Blade Holders. with high pressure internal coolant supply for parting and grooving.
|
|
|
- Angela Iris Dennis
- 6 years ago
- Views:
Transcription
1 Blade Holders with high pressure internal coolant supply for parting and grooving.
2 Blade Holders with high pressure internal For VDI radial tooling turret VDI double serration for higher flexibility Valve to switch external coolant supply on/off Screw for center height adjustment Nozzle for external coolant supply Adjustment range for parting blade For VDI face tooling turret VDI double serration for higher flexibility Screw for center height adjustment Valve to switch external coolant supply on/off Nozzle for external coolant supply Adjustment range for parting blade 2
3 coolant supply Front mounted blade holder, : towards main spindle side reversed towards sub spindle side Top mounted blade holder, :... towards main spindle side reversed towards sub spindle side 3
4 Blade Holders with high pressure internal coolant supply parting blade adapter L/R 25 VDI25 radial tooling turret 21 (26) L/R 30 VDI30 radial tooling turret 21 (26) L/R 30 VDI30 radial tooling turret 25 (32) parting blade adapter L/R 40 VDI40 radial tooling turret 25 (32) L/R 40 VDI40 radial tooling turret 25 (32) WTO GmbH I Subject to change without notice
5 Blade Holders with high pressure internal coolant supply L1 L2 H L/R 30 VDI30 face tooling turret 21 (26) L/R 30 VDI30 face tooling turret 25 (32) L/R 40 VDI40 face tooling turret 25 (32) L/R 50 VDI50 face tooling turret 25 (32) WTO GmbH I Subject to change without notice 5
6 Blade Holders with high pressure internal coolant supply parting blade adapter L/R 55 Biglia D (32) L/R 45 BMT (26) L/R 55 BMT (32) L/R 65 BMT (32) L/R 65 BMT (32) L/R 60 Goodway GS M 25 (32) L/R 40 Mazak HQR-100/150MSY 25 (32) L/R 40 Mazak HQR-200/250MSY 25 (32) L/R 40 Mazak QTN-100M 25 (32) L/R 40 Mazak QTN-200/250M 25 (32) L/R 50 Mazak QTN-300/350/400/450M 25 (32) L/R 68 Mazak QTS-100/150/200/250M 25 (32) L/R 80 Mazak QTS-300/350M 25 (32) L/R 40 Muratec MT 12/ (32) L/R 40 DMG MORI NZX (32) L/R 60 DMG MORI NLX (32) L/R 60 Okuma LB/LU , LT 3000M 25 (32) L/R 60 Okuma LB/LU , LT 3000M 25 (32) L/R 60 Okuma LB 4000M 25 (32) L/R 50 Takisawa TCY-160, (32) L/R 68 Takisawa TY (32) L/R Doosan Puma 280, 2100, (32) L/R Mazak QTS-200/ (32) L/R Mazak QTS-300/ (32) L/R Okuma LB (32) L/R Okuma LB (32) WTO GmbH I Subject to change without notice
7 Blade Holders with high pressure internal coolant supply parting blade adapter L/R 55,4 Okuma LT 2000 (16 stations) 21 (26) Center height adjustable using machine Y axis parting blade adapter B Turret specification PB (SH) L/R 62 Nakamura D (26) L/R 80 Nakamura D (32) L/R 90 Nakamura D (32) L/R 100 Nakamura D (32) WTO GmbH I Subject to change without notice 7
8 WTO worldwide USA WTO Inc. Germany WTO GmbH China WTO Asia WTO GmbH Auf der oberen Au Ohlsbach Germany WTO USA S Lakes Dr Ste F Charlotte NC USA WTO Asia Unit 756A, Tower 3 German Center No. 88 Keyuan Road Pudong Shanghai China Our distribution partners. Competence right there. Australia Dimac Tooling Ltd. sales@dimac.com.au Finland Suomen Terätuonti Oy myynti@stt.as Japan NK Works Co. Ltd. k_samba@nk-works.co.jp Spain ITALMATIC, S.A. italmatic@italmatic.es Belarus JSC PMI GROUP tool@pmi.by France Société Jung info@r-jung.com Korea WTO Korea Office is.chon@wto-korea.com Sweden Komet Scandinavia AB scandinavia@kometgroup.com Brazil TF2 tfdois@tfdois.com.br France Utilis France Sàrl contact@utilis.com Netherlands Klein Tooling B.V. mail@kleintooling.nl Switzerland Utilis AG info@utilis.com Canada Mittmann Industrial Inc. info@mittmann.com Great Britain Cutwel Ltd. sales@cutwel.net Norway Helge Karlsen Verktøy og Maskin AS hkvm@hkvm.no Taiwan KAIKO Enterprise Co. Ltd. info@kaiko.com.tw China Shanghai Gangde m.wang@wto-asia.com India A.H. Rao ahr.rao@gmail.com Russia Haltec Ltd. info@haltec.ru Turkey MYK CNC MAKINA SAN. VE mehmet.karaman@mykcnc.com.tr Czech Republic ALBA precision, spol. s.r.o. info@albaprecision.cz Israel E.Y.A.R. Ltd. yehoshua@eyar.co.il Russia OTS-Technology Ltd. sales@otst.ru Ukraine LLC SPA Stankopromimport info@phoenix-ua.com Denmark Tool-part cj@tool-part.dk Italy Prymark srl commerciale@prymark.it Slowakia ALBA precision s.r.o. albaprecision@albaprecision.sk 09 I 2015 en
Broaching Unit. The new state of the art broaching unit for economic manufacturing of oriented keyways and splines. This investment pays.
Broaching Unit The new state of the art broaching unit for economic manufacturing of oriented keyways and splines. This investment pays. In operation: Broaching Unit Broaching Unit for ID and OD Working
Gear Hobbing Unit. High Productive Manufacturing of Gears with CNC Turning Centers. Maximum flexibility, high quality, optimal handling.
Gear Hobbing Unit High Productive Manufacturing of Gears with CNC Turning Centers. Maximum flexibility, high quality, optimal handling. In operation: Gear Hobbing Unit Gear Hobbing Unit for Turn/Mill Centers
Thread Whirling Unit. High Productive Thread Whirling with patented quick change system for significant reduction of tool set-up time.
Thread Whirling Unit High Productive Thread Whirling with patented quick change system for significant reduction of tool set-up time. Suitable insert holders available from leading cutting tool manufacturers.
nanoflex Designed for Swiss Type Lathes The new quick change system with very compact design and very high precision.
The new quick change system with very compact design and very high precision. Minimal investment, maximal expandability. Designed for Swiss Type Lathes The perfect combination: ER collet chuck and modular
QuickFlex. Adapter Program. The new quick change system for high performance and precision. Minimal investment, maximal expandability.
QuickFlex The new quick change system for high performance and precision. Minimal investment, maximal expandability. Adapter Program QuickFlex Minimal investment, maximal expandability. Minimal investment
QuickFlex. Designed for. The new quick change system for high performance and precision. Minimal investment, maximal expandability.
The new quick change system for high performance an precision. Minimal investment, maximal expanability. for MAZAK Quick Turn Smart 200M/300M/350M Designe for 1 The perfect combination: ER collet chuck
DOUBLE OCTOMILL TM PRODUCT RANGE
DOUBLE OCTOMILL TM PRODUCT RANGE Double Octomill insert selection and cutting data recommendations, see page 6. complete insert programme, see page 7. Tool angles: Jo = -11q Jp = - 8q Jf = - 8q Pitch
WORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY ELECTRIC ARC FURNACES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS
STEEL INDUSTRY STEEL LADLES REFRACTORY CONCEPT SOLUTIONS TOGETHER FOR MORE AT CALDERYS, OUR MISSION IS TO DELIVER VALUE TO OUR CUSTOMERS. We are a world leader in providing refractory solutions and services.
AUSTRIA. Table 1. FDI flows in the host economy, by geographical origin. (Millions of US dollars)
Table 1. FDI flows in the host economy, by geographical origin World 5 690 138 6 195 3 184 10 784 7 933 31 154 6 858 9 303 840 10 618 5 760 Developed economies 5 740 13 5 341 2 689 10 137 6 291 29 721
Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects
09.2007 / a 4183 en - 03.2008 / b Drive systems & electrical energy production for construction, local government structures, large infrastructure and industrial projects www.leroy-somer.com Drive systems
Land Area : 215,000 ft 2. Land Area : 200,000 ft 2. Land Area : 286,000 ft 2. Land Area : 5,400 ft 2 Land Area : 719,000 ft 2
TURNING CENTERS by MACHINING CENTERS by YAMA SEIKI USA belongs to the GMT (GOODWAY Machine Tools) Group, which includes well-known machine tool manufacturers, GOODWAY, AWEA and EXTRON. The GMT Group has
Single-acting pneumatic cylinder type ECS
Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder
ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
Rectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
PLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and robust. Hot air tool TRIAC AT The new TRIAC AT is an intelligent yet robust hot air tool for welding and shrinking plastic. It is designed for the needs of
Spain s imports by oil product group and country of origin
Corporación de Reservas Estratégicas de Productos Petrolíferos Castellana, 79 28046 Madrid T. +34 91 360 09 10 Updated F. +34 91 420 on39 45 www.cores.es September 12 th 2018 Spain s imports by oil product
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph
PARTS MANUAL EMP 285ic 1ph & EMP 285ic 3ph Valid for: serial nos. 745-xxx-xxxx, 747-xxx-xxxx Rights reserved to alter specifications without notice. PART # 0463 619 001 ESAB AB 2018 i Ordering number Product
Infographics on Electromobility (January 2019)
Infographics on Electromobility (January 2019) Publisher: BMW Group Corporate Communications Electromobility Last Update: 04.01.2019 Contact: presse@bmw.de ELECTROMOBILITY IN GERMANY. SHARE IN NEW REGISTRATIONS
NI PS-15/16/17 Side Mount Brackets
INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power
1. INTERNATIONAL OVERVIEW. 1.0 Area and population. population (1,000) area
1.0 Area and population area population (1,000) km 2 2000 2010 2018 1 inhabitants per km 2 Belgium 30,530 10,251 10,920 11,443 375 Germany 357,380 82,212 81,777 82,952 232 Estonia 45,230 1,397 1,331 1,315
Wobble Sticks Precise Manual Sample Transfer
Wobble Sticks Precise Manual Sample Transfer The UHV Design wobble stick range offers ultimate versatility for your bespoke applications. Our slimline modular concept benefits from UHV Design s cutting-edge
BP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28
EMS215ic, EMP215ic, EM215ic
EMS215ic, EMP215ic, EM215ic Spare parts list 0463 412 001 GB 20170126 Valid for: serial no. 552, 615-xxx-xxxx Ordering number Product Notes 0558 102 239 EMS 215ic Bobbin Ø4-8" (100-200 mm). CSA/Bayonet
Total credit to the non-financial sector (core debt), % of GDP Table F1.1
Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0
Installation instructions
www.somfy.com Sonesse 0 DCT Installation instructions Ref :505080A Please read installation instructions and programming instructions completely prior to proceeding with installation and programming. Failure
Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9
Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an
Roll Up WireFree IR. Installation instructions
www.somfy.com TM Roll Up WireFree IR Installation instructions Ref :5059844 Safety This Somfy product must be installed by a professional motorization and home automation installer, for whom these instructions
Knife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11
Knife gate valve JTV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-21 issue 11 Knife gate valve JTV Stafsjö s knife gate valve JTV is reliable
Primary energy. 8 Consumption 9 Consumption by fuel. 67 th edition
Primary energy 8 Consumption 9 Consumption by fuel 67 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 27 28 29 2 211 212 213 214 215 216 217 217 26-16 Share 217
PREVIEW. Fieldbus System for Distributed I/O NEW PRODUCTS
NEW PRODUCTS PREVIEW Fieldbus System for Distributed I/O! Dual Port EtherNet/IP TM Gateway controls up to 8 Valve Manifolds and 8 Input blocks Controls up to 128 Inputs and 128 Outputs Supports QuickConnect
replacement parts 6.1 General 6.2 Ordering
6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,
PLASTIC WELDING. New! TRIAC AT. Intelligent and robust.
PLASTIC WELDING TRIAC AT New! Intelligent and roust. TRIAC AT features Suitale for the work site Closed loop controlled temperature Open loop controlled air volume Intelligent «e-drive» operating unit
1. General company data
Self disclosure 1. General company data 1.1. Company address Company: Address: Zip-Code: City: Country: Telephone: Fax: Email: Internet: Established: Affiliation: Ownership: Legal form: CC Reg no: VAT:
THE WITTUR ANSWER TO THE MACHINE ROOMLESS MARKET REQUIREMENTS. MRL W Line. EMOTION IN MOTION
THE WITTUR ANSWER TO THE MACHINE ROOMLESS MARKET REQUIREMENTS EMOTION IN MOTION ADVANCED FEATURES THE WITTUR ANSWER TO THE CURRENT MRL MARKET REQUIREMENTS The, Wittur s new generation of machine roomless
Production of heat by type Terajoules
Production of heat by type Table Notes geo represents heat used directly for district heating, agriculture etc. without a commercial transaction taking place. Please refer to the Definitions Section on
You ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
5AX Rotary Table TAP
All Features of Product Line 5 Included NEW Swiss Rotary Table Technology A winner in terms of technology, space and price perfect for small and medium-sized machining centers TAP rotary tables 5.216 1
Global Valuation Summary - SAMPLE PAGES
- SAMPLE PAGES Regional Valuation Comparisons... 2... 4... 7... 9... 11 Developed Asia Pacific ex... 13 Developed Europe ex... 16 Advanced Emerging... 19 Appendix... 22 Disclaimer... 23 Global Market Valuations
Global Dialysis - Cost per Dialysis Session
Cost per session for dialysis where a cost has been entered for a dialysis centre. All costs have been converted to US Dollars as at 19 May 2006. Note that the costs do not state what is covered by a dialysis
Stafsjö s ATEX solutions for category 1 D (Zone 20)
Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice. 1 2017-02-2 issue 1 ATEX solutions for category 1 D
CrimpTest-1 kn. Calibration Bracket
CrimpTest-1 kn Calibration Bracket 431-471-02 May 2017 CrimpTest-1 kn Calibration Bracket Manual This manual describes the operation of the calibration test rig part no. 432-671, for the purpose of checking
Fork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
Knife gate valve MP. Data is only for informational purpose. All specifications are subject to change without notice issue 5
Knife gate valve MP Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-11 issue 5 Knife gate valve MP Stafsjö s knife gate valve MP is a full bore
ESAB Welding & Cutting Products Attn: Customer Service Dept. P.O. Box , 411 S. Ebenezer Road Florence, SC
6.0 General Replacement Parts are illustrated on the following figures. When ordering replacement parts, order by part number and part name, as illustrated on the figure. Always provide the series or serial
Photo courtesy of NZTA
international comparisons for road deaths Photo courtesy of NZTA 14 Motor Vehicle Crashes in New Zealand international comparisons for road deaths 141 Contents TABLES Table 1 International comparison of
Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A
Performance Derby: MSCI Regions/Countries Earnings & Revenues Growth 2019E / 2018E / 2017A February 28, 2018 Dr. Ed Yardeni 516-972-7683 eyardeni@yardeni.com Joe Abbott 732-497-5306 jabbott@yardeni.com
Fork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 12
Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-28 issue 12 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional
Ultima SLM Ni-Cd battery Performance with ultra low maintenance
Ultima SLM Ni-Cd battery Performance with ultra low maintenance July 2004 2 Ultima Ni-Cd battery Ultra low maintenance Developed in line with long proven nickel-cadmium technology, Ultima is an exceptionally
Drive solutions for the oil and gas industry.
Drive solutions for the oil and gas industry. maxon Heavy Duty drives: Robust design for extreme operating conditions. Founded in Switzerland. Available worldwide. maxon a strong global brand. maxon motor,
I. World trade in Overview
I. World trade in - Overview Table I.1 Growth in the volume of world merchandise exports and production, 2-5 (Annual percentage change) 2-5 23 24 World merchandise exports 4.5 5. 9.5 6. Agricultural products
Mechatronic brake system INTORQ Control
Mechatronic brake system INTORQ Control for industrial trucks, escalators and cranes setting the standard The mechatronic brake system = INTORQ Control + INTORQ BFK458 spring-applied brake Spring-applied
Our Most Important Connection is with You. NSX ARINC 600. Power and Performance NSX ARINC 600
Our Most Important Connection is with You. NSX ARINC 600 Power and Performance NSX ARINC 600 NSX (ARINC 600) Radiall s NSX Arinc 600 series has been used for more than 30 years to connect high performance
Imports of seed for sowing by country Calendar year 2011 Source: ISF compilation based on official statistics and international seed trade reports
USA 157,432 15,562 464 173,458 523 318 67 908 Germany 195,159 5,913 520 201,592 595 97 22 714 France 125,701 4,389 277 130,367 522 150 11 683 Netherlands 140,899 12,253 796 153,948 250 330 48 628 Italy
Shut-off and butterfly valves for open-close applications and control mode
I II III Shut-off and butterfly valves for open-close applications and control mode Table of contents Introduction Shut-off and butterfly valves for open-close applications Project planning, design and
Company presentation
Company presentation About us 1 Production of optoelectronic and magnetic encoders CNC machining Mechanical and electrical assembly Company LARM a.s. 2 Production area 2 050 m 2 85 employees Premises with
D6.. Butterfly valves. For controlled operation.
D6.. Butterfly valves. For controlled operation. Water is our element. www.belimo.eu Total solutions for medium and large volumetric flows. Butterfly valves from Belimo are available as classical D6..N
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004
Thermal Coal Market Presentation to UNECE Ad Hoc Group of Experts on Coal in Sustainable Development December 7, 2004 Barlow Jonker Pty Ltd Commercial in Confidence 1 Presentation Outline 1. Barlow Jonker
DIAPHRAGM PRESSURE CYLINDERS
DIAPHRAGM PRESSURE CYLINDERS Diaphragm pressure cylinders EFFBE diaphragm pressure cylinders: sensitive and robust By using EFFBE diaphragm pressure cylinders, sensitive control pro - cesses can be realised
The new STx chain hoist NEW. Sophisticated technology prepared for the future
The new STx chain hoist 03.2018 NEW Sophisticated technology prepared for the future The new STx chain hoist Sophisticated technology prepared for the future Our experts have undertaken to keep reviewing
Mileage-based User Fees In Europe and USA
Mileage-based User Fees In Europe and USA Dr. Toshinori Nemoto Professor at Hitotsubashi University The 31th Japan Road Congress International symposium: Road-tolling policies and technologies October
MODERNISATION SOLUTIONS. MRM W Line. TIME FOR A FACE-LIFT!
MODERNISATION SOLUTIONS TIME FOR A FACE-LIFT! ADVANCED FEATURES WITTUR SOLUTION FOR MODERNISATION The, Wittur flexible machine roomless electric lift, offers an ideal solution for new lifts in existing
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3,
PSF 250, PSF 305, PSF 405, PSF 505, PSF 405 RS3 PSF 410W, PSF 510W, PSF 410W RS3, PSF 510W RS3, Spare Part Catalogue 0459 694 990 041122 Ordering number... 3 PSF 250... 4 PSF 305, 405, 505, 405 RS3...
Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12
1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested
Production of heat by type Terajoules
Production of heat by type Table Notes geo represents heat used directly for district heating, agriculture etc. without a commercial transaction taking place. represents heat used for the production of
Product Overview INCH
INCH Product Overview CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making gearboxes and variators for light industry applications. Reliable partner in power transmission equipment
67 th edition. Renewable energy. Appendices. 44 Other renewables consumption 45 Biofuels production
Renewable energy 44 Other renewables consumption 45 Biofuels production Appendices A1 Solar Generation A2 Wind Generation A3 Geothermal, biomass and other Generation A4 Geothermal Cumulative installed
Over time consistency of PPP results in the OECD countries
Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized International Comparison Program Over time consistency of PPP results in the OECD countries
MODERNISATION SOLUTIONS. MRM W Line. T I M E T O M A X I M I Z E YO U R S P A C E!
MODERNISATION SOLUTIONS www.wittur.com T I M E T O M A X I M I Z E YO U R S P A C E! ADVANCED FEATURES WITTUR SOLUTION FOR MODERNISATION The, Wittur flexible machine roomless electric lift, offers an ideal
-Shape the Future with Manufacturing Technology
-Shape the Future with Manufacturing Technology GmbH & Co. KG Wilhelm-Harting-Straße 1 D-32339 Espelkamp Tel. 05772/47-97500 Fax 05772/47-537 Internet: www.--.com E-Mail:.applied@.com P. 1 / 18 in Germany
TOP SMART intelligent position monitor:
TOP SMART intelligent position monitor: Air Torque also manufacture the Top smart intrinsically safe compact valve position monitor with integrated diagnostics, self calibrating limit switches, integrated
I. Global wine markets,
I. Global wine markets, 2007-09 Table 1: Summary of the world's wine markets, 2007-09 (annual average) Vine % of cropland Wine Wine Wine Wine Wine Per adult wine Pop- GDP GDP Area under vines produced
Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a
194 Annex IV. True nationality of the 20 largest fleets by flag of registration, as at 1 January 2011 a Antigua and Barbuda Bahamas China Belgium 0 0-9 122 0.2 1 59 0.1 Bermuda 0 0-17 1 907 2.8 0 0 - Brazil
testing to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5 kn 1 kn 2.5 kn Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710 mm (67.3) 290 mm (11.4) 414 mm (16.3) 1359
Butterfly valves for open-close applications and control mode
I II III Butterfly valves for open-close applications and control mode Table of contents Introduction Butterfly valves for open-close applications Project planning, design and dimensioning 4 Butterfly
The new. Class ZURCON Z20 / Z22. New worldclass polyurethane materials. ZYour Partner for Sealing Technology
The new Class ZURCON Z20 / Z22 New worldclass polyurethane materials ZYour Partner for Sealing Technology Zurcon Polyurethane Materials for Hydraulic Seals and Scrapers Introduction Polyurethane seals
Lifting Instructions for 1336 PLUS and FORCE D Frame Drives
Installation Instructions Lifting Instructions for 1336 PLUS and FORCE D Frame Drives This publication will guide you through the steps needed to properly lift and mount the following drives: 1336 PLUS
Flying production. with travelling HF welding machines TDW & TDW-Mega. Built for you. Built to last. machines equipment expertise service
Flying production with travelling HF welding machines TDW & TDW-Mega Built for you. Built to last. machines equipment expertise service Top precision Travelling TDW & TDW-Mega More than 900 travelling
Global Coal and Coke Flows, 2008
Global Coal and Coke Flows, 2008 Phil Fisher Pet Coke Consulting Argus Petroleum Coke Summit September 17-18, 2009 Houston, TX Global Coal and Coke Flows What we will see: 1 How much steam coal is produced/
Better sealing solutions for reciprocating compressors
Better sealing solutions for reciprocating compressors Experience and know-how the basis for innovation Rings and packings are critical components for the service life of reciprocating compressors. Therefore
Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report. From 2001 to 2021
Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report From 2001 to 2021 Global CV Markets Covered Industry Production Data Truck & Bus Model Production Forecast Engine Production
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS COUNTRY/JURISDICTION * STATUS 10 NOVEMBER 2017 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013 2. ANDORRA
DIE STORAGE GAS SPRING
DIE STORGE GS SPRING Worldwide NITROGS is a global company that has a worldwide presence through its own network of subsidiaries and extensive distributor network. NITROGS SPRINGS GMBH Frankfurt, Germany
Plants. ColdMix Mobile/Semi-mobile and stationary plants. With productive capacity of t/h
Plants ColdMix Mobile/Semi-mobile and stationary plants With productive capacity of 130 400 t/h Cold Mix 130 400 t/h Flexible, pure and simple : The continuous cold mixing plant Both mobile and stationary
Knife gate valve WB. Data is only for informational purpose. All specifications are subject to change without notice issue 13
Knife gate valve WB Data is only for informational purpose. All specifications are subject to change without notice. 1 2016-06-03 issue 13 Knife gate valve WB Stafsjö's knife gate valve WB is bi-directional
OECD unemployment rate down to 6.4% in March 2016
OECD unemployment rate down to 6.4% in March 2016 The OECD unemployment rate fell by 0.1 percentage point to 6.4% in March 2016, 1.7 percentage point below the January 2013 peak. Across the OECD area,
Coal. 36 Reserves and prices 38 Production and consumption. 67 th edition
Coal 36 Reserves and prices 38 Production and consumption 67 th edition Total proved reserves at end 217 Million tonnes Anthracite and bituminous Subbituminous and lignite US 228 3116 25916 24.2% 357 Canada
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS COUNTRY/JURISDICTION * STATUS 15 DECEMBER 2017 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013 2. ANDORRA
ELEVATOR ACCORDING TO MACHINE DIRECTIVE. HHL W Line FOR A SUSTAINABLE WORLD FREE OF BARRIERS.
ELEVATOR ACCORDING TO MACHINE DIRECTIVE HHL W Line FOR A SUSTAINABLE WORLD FREE OF BARRIERS www.wittur.com ADVANCED FEATURES HHL W Line A NEW WORLD FREE OF STAIRS The HHL W Line, Wittur s machine roomless
BOLL Automatic Filter TYPE The Compact Design Two-Chamber Filter. BOLL & KIRCH Filterbau GmbH
BOLL Automatic Filter TYPE 6.72 The Compact Design Two-Chamber Filter BOLL & KIRCH Filterbau GmbH THE TASK Perfect pre-treatment In order to ensure that large combustion engines or mechanical processing
SBS-Control. Table of contents. Operating Instructions BKS24-9A. Operating Instructions
Operating Instructions BKS24-9A Operating Instructions BKS24-9A Table of contents Operating Instructions 1 Operating controls and indicators 2 2 Preparations for faultless commissioning and operating 3
No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
testing to perfection MultiTest-i Technical Datasheet
testing to perfection MultiTest-i Technical Datasheet MultiTest 0.5-i, 1-i & 2.5-i 0.5kN 1kN 2.5kN Height Width Depth Vertical Daylight* MultiTest 0.5-i 1710mm (67.3) 290mm (11.4) 414mm (16.3) 1359mm (53.5)
HELICOPTERS Service. Helicopter Maintenance Upgrades
HELICOPTERS Service Helicopter Maintenance Upgrades MISSION SUCCESS WITH AIRBUS HELICOPTERS UPGRADES Airbus Helicopters Customer Centers are at your service: providing local, on-the-spot solutions Airbus
OECD unemployment rate down to 6.5% in January 2016
OECD unemployment rate down to 6.% in January 2016 The OECD unemployment rate fell by 0.1 percentage point to 6.% in January 2016, 1.6 percentage points below the January 2013 peak. Across the OECD area,
FHA-C Mini Servo Actuators with Multi-turn Absolute Encoder
FHA-C Mini Servo Actuators with Multi-turn Absolute Encoder Robotics and Automation Machine tools Semiconductor technology Medical Packaging machines Special environments Our inspiration Your business
Uptimax Ni-Cd battery High reliability with low maintenance
Uptimax Ni-Cd battery High reliability with low maintenance June 2008 The Uptimax solution low maintenance for high temperatures Saft s new Uptimax battery offers the ideal low maintenance battery solution.
Repair Parts Sheet IPA-2521 IPE-2505 IPE-2510 IPH-2530 IPH-2531 A UNIT OF APPLIED POWER INC. L1272 Rev. E 11/07
Repair Parts Sheet A UNIT OF APPLIED POWER INC. L7 Rev. E /07 IPA IPE0 IPE0 IPH0 IPH Accessories: Press Conversion Kit IPK0 VBlocks A0 Model Pump Cylinder IPA PAM0 Twin Air Pump RC IPE0 PUJ00B Electric