QuickFlex. Designed for. The new quick change system for high performance and precision. Minimal investment, maximal expandability.
|
|
|
- Audra Hart
- 5 years ago
- Views:
Transcription
1 The new quick change system for high performance an precision. Minimal investment, maximal expanability. for MAZAK Quick Turn Smart 200M/300M/350M Designe for
2 1 The perfect combination: ER collet chuck an quick change system in one toolholer Toolholer chuck Collet Collet nut aapter One-han wrench (patent pening) Threa for aapter an collet nut Short taper for raial centering an axial support of the aapter Taper of the ER collet chuck Polygonal torque transmission for aapter Raial bening support of the aapter for high stiffness uner loa
3 Permanent accuracy of the run-out is guarantee by two inepenent taper connections. With ER collet With mill arbor aapter mm mm 0.01 mm 30 mm Quick an safe tool change with the new an one-han wrench (patent pening). 3
4 Straight rill/milling unit (EC) with external coolant supply Orer wrenches separately! Item No. Machine moel Clamping system Dimensions/Data One- Size e a L1 L2 b RPM han wrench Spanner wrench QTS-200M ER-32QF : QTS-300M M Nm Ratio n1:n ER-40QF : (IC) with internal + external coolant supply Max. coolant pressure = 1160 PSI (80 bar) Orer wrenches separately! Item No. Machine moel Clamping system Dimensions/Data One- Size e a L1 L2 b RPM Only use filtere coolant flui ( particle size = 100 µm). Do not run without coolant. Do not use for machining abrasive materials such as cast iron, etc. han wrench Spanner wrench QTS-200M ER-32QF : QTS-300M M Nm Ratio n1:n ER-40QF :
5 Right angle rill/milling unit (EC) with external coolant supply Orer wrenches separately! Size e a L1 L2 H3 b RPM Item No. Machine moel Clamping system Dimensions/Data Onehan wrench Spanner wrench QTS-200M ER-32QF : QTS-200M ER-25QF : QTS-200M ER-32QF : QTS-300M QTS-300M QTS-300M M Nm Ratio n1:n ER-40QF : ER-32QF : ER-40QF : (IC) with internal + external coolant supply Max. coolant pressure = 1160 PSI (80 bar) Orer wrenches separately! Size e a L1 L2 H3 b RPM Only use filtere coolant flui ( particle size = 100 µm). Do not run without coolant. Do not use for machining abrasive materials such as cast iron, etc. Item No. Machine moel Clamping system Dimensions/Data Onehan wrench Spanner wrench QTS-200M ER-32QF : QTS-200M ER-25QF : QTS-200M ER-32QF : QTS-300M QTS-300M QTS-300M M Nm Ratio n1:n ER-40QF : ER-32QF : ER-40QF :
6 Ajustable angle rill/milling unit for ER style collet (EC) with external coolant supply Orer wrenches separately! Item No. Machine moel Clamping system Dimensions/Data Size e a L1 L2 H3 RPM Wrench QTS-200M ER : QTS-200M ER : QTS-300M QTS-300M M Nm Ratio n1:n2 ER : ER 16 0, : (IC) with internal + external coolant supply Max. coolant pressure = 1160 PSI (80 bar) Orer wrenches separately! Item No. Machine moel Clamping system Dimensions/Data Size e a L1 L2 H3 RPM Only use filtere coolant flui ( particle size = 100 µm). Do not run without coolant. Do not use for machining abrasive materials such as cast iron, etc. M Nm Ratio n1:n2 Wrench QTS-200M ER : QTS-200M ER : QTS-300M QTS-300M ER : ER :
7 Cylinrical shank holer with cylinrical shank an flat. For flexible use of aapters in boring bar holers. Size Item No. D L3 F1 L1 m b ER-25QF G⅛" 12 ER-32QF G¼" 15 ER-40QF G⅜" 19 7
8 Starter set Size Item No. One-han wrench Spanner wrench for aapter Welon/Whistle- Notch aapter Short combination mill aapter Collet chuck Spanner wrench ER-25QF Ø 16 mm Ø 16 mm ER ER-32QF Ø 20 mm Ø 22 mm ER ER-40QF Ø 25 mm Ø 27 mm ER Collet chuck aapter DIN 6499, ISO Size Item No. F1 F2 e L2 L1 Nm Collet size ER-25QF ER ER ER ER-32QF ER ER ER ER-40QF ER ER ER
9 Collet chuck aapter short DIN 6499, ISO Size Item No. F1 F2 e L2 L1 Nm Collet size ER-25QF ER ER ER-32QF ER ER ER-40QF ER ER Collet chuck aapter extene DIN 6499, ISO Size Item No. F1 F2 e L2 L1 Nm Collet size ER-25QF ER ER ER-32QF ER ER ER-40QF ER ER
10 Welon/Whistle Notch aapter for tool shanks accoring to DIN 6535-HB an -HE Size Item No. F1 F2 L3 e L2 L1 ER-25QF ER-32QF ER-40QF
11 Combination arbor aapter for sie mills, face mills, or isk cutters Size Item No. F1 F2 e L1 a ER-25QF ER-32QF ER-40QF Universal esign: key an rivers can be remove. All aapters are elivere with the stanar arbor clamping bolt without hole for coolant supply. Arbor clamping bolt with coolant hole for internal coolant supply
12 Blank Size Item No. F1 F2 L1 ER-25QF ER-32QF ER-40QF Protection cover Size Item No. F1 L1 a ER-25QF ER-32QF ER-40QF
13 V-flange holer DIN ISO Size Item No. SK F1 L1 L2 ER-25QF SK SK ER-32QF SK SK ER-40QF SK HSK holer DIN 69893A/C, ISO 12164A/C Size Item No. HSK F1 L1 L2 ER-25QF HSK63A ER-32QF HSK63A ER-40QF HSK63A
14 Preset master aapter Etche with actual gauge length measurement Size Item No. F1 L1 ER-25QF ER-32QF ER-40QF Master gauge Size Item No. F1 F2 L1 ER-25QF ER-32QF ER-40QF
15 Accessories Threa nut for aapter Size Item No. M F1 ER-25QF M 40 x ER-32QF M 50 x ER-40QF M 62 x Locking washer for aapter Size Item No. ER-25QF ER-32QF ER-40QF
16 Accessories Collet nut ERQF for internal coolant supply using seal washer DIN 6499, ISO Size Item No. M Recommene torque Nm Seal washer ER-25QF M 40 x ER-32QF M 50 x Collet nut ERQF-BC with ball bearing, for internal coolant supply using seal washer DIN 6499, ISO Size Item No. M Recommene torque Nm Seal washer ER-40QF M 62 x
17 Accessories Collet nut ERQF-A short external coolant supply DIN 6499, ISO Size Item No. M Recommene torque Nm ER-25QF M 40 x ER-32QF M 50 x Seal washer for collet nut for internal coolant supply Size Item No. Single parts Item No. Complete set Range per seal washer No. inclue per set ER [*10] ER [*10] ER [*10] ER [*10] ER [*10] Orering example: fits to ER16 an shank =
18 Accessories One-han wrench for riven toolholers: to hol the spinle when tightening Size Item No Spanner wrench to clamp/unclamp collet nuts ERQF an aapter A B Size Item No. Type ER-25QF A ER-32QF A ER-40QF B 18
19 Quality without compromise. All manufacturing steps are base on highest precision. Accoring to our own evice that for the manu facture of high precision tooling systems high precision machine tools are essential we only use the latest machine tool technology to manufacture our parts. At WTO not only the final proucts but also all manufacturing steps are checke an ocumente. All our proucts are measure on high precision 3D-coorinate-measuring machines. 19
20 WTO worlwie USA WTO Inc. Germany WTO GmbH China WTO Asia WTO GmbH Auf er oberen Au Ohlsbach Germany WTO Inc A South Lakes Drive Charlotte, NC USA WTO Asia Unit 756A, Tower 3 German Center No. 88 Keyuan Roa Puong Shanghai China Our istribution partners. Competence right there. Australia Dimac Tooling Lt. sales@imac.com.au Finlan Suomen Terätuonti Oy myynti@stt.as Japan NK Works Co. Lt. k_samba@nk-works.co.jp Spain ITALMATIC, S.A. italmatic@italmatic.es Belarus JSC PMI GROUP tool@pmi.by France Utilis France Sàrl contact@utilis.com Korea WTO Korea Office is.chon@wto-korea.com Sween Komet Scaninavia AB scaninavia@kometgroup.com Brazil TF2 tfois@tfois.com.br France Société Jung info@r-jung.com Netherlan Klein Tooling B.V. mail@kleintooling.nl Switzerlan Utilis AG info@utilis.com Canaa Mittmann Inustrial Inc. info@mittmann.com Great Britain John Walton Lt. sales@chucks.co.uk Russia OTS-Technology Lt. sales@otst.ru Taiwan KAIKO Enterprise Co. Lt. info@kaiko.com.tw China Shanghai Gange m.wang@wto-asia.com Inia A.H. Rao ahr.rao@gmail.com Russia Haltec Lt. info@haltec.ru Turkey Seat Yurtsever seat@yurtsever.ch Czech Republic ALBA precision, spol. s.r.o. info@albaprecision.cz Israel E.Y.A.R. Lt. yehoshua@eyar.co.il Slowakia ALBA precision s.r.o. albaprecision@albaprecision.sk Ukraine LCC SPA Stankopromimport info@phoenix-ua.com Denmark Finn A. Vaerktoj A/S info@finn-a.k Italy Proxima H.T. s.r.l info@proximaht.it Spain DTC Tecnologia S.L. tc@tctechnologia.com 04I 2012 en
QuickFlex. Adapter Program. The new quick change system for high performance and precision. Minimal investment, maximal expandability.
QuickFlex The new quick change system for high performance and precision. Minimal investment, maximal expandability. Adapter Program QuickFlex Minimal investment, maximal expandability. Minimal investment
Blade Holders. with high pressure internal coolant supply for parting and grooving.
Blade Holders with high pressure internal coolant supply for parting and grooving. Blade Holders with high pressure internal For VDI radial tooling turret VDI double serration for higher flexibility Valve
Thread Whirling Unit. High Productive Thread Whirling with patented quick change system for significant reduction of tool set-up time.
Thread Whirling Unit High Productive Thread Whirling with patented quick change system for significant reduction of tool set-up time. Suitable insert holders available from leading cutting tool manufacturers.
Broaching Unit. The new state of the art broaching unit for economic manufacturing of oriented keyways and splines. This investment pays.
Broaching Unit The new state of the art broaching unit for economic manufacturing of oriented keyways and splines. This investment pays. In operation: Broaching Unit Broaching Unit for ID and OD Working
nanoflex Designed for Swiss Type Lathes The new quick change system with very compact design and very high precision.
The new quick change system with very compact design and very high precision. Minimal investment, maximal expandability. Designed for Swiss Type Lathes The perfect combination: ER collet chuck and modular
Gear Hobbing Unit. High Productive Manufacturing of Gears with CNC Turning Centers. Maximum flexibility, high quality, optimal handling.
Gear Hobbing Unit High Productive Manufacturing of Gears with CNC Turning Centers. Maximum flexibility, high quality, optimal handling. In operation: Gear Hobbing Unit Gear Hobbing Unit for Turn/Mill Centers
Quick-change adapters, positive drive inch sizes
P Quick-change aapters, positive rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable
Balanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
Tension / Compression tap chucks for tapping cycles that are not synchronized
Tension / Compression tap chucks for tapping cycles that are not synchronize For tapping applications on CNC machines where the revolutions per minute an fee rate are not synchronize to the tap pitch,
PINZBOHR BORING SYSTEM. Index
Index - Rough heads - Finish heads - Micro boring heads & boring bars - A4016 micro heads & 16mmØ shank boring bars - Key to select arbors - Arbors programme - Extensions & reducers - Large diameter boring
Tapping attachments Tap chucks Cutting fluids
Tapping attachments Tap chucks Cutting fluis Quality, reliability an goo service are what TAPMATIC stans for Since its establishment in 1952, Tapmatic has manufacture tapping attachments of the highest
FMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12
1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested
SuperLinePlus. Edition The fastest service for special tooling! Shortest delivery times for special tools of the highest quality!
Edition 2009 Quotation within 24h! Tool delivery within 3 weeks SuperLinePlus The fastest service for special tooling! Shortest delivery times for special tools of the highest quality! SL Plus solid carbide
DOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
/00 RK INOX 10/16 EN RIVKLE. Stainless steel blind rivet nuts and studs
999000000400 RK INOX 10/16 EN RIVKE tainless steel blin rivet nuts an stus RIVKE tainless steel Contents Page RIVKE tainless steel New prouct range 3 New thin hea esign 4 ubricate RIVKE range 5 RIVKE tu
Manual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
Driven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
Split pillow blocks
Definition an capabilities 638 Series 639 Variants 639 Design criteria: loas an torques 640 Installation/Assembly criteria: seal selection 641 Characteristics 642 Pillow block housing for bearings with
E3000 Series. Electric System. ø1.18", ø0.98", ø0.79" ø1.18", ø1.0", ø0.98", ø0.897" ø1.97", ø1.18" 7 TECHNICAL DATA 8 APPLICATION EXAMPLES
NC / CNC LATHE & AUTOTION SOLUTIONS Series Electric System,~, min - (rpm) One Piece Type Outsie Diameter Moular Type Outsie Diameter,, ø.9" (ø,, mm),,, (ø,.,,. mm) ispee / / -,rpm E ø." ø.9" ø." ø.9",~,
Floating Holder. Radial float and angular float mechanisms compensate for misalignment between reamer and pre-drilled hole.
Specialize Applications ing Holer Specialize Relate Stub Holer Tapping Chuck Tap Aapter Aapter Enmill Chuck Straight Chuck ing Holer High precision reaming with special purpose machines an transfer lines.
your reliable partner EAS -Compact K.490.V16.EN
ES -Compact K.490.V16.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one of the most traitional an yet most innovative
BRUSHLESS MOTOR & SPINDLE E3000 SERIES Modular Type ø1.18"(ø30 mm)
BRUSHLESS MOTOR & SPINDLE SERIES Moular Type ø."(ø mm),~, min- (rpm) Maximum Output W Motor spee is isplaye accurately on the front panel. Auto or Manual Control Moes. Can be installe on Special-Purpose
Land Area : 215,000 ft 2. Land Area : 200,000 ft 2. Land Area : 286,000 ft 2. Land Area : 5,400 ft 2 Land Area : 719,000 ft 2
TURNING CENTERS by MACHINING CENTERS by YAMA SEIKI USA belongs to the GMT (GOODWAY Machine Tools) Group, which includes well-known machine tool manufacturers, GOODWAY, AWEA and EXTRON. The GMT Group has
Clamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
WINNER! ALBRECHT. Precision Chucks
WINNER! ALBRECHT Precision Chucks At present, the Albrecht APC is the best performing chuck world wide. In the area of speed, tool life and safety. 3 4 You can expect: A clearly higher chip removal rate
Quick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.
HKK CURVED JAW COUPLINGS HITEX COUPLINGS
HKK CURVE JAW COUPINGS HITEX COUPINGS CURVE JAW COUPINGS Coupling selection The HKK jaw coupling selection shoul be mae accoring to IN 740-2. Proper imensioning of the coupling shoul be one to ensure that
WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
Accessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
High-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
PinzBOHR High Precision Boring Tools
PinzBOHR High Precision Boring Tools What to expect from our boring tools. Our European mae boring tools have been proven worl wie to be among the best you can buy. Machinists love our boring tools because
Omslag. Main Catalogue EN
Omslag Main Catalogue EN We reserve the right to moify any specification an/or item shown in the present catalogue without notice. Information, photos, rawings an technical ata specifie in the publication
* Please mention "Code Number" upon your order.
BRUSHLESS MOTOR & SPINDLE FOR Series Please mention " Number" upon your orer. '...A PRK25E Ver. E25 SERIES Ultra Precision Excellent urability an high rigiity are obtaine using a highspee brushless motor.
Shaft Diameter d 1 3 /16 01 B /4 01 B /16 01 B /2 01 B /16 01E B /4 01E B
Lubrication Fittings Lubrication points are tappe 1/4 NPT or 1/8 NPT epening on size an series, an fitte with nipples for grease lubrication as stanar. nipples may be remove an replace with other fittings
BALL BEARINGS & STEEL SHAFTS
BA BEARINGS & STEE SHAFTS Every care has been taken to ensure the accuracy of the information containe in this catalogue, but no liability can be accepte for any errors or omissions. We reserve the right
E3000 / E3200 Series. Electric System. ø1.18"(ø30 mm) ø0.897"(ø22.8 mm) ø1.0", ø0.98"(ø25.4, ø25 mm) ø1.18", ø1.97"(ø30, ø50 mm)
NC / CNC LATHE & AUTOTION SOLUTIONS / E Series Electric System AMERICAN ROTARY TOOLS CO. Toll Free US & CA + () - Outsie Diameter,~, min - (rpm) Output W One Piece Type Outsie Diameter,~, min - (rpm) Output
Built for Speed. Pinzbohr High Precision Boring Tools. Pinzbohr Modular Boring System. BohrSTAR Boring Kits. Rough and Finish Boring Heads
Pinzbohr High Precision Boring Tools BohrSTAR Boring Kits Rough an Finish Boring Heas Boring Hea Toolholers Carbie an HSS Boring Bars Built for Spee. BohrSTAR High Precision Kits Range 0.314" up to 8.27"(8mm
Micro-Grinder AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 250 WEST DUARTE ROAD, #E MONROVIA, CA USA
Micro-Griner Air Driven 0,000 min - (rpm) 0,000 min - (rpm) PRESTO 0,000 min - (rpm) MODULAR TYPE HIGH TORQUE AIR GRINDER High torque air motor assemble with special vane mechanism. Two types of air motors
On Aluminum. we have an edge! Aluminum. 3-Flute Series for. Get maximum return on performance with Dura-Mill s FEATURES
On Aluminum we have an ege! Get maximum return on performance with Dura-Mill s 3-Flute Series for Aluminum U.S. Patent 6,899,494 FEATURES Proven an patente WhisperKut Design ensures stability an chatterfree
NI PS-15/16/17 Side Mount Brackets
INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power
Hitachi Tool Engineering Europe GmbH. No
Hitachi Tool Engineering Europe GmbH No. 324.3 Inexable illing Too AS The new AS/AHU ini has 2 kins of insert shapes an applications: JDT type insert for 90 cutting JDT Schneiplatte für 90 Bearbeitungen
Poly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
New Super Metric Ball Bushing * Bearings Technical Bulletin
ew Super Metric all ushing earings Technical ulletin Super Metric all ushing earings igh performance from superior esign: coefficient of friction as low as 0,001. This allows the use of smaller less expensive
Technical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
PRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
DYNAS3 LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING. Explore the future
LEADING SOLUTIONS FOR DYNAMIC ENGINE TESTING DYNAS3 Explore the future Automotive Test Systems Process & Environmental Medical Semiconductor Scientific 2 DYNAS 3 Best-in-class AC dynamometers The HORIBA
ACE LOCK Milling Chucks
ACE LOCK Milling Chucks Run-out accuracy: 10 µm/0.0004 at the distance of 100 mm/4.00 from the end of the holder. Milling Chucks Spiral slits are precision-machined with a laser securely hold the cutter
About Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
Triple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
SK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
Tradition in Perfection.
Angular Heads Tradition in Perfection. For more than 50 years the name ROMAI has stood for the highest precision and process reliability in machining. The next generation begins today. We have succeeded
Product Overview INCH
INCH Product Overview CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making gearboxes and variators for light industry applications. Reliable partner in power transmission equipment
Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
The Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use
C-ROM Sizing Software ETP Keyless Shaft Mount Connections The Ieal ocking evices For Shaft-to-Hub Connections. ETP Connections are ieal for positioning an locking shaft components in a system. They are
8870 Series Servohydraulic Testing Systems Flexible and Compact Servohydraulic Testing Solutions
8870 Series Servohyraulic Testing Systems Flexible an Compact Servohyraulic Testing Solutions 8870 Series Brochure 8870 Series Flexible an Compact Servohyraulic Testing Solutions The Instron 8870 series
Fork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
MPS1 NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE
NEW HIGH PERFORMANCE SOLID CARBIDE DRILL HIGHER FEED, INCREASED RELIABILITY, REDUCED COST PER HOLE AND LONGER TOOL LIFE NEW HIGH PERFORMANCE SOLID CARBIDE DRILL PRODUCTIVITY Increase productivity with
Mineral Industry. Drive solutions for reclaimers, stackers, bulk conveyors applications
Mineral Industry Drive solutions for reclaimers, stackers, bulk conveyors applications A world specialist in drive systems World leader in the design and production of alternators and motors, Leroy-Somer,
Shrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 12
Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-28 issue 12 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional
Wire-thread inserts. Heavy-duty threads for series or repair
Wire-threa inserts Heavy-uty threas for series or repair The center of excellence for highperformance fastening technology KVT-Fastening is an expert for high-quality fastening applications an offers engineering
TNS. Stem Thermometers according to DIN EN nitrogen filled option: contacts. Environmentally-friendly measuring system with non-toxic nitrogen
Stem Thermometers accoring to DIN EN 13190 nitrogen fille option: contacts measuring monitoring analysing TNS Environmentally-frienly measuring system with non-toxic nitrogen Fast response time Measuring
Rexnord Tollok Locking Assemblies
Tollok Catalog ownloa the most up-to-ate version at www.rexnor.com/ocumentation Rexnor Tollok Locking Assemblies Why Choose Rexnor Tollok Locking Assemblies? Why Choose Rexnor? When it comes to proviing
Single-acting pneumatic cylinder type ECS
Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder
Stretching Tools: ITH-Stretch-Method
Stretching Tools: ITH-Stretch-Metho The ITH-Stretch-Metho is capable of highly accurate, repeatable results to a tight tolerance of ±2.5%. These results are possible because the ITH-Stretch-Metho is free
Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
HSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...
(IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE
DIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...
IN 69871 SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER........ 47 SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50
EVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
5AX Rotary Table TAP
All Features of Product Line 5 Included NEW Swiss Rotary Table Technology A winner in terms of technology, space and price perfect for small and medium-sized machining centers TAP rotary tables 5.216 1
Infographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph Valid for: serial nos. 745-xxx-xxxx, 747-xxx-xxxx Rights reserved to alter specifications without notice. PART # 0463 619 001 ESAB AB 2018 i Ordering number Product
Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9
Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an
Drive solutions for the oil and gas industry.
Drive solutions for the oil and gas industry. maxon Heavy Duty drives: Robust design for extreme operating conditions. Founded in Switzerland. Available worldwide. maxon a strong global brand. maxon motor,
Coorinate Measuring Machine Applicable Probe Hea ZEISS HSS VAST ZEISS Probe Hea Specifications Probe Hea VAST-XT Stylus + extension maximum length () Stylus minimum tip iameter () Stylus + extension maximum
Wobble Sticks Precise Manual Sample Transfer
Wobble Sticks Precise Manual Sample Transfer The UHV Design wobble stick range offers ultimate versatility for your bespoke applications. Our slimline modular concept benefits from UHV Design s cutting-edge
TTM. Sheath Thermocouples. Flexible sheathed cable C. Sheath diameter from 0.5 mm. O O Sheath in stainless steel 1.
Sheath Thermocouples measuring monitoring analysing TTM Flexible sheathed cable OMeasuring O ranges: -50... +1100 C O O Sheath in stainless steel 1.4571 or Inconel O O NiCr-Ni oder Fe-CuNi thermocouples
Type2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
HPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System
HPI - PIONEER Premium Holding & Work Holding SG - Second Generation Holding System The Pioneer Group We have been in the metal cutting industry for over three decades and contributed to the progress of
Knife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11
Knife gate valve JTV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-21 issue 11 Knife gate valve JTV Stafsjö s knife gate valve JTV is reliable
Pumps and Flow Measurement for the Polyurethanes Industry
Pumps and Flow Measurement for the Polyurethanes Industry 2 Pumps and flow measurement for the polyurethanes industry Content 3 Company 5 Gear Pumps for the Polyurethanes Industry 6 Pressure Relief Valves
Fork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
Radial Drilling And Milling Heads TYPE HAAS
Radial Drilling And Milling Heads TYPE HAAS 1.External coolant supply 2. 3. D X capacity S A B C G M E MODELS VDI-40-FL40-32-104 104.85 SL-20/TL-15 5006-600 VDI-40-FL40-32-117 40 2-20 ER32 50 4000 106
Rectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
Hard metals for precision tools
Hard metals for precision tools EN Production sites Tianjin China Taiwan Shanghai Changtai Xiamen 1+2 Tamshui Wugu ispatching centre Logistics centre Kempten, Germany 2 product line Carbide products from
Ø range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max
Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range
Mobile Hydraulics Solutions
Mobile Hydraulics Solutions Fan Drives Hydraulically Driven Lube Oil PTO Gear Pumps KP Asphalt Gear Pumps BTH 1 Mobile Hydraulics Solutions Content 2 Hydraulic motors KM 3-19 Fan drives 3 KM 1 space optimized
Wall thickness. The following items * are supplied in coils:
pipe Fuiotherm -pipe SDR 6 Material: fuiolen PP-R erie : SDR 6 / S 2.5 Stanar: DIN 8077 / 78, DIN EN ISO 15874 ASTM F 2389, CSA B 137.11 Regitration: DVGW, ÖVGW, SVGW, KIWA, SAI, TIN, TSE, SITAC, SII,
HIGH PRECISION HIGH PERFORMANCE
Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility
Multi Function Efficient Dynamic Altitude Simulation MEDAS
Multi Function Efficient Dynamic Altitude Simulation MEDAS BENEFITS A wide simulation range and extreme flexibility SIMULATE POSITIVE & NEGATIVE PRESSURE One system for positive & negative pressure Steady
BSERIES. Helicalbevel GearReducers
Helicalbevel GearReducers Features The technological content of B-Series gear reducers allows for an extraordinary performance/lifespan ratio. These highly versatile gear units are successfully used in
ER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
Installation instructions
www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure