast tap changes without any keys Shanks L (A) (C) How to orer Please select the tapping chuck (A) an SK or BT shank (B), to fit your machine. For Quick Change moels orer ER collet aapter (C) shown below or stanar aapters shown in accessories section. Please orer accessories like collets an sealing gaskets separately as they are not inclue. (A) NC Tapping Chuck with Straight Shank, Quick-Change Aapter Moel Capacity (steel) Shank Aapter Size Weight kg L Self-fee self-release Compression NC M2M6 20 mm Nr #41/4 3/4 NC M3M12 25 mm Nr #89/16 1 NC2S 34022S M5M22 25 mm Nr S 5/16 7/8 1 NC150 with self-release an internal coolant system SHANK (B) COOLANT (A) NC150 Tapping Chuck with Straight Shank, ER50 Steel Collet, Internal Coolant System Moel Capacity (steel) Shank Collets Weight kg L Self-fee self-release NC M22M48 40 mm ER (A) L Page 46 Page 38 Pages 44, 45 Cover Page 57 (B) (C) Interchangeable Steep Tapers Quick-Change Aapters Steel collets Selector Chart Programming 37

38 T Quick-change aapters, positive rive For quick change tap chucks TA, TIC, TIM an NC, with or without internal coolant system. Features an Avantages equally appropriate for taps with internal coolant no pre-selective torque rive suitable for right an left han tapping IC Moel Tap size Seize imensions mm L1 mm mm L2 mm T0 M1M T1 M3M T2 M4,5M T3 M14M T4 M22M Accessories L3 L1 Ø L2 Prouct range Aapters Tap Shank Ø Square mm T0 T1 T2 T3 T4 M T M T M T M T M T M T M T M T T M T T M T M T T M T T M T T M T T M5 5 4 T T M T T T M T T M T T T M T T T M T T M T T T M T T T M T * T T M T * T T M T * T T M T T M T T M T T M T T T M T T T M T * T T M T * T T M T T M T T M T T M T T M T T M T T T M T T T M T T T M T * T T M T * T T M T * T T M T T M T T M T T M T * T M T * T M T * T M T * T M T * T Note: Version with (*) only suitable for light processing. 38

39 TC Quick-change aapters, with pre-selective torque rive For quick change tap chucks TA, TIC, TIM an NC, with or without internal coolant system. A pre-selective torque rive protects the tap from breakage. Features an Avantages equally appropriate for taps with internal coolant with pre-selective torque rive suitable for right an left han tapping IC Moel Tap size Seize imensions mm L1 mm mm L2 mm TC0 M1M TC1 M3M TC2 M4.5M TC3 M14M TC4 M22M Ø L2 L3 L1 Prouct range Aapters with torque control Tap Shank Ø Square mm TC0 TC1 TC2 TC3 TC4 M TC M TC M TC M TC M TC M TC M TC M TC TC M TC TC M TC M TC TC M TC TC M TC TC M TC TC M5 5 4 TC TC M TC TC TC M TC TC M TC TC TC M TC TC TC M TC TC M TC TC TC M TC TC TC M TC * TC TC M TC * TC TC M TC TC TC M TC TC M TC TC M TC TC M TC TC TC M TC TC TC M TC * TC TC M TC * TC TC M TC TC M TC TC M TC TC M TC TC M TC TC M TC TC TC M TC TC TC M TC TC TC M TC * TC TC M TC * TC TC M TC * TC TC M TC TC M TC TC M TC TC M TC TC M TC TC M TC * TC M TC TC M TC TC Note: Version with (*) only suitable for light processing. Accessories Page 41 Torque Ajusting Values 39

40 T-IK Quick-change aapters, with internal coolant system or supply along the tool shank For quick change tap chucks TIC with internal coolant system. Features an Avantages coolant supply also along the tool shank no pre-selective torque rive suitable for right an left han tapping IC Moel Tap size Seize imensions mm L1 mm mm L2 mm T1-IK M3M T2-IK M4.5M T3-IK M14M T4-IK M22M Accessories Ø L2 L3 L1 Prouct range IC-Aapters Tap Shank Ø Square mm Stanar T1-IK T2-IK T3-IK T4-IK M IN371 T1-IK M3,5 4 3 IN371 T1-IK M IN371 T1-IK M IN376 T1-IK M IN371 T1-IK T2-IK M IN376 T1-IK M IN371 T1-IK T2-IK M IN376 T1-IK T2-IK M IN371 T1-IK T2-IK M IN376 T1-IK T2-IK M IN371 T1-IK T2-IK M IN376 T1-IK T2-IK M IN376 T1-IK T2-IK T3-IK M IN376 T2-IK T3-IK M IN376 T2-IK T3-IK M IN376 T2-IK T3-IK M IN376 T2-IK T3-IK T4-IK M IN376 T2-IK T3-IK T4-IK M IN376 T3-IK T4-IK M IN376 T3-IK T4-IK M IN376 T3-IK T4-IK M IN376 T3-IK T4-IK M IN376 T4-IK M IN376 T4-IK M IN376 T4-IK M IN376 T4-IK

41 TC-IK Quick-change aapters, with internal coolant supply an pre-selective torque rive Moel Tap size Seize imensions mm L1 mm mm L2 mm TC1-IK M3.5M TC2-IK M4.5M TC3-IK M14M TC4-IK M22M IC Ø L2 L3 L1 Prouct Range IC-Aapters with Torque Control Tap Shank Ø Square mm Stanar TC1-IK TC2-IK TC3-IK TC4-IK M IN371 TC1-IK M IN371 TC1-IK M IN376 TC1-IK M IN371 TC1-IK TC2-IK M IN376 TC1-IK M IN371 TC1-IK TC2-IK M IN376 TC1-IK TC2-IK M IN371 TC1-IK TC2-IK M IN376 TC1-IK TC2-IK M IN371 TC1-IK TC2-IK M IN376 TC1-IK TC2-IK M IN376 TC1-IK TC2-IK TC3-IK M IN376 TC2-IK TC3-IK M IN376 TC2-IK TC3-IK M IN376 TC2-IK TC3-IK M IN376 TC2-IK TC3-IK TC4-IK M IN376 TC2-IK TC3-IK TC4-IK M IN376 TC3-IK TC4-IK M IN376 TC3-IK TC4-IK M IN376 TC3-IK TC4-IK M IN376 TC3-IK TC4-IK M IN376 TC4-IK M IN376 TC4-IK M IN376 TC4-IK M IN376 TC4-IK Torque values for quick-change aapters TC an TC-IK Spanner Single fixture Torque wrench Square pin Aapter TC or TC-IK Vice Torque Threa type Nm M G (Whw.) NPT UNC 0.3 M2 Nr M M3 Nr Nr. 4 / Nr Nr M4 Nr M M5 Nr M6 Nr M7 G 1/8" 1/4" 10.0 M8 5/16" 18.0 M10 G 1/4" 1/16" 3/4" 28.0 M12 G 3/8" 1/8" 1/16" /2" 45.0 M14 9/16" 50.0 M16 G 1/2" / G 5/8" 1/4" 5/8" /4" 80.0 M18 G 3/4" / G 7/8" 90.0 M20 3/8" M22 7/8" M24 G 1" 1" M27 G 1 1/8" / G 1 1/4" 1/2" M30 G 1 3/8" / G 1 1/2" 3/4" 1 1/8" M33 G 1 3/4" / G 2 1 1/4" M36 G 2 1/4" M39 G 2 1/2" / G 2 3/4" 1" 1 3/4" / 1 1/2" M42 G 3 / G 3 1/4" 1 1/4" M45 G 3 1/2" / G 3 3/4" M48 G 4" 1 1/2" Accessories Note: Torque ajusting tools on request. Page 48 Torque Wrench 41

42 TF. E. Quick-change collet chuck aapters for multi-range collets (RF) Tap holers with various or ajustable back jaws for quick change tap chucks TA an NC. Only 2 multi-range collets (RF) per type necessary to cover capacity. elivery Accessories inclue wrench an necessary rive aapters for the specifie capacity. Please see page 43 for multi-range collets, which have to be orere separately. Moel Tap size Collets Rubber Flex TF M1.4M7 J116 J117 TF M3M12 J421 J422 TF M5M18 J443 J440 TF M10M30 J461 J462 imensions A mm B mm C mm mm Quick-change aapters for steel collets IC Tap holer for steel collets ER an ER-GB for quick change tap chucks TA, TIC, TIM an NC, with or without internal coolant system. elivery Stanar accessories inclue sealing nut, wrench is not inclue. 5 L2 Moel Tap size Collets imensions ER mm mm L2 mm E M2M8 ER E M4M12 ER E M4M20 ER Accessories Quick-change ie holers Ø IC For tap chucks TA, TIC an NC, for roun ies acc. to IN 223. Ø Lmax L2 Moel ie size Ø Capacity (steel) imensions mm mm L2 mm L max mm SE 16 x 5 M1M SE 20 x 5 M3M SE 20 x 7 M4.5M SE 25 x 9 M7M SE 30 x 11 M10M SE 38 x 10 M12x1M15x1, SE 38 x 14 M12M SE 20 x 5 M3M SE 20 x 7 M4.5M SE 25 x 9 M7M SE 30 x 11 M10M SE 38 x 10 M12x1M15x1, SE 38 x 14 M12M SE 45 x 14 M16x1M20x SE 45 x 18 M16M SE 30 x 11 M10M SE 38 x 10 M12x1M15x1, SE 38 x 14 M12M SE 45 x 14 M16x1M20x SE 45 x 18 M16M SE 55 x 15 M22x1M26x SE 55 x 22 M22M SE 65 x 18 M27x1M36x SE 65 x 25 M27M

43 Accessories Clamping nuts acc. to IN 6499 Note: max. Nm shows the maximum allowe tightening torque for each respective nut size. Type A mm B mm max. Nm ER ER ER Note: max. Nm shows the maximum allowe tightening torque for each respective nut size. Type A mm B mm max. Nm ER ER ER ER Clamping nuts to IN 6499 for internal coolant system Sealing gaskets Note: max. Nm shows the maximum allowe tightening torque for each respective nut size. Type A mm B mm max. Nm ER ER Type A mm B mm max. Nm ER ER ER ER Cooling gaskets Note: max. Nm shows the maximum allowe tightening torque for each respective nut size. For clamping nuts to IN 6499 for internal coolant system. Capacity 0.5 mm/gasket. Moel Capacity mm S/ER S/ER S/ER S/ER S/ER S/ER Orer example sealing gaskets: The orer coe can easily be create accoring to the following example: Sealing gasket for nut S/ER16 Ø 8.0 mm translates into part no Orering key Article group Moel Capacity mm For better cooling an lubrication, longer tool life an better chip transport. on request Accessories Rubber Flex multi-range collets XB collets Rubber Flex collets for TAPMATIC tapping attachments an chucks. Moel Capacity Type mm J Extra J Stanar J Stanar J Extra J Stanar J Stanar J Extra Moel Capacity Type mm J Stanar J Extra J Stanar J Extra J Extra J Stanar J Stanar For TAPMATIC miniature tapping attachment moel 100XB. Moel Capacity Type mm 117XB IN XB ISO 117XB XB Moel Capacity Type mm 117XB IN XB IN XB ISO 117XB

44 ER-GB Steel collets ER-GB with inner square Collets to IN 6499B with inner square for positive rive of tap square. Especially suitable for synchronize tapping. Interchangeable with ER-collets. Accessories ER11GB A = 11.5 mm B = 17.0 mm Shank mm Square mm GB GB GB GB GB GB ER16GB A = 17.0 mm B = 27.5 mm Shank mm Square mm GB /3.2 GB GB GB GB GB GB GB GB GB GB GB /6.3 GB GB /7.1 ER20GB A = 21.0 mm B = 31.5 mm Shank mm Square mm GB /3.2 GB GB GB GB GB GB GB GB GB GB GB /6.3 GB GB /7.1 GB GB GB GB GB ER25GB A = 26.0 mm B = 34.0 mm Shank mm Square mm GB /3.2 GB GB GB GB GB GB GB GB GB GB GB /6.3 GB GB /7.1 GB GB GB GB GB GB GB /11.2 GB GB ER32GB A = 33.0 mm B = 40.0 mm Shank mm Square mm GB /3.2 GB GB GB GB GB GB GB GB GB GB GB /6.3 GB GB /7.1 GB GB GB GB GB GB GB /11.2 GB GB GB GB /14.5 GB ER40GB A = 41.0 mm B = 46.0 mm Shank mm Square mm GB GB GB GB GB GB GB /6.3 GB GB /7.1 GB GB GB GB GB GB GB /11.2 GB GB GB GB /14.5 GB GB ER50GB A = 60.0 mm B = 52.0 mm Shank mm Square mm GB GB GB GB

45 ER Steel collets ER acc. to IN 6499B B Ø A ER8 A = 8.5 mm B = 12.0 mm Capacity Shank Ø mm ER11 A = 11.5 mm B = 17.0 mm Capacity Shank Ø mm ER16 A = 17.0 mm B = 27.5 mm Capacity Shank Ø mm ER20 A = 21.0 mm B = 31.5 mm Capacity Shank Ø mm ER25 A = 26.0 mm B = 34.0 mm Capacity Shank Ø mm ER32 A = 33.0 mm B = 40.0 mm Capacity Shank Ø mm ER40 A = 41.0 mm B = 46.0 mm Capacity Shank Ø mm ER50 A = 60.0 mm B = 52.0 mm Capacity Shank Ø mm Accessories 45

46 NC Shanks. Coolant Tubes NC shanks IN 69871A/ Shank Bore imensions mm Weight kg mm A g S-241 SK M S-242 SK M S-244 SK M S-251 SK M S-252 SK M S-254 SK M NC shanks MAS-BT Arbors Bore imensions mm Weight kg mm A g S-331 BT M S-341 BT M S-342 BT M S-344 BT M S-351 BT M S-352 BT M S-354 BT M NC shanks IN 2080 Shank Bore imensions mm Weight kg mm A g S-141 SK M S-142 SK M S-151 SK M S-152 SK M Accessories Moular NC shanks HSK-A A Shank HSK-A Bore imensions mm Weight kg mm A S-451 HSK S-461 HSK S-463 HSK63A S-481 HSK S-411 HSK S-413 HSK100A Coolant tubes for shanks IN 69893A For HSK-A imensions mm Ø Ø 1 G M16x M18x M20x M24x1.5 46

47 Morse Taper Arbors Morse taper arbors to IN 238 Morse taper IN taper Length mm L1 L MK1 B MK1 B MK2 B MK2 B Mk2 B MK3 B MK3 B MK3 B MK4 B MK4 B Morse taper arbors to JACOBS taper Morse taper JACOBS taper Length mm L1 L MK MK MK MK Mk MK MK MK MK MK MK MK MK MK MK MK Morse taper arbors with threae mount Morse taper Threae Length mm L1 L MK1 3/ MK2 3/ MK3 3/ MK1 1/ MK2 1/ MK3 1/ MK2 5/ MK3 5/ MK2 7/ MK3 7/ MK4 7/ MK3 1 1/ MK4 1 1/ Accessories Straight shank arbors to JACOBS taper Straight shank JACOBS taper Length mm Ø mm L1 L

48 Torque Wrenches. Torque Bars Torque wrenches Moel Torco-Fix Torco-Fix l Torco-Fix ll Torco-Fix lll TS 0.9 Clip-on wrenches for torque wrench Moel Power-Collet Torque wrench incl. case, no inserts ER 16 insert ER 25 insert ER 32 insert Moel A-E A-E A-E A-E A-E A-E 50 Moel A-E 11 P A-E 16 P A-E 20 P Accessories Mounting evice For easy an controlle tightening of nuts for collet chuck holers, without amaging the tool. Length mm 28SFT SFT Quill Mount Torque Bars clamp aroun quill of machine Moel A-E 8 M A-E 11 M A-E 16 M A-E 20 M A-E 25 M iameter Capacity V-Typ mm M16 1 1/2 2 3/8 1/ mm M18 2 3/8 4 1/2 3/4 Always mount a torque bar to hol the tapping attachment s stop arm from rotating. The stop arm shoul not be installe permanently, not uner any circumstances be hel by han or fastene with wire. The torque bar must be mounte securely to the table or quill of your machine. The torque bar installation must be stronger than the largest tap in the capacity range of your tapping attachment. Please orer Tapmatic torque bars shown. Table Mount Torque Bars mount to the «T» slots of table Tap capacity Tap capacity M33 1 3/ M18 3/4 48

49 Cutting Flui TAPMATIC cutting flui have two effects: they cool an lubricate simultaneously. This means a cleaner cut an an increase in tap life. FERROFLUI cutting flui FERROFLUI is an inispensable ai when tapping tough/har steels, chromium-nickel steels an stainless steels. FERROFLUI has outstaning anti-wel characteristics, helps to improve threa tolerances an surface finish, prevents galling an seizure. VOC free. Application For all steel, stainless steel, inconell, titan etc., not suitable for aluminium. Prouct name Size l Container FERROFLUI 0.5 Can with spout Can Can rum ALUFLUI cutting flui ALUFLUI contains ifferent high-pressure lubricants as well as special corrosion protectors, which penetrate the metal surface, the moisture a protective film. VOC free. Application Only for aluminium, copper, brass, nickel silver an others. Prouct name Size l Container ALUFLUI 0.5 Can with spout Can Can rum Cutting Fluis MINIFLUI cutting flui A MINIMUM QUANTITY cutting flui for unilute use in minimum lubrication systems. A micro-fine lubricating film prevents galling an seizure. VOC free. Application For all steel, stainless steel, inconell, titan etc. Also suitable for non-ferraus metal, aluminium an others. Not classifie as toxic. Prouct name Size l Container MINIFLUI 0.5 Can with spout Can Can 49

50 TapWriter ot Peen Marking tool for CNC marking TapWriter the CNC ot Peen Marking Tool For marking large areas un uneven surfaces or if inscription changes often. use on any CNC machine with rotating tools easy to install. Works with automatic tool change simple programming. The same as use with engraving eliminates extra operations, mark uring working process mark soft an har materials up to max. 55 HRC (moifie carbie stylus up to 63 HRC) mark flat, roune or uneven surfaces faster than engraving, 80 characters per minute or more long life replaceable carbie stylus Here are just a few examples: Marking time 9 secons on 1995 VMC 40 Machine. TapWriter Character heights shown from 6 mm to 2 mm, using stanar engraving software. Mark logos using stanar CA/CAM software for the tool path. Tapmatic MH Marking Heas for use with stanar type or custom stamps If your inscription oes not change frequently an your work piece is flat an the area you nee to mark is within a 40 mm iameter circle, the MH Marking Hea may be the best choice for your application. use on any CNC or conventional machine. No rotation neee very easy to program, simply avance against the work piece an rapi retract fast, it takes less than one secon to mark the part mark har or soft materials. Ajustable impact force spring absorption cushions any recoil effect on machine spinle use replaceable stanar type or custom stamps 50 on request

51 TapWriter How to Orer The TapWriter aapts to machining centers with automatic change, using a locking stop arm, similar to those use with self reversing tapping attachments. Select the installation metho you prefer as shown below. Please select the TapWriter (A), stop arm (B), an CAT, SK, or BT shank (C), to fit your machine. Please orer accessories like torque bars, reay mae stop arms an stop blocks separately. TapWriter with Stop Arm Bar an Stop Block Installation TapWriter with Stop Arm Plate an Torque Bar Installation (C) STOP BLOCK (C) SHANK CENTER ISTANCE SHANK TORQUE BAR STOP ARM (A) (B) (A) (B) L TapWriter 16 (A) TapWriter CNC ot Peen Marking Tool Moel Shank Weight kg TAPWRITER mm mm (A) TapWriter CNC ot Peen Marking Tool Moel Shank Weight kg TAPWRITER mm mm (B) Stop Arm Assembly Center L3 istance (42+L3) (B) Stop Arm Plate Assembly Please note a blank stop arm which can be moifie is inclue. Page 46 Page 55 Pages 5557 (C) Interchangeable Steep tapers Stop Block Installation Programming 51

52 Spee Chart Stanar Taps Low Carbon Steel, Meium Carbon Steel High Carbon Steel, High Strength Steel, Tool Steel High Strength Steel, Tool Steel Harene Stainless 303, 304, 316 Stainless 410, 430, 17-4 Harene Stainless 17-4 Anneale Titanium Alloys Nickel Base Alloys Aluminium Alloys Aluminium ie Cast Magnesium Brass, Bronze Copper Cast Iron A) B) Tap size A) rpm for HSS-E uncoate taps B) rpm for HSS-E coate taps M M M M M M M M M M M M M M M M M Spee Chart M M M M M M M M M M Tapping spee RPM iameter v c = m/min n = U/min = mm Calculation: v c 1000 n = Example: M8 with 25 m/min n = = 995 m/min The state number of revolutions are guie values acc. to general fee rates an can vary epening on tool manufacturer. - For optimal prouction an correct number of revolution, we suggest following the specifications of the tool manufacturer. - Furthermore, the maximum number of revolutions of the tapping attachment must be observe. 52 RT15 RT25 RTIC25 RT50 RTIC50 RTICXT50 RTXT50 RCT50 sintere gears RT50 RTIC50 RTICXT50 RTXT50 RCT50 cut gears RT85HS RTIC85HS RT85H RTIC85H RT100 RTIC100 RT150

53 Spee Chart High Spee/Top Spee Taps Low Carbon Steel, Meium Carbon Steel High Carbon Steel, High Strength Steel, Tool Steel High Strength Steel, Tool Steel Harene Stainless 303, 304, 316 Stainless 410, 430, 17-4 Harene Stainless 17-4 Anneale Titanium Alloys Nickel Base Alloys Aluminium Alloys Aluminium ie Cast Magnesium Brass, Bronze Copper Cast Iron A) B) Tap size A) rpm for HSS-E uncoate taps B) rpm for HSS-E coate taps M M M M M M M M M M M M M M M M M M M M Spee Chart M M M M M M M Tapping spee RPM iameter v c = m/min n = U/min = mm Calculation: v c 1000 n = Example: M8 with 40 m/min n = = 1592 m/min The state number of revolutions are guie values acc. to general fee rates an can vary epening on tool manufacturer. - For optimal prouction an correct number of revolution, we suggest following the specifications of the tool manufacturer. - Furthermore, the maximum number of revolutions of the tapping attachment must be observe. RT15 RT25 RTIC25 RT50 RTIC50 RTICXT50 RTXT50 RCT50 sintere gears RT50 RTIC50 RTICXT50 RTXT50 RCT50 cut gears RT85HS RTIC85HS RT85H RTIC85H RT100 RTIC100 RT150 53

54 Spee Chart Roll From Taps Low Carbon Steel, Meium Carbon Steel High Carbon Steel, High Strength Steel, Tool Steel High Strength Steel, Tool Steel Harene Stainless 303, 304, 316 Stainless 17-4 Anneale Titanium Alloys Nickel Base Alloys Aluminium Alloys Aluminium ie Cast Copper A) B) Tap size A) rpm for HSS-E uncoate taps B) rpm for HSS-E coate taps M M M M M M M M M M M M M M M M M Spee Chart M M M M M M Tapping spee RPM iameter v c = m/min n = U/min = mm Calculation: v c 1000 n = Example: M8 with 30 m/min n = = 1194 m/min The state number of revolutions are guie values acc. to general fee rates an can vary epening on tool manufacturer. - For optimal prouction an correct number of revolution, we suggest following the specifications of the tool manufacturer. - Furthermore, the maximum number of revolutions of the tapping attachment must be observe. 54 RT15 RT25 RTIC25 RT50 RTIC50 RTICXT50 RTXT50 RCT50 sintere gears RT50 RTIC50 RTICXT50 RTXT50 RCT50 cut gears RT85HS RTIC85HS RT85H RTIC85H RT100 RTIC100 RT150

55 Installation of Tapping Attachments Tapmatic can supply a tapping attachment reay to fit your machining center RT an RCT tapping attachments eliminate the nee for the machine spinle to reverse by automatically reversing the taps rotation when the machine retracts. For the automatic reversal to function a stop arm is neee to prevent the housing of the tapping attachment from rotating. Our stop arm locking mechanism allows the tool to easily make automatic tool changes. Tapmatic maintains a large ata base of machining center installations Please simply let us know the machine manufacturer, moel an serial number an we may alreay have the installation information available to provie a tool reay to run on your machine. My machine alreay has a stop block If your machine alreay has an anti-rotation stop block installe, please let us know the imensions shown in the rawing below. We can prepare a tool to go with your existing stop block. My machine oes not have a stop block If your machine oes not have a stop block alreay installe, we woul be please to prepare one for you. Please simply fill in the form on the back cover or ownloa it from our homepage an forwar us the information. We will be please to submit an offer to you. Preferre Installation Alternative installation Z Gage Line to Mounting Surface G = Threa size G Center istance (commonly 55, 65, or 80) Z = iameter of Bore or With of Slot in Stop Block = epth of Bore or Slot in Stop Block E = Total Height of Stop Block F = Torque bar holer assembly Stop arm plate Stop arm plate housing assembly F E Machine Spinle Taper (SK, BT, CAT, HSK ) Shank = Machine Manufacturer an Moel = Stop arm plate housing assembly For Moel RT15, RT RT50 Installation Stanar stop blocks are available if you woul like to esign your own installation. These blank stop blocks can be moifie to fit the bolt pattern of your machine. Stop arm plate istance spinle centre mm Torque bar holer assemblies For the use with straight stop arm. Torque bar installation must be stronger than the largest tap Stanar Block Stanar Block Bolt size max. Length mm 69383A M A M A M A M

56 Programming Moel RT an RT-IC For efficient Tapping an prouction on CNC Machining Centre we recommen the writing of a subroutine with high spee retract. As an alternative a G85 boring cycle can be use. IMPORTANT NOTE at no time shoul the G coe for Exact Stop or Ramp be use with TAPMATIC self-reversing Tapping Attachments. They will cause the tapping cycle time to be significantly slower. We will glaly help with any programming computation. Example (Fanuc programming) Tapping attachment RT25 Tap size M5 x 0.8 Spee 2000 RPM Fee at 100% 1600 mm/min 1.) Rapi Traverse to clearance plane above the hole location. 2.) Rapi own to 1mm minimum above component. 3.) Tap pitch into component to programme epth. 4.) Retract Tapping hea at 1300mm/min, specifie istance for specific tapping hea to reverse tap rotation. 5.) Tap fee out of to clearance plane. Subroutine: Rapi traverse to 1 mm above component Move in to 8 mm epth (Please note: Actual epth slightly eeper than programme epth) Retraction of 6 mm at mm/min for changeover (at fastest retraction spee up to mm/min) Move out at fee spee to 6 mm above component surface Note: The only time uring the cycle spent in the fee rate is the 1mm approach height plus threa epth in an out. All other moves are at maximum spee. Main programme: T01 M06 Tool change tool #1 G00 G90 X25.0 Y25.0 chose work piece zero-point, move towar X/Y-coorinates S2000 M03 spee RPM, clockwise rotation of spinle G43 H1 Z25.0 M08 rapi fee to Z25, tool offset 1, coolant on M98 P0004 retrieve subroutine O0004 G00 Y50.0 rapi fee to next position Y50 M98 P0004 retrieve subroutine O0004 Clearance Plane Clearance Plane CP CP 1 mm MIN. Fast Retract istance Moving in Rapi Moving in Tap Pitch Fee Moving at 13'000 mm/min Reversing tapping attachments require a retract movement of the machine spinle in orer for the attachment to change from forwar to return movement. Subroutine: O0004 G90 G64 M49 G00 Z1.0 G01 Z-8.0 F1600 G01 Z-2.0 F13000 G01 Z6.0 F1600 M48 M99 programme number of subroutine absolute movement exact machining moe off fee overrie cancel off rapi to Z1 fee to Z-8 with fee mm/min fee to Z-2 with fee mm/min for changeover fee to Z6 with fee mm/min fee overrie cancel on subroutine en Programming Clearance Plane an Fast Retract istance RT15 CP = = 250 in or 6 mm RT25 CP = = 250 in or 6 mm RT50 CP = = 400 in or 10 mm RT85/100 CP = 590 in or 15 mm = 400 in or 10 mm RCT50 CP = = 6 mm I50 CP = = 250 in or 6 mm Please note that the istance shown is the minimum clearance plane an maximum fast retract istance allowe. The programming example shown here uses G- an M-coes that comply with a Fanuc control. Your machine may use ifferent coes. Please be sure to review the actual G an M coes use with your machine an make changes when necessary. 56

57 Programming Moels SFT an SX Rapi traverse to clearance plane as recommene by respective machine manufacturer. Cycle Rigi Tapping. Moels TA, TIC, TIM an SM Tapping cycle (G84). Rapi traverse to clearance plane as recommene by respective machine manufacturers. Spinle fee (Z) apprx. 95 % of theoretical pitch selecte (TIM 100 %). Moels SP Utilize boring cycle (G85). Rapi traverse to clearance plane safety height, (epening on threa size to be tappe 515 mm above component). Choose spinle fee (Z) % of theoretical pitch selecte to threa epth require. Fee out (reverse Z) at % up to the clearance plane safety height. Blin hole tapping or exactly efine epths. The Z fee plus the self-fee within the Tapping unit calculate Z.* Moels NC (releasing rive) Utilize Tapping cycle (G84). Rapi traverse to clearance plan as recommene by respective machine manufacturers. Spinle fee (Z) 95 % of the theoretical pitch selecte. Blin hole tapping or exactly efine epths. The Z fee plus the self-fee within the Tapping unit calculates Z. Programme a short well into the Z movement to achieve full self-fee (neutral).* Fee out to at least to the clearance plane. Moels ASR Sub routine: Fee 95 % no well, fee out at 95 % constant RPM. Rapi traverse to clearance plane safety gap (at least 10 mm from component). Fee out at least to clearance plane. For blin holes, machine fee to esire threa epth minus a short allowance (apprx. 2 mm) for the reaction time of the machine. Moels RSR Sub routine: Fee 64 % no well, fee out at 68 % constant RPM. Rapi traverse to clearance plane safety gap (at least 10 mm from component). Fee out at least to clearance plane. For blin holes, machine fee to esire threa epth minus a short allowance (apprx. 2 mm) for the reaction time of the machine. *Note: this may have to be correcte to achieve the epth require ue to any eviation in the units built in self-fee an the response time of the machine. Programming 57

58 Safety WARNING To Avoi Serious Injury An Ensure Best Results For Your Tapping Operation, Please Rea Carefully All Operator An Safety Instructions Provie For This Tapping Unit as well as all other safety instructions that are applicable, especially those for your machine tool. 1. Proper clothing: The rotating spinle of a machine tool can snag loose fitting clothing, jewelry or long hair. Never wear jewelry, long sleeves, neckties, gloves or anything else that coul become caught when operating a machine tool. Long hair must be restraine or nette to prevent it from becoming entangle in rotating spinle. 2. Proper eye protection: Always wear safety glasses with sie shiels to protect your eyes from flying particles. 3. Proper work piece fixation: Never hol the work piece or the vise it is hel in, by han. Never fasten it with wire or anything similar! The work piece must be clampe firmly to the table of the machine so that it cannot move, rotate or lift. 4. On machining centers: The same rule for stop arm an stop block installation applies «Always be sure that the installation is stronger than the largest tap.» Automatic tool changes shoul only be mae on enclose machines. 5. The tapping attachment housing, rive spinle an tap itself can become hot to the touch after operation. Use caution when removing the attachment from the machine or hanling. 6. Always be aware of the potential hazars of a machining operation: Sometimes working with your machine can seem routine. You may fin that you are no longer concentrating on the operation. A feeling of false security can lea to serious injury. Always be alert to the angers of the machines with which you work. Always keep hans, boy parts, clothing, jewelry an hair out of the areas of operation, when the machine spinle is rotating. Areas of operation inclue the immeiate point of machining an all transmission components incluing the tapping attachment. Never bring your han, other boy parts or anything attache to your boy into any of these areas until the machine spinle is completely stoppe. 7. Be aware of any other applicable safety instructions/requirements. Check List for goo tapping 1. Never use this unit before reaing all safety instructions for this attachment as well as the machine it is to be use on. 2. Is tap sharp an of correct esign for current job? 3. Is tap in proper alignment with rille hole? 4. Is machine spee correct? 5. Is machine fee correct? 6. Is machine stop set properly so tap releases in neutral rather than bottoming in work piece or fixture? 7. Is rille hole the correct size? 8. Is clearance between the rille hole an tap sufficient at start position to allow the tap to clear the hole upon retraction? 9. Is the stop arm of the tapping attachment hel rigily against rotation. Stop Arm installation must be stronger than largest tap. 10. Is the proper cutting flui or coolant being use for lubricating the tap? 11. If a bottom hole is being tappe is there sufficient chip clearance? 12. Is the correct Tapmatic moel for the specific job requirement being use? (Capacity shoul be reuce by 25 % for roll form taps.) Safety 58

59 Check List for Goo Tapping Tapping is a specialize fiel with unique challenges an tapping technology changes continuously but the basics necessary for goo tapping remain the same. For the best results, the key areas to analyze are the work piece, the tap, the machine tool, the tapping attachment or tap chuck an the set up. Work piece: Is the core hole rille to the correct size? Will it be a through or a blin hole? If tapping a blin hole, oes rille epth allow sufficient chip clearance to keep tap from bottoming out in hole? Is the work piece rigily hel against rotation an upwar movement? What is the material an harness of the work piece? Tap: o you have the correct tap esign for the application? What are the tap size an style? What material is the tap mae from? Is the tap sharp? Is the tap properly aligne with the rille hole? Is there sufficient clearance between the tap an the hole to allow for retraction? Who is the tap manufacturer? What spee oes he recommen for optimum performance of his tap in this material? Machine tool: Is machine stop set so the tap releases in neutral to prevent bottoming? Is the machine retraction correct for the tapping attachment being use? Is the torque control set to prevent tap breakage? What type of machine is in use, what is the horse power an the spinle taper? Is the work piece rigily hel to prevent isplacing ue to the high torque when tapping? Are machine fee an spee set correctly? Is the proper cutting flui being use for lubricating the tap? Never hol the stop arm by han: risk of injury. Tapping attachment: Is the correct TAPMATIC tapping attachment or tap chuck being use for the specific job requirements? Is machine retraction correct for the tapping attachment being use? Never perform any installation or programming, before reaing the operator instructions for the tapping attachment an the machine as well as the tap manufacturer s recommenations. o not lengthen the stop arm, it coul break off. o wear protective goggles. o not wear loose clothes close by rotating spinles. Installation: With a self-reversing tap chuck for manual or CNC operations, it is important to make sure that stop arm is strong enough to prevent torque bar from bening or eflecting. Machine torque bar must be stronger than largest tap. If a torque control attachment is being use, is torque set correctly so that tap will not break if accientally bottome? If epth control feature is employe, is it set correctly to cooperate with machine stop, provie total threa epth require an prevent engagement with bottom? Is clearance between the rille hole an tap sufficient at start position to allow the tap to clear the hole upon retraction? Is the stop well isengage or at least set to a minimum? Check list o not hol the work piece or vice by han, they must be clampe. 59

60 Terms & Conitions of TIC AG Terms & Conitions Information The following Terms & Conitions only apply to the business relationship between Tapmatic International Corporation Switzerlan an their representatives an ealers. The Terms & Conitions between our representatives an ealers an their business partners may iffer from the following services an conitions. General eliveries an services of Tapmatic International Corporation, hereinafter referre to as «TIC AG», are carrie out exclusively on the basis of these general stanar Terms an Conitions (T&C). They form an integral part of every contract an apply to all future business eals an agreements, without them being mentione again. Supplementary agreements, amenments or changes require for their valiity written confirmation. Offers, prices, terms of payment Offers are to be regare as not bining an subject to change. ivergent verbal consent, sub-agreement an such require for their valiity written confirmation. Quote prices an possible iscounts shall apply only to the iniviual orer in question. Orers uner /$ net will be subject to a processing charge of /$ Unless otherwise explicitly agree in writing, prices are quote ex works, exclusive of value ae tax (VAT), packing, customs uties, transportation an transport insurance. TIC AG reserves the right to increase prices as a result of higher raw material costs, increases in customs uties, exchange rates or other price efining factors. Payments have basically to be mae acc. to agree upon payments conitions (times) an in the agree upon currency. Unless otherwise explicitly agree, payment conitions are 30 ays net after the ate the invoice was issue or payment within 10 ays minus 2 % cash iscount. In the event of elaye payment, the purchaser is oblige to pay interest of 6 % on arrears. elivery time, elay in elivery The elivery time mentione in the offer complies with the current stock or prouction situation. Prior sale or changes until receipt of orer remain reserve. The elivery time mentione in orer confirmations starts after the orer has been fully resolve an is quote ex works. Is a possible failure to comply with the elivery time be attribute to an act of nature beyon control, inustrial ispute, sub-contractor or other incients which are beyon the sphere of influence of the supplier, the elivery time is prolonge aequately. The supplier will inform the purchaser of start an en of such circumstances as soon as possible. TIC AG is eligible to partial shipments an partial services within the agree upon elivery an service times, if it is reasonable to the purchaser. Right of ownership Goos elivere shall remain the property of TIC AG until complete payment of the purchase price incluing all aitional charges, interest an costs has been mae. In the event of an existing current account, ownership shall not pass until all emans as name herein are settle an the total balance from the outstaning account is repai. Warranty For a perio of one year after initial operation which has to be no later than 12 months after elivery we shall repair or replace proucts or parts thereof free of charge / uner warranty, which turne unusable ue to raw material or manufacturing fault. In orer to verify the extent of the amage an correctness of the emans, the efective proucts or parts thereof have to be returne within the mentione perio of 12 months after elivery for inspection. Shoul replacement parts be requeste immeiately, they will be invoice like stanar orers, in anticipation of the inspection results. Shoul we be liable to pay compensations, a creit note will be issue. amages an faults are exclue from our warranty, which occurre ue to outsie force, poor maintenance, capacity overloa, unsuitable lubrication, natural wear, selection of incorrect bearings, inaccurate assembly or other causes beyon our control. We o not accept liability to pay amages for irect or inirect follow-up costs which occurre to the purchaser because of raw material or manufacturing faults. Warranty claims are only vali given that the purchaser completely follows all instructions from TIC AG concerning hanling of the proucts. Safety an instruction manuals are to be carefully rea before operation. They are inclue in the elivery an can be aitionally orere at TIC AG or on the internet. Notice of efects In orer to be consiere, complaints have to be submitte no later than 14 ays after the goos have been receive. Cost estimate for repairs Every cost estimate that has to be written will be charge with /$ or SFr This amount will be fully creite against the invoice when the repair can be carrie out. Returning of goos Goos may be returne for creit only upon prior approval from Tapmatic sales staff. Goos must be in like-new saleable conition of current programme. All returns are subject to a 15 % restocking charge. Passing of risk, acceptance, transportation Unless otherwise explicitly agree in writing, elivery is mae on account an risk of purchaser. Risk of acciental loss an acciental amage of the elivery items passes over to the purchaser with the hanover to the freight carrier. This applies also, if partial shipments are mae or free of carriage charges elivery was agree. If the purchaser has not efine any transportation metho, TIC AG is free to choose a moe of transportation. Costs shall be invoice an transportation insurance is in any case to be pai by the purchaser. Place of fulfilment, jurisiction, applicable law Exclusive place of fulfilment an jurisiction is TIC AG's omicile, or the court of justice responsible for the supplier's omicile. The supplier, however, is also entitle to file a suit at the omicile of the purchaser. Swiss law is being applie. 60

61 Selector Chart Tap Chucks Moel SFT SX SM TA TIC TIM NC Capacity in Steel M2M30 M2M48 M1.4M30 M1M48 M3M36 M7M24 M1.4M48 For use on Manual machines CNC machines CNC machining centers CNC lathes Features Micro-compensation (tension an compression) Self-fee (tension an compression) (tension only) Front release Har start Self release For right an left han tapping Internal coolant system 10 bar Minimal Quantity Lubrication 50 bar 80 bar Collets an aapters Multi-range collets RF Steel collets ER/ER-GB Quick change aapters: T positive rive TC ajustable torque control T-IK positive rive, taps without internal coolant supply TC-IK torque control, taps without internal coolant supply ie holers E/TF collet holers ER collet aapter USA Shrink aapter «Shrink fit» Attachment mounts Straight shank IN 1835B+E Morse taper IN 228B HSK mount IN 69893A Steep taper IN 69871A, A/, B Steep taper MAS-BT (JIS B6339) Steep taper IN 2080 Tapmatic Capto VI 3425 mount (IN 69880) ABS-coupling (System Komet) Mount integrate Miscellaneous shank versions (short taper mount) for straight shank IN 1835B+E on page 46

62 TAPMATIC is represente throughout the worl. Please fin your local ealer on: TAPMATIC Kriessern, Switzerlan European Hea Office: TAPMATIC International Corp. TIC AG, Alte Rheinstrasse, CH-9451 Kriessern, Switzerlan Phone , Fax TAPMATIC Post Falls, USA Parent Company: TAPMATIC Corporation 802, Clearwater Loop, Post Falls, Iaho 83854, USA Phone , Fax Sol through: Tel.: Fax: IX.2010/e Subject to technical changes (without notice).