Stafsjö s ATEX solutions for category 1 D (Zone 20)
|
|
|
- Magdalen Caldwell
- 1 years ago
- Views:
Transcription
1 Stafsjö s ATEX solutions for category 1 D (Zone 20) Data is only for informational purpose. All specifications are subject to change without notice issue 1
2 ATEX solutions for category 1 D (Zone 20) For hazardous areas Stafsjö is able to supply several solutions. This document present knife gate valves and materials to use in ATEX 2014/34/EU II cat 1 D (Zone 20). The valves are also CE marked accordingly. In order to fulfill the CE marking all accessories and actuators must be ATEX classified according to at least the same category as the valve. Manual operated valves are not in the scope of the ATEX directive and therefore excluded in this document. Non-corrosive resistant materials are coated in a conductive colour RAL7001 according to Stafsjö s standard, which fulfill the requirements in EN ISO 1244 class C3. No aluminium is allowed in category 1 why the standard aluminium beams and tie rods are replaced by stainless steel pillars and beams. All valves are pressure tested according EN :200. Further information is presented in each valve data sheet available on Drawing and table A-1 6 6a c b a 6c 6b 6a 6b 6c 6 Atex spring solution valid for all valve types pos A-1 a Pin bolt Stainless steel A2, A4, fzb c Nut Stainless steel A2/A4 66 Contact spring EN Spring holder EN Spring holder EN a Screw Stainless steel A2, A4 6b Washer Stainless steel A2, A4 6c Nut Stainless steel A2, A4 6 Earthing cable PVC covered copper 6a Connecting washer EN b Rivet EN c Cable shoe Top works valid for all valve types 2 Yoke plate for electric maneuver 3 Rising stem for electric man. EN1.4301, EN or Q235 coated with conductive coating EN1.4305, EN1.4016, EN1.4301, 5 Pillars EN1.4436, EN Beams EN1.4301, EN Gate protection EN1.4301, EN Gate clevis EN1.4301, EN1.4404, Clevis pin EN Adapter for pneum. actuator EN issue 1
3 Pressure data MV Maximum working pressure body at 20 C Maximum differential pressure in preferred direction at 20 C Maximum differential pressure in reverse direction at 20 C for seats E/N/V DN bar 1) bar 2) ,5 3, ,0 3, On request 3) 3, On request 4) or 4 Pressure data MP Part list MV and MP 6 Gate MV Gate MV Gland MV Gland MP EN (AISI 304), EN (AISI 316L), EN1.4462, EN1.4547, EN1.452, EN (SAF2507), EN1.443 (317L), Hastelloy C276 EN (AISI 316L), EN JS1050 (GGG50), EN5.3105,, Hastelloy C276, 254 SMO Box packing MV, MP Twin Pack, Graphite, PTFE a Scraper MV PTFE, UHMW-PE 10 Valve body MV Valve body MP 12 Retainer ring MV Retainer ring MP 13 Seat MV Seat MP 14 Gate support, only MP, EN5.3105, A351 (CG3M, EN1.451), Hastelloy C276, ASTM A216 WCB, WCC, JS1050 (GGG50), JL1030 (GG20), 254 SMO EN.1.440, EN1.4470, 254 SMO, ASTM A216 WCB, Hastelloy C276, A351 (CG3M, EN1.451), (317L) EN.1.440, EN Nitrile, EPDM, FKM Black (Viton), Metal/Grafoil, PTFE O-ring Nitrile/ FKM black (Viton)/EPDM PTFE O-ring Nitrile/FKM black (Viton)/EPDM POM-C 2 3 A a ) Valve body supplied in steel 2) Valve body supplied in iron 3) Max 3,0 bar 4) Max 1,0 bar issue 1
4 Pressure data HL Pressure data HG Pressure data HP Pressure data HX Part list HL, HG, HP and HX 6 Gate HL Gate HG Gate HP Gate HX Gland HL Gland HG Gland HP, HX Box packing HL, HG, HP, HX a Scraper HL. HG, HP, HX 10 Valve body HL Valve body HG Valve body HP Valve body HX 12 Retainer ring HL Retainer ring HG Retainer ring HP, HX EN (AISI 316L), EN EN (AISI 316L), EN1.4462, EN1.4547, EN1.452 EN1.4462, EN1.4547, EN1.452 EN (AISI 316L) EN1.4462, EN1.4547, EN1.452 JS1050 (GGG50), EN1.440, EN1.4470, 254 SMO, 254 SMO Twin Pack, Graphite, PTFE PTFE, UHMW-PE, EN5.3105, 254 SMO, A351 (CG3M, EN1.451), Hastelloy C276, ASTM A216 WCC, JL1030 (GG20), EN5.3105, 254 SMO, 254 SMO EN.1.440, EN1.4470, 254 SMO, Hastelloy C276, A351 (CG3M, EN1.451), EN1.443 (317L) EN.1.440, EN1.4470, 254 SMO A Seat HL, HX, HP 14a/b Seat HG Guiding pads HL, HG, HP, HX to original data sheet issue a 14b 16 PTFE with o-ring Nitrile/FKM black (Viton)/EPDM Metal with Grafoil, PTFE with o-ring Nitrile/FKM black (Viton)/EPDM PTFE
5 Pressure data XV Part list XV 6 Gate EN (AISI 316L), EN Gland Box packing Twin Pack, Graphite, PTFE a Scraper PTFE, UHMW-PE 10 Valve body, ASTM A216 WCC, A351 (CG3M, EN1.451) 12 Retainer ring EN.1.440, EN1.4470, EN1.443 (317L), A351 (CG3M, EN1.451) 13 Seat PTFE O-ring Nitrile/FKM black (Viton)/EPDM 2 A issue 1
6 Pressure data WB or or or or 4 Pressure data WB Pressure data WB Design data WB Part list WB, WB11, WB12 and WB14 6 Gate WB, WB11, WB12, WB14 Gland WB, WB11, WB12 Gland WB14 Box packing WB, WB11, WB12, WB14 10 Valve body WB, WB11, WB12 Valve body WB14 13 Seat WB, WB11, WB12, WB14 a Scraper WB, WB11, WB12, WB14 EN (AISI 304), EN (AISI316L), EN ASTM A216 WCB, EN ASTM A216 WCB, EN5.3105, Twin Pack JS1050 (GGG50), EN JS1050 (GGG50), EN5.3105, EPDM, Nitrile UHMW-PE, PTFE or or issue 1
7 Pressure data RKO Maximum working pressure body at 20 C Maximum differential pressure in preferred direction at 20 C , Pressure data JTV Maximum working pressure body at 20 C Maximum differential pressure in preferred direction at 20 C 250 x x Part list RKO and JTV 6 Gate RKO, JTV EN Gland RKO, JTV EN1.440 Box packing RKO Box packing JTV Twin Pack, Graphite, PTFE Twin Pack a Scraper PTFE, UHMW-PE 10 Valve body RKO Valve body JTV 11 Body gasket RKO Body gasket JTV 12 Retainer ring RKO Retainer ring JTV 13 Seat RKO Seat JTV 14a, b Guide strip RKO, JTV EN1.440, EN5.3105, JL1030 (GG20), ASTM 216 WCC EN1.440 Grafoil DN300 PTFE PTFE EN.1.440, JS1050 (GGG50), JL1030 (GG20) EN Metal/Grafoil, PTFE O-ring Nitrile/ FKM black (Viton)/EPDM Polyuerthane POM-C 5b 5a 5 16 A c b a b 10a 11 14a 14b issue 1
8 Pressure data D2G Part list D2G 6 Gate EN (AISI 316L), Gland EN1.440 Box packing Twin Pack 10 Valve body EN Body gasket PTFE 12 Retainer ring EN Seat PTFE O-ring Nitrile/FKM black (Viton)/EPDM 14 Gliding support POM-C issue 1
9 Further information is available on Globally active. Locally represented. AFRICA South Africa: Valve & Automation (Pty) Ltd, ASIA China: Ebro Armaturen (Beijing) co., Ltd, India: Ebro Armaturen India Pvt. Ltd, Indonesia: Contromatic Prima Mandiri PT, Japan: SKC Co. Ltd, Malaysia: Precision Control SdnBnd, Philippines: Ebro Armaturen (Philippines) Inc., South Korea: Sherpa Automation, Thailand: Ebro Valves (Trading) Co. Ltd., Vietnam: Ebro Valves (Thailand) Co., Ltd, AUSTRALIA with OCEANIA Australia: Ebro Armaturen Pacific Pty Ltd, New Zeeland: H.J. Asmuss & Co. Ltd EUROPE Austria: Ebro Armaturen GmbH, Belgium: V.C.T. - Valve & Connector Technology n.v., Denmark: Valtor Industri A/S, Finland: Tecalemit Flow Oy, France: Ebro Armaturen, Germany: Ebro Armaturen Gebr. Bröer GmbH, Great Britain: Ebro Valves Ltd, Hungary: Ebro Armaturen Kft, Ireland: ESI Technologies Ltd., Iceland: Hédinn HF, Italy: Ebro Valvole srl, The Netherlands: Ebro Valves B.V., Norway: Bagges AS, Poland: Ebro Armaturen GmbH, Portugal: AxFlow Comércio de Aquipamentos Lda, Russia: LesBumMash Ltd, Roitech and OOO Hawle Sevkom, Spain: Ebro Armaturen España, S.L., Switzerland: Ebro Armaturen Est. & Co. KG, Sweden: Stafsjö Valves AB and Ahlsell Sverige AB, Turkey: Ebro Armaturen Otomasyon Sistemleri San ve Tic Ltd. Sti, Ukraine: Ebro Armaturen GmbH Representative office Kiev NORTH AMERICA Canada: Armour Valve Ltd, USA: Ebro Armaturen USA Inc. SOUTH AMERICA Argentina: Esco Argentina S.A., Brazil: ELAN Equipamentos Industriais Ltda, Chile: Ebro Stafsjö Valves Chile Ltd For other countries, please contact us directly. Stafsjö Valves AB Phone: A Bröer Group company issue 1 SE-61 5 Stavsjö, Sweden Fax:
Single-acting pneumatic cylinder type ECS
Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder
Knife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9
Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an
Knife gate valve WB11
Knife gate valve WB11 Data is only for informational purpose. All specifications are subject to change without notice. 1 2016-12-28 issue 13 Knife gate valve WB11 Stafsjö's knife gate valve WB11 is bi-directional
Knife gate valve WB14
Knife gate valve WB14 Data is only for informational purpose. All specifications are subject to change without notice. 1 2016-08-19 issue 10 Knife gate valve WB14 Stafsjö's knife gate valve WB14 is bi-directional
Knife gate valve RKO. Data is only for informational purpose. All specifications are subject to change without notice issue 20
Knife gate valve RKO Data is only for informational purpose. All specifications are subject to change without notice. 1 Knife gate valve RKO Stafsjö s knife gate valve RKO is reliable and particularly
Knife gate valve WB14E
Knife gate valve WB14E Data is only for informational purpose. All specifications are subject to change without notice. 1 Knife gate valve WB14E Stafsjö s WB14E knife gate valve is a high performance shut-off
Knife gate valve XV. Data is only for informational purpose. All specifications are subject to change without notice issue: 3
Knife gate valve XV Data is only for informational purpose. All specifications are subject to change without notice. 1 Knife gate valve XV Stafsjö s knife gate valve XV gives a secure and tight shutoff,
Double-acting pneumatic cylinder type EC
Double-acting pneumatic cylinder type Information is only for informational purpose. ll specifications are subject to change without notice. 1 15-03-16 issue: 4 Double-acting pneumatic cylinder type Stafsjö
ISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
BP Statistical Review of World Energy June 2017
BP Statistical Review of World Energy June 217 Primary energy 8 Consumption 8 Consumption by fuel 9 66 th edition Primary energy Consumption* Growth rate per annum Million tonnes oil equivalent 26 27 28
Data sheet Knife gate valve WB PN10 DN
Page: 1(7) Introduction The Stafsjö WB knife gate valve is a bi-directional seated valve with full bore. Its main applications are different liquids at water, waste water and biogas plants. The WB is designed
Total credit to the non-financial sector (core debt), % of GDP Table F1.1
Total credit to the non-financial sector (core debt), % of GDP Table F1.1 2012 2013 2014 2015 2016 Q2 16 Q3 16 Q4 16 Q1 17 Q2 17 Argentina 62.6 66.4 64.6 75.5 75.3 81.7 80.1 75.3 71.6 72.7 Australia 208.0
replacement parts 6.1 General 6.2 Ordering
6.0 Replacement Parts 6.1 General Always provide the serial number of the unit on which the parts will be used. The serial number is stamped on the unit nameplate. 6.2 Ordering To ensure proper operation,
EVOline Socket Modules
203 Protection types in sockets. Colour table Standard-colours To order other colours in RAL-Tones, please contact us. With contact protection Contact protection: Contact socket with child protection (increased
MDM. Magnetic drive pumps Magnetic drive process pump resistant to dry run damage. Magnetic drive pumps. series
MDM series Magnetic drive pumps Magnetic drive process pump resistant to dry run damage Magnetic drive pumps The MDM Series of Magnetic drive process pumps have wetted parts made of fluororesin. Patent
FLANGED REDUCED BORE BALL VALVE, SERIES MBV
FLANGED REDUCED BORE BALL VALVE, SERIES MBV 1 MBV 26 Issue 12/98 DESIGN FEATURES Size range 2" 8". ANSI Class 15 and. Pressure classes Tightness Separate ball and shaft assure low pressure tightness even
Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report. From 2001 to 2021
Global Medium & Heavy Commercial Vehicle Model Level Production Forecast Report From 2001 to 2021 Global CV Markets Covered Industry Production Data Truck & Bus Model Production Forecast Engine Production
NGS. Dual-Magnet Float Switch. Pressure: up to 25 bar. Density: > 0.7 kg/dm 3. High switch capacity. Material: stainless steel 1.
Dual-Magnet Float Switch measuring monitoring analysing NGS Pressure: up to 5 bar O O Medium temperature: up to 50 C Density: > 0.7 kg/dm 3 High switch capacity O O Connection: square flange, DIN flange,
SAMPLE: Wipers intelligence service. Generated: July 11, 2016
SAMPLE: Wipers intelligence service Generated: July 11, 2016 Table of contents Table of contents Introduction... Companies... Denso Corporation... Federal Mogul Corporation... Products... Hella KGaA Hueck
Centering Unit. Alignment and positioning of transferred workpieces. MACM Series. Table. Max. allowable load weight: 2205 lbs (1000 kg) (MACM10)
Centering Unit Alignment and positioning of transferred workpieces Contributes to space saving on conveyor lines Heavy workpieces can now be aligned and positioned with small cylinders, resulting in compact
Photo courtesy of NZTA
international comparisons for road deaths Photo courtesy of NZTA 14 Motor Vehicle Crashes in New Zealand international comparisons for road deaths 141 Contents TABLES Table 1 International comparison of
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
BOLL Automatic Filter TYPE The Compact Design Two-Chamber Filter. BOLL & KIRCH Filterbau GmbH
BOLL Automatic Filter TYPE 6.72 The Compact Design Two-Chamber Filter BOLL & KIRCH Filterbau GmbH THE TASK Perfect pre-treatment In order to ensure that large combustion engines or mechanical processing
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS COUNTRY/JURISDICTION * STATUS 10 NOVEMBER 2017 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013 2. ANDORRA
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS
JURISDICTIONS PARTICIPATING IN THE CONVENTION ON MUTUAL ADMINISTRATIVE ASSISTANCE IN TAX MATTERS COUNTRY/JURISDICTION * STATUS 15 DECEMBER 2017 1. ALBANIA 01-03-2013 (AC) 08-08-2013 01-12-2013 2. ANDORRA
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
STATISTISCHER ANHANG VORLÄUFIGE AUSGABE
OECD-Wirtschaftsausblick Ausgabe 2013/1 OECD 2013 STATISTISCHER ANHANG VORLÄUFIGE AUSGABE Die statistischen Daten für Israel wurden von den zuständigen israelischen Stellen bereitgestellt, die für sie
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA
IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.
KINGDOM OF CAMBODIA NATION RELIGION KING 3
KINGDOM OF CAMBODIA NATION RELIGION KING 3 TOURISM STATISTICS REPORT October 2017 MINISTRY OF TOURISM Statistics and Tourism Information Department No. A3, Street 169, Sangkat Veal Vong, Khan 7 Makara,
exports of goods annual change (%)
12.0 Austria s foreign trade 2015 by world region imports of goods 2015 exports of goods 2015 region 1 1 share (%) share (%) Europe 106,984 80.4 104,032 79.1 EU 93,686 70.4 90,841 69.1 EFTA 8,020 6.0 8,098
exports of goods annual change (%)
12.0 Austria s foreign trade 2016 by world region imports of goods 2016 exports of goods 2016 region 1 1 share (%) share (%) Europe 110,067 81.2 104,271 79.5 EU 96,801 71.4 91,112 69.4 EFTA 7,718 5.7 8,132
KINGDOM OF CAMBODIA NATION RELIGION KING 3
KINGDOM OF CAMBODIA NATION RELIGION KING 3 TOURISM STATISTICS REPORT September 2017 MINISTRY OF TOURISM Statistics and Tourism Information Department No. A3, Street 169, Sangkat Veal Vong, Khan 7 Makara,
No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
IWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN
IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made
The SHK manual chain hoist
0.206 The SHK manual chain hoist The SHK and SHK+ manual chain hoist The SHK manual chain hoist features a wide spectrum of applications, independent of a power supply. The robust, compact construction
Charging and testing unit FPU for Bladder, Piston and Diaphragm Accumulators
Charging and testing unit FPU for Bladder, Piston and Diaphragm Accumulators 1. DESCRIPTION 1.1. FUNCTION The HYDAC charging and testing unit FPU is used to charge accumulators with nitrogen or to check
Summary of debt securities outstanding
Summary of debt securities outstanding All countries........................ 22,695 15,852 6,665 3,427 1,762 Developed countries........................ 16,504 13,087 5,869 2,716 701 Austria 510 173 44
NCP/NCB/NCS. Magnetic Float Switches. for Liquids
Magnetic Float Switches for Liquids measuring monitoring analyzing NCP/NCB/NCS Available Materials: Brass, SS, NBR, Polypropylene, and PVC Maximum Pressure: 400 PSIG Maximum Temperature: 300 F Single Point
Table B1. Advanced Economies: Unemployment, Employment, and Real per Capita GDP (Percent)
Statistical Appendix Table B1. Advanced Economies: Unemployment, Employment, and Real per Capita GDP (Percent) Unemployment Rate 2 Averages 1 1993 2002 2003 12 Advanced Economies 6.8 6.9 6.7 6.5 6.3 5.8
Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators
Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators 1. DESCRIPTION 1.1. FUNCTION The HYDAC charging and testing unit FPU-1 is used to charge accumulators with nitrogen
ACEA Report. Vehicles in use Europe 2017
ACEA Report Vehicles in use Europe 2017 TABLE OF CONTENTS Summary... 2 Vehicles in use in Europe... 3 Passenger cars... 3 Light commercial vehicles... 4 Medium and heavy commercial vehicles... 5 Buses...
Nevro Lead Compatibility
Nevro Lead Compatibility Directions for Use 91131569-01 REV B CAUTION: Federal law restricts this device to sale, distribution and use by or on the order of a physician. Guarantees Boston Scientific Corporation
Next Release: 16 May Next Release: 16 May January
43101 Next Release: 16 May 2018 Next Release: 16 May 2018 January Date of publication: 13 April 2018 TABLE OF CONTENTS Charts 1 Gross consumption of natural gas by OECD region 3 2 Indigenous production
Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators
Universal Charging and Testing Unit FPU-1 for Bladder, Piston and Diaphragm Accumulators 1. Description 1.1. Function The HYDAC charging and testing unit FPU-1 is used to charge accumulators with nitrogen
Extraction arms for every type of application
1 Extraction arms for every type of application 2 Improved workspaces within arm s reach A workspace free from dust, hazardous particles, fumes and exhaust is good in many ways. It improves the working
AlixPartners Automotive Electrification Index. Second Quarter 2017
AlixPartners Automotive Electrification Index Second Quarter 217 AlixPartners Automotive Electrification Index e-range E-RANGE = Sum of electric range of all electric vehicles (EV) sold By automaker, segment,
Mineral Industry. Drive solutions for reclaimers, stackers, bulk conveyors applications
Mineral Industry Drive solutions for reclaimers, stackers, bulk conveyors applications A world specialist in drive systems World leader in the design and production of alternators and motors, Leroy-Somer,
Allen-Bradley 1397 Pulse Encoder Interface Card
Installation Instructions IN Allen-Bradley 1397 Pulse Encoder Interface Card Cat. No. 1397-PE Table of Contents What This Option Provides........................ 1 Where This Option Is Used........................
Global Competitiveness Index Rankings
APPENDIX B Global Competitiveness Index 2017 2018 Rankings The following pages report the GCI 2017 2018 rankings for the three subindexes (Table 1) and their corresponding pillars (Tables 2 4). Detailed
Stainless Steel Cable Ties
Stainless Steel Cable Ties Stainless Steel Cable Ties from Tyco Electronics Ranges Available: Ball Lock coated and uncoated material grade AISI 316 - Smooth entry & easy threading of tie body - Self-locking
Maintenance Instruction for double-acting pneumatic cylinder type EC
Maintenance Instruction for double-acting pneumatic cylinder type EC This maintenance instruction is an instruction for maintenance on the double-acting pneumatic cylinders type EC. The instruction shall
Paddle Flow Monitor Model PSR/PSE
Paddle Flow Monitor for liquids measuring monitoring analysing PSR/PSE Switching ranges: 2.5-4.8... 383-533 p max : 250 bar, t max : 110 C Connection: G ¼... G 1 ½, ¼" NPT... 1 ½" NPT S3 : or stainless
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
MODERNISATION SOLUTIONS. MRM W Line. TIME FOR A FACE-LIFT!
MODERNISATION SOLUTIONS TIME FOR A FACE-LIFT! ADVANCED FEATURES WITTUR SOLUTION FOR MODERNISATION The, Wittur flexible machine roomless electric lift, offers an ideal solution for new lifts in existing
ALLROUNDER 720 H. Distance between tie bars: 720 x 720 mm Clamping force: 3200 kn Injection unit (according to EUROMAP): 1300, 2100, 3200
Facts and figures ALLROUNDER 72 H Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit (according to EUROMAP): 13, 21, 32 www.arburg.com 72 H Machine dimensions 858 2198 max. 385
control & instrumentation solutions The AEL6 series smart electric actuator
control & instrumentation solutions The AEL6 series smart electric actuator E X P E R T I S E S O L U T I O N S S U S T A I N A B I L I T Y 1 A E L 6 AEL6 series Our newly launched smart electric actuator
Chit Chats clients save up to 70% on U.S. and international postage.
ONTARIO RATE CARD 2018 Prices are valid from January 21, 2018 Chit Chats clients save up to 70% on U.S. and international postage. Ship your package to the U.S. as if you were in the U.S. Packages under
Test Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy
Test Probes Test Fixtures INGUN Test Fixtures Change made easy MA 350/F with customized ATS MA350 force up to 300 N up to 160 x 100 mm MA 3xx-series generous and free accessibility MA 360/F with customized
giroflex 63 Stoll Giroflex AG
Reduced to the bare essentials but nonetheless special: the giroflex 63 has an appealing architectural style of design. Its architectural lines give the giroflex 63 an air of independence. The ergonomic
ALLROUNDER 630 H. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 63 H Distance between tie bars: 63 x 63 mm Clamping force: 25 kn Injection unit (acc. to EUROMAP): 8, 13, 21 www.arburg.com 63 H Machine dimensions 858 438 1468 2198 max. 395
Toyota IMV Sales Reach Global 5 Million-unit Mark
Apr. 06, 2012 Toyota IMV Sales Reach Global 5 Million-unit Mark Toyota City, Japan, April 6, 2012 Toyota Motor Corporation (TMC) announces that worldwide cumulative sales of its Innovative International
ALLROUNDER 370 E. Distance between tie bars: 370 x 370 mm Clamping force: 600 kn Injection unit (acc. to EUROMAP): 170, 290.
Facts and figures ALLROUNDER 37 E Distance between tie bars: 37 x 37 mm Clamping force: 6 kn Injection unit (acc. to EUROMAP): 17, 29 www.arburg.com 37 E Machine dimensions 215 122 85 12 33 435 192 245
Wear Resistant Tubing
Wear Resistant Tubing New RoHS 1/ Abrasion: Approx. (Compared with SMC polyurethane tubing TU series) 3 Description Wear resistant tubing TUZ series Polyurethane tubing TU series Maximum abrasion (mm)
ALLROUNDER 320 C GOLDEN EDITION
Facts and figures ALLROUNDER 32 C GOLDEN EDITION Distance between tie bars: 12.6 x 12.6 (32 x 32 mm) Clamping force: 55 tons Injection unit: 2.3 oz, 3.7 oz www.arburg.com 32 C GOLDEN EDITION Machine dimensions
Miggytrac B501. Instruction manual GB Valid for: serial no xxxx
Miggytrac B501 Instruction manual 0463 404 001 GB 20150116 Valid for: serial no. 1501 xxxx TABLE OF CONTENTS 1 SAFETY... 4 2 INTRODUCTION... 6 3 TECHNICAL DATA... 7 4 INSTALLATION... 8 4.1 Assembly...
ALLROUNDER 270 A. Distance between tie bars: 270 x 270 mm Clamping force: 350 kn Injection unit (acc. to EUROMAP): 5, 70, 100.
Facts and figures ALLROUNDER 27 A Distance between tie bars: 27 x 27 mm Clamping force: 35 kn Injection unit (acc. to EUROMAP): 5, 7, 1 www.arburg.com 27 A Machine dimensions 238 122 12 425 254 438 191
ALLROUNDER 270 C GOLDEN EDITION
Facts and figures ALLROUNDER 2 C GOLDEN EDITION Distance between tie bars: 2 x 2 mm Clamping force: 4 kn Injection unit (acc. to EUROMAP):, 1 www.arburg.com 2 C GOLDEN EDITION Machine dimensions 85 33
ALLROUNDER 630 S. Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100.
Facts and figures ALLROUNDER 630 S Distance between tie bars: 630 x 630 mm Clamping force: 2500 kn Injection unit (acc. to EUROMAP): 800, 1300, 2100 www.arburg.com 630 S Machine dimensions 2183 5) 2207
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
820 S. Machine dimensions. Electrical connection. Cooling water connection 850 6) 878 7) 960 5) 113/438 4) ) ) ) )6) )
Facts and figures ALLROUNDER 820 S Distance between tie bars: 820 x 820 mm Clamping force: 4000 kn Injection unit (acc. to EUROMAP): 2100, 3200, 4600 www.arburg.com 820 S Machine dimensions 2250 5) 2342
LPI ranking and scores, 2014
ing and scores, 2014 Germany 1 4.12 100.0 Netherlands 2 4.05 97.6 Belgium 3 4.04 97.5 United Kingdom 4 4.01 96.6 Singapore 5 4.00 96.2 Sweden 6 3.96 94.9 Norway 7 3.96 94.8 Luxembourg 8 3.95 94.4 United
OECD unemployment rate stable at 5.8% in August 2017
OECD unemployment rate stable at 5.8% in August 017 The OECD unemployment rate was stable at 5.8% in August 017, unchanged since May. Across the OECD area, 36.1 million people were unemployed, 3.5 million
NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q1 2015
NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE Q1 2015 ALTERNATIVE FUEL VEHICLE registrations: +28.8% in in first quarter In the first quarter of 2015, total alternative fuel vehicle (AFV) registrations
Table F3.1 TIMSS 4th grade scores by GDP per capita (PPP), GDP per capita (USD) Math score
Table F3.1 TIMSS 4th grade scores by GDP per capita (PPP), 2007 Country GDP per capita (USD) Math score Science score Algeria 7,268 378 354 Armenia 9,607 500 484 Australia 39,694 516 527 Austria 38,303
ALLROUNDER 570 S. Distance between tie bars: x (570 x 570 mm) Clamping force: 176, 220, 242 tons Injection unit: 8.2 oz, 15.3 oz, 29.
Facts and figures ALLROUNDER 57 S Distance between tie bars: 22. x 22. (57 x 57 mm) Clamping force: 176, 22, 22 tons Injection unit: 8.2 oz, 15.3 oz, 29.1 oz www.arburg.com 57 S Machine dimensions 78.7
Allegro Bioprocessing Workstations. Allegro TMBioprocessing Workstations. USD 2793b. The system s support trays are made of a highthe
USD 2793a USD 2793b Allegro TMBioprocessing Workstations Allegro Bioprocessing Workstations To support supportaawide widerange rangeofoffluid fluidmanagement management To applicationswith withallegro
NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE EUROPEAN UNION 1 Q2 2015
NEW ALTERNATIVE FUEL VEHICLE REGISTRATIONS IN THE Q2 2015 New alternative fuel vehicle (AFV) registrations in the EU by engine type Q2 2014 Q2 2015 Thousand units 70 60 50 40 30 20 10 0 EVs HEVs AFVs other
giroflex 64 Stoll Giroflex AG
Over 1.5 million of the giroflex 64 have been sold worldwide. This kind of success is no coincidence this classic chair represents the unification of design and ergonomics at its highest level. The giroflex
MTC. Mold Temperature Control. Consilience Technology
We supply Take-out Robot, Factory Automation, Auxiliary Equipment, Auto Feeding system as an Integrated Engineering Solution provider. Consilience Technology MTC Mold Temperature Control 02 03 Company
PRODUCT INFORMATION. Haldex solutions for tractors and agricultural trailers. Innovative Vehicle Solutions
PRODUCT INFORMATION Haldex solutions for tractors and agricultural trailers Innovative Vehicle Solutions Coupling head Protect-O Red coupling head with filter Protect-O Yellow coupling head with filter
ALLROUNDER 520 A multi-component
Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component
Cleanroom Standards and Updates
Cleanroom Standards and Updates Cleanroom Standards / Environmental Guides FED-STD 209E: Established Sept, 1992: Cancelled November 2001 ISO 14644-1: Established May 1999 (replaces Fed-STD 209E, BS 5295)
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
STAUFF Test. Test Couplings. Test Adaptors. Test Hoses and Connectors. Product Overview
Test Adaptors Test Hoses and Connectors Product Overview STAUFF Test Test couplings from the STAUFF Test product range are already planned in suitable positions in the hydraulic system during the design
Annex. List of tables
Statistical annex Annex List of tables A. 1 Developed economies: rates of growth of real GDP, 2000-2010... 145 A. 2 Economies in transition: rates of growth of real GDP, 2000-2010... 146 A. 3 Developing
ASEAN International Merchandise Trade Statistics Yearbook 2014
International Merchandise Trade Statistics Yearbook 2014 The Secretariat Jakarta The Association of Southeast Asian Nations () was established on 8 August 1967. The Member States of the Association are
RAIL PROFILE RENOVATION
RAILWAY RAIL PROFILE RENOVATION PRECISION AND SERVICE There are several methods of railway re-profiling. The Dynamic milling of rails is one. The objective of the rail re-profiling is to enable modern
ALLROUNDER 820 S Multi-component
Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component
Facts and figures ALLROUNDER 375 V. Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 170, 290.
Facts and figures ALLROUNDER 375 V Vertical free-space system Clamping force: 500 kn Injection unit (acc. to EUROMAP): 100, 1, 290 www.arburg.com 375 V Installation dimensions Vertical version 1050 850
External and intra-european Union trade
ISSN 1606-3481 External and intra-european Union trade Data 2004 09 2010 edition Pocketbooks External and intra-european Union trade Data 2004 09 2010 edition Europe Direct is a service to help you find
2.01 Availability of latest technologies
2.01 Availability of latest technologies To what extent are the latest technologies available in your country? [1 = not available; 7 = widely available] 2010 2011 weighted average RANK COUNTRY/ECONOMY
FLUID REPLACEM Brake fluid and engine coolant (antifreeze and water solution) must be completely replaced at specific intervals. See table below. Your
Routine services SERVICE REQUIREMS Routine services must be carried out throughout the life of the vehicle. Some Range Rover, Range Rover Sport, Range Rover Evoque, Discovery 4/LR4 and Freelander 2/LR2
Overseas Market Conditions of Construction and Mining Equipment
1 Overseas Market Conditions of Construction and Mining Equipment December 17, 2012 Hisashi Shinozuka Senior Executive Officer President of Construction and Mining Marketing Division Komatsu Ltd. 2 1.
ALLROUNDER 470 S Multi-component
Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions
Flow. Oval Wheel Flowmeter Model DOE
Oval Wheel FIowmeter for low and high viscous liquids measuring monitoring analysing DOE Measuring range: 0.5 36 l/h und 1 40 l/min Viscosity range: 1 1000 cp Accuracy: ±1% of reading Material: stainless
INDUSTRIALL GLOBAL UNION FCA-CNH NETWORK MEETING March 2017 Detroit, US
INDUSTRIALL GLOBAL UNION FCA-CNH NETWORK MEETING 14-16 March 2017 Detroit, US IG Metall Situation in the automotive industry 2016 2016 overview IG Metall The world automarket of passenger cars has increased
SEARCHING FOR GROWTH MARKETS. MUSTAFA MOHATAREM Chief Economist, General Motors
SEARCHING FOR GROWTH MARKETS MUSTAFA MOHATAREM Chief Economist, General Motors GLOBAL ECONOMIC AND INDUSTRY OUTLOOK Global auto sales jumped more than 45 percent over the last decade China accounted for
SARA : SYSTEM of AUTOMATIC RECEPTION and ANALYSIS
SARA : SYSTEM of AUTOMATIC RECEPTION and ANALYSIS As an all-time forerunner in the field of grain sampling and technological advance, TOUT POUR LE GRAIN have also been one of the first in the world to
Repair Parts Sheet IPA-2521 IPE-2505 IPE-2510 IPH-2530 IPH-2531 A UNIT OF APPLIED POWER INC. L1272 Rev. E 11/07
Repair Parts Sheet A UNIT OF APPLIED POWER INC. L7 Rev. E /07 IPA IPE0 IPE0 IPH0 IPH Accessories: Press Conversion Kit IPK0 VBlocks A0 Model Pump Cylinder IPA PAM0 Twin Air Pump RC IPE0 PUJ00B Electric
Table of Contents FE Series Features and Benefits
Table of Contents FE Series.................................................................................... -6 Features and Benefits..................................................................................