MiniCut PCD Tipped Boring Bars
|
|
- Millicent Ford
- 6 years ago
- Views:
Transcription
1
2 MiniCut PCD Tippe Boring Bars BECKER has evelope the MiniCut Tool System especially for boring from a iameter of.157" to.984" in PCD, CBN an optimizing the avantages of each material type. All boring bars are esigne in soli tungsten carbie with integrate through coolant an enable boring epths of up to 7xD. Our MiniCut tools are use on machining centers an turning machines. Contrary to most conventional tool systems we use the positive inexable s type EPHW an EPHT. The avantages of the 7 style enables higher cutting performance an precision. The tippe boring bars have the ientical shape for the full iameter range. The Wiper-Inexable s with neutral or positive rake angle an tippe Wiper Boring Bars with neutral rake angle are use for high-tech machining with high prouctivity, also increasing the flexibility of the MiniCut System consierably. PCD Tippe Carbie Boring Bars Cylinrical soli carbie boring bar with one clamping surface, tippe cutting ege an MaxiCool internal coolant fee For Aapter Sleeves, see page 3 X-GE Right or left han Right han bar shown min l g7 g7 mm f l X3.5F-GEUPR/L X3.5F-GEUPR/L0 X04F-GEUPR/L X04F-GEUPR/L X04F-GEUPR/L04 X05H-GEUPR/L X05H-GEUPR/L X05H-GEUPR/L04 X06H-GEUPR/L X06H-GEUPR/L X06H-GEUPR/L04 R/L= please choose right or left han esignation Boring bars with wiper ege also available, see full BECKER catalogue for complete selection
3 CBN Tippe Carbie Boring Bars MiniCut CBN Tippe Boring Bars Cylinrical soli carbie boring bar with one clamping surface, tippe cutting ege an MaxiCool internal coolant fee. For Aapter Sleeves, see below X-GE X3.5F-GEUPR/LT01 Aapter Sleeve for Boring Bars form X...GEUP Aapter Sleeves enable versatile use of the boring bars in all areas Coolant fee is provie through the aapter. Only for BECKER - Form X...GE Inch Right or left han D 7 H H7 mm H l Boring Bar ADAP X3.5F-GEUPR/ L ADAP X04F-GEUPR/ L ADAP X05H-GEUPR/ L ADAP X06H-GEUPR/ L Metric O.D. Aapter Sleeves also available, see full BECKER catalogue for complete selection Right han bar shown min l g7 g7 mm f l X3.5F-GEUPR/LF X3.5F-GEUPR/LT0 X04F-GEUPR/LT X04F-GEUPR/LF0 X04F-GEUPR/LT X04F-GEUPR/LF04 X04F-GEUPR/LT04 X05H-GEUPR/LT X05H-GEUPR/LF0 X05H-GEUPR/LT X05H-GEUPR/LF04 X05H-GEUPR/LT04 X06H-GEUPR/LT X06H-GEUPR/LF0 X06H-GEUPR/LT X06H-GEUPR/LF04 X06H-GEUPR/LT04 R/L= please choose right or left han esignation Boring bars with wiper ege also available, see full BECKER catalogue for complete selection SBC1 SB10 SB5 SB40 3
4 MiniCut Boring Bars with Carbie Shank Boring Bar, Soli Carbie Shank, Design E...SEUP, right or left han Boring bar with cylinrical soli carbie shank an MaxiCool internal coolant fee E -SEUPR/L min Inch Shank Bars / With Through Coolant mg 7 g7 m f L 1 g E04H-SEUPR/L E05K-SEUPR/L Lea Angle: -3 Entering Angle: 93 EPH SCR-1101 KEY-101 E06M-SEUPR/L EPH SCR-110 KEY-10 Metric Shank Bars / With Through Coolant E06F-SEUPR/L E07H-SEUPR/L E08H-SEUPR/L E10K-SEUPR/L E1M-SEUPR/L E16R-SEUPR/L R/L= please choose right or left han esignation EPH SCR-1101 KEY-101 EPH SCR-110 KEY-10 Boring Bar, Soli Carbie, Design E...SEUP, right or left han Boring bar with cylinrical soli carbie shank, two clamping surfaces an MaxiCool internal coolant fee E -SEUPR/L min Metric Shank Bars / With Through Coolant f L 1 L mg 7 g7 m E0610H-SEUPR/L E0710K-SEUPR/L E0810K-SEUPR/L R/L= please choose right or left han esignation h g Lea Angle: -3 Entering Angle: 93 EPH SCR-1101 KEY-101 4
5 BECKER PCD & CBN s EPHW Fullface with wiper ege EPHW VM. 004 EPHW VM EPHW VM EPHW with wiper ege EPHW EPHW EPHW-1.1 EPHW Fullface EPHW-1.510T-VM with wiper ege without ege prep. PBC-0 PBC-5 BH. 004 EPHW T-VM EPHW T-VM. 01 EPHW-1.511T-VM EPHW EW EPHW-1.0T-EW with wiper ege without ege prep. PBC-0 PBC EPHW-1.0.5T-EW EPHW-1.1T-EW EPHW-1.T-EW 5
6 MiniCut Boring Bars / BECKER PCD & CBN s Boring Bar, Soli Carbie Shank, Design C...SWUC, right or left han Boring bar with cylinrical soli carbie shank -SWUCR/L min Inch Shank Bars / Non Coolant mg 7 g7 m f L 1 g C03A-SWUCR/L C04A-SWUCR/L Inch Shank Bars / With Through Coolant Lea Angle: -3 Entering Angle: 93 WCGW SCR-1101 KEY-101 E04A-SWUCR/L WCGW SCR-1101 KEY-101 R/L= please choose right or left han esignation WCGW Fullface WCGW VM WCGW-1.11-VM. 106 WCGW Fullface without ege prep. PBC-0 PBC-5 WCGW T-VM WCGW-1.11T-VM
7 MiniCut Boring Bars / BECKER PCD & CBN s Boring Bar, Soli Carbie Shank, Design C_-SCLC, right or left han C_-SCLCR/L Min. Bore A D L L² F C06M-SCLCR/L C08M-SCLCR/L C10R-SCLCR/L C1S-SCLCR/L R/L= please choose right or left han esignation Lea Angle: - Entering Angle: 9 CC -1.5_ C-145 C-5507 CC -3.5_ C-1440 C-5515 These bars are also available with coolant through CCMW Neutral CCMW with wiper ege DC s l l P ¹ M DC l¹ CCMW CCMW CCMW CCMW CCMW CCMW 80 r l¹ l EW ¹ 7 S CCMW T-EW with wiper ege without ege prep. CCMW-1.51T-EW CCMW-1.5T-EW CCMW T-EW. 134 CCMW-3.51T-EW CCMW-3.5T-EW CCMW-3.53T-EW PBC-0 PBC-5 7
8 MiniCut Boring Bars / BECKER PCD & CBN s C_-SCLPR/L Soli Carbie Shank Min. Bore A D L L² F C06M-SCLPR/L C08R-SCLPR/L C10S-SCLPR/L Lea Angle: - Entering Angle: 9 CP -1.5_ C-145 C-5507 C1S-SCLPR/L CP -3.5_ C-1440 C-5515 R/L= please choose right or left han esignation These bars are also available with coolant through CPMW 80 r l¹ l Neutral ¹ 11 S CPMW with wiper ege DC s l l P ¹ M DC l¹. 134 CPMW CPMW CPMW CPMW CPMW EW CPMW T-EW with wiper ege without ege prep. without ege prep. CPMW-1.51T-EW CPMW-1.5T-EW CPMW T-EW. 134 CPMW-3.51T-EW CPMW-3.5T-EW PBC-0 PBC-5 Available from: Specifications are subject to change without notice. No responsibility for errors an/or printing errors will be accepte.
Omslag. Main Catalogue EN
Omslag Main Catalogue EN We reserve the right to moify any specification an/or item shown in the present catalogue without notice. Information, photos, rawings an technical ata specifie in the publication
More informationS.C. Rulmenti S.A. Barlad Romania Republicii Street No
RAIAL BEARINGS (EXCEPTING TAPERE ROLLER BEARINGS) Tolerance class P eviations in µm Table 1 mp V mp K ia,,9,1 2,3, all normal moifie over up to high low max. max. max. max. max. high low low max.. 1) 2.
More informationQuick-change adapters, positive drive inch sizes
P Quick-change aapters, positive rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable
More informationTension / Compression tap chucks for tapping cycles that are not synchronized
Tension / Compression tap chucks for tapping cycles that are not synchronize For tapping applications on CNC machines where the revolutions per minute an fee rate are not synchronize to the tap pitch,
More informationBuilt for Speed. Pinzbohr High Precision Boring Tools. Pinzbohr Modular Boring System. BohrSTAR Boring Kits. Rough and Finish Boring Heads
Pinzbohr High Precision Boring Tools BohrSTAR Boring Kits Rough an Finish Boring Heas Boring Hea Toolholers Carbie an HSS Boring Bars Built for Spee. BohrSTAR High Precision Kits Range 0.314" up to 8.27"(8mm
More informationHigh performance Carbide Boring Bars
High Performance Carbide Bars High performance Carbide Bars Available in Inch and Metric Shank Size Inch 0.156 to 1.250, Metric 4mm to 32mm Thru Integral Carbide System Shank Size 0.156 to 1.250 & (4mm
More informationMETAL DRILL BITS STRONGER THAN STEEL HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
STRONGER THAN STEEL RILL 307 HSS-E IN 338 cobalt 76 79 311 HSS TIN IN 338 steel rill bit 80 81 302 HSS IN 338, groun, split point 82 85 300 HSS IN 338, stanar 86 90 300 HSS IN 338, stanar, shank reuce
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More informationPinzBOHR High Precision Boring Tools
PinzBOHR High Precision Boring Tools What to expect from our boring tools. Our European mae boring tools have been proven worl wie to be among the best you can buy. Machinists love our boring tools because
More informationMetal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit
HSS-E IN 338 cobalt 72-75 HSS IN 338 groun 76-79 HSS IN 338 stanar 80-84 HSS IN 338 stanar, shank reuce 85 HSS IN 340 86 HSS IN 1869 87 HSS hollow section rill bit / facae rill bit 88 HSS IN 345 89-90
More informationManual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
More informationTriple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
More informationTapping attachments Tap chucks Cutting fluids
Tapping attachments Tap chucks Cutting fluis Quality, reliability an goo service are what TAPMATIC stans for Since its establishment in 1952, Tapmatic has manufacture tapping attachments of the highest
More informationSTEADYLINE FOR TURNING & MILLING REDUCE VIBRATIONS & INCREASE PRODUCTIVITY
STEADYLINE FOR TURNING & MILLING REDUCE VIBRATIONS & INCREASE PRODUCTIVITY OVERCOME TOOL OVERHANG CHALLENGES When using long overhang tools to machine difficult-to-access areas, such as deep cavities or
More informationISO 9001:2008 LOCKING ASSEMBLIES SHRINK DISCS KEYLESS RIGID COUPLINGS
OCKING ASSEMBIES SHRINK DISCS KEYESS RIGID COUPINGS Introuction ISO 9001:2008 CIMAX Metal Proucts Company & MAV S.p.A. A Unique Partnership In June 2011, CIMAX entere an exclusive agreement with MAV S.p.A.
More informationTungsten Carbide Burrs
Tungsten Carbie Burrs Material Groups,, Types of Cut PFERD tungsten carbie burrs are esigne for machining materials of virtually any strength. Their superior performance reflects an optimum combination
More informationOil Seal Catalogue. Ashley Power Ltd Ashley Road Parkstone Poole Dorset, BH14 0AQ. P1
Ashley Power Ltd. 580-586 Ashley Road Parkstone Poole Dorset, BH14 0AQ Oil Seal Catalogue Tel: +44 (0) 1202 746031 Fax: +44 (0) 1202 741108 Email: sales@ashleypower.co.uk P1 Oil Seals P2 Oil Seals Contents
More informationKUNSTSTOFF-METALL-FORMTEILE CROSSED-ROLLER-SLIM-SPLIT-BEARING. Crossed roller bearing PSX-08. Crossed roller bearing PSX-08 83
CROSSE-ROLLER-SLIM-SPLIT-BEARING Crosse roller bearing PSX-08 Crosse roller bearing PSX-08 83 CROSSE-ROLLER-SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE escription of shape Crosse roller bearings are
More informationEdge Preparation. Edge Preparation. Centre Drills...5. Spot Drills (90 & 120 ) Flute Countersinks...8. Edge Preparation
Centre rills...5 Spot rills (90 & 120 )...6 3 Flute Countersinks...8 Carbide Chamfer Countersink...8 Hole Countersinks...9 Carbide rill Mill...9 Single Flute Countersinks...10 Corner Rounding Cutters...11
More informationOn Aluminum. we have an edge! Aluminum. 3-Flute Series for. Get maximum return on performance with Dura-Mill s FEATURES
On Aluminum we have an ege! Get maximum return on performance with Dura-Mill s 3-Flute Series for Aluminum U.S. Patent 6,899,494 FEATURES Proven an patente WhisperKut Design ensures stability an chatterfree
More informationNew Super Metric Ball Bushing * Bearings Technical Bulletin
ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive
More information10/97 N Our policy is one of continued research and development. We therefore reserve the right
ISO Cylinders Magnetic Piston Double Acting Ø 10 to 25 mm Magnetic piston as standard Conforming to ISO 6432 Corrosion resistance Buffer and adjustable cushioned models Supplied complete with nose mounting
More informationSeries QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting
CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,
More informationRexnord Tollok Locking Assemblies
Tollok Catalog ownloa the most up-to-ate version at www.rexnor.com/ocumentation Rexnor Tollok Locking Assemblies Why Choose Rexnor Tollok Locking Assemblies? Why Choose Rexnor? When it comes to proviing
More informationVolute Centrifugal Pumps PN 16 / PN 25 for Heat Transfer Media Thermal Oil up to 350 C Hot Water up to 204 C. Series NTWH/CTWH process model
Volute Centrifugal s PN 16 / PN 25 for Heat Transfer Meia Thermal Oil up to 350 C Hot Water up to 20 C Series NTWH/CTWH process moel Series NTWH/CTWH Series NBWH/CBWH block moel Series NIWH/CIWH in-line
More informationShyam Enterprises 5 HEAT EXCHANGERS
Shyam Enterprises HEAT EXCHANGERS 33 Heat Exchangers Introuction The overall heat transfer coefficient of borosilicate glass equipment compare favourably with many alternative process plant construction
More informationSplit pillow blocks
Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with
More information1. G.T.A. Photo Electric Cells
1. G.T.A. Photo Electric Cells PHOTO ELECTRIC CELLS AND BASES AMP RATING FIXING METHOD TERMINALS QUANTITY LC-105 10 THROUGH HOLE IN FITTING WIRE TAILS 1 $33.00 LC-10D 10 TWIST INTO LC-10R BASE 3 PIN PLUG
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationBU10P with through coolant supply
GROOVING and BORING TOOLOLER BU with through coolant supply epth of groove up to Width of groove up to.354.118.118 Material of shank: Carbide - Giving a good vibration resistance for use with Insert Part
More informationSingle- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 100 and 125 mm
> Series 90 stainless steel cylinders CATALOGUE > Release 8.8 Series 90 stainless steel cylinders Single- and double-acting, cushioned, magnetic ø 32, 40, 50, 63, 80, 00 and 25 mm» In compliance with ISO
More informationTable 1d - FSA for All Returns, Females Tax Year
PR 10 Newfoundland and Labrador A0A 20,250 597,345 1,920 1,720 2,580 3,150 1,960 1,610 1,360 1,030 1,020 740 550 460 630 470 410 290 290 70 20 A0B 8,850 249,804 780 740 1,200 1,520 1,010 790 540 430 370
More information台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY
C1 C2 C3 Dial Gages (Small Bezel Dia) DG-9003S DG-9004S DG-9005S DG-9003S DG-9004S 0-3mm 0-4mm ψ40mm Aluminum Body ψ36mm Aluminum Body DG-9005S 0-5mm ψ40mm Aluminum Body Dial Gages (Normal) DG-9010A DG-9010R
More informationSection 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP/TEP
ection 3: Introuction Forewor AVX offers a broa line of soli Tantalum capacitors in a wie range of sizes, styles, an ratings to meet any esign nees. This catalog combines into one source AVX s leae tantalum
More informationFittings & Accessories for Water Pipe 2018 Price Catalogue
Fittings & Accessories for Water Pipe 2018 Price Catalogue www.plasson.co.uk 2about us Here at PASSON we continually strive to evelop an expan our range of fittings reflecting our ongoing strategy to eliver
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationE1 E81. Stock Indications and Symbols. Boring Bars
1 1 SC- Bar Series... Bar Ientification... Bar Selection Guie... 5 Multifunctional Small Tool Twin eae olers... 1 SC- ne Bottom Facing ne e n S-SCLC / A-SCLC... 1 B-SCLC / C-SCLC... 13 -SCLC... 1 S-SCLP
More informationBALL BEARINGS & STEEL SHAFTS
BA BEARINGS & STEE SHAFTS Every care has been taken to ensure the accuracy of the information containe in this catalogue, but no liability can be accepte for any errors or omissions. We reserve the right
More informationPRA/182000, PRA/182000/M
Profile barrel with concealed tie rods Pneumatic Profile Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic Piston Double Acting Ø 32 to 125 mm M/50 Switches can be mounted flush
More informationP1X Series. Compact Rodless Air Cylinders Contents
Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...
More informationPINZBOHR BORING SYSTEM. Index
Index - Rough heads - Finish heads - Micro boring heads & boring bars - A4016 micro heads & 16mmØ shank boring bars - Key to select arbors - Arbors programme - Extensions & reducers - Large diameter boring
More informationColumn Aaptor Column Section In many operations like reaction, extraction & absorption, the transparency of glass is particular avantage. For such process a range of column components are available in
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationEffective Date: June Rev. 7/20/2017- Void After: June 2018
IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the
More informationHONDA NO ENGINE DESCRIPTION FULL SET HEAD SET CYL. HEAD CHK-9827SK 061A1-PH A1-PH2-010 CHK-9845SA PR PR3-000
1 A20A ACCORD 2000 1985-ON 1955CC CA5-110 86mm 2 B16A INTEGRA CRX 1991-1595CC CHK-9827SK 061A1-PH4-000 061A1-PH2-010 CHK-9845SA 06110-PR3-000 06111-PR3-000 VHK-9827SK 061A1-PH4-000H VHK-9845SA 061A1-PR3-010H
More informationROTACTION Sockets and bits for Industrial power tools
ROACION s an bits for Inustrial power tools ROACION the professional Atlas Copco solution for safer tihten Atlas Copco offers a new eneration of covere sockets: ROACION. he trensett, avance ROACION concept
More informationGuide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
More informationE3000 Series. Electric System. ø1.18", ø0.98", ø0.79" ø1.18", ø1.0", ø0.98", ø0.897" ø1.97", ø1.18" 7 TECHNICAL DATA 8 APPLICATION EXAMPLES
NC / CNC LATHE & AUTOTION SOLUTIONS Series Electric System,~, min - (rpm) One Piece Type Outsie Diameter Moular Type Outsie Diameter,, ø.9" (ø,, mm),,, (ø,.,,. mm) ispee / / -,rpm E ø." ø.9" ø." ø.9",~,
More informationIT.TE.DI. PCD INSERTS
PCD ISO INSERTS IT.TE.DI. REFERENCE TABLE 03 04 PRODUCT RANGE TYPE D INSERTS 06 11 TYPE C INSERTS TYPE R INSERTS 14 16 TYPE E INSERTS TYPE T INSERTS 18 22 TYPE S INSERTS TYPE W INSERTS 29 32 TYPE V INSERTS
More informationPENCIL DESIGN. Hydraulic high precision toolholder Pencil version. Benefits and features
PENCIL DESIGN Benefits and features For drilling to finishing Pencil design enabling machining in deep cavities and complex components Special designs possibility High clamping force 6 Nm is with its extreme
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationToolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
More informationFlat Top Column Aaptor Column Aaptor In many operations like reaction, extraction & absorption, the transparency of glass is particular avantage. For such process a range of column components are available
More informationExpanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads
Page 1 / 5 MM GRIT 28K-45A MM GRIT 28K-75-6T10 MM GRIT 28K-60-6T10 MM GRIT 28K-45-6T10 Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads Page 2 / 5 Highlights Following market
More informationHitachi Tool Engineering Europe GmbH. No
Hitachi Tool Engineering Europe GmbH No. 324.3 Inexable illing Too AS The new AS/AHU ini has 2 kins of insert shapes an applications: JDT type insert for 90 cutting JDT Schneiplatte für 90 Bearbeitungen
More informationPVA/182000, PVA/182000/M
Smooth Line cylinders with or without integrated switches Double acting Ø 3... 100 mm Smooth and spherical profile design with concealed tie rods Special polyurethane wiper seal Body sealing conforms to
More informationBRUSHLESS MOTOR & SPINDLE E3000 SERIES Modular Type ø1.18"(ø30 mm)
BRUSHLESS MOTOR & SPINDLE SERIES Moular Type ø."(ø mm),~, min- (rpm) Maximum Output W Motor spee is isplaye accurately on the front panel. Auto or Manual Control Moes. Can be installe on Special-Purpose
More informationGrooving, Cut-Off, and Turning
Grooving, Cut-Off, and Turning Grooving Application Guide..........................................................................D2 D3 WMT Grooving, Cut-Off, and Turning................................................................D4
More informationLathe Tool Holders. Catalog Number Gage Insert H B H1 L F L1 Shim Options Right Hand Left Hand Shank. Shank Width ±.15. Height ±.10. Shank Width ±.
Lathe Tool Holders DCLNR/L - CNMG, 80 Diamond This tool is designed for turning and facing applications where cutting loads are heavy. The DWLNR/L or GWLNR/L is more economical (6 tips per insert) if insert
More informationSIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
More informationand 2013 Beyond Inserts
INNOVATIONS Innovations MASTER Master Catalogue CATALOGUE A4 CUTTING Tooling TOOLS and 2013 Beyond Inserts 2013 A4 Tooling and Beyond Inserts for All Your O.D. and I.D. Applications Primary Application
More informationTurning Tools Catalogue. Special Tools
Turning Tools Catalogue Special Tools Special Tools 2 11 15 Multi3 Cut Multi3 Cut F External radial holder 2 Multi3 Cut F External axial holder 3 Blanks for Multi3 Cut F 4 Multi3 Cut External radial holder
More informationHepcoMotion. Shaft precision steel and aluminium shaft
HepcoMotion Shaft precision steel an aluminium shaft Introucing the HepcoMotion Precision Shaft Correct Shaft selection is vital if maximum performance is to be achieve from your linear system. Hepco Precision
More informationOur policy is one of continued research and development. We therefore reserve the right
Corrosion resistant design Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Magnetic Piston Double Acting Ø 32 to 100 mm Accepted in the Food Industry Conforms to ISO 6431, VDMA 24562 and NFE
More informationFIELD CONNECTIONS MODEL YK CHILLERS (STYLE F AND G) WITH VARIABLE SPEED DRIVE
Supersedes: 160.54-PW6 (513) Form 160.54-PW6 (816) WIRING DIAGRAM CONTRACTOR ORDER NO. YORK CONTRACT NO. YORK ORDER NO. FIELD CONNECTIONS MODEL YK CHILLERS (STYLE F AND G) WITH VARIABLE SPEED DRIVE PURCHASER
More informationNickel Plated Nylon Liquid Brass Liquid Tight Strain Tight Relief Strain Fittings. Features & Benefits
Features & Benefits: Nickel Plated Nylon Liquid Brass Liquid Tight Strain Tight Relief Strain Fittings Relief Fittings Features & Benefits Liquid Tight - submersible to 300 ft. - NEM 4x & 6 (IP 68 / IP
More informationCoorinate Measuring Machine Applicable Probe Hea ZEISS HSS VAST ZEISS Probe Hea Specifications Probe Hea VAST-XT Stylus + extension maximum length () Stylus minimum tip iameter () Stylus + extension maximum
More informationE3000 / E3200 Series. Electric System. ø1.18"(ø30 mm) ø0.897"(ø22.8 mm) ø1.0", ø0.98"(ø25.4, ø25 mm) ø1.18", ø1.97"(ø30, ø50 mm)
NC / CNC LATHE & AUTOTION SOLUTIONS / E Series Electric System AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - Outsie Diameter,~, min - (rpm) Output W One Piece Type Outsie Diameter,~, min - (rpm) Output
More informationKA/8000, KA/8000/M. Cylinder Variants. Model Codes. Standard Strokes. Warning 7/97 N/UK
Stainless Steel VDMA/ISO Cylinders Non-magnetic and magnetic Piston Double Acting Ø 32 to 200 mm High corrosion and acid resistant Conforming to Standards ISO 6431, VDMA 24562 and NFE 49-003-1 Ideal for
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More informationAD-2D NEW Drilling Solid carbide 2xD
l A-2 NEW rilling oli carbie 2x irst choice in quality an performance Carbie rill with EgiAs coating Up to 2x or general purpose steels an cast iron 112 sizes P P P P K K H H H C: 0,2% C: 0,25-0,4% C:
More informationSeries 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationConveyor system XH Contents System information Chain width 103 mm Technical characteristics Features Examples of application areas
Conveyor system Contents System information...215 Chains...216 Chain accessories...217 Beams...217 Beam accessories...218 Slide rails...219 Slide rails, hardened steel...220 Drive and idler units introduction...221
More informationHigh-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
More informationRM3. Multi Functional Shoulder Milling Tool for Higher Productivity. High Quality. Excellent Productivity. Great Value for Money
Multi Functional Shoulder Milling Tool for Higher Productivity High Quality True perpendicular shouldering operation Excellent Productivity Strong thick insert and 3-face clamping for stable milling even
More informationInventory Article No. Precision mm 0.01mm 35um 386g. Precision A
DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS
More informationPISTONS & CONNECTING RODS Make
PISTONS & CONNECTING RODS Make Engine Size Model Year Bore Compression Description Piston Part Connecting Rod Number Part Number M5039 RS1223-3437-0 Replacement Pin Replacement Locks Replacement Rings
More informationNEW. ARNO Mini-System. AMS the new modular and extremely flexible. Minimum bore diameter from 2,5 mm and bore depth up to 30 mm.
NEW Introducing AMS ANO - Mini - System www.arno.de AMS ANO -Mini-System! High productivity for machining small diameter applications. Maximum reliability, high precision and guaranteed repeatability due
More informationNew Super Metric Ball Bushing * Bearings Technical Bulletin
ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive
More informationHigh Temperature Masking
Hig Temperature Masking Silicone Caps an Plugs (+300ºC) 92-96 Flexible PVC Caps an Plugs (+220ºC) 97-98 Paper Caps an Plugs (+205ºC) 99 EPM an TPR Caps an Plugs (+180ºC) 100-105 Masking Tapes, Hooks an
More informationSelection. Radiator Caps. Recovery Caps (double seal) Non Recovery Caps (single seal) Pressure Rating. Safety Lever Radiator Caps. Pressure Conversion
Radiator Caps The Tridon radiator cap range has been developed to operate within original equipment manufacturer s specifications. Photographs and technical specifications are shown for each Tridon part
More informationEDGE PCD. Indexable Inserts. Issue 11
Issue 11 EDGE PCD Indexable Inserts EDGE PCD inserts are widely used to machine practically all non-ferrous metals, ranging from soft aluminum through cemented tungsten carbide. They are also used to machine
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationISO-6432 MINIATURE CYLINDER/NON-PIVOT TYPE MINIATURE CYLINDER. Specification. Model. Tube I.D. (mm) Port size M5 0.8 G1/8.
MCMI series ISO- MINITURE CYLINDER/NON-PIVOT TYPE MINITURE CYLINDER Table for standard stroke Single acting Double acting ø,,0,7,00 Tightening torque Order example Stroke (mm) ø0,,,0,7,00,,0 ø,0 0,,0,0,0,00
More informationSingle and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm
> Series 97 stainless steel cylinders CATALOGUE > Release 8.7 Series 97 stainless steel cylinders Single and double-acting, cushioned, magnetic. ø 32, 40, 50, 63 mm»» Clean design»» Stainless steel AISI
More informationCAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG
powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders
More informationRA/28000, RA/ Pneumatic Cylinders ISO 6431, VDMA and NFE Non-magnetic and Magnetic, Single Acting 32 to 100 mm
Pneumatic Cylinders ISO 6431, VDMA 24562 and NFE 49-003-1 Non-magnetic and Magnetic, Single Acting 32 to 100 mm ugged tie rod construction Polyurethane seals ensure efficient low friction operation and
More informationLive Centers. High Speed Steel Main Line
ive enters igh Spee Steel Main ine MIN-IN: Reliable top of the range live center for N an conventional lathes, an grining machines With over-pressure security through isc springs oy an spinle moels: SM
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationNSK Ball Screws for Standard Stock
NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar stock series assures immeiate elivery. New! Patent Pening BSS Series next-generation
More informationROLLER CHAIN SPROCKETS
ROLLER CHAIN PROCKE ypes an Materials Correct engagement between roller chain an sprocket is require for smooth transmission of roller chain. Appropriate selection of number of teeth (spee ratio), center-to-center
More informationINSTRUMENT PANEL CLUSTERS
INSTRUMENT PANEL CLUSTERS NOT BUYING AT THIS TIME REVISED ##### PART # MAKE APPLICATION 6/18/2018 PRICE 56045618 CHRY IPC 40.00 56045679 CHRY IPC 40.00 56051103 CHRY IPC 40.00 56049833 AC,AD CHRY IPC 40.00
More informationKTA SPINDLE TOOLINGS
Price INR R 2013 KTA SPINDLE TOOLINGS SILVER SERIES PRECISION TOOL HOLDERS FOR CNC MACHINES HSK DIN 69893-1 FORM A Features : Special Material with Tensile NEW 2 strength inthe Core Min 950 N/mm. Case
More informationSERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC
CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414
More informationMini Mill-Thread (cont d) Mill-Thread Solid Carbide. Mill-Thread Solid Carbide for Threading and Grooving Deep Parts. Mini Chamfer Tools 34
Metric recision Toos t. CONTENTS Mi-Threa Soi Carbie rouct entification with cooant bore with interna cooant through the futes G ( ) G ( ) with interna cooant through the futes Whitworth with interna cooant
More informationyour reliable partner EAS -Compact K.490.V16.EN
ES -Compact K.490.V16.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one of the most traitional an yet most innovative
More informationGRADES COMPARISON TABLE
GRADES COMARN TABLE CEMENTED CARBIDE M M10 U10E UTi20T U2 UX30 UTi20T A30 UX30 UMN WA10B A EX45 F S 890 IC07 M40 UM40 EX45 01 HTi05T H1 H2 N HTi10 UTi20T E G10E EH20 TH03 S05F T S15F W10 GW15 GW25 G03
More information