E1 E81. Stock Indications and Symbols. Boring Bars
|
|
- Sophie Logan
- 5 years ago
- Views:
Transcription
1 1 1 SC- Bar Series... Bar Ientification... Bar Selection Guie... 5 Multifunctional Small Tool Twin eae olers... 1 SC- ne Bottom Facing ne e n S-SCLC / A-SCLC... 1 B-SCLC / C-SCLC SCLC... 1 S-SCLP / A-SCLP B-SCLP / -SCLP / C-SCLP... S-CLN / -CLN... 3 S-PCLN / B-PCLN... SC- ne ne ne ne e Profiling n ne ne ne ne ne ne olers for Aluminum Foil Machining SC- Through ne ne SC- Stop ne ne Minimum Small Stock Inications an Symbols S-PWLN... 6 S-SUC / A-SUC... 7 B-SUC / C-SUC... 8 S-SQC / A-SQC... 9 B-SQC / ne S-SZC... 3 S-QN / ne S-UN / -UN S-PUN / S-UN S-PZN / S-ZN / S-TR55C S-SVJB / B-SVJB / S-SVJC S-SVQB / B-SVQB / C-SVQB S-SVQC / A-SVQC... S-SVUB / B-SVUB / C-SVUB... 1 S-SVUC / A-SVUC... S-SVZB / B-SVZB / C-SVZB... 3 S-SVZC... MV / G... (C36 C37) S-SSKP / C-SSKP... 9 S-CSKP... 5 S-SSKC... 5 SC-Very Small ole Carbie Soli SUMIBORON Small iameter S-WLN... 5 ne S-SKN / ne S-PSKN S-SKN / S-PSYN / S-SYN... 5 S-SWUB / C-SWUB S-SWUP S-STUB / S-STUP / A-STUP B-STUP / -STUP C-STUB / C-STUP / -STUP... 6 S-CTFP S-TFN / -TFN S-PTFN / B-PTFN S-TFN... 7 SUMIIA Small ole CKB BXBR BSM SXC BNBX / BNB BNZ ABB... 8 For ouble Clamp olers Clamp Set Parts ne ne mark : Stanar stocke item mark: To be replace by a new item feature on the same page mark: To be replace by new item (Please confirm stock availability) S-CLN / -WLN / ne * mark: Semi-stanar stock (Please confirm stock availability) mark: Stock or planne stock (Please confirm stock availability) No mark: Mae-to-orer item mark: We cannot prouce 1
2 SC- Bar Series Complete Support For Operations For Turning Tooling Selection Guie Applications Bottom Facing Profiling Back Turning Insert shape Construction / Shank material 8 iamon C 55 iamon 35 iamon V 55 iamon 35 iamon V S-SCLP (BBPC) 19 S-SCLC ne 1 S-SUC S-SQC ne ne 7 9 S-SVUC S-SVUB ne ne 1 S-SVQC S-SVQB ne ne 39 S-SZC ne 3 S-SVZC S-SVZB ne ne 3 Screw Lock A-SCLP 19 B-SCLP/-SCLP* ( XBPC/XBPC-) A-SCLC B-SCLC 1 13 A-SUC A-SQC B-SUC B-SQC A-SVUC A-SVQC B-SVUB B-SVQB 1 39 B-SVZB 3 Carbie shank C-SCLP (WBPC) C-SCLC -SCLC* 13 1 C-SUC 8 C-SVUB C-SVQB 1 39 C-SVZB 3 Pin Lock Lever Lock Top Clamp / ouble Clamp Special ouble Clamp CBN Carbie shank Carbie shank T-RX olers S-CLN -CLN S-PCLN B-PCLN S-CLN (BCLN) BNZ ne ne S-UN S-QN -UN S-PUN S-UN (BUN) ne ne S-TR55C T-RX S-PZN S-ZN (BZN) ne * mark: With oil hole The type coes in ( ) are ol type coes.
3 SC- Bar Series Tooling Selection Guie Applications Interior Sphere Bottom Facing Through ole Blin ole Insert shape Construction / Shank material 35 iamon V Trigon /Others W Square S Trigon W / Others Triangular T / Others S-SVJB ne /S-SVJC 38 S-SWUB S-SWUP (BBPW) ne S-SSKP(BBPS) S-SSKC 9 5 S-SWUB(BBPW) S-SWUP ne S-STUP/S-STUB (BBPC) 58 Screw Lock B-SVJB 38 A-STUP B-STUP/-STUP* (XBPT/XBPT-) Carbie shank C-SWUB (WBPW) 55 C-SSKP (WBPS) 9 C-SWUB (WBPW) 55 C-STUP/C-STUB (WBPW) 6 -STUP* (WBPT-) 6 Pin Lock Lever Lock Top Clamp / ouble Clamp Carbie shank S-SKN S-CSKP S-PSKN S-PSYN ne ne S-SKN/S-SYN (BSKN/BSYN) 5 CKB -WLN S-PWLN ne S-WLN ne 5 S-TFN S-CTFP -TFN S-PTFN B-PTFN S-TFN (BTFN) ne ne Soli Carbie shank BXBR 75 CBN Carbie shank BSM ne 76 BNBX 78 BNB 78 SXC ne 77 * mark: With oil hole The type coes in ( ) are ol type coes. 3
4 SC- Bar Ientification SC- Bar Ientification (Roun Shanks) [ISO Stanar] (xample) S 16 R S T U P R Shank material Chart 1 Shank iameter mm Shank length Chart 3 Clamping system Chart Insert shape Chart 5 oler style Chart 6 Relief angle Chart 7 Fee irection Chart 8 Insert cutting ege length mm * Insert thickness mm * Minimum bore iameter mm * These symbols may be omitte epening on the prouct. (Chart 1) Shank material S A with oil hole with vibration B control mechanism with oil hole an vibration control mechanism C Carbie shank Carbie shank with oil hole (Chart 8) Fee irection Symbol Right han Symbol Left han R L (Chart 3) Shank length Symbol Length (mm) Symbol Length (mm) Symbol Length (mm) F 8 M 15 T 3 G 9 N 16 U 35 1 P 17 V J 11 Q 18 W 5 K 15 R L 1 S 5 (Chart ) Clamping system Symbol Clamp type Mechanism example Symbol Clamp type Mechanism example C Top Clamp M ouble Clamp P Top Clamp Pin Lock Lever Lock (Two-sie constraine) + Pin Lock (supporte by 1 lathe) S Screw Lock (Chart 5) Insert shape Symbol Insert shape Symbol Insert shape A B C F Parallelogram 85 angle Parallelogram 8 angle iamon 8 angle iamon 55 angle iamon 75 angle iamon 5 angle 85 M iamon 86 angle 8 O Octagonal 8 P Pentagonal 55 R Roun 75 S Square 5 T Triangle exagonal V iamon 35 angle K L Parallelogram 55 angle Rectangular 55 W Trigon (Chart 6) oler style (The part marke with -- inicates the main cutting ege) Symbol Shape Offset Symbol Shape Offset A 9 B No N No 63 No Q 17.5 R 75 No S 5 F 9 T 6 G 9 J 93 U 93 W 6 K 75 Y 85 L 95 Z 93 (Chart 7) Relief angle Symbol Relief angle A 3 B 5 C 7 15 F 5 G 3 N P 11 SC- Bar Ientification (Roun Shanks) [Sumitomo Stanar] (xample) WB P T 1 R 1 O Special relief angle BB WB XB boring bar Carbie boring bar boring bar with anti-vibration control mechanism With oil hole Minimum bore iameter Symbol R L Fee irection Right Left P Positive Inserts Symbol T S C Insert shape Triangle Square 8 iamon type Symbol Shank iameter (mm) Symbol Insert inscribe circle (mm)
5 Bar Selection Guie Application Minimum Stop Bottom Facing Selection Guie By Application / Process CKB BXBR ABB BSM SXC BNBX BNB S-STUB/ S-STUP [BBPT] A-STUP B-STUP/ -STUP Tool type ne ne [XBPT/XBPT-] C-STUPB/ -STUP [WBPT/WBPT-] S-CTFP S-PTFN B-PTFN S-TFN -TFN S-TFN BTFN BNZ S-SCLC A-SCLC ne ne ne Shank type boring epth (L/) Steel Carbie control Applicable inserts type/shape Coate carbie, SUMIIA specialize insert 5 Coate carbie 5 Braze SUMIIA Braze SUMIBORON SUMIBORON Specialize insert Braze SUMIBORON SUMIBORON specialize insert Colore sections: manufacturable sizes (without oil hole) : In stock : With oil hole in stock Tooling Minimum bore iameter (mm) Note: If ifferent from the machineable iameter in the heaing, it is inicate in the table very very very.5 Triangle 5 positive (with hole) 11 positive (with hole) Triangle 11 positive (without hole) Triangle SUMIBORON specialize insert B-SCLC 8 iamon type 7 positive (with hole) 13 3 The type coes in [ ] are ol type coes
6 Bar Selection Guie C-SCLC control Steel Tool type Carbie Application Colore sections: manufacturable sizes (without oil hole) : In stock : With oil hole in stock Shank type boring Applicable epth (L/) inserts type/shape Minimum bore iameter (mm) Tooling Note: If ifferent from the machineable iameter in the heaing, it is inicate in the table With oil hole -SCLC 1 S-SCLP [BBPC] 8 iamon type 7 positive (with hole) 19 A-SCLP 7 19 B-SCLP/ -SCLP [XBPC/XBPC-] Bottom Facing C-SCLP [WBPC] S-CLN 8 iamon type 11 positive (with hole) ne CLN 3 -CLN S-PCLN ne B-PCLN S-CLN PCLN / CLN 5 8 iamon type 6 [BCLN] 5 -WLN S-WLN ne S-PWLN ne Trigon type S-SUC S-SQC A-SUC A-SQC B-SUC B-SQC ne ne 7, , 9 SQC 8, 3 C-SUC 55 iamon 7 positive (with hole) 8 S-SZC SUC ne Profiling 3 S-SVJB ne 38 B-SVJB 38 S-SVJC 38 S-SVQC S-SVUC ne ne, A-SVUC 35 iamon type 5 positive (with hole) 7 positive (with hole) SVU / SVQ A-SVQC S-SVQB S-SVUB ne ne The type coes in [ ] are ol type coes. 6 39,
7 Bar Selection Guie Application Profiling Through B-SVQB B-SVUB C-SVQB C-SVUB S-SVZB S-SVZC B-SVZB C-SVZB S-QN S-UN Tool type ne ne Shank type boring epth (L/) Steel UN S-PUN ne ne S-UN [BUN] 36 S-PZN ne 37 S-ZN [BZN] 37 S-TR55C S-SWUB [BBPW] 55 C-SWUB [WBPW] S-SWUP ne Carbie control Applicable inserts type/shape Colore sections: manufacturable sizes (without oil hole) : In stock : with oil hole in stock Tooling SVU / SVQ Minimum bore iameter (mm) iamon type 5 positive (with hole) 7 positive (with hole) 55 iamon 37 Specialize S-SSKP [BBPS] 9 C-SSKP [WBPS] 9 S-SSKC S-CSKP S-SKN S-PSKN S-PSYN ne ne S-SKN [BSKN] 5 S-SYN [BSYN] 5 T-RX insert 5.5 Trigon type positive (with hole) 11 positive (with hole) Square 11 positive (with hole) Square 7 positive (with hole) Square 11 positive (without hole) Square The type coes in [ ] are ol type coes
8 SC- Bar Series Complete Support For Operations For Turning General Feature The SC- Bar Series is a collection of SC-Small iameter, a prouct we began selling in 1976 which continues to be popular toay, steel/carbie shank holers with a highly rigi hea esign, SumiTurn X Bar which inclues a vibration control mechanism, an optimize insert graes an chipbreakers. Characteristics Steel Shank With Control Mechanism Compatible with a wie variety of tooling Stop boring / bottom facing / through boring / profiling Minimum machineable iameter: CKB moel ø 1 mm, C-SCLC moel ø 5mm control boring bar, SumiTurn X Bar Carbie short shank is compatible with turret lathes even without cutting (C15M-STUP moel, CM-STUP moel) Insert graes an chipbreakers compatible with a wie variety of work materials ramatically improve chatter resistance, especially effective for rough machining of eep holes Achieves low cost machining for large iameters/eep holes, shank iameters up to ø3 mm are in stock igh chip evacuation performance, evacuates chips with ouble chip pocket s with oil hole are in stock olers for negative inserts (shank iameter ø5 ø5 mm) are in stock Assists evacuation of chips New hea esign New vibration control mechanism X ffective Chattering Killer System vacuation of long chips vacuation of short chips X bar cross section irection to which vibration generates uring cutting Strong cross-section withstans high cutting forces igh rigiity rib Flattene weight vibrates with opposite phase from the chatter an ramatically reuces chatter! Shank Material Selection Bar type Machining metho Shallow hole General (L/ 3) steel eep hole (L/ 3) igh efficiency machining with wiper insert arene steel/ harene steel machining igh-precision machining conomical with vibration control mechanism igh spee machining conomical Carbie shank Steel Shanks With Control Mechanism, Clamp Position Precaution Label attachment area control may not work correctly if the area near the label is clampe (ue to containing the vibration control mechanism). Therefore, the minimum protrusion length is set at 3.5 (3.5 times shank iameter). : 1st recommenation : n recommenation 8
9 SC- Bar Series Recommene Application Range By Shank Protrusion length / Shank iameter (L/) Carbie shank X bar (Positive insert) X bar (Negative insert) Shank iameter (mm) Achieves eep hole machining of L/ = 6 for machining iameters greater than ø3 mm. Negative chip esign reuces corner cost. With ifferent combinations of a large selection of chip breakers, hanles a wie variety of process, from rough cutting to finishing. Cutting spee: Vc = m/min epth Of cut: ap =.1. mm Fee rate f =.1.3 mm/rev Note: The actual amount of protrusion able to be machine epens on the work material, tool conition, an cutting conitions, etc. Comparison Of Wear By Oil Supply Metho Average wear on relief sie (mm).6.. ry xternal oil supply metho Internal oil supply metho Cutting time (min) Work material: SCM35 Inserts: FX breaker (Grae AC51U) Cutting conitions: Vc = 15 m/min, f =.1 mm/rev, ap =.3 mm Grae Recommenations Insert grae category Coate carbie Cermet Coate cermet Carbie CBN (SUMIBORON) PC SUMIIA CV PV Application range igh precision Finishing Light cutting Meium cutting AC81P AC85P AC8P AC83P AC6M AC63M AC5K AC15K ACK ACZ15 AC51U AC5U AC53U AC13U T1A T15A/T15Z T3Z BN1 BN BNC1 BNC BN75 A1 A15 G1 BN7 AC6M Work material P M K S N eat Nonferrous General Stainless Cast arene Carbie resistant steel steel iron steel alloy metal : 1st recommenation : n recommenation : 1st recommenation : n recommenation Chipbreaker Recommenations M Class: Finishing to Light Cutting M Class: Light-Meium Cutting G Class With Groun Chipbreaker G Class: Chipbreaker epth of cut (mm) FK LU LUW epth of cut (mm) SU SF US MU epth of cut (mm) FX FYS S W SW epth of cut (mm) SI FC SC.. Fee rate (mm/rev).. Fee rate (mm/rev) FY.. Fee rate (mm/rev).. Fee rate (mm/rev) 9
PinzBOHR High Precision Boring Tools
PinzBOHR High Precision Boring Tools What to expect from our boring tools. Our European mae boring tools have been proven worl wie to be among the best you can buy. Machinists love our boring tools because
More informationBuilt for Speed. Pinzbohr High Precision Boring Tools. Pinzbohr Modular Boring System. BohrSTAR Boring Kits. Rough and Finish Boring Heads
Pinzbohr High Precision Boring Tools BohrSTAR Boring Kits Rough an Finish Boring Heas Boring Hea Toolholers Carbie an HSS Boring Bars Built for Spee. BohrSTAR High Precision Kits Range 0.314" up to 8.27"(8mm
More informationNSK Ball Screws for Standard Stock
NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar stock series assures immeiate elivery. New! Patent Pening BSS Series next-generation
More informationMetal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit
HSS-E IN 338 cobalt 72-75 HSS IN 338 groun 76-79 HSS IN 338 stanar 80-84 HSS IN 338 stanar, shank reuce 85 HSS IN 340 86 HSS IN 1869 87 HSS hollow section rill bit / facae rill bit 88 HSS IN 345 89-90
More informationMETAL DRILL BITS STRONGER THAN STEEL HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
STRONGER THAN STEEL RILL 307 HSS-E IN 338 cobalt 76 79 311 HSS TIN IN 338 steel rill bit 80 81 302 HSS IN 338, groun, split point 82 85 300 HSS IN 338, stanar 86 90 300 HSS IN 338, stanar, shank reuce
More informationNSK Ball Screws for Standard Stock
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228--21, факс (495) 223-371 NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar
More informationManual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
More informationInventory Article No. Precision mm 0.01mm 35um 386g. Precision A
DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS
More informationExternal Holders D1 to D33
External olders 1 to 33 Selection Guide... 2 Overview... 4 Insert Grade Selection Guide... 6 Chipbreaker Selection Guide... 7 Special Tool olders For Small Parts SEC-Round Shanke olders SEC-Mini Tool Zero
More informationInformation. Plate Cylinder Type C(L)KU32. HIGH type. (Magnetic field resistant auto switch) New. New. New Newly added guide pins
Information Pin lamp yliners ompact yliner Type (L)G32 Magnetic fiel resistant auto switch mounting type LOW type (-X81) HIGH type (-X82) Plate yliner Type (L)U32 Magnetic fiel resistant auto switch mounting
More informationAD-2D NEW Drilling Solid carbide 2xD
l A-2 NEW rilling oli carbie 2x irst choice in quality an performance Carbie rill with EgiAs coating Up to 2x or general purpose steels an cast iron 112 sizes P P P P K K H H H C: 0,2% C: 0,25-0,4% C:
More informationE2EM-X4X1 2M * E2EM-X4X2 2M Shielded E2EM-X8X1 2M * E2EM-X8X2 2M. M30 15 mm E2EM-X15C1 2M E2EM-X15C2 2M. M18 16 mm E2EM-X16MX1 2M E2EM-X16MX2 2M
Long-istance Proximity Sensor EEM CSM_EEM_DS_E_6_ Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for
More informationOmslag. Main Catalogue EN
Omslag Main Catalogue EN We reserve the right to moify any specification an/or item shown in the present catalogue without notice. Information, photos, rawings an technical ata specifie in the publication
More informationTungsten Carbide Burrs
Tungsten Carbie Burrs Material Groups,, Types of Cut PFERD tungsten carbie burrs are esigne for machining materials of virtually any strength. Their superior performance reflects an optimum combination
More informationLive Centers. High Speed Steel Main Line
ive enters igh Spee Steel Main ine MIN-IN: Reliable top of the range live center for N an conventional lathes, an grining machines With over-pressure security through isc springs oy an spinle moels: SM
More informationHigh-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
More informationVolute Centrifugal Pumps PN 16 / PN 25 for Heat Transfer Media Thermal Oil up to 350 C Hot Water up to 204 C. Series NTWH/CTWH process model
Volute Centrifugal s PN 16 / PN 25 for Heat Transfer Meia Thermal Oil up to 350 C Hot Water up to 20 C Series NTWH/CTWH process moel Series NTWH/CTWH Series NBWH/CBWH block moel Series NIWH/CIWH in-line
More informationTriple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
More informationHitachi Tool Engineering Europe GmbH. No
Hitachi Tool Engineering Europe GmbH No. 324.3 Inexable illing Too AS The new AS/AHU ini has 2 kins of insert shapes an applications: JDT type insert for 90 cutting JDT Schneiplatte für 90 Bearbeitungen
More informationSIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
More informationThe Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use
C-ROM Sizing Software ETP Keyless Shaft Mount Connections The Ieal ocking evices For Shaft-to-Hub Connections. ETP Connections are ieal for positioning an locking shaft components in a system. They are
More informationProduct Range. Butterfly Valve Type
Prouct Range Butterfly Valve Type 567 ist of Abbreviations ANSI American National Stanar Institute ASTM American Society for Testing an Materials BS British Stanar IN eutsche Inustrie-Normen ISO International
More informationTapping attachments Tap chucks Cutting fluids
Tapping attachments Tap chucks Cutting fluis Quality, reliability an goo service are what TAPMATIC stans for Since its establishment in 1952, Tapmatic has manufacture tapping attachments of the highest
More informationE2ER/E2ERZ. Reduce Failures From Cutting Oil Ingress. Features. Applications. Patent Pending Heat-Sealing Method
Oil-resistant Proximity Sensors Reuce Failures From Cutting Oil Ingress Fluororesin cable withstans cutting oil Sealing metho eliminates gaps at cable joints Resin filling blocks ingress IP67G* egree of
More informationØ range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max
Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range
More informationGrooving Tool Holders GND Type
TOOLING NEWS E-112 P M K N S H Tool Holders Expansion 6 s of Chipbreakers Characteristics Wide range of application processes Applicable for grooving, turning, copying, facing, boring and cut-off. Achieving
More informationOn the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used
V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow
More information2015~2016. Cutting Tools Catalogue
2015~2016 Cutting Tools Catalogue Vol.16B Winstar Cutting Technologies Corp. Is a Taiwanese company that starte operations in the year 2008 by Tim Chen following a ream an personal interest in eveloping
More informationFULL COMPLEMENT NEEDLE BEARINGS
FULL OMPLEMENT NEELE EARINGS Technical features Full complement neele bearings These bearings are available with or without an inner ring from 12 bore size. Stanar complete bearings type NA have an inner
More informationBall and Roller Bearings
Ball an Roller Bearings Ball an Roller Bearings Introuction Business publication Ball an Roller Bearings ZVL - ZKL offers a survey of the basic types an sizes of bearings being prouce an elivere uner
More informationOn Aluminum. we have an edge! Aluminum. 3-Flute Series for. Get maximum return on performance with Dura-Mill s FEATURES
On Aluminum we have an ege! Get maximum return on performance with Dura-Mill s 3-Flute Series for Aluminum U.S. Patent 6,899,494 FEATURES Proven an patente WhisperKut Design ensures stability an chatterfree
More informationAngular contact ball bearings
Angular contact ball bearings 7200 BE CB Y HC5 Nomenclature 1 2 3 4 1. esign: 2. Clearance: 3. Cage esigns: B BE A E NR N2 2Z 2RS1 40 contact angle 40 contact angle, high capacity, all ISO corners Conra
More informationSplit pillow blocks
Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with
More informationCAST STEEL FLOATING BALL VALVE
CAST STEEL FLOATING BALL VALVE Stanar an Prouct Range Technical Innovation Design an Inspection Stanar: Pressure-Temperature Ratings Shell Wall Thickness Flange Face-to-face Dimensions Socket Wel & NPT
More informationHIGH PERFORMANCE HOLE MAKING APPLICATIONS DIJET DRILL SERIES HOLE MAKING SERIES CATALOG NO DIJET INCORPORATED
HOE MAKING SERIES CATAOG NO. 000 HIGH PERFORMANCE HOE MAKING APPICATIONS IJET RI SERIES IJET INCORPORATE www.ijetusa.com Inexable S-Cut 40º Specifications - rilling epth 3x iameter PARTS l l Screw Wrench
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More informationTension / Compression tap chucks for tapping cycles that are not synchronized
Tension / Compression tap chucks for tapping cycles that are not synchronize For tapping applications on CNC machines where the revolutions per minute an fee rate are not synchronize to the tap pitch,
More informationDeep groove ball bearings
Deep groove ball bearings 6200-2 J/C3 HC5 GJN Nomenclature 1 2 3 4 5 1. Seals, shiels & snap rings: 2. Cage esigns: 4. Suffix: RSH RS2 RSL R 2RSH 2RS2 2RSL 2R 2 NR Contact seal of synthetic rubber (NBR)
More informationExpansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch).
igh Efficiency Cutter for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes
More informationWIMA FKP 4. Typical Applications. Construction. Packing. Mechanical Tests
WIMA K 4 olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts an Self-ealing, Internal Series Connection for Increase Current Carrying Capability CM 1 mm to 37.
More informationCATALOG
CATALOG www.jrbearing.cn www.importbearing.ru 1 The contents of this catalog are subjecte to change without prior notice. Every possible effort has been mae to ensure that the ata herein is correct; however,
More informationReduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
More information/00 RK 09/2017 EN RIVKLE. Blind rivet nuts and studs
9990000000 RK 09/20 N RIVK lin rivet nuts an stus RIVK 2 Page Principle an function 4 tanar RIVK blin rivet nuts 14 RIVK HRT - High Resistance Threa 36 HRT RIVK FC - For Fiber-reinforce polymer 38 FC RIVK
More informationExpansion. Achieves high-efficiency milling with V f of over 20,000mm/min thanks to more teeth (3 edges per inch).
igh Efficiency for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes and BBT30
More informationPipe bracket spacing and support of pipelines
Pipe an support of pipelines General Pipe support for plastics pipes Plastic pipe systems shoul be installe using supports esigne for use with plastics an shoul then be installe taking care not to amage
More informationGrooving / Cut-Off. Threading Tools F63
/ / 1 42 Triangular hallow Inserts (or External and Internal Grooves) External ace Internal Hardened teel Expanded Expanded Expanded EC- election Guide...2 GWC Type (or hallow Grooves)... 4 GWC Type (or
More informationCapacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:
olypropylene () Capacitors for ulse Applications with Metal oil Electroes, Schoopage Contacts, ouble-sie Metallization an Self-ealing Internal Series Connection for ighest Current Carrying Capability 1
More informationTechnical features. Cam followers
AM FOLLOWERS Technical features am followers Naella cam followers are esigne to run irectly on various types of surface such as cams, ramps an slieways. In orer to satisfy the operating conitions impose
More informationRoundWay Linear Roller Guides #11
RounWay Linear Roller Guies #11 3 13 1 2 4 NW 5 NW 6 8 10 NW NW 7 9 11 12 14 IGST LODS, OST RUGGD, STST SPD ND LRTION RounWay* Linear Roller Guies Offer: Up to twenty times the loa capacity of conventional
More informationSEC-Grooving Tool Holders. Stable Machining through Outstanding Chip Control and Chattering Resistance Performance
Product News No.492 Grooving / Cut-off Tools EC-Grooving Tool s 12-017 (GND型) -7$ (&2 352'8&7 ష෭ Ӥ أܞ ܞ Ӕ -7$ գ ଳཋ ട (GNDI型) table Machining through Outstanding Chip Control and Chattering Resistance Performance
More informationMini Mill-Thread (cont d) Mill-Thread Solid Carbide. Mill-Thread Solid Carbide for Threading and Grooving Deep Parts. Mini Chamfer Tools 34
Metric recision Toos t. CONTENTS Mi-Threa Soi Carbie rouct entification with cooant bore with interna cooant through the futes G ( ) G ( ) with interna cooant through the futes Whitworth with interna cooant
More informationInstallation, Operation and Maintenance Instructions. Installation, Operating and Maintenance MANUAL. 2 Model 2DDSX04 MK6
Double Disc Pumps Installation, Operating an Maintenance MANUAL 2 Moel 2DDSX04 MK6 PENN VALLEY PUMP Co. Inc. 998 Easton Roa, Warrington, Pa. 18976 (215) 343-8750 Fax (215) 343-8753 www.pennvalleypump.com
More informationE3000 Series. Electric System. ø1.18", ø0.98", ø0.79" ø1.18", ø1.0", ø0.98", ø0.897" ø1.97", ø1.18" 7 TECHNICAL DATA 8 APPLICATION EXAMPLES
NC / CNC LATHE & AUTOTION SOLUTIONS Series Electric System,~, min - (rpm) One Piece Type Outsie Diameter Moular Type Outsie Diameter,, ø.9" (ø,, mm),,, (ø,.,,. mm) ispee / / -,rpm E ø." ø.9" ø." ø.9",~,
More informationCoorinate Measuring Machine Applicable Probe Hea ZEISS HSS VAST ZEISS Probe Hea Specifications Probe Hea VAST-XT Stylus + extension maximum length () Stylus minimum tip iameter () Stylus + extension maximum
More information5 Bearing Preload and Rigidity
Technology>Precision>Innovation outer ring. 2)The contact surface pressure on the raceway surface reaches 4200Mpa or 428kgf/mm2 in either the inner or outer ring raceway. The allowable axial loa for each
More informationROLLER CHAIN SPROCKETS
ROLLER CHAIN PROCKE ypes an Materials Correct engagement between roller chain an sprocket is require for smooth transmission of roller chain. Appropriate selection of number of teeth (spee ratio), center-to-center
More information10/2017. Product Catalogue BRONZE BARS AND BEARINGS. Your first choice in bronze
10/2017 Prouct Catalogue BRONZE BARS AN BEARINGS Your first choice in bronze Oy Johnson Metall Ab Your first choice in bronze Oy Johnson Metall Ab casts an machines bronze-alloy plain bearings an machine
More informationShaft Diameter d 1 3 /16 01 B /4 01 B /16 01 B /2 01 B /16 01E B /4 01E B
Lubrication Fittings Lubrication points are tappe 1/4 NPT or 1/8 NPT epening on size an series, an fitte with nipples for grease lubrication as stanar. nipples may be remove an replace with other fittings
More informationOther materials are available on request. Operating conditions
Merkel U-Ring T 18 Merkel U-Ring T 18 Asymmetrical sealing lip POM back-up ring PUR profile ring Profile ring Coe Harness Polyurethane 95 AU V142 95 Shore A Fig. 1 Merkel U-Ring T 18 Back-up ring Polyacetal
More informationSection 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP/TEP
ection 3: Introuction Forewor AVX offers a broa line of soli Tantalum capacitors in a wie range of sizes, styles, an ratings to meet any esign nees. This catalog combines into one source AVX s leae tantalum
More informationQuick-change adapters, positive drive inch sizes
P Quick-change aapters, positive rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable
More informationKGD for Automatic Lathe
Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535
More informationSTROKE BUSH SLIDE ROTARY BUSH STROKE BUSH
STROKE BUSH STROKE BUSH STRUCTURE AN AVANTAGES E- AOWABE SPEE FOR COMBINE ROTATION AN STROKE MOTION E- RATE OA AN RATE IFE E- FIT E- USE AN HANING PRECAUTIONS E- IMENSION TABE E- SRE SERIES STRUCTURE AN
More informationRod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread
Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel
More informationAir Vent Valve Selection
Selection 1. TA-3 TA-3C TA-2 TA-2C TA-5 TA-5F TA-6 293 294 294 294 293.3 1. 35 TA-11 TA-11L TA-18 TA-18L TA-22 TA-22L TA-16 TA-16CVA TA-16CVS TA-16L TAV-2 TAV-3A 295 295 296 296 297 298 298 297 Steam Oil
More informationIndustry. SNR : The Bearing Housings
Inustry SNR : The Bearing ousings Contents Page Bearing ousings n Mounting ccessories 2 ousings 3 Bearings 4 Sealing Systems 6 ubrication 8 Bearing Clearance 10 Mounting Tools 12 Bearing rrangement 13
More information60.08 Style 233S Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33S Restraine Flexible Coupling Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33S stainless steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
More informationKUNSTSTOFF-METALL-FORMTEILE CROSSED-ROLLER-SLIM-SPLIT-BEARING. Crossed roller bearing PSX-08. Crossed roller bearing PSX-08 83
CROSSE-ROLLER-SLIM-SPLIT-BEARING Crosse roller bearing PSX-08 Crosse roller bearing PSX-08 83 CROSSE-ROLLER-SLIM-SPLIT-BEARING KUNSTSTOFF-METALL-FORMTEILE escription of shape Crosse roller bearings are
More informationNew Super Metric Ball Bushing * Bearings Technical Bulletin
ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive
More informationSolenoid Valve. Motor Valve Air Operated Valve Emergency Shutoff System
Motor Valve Air Operate Valve Emergency Shutoff System Selection Motor Valve Selection Air Operate Valve Selection 0-2 0-0. 0-0- 0-175 160 1 175 0.05-0- 1 188 187 188 188 187 175 175 178 178 DD-1S DD-2
More informationLinear Ball Bearings, Shafting & Supports Overview
Linear Ball Bearings, ing & Supports Overview Linear Ball Bearings, ing & Supports high performance linear ball bearings, shafting an shaft supports are now available from PTI. Available in Inch an Metric
More information*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
More informationModels S Regulator
Moels 441-57S Regulator RM-1360 R9 Installation an Maintenance Instructions The is an excellent general purpose gas pressure regulator for larger loas. Use it for natural gas, air, ry CO2, propane, butane,
More information* Please mention "Code Number" upon your order.
BRUSHLESS MOTOR & SPINDLE FOR Series Please mention " Number" upon your orer. '...A PRK25E Ver. E25 SERIES Ultra Precision Excellent urability an high rigiity are obtaine using a highspee brushless motor.
More informationKeyless Locking Devices
Keyless ocking evices IC 100 IC 100 s N/ 2 17 47 20 26 6 16 260 31 104 18 47 20 26 6 16 280 31 104 19 47 20 26 6 16 290 31 104 20 47 20 26 6 16 310 31 104 22 47 20 26 6 16 340 31 104 24 50 20 26 6 16 370
More informationShyam Enterprises 5 HEAT EXCHANGERS
Shyam Enterprises HEAT EXCHANGERS 33 Heat Exchangers Introuction The overall heat transfer coefficient of borosilicate glass equipment compare favourably with many alternative process plant construction
More informationCONTROL HANDWHEELS CONTROL HANDWHEELS
CONTROL HANWHEELS 2 ART. 205 TWO SPOKE CONTROL HANWHEEL Reinforce an stabilise polyamie. Oils an greases resistant. HANWHEEL COLOUR: CENTRAL CAP: Grey polyamie (RAL 7035 coe 13). ALTERNATIVE CAP COLOUR:
More informationTOOLS NEWS B194H PVD coated Cermet grade for steel MP3025. Produces excellent surface finishes.
TOOLS NEWS PVD coated Cermet grade for steel 3025 2014.01 B194H Produces excellent surface finishes. PVD coated Cermet grade for steel PVD coated Cermet grade for steel 3025 3025 3025 has excellent flank
More information60.07 Style 233 Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33 Restraine Flexible Coupling For Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33 carbon steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
More informationEdition Selection Guide for Inch Size Ball Bushing Bearings
2003-200 ition Selection Guie for Inch Size all ushing earings 1-800-55-866 www.thomsonballbushing.com Mechanical an lectro-mechanical Prouct Solutions by anaher Motion anaher Motion engineers, manufactures
More informationyour reliable partner EAS -Compact K.490.V16.EN
ES -Compact K.490.V16.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one of the most traitional an yet most innovative
More informationHIGH PRESSURE - hydraulic cylinders
SSU - hyraulic cyliners A, type aterial: rotective coating: eium: ax. piston spee : ax. working press.: Carb. steel an cast iron (hea) U,, O, T rimer (option), chromiumplate yraulic oil 0.5 m/s 200 From
More informationMicro-Grinder AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 250 WEST DUARTE ROAD, #E MONROVIA, CA USA
Micro-Griner Air Driven 0,000 min - (rpm) 0,000 min - (rpm) PRESTO 0,000 min - (rpm) MODULAR TYPE HIGH TORQUE AIR GRINDER High torque air motor assemble with special vane mechanism. Two types of air motors
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationFP-4000 Series FLOAT LEVEL SWITCH OUTLINE MAIN APPLICATIONS STANDARD SPECIFICATION
FOR MULTIPOINT LEVEL ALARM ETECTION BY ONE UNIT FP- Series FLOAT LEVEL SWITC OUTLINE The FP- series is a float level switch, which is installe through the tank nozzle on tanks an/or pits. Level alarm etection
More informationProduct Range. Butterfly Valve Type 567
Prouct Range Butterfly Valve Type 567 Butterfly valves SYGEF SYGEF stanar Butterfly valve type 567 PVF Bare shaft Moel: Ï Connecting imension: ISO 7005 PN 10, EN 1092 PN 10, IN 2501 PN 10, Ï Overall length
More informationMetal Hoses and Expansion joints for Gas Applications
Metal Hoses an Expansion joints for Gas Applications 3356e/1/02/09/2,5 Witzenmann GmbH Östliche Karl-Frierich-Str. 134 75175 Pforzheim, Germany Phone +49 - (0)7231-581 - 0 Fax +49 - (0)7231-581 - 820 wi@witzenmann.com
More informationD I S C C O U P L I N G S
DISC COUPINGS DISC COUPINGS MAIN FEATURES The isc coupling is of the continuous ring laminate metallic iaphragm type with blaes in stainless steel. The torque is transmitte in pure tension through alternate
More informationD24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30
3 Code System 02 Holder Code System Thread Inserts 24 American ACME 02 Insert Code System 25 Stub ACME 03 Technical Information for 26 28 28 UNJ (Unified Constant Thread) American Buttress (ABUT) British
More informationTHREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
More informationProduces excellent surface finishes.
TOOLS NEWS PVD coated Cermet grade for steel 3025 2013.12 Update B194G New positive breaker for steel Produces excellent surface finishes. PVD coated Cermet grade for steel 3025 3025 has excellent flank
More informationBimetal thermometers Index
Inex eneral information Prouct information With brass pocket page Inex 685 Brass pocket; Aluminium case 686 Brass pocket; 687 With brass probe page Brass probe; Aluminium case; Air uct thermometer 688
More informationHepcoMotion. Shaft precision steel and aluminium shaft
HepcoMotion Shaft precision steel an aluminium shaft Introucing the HepcoMotion Precision Shaft Correct Shaft selection is vital if maximum performance is to be achieve from your linear system. Hepco Precision
More informationFAX FAX
2 seals on eman HERCULES SEALS ON EMAN provies a wie selection of custom, cost effective sealing solutions using avance rapi-prototype technology. The programmable CNC prouction cell can manufacture both
More informationKGD/KGDF KGD/KGDF. Grooving / Cut-Off. Improved Grooving Performance with Expansive Lineup of Chipbreakers and Toolholders. Grooving / Cut-Off
Grooving / Cut-Off KGD/KGDF Grooving / Cut-Off KGD/KGDF Improved Grooving Performance with Expansive ineup of Chipbreakers and s Good chip control EGACOAT coating technology for long tool life and high
More informationULTRA-PRECISION BRUSHLESS MICRO-GRINDER ESPERT 500
ULTRA-PRECISION BRUSHLESS MICRO-GRINDER 00 Evolutionary New Design High-Performance Brushless Micro Griner. Ultra-Precision Micro-Griner The Espert 00 brushless motor takes motor technology to an even
More informationMill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
More information0200/11.02 AMTEC. Precision thread inserts for plastic parts and equipment for installation
0200/11.02 AMTEC Precision threa inserts for plastic parts an equipment for installation AMTEC threa inserts Contents Page AMTEC highly wear-resistant threa inserts for plastic parts 3 The avantages an
More informationE R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
More informationAccessory pack includes: A. Auxiliary tool x1 B. Spindle bolt x1 C. Set screw x2 D. Seal washer x1 E. Tall cable guide x1 D. E.
CK-5000T Metropolis Patterson Transmission Crankset Installation Instructions Publishe July, 2011. ZSxxx.v0 Full Spee Ahea Installation Instructions Congratulations on your Full Spee Ahea prouct. Please
More information