E3000 / E3200 Series. Electric System. ø1.18"(ø30 mm) ø0.897"(ø22.8 mm) ø1.0", ø0.98"(ø25.4, ø25 mm) ø1.18", ø1.97"(ø30, ø50 mm)
|
|
- Theodore Silas Rich
- 6 years ago
- Views:
Transcription
1
2 NC / CNC LATHE & AUTOTION SOLUTIONS / E Series Electric System AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - Outsie Diameter,~, min - (rpm) Output W One Piece Type Outsie Diameter,~, min - (rpm) Output W Moular Type Outsie Diameter Outsie Diameter,, (ø,, mm) (ø mm),~, min - (rpm) Output W Moular Type,~, min - (rpm) Output W Moular Type Outsie Diameter, (ø., ø mm) (ø. mm), ø.9"(ø, ø mm),~, min - (rpm) Output W Moular Type ispee E E E E ø." ø." ø.9" HES HES -p
3 / E SERIES LINE UP AMERICAN ROTARY TOOLS CO. ispee E E E E ø." ø." ø.9" HES HES One Piece Type Straight Motor Spinles Max. Spee (rpm) O.D. Collet Features Page,,,,,,,,, Moular Type Straight Spinles Max. Spee (rpm), (ømm) E-K CHK -p (ømm) E-A CHA for light uty Grining -p (ømm) EMR-K CHK -p9 (ømm) EM-S CHK -p (ømm) EM-S CHA -p (ømm) EM-S CHA -p Straight Motor Spinles (Flange Type) Flange Type EF-K CHK -p 9 Angle Motor Spinle,,,,, (ømm) E-K CHK Collet Size : Max. ø. -p (ømm) E-S CHSS Collet Size : Max. ø. -p O.D. Collet (ømm) NR-S CHA Page -p9 (ømm) NR-S CHK -p (ømm) NR-E CHK -p (ømm) NR-E CHK -p (ø.mm) NR-H CHK -p (ømm) NR- CHK -p Motors Max. Spee (rpm), EM-J, EM-, EM-J, EMN--J Page -p -p -p9 -p,, (ø.mm) NR- CHK -p9 (ø.mm) NR- CHK -p9, EM--J -p -p
4 AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - Moular Type 9 Angle Spinles Max. Spee (rpm),9,,,9,,9,9, ATC Spinles,, Motors O.D. Collet Page Max. Spee (rpm) Page (ømm) RAS-E CHK -p (ømm) RAX-E CHK -p (ømm) RAX-E CHK -p (ømm) RA-E CH -p (ømm) RA-E CHS -p (ø.mm) RAS- CHK -p (ø.mm) RA- CH -p (ø.mm) RA- CHS -p ø.9" (ømm) NR- ATC CHR -p ø." (ømm) NR- ATC CHB -p Spinle for eep hole grining,, Lever Type Spinle,, (ø.mm) NR- CHK -p (ø.mm) AMH- CHM -p ø." (ø.mm) NRR- CHB -p ø." (ø.mm) NRR- CHB -p Quick Change Spinle,, EM-J, EM--J, EM-, EM-J, EM--J, EM-, EM-J, EMN--J CHK (ømm) NRR-QC -p, CHA EM- -p -p -p -p9 -p -p -p9 -p -p ispee E E E E ø." ø." ø.9" HES HES Air Bearing Spinle (Flange Type), EM-J -p9, Flange, Type NRAF- CHK -p9 -p EM-J -p
5 BRUSHLESS MOTOR SPINDLE SERIES One Piece Type,, (ø, ø, ø mm),~, (rpm) min- Max. Output W {For (ø mm)} brushless DC Motor Spinle with an outsie iameter of,, (ø, ø, ø mm). Designe for high spee milling an rilling, etc on CNC lathes an special purpose machines. Compact size makes it very easy to incorporate into machine esign. One Piece Type,, (ø, ø, ø mm) System Chart Collet Nut K- Collet CHK-[][] Arbor for Metal Saw KCH- ispee E E Grinstone Arbor AGM- Brushless Motor Spinle E-K Motor Cor (Cor with Quick Disconnect) EMCD-J- M/M/M/M Grinstone Flange EGF-9 Brushless Motor Spinle EF-K Motor Cor (Cor with Quick Disconnect) EMCD-J- M/M/M/M E E Collet Nut CHN-A Collet CHA-[][] Brushless Motor Spinle E-A Motor Cor (Cor with Quick Disconnect) EMCD-J- M/M/M/M Collet Nut K- Collet CHK-[][] ø." ø." ø.9" HES HES Arbor for Metal Saw KCH- Grinstone Arbor AGM- Collet Nut K- Collet CHK-[][] Brushless Motor Spinle EMR-K Brushless Motor Spinle EM-S Motor Cor (Cor with Quick Disconnect) EMCD-J- M/M/M/M Motor Cor EMCD-- M/M/M Selector Unit NE Only one motor can be operate at a time. No simultaus operation. Control Unit NE NE-OP V Collet Nut CHN-A Collet Nut K- Collet CHA-[][] Collet CHK-[][] Arbor for Metal Saw KCH- Brushless Motor Spinle EM-S Brushless Motor Spinle EM-S Brushless Motor Spinle E-K Motor Cor EMCD-- M/M/M Motor Cor EMCD-- M/M/M Motor Cor (Cor with Quick Disconnect) EMCD-J- M/M/M/M Compressor Air Line Kit AL- Clean ry air is require. : Motor Cor is Sol Separately. Please see for -p9. Grinstone Arbor AGM- Collet CHSS-[][] Brushless Motor Spinle E-S Motor Cor (Cor with Quick Disconnect) EMCD-J- M/M/M/M : Motor Cor is Sol Separately. Motor Cor EMCD-A-M/M/M (9º Angle Type) is available. Please see for -p. -p AMERICAN ROTARY TOOLS CO.
6 AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - Features of Series EM-S Maximum Motor Spee, min - (rpm) The maximum motor spee, min - (rpm) is realize by using high performance brushless motor an ceramic bearings. Maximum Motor Output with W Power Supply W for (ø mm) spinle. W for (ø mm) an (ø mm) spinle. Motor Spinle Diameter A (ø mm), (ø mm), (ø mm) motor spinle iameter are available. Air-Cooling System Air-coole motor uses a small volume of air (. CFM) to minimize heat builup an allow continuous operation. Air pressure require is - PSI. Spinle Accuracy Spinle Accuracy is within μm (TIR). High Rigiity, Short Boy series uses a short boy that is harene an precision groun for excellent urability. Motor Connector Attaches Directly to the Back of the Motor / Spinle. Simple screw-lock connector makes changing motors extremely easy. Electric an Air fee incorporate into a single connector. Power Source Auto Detection Power Source is -V for international operation. Eliminate the nee of setting the voltage or changing fuses. Automatic Control System Chart Single Motor Spinle Operation Motor Spinle Motor Cor Air NE Control Unit Air ON/OFF R/L Compressor Sequence Motor Cor Sol Separately Protection System, External Input / Output Control Signal Error function : Motor/Spinle is stoppe safety, Error LED is lit. ex.) Overloa operation, Air shortage, Motor Spinle can be controlle an monitore by external input-output connector. ex.) Control ; Start/Stop, FWD./REV., Motor Spee Control Monitor ; Motor rotating, Torque Loa. Use E Motor & Spinle with Control Unit E motor & spinle can be use with control unit. {Less than, min - (rpm)} (ø. mm) Spinle Usage Use (ø. mm) spinles from our general catalog an an EM--J motor {(ø mm) W} with NE. Special Safety Version Available The safety relay utilizes normally open contacts. The emergency stop signal lines must be supplie with power to hol the safety relay contacts close an allow the control unit to supply power to the motor. Any system errors, trouble with the machining center or the connections between the Series control unit an the machining center's controller will cause the relay contacts to open an the Series motor to stop. Centering Moe Switch This switch activates the centering moe, which maintains a constant min - (rpm) spinle spee for centering the tool. Sequential Operation of up to Motor / Spinles Motor Spinle Motor Spinle Motor Spinle Motor Cor Air NE Selector Unit Air Motor Cor Connector for communication Compressor NE Control Unit ON/OFF R/L Motor Selector ispee E E E E ø." ø." ø.9" HES HES Motor Spinle Sequence When connecting NE to NE, up to motors can be connecte to NE proviing iniviual control of each motor. ( motors can not be run simultausly.) -p
7 SERIES CONTROL UNIT AC-V for international operation,~, min- (rpm) Maximum Output W External Input / Output Control Signal (Refer to -p~p page of this catalog) No. 9 CONTROL UNIT NE, min - (rpm) ispee E E E E ø." ø." ø.9" HES HES : Loa Meter LOAD : Continuous loa area : Intermittent loa area : Overloa External Input-Output Connector A (D-SUB Female) External Input-Output Connector B (D-SUB Female) Motor Connector Air Output Joint ø mm Air Input Joint ø mm Power Switch Communicate Connector for NE Intake with Power Fuse 9.9" 9.9"." Control Unit Plug Type Stanar Equipment Accessories 9 V NE."." 9."." 9.".".".".".9" [] Loa Meter [] Running LED (RUN) [] Warning LED (WARNING) [] Error LED (ERROR) [] Error Reset Switch (RESET) [] Gear Setting Switch (GEAR) [] Control Switch (AUTO/NUAL) [] Rotating Direction Selector Switch (FWD./REV.) [9] Start Switch (START) [] Motor Spee Ajustment Switch (SPEED) [] Display [] [] [] [] [] Specifications : NE Power Source : ACV Motor Spee :,-, min - (rpm) Max. Output Power : W (For ) Power Consumption :.A Air Flow Volume :.CFM (-PSI) Weight : lb.. oz. Dimensions : W." x D." x H9." Control Panel Extension Cor Control Panel Extension Cor [] [] Power Cor : ft Air Hose with filter Reucer Air Plug (Provie) Connector Cap (Provie) Bracket Power Cor Grip Screw Rubber Pa Fuse (T.AL) V: pcs. - PEX- [] [] Please refer to Technical Data -p~p in etail about External Input-Output Connector. The NE-OP {No. : 9 (V)} is an Optional Safety Version featuring "Emergency Stop Input" an "Safety Relay". AC-V for international operation. Please check the power source plug type (-p) an orer accoringly. Mounting Bracket."." [9] [],99. NE. -p Mx. Steppe Bracket Bottom Mounting.9".".".".9"."." Back Mounting Mx. Steppe Bracket AMERICAN ROTARY TOOLS CO.
8 SERIES SELECTOR UNIT AC-V for international operation Up to motors can be connecte to NE proviing iniviual control of each motor. (Simultaus motor operation is not possible) No. 9 SELECTOR UNIT NE, min - (rpm) Motor Output Connector ~ Motor Input Connector Air Input Joint ø mm Connector for Communication (D-SUB9 Female) Power Switch Intake with Power Fuse Air Output Joint ~." Specifications : NE Power Source : ACV Power Consumption :.A Air Flow Volume : Max..CFM (PSI / Using max. motor/spinles) Weight : lb.. oz. Dimensions : W." x D." x H9." 9." [9] []." [] Mx. Steppe Bracket 9.9".9"."."." [] [] [] Mounting Bracket Bottom Mounting Selector Unit Plug Type Stanar Equipment Accessories.9"."." [] [] [] [] [] Error LED (ERROR) [] Warning LED (WARNING) [] Running LED (RUN) [] Link LED (LINK) [] Motor Select LED [] Motor Spee Ajustment Switch (SPEED) [] Rotating Direction Selector Switch (FWD./REV.) [] Motor Selector Switch (MOTOR SEL) [9] Display [] FWD./REV. LED (FWD. / REV.) 9.9" Back Mounting."." Mx. Steppe Bracket 9.".".9".".".".9" ispee E E E E ø." ø." ø.9" HES HES 9 Power Source Plug Plug Type Main Usable Area Prouct For V (A type) For V (B type) V For Japan For U.S.A. an Canaa NE Power Cor : ft Connect NE to NE Cable :." Communication Cable :." Connector Cap (Provie) Plug to avoi Air Flow Bracket Power Cor Grip Screw Rubber Pa Fuse (T.AL) V: pcs. Power Source for Global Operation (AC-V). Please check the power source plug type an orer accoringly. Plug Type Main Usable Area Prouct For V (C type) For V (D type) Without Plug For Europe,. AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - Orer by catalog number. -p
9 SERIES (ø mm) BRUSHLESS MOTOR SPINDLE COOLANT No. Series can be use in conjunction with water or oil base coolants. BRUSHLESS MOTOR SPINDLE E-K (.") Max. Tool Mounting Depth, min - (rpm) ispee ø -. mm () ø.".9"." Recommene Clamping Area (.")." (.") (.") ' Quick Disconnect Cor E E E E Motor Spee..., min - (rpm) Spinle Accuracy... Within μm Max. Output Power... W Stanar Size Collet (CHK-.)... ø/" Weight... lb..9 oz. < Optional > Collet (CHK-[][])... ø. mm~ø. mm (See Page -p for etails) Motor Cor... Length ft,. ft,. ft,. ft Metal Saw Arbor (KCH-)... For ø." (I.D.) x (O.D.) Grinstone Arbor (AGM-)... For grining wheel with I.D. of ø mm Grinstone Flange (EGF-9)... ø9. (I.D.) x ø (O.D.)x (W)mm Brushless Motor Spinle Stanar Equipment Accessories E- K Collet ø/" (CHK-.) : pc. Collet Nut (K-) : pc. Wrench ( x ) : pcs. Note : Motor Cor is sol separately.,. ø." ø." ø.9" HES HES No. ø -. mm () BRUSHLESS MOTOR SPINDLE E-A ø." (.") Max. Tool Mounting Depth Motor Spee..., min - (rpm) Spinle Accuracy... Within μm Max. Output Power... W Stanar Size Collet (CHA-.)... ø/" Weight... lb.. oz. < Optional > Collet (CHA-[][])... ø. mm~ø. mm (See Page -p for etails) Motor Cor... Length ft,. ft,. ft,. ft."." Recommene Clamping Area ' Quick Disconnect Cor (.")." (.") (.") Brushless Motor Spinle Stanar Equipment Accessories E- A For light uty Grining, min - (rpm) Collet ø/" (CHA-.) : pc. Collet Nut (CHN-A) : pc. Wrench ( x ), (9 x ) : pc. each Note : Motor Cor is sol separately.,. -p AMERICAN ROTARY TOOLS CO.
10 AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - COOLANT No. Caution : Use the motor at motor spee less than maximum allowable spee or use the spee reucer. DO NOT excee the allowable motor spee for the spinle an the reucer. BRUSHLESS MOTOR SPINDLE EMR-K (.") Max. Tool Mounting Depth (.") Grease Point Maximum allowable motor spee for the spinle, min - (rpm) Reuction Ratio ø -. mm Maximum rotating spee at the cutting tool, min - (rpm) () ø.".9"." Recommene Clamping Area ' Quick Disconnect Cor (.")." (.") (.") ispee E Maximum allowable motor spee for the spinle Maximum rotating spee at the cutting tool <Reuction Ratio : /> Spinle Accuracy... Within μm Max. Output Power... W Stanar Size Collet (CHK-.)... ø/" Weight... lb..9 oz. < Optional > Collet (CHK-[][])... ø. mm~ø. mm (See Page -p for etails) Motor Cor... Length ft,. ft,. ft,. ft Metal Saw Arbor (KCH-)... For ø." (I.D.) x (O.D.) Grinstone Arbor (AGM-)... For grining wheel with I.D. of ø mm See page -p for the etails on maximum allowable input motor spee. Torque (cn. m) MOTOR CORD 9 Torque Prouct Torque Characteristics Graph E-K, E-A Continuous Duty Area Output Output (W), min - (rpm), min - (rpm) Brushless Motor Spinle Stanar Equipment Accessories Description Length Torque (cn. m) Motor Cor M EMCD-J-M Motor Cor M EMCD-J-M Motor Cor M EMCD-J-M Motor Cor M EMCD-J-M EMR-K Torque Output Continuous Duty Area EMR- K Collet ø/" (CHK-.) : pc. Collet Nut (K-) : pc. Wrench ( x ) : pcs. Gear Grease ( ml) Note : Motor Cor is sol separately. ft (.m). ft (.m). ft (.m). ft (.m),. To exten the life expectancy of the Spee Reucer, inject grease every to hours. Grease injection prevents friction of the internal gears as well as heat generation. Aing grease also prevents the egraation of the existing grease in the reucer. Please maintain a reucer grease maintenance program. Output (W) St. Accessories Air Hose Connector Cap (Provie) E-K E-A EMR-K E E E ø." ø." ø.9" HES HES Spee { x min -(rpm) } Spee { x min-(rpm) } Orer by catalog number. -p9
11 SERIES (ø mm) FLANGE TYPE BRUSHLESS MOTOR SPINDLE COOLANT No. FLANGE TYPE BRUSHLESS MOTOR SPINDLE EF-K, min - (rpm) ispee E E E E ø." ø." ø.9" HES HES Features: mm Spinle with a Pre-mounte (." x.9") Flange. Pre-mounte flange for easy installation on a machines R ø.9" stanar boring bar holer. Eliminates the chance of spinle amage ue to over tightening. Flange is monutable on either sie of the machines holer.." ø." Boy mounting hole -ø. Through hole ø -. mm () ø." (.") Max. Tool Mounting Depth Motor Spee..., min - (rpm) Spinle Accuracy... Within μm Max. Output Power... W Stanar Size Collet (CHK-.)... ø/" Weight... lb.. oz. < Optional > Collet (CHK-[][])... ø. mm~ø. mm (See Page -p for etails) Motor Cor... Length ft,. ft,. ft,. ft Metal Saw Arbor (KCH-)... For ø." (I.D.) x (O.D.) Grinstone Arbor (AGM-)... For grining wheel with I.D. of ø mm Grinstone Flange (EGF-9)... ø9. (I.D.) x ø (O.D.)x (W)mm Torque Characteristics Graph EF-K Torque (cn. m) 9 Torque Continuous Duty Area Output Output (W) No Clamping No Clamping.9"." (.99") (.9") (.")." (.") (.") ' Quick Disconnect Cor Flange Type Brushless Motor Spinle Stanar Equipment Accessories EF- K Collet ø/" (CHK-.) : pc. Collet Nut (K-) : pc. Wrench ( x ) : pcs. Air Hose.m : pc. Hexagon Socket Bolt (M x ) : pcs. Note : Motor Cor is sol separately.,. Spee { x min -(rpm) } -p AMERICAN ROTARY TOOLS CO.
12 MOTOR CORD Prouct Description Length Motor Cor M EMCD-J-M ft (.m) St. Accessories. Motor Cor M EMCD-J-M Motor Cor M EMCD-J-M Motor Cor M EMCD-J-M. ft (.m). ft (.m). ft (.m) Air Hose Connector Cap (Provie) EF-K. 9.. ispee E E E E ø." ø." ø.9" HES HES AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) WEST DUARTE ROAD, #E MONROVIA, CA USA 9- Tel: () - Fax: () - Toll Free USA Tel: () - Fax: () - info@artcotools.com Orer by catalog number. -p
13 SERIES, (ø, ø mm) BRUSHLESS MOTOR SPINDLE COOLANT No. Outsie Diameter (ømm) BRUSHLESS MOTOR SPINDLE EM-S (.9") Max. Tool Mounting Depth (.9").9", min - (rpm) ø -. mm () ø." ispee E.9"." Recommene Clamping Area E E E Motor Spee..., min - (rpm) Spinle Accuracy... Within μm Max. Output Power... W Stanar Size Collet (CHK-.)... ø/" Weight... lb.. oz. < Optional > Collet (CHK-[][])... ø. mm~ø. mm (See Page -p for etails) High precision type is also available for CHK-.,.,.,.,. Refer to -p page of this catalog. Motor Cor... Length ft, 9 ft, ft Brushless Motor Spinle (ø mm) Stanar Equipment Accessories EM- S Collet ø/" (CHK-.) : pc. Collet Nut (K-) : pc. Wrench ( x ) : pcs. Note : Motor Cor is sol separately.,. ø." ø." ø.9" HES No. Outsie Diameter (ømm) BRUSHLESS MOTOR SPINDLE EM-S (.") Max. Tool Mounting Depth (.").9", min - (rpm) HES ø -. mm () ø."."." Recommene Clamping Area Motor Spee..., min - (rpm) Spinle Accuracy... Within μm Max. Output Power... W Stanar Size Collet (CHA-.)... ø/" Weight.... oz. < Optional > Collet (CHA-[][])... ø. mm~ø. mm (See Page -p for etails) Motor Cor... Length ft, 9 ft, ft Brushless Motor Spinle (ø mm) Stanar Equipment Accessories EM- S Collet ø/" (CHA-.) : pc. Collet Nut (CHN-A) : pc. Wrench ( x ), (9 x ) : pc. each Note : Motor Cor is sol separately.,. -p AMERICAN ROTARY TOOLS CO.
14 SERIES (ø mm) BRUSHLESS MOTOR SPINDLE AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - COOLANT No. Outsie Diameter (ømm) BRUSHLESS MOTOR SPINDLE EM-S (.") Max. Tool Mounting Depth (.").", min - (rpm) ø -. mm () ø."."." Recommene Clamping Area ispee Motor Spee..., min - (rpm) Spinle Accuracy... Within μm Max. Output Power... W Stanar Size Collet (CHA-.)... ø/" Weight.... oz. < Optional > Collet (CHA-[][])... ø. mm~ø. mm (See Page -p for etails) Motor Cor... Length ft, 9 ft, ft Brushless Motor Spinle (ø mm) Stanar Equipment Accessories EM- S Collet ø/" (CHA-.) : pc. Collet Nut (CHN-A) : pc. Wrench ( x ), (9 x ) : pc. each Note : Motor Cor is sol separately.,. E E E E MOTOR CORD Straight Type (.") (.") Prouct Description Length 9 Motor Cor M EMCD--M Motor Cor M EMCD--M Motor Cor M EMCD--M ft 9 ft ft St. Accessories Air Hose Connector Cap (Provie) EM-S EM-S EM-S... ø." ø." ø.9" MOTOR CORD 9 Angle Type HES HES.".9" EM-S 9 Torque Prouct Torque Characteristics Graph Description Length Motor Cor M EMCD-A-M Motor Cor M EMCD-A-M Motor Cor M EMCD-A-M EM-S, EM-S 9 Torque ft 9 ft ft St. Accessories Air Hose Connector Cap (Provie) EM-S EM-S EM-S... Torque (cn. m) Output Output (W) Torque (cn. m) Output Output (W) Continuous Duty Area Continuous Duty Area Spee { x min-(rpm) } Spee { x min-(rpm) } Orer by catalog number. -p
15 SERIES (ø mm) BRUSHLESS MOTOR SPINDLE ispee E E E E ø." ø." ø.9" HES COOLANT No. 9 (.")." (.9") 9 ANGLE BRUSHLESS MOTOR SPINDLE E-K.9"." Maximum rotating spee at the cutting tool, min - (rpm) (.9") Max. Tool Mounting Depth ø." Grease Point." Recommene Clamping Area Spinle Accuracy... Within μm Max. Output Power... W Stanar Size Collet (CHK-.)... ø/" Weight... lb.. oz. < Optional > Collet (CHK-[][])... ø. mm~ø. mm (See Page -p for etails) Motor Cor... Length ft,. ft,. ft,. ft Metal Saw Arbor (KCH-)... For ø." (I.D.) x (O.D.) Grinstone Arbor (AGM-)... For grining wheel with I.D. of ø mm See page -p for the etails on maximum allowable input motor spee. No. Reuction Ratio. Caution : Maximum allowable motor spee for the spinle Maximum rotating spee at the cutting tool <Reuction Ratio : /.> Use the motor at motor spee less than maximum allowable spee or use the spee reucer. DO NOT excee the allowable motor spee for the spinle an the reucer., min - (rpm), min - (rpm)." (.9") ø-.mm() (.") ' Quick Disconnect Cor Maximum allowable motor spee for the spinle, min - (rpm) 9 Angle Brushless Motor Spinle Stanar Equipment Accessories 9 E- K Collet ø/" (CHK-.) : pc. Collet Nut (K-) : pc. Wrench ( x ) : pcs. Gear Grease ( ml) Note : Motor Cor is sol separately.,. To exten the life expectancy of the Spee Reucer, inject grease every to hours. Grease injection prevents friction of the internal gears as well as heat generation. Aing grease also prevents the egraation of the existing grease in the reucer. Please maintain a reucer grease maintenance program. 9 ANGLE BRUSHLESS MOTOR SPINDLE E-S HES -p Reuction Ratio. (.")." (.").9".9" Maximum rotating spee at the cutting tool, min - (rpm)." (.") Max. Tool Mounting Depth ø." Maximum allowable motor spee for the spinle Maximum rotating spee at the cutting tool <Reuction Ratio : /.>." ø." Recommene Clamping Area." (.") Spinle Accuracy... Within μm Max. Output Power... W Stanar Size Collet (CHSS-.)... ø/" Weight... lb.. oz. < Optional > Collet (CHSS-[][])... ø. mm~ø. mm (See Page -p for etails) Motor Cor... Length ft,. ft,. ft,. ft See page -p for the etails on maximum allowable input motor spee., min - (rpm), min - (rpm) AMERICAN ROTARY TOOLS CO. (.") ø-.mm() ' Quick Disconnect Cor Maximum allowable motor spee for the spinle, min - (rpm) 9 Angle Brushless Motor Spinle Stanar Equipment Accessories E- S Collet ø/" (CHSS-.) : pc. Wrench ( x.), ( x.) : pc.each Note : Motor Cor is sol separately.
16 SERIES MOTOR CORD & AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - MOTOR CORD Prouct Description Length Motor Cor M EMCD-J-M ft (.m) St. Accessories. Motor Cor M EMCD-J-M Motor Cor M EMCD-J-M Motor Cor M EMCD-J-M. ft (.m). ft (.m). ft (.m) Air Hose Connector Cap (Provie) E-K E-S. 9.. ispee E E Torque Characteristics Graph E-K, E-S Torque (cn. m) Torque Output Continuous Duty Area. Spee { x min -(rpm) } Rotary Coupling An electric/pneumatic coupling is now available that allows NAKANISHI Electric Spinles up to mm iameter, to be mounte to the turret of a CNC turning machine. The rotary coupling prevents power cable an pneumatic lines from getting tangle when the turret is rotate. Contact NSK America at -- for complete etails. Output (W)."." No. AL PF/."."."." 9.".9".".9" AL- Air Line Kit (For ø mm Hose Filter Mesh. μm) Stanar Equipment Accessories Air Filter Air Regulator Air Pressure Gauge AL AL- Air ON-OFF Valve. Hose for Piping (K-) : ft The AL- is a Clean air supply unit for the / E Series control unit. Dust in the compresse air is eliminate by the filter in the first stage an regulator provies accurate an stable air to the control unit. E E ø." ø." ø.9" HES HES Orer by catalog number. -p
17 < > COLLET AMERICAN ROTARY TOOLS CO. CHA Group ø.9"." : K- : CHN-A CHC Group." ispee E E E E ø." ø." ø.9" HES HES A- A- A- A- A- ABS- BM-9 BM- BM-F BM- BM-FL BM-FR BM S-9 S- S- NR-S NRA- NR- PS-/ PSS- PSA-/ PSAS- P-A BANTAM PLANET PLANET PLANET S EM-S EM-S E-A NRR-QC HES RA RA RA RA RA RA RA RA RA9 9 RA RA RA RA 9 9 RA RA RA RA 9 RA RA9 RA 99 RA RA RA RA9 99 CHB Group CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-.9 ø.9 CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-.9 ø.9 CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-.9 ø.9 CHA-. ø. CHA-.AA ø. CHA-. ø. CHA-. ø/" CHA-.AA ø/" CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-. ø. CHA-.9 ø.9 CHA-. ø. CHA-.AA ø.." NRR- NRR- NR- ATC CHB-. CHB-. CHB-. CHB-. ø. ø. ø/" ø IC- KC- EIC- EKC- IC-E KC-E CHF Group NR CHG Group." HG- NR- EHG- NR- RA RA RA RA RA RA RA RA RA9 RA9 RA9 RA RA CHH Group CHC-. CHC-. CHC-. CHC-.." CHF-. CHF-.." ø. ø. ø. ø/" ø. ø/" IH- IR- EHL- EHR- EHR- VH-E RE9 9 RE9 RE RE 9 RE9 RE CHG-. CHG-. CHG-. CHG-. CHG-. CHG-. CHG-. CHG-. CHG-. CHG-. CHG-. CHG-. CHG-. CHH-. CHH-. CHH-. CHH-. CHH-. CHH-. CHH-. CHH-. ø. ø. ø. ø. ø. ø. ø. ø/" ø. ø. ø. ø. ø/" ø. ø. ø. ø. ø. ø. ø. ø/" p
18 AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - CHK Group ø.".9" : K- : CHN-B PL9 PL 9 PL 9 CHK-.9 CHK-. CHK-.AA CHK-. CHK-.AA ø.9 ø. ø. ø/" ø/" NR- ENR- ABS-P ABS- AMX- AMX- (/ Ratio) AMX- (/ Ratio) EM-S E-K E- E- E- E- E--J E--J E- E-K E-K EF-K EMR-K - S- SH- T- ST- NR- NR- NR-H NR- NR-H NR- NR-P NR- NR-S NR-E NR-E NRAF- NRL- NRL-E NRR-QC P-K PMR-K P-K PS-/ PSS- PSA-9/ PSAS-9 PSA-/ PSAS- PSA-/ PSAS- RAS- RAS-E RAX-E RAX-E RAS- RAS-H FG-S PLANET HES High precision type PL 9 PL PL PL9 PL9 PL99 PL PL9 PL PL9 PL9 PL9 PL9 99 PL PL PL 9 PL9 PL PL PL PL PL9 PL9 PL9 99 PL PL 99 9 PL PL PL PL 9 PL 99 PL 999 PL 9 PL PL PL 9 PL PL 9 99 PL PL PL 9 PL PL PL9 9 9 CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-.9 ø.9 CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-.9 ø.9 CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-.9 ø.9 CHK-. ø. CHK-.AA ø. CHK-. ø. CHK-. ø/" CHK-.AA ø/" CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-.9 ø.9 CHK-. ø. CHK-.AA ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-.9 ø.9 CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø. CHK-. ø CHL Group ø.9".9" : CHN-L AMX- (/ /9 Ratio) PSA-/ PSAS- PSA-/ PSAS- PSA-/ PSAS CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. CHL-. ø. ø. ø. ø. ø. ø. ø/" ø. ø. ø. ø. ø. ø. ø/" ø. ø. ø. ø inicates Han Griner use inicates Machine Spinle use Orer by catalog number. ispee E E E E ø." ø." ø.9" HES HES -p
19 < > COLLET AMERICAN ROTARY TOOLS CO. CHM Group." CHS Group.9" ispee E E E E MH- BMH- NR- NR- AMH- AMH- RE RE RE9 RE RE9 RE CHM-. CHM-. CHM-. CHM-. CHM-. CHM-. CHP Group ENR- ATC NRR- NR-E ATC AS AS AS." CHP-. CHP-. CHP-. ø. ø. ø. ø. ø. ø/" ø. ø. ø/" ERA-, 9 Angle Type SERIES RA- RA-E RA- RA-H NK 99 NK NK9 NK NK NK NK NK NK9 NK NK CHS-. CHS-.9 CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-.9 CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-. CHS-.9 CHS-. CHS-. ø. ø.9 ø. ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø. ø. ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø. ø/" ø." ø." ø.9" HES HES CHR Group." NR-E ATC NR-E ATC NR- ATC CHR-. CHR-. CHR-. CHR-. CHR-. CHR-. ø. ø. ø/" ø. ø. ø/" CHSS Group E-S P-S " CHSS-. CHSS-. CHSS-. CHSS-. CHSS-. CHSS-. CHSS-. ø. ø. ø. ø. ø. ø. ø/" 9.. -p
20 AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - CH Group." : K- : CHN- CH Group.9" ABS- PLANET BANTAM A-R A-L A- A-R A-L A-R A-L TN- NR- FG-S PL PL PL PL PL PL9 PL 9 9 PL9 PL9 9 PL9 99 PL9 9 PL PL 9 PL PL 99 PL9 9 PL 9 9 PL PL PL PL 9 99 PL 9 9 PL PL9 PL PL PL PL CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-. CH-. ø. ø. ø. ø. ø. ø. ø.9 ø. ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø. ø. ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø. ø. ø/" ø. ø. ø. ø. ø. ø. ø. ø.9 ø. ø. ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø. ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø. ø/" CH Group PL9 99 PL PL PL PL PL PL PL PL PL9 99 PL 9 PL 9 PL PL PL PL 9 PL 99 PL PL ø." CH- ø." PL."." CH-. CH-. CH-. CH-.9 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-. CH-.9 CH-. CH-. CH Group " CH-. CH-. CH-. CH-. CH-. CH-. CH- ø. ø/". RA- RA-E RA- RA-H ø. ø.9 ø. ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø. ø. ø. ø. ø. ø. ø. ø. ø. ø. ø.9 ø. ø/" PLANET ø/" B- B-RA B- B-RA ø. ø/" ø. ø. ø/" ø... ispee E E E E ø." ø." ø.9" HES HES inicates Han Griner use inicates Machine Spinle use Orer by catalog number. -p
21 < > COLLET & COLLET NUT AMERICAN ROTARY TOOLS CO. ER-UP / AR-AA (ø.") (.") : CHN-E Collet Nut CHN-A." ø." : CHA ispee E E E E ø." ø." ø.9" HES HES AMX- (/ /9 Ratio) PSA-/ PSAS- K- MFC-S RE K- MFC-M RE ø." ø."." K- ø/"." K- ø/".. NKM Group (NK Micron Collet) IG- Straight Type ER-UP AR-AA." NKM-. NKM-. NKM-. REGO-FIX ER-UP ALPS TOOL AR-AA ø. ø. ø/" Available in the market : CHN-. BM-9 BM- BM-F BM- BM-FR BM-FL BM- EM-S EM-S E-A HES S-9 S- S- NR-S NRR-QC P-A S.9" Collet Nut CHN-E.9" Collet Nut CHN-L.9" ø." ø.9" 9. Collet Nut CHN-B (For E-/K) E- E-K AS AMX- (/ /9 Ratio) PSA-/ PSAS- PS9 : CHK. : ER-UP AR-AA. : CHL AMX- (/ /9 Ratio) PSA-/ PSAS- PSA-/ PSAS- PSA-/ PSAS- CHN-A Collet Nut CHN-AA." ø." A-/ A- 9 CHN-AA CHN-B CHN-E CHA CHA CHK ER-UP AR-AA : CHA. PS CHN-L CHL. -p
22 < > COLLET NUT AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - Collet Nut CHN-." ø.9" : NKM Group Collet Nut K-.9" ø." : CHK IG- Straight Type Collet Nut CHN-." Collet Nut K-." ø.".. : CH PLANET BANTAM A-R A-L A-." ø." Collet Nut K- ø." : CH NR- A-R A-L A-R A-L TN- FG-S AS CHN- Collet Nut CHN- CH B- B-RA B- B-RA PL. NRA- NR- ABS- PS-/ PSS- PSA-/ PSAS- S BANTAM PLANET PLANET A- A- -9." ø.9" CHN- CHN- K- CH NKM Group CH 9. : CH : CHA EM-S E-K E- E--J E- E--J E-K EF-K EMR-K NR-E NR-E NRL-E RAS- RAS-E RAS- RAS-H RAX-E RAX-E NR- NR-H NR- NR-H NR- NR-H NR- NRL- NR- NR-P NR- NR-S NRR-QC - S- T- ST- S- SH- ABS- AMX- AMX- (/ Ratio) AMX- (/ Ratio) P-K PMR-K P-K PS-/ PSS- PSA-9/ PSAS-9 PSA-/ PSAS- PSA-/ PSAS- ABS-P HES PLANET FG-S RA9 K- CHK Collet Nut K-A NRAF-.9" ø." K-A CHK. : CHK. ispee E E E E ø." ø." ø.9" HES HES RA K- CHA. inicates Han Griner use inicates Machine Spinle use Orer by catalog number. -p
23 < > SPECIAL ARBOR AMERICAN ROTARY TOOLS CO. ispee E E E E ø." ø." ø.9" HES HES Special Drill Chuck Arbor Prouct."."." Description Special Drill Chuck Arbor For Drill Chuck Jacob's Taper No. Run-out Accuracy : Within. mm Special Drill Chuck Arbor For Drill Chuck Jacob's Taper No. Run-out Accuracy : Within. mm Special Drill Chuck Arbor For Drill Chuck Jacob's Taper No. Run-out Accuracy : Within. mm Special Metal Saw Arbor Prouct Description.99" Special Metal Saw Arbor Dimensions of Metal Saw ø (I.D) x (O.D.) Run-out Accuracy : Within. mm." Special Metal Saw Arbor Dimensions of Metal Saw ø (I.D) x (O.D.) Run-out Accuracy : Within. mm.9" Special Metal Saw Arbor Dimensions of Metal Saw ø (I.D) x (O.D.) Run-out Accuracy : Within. mm." Special Metal Saw Arbor Dimensions of Metal Saw ø (I.D) x (O.D.) Run-out Accuracy : Within. mm For right han (cw) rotation only. AS AS AS AS AS AS K ASA AS 9 DCH-JA DCH-JK DCH-JN KCH-A (.) KCH-A (.) KCH-A (.) KCH-N (.) KCH-N (.) KCH-N (.) KCH- (.) KCH- (.) KCH- (.) KCH- (.) KCH- (.) KCH- (.) KCH- (.) S-9 S- S- PS-/ PSS- PSA-/ PSAS- NR- S ENR- RAS- RAS-E RAX-E RAX-E RAS- RAS-H NR-S NR- NR- NR- NR-P NR-E NR-E NR- NR-H NR- NR-H - S-9 ST- TN- S- SH- E-K E- E- E- E- E-K E- E-K EMR-K ABS-P HES PS PSA PSA PSA NRL- NRL-E P-K PMR-K P-K NR- S-9 S- S- PS-/ PSS- PSA-/ PSAS- NR- TN- NR- RA- RA-E RA- RA-H ENR- RAS- RAS-E RAX-E RAX-E RAS- RAS-H NR-S NR- NR- NR- NR-P NR-E NR-E NR- NR-H NR- NR-H - S-9 ST- TN- S- SH- E-K E- E- E- E- E-K EF-K E- E-K EMR-K ABS-P PS PSA PSA PSA NRL- NRL-E P-K PMR-K P-K... For right han (cw) rotation only p
24 AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - Grinstone Arbor ø." Prouct.".9" ø."." ø.".9" ø."."."." Description Grinstone Arbor (for Cup Wheel & Rubber Pa) Grinstone Arbor Run-out Accuracy : Within. mm For Grinstone with ø. mm I.D. Grinstone Arbor Run-out Accuracy : Within. mm For Grinstone with ø. mm I.D. Grinstone Arbor Run-out Accuracy : Within. mm For Grinstone with ø. mm I.D. PY-[][]D (Diamon) BY-[][]B (CBN) PY-[][]L (Blank) Grining Arbor for Deep Hole For right han (cw) rotation only. NK AS9 AS AS AS NCH- AGM- AGM-A AGM- ø. mm~ø. mm AX- 9. AMH- AMH- NR- NR- S S-9 S- S- PS-/ PSS- PSA-/ PSAS- NR- S ENR- RAS- RAS-E RAX-E RAX-E RAS- RAS-H NR-S NR- NR- NR- NR-P NR-E NR-E NR- NR-H NR- NR-H - S-9 ST- TN- S- SH- E-K E- E- E- E- E-K EF-K E- E-K EMR-K ABS-P HES PS PSA PSA PSA NRL- NRL-E P-K PMR-K P-K PLANET NR-... Quote upon request. ispee E E E E ø." ø." ø.9" HES HES inicates Han Griner use inicates Machine Spinle use Orer by catalog number. -p
25 < > GRIP RING AMERICAN ROTARY TOOLS CO. GRIP RING The Grip Ring is an ajustable position split type flange for mm an mm spinles. The Grip Ring can easily mounte or remove from any CNC machine or specialty machine tool block or tool post. Eliminates the chance of over tightening an amaging the spinle in the sleeve uring installation. ispee E E Caution Do not remove the Lock Bolt. If the Lock Bolt is remove, the Washer insie may move. Once the Washer is move, it may make it impossible to attach the Lock Bolt. Do not remove the spinle while the Grip Ring is attache to the machines' holer. This may cause eformation an / or amage to the Grip Ring. No. GRIP RING GR- E E Washer Lock Bolt (M) X Screw hole for removal (M) ø." ø." ø.9" HES ø." Section X-X GR- X.".9" ømm () ø." Stanar Equipment Accessories Mounting Bolt (Accessories) (MxL) Mounting Bolt (Mx) : pcs.. HES No. GRIP RING GR- Washer Lock Bolt (M) X Screw hole for removal (M) (.") ø." (.") Section X-X X."." ømm (ø.") ø." Stanar Equipment Accessories Mounting Bolt (Accessories) (MxL) GR- Mounting Bolt (Mx) : pcs.. -p
26 < > SPLIT BUSHING AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - Split Bushing : Bushings to allow smaller ia. spinles to be mounte in larger ia. holers Description I.D. O.D. Length RB-.x RBS-.x (ø. mm) (ø. mm) (ø mm) (ø mm) mm RA-. NR- NR- mm NR- AMH-. RA- RAS- RB-.x. mm RA- (ø. mm) (ø. mm). RBS-.x. (ø. mm) (ø. mm) NR- NR- mm NR- AMH-. RA- RAS- ispee E RB-x RB-x. RB-x RB-x 9 RB-x. RB-x (ø mm) (ø mm) (ø mm) (ø mm) (ø mm) (ø mm) ø.9" (ø mm) (ø. mm) ø." (ø mm) (ø mm) (ø. mm) ø." (ø mm) EM-S mm S S. S EM-S mm S S. S EM-S mm S S. S EM-S mm S S. S EM-S mm S S. S NR-S mm. NR-E NR-E E E E ø." ø." ø.9" RB-x (ø mm) ø." (ø mm) mm NR-S NR-E NR-E. HES HES RB-xxL RB-x.xL ø." (ø mm) ø." (ø mm) (ø mm) (ø. mm). mm. mm BM- BM-FL BM-FR BM- BM-FL BM-FR Note : After inserting spinle into bushing, verify the O.D. measurement vs. the machine holer I.D... inicates Han Griner use inicates Machine Spinle use Orer by catalog number. -p9
BRUSHLESS MOTOR & SPINDLE E3000 SERIES Modular Type ø1.18"(ø30 mm)
BRUSHLESS MOTOR & SPINDLE SERIES Moular Type ø."(ø mm),~, min- (rpm) Maximum Output W Motor spee is isplaye accurately on the front panel. Auto or Manual Control Moes. Can be installe on Special-Purpose
More informationE3000 Series. Electric System. ø1.18", ø0.98", ø0.79" ø1.18", ø1.0", ø0.98", ø0.897" ø1.97", ø1.18" 7 TECHNICAL DATA 8 APPLICATION EXAMPLES
NC / CNC LATHE & AUTOTION SOLUTIONS Series Electric System,~, min - (rpm) One Piece Type Outsie Diameter Moular Type Outsie Diameter,, ø.9" (ø,, mm),,, (ø,.,,. mm) ispee / / -,rpm E ø." ø.9" ø." ø.9",~,
More informationAir Turbine ABT TECHNICAL DATA 8 APPLICATION EXAMPLES. Features. AIR BEARING SPINDLE ABT Series. 100,000 min -1 (rpm) Output : 88W.
AIR BEARING SPINDLE Series Turbine -000 00,000 min - (rpm) Output : W Outsie Diameter ø."(ø0 mm) Features Principle of Bearing Nozzle ispee - Moular - 0,000rpm ø0." Xpee Series Connection
More informationE3000 SERIES CONTROL UNIT
ispeed E E BRUSHLESS MOTOR & SPINDLE SERIES Modular Type (ø mm),~, min- (rpm) Maximum Output W Motor speed is displayed accurately on the front panel. Auto or Manual Control Modes. Can be installed on
More informationE2530 SERIES E2550 SERIES E3000 SERIES E3200 SERIES E4000 SERIES 5 AIR LINE KIT 7 TECHNICAL DATA 8 APPLICATION EXAMPLES
ispeed E0 SERIES,000~0,000 min - (rpm) Output W Outside Diameter (ø. mm) The E0 Series is capable of up to 0,000 min - (rpm) and employs a high-speed, ultra-quiet brushless motor. High-performance system
More information* Please mention "Code Number" upon your order.
BRUSHLESS MOTOR & SPINDLE FOR Series Please mention " Number" upon your orer. '...A PRK25E Ver. E25 SERIES Ultra Precision Excellent urability an high rigiity are obtaine using a highspee brushless motor.
More informationMicro-Grinder AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 250 WEST DUARTE ROAD, #E MONROVIA, CA USA
Micro-Griner Air Driven 0,000 min - (rpm) 0,000 min - (rpm) PRESTO 0,000 min - (rpm) MODULAR TYPE HIGH TORQUE AIR GRINDER High torque air motor assemble with special vane mechanism. Two types of air motors
More informationULTRA-PRECISION BRUSHLESS MICRO-GRINDER ESPERT 500
ULTRA-PRECISION BRUSHLESS MICRO-GRINDER 00 Evolutionary New Design High-Performance Brushless Micro Griner. Ultra-Precision Micro-Griner The Espert 00 brushless motor takes motor technology to an even
More informationMicro-Grinder AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 250 WEST DUARTE ROAD, #E MONROVIA, CA USA
Micro-Griner Air Driven 0,000 min - (rpm) 0,000 min - (rpm) PRESTO 0,000 min - (rpm) MODULAR TYPE HIGH TORQUE AIR GRINDER High torque air motor assemble with special vane mechanism. Two types of air motors
More informationHES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE
ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output
More informationE3000 Ultra-high-Speed & Super-Precision
E Ultra-high-Speed & Super-Precision www.nakanishi-inc.com NAKANISHI INC. and design are subject to change without notice. PR-K7E Ver. '...I Headquarters Factory 7 Shimohinata, Kanuma, Tochigi -, Japan
More informationRing Type. Lever Type. Straight Type. Torque Type. Long Type. 90 Mini Angle Type. 90 Mini Angle Type (Very Small Head) 90 Angle Type.
ULTRA-PRECISION HIGH TORQUE AIR GRINDER System Chart Model Price Attachment ispeed E0 E0 E00 E000 RE00 IR-0 9.00 RE0 IH-00 9.00 IG-00.00 RE0 HG-00 9.00,000 min - (rpm) Max. ( ) RE0 BMH-00 9.00 RE0 MFC-00S.00,000
More informationESPERT ROTUS ECOMO IMPULSE PRESTO II SHEENUS
HAND WORK E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0 HAND WORK SOLUTIONS Micro-Grinder Electrically Driven Emax EVOlution,000~0,000 min - (rpm) ULTRA-PRECISION BRUSHLESS MICRO-GRINDER Digital display
More informationAMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 250 WEST DUARTE ROAD, #E MONROVIA, CA USA
AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 0 WEST DUARTE ROAD, #E MONROVIA, CA USA 90- Tel: () - Fax: () -00 Toll Free USA Tel: (00) - Fax: (00) -0 Email: info@artcotools.com HAND WORK SOLUTIONS Micro-Grinder
More informationKemet MICRO-GRINDER/ DEBURRER FOR PRECISION ENGINEERS
Kemet MICRO-GRINDER/ DEBURRER FOR PRECISION ENGINEERS Nakanishi (NSK) Polishing Machines Nakanishi (NSK) Espert 500 A precision power hand tool system with a wide range of attachments suitable for grinding,
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More informationHAND WORK 5 AIR LINE KIT 6 PARTS 7 TECHNICAL DATA 8 APPLICATION EXAMPLES. 1-p1-19_EmaxEVO_A_1201_1-p1-19_EmaxEVO_A_1201.qxd 2/3/12 12:53 PM Page 1
-p-9 A_0_-p-9 A_0.qxd // : PM Page HAND WORK E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0 -p-9 A_0_-p-9 A_0.qxd // : PM Page -p HAND WORK SOLUTIONS Micro-Grinder Electrically Driven Emax EVOlution,000~0,000
More informationManual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
More informationTension / Compression tap chucks for tapping cycles that are not synchronized
Tension / Compression tap chucks for tapping cycles that are not synchronize For tapping applications on CNC machines where the revolutions per minute an fee rate are not synchronize to the tap pitch,
More informationOn the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used
V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow
More informationPinzBOHR High Precision Boring Tools
PinzBOHR High Precision Boring Tools What to expect from our boring tools. Our European mae boring tools have been proven worl wie to be among the best you can buy. Machinists love our boring tools because
More informationE3000 CONTROLLER. OPERATION MANUAL : P1 - P44 / English : P47 - P95 OM-K
E3000 CONTROLLER OPERATION MANUAL : P1 - P44 / English : P47 - P95 OM-K0438 002 Thank you for purchasing the E3000 Ultra-Precision, High-Speed spindle system. The E3000 system was designed for use on CNC
More informationLive Centers. High Speed Steel Main Line
ive enters igh Spee Steel Main ine MIN-IN: Reliable top of the range live center for N an conventional lathes, an grining machines With over-pressure security through isc springs oy an spinle moels: SM
More informationDeep groove ball bearings
Deep groove ball bearings 6200-2 J/C3 HC5 GJN Nomenclature 1 2 3 4 5 1. Seals, shiels & snap rings: 2. Cage esigns: 4. Suffix: RSH RS2 RSL R 2RSH 2RS2 2RSL 2R 2 NR Contact seal of synthetic rubber (NBR)
More informationThe Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use
C-ROM Sizing Software ETP Keyless Shaft Mount Connections The Ieal ocking evices For Shaft-to-Hub Connections. ETP Connections are ieal for positioning an locking shaft components in a system. They are
More informationPoly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
More informationTechnical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
More informationTapping attachments Tap chucks Cutting fluids
Tapping attachments Tap chucks Cutting fluis Quality, reliability an goo service are what TAPMATIC stans for Since its establishment in 1952, Tapmatic has manufacture tapping attachments of the highest
More informationROLLER CHAIN SPROCKETS
ROLLER CHAIN PROCKE ypes an Materials Correct engagement between roller chain an sprocket is require for smooth transmission of roller chain. Appropriate selection of number of teeth (spee ratio), center-to-center
More informationHigh-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
More informationApril 2017 TOOLING FOR MULTUS U3000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 MULTUS U3000/U4000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
More informationJuly 2017 TOOLING FOR GENOS L300/L3000 BMT. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR July 2017 GENOS L300/L3000 BMT www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationBuilt for Speed. Pinzbohr High Precision Boring Tools. Pinzbohr Modular Boring System. BohrSTAR Boring Kits. Rough and Finish Boring Heads
Pinzbohr High Precision Boring Tools BohrSTAR Boring Kits Rough an Finish Boring Heas Boring Hea Toolholers Carbie an HSS Boring Bars Built for Spee. BohrSTAR High Precision Kits Range 0.314" up to 8.27"(8mm
More informationAlberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30
350 5 TURBODRILL/TURBOFLEX 139 79 53 11 184 0 10 Ø25 Ø80 86 ER40 3/30 131 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com TURBODRILL &
More informationOctober 2017 TOOLING FOR LB2000/LB3000 M/MY/MYW. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR October 2017 LB2000/LB3000 M/MY/MYW www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
More informationRexnord Tollok Locking Assemblies
Tollok Catalog ownloa the most up-to-ate version at www.rexnor.com/ocumentation Rexnor Tollok Locking Assemblies Why Choose Rexnor Tollok Locking Assemblies? Why Choose Rexnor? When it comes to proviing
More informationToolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
More informationInformation. Plate Cylinder Type C(L)KU32. HIGH type. (Magnetic field resistant auto switch) New. New. New Newly added guide pins
Information Pin lamp yliners ompact yliner Type (L)G32 Magnetic fiel resistant auto switch mounting type LOW type (-X81) HIGH type (-X82) Plate yliner Type (L)U32 Magnetic fiel resistant auto switch mounting
More informationAugust 2018 ONLY FOR MULTUS U3000/U4000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA August 2018 MULTUS U3000/U4000/U5000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the
More informationE2280 CONTROLLER. OPERATION MANUAL : P1-P55/ English : P57- P114/ French : P117- P121 OM-K0681
E2280 CONTROLLER OPERATION MANUAL : P1-P55/ English : P57- P114/ French : P117- P121 OM-K0681 Thank you for purchasing the E2280 Ultra-Precision, High-Speed Spindle System. The E2280 system was designed
More informationMetal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit
HSS-E IN 338 cobalt 72-75 HSS IN 338 groun 76-79 HSS IN 338 stanar 80-84 HSS IN 338 stanar, shank reuce 85 HSS IN 340 86 HSS IN 1869 87 HSS hollow section rill bit / facae rill bit 88 HSS IN 345 89-90
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationShaft Diameter d 1 3 /16 01 B /4 01 B /16 01 B /2 01 B /16 01E B /4 01E B
Lubrication Fittings Lubrication points are tappe 1/4 NPT or 1/8 NPT epening on size an series, an fitte with nipples for grease lubrication as stanar. nipples may be remove an replace with other fittings
More informationNSK Ball Screws for Standard Stock
NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar stock series assures immeiate elivery. New! Patent Pening BSS Series next-generation
More informationRod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread
Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel
More informationApril 2017 TOOLING FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory of lathe
More informationInventory Article No. Precision mm 0.01mm 35um 386g. Precision A
DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS
More informationMETAL DRILL BITS STRONGER THAN STEEL HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
STRONGER THAN STEEL RILL 307 HSS-E IN 338 cobalt 76 79 311 HSS TIN IN 338 steel rill bit 80 81 302 HSS IN 338, groun, split point 82 85 300 HSS IN 338, stanar 86 90 300 HSS IN 338, stanar, shank reuce
More informationJuly 2018 ONLY FOR LT2000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT2000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationQuickFlex. Designed for. The new quick change system for high performance and precision. Minimal investment, maximal expandability.
The new quick change system for high performance an precision. Minimal investment, maximal expanability. for MAZAK Quick Turn Smart 200M/300M/350M Designe for 1 The perfect combination: ER collet chuck
More informationJuly 2018 ONLY FOR LU3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LU3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest
More informationHigh Pressure Valve Series for Hydrogen Stations
High Pressure Valve Series for Hyrogen Stations Ball Valves Manual Valve Automatic Valve Specifications of Ball Valves KITZ CESTEC -Series Maximum Allowable Pressure 103 MPa: 85 C
More informationJuly 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationISO 9001:2008 LOCKING ASSEMBLIES SHRINK DISCS KEYLESS RIGID COUPLINGS
OCKING ASSEMBIES SHRINK DISCS KEYESS RIGID COUPINGS Introuction ISO 9001:2008 CIMAX Metal Proucts Company & MAV S.p.A. A Unique Partnership In June 2011, CIMAX entere an exclusive agreement with MAV S.p.A.
More informationIncremental encoders Insulated through hollow shaft ø inch pulses per revolution programmable (interpolated system)
Features HS35P with insulate hollow shaft Robust inustrial encoer up to IP 67 protection Highly versatile fully programmable encoer Interchangeable bore size(s) using metal inserts Insulating sleeve to
More informationFOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
More informationCollet Chucks and Collets
ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16
More informationTriple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
More informationStatic & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationQuick-change adapters, positive drive inch sizes
P Quick-change aapters, positive rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationMulti-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
More informationNSK Ball Screws for Standard Stock
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228--21, факс (495) 223-371 NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar
More informationE2EM-X4X1 2M * E2EM-X4X2 2M Shielded E2EM-X8X1 2M * E2EM-X8X2 2M. M30 15 mm E2EM-X15C1 2M E2EM-X15C2 2M. M18 16 mm E2EM-X16MX1 2M E2EM-X16MX2 2M
Long-istance Proximity Sensor EEM CSM_EEM_DS_E_6_ Long-istance Proximity Sensor Long-istance etection at up to mm enables secure mounting with reuce problems ue to workpiece collisions. No polarity for
More informationConstant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM <1.4HP / 1.04kW
Constant High Speed and Torque Motor Mount Series 25,000RPM - 65,000RPM
More information5 Bearing Preload and Rigidity
Technology>Precision>Innovation outer ring. 2)The contact surface pressure on the raceway surface reaches 4200Mpa or 428kgf/mm2 in either the inner or outer ring raceway. The allowable axial loa for each
More informationCAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
More informationSTROKE BUSH SLIDE ROTARY BUSH STROKE BUSH
STROKE BUSH STROKE BUSH STRUCTURE AN AVANTAGES E- AOWABE SPEE FOR COMBINE ROTATION AN STROKE MOTION E- RATE OA AN RATE IFE E- FIT E- USE AN HANING PRECAUTIONS E- IMENSION TABE E- SRE SERIES STRUCTURE AN
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationAngular contact ball bearings
Angular contact ball bearings 7200 BE CB Y HC5 Nomenclature 1 2 3 4 1. esign: 2. Clearance: 3. Cage esigns: B BE A E NR N2 2Z 2RS1 40 contact angle 40 contact angle, high capacity, all ISO corners Conra
More informationBLDC-DZZ Spindle control Unit OPERATION MANUAL. Release: REV-01. Contents
W Windward BLDC-DZZ Spindle control Unit OPERATION MANUAL 1 Release: 2013-3-23 Contents 1 Cautions For Handling and operation.p3 2 Features.P4 3 Specifications.P5 4 CONTROL PANEL FEATURES.P6 5 Changing
More informationForged Steel Valves. Gate / Globe / Check. DHV Industries, Inc. DHV Valve Company Inc.
3451 Pegasus Drive Bakersfiel, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@hvinustries.com Website: www.hvinustries.com DHV Valve Company Inc.
More informationSplit pillow blocks
Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with
More informationSine encoders Insulated through hollow shaft ø inch sinewave cycles per turn
Features Rugge esign up to IP 67 protection Shock resistant up to 200 g s Insulating insert to prevent high shaft currents from amaging bearings Wie range voltage supply 4.75...30 VDC Precision 60 arc-secons
More informationTable of Contents. To place an order, please contact: Keith Clendenin; cell ph. (860)
Rev. Date 5/10/2016 Table of Contents Standard Products...3 Back Working Drill Holders...4 Bar Feed Brackets...5 Reducer Bushings...6 Chucker Kits...8 Coolant/Air Blast Manifolds...9 Thru-Coolant ER Collet
More informationBMT 65 TOOLING BENZTOOLING.COM
BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s
More informationPipe and Flange Protection
Pipe an Flange Protection Pipe Caps 78-82 Pipe Plugs 82-83 Flange Protection 84-89 77 Protect! Pipe an Flange Protection Moss offer a wie range of Plastic Protection Proucts for pipes an flanges. Our range
More informationNAKAMURA TOME LIVE TOOLING
NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000
More informationFULL COMPLEMENT NEEDLE BEARINGS
FULL OMPLEMENT NEELE EARINGS Technical features Full complement neele bearings These bearings are available with or without an inner ring from 12 bore size. Stanar complete bearings type NA have an inner
More informationBMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
More informationFloating Holder. Radial float and angular float mechanisms compensate for misalignment between reamer and pre-drilled hole.
Specialize Applications ing Holer Specialize Relate Stub Holer Tapping Chuck Tap Aapter Aapter Enmill Chuck Straight Chuck ing Holer High precision reaming with special purpose machines an transfer lines.
More informationCollet Chuck manual 08/2010
Collet Chuck manual 08/2010 Contents: FNP manual collet chuck...4/5 draw-back type W20 / W25 / 5C / B32 / 386E FNP manual collet chuck...6/7 draw-back type B45 FNH manual collet chuck...8/9 draw-back
More informationFP-4000 Series FLOAT LEVEL SWITCH OUTLINE MAIN APPLICATIONS STANDARD SPECIFICATION
FOR MULTIPOINT LEVEL ALARM ETECTION BY ONE UNIT FP- Series FLOAT LEVEL SWITC OUTLINE The FP- series is a float level switch, which is installe through the tank nozzle on tanks an/or pits. Level alarm etection
More informationHepcoMotion. Ball Bushings Range.
HepcoMotion Ball Bushings Range www.hepcomotion.com Contents Super Ball Bushing - European Stanar SBE - Super European Close SBEO - Super European Open CS - Super European Pillow Block Close CSO - Super
More informationPRODUCTS FOR THE HYDRAULICS INDUSTRY
PROUCTS FOR THE HYRAULICS INUSTRY SPIRALGUAR SPIRALGUAR High Performance Hose an Cable Protection How to calculate quantity: Outsie iameter of hose Length (m) of hose Insie iameter of Spiralguar X to be
More informationSpecial Applications Require Special Tools
Index Routers.................. 102-103 Tappers..................... 104 Clinch Nut Tools.............. 106 Rivet Shavers................ 107 Skin Clamp Runners........... 108 Saws................... 109-110
More information*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
More informationDOOSAN LIVE & STATIC TOOLING
DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800
More informationyour reliable partner EAS -Compact K.490.V16.EN
ES -Compact K.490.V16.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one of the most traitional an yet most innovative
More informationISO P4 SERIES PRECISION MACHINE TOOL SPINDLE BALL BEARINGS
ISO P4 SERIES PREISION MAHINE TOOL SPINLE BALL BEARINGS MORE HOIE. ENHANE ONVENIENE AN FLEXIBILITY. 71900(E)-...-P4S Series 2(3)MM9300WI Series Number 15 /2 (3) or 25 E/3 (4) Bore O.. Tolerance: 0 to -µm
More informationAccessory pack includes: A. Auxiliary tool x1 B. Spindle bolt x1 C. Set screw x2 D. Seal washer x1 E. Tall cable guide x1 D. E.
CK-5000T Metropolis Patterson Transmission Crankset Installation Instructions Publishe July, 2011. ZSxxx.v0 Full Spee Ahea Installation Instructions Congratulations on your Full Spee Ahea prouct. Please
More informationHepcoMotion. Shaft precision steel and aluminium shaft
HepcoMotion Shaft precision steel an aluminium shaft Introucing the HepcoMotion Precision Shaft Correct Shaft selection is vital if maximum performance is to be achieve from your linear system. Hepco Precision
More informationProduct Range. Butterfly Valve Type
Prouct Range Butterfly Valve Type 567 ist of Abbreviations ANSI American National Stanar Institute ASTM American Society for Testing an Materials BS British Stanar IN eutsche Inustrie-Normen ISO International
More informationA OM-K0572E 003
2015..04 005 A OM-K0572E 003 S Cautions for handling and operation... P.1 S Component Names... P.3 S Setting Up the Control Unit... P.4 S Operating Procedures... P.5 S Memory-Speed Function, FIXPEED...
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationContents. ECCO single-phase. 1. Scissors assy Thread guide and eccentric drive Tucker plate assy
Contents Contents 1. Scissors assy.... 2-3 2. Thread guide and eccentric drive... 2-5 3. Tucker plate assy.... 2-7 4. Bobbin table with setting elements... 2-9 5. Secondary shaft with ejection elements...
More informationFAX FAX
2 seals on eman HERCULES SEALS ON EMAN provies a wie selection of custom, cost effective sealing solutions using avance rapi-prototype technology. The programmable CNC prouction cell can manufacture both
More information