SCREWS, CHUCKS, RIVETS & DRILL BITS
|
|
- Maurice Norris
- 6 years ago
- Views:
Transcription
1 SCREWS, CHUCKS, RIVETS & RILL BITS PROUCT CATALOG & SUBMITTALS
2 SUPER SABER SELF SCREWS FOR LIGHT TO MEIUM GAUGE esigne for light-to meium-gauge materials, the Super Saber Point offers one-step fastening. Its time saving performance is relate to the saber-sharp piercing point with a fine-cut machine threa, which pierces the metal upon contact. Once pierce, the threa propels the screw through metal rapily an almost without effort. They are quality teste through two strips of.024 steel. Zinc-plate High Hea also available Threa is esigne to pull the screw through steel with no strip-out Super sharp, specially harene, non-walking point No metal filings to clog rill chuck Precision forme point for consistant performance SUPER SABER SCREWS FIVE 5 GALLON (BSAB) EC. # # # # # QTY. # QTY. # QTY. 6 x 3/8 1/4.044 in N/A N/A TH TH N/A N/A 7 x 1/2 1/4.044 in N/A TH TH N/A N/A 8 x 1/2 1/4.044 in N/A TH TH N/A N/A 8 x 3/4 1/4.044 in N/A TH TH TH 8 x 1 1/4.044 in N/A TH TH N/A N/A 8 x 1-1/2 1/4.044 in TH TH N/A N/A 8 x 2 1/4.044 in TH TH N/A N/A 8 x 2-1/2 1/4.044 in N/A N/A N/A N/A N/A TH N/A N/A 8 x 3 1/4.044 IN TH TH N/A N/A 10 x 1/2 1/4.044 in N/A N/A TH TH N/A N/A 10 x 3/4 1/4.044 in N/A TH TH N/A N/A 10 x 1 1/4.044 in N/A TH TH N/A N/A PAGE 2 SCREWS, CHUCKS, RIVETS & RILL BITS PROUCT CATALOG
3 SUPER SABER SELF SCREWS (CONTINUE) SPECIAL 5/16 HEA SUPER SABER SCREWS FIVE EC. # # # # # QTY. # QTY. 10 x 1/2 BH 5/ in TH TH 10 x 3/4 BH 5/ in N/A TH TH 10 x 1 BH 5/ in TH TH SPECIAL WHITE PAINTE SUPER SABER SCREWS FIVE EC. # # # # # QTY. # QTY. 8 x 2 1/4.044 in TH TH HIGH HEA SUPER SABER SCREWS High Hea Super Sabers have the highest hea in the inustry. The high hea stays in the chuck with ease an provies stability uring insertion. HIGH HEA SUPER SABER SCREWS FIVE 2 GALLON PAIL (BKSAB) EC. # # # # # QTY. # QTY. # QTY. 8HH x 1/2 1/4.044 in TH TH N/A N/A 8HH x 3/4 1/4.044 in TH TH N/A N/A 8HH x 1 1/4.044 in TH TH N/A N/A 8HH x 1-1/2 1/4.044 in TH TH N/A N/A 8HH x 2 1/4.044 in TH TH N/A N/A 10HH x 3/4 1/4.044 in TH TH TH SPECIAL 5/16 HIGH HEA SUPER SABER SCREWS FIVE 2 GALLON PAIL (BKSAB) EC. # # # # # QTY. # QTY. # QTY. 10HH x 3/4BH 5/ in TH TH TH Bulk Packs* Hunre Packs SUPER SABER SCREW AGING Thousan Pack Two-Fifty Pack Five Hunre Pack Pail Pack* SCREWS, CHUCKS, RIVETS & RILL BITS PROUCT CATALOG PAGE 3
4 PRO POINT SELF RILLING SCREWS FOR HEAVY GAUGE Pro-Point Screws, with a precision forme rill point, are esigne to fasten heavy gauge metals. These screws assure accurately size holes for maximum holing power, eliminating the nee for hole preparation an frequent alignment problems encountere in parts assembly. Ieal for fastening 4-bolt flange to uctwork. Pro Point Screws are quality teste through 1/8 col rolle steel. Zinc-plate High Hea also available Threa is esigne to pull the screw through steel with no strip-out Sharp, non-walking point Serrate ege to prevent the backing out of the screw Precision forme rill point for faster penetration with less effort PRO POINT SCREWS RILL PT. RILL (PPC) FIVE (PPF) (PPT) (PPP) (PPB) EC. # # # # QTY. # QTY. 8 x 1/2 1/ in TH TH 8 x 5/8 1/ in N/A TH TH 8 x 3/4 1/ in TH TH 8 x 1 1/ in TH TH 10 x 1/2 5/ in TH TH 10 x 5/8 5/ in N/A TH TH 10 x 3/4 5/ in TH TH 10 x 1 5/ in TH TH 12 x 3/4 5/ in N/A TH TH RILL PT. PRO POINT SCREWS WITH NEOPRENE WASHER RILL (PPC) FIVE (PPF) (PPT) (PPP) (NTAB) EC. GA. # # # # QTY. # QTY. 10 x 1 5/ N/A N/A N/A N/A N/A TH PAGE 4 SCREWS, CHUCKS, RIVETS & RILL BITS PROUCT CATALOG
5 PRO POINT SELF RILLING SCREWS (CONTINUE) HIGH HEA PRO POINT SCREWS High Hea Pro Points have the highest hea in the inustry. The high hea stays in the chuck with ease an provies stability uring insertion. HIGH HEA PRO POINT SCREWS RILL PT. RILL (PPC) FIVE (PPF) (PPT) (PPP) (PPB) 2 GALLON PAIL (BKTAB) EC. GA. # # # # QTY. # QTY. # QTY. 8HH x 3/4 1/ TH TH N/A N/A 10HH x 3/4 5/ TH TH TH 10HH x 1-1/2 5/ N/A N/A N/A N/A TH N/A N/A HIGH HEA PRO POINT SCREWS WITH NEOPRENE WASHER RILL PT. RILL (PPC) FIVE (PPF) (PPT) (PPP) (NTAB) EC. GA. # # # # QTY. # QTY. 10HHx 3/4 5/ N/A N/A N/A N/A N/A TH 10HH x 1-1/2 5/ N/A N/A N/A N/A N/A TH STAINLESS STEEL HIGH HEA PRO POINT SCREWS (410 SERIES STAINLESS) RILL PT. RILL (PPC) FIVE (PPF) (PPT) (PPP) (PPB) EC. GA. # # # # QTY. # QTY. 10HHx 3/4 5/ TH TH PRO POINT SCREW AGING Bulk Packs* (PPB) Five Hunre Pack (PPF) Thousan Pack (PPT) Pail Pack* (PPP) Item# SA1 - Shop Apron Hunre Packs (PPC) *Quantities per pail an bulk carton vary per screw size. The uro yne Shop Apron is perfect for holing screws & rill chucks while on the job! SCREWS, CHUCKS, RIVETS & RILL BITS PROUCT CATALOG PAGE 5
6 SCREW IMENSIONS SUPER SABER IMENSIONS AN TORSIONAL SPECIFICATIONS OF SELF- AN THREAING SCREWS THREAS MINIMUM PER INCH MAJOR IAMETER MINOR IAMETER TORSIONAL STRENGTH (LB. IN.) MAX MIN MAX MIN PRO POINT IMENSIONS AN TORSIONAL SPECIFICATIONS FOR SELF-RILLING TAPPING SCREWS MINIMUM OR NOMINAL SCREW THREAS PER INCH MAJOR IAMETER MINOR IAMETER TORSIONAL STRENGTH IAMETER MAX MIN MAX MIN (LB. IN.) / SCREW INSTALLATION ELECTRIC RILL Use 1/4 capacity low torque rill with spee from RPM. #8 an #10 Pro Point screws can be installe up to 3600 rpm. RILL CHUCK uro yne 1/4 an 5/16 socket sizes are esigne with a heavy-uty magnet to hol screws securely in position an are able to withstan the impact of usage without unue wear. SCREW LENGTH FOR SUPER SABERS Must be sufficient to engage multiple layers of metal being fastene. With two pieces of light-gage metal, unsupporte back piece may push away uner pressure. Screw length must be long enough to engage back piece of metal. SCREW LENGTH FOR PRO POINTS rill point length must excee total thickness of material to be fastene incluing gaps. Threa length must also excee combine material thickness. RILL POINT LENGTH MUST EXCEE TOTAL THICKNESS Top material to be rille rille or punche top material TECHNIQUE Set screw in the chuck, press the point firmly against the metal, an start the rill. As the screw bites into the metal, release the trigger to allow the rill momentum to seat the screw without stripping. Heavier gages of metal require greater pressure. Thickness to be rille Bottom material to be rille PAGE 6 SCREWS, CHUCKS, RIVETS & RILL BITS PROUCT CATALOG
7 RILL SCREW CHUCKS Super har, yet shock resistant, uro yne Chucks outperform all others. A strong, permanent magnet hols the screw firmly in position. A precision hex hole resists the reaming effect of the screw hea uring extene usage. FOR SCREW HEA OVERALL LENGTH E 1 PER CAR, 10 CARS PER SLEEVE E 100 PER CTN # COE # COE 1/4 1-3/ C C14B 5/16 1-3/ C C516B 1/4 2-5/ CL CL14B 5/16 2-5/ CL CL516B FOR SCREW HEA OVERALL LENGTH E 1 PER E 100 PER CTN # COE # COE 1/ CXL CXL14B 5/ CXL CXL516B RILL BITS HOT ROLLE FORGE Fast Cutting - Fast Starting 135º split point starts the hole where you place it. The rill oes not walk, mar metal, or waste time. Long Wearing - Extra Har Specially harene high spee steel makes Super T rill Bits harer an longer wearing than others. This same steel/ processing combination allows bits to withstan the stress of tortional twisting. Heavy Web Reuces Breakage Web is the portion which is soli steel from point to shank. Super- T has heavier web than orinary bits. This means more flexibility, less breakage. TWIN EN RILL BITS OVERALL LENGTH E 10 PER E 100 PER CTN # COE # COE 1/ TE1/ TEB1/8 # TE# TEB#30 SUPER-T RILL BITS ECIMAL E 10 PER POUCH E 100 PER BOX EQUIVALENT # ESCRIPTION # ESCRIPTION 1/ T1/ TB1/8 # T TB30 9/ T9/ TB9/64 5/ T5/ TB5/32 3/ T3/ TB3/16 # T TB11 7/ T7/ TB7/32 1/ T1/ TB1/4 9/ T9/ TB9/32 SCREWS, CHUCKS, RIVETS & RILL BITS PROUCT CATALOG PAGE 7
8 PIN RIVETS Pin Rivets are strong, hollow rivets assemble onto a soli manrel. They are manufacture to strict quality control stanars an are available in a wie range of sizes an styles to provie the proper rivet for every type of application. Pin Rivets are inserte an set from the same sie. They are particularly practical where there is no access to the reverse sie of the work. PIN RIVETS ESCRIPTION TEN # COE # COE STEEL RIVET/STEEL PIN SS42T SS42B STEEL RIVET/STEEL PIN SS44T SS44B STAINLESS RIVET/STAINLESS PIN XX42T XX42B STAINLESS RIVET/STAINLESS PIN XX44T XX44B STAINLESS RIVET/STEEL PIN XS42T XS42B STAINLESS RIVET/STEEL PIN XS44T XS44B ALUMINUM RIVET/STEEL PIN AS42T AS42B ALUMINUM RIVET/STEEL PIN AS44T AS44B COPPER RIVET/COPPER PLATE PIN CC42T CC42B COPPER RIVET/COPPER PLATE PIN CC44T CC44B ALUMINUM RIVET/ALUMINUM PIN AA42T AA42B ALUMINUM RIVET/ALUMINUM PIN AA44T AA44B Part 1 Part 2 Part 3 Part 4 Part 5 Part 6 Rivet Material Pin Material Rivet iam. (in 32ns of an inch) S=Steel A=Aluminum C=Copper X=Stainless Steel S=Steel A=Aluminum C=Copper (Coate Steel) X=Stainless Steel 3 = 3/32 4 = 1/8 5 = 5/32 6 = 3/16 8 = 1/4 RIVET COES Maximum Grip (in 16ths of an inch) 1 = 1/16 2 = 1/8 3 = 3/16 4 = 1/4 5 = 5/16 6 = 3/8 8 = 1/2 10 = 5/8 Rivet Hea Style =ome Quantity B=Bulk T=Thousan Coe No. S S 4 1 B Example Part 6 - Quantity (Bulk) Part 5 - Rivet Hea Style (ome) Part 4 - Maximum Grip (1/16 ) Part 3 - Rivet iameter (1/8 ) Part 2 - Pin Material (Steel) Part 1 - Rivet Material (Steel) RIVET TOOL The Rivet Tool is use for setting all popular iameter blin rivets. You nee only to select an insert the proper nozzle to accommoate the rivet iameter. Pass thru Manrel jaw allows for both front or back nail ejection. Ergonomic hanles Hanle Lock Clip Constructe of harene Steel for longer life Compact nose esign for har to reach places. 4 Inclue nose pieces 3/32, 1/8, 5/32, 3/16 with wrench inclue High Leverage hanles for more power an easier operation 25:1 mechanical avantage # COE ESCRIPTION PR6 Rivet Tool uro yne East ivision, Bay Shore, NY Fax: uro yne Miwest ivision, Fairfiel, OH Fax: uro yne West ivision, Fontana, CA Fax: uro yne Canaa, Lachine, Quebec, Canaa Fax: uroyne@uroyne.com uro yne Corp. Printe in USA 8/16 BB008402
9 SUBMITTAL RECOR JOB LOCATION SUBMITTE TO SUBMITTAL PREPARE BY APPROVE BY ATE Submittal Form Super Saber Screws ESCRIPTION Several common methos such as rivets, screws, an spot weling are use to fasten materials to uctwork. Three types of screws are most often use. The first is self-tapping only an requires a hole to be rille before the screw can be utilize. The others are both self-tapping but also create their own holes. Selfpiercing screws have very sharp points which act much like a scratch awl in making a small opening in the steel for the threas to engage an work the sheet metal into a cone threae hole. These work well for light gage steel. SUGGESTE SPECIFICATIONS Self-piercing an threaing screws shall meet or excee Japanese Inustrial Stanar JIS1125 an shall be coe size as supplie by uro yne Corporation. SCREW FEATURES Conformance - Meets or excees JIS 1125 specifications for cone point screws Material - Col heaing quality steel wire Corrosion Resistance - Zinc plate Harness - Case harene to Rockwell C55 minimum Hea Configuration - Hexagonal slotte Twin lea point (two continuous threas) SUPER SABER SCREWS FIVE- 5 GALLON (BSAB) EC. # # # # # QTY. # QTY. # QTY. 6 x 3/8 1/4.044 in N/A N/A TH TH N/A N/A 7 x 1/2 1/4.044 in N/A TH TH N/A N/A 8 x 1/2 1/4.044 in N/A TH TH N/A N/A 8 x 3/4 1/4.044 in N/A TH TH TH 8 x 1 1/4.044 in N/A TH TH N/A N/A 8 x 1-1/2 1/4.044 in TH TH N/A N/A 8 x 2 1/4.044 in TH TH N/A N/A 8 x 2-1/2 1/4.044 in N/A N/A N/A N/A N/A TH N/A N/A 8 x 3 1/ TH TH N/A N/A 10 x 1/2 1/4.044 in N/A N/A TH TH N/A N/A 10 x 3/4 1/4.044 in N/A TH TH N/A N/A 10 x 1 1/4.044 in N/A TH TH N/A N/A TH = Thousan uro yne East ivision, Bay Shore, NY Fax: uro yne Miwest ivision, Fairfiel, OH Fax: uro yne West ivision, Fontana, CA Fax: uro yne Canaa, Lachine, Quebec, Canaa Fax: uroyne@uroyne.com 2016 uro yne Corporation Printe in USA 08/2016 BO
10 SPECIAL 5/16 HEA SABER SCREWS FIVE- EC. # # # # # QTY. # QTY. 10 x 1/2 BH 5/ in TH TH 10 x 3/4 BH 5/ in N/A TH TH 10 x 1 BH 5/ in TH TH SPECIAL WHITE PAINTE SABER SCREWS FIVE- EC. # # # # # QTY. # QTY. 8 x 2 1/4.044 in TH TH TH = Thousan IMENSIONS AN TORSIONAL SPECIFICATIONS OF SELF- AN THREAING SCREWS Size Threas per Inch Major iameter Minor iameter Max Min Max Min Minimum Torsional Strength (lb. in.) A sampling from every ski of uro yne screws is rigorously teste in house. The uro yne screw stanars excee the IFI publishe stanars for consistency an quality in form an function. Our screws are esigne an manufacture uner the strictest QC guielines, to ensure we have the highest quality an most consistent screws offere to the inustry. uro yne East ivision, Bay Shore, NY Fax: uro yne Miwest ivision, Fairfiel, OH Fax: uro yne West ivision, Fontana, CA Fax: uro yne Canaa, Lachine, Quebec, Canaa Fax: uroyne@uroyne.com 2016 uro yne Corporation Printe in USA 03/2016 BO
11 SUBMITTAL RECOR JOB LOCATION SUBMITTE TO SUBMITTAL PREPARE BY APPROVE BY ATE Submittal Form High Hea Super Saber Screws ESCRIPTION Several common methos such as rivets, screws, an spot weling are use to fasten materials to uctwork. Three types of screws are most often use. The first is self-tapping only an requires a hole to be rille before the screw can be utilize. The others are both self-tapping but also create their own holes. Selfpiercing screws have very sharp points which act much like a scratch awl in making a small opening in the steel for the threas to engage an work the sheet metal into a cone threae hole. These work well for light gage steel. SUGGESTE SPECIFICATIONS Self-piercing an threaing screws shall meet or excee Japanese Inustrial Stanar JIS1125 an shall be coe size as supplie by uro yne Corporation. SCREW FEATURES Conformance - Meets or excees JIS 1125 specifications for cone point screws Material - Col heaing quality steel wire Corrosion Resistance - Zinc plate Harness - Case harene to Rockwell C55 minimum Hea Configuration - Hexagonal slotte Twin lea point (two continuous threas) # HIGH HEA SUPER SABER SCREWS # FIVE # # 2 GALLON PAIL (BKSAB) EC. # QTY. # QTY. # QTY. 8HH x 1/2 1/4.044 in TH TH N/A N/A 8HH x 3/4 1/4.044 in TH TH N/A N/A 8HH x 1 1/4.044 in TH TH N/A N/A 8HH x 1-1/2 1/4.044 in TH TH N/A N/A 8HH x 2 1/4.044 in TH TH N/A N/A 10HH x 3/4 1/4.044 in TH TH TH SPECIAL 5/16 HIGH HEA SUPER SABER SCREWS FIVE 2 GALLON PAIL (BKSAB) EC. # # # # # QTY. # QTY. # QTY. 10HH x 3/4BH 5/ in TH TH TH TH= Thousan IMENSIONS AN TORSIONAL SPECIFICATIONS OF SELF- AN THREAING SCREWS Size Threas Minimum Torsional Major iameter Minor iameter per Inch Strength (lb. in.) Max Min Max Min A sampling from every ski of uro yne screws is rigorously teste in house. The uro yne screw stanars excee the IFI publishe stanars for consistency an quality in form an function. Our screws are esigne an manufacture uner the strictest QC guielines, to ensure we have the highest quality an most consistent screws offere to the inustry. uro yne East ivision, Bay Shore, NY Fax: uro yne Miwest ivision, Fairfiel, OH Fax: uro yne West ivision, Fontana, CA Fax: uro yne Canaa, Lachine, Quebec, Canaa Fax: uroyne@uroyne.com 2016 uro yne Corporation Printe in USA 08/2016 BO006002
12 SUBMITTAL RECOR JOB LOCATION SUBMITTE TO SUBMITTAL PREPARE BY APPROVE BY ATE ESCRIPTION Several common methos such as rivets, screws, an spot weling are use to fasten materials to uctwork. Three types of screws are most often use. The first is self-tapping only an requires a hole to be rille before the screw can be utilize. The others are both self-tapping but also create their own holes. Self-piercing screws have very sharp points which act much like a scratch awl in making a small opening in the steel for the threas to engage an work the sheet metal into a cone threae hole. These work well for light gage steel. Self-rilling screws have an integral rill point which creates a large hole for tapping. This allows the screws to be use on heavy gages of steel. The maximum total thickness of steel that the self-rilling screw can be use with is etermine by the rill point. Submittal Form Pro Point Screws SUGGESTE SPECIFICATIONS Self-rilling an tapping screws shall meet or excee Inustrial Fasteners Institute stanar IFI-113 an shall be coe size as supplie by uro yne Corporation. SCREW FEATURES Conformance - Meets or excees IFI-113 (Revise: August 1, 2007) specifications for Type BS screws Material - Col heaing quality steel wire Corrosion Resistance - Zinc plate Harness - Case harene to Rockwell C52-58 Hea Configuration - Hexagonal unslotte RILL PT. PRO POINT SCREWS RILL FIVE (PPC) (PPF) (PPT) EC. # # # # QTY. # QTY. 8 x 1/2 1/ in TH TH 8 x 5/8 1/ in N/A TH TH 8 x 3/4 1/ in TH TH 8 x 1 1/ in TH TH 10 x 1/2 5/ in TH TH 10 x 5/8 5/ in N/A TH TH 10 x 3/4 5/ in TH TH 10 x 1 5/ in TH TH 12 x 3/4 5/ in N/A TH TH TH = Thousan IMENSIONS OF THREAS AN POINTS FOR SELF-RILLING TAPPING SCREWS Nominal Size or Minimum Basic Screw Threas per Inch Major iameter Minor iameter Torsional Strength iameter Max Min Max Min (lb. in.) / A sampling from every ski of uro yne screws is rigorously teste in house. The uro yne screw stanars excee the IFI publishe stanars for consistency an quality in form an function. Our screws are esigne an manufacture uner the strictest QC guielines, to ensure we have the highest quality an most consistent screws offere to the inustry. uro yne East ivision, Bay Shore, NY Fax: uro yne Miwest ivision, Fairfiel, OH Fax: uro yne West ivision, Fontana, CA Fax: uro yne Canaa, Lachine, Quebec, Canaa Fax: uroyne@uroyne.com 2016 uro yne Corporation Printe in USA 03/2016 BO006000
13 SUBMITTAL RECOR JOB LOCATION SUBMITTE TO SUBMITTAL PREPARE BY APPROVE BY ATE Submittal Form High Hea Pro Point Screws ESCRIPTION Several common methos such as rivets, screws, an spot weling are use to fasten materials to uctwork. Three types of screws are most often use. The first is self-tapping only an requires a hole to be rille before the screw can be utilize. The others are both self-tapping but also create their own holes. Self-piercing screws have very sharp points which act much like a scratch awl in making a small opening in the steel for the threas to engage an work the sheet metal into a cone threae hole. These work well for light gage steel. Self-rilling screws have an integral rill point which creates a large hole for tapping. This allows the screws to be use on heavy gages of steel. The maximum total thickness of steel that the self-rilling screw can be use with is etermine by the rill point. SUGGESTE SPECIFICATIONS Self-rilling an tapping screws shall meet or excee Inustrial Fasteners Institute stanar IFI-113 an shall be coe size as supplie by uro yne Corporation. SCREW FEATURES Conformance - Meets or excees IFI-113 (Revise: August 1, 2007) specifications for Type BS screws Material - Col heaing quality steel wire Corrosion Resistance - Zinc plate Harness - Case harene to Rockwell C52-58 Hea Configuration - Hexagonal unslotte RILL PT. RILL HIGH HEA PRO POINT SCREWS (PPC) # FIVE (PPF) # (PPT) # (PPP) (PPB) 2 GALLON PAIL (BKTAB) EC. GA. # QTY. # QTY. # QTY. 8HH x 3/4 1/ TH TH N/A N/A 10HH x 3/4 5/ TH TH TH 10HH x 1-1/2 5/ N/A N/A N/A N/A TH N/A N/A TH = Thousan IMENSIONS OF THREAS AN POINTS FOR SELF-RILLING TAPPING SCREWS Nominal Size or Minimum Threas per Basic Screw Inch Major iameter Minor iameter Torsional Strength iameter (lb. in.) Max Min Max Min / A sampling from every ski of uro yne screws is rigorously teste in house. The uro yne screw stanars excee the IFI publishe stanars for consistency an quality in form an function. Our screws are esigne an manufacture uner the strictest QC guielines, to ensure we have the highest quality an most consistent screws offere to the inustry. uro yne East ivision, Bay Shore, NY Fax: uro yne Miwest ivision, Fairfiel, OH Fax: uro yne West ivision, Fontana, CA Fax: uro yne Canaa, Lachine, Quebec, Canaa Fax: uroyne@uroyne.com 2016 uro yne Corporation Printe in USA 03/2016 BO006003
14 SUBMITTAL RECOR JOB LOCATION SUBMITTE TO SUBMITTAL PREPARE BY APPROVE BY ATE ESCRIPTION Several common methos such as rivets, screws, an spot weling are use to fasten materials to uctwork. Three types of screws are most often use. The first is self-tapping only an requires a hole to be rille before the screw can be utilize. The others are both self-tapping but also create their own holes. Self-piercing screws have very sharp points which act much like a scratch awl in making a small opening in the steel for the threas to engage an work the sheet metal into a cone threae hole. These work well for light gage steel. Self-rilling screws have an integral rill point which creates a large hole for tapping. This allows the screws to be use on heavy gages of steel. The maximum total thickness of steel that the self-rilling screw can be use with is etermine by the rill point. Submittal Form Pro Point Screw with Neoprene Washer (NTAB) SUGGESTE SPECIFICATIONS Self-rilling an tapping screws shall meet or excee Inustrial Fasteners Institute stanar IFI-113 an shall be coe size as supplie by uro yne Corporation. SCREW FEATURES Neoprene Washer Conformance - Meets or excees IFI-113 (Revise: August 1, 2007) specifications for Type BS screws Material - Col heaing quality steel wire Corrosion Resistance - Zinc plate Harness - Case harene to Rockwell C52-58 Hea Configuration - Hexagonal unslotte RILL PT. PRO POINT SCREWS WITH NEOPRENE WASHER RILL # FIVE # # EC. GA. # QTY. # QTY. 10 x 1 5/ N/A N/A N/A N/A N/A TH RILL PT. HIGH HEA PRO POINT SCREWS WITH NEOPRENE WASHER RILL # FIVE # # EC. GA. # QTY. # QTY. 10HHx 3/4 5/ N/A N/A N/A N/A N/A TH 10HH x 1-1/2 5/ N/A N/A N/A N/A N/A TH TH = Thousan IMENSIONS OF THREAS AN POINTS FOR SELF-RILLING TAPPING SCREWS Nominal Size or Basic Screw iameter Threas per Inch Minimum Major iameter Minor iameter Torsional Strength Max Min Max Min (lb. in.) / A sampling from every ski of uro yne screws is rigorously teste in house. The uro yne screw stanars excee the IFI publishe stanars for consistency an quality in form an function. Our screws are esigne an manufacture uner the strictest QC guielines, to ensure we have the highest quality an most consistent screws offere to the inustry. uro yne East ivision, Bay Shore, NY Fax: uro yne Miwest ivision, Fairfiel, OH Fax: uro yne West ivision, Fontana, CA Fax: uro yne Canaa, Lachine, Quebec, Canaa Fax: uroyne@uroyne.com 2016 uro yne Corporation Printe in USA 08/2016 BO006004
Manual Applications. Tapping attachments for manual tapping application.
Manual Applications Tapping attachments for manual tapping application RX Newest series for high prouction with heavy uty ball clutch. Tapping attachments for rilling an milling machines an pneumatic,
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More information60.08 Style 233S Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33S Restraine Flexible Coupling Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33S stainless steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
More informationThe Ideal Locking Devices For Shaft-to-Hub Connections. Proven Design. Easy To Use
C-ROM Sizing Software ETP Keyless Shaft Mount Connections The Ieal ocking evices For Shaft-to-Hub Connections. ETP Connections are ieal for positioning an locking shaft components in a system. They are
More informationMETAL DRILL BITS STRONGER THAN STEEL HAMMER DRILL BITS CHISEL METAL DRILL BITS WOOD DRILL BITS SAWS ASSORTMENTS MODULES - SHELVES
STRONGER THAN STEEL RILL 307 HSS-E IN 338 cobalt 76 79 311 HSS TIN IN 338 steel rill bit 80 81 302 HSS IN 338, groun, split point 82 85 300 HSS IN 338, stanar 86 90 300 HSS IN 338, stanar, shank reuce
More informationRexnord Tollok Locking Assemblies
Tollok Catalog ownloa the most up-to-ate version at www.rexnor.com/ocumentation Rexnor Tollok Locking Assemblies Why Choose Rexnor Tollok Locking Assemblies? Why Choose Rexnor? When it comes to proviing
More informationPRODUCTS FOR THE HYDRAULICS INDUSTRY
PROUCTS FOR THE HYRAULICS INUSTRY SPIRALGUAR SPIRALGUAR High Performance Hose an Cable Protection How to calculate quantity: Outsie iameter of hose Length (m) of hose Insie iameter of Spiralguar X to be
More informationMetal drill bits. Stronger than steel. Nothing stops the metal drill bits because we offer a drill bit for every application. HSS-E twist drill bit
HSS-E IN 338 cobalt 72-75 HSS IN 338 groun 76-79 HSS IN 338 stanar 80-84 HSS IN 338 stanar, shank reuce 85 HSS IN 340 86 HSS IN 1869 87 HSS hollow section rill bit / facae rill bit 88 HSS IN 345 89-90
More informationPinzBOHR High Precision Boring Tools
PinzBOHR High Precision Boring Tools What to expect from our boring tools. Our European mae boring tools have been proven worl wie to be among the best you can buy. Machinists love our boring tools because
More information60.07 Style 233 Restrained Flexible Coupling For Dynamic Joint Deflection
Style 33 Restraine Flexible Coupling For Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 33 carbon steel restraine couplings (formerly Depen-O-Lok FxF Moifie) provie a fully restraine, flexible pipe
More informationCATALOG 2017 SERIES 1
CTLOG 2017 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series
More informationBimetal thermometers Index
Inex eneral information Prouct information With brass pocket page Inex 685 Brass pocket; Aluminium case 686 Brass pocket; 687 With brass probe page Brass probe; Aluminium case; Air uct thermometer 688
More informationSpot Welder OWNER S MANUAL SPOT WELDER MODELS TSP-1/TSP-2/TBW
Spot Welder Spotwe SPOT WELDER MODELS TSP-1/TSP-2/TBW Owner s Manual for TSP1: SN# 21810 and higher TSP2: SN# 30898 and higher TBW: SN# 41002 and higher Approx: August 13 to Present OWNER S MANUAL MACHINERY
More information60.03 Style 231 Non-Restrained Flexible Expansion Coupling
Style 31 Non-Restraine Flexible Victaulic Bolte Split-Sleeve Proucts (VBSP) Style 31 carbon steel expansion couplings (formerly Depen-O-Lok FxE) provie a non-restraine, flexible pipe joint that is esigne
More informationTUBE INSERTS. Your Guide To Finding the right Tube Gauge size: Ribbed Square Inserts
TUBE INSERTS Your Guie To Fining the right Tube Gauge size: Tube Gauge Calculation Metal tubes are available in various tube gauges, although the most commonly use in furniture manufacture range from 10
More informationPipe and Flange Protection
Pipe an Flange Protection Pipe Caps 78-82 Pipe Plugs 82-83 Flange Protection 84-89 77 Protect! Pipe an Flange Protection Moss offer a wie range of Plastic Protection Proucts for pipes an flanges. Our range
More informationCONTROL HANDWHEELS CONTROL HANDWHEELS
CONTROL HANWHEELS 2 ART. 205 TWO SPOKE CONTROL HANWHEEL Reinforce an stabilise polyamie. Oils an greases resistant. HANWHEEL COLOUR: CENTRAL CAP: Grey polyamie (RAL 7035 coe 13). ALTERNATIVE CAP COLOUR:
More informationFOR EVERYTHING ENCLOSURE
FOR EVERYTHING ENCLOSURE PVC EDGE PROTECTOR Provies excellent protection for steel eges 9 styles available Simple to install SEE PAGES 498-499 DRAWER SLIDES Available in light, meium an heavy uty Full
More informationROLLER CHAIN SPROCKETS
ROLLER CHAIN PROCKE ypes an Materials Correct engagement between roller chain an sprocket is require for smooth transmission of roller chain. Appropriate selection of number of teeth (spee ratio), center-to-center
More information/00 RK INOX 10/16 EN RIVKLE. Stainless steel blind rivet nuts and studs
999000000400 RK INOX 10/16 EN RIVKE tainless steel blin rivet nuts an stus RIVKE tainless steel Contents Page RIVKE tainless steel New prouct range 3 New thin hea esign 4 ubricate RIVKE range 5 RIVKE tu
More informationInventory Article No. Precision mm 0.01mm 35um 386g. Precision A
DIAL INDICATORS Large Range Dial Inicators Unit:mm Stanar No. : GB/T6311-2004 Measuring Grauation Main Dimension Precision Weight Range Value Coe Coe Coe 1014010150 0-50mm 0.01mm 35um 386g DIAL INDICATORS
More informationLive Centers. High Speed Steel Main Line
ive enters igh Spee Steel Main ine MIN-IN: Reliable top of the range live center for N an conventional lathes, an grining machines With over-pressure security through isc springs oy an spinle moels: SM
More informationQuick-change adapters, positive drive inch sizes
P Quick-change aapters, positive rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable
More informationRod ends, series K (wide version), internal and external thread. Rod ends, series E (slim version), internal and external thread
Ro Ens an Spherical earings Overview Ro ens, series K (wie version), internal an external threa Page Maintenance free, plastic Ø 5-20mm... Lubricateable (S), steel Ø 2-40mm... Maintenance free (T), steel
More informationBuilt for Speed. Pinzbohr High Precision Boring Tools. Pinzbohr Modular Boring System. BohrSTAR Boring Kits. Rough and Finish Boring Heads
Pinzbohr High Precision Boring Tools BohrSTAR Boring Kits Rough an Finish Boring Heas Boring Hea Toolholers Carbie an HSS Boring Bars Built for Spee. BohrSTAR High Precision Kits Range 0.314" up to 8.27"(8mm
More informationHIGH PRESSURE - hydraulic cylinders
SSU - hyraulic cyliners A, type aterial: rotective coating: eium: ax. piston spee : ax. working press.: Carb. steel an cast iron (hea) U,, O, T rimer (option), chromiumplate yraulic oil 0.5 m/s 200 From
More informationisosteelpress Business Partner USA: Biomass Systems Supply P.O. Box 1835 Chico, CA 95927, USA
H isosteelpress A www.isoplus.k Business Partner USA: Biomass Systems Supply P.O. Box 1835 Chico, CA 95927, USA Toll Free: 877-474-5521 Office: 530-893-2444 Fax: 530-893-2244 info@biomasssystemssupply.com
More informationForged Steel Valves. Gate / Globe / Check. DHV Industries, Inc. DHV Valve Company Inc.
3451 Pegasus Drive Bakersfiel, CA 93308 U.S.A. Call Toll Free: (877) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@hvinustries.com Website: www.hvinustries.com DHV Valve Company Inc.
More informationTension / Compression tap chucks for tapping cycles that are not synchronized
Tension / Compression tap chucks for tapping cycles that are not synchronize For tapping applications on CNC machines where the revolutions per minute an fee rate are not synchronize to the tap pitch,
More informationCATALOG 2016 SERIES 1
CTLOG 2016 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series
More informationHigh Pressure Valve Series for Hydrogen Stations
High Pressure Valve Series for Hyrogen Stations Ball Valves Manual Valve Automatic Valve Specifications of Ball Valves KITZ CESTEC -Series Maximum Allowable Pressure 103 MPa: 85 C
More informationFastener Drive & Screwdriving
www.irwin.com Fastener & Screwdriving tools Manufactured for Strength and value industry-specific Screwdriver Bits Fastener heads are often designed for the particular needs of specific applications and
More informationWire-thread inserts. Heavy-duty threads for series or repair
Wire-threa inserts Heavy-uty threas for series or repair The center of excellence for highperformance fastening technology KVT-Fastening is an expert for high-quality fastening applications an offers engineering
More informationAccessory pack includes: A. Auxiliary tool x1 B. Spindle bolt x1 C. Set screw x2 D. Seal washer x1 E. Tall cable guide x1 D. E.
CK-5000T Metropolis Patterson Transmission Crankset Installation Instructions Publishe July, 2011. ZSxxx.v0 Full Spee Ahea Installation Instructions Congratulations on your Full Spee Ahea prouct. Please
More informationElectrofusion Fittings & Specialist Tooling
Electrofusion Fittings & Specialist Tooling September 2016 (4.0mm pin) introuction Plasson Electrofusion Fittings Plasson fittings are specifically esigne for reliable, high performance pipe joining an
More information/00 RK 09/2017 EN RIVKLE. Blind rivet nuts and studs
9990000000 RK 09/20 N RIVK lin rivet nuts an stus RIVK 2 Page Principle an function 4 tanar RIVK blin rivet nuts 14 RIVK HRT - High Resistance Threa 36 HRT RIVK FC - For Fiber-reinforce polymer 38 FC RIVK
More informationHigh-Performance Servo-Worm Reducers Input and Output Couplings for Servo-Worm Reducers 18. Selection and Ratings for Servo-Worm Reducers 19 22
Table of Contents Page High-Performance Servo-Worm Reucers 7 17 Input an Output Couplings for Servo-Worm Reucers 18 Selection an Ratings for Servo-Worm Reucers 19 22 Mounting, Maintenance an Spare Parts
More informationISO 9001:2008 LOCKING ASSEMBLIES SHRINK DISCS KEYLESS RIGID COUPLINGS
OCKING ASSEMBIES SHRINK DISCS KEYESS RIGID COUPINGS Introuction ISO 9001:2008 CIMAX Metal Proucts Company & MAV S.p.A. A Unique Partnership In June 2011, CIMAX entere an exclusive agreement with MAV S.p.A.
More informationInformation. Plate Cylinder Type C(L)KU32. HIGH type. (Magnetic field resistant auto switch) New. New. New Newly added guide pins
Information Pin lamp yliners ompact yliner Type (L)G32 Magnetic fiel resistant auto switch mounting type LOW type (-X81) HIGH type (-X82) Plate yliner Type (L)U32 Magnetic fiel resistant auto switch mounting
More information*内輪/B126-B128/E_*内輪/B126-B128/E 11/05/25 10:07 ページ 127 Inner Rings
Inner Rings Inner Rings Inner Rings Inner Rings Many of the neele roller bearings use a shaft as the irect raceway surface without using inner ring. However, it is recommene to use any of the inner rings
More informationTapper Concrete Screw Anchor
Tapper PRODUCT INFORMATION Tapper Conrete Srew PRODUCT DESCRIPTION The Tapper fastening system is a omplete family of srew anhors for light to meium uty appliations in onrete, masonry blok an brik base
More informationSIT timing pulleys - TOP DRIVE HTD
IT timing pulleys - TOP DIV TD TOP DIV TD pulleys have a ifferent esign from the traitional toothe pulleys. The axial grooves are esigne to allow the belt teeth to catch the pulley teeth with negligible
More informationOn the market there are various types of V-belts, among which, the most 'widespread are: by SIT and shown in this catalogue are suitable to be used
V-Pulleys SIT V-Pulleys On the market there are various types of V-belts, among which, the most 'wiesprea are: narrow SP-SPA-SPB-SPC (ISO4184 - DIN 7753) classic -A-B-C (ISO 4184 - DIN 2215) American narrow
More informationShaft Diameter d 1 3 /16 01 B /4 01 B /16 01 B /2 01 B /16 01E B /4 01E B
Lubrication Fittings Lubrication points are tappe 1/4 NPT or 1/8 NPT epening on size an series, an fitte with nipples for grease lubrication as stanar. nipples may be remove an replace with other fittings
More informationP&N/SUTTON. A trusted name, serving Canadian industries since
/SUTTON A trusted name, serving Canadian industries since 1939 p&n/sutton Adjustable Button Dies 8 Button Die Holders 9 Centre s 2 Hand Taps (Chrome Steel) 4 Hand Taps (Ground Thread High Speed Steel)
More informationyour reliable partner EAS -Compact K.490.V16.EN
ES -Compact K.490.V16.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one of the most traitional an yet most innovative
More informationRatcheting Pullers Reversible Puller Combination Pullers Slide Hammer Pullers Heavy Duty C-Clamps...
C L A M P I N G & P U L L I N G Ratcheting Pullers... 1137 Reversible Puller... 1139 Combination Pullers... 1139 Slide Hammer Pullers... 1139 Heavy Duty C-Clamps... 1141 General Service C-Clamps... 1142
More informationANSI VALVE CATALOGUE
ANSI VAVE CATAOGUE GATE VAVES GOBE VAVES CHECK VAVES BA VAVES BUTTERFY VAVES SYSTEMS AND PRODUCTS FOR INDUSTRIA CARGO TRANSFER AND STORAGE ANSI VAVE CATAOGUE Introuction CTS has evelope itself into a reputable
More information0200/11.02 AMTEC. Precision thread inserts for plastic parts and equipment for installation
0200/11.02 AMTEC Precision threa inserts for plastic parts an equipment for installation AMTEC threa inserts Contents Page AMTEC highly wear-resistant threa inserts for plastic parts 3 The avantages an
More informationTapping attachments Tap chucks Cutting fluids
Tapping attachments Tap chucks Cutting fluis Quality, reliability an goo service are what TAPMATIC stans for Since its establishment in 1952, Tapmatic has manufacture tapping attachments of the highest
More informationTungsten Carbide Burrs
Tungsten Carbie Burrs Material Groups,, Types of Cut PFERD tungsten carbie burrs are esigne for machining materials of virtually any strength. Their superior performance reflects an optimum combination
More informationFULL COMPLEMENT NEEDLE BEARINGS
FULL OMPLEMENT NEELE EARINGS Technical features Full complement neele bearings These bearings are available with or without an inner ring from 12 bore size. Stanar complete bearings type NA have an inner
More informationHepcoMotion. Shaft precision steel and aluminium shaft
HepcoMotion Shaft precision steel an aluminium shaft Introucing the HepcoMotion Precision Shaft Correct Shaft selection is vital if maximum performance is to be achieve from your linear system. Hepco Precision
More informationØ range <500 mm. Ø range >500 mm. Operating conditions. Surface quality. Surface roughness R a R max
Hyraulics Ro Seals Merkel U-Ring T 20 Merkel U-Ring T 20 Merkel U-Ring T 20 PUR profile ring Material range
More informationVariable area flowmeter DFM 165 to 350
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D60 Vlotho Fon +9 (0) 57 33.7 990 Fax +9 (0) 57 33.7 99 00 www.asvstuebbe.e contact@asvstuebbe.e Variable area flowmeter DFM to 3 For all inustrial uses High
More informationPowerPoints & PowerPinners
PowerPoints & s Light Duty Portable Welded Insulation Fastening Solutions www.gripnail.com 800-474-7624 Heavy Duty Portable Fixed Head Gliding Head Local Gripnail Distributor Gripnail Corporation An Employee-Owned
More informationIncremental encoders Insulated through hollow shaft ø inch pulses per revolution programmable (interpolated system)
Features HS35P with insulate hollow shaft Robust inustrial encoer up to IP 67 protection Highly versatile fully programmable encoer Interchangeable bore size(s) using metal inserts Insulating sleeve to
More informationLinear Ball Bearings, Shafting & Supports Overview
Linear Ball Bearings, ing & Supports Overview Linear Ball Bearings, ing & Supports high performance linear ball bearings, shafting an shaft supports are now available from PTI. Available in Inch an Metric
More informationCable protection systems
Cable protection systems Poleon // Meleon // Meleon Pro Cable protection systems Reliable protection for cables In inustry, cables an wires are expose to exceptional loas. eat an col, tensile an compressive
More informationStretching Tools: ITH-Stretch-Method
Stretching Tools: ITH-Stretch-Metho The ITH-Stretch-Metho is capable of highly accurate, repeatable results to a tight tolerance of ±2.5%. These results are possible because the ITH-Stretch-Metho is free
More informationMeeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto
Specialty tools Meeting the needs of automotive customers and MRO organizations, no toolbox is complete without an assortment of specialty items. Blackhawk by Proto includes popular puller configurations,
More informationMarson Rivets, Rivet Nuts and Installation Tools
Marson Rivets, Rivet Nuts and Installation Tools Table of Contents Arconic Fastening Systems (AFS) offers the broadest line of blind fasteners in the industry. The breadth of the line is supported by the
More informationUsed for installation and dismantling designs such as pipes of almost any diameter. Handle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Used for installation and dismantling designs such as pipes of almost any diameter. Handle: 6" Chain: 18" (400mm) JTC-1149 20" CHAIN WRENCH Used for installation and dismantling
More informationTriple row axial angular contact ball bearings
Triple row angular contact ball bearings Series DKLF Heavy Series Features Bearings of series DKLF with a bore iameter of 30 mm an 40 mm are available in a Heavy series. This allows the user to achieve
More informationHandle: 20" Chain: 25"
Handle: 6" JTC-1147 6" CHAIN WRENCH Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT
More information5 Bearing Preload and Rigidity
Technology>Precision>Innovation outer ring. 2)The contact surface pressure on the raceway surface reaches 4200Mpa or 428kgf/mm2 in either the inner or outer ring raceway. The allowable axial loa for each
More informationISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
More informationNSK Ball Screws for Standard Stock
NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar stock series assures immeiate elivery. New! Patent Pening BSS Series next-generation
More informationASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar
Pressure Reucing Valve Type DMV Type DMV Print-No. / Design Size Max. Pressure Setting Range Pressure Setting Working Pressure Back lash Operating Security Maintenance Simple inline pipe connection ASV
More informationMicro-Grinder AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 250 WEST DUARTE ROAD, #E MONROVIA, CA USA
Micro-Griner Air Driven 0,000 min - (rpm) 0,000 min - (rpm) PRESTO 0,000 min - (rpm) MODULAR TYPE HIGH TORQUE AIR GRINDER High torque air motor assemble with special vane mechanism. Two types of air motors
More informationPVC AND CPVC PRESSURE PIPES ASTM D-1785 and F-441 Schedule 80
2 PVC AN CPVC PRESSURE PIPES ASTM -1785 an F-441 Scheule 80 PVC ASTM 1785 SCHEULE 80 NOMINAL OUTSIE IAMETER PVC SCHEULE 80 WALL THICKNESS WORKING PRESSURE WEIGHT IN IN MM IN MM PSI @73F LB/FT 10022 1/8
More informationSine encoders Insulated through hollow shaft ø inch sinewave cycles per turn
Features Rugge esign up to IP 67 protection Shock resistant up to 200 g s Insulating insert to prevent high shaft currents from amaging bearings Wie range voltage supply 4.75...30 VDC Precision 60 arc-secons
More informationBasin and Package Accessories TECHNICAL BROCHURE BCBASIN FEATURES
TECHNICAL BROCHURE BCBASIN FEATURES Fiberglass Basins - heavy duty construction, standard sizes to 72" ia. and 96" eep, custom basins to 20' deep available by quote request. Covers Pipe Grommets - Use
More informationPoly16 Plus Compression Fittings Technical information
1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut: polypropylene copolymer stabilize (PP-B) with Master Batches
More informationFeatures and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
More informationPersonal Care Commode
Parts Catalog Issued: Jun 2, 2009 Personal Care Commode Yes, you can. Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog contains service
More informationTechnical handbook Compression Fittings and Clamp Saddles
Technical hanbook 2009 Compression Fittings an Clamp Sales 1 Poly16 Plus Compression Fittings Technical information Materials Boy, Thrust ring: polypropylene copolymer stabilize (PP-B), UV stabilize Nut:
More informationMETAL DRILLING. Metal Drilling ENGINEERED FOR CONTROLLED PRECISION AND SPEED 118 SPLIT POINT 118 STANDARD POINT 135 SPLIT POINT TURBOMAX JET POINT
128 METAL DRILLING ENGINEERED FOR CONTROLLED PRECISION AND SPEED The IRWIN line of metal drill bits offers of a solution for every professional application. Each metal drill bit is made of high speed steel
More informationMetal Hoses and Expansion joints for Gas Applications
Metal Hoses an Expansion joints for Gas Applications 3356e/1/02/09/2,5 Witzenmann GmbH Östliche Karl-Frierich-Str. 134 75175 Pforzheim, Germany Phone +49 - (0)7231-581 - 0 Fax +49 - (0)7231-581 - 820 wi@witzenmann.com
More informationCOMPACT BEARING CR 2000
COMPACT BEARING CR 2000 Unreinforce elastomeric bearing loaable up to 20 N/mm² Bearing esign Contents Page Bearing esign formulae 2 Prouct escription 2 Shape factors 3 How to specify 3 Shear stiffness
More informationRUGBY HOIST CYLINDERS SERVICE BULLETIN
TRUCK BODIES & EQUIPMENT INTERNATIONAL, Inc. Website: www.rugbymfg.com E-mail: sales@rugbymfg.com Phone: (701) 776-5722 Toll Free: (800) 869-9162 RUGBY HOIST CYLINDERS SERVICE BULLETIN This bulletin applies
More informationNSK Ball Screws for Standard Stock
www.bergab.ru Берг АБ bergab@ya.ru Тел. (495)-228--21, факс (495) 223-371 NSK Ball s for Stanar Stock ompact Series Next-generation compact ball screws offer quiet, high spee operating performance. stanar
More informationPipe bracket spacing and support of pipelines
Pipe an support of pipelines General Pipe support for plastics pipes Plastic pipe systems shoul be installe using supports esigne for use with plastics an shoul then be installe taking care not to amage
More informationRINGFEDER Shrink Discs RfN 4091
RINGFEER Shrink iscs RfN 4091 split R1 ma Shrink isc RINGFEER RfN 4091 Location Shrink isc RINGFEER RfN 4091 HC imensions R1 ma Split Shrink iscs In the application shown above special screws accoring
More informationbearings for Escalator Step Guide Roller Yeonhap System Co., Ltd.
bearings for Forklift Truck Telescopic Crane Car Chain Conveyor Escalator Step Guie Roller Yeonhap System Co., Lt. Foune in 1970, YHS BEARING is a professional manufacturer of special bearings for heavy
More informationRIDGID Wrenches 1.1. Page. Wrench Type
RIDGID Wrenches Time-tested designs. Often imitated, never duplicated. Efficient designs to improve productivity. Innovative to provide new solutions to old problems. Wrench Type of Nom. s Size (in.) (in.)
More informationAngular contact ball bearings
Angular contact ball bearings 7200 BE CB Y HC5 Nomenclature 1 2 3 4 1. esign: 2. Clearance: 3. Cage esigns: B BE A E NR N2 2Z 2RS1 40 contact angle 40 contact angle, high capacity, all ISO corners Conra
More informationCoorinate Measuring Machine Applicable Probe Hea ZEISS HSS VAST ZEISS Probe Hea Specifications Probe Hea VAST-XT Stylus + extension maximum length () Stylus minimum tip iameter () Stylus + extension maximum
More informationDeep groove ball bearings
Deep groove ball bearings 6200-2 J/C3 HC5 GJN Nomenclature 1 2 3 4 5 1. Seals, shiels & snap rings: 2. Cage esigns: 4. Suffix: RSH RS2 RSL R 2RSH 2RS2 2RSL 2R 2 NR Contact seal of synthetic rubber (NBR)
More information35-kV Thru-Bushings F Series (bolt-in) for Air-Insulated to Air-Insulated Service 200 Amp, 600 Amp, 900 Amp and 1250 Amp
Page 1 2018 Equipment Connection Bus Bar, or Grounded Metal Equipment Plate F Series Mounting Holes ELRIM Cycloaliphatic Epoxy Provides: Nontracking, self-scouring, nonweathering performance Superior dielectric
More informationReliable Solutions for Continuous Casters
eliable Solutions for Continuous Casters For More Than A Century, Our Stanars Have Set The Stanar Aroun the worl, companies turn to Timken for innovation an reliability. With expertise in materials science
More informationPressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725
Pressure Relief Valve Overflow Valve Type DHV Type DHV Type DHV DIBt* approve DIBt* approve High repeating accuracy, with union sockets or spigot ens Print / The optimal monitoring valves Sizes up to Operating
More informationTABLE OF CONTENTS. 1. Preface P: 2 P: Vectors. 3. Summary Table P: 4-5
TABLE OF CONTENTS. Preface 2. Vectors 3. Summary Table 4. METAL a. HSS-G Drill Bits b. HSS-Co Drill Bits c. Bimetal Hole Saws d. TCT Hole Saws P: 2 P: 3 P: 4-5 P: 8 P: 9 P: 0- P: 2 5. CONCRETE a. Multi-Purpose
More informationPersonal Care Commode
Parts Catalog Issued: Jan 23, 2004 Personal Care Commode Yes, you can. PARTS CATALOG USAGE GUIDE The information contained in this document is subject to change without notice. This catalog contains service
More informationSection 3: Introduction. Dipped Radial Capacitors. Foreword SOLID TANTALUM RESIN DIPPED SERIES TAP/TEP
ection 3: Introuction Forewor AVX offers a broa line of soli Tantalum capacitors in a wie range of sizes, styles, an ratings to meet any esign nees. This catalog combines into one source AVX s leae tantalum
More informationPistol Grease Guns. AC475 comes complete with 4" steel extension and 4-jaw coupler with ball check AC476 comes complete with 18" flexible
Lubricating Mini Pistol Grease Guns Deluxe Single-hand-operated pistol grip Die cast grease gun head with dual discharge ports for use with steel extension as well as flexible hose Develops 3500 PSI Capacity:
More informationFP-4000 Series FLOAT LEVEL SWITCH OUTLINE MAIN APPLICATIONS STANDARD SPECIFICATION
FOR MULTIPOINT LEVEL ALARM ETECTION BY ONE UNIT FP- Series FLOAT LEVEL SWITC OUTLINE The FP- series is a float level switch, which is installe through the tank nozzle on tanks an/or pits. Level alarm etection
More informationProduct Range. Butterfly Valve Type
Prouct Range Butterfly Valve Type 567 ist of Abbreviations ANSI American National Stanar Institute ASTM American Society for Testing an Materials BS British Stanar IN eutsche Inustrie-Normen ISO International
More informationA global range. Extra hard for extra performance: the extra hard Bosch bits. Equipped for any application
Screwdriving 146 Screwdriving Overview Bosch Accessories 11/12 A global range Bosch shows how it s done. With a universal and comprehensive screwdriver bit range which has a bit to suit every application
More informationInstallation Instructions for John Deere cotton picker models: 9986 & 2-row and All-row systems included.
Ag Leader Technology Cotton Picker Installation Installation Instructions for John Deere cotton picker models: 9986 & 9996 2-row and All-row systems included. IMPORTANT: Ensure the model numbers shown
More information