Arbours for PSC Polygon Shank Tooling
|
|
- Lucy Sutton
- 5 years ago
- Views:
Transcription
1
2 Arbours for Polygon Tooling CAT V-FLANGE to Taper CV 40 Designation L L1 kg SPECIAL CV40ADB CV40ADB AD Taper to Designation L L1 kg SPECIAL A A CV50ADB CV 50 CV50ADB CV50ADB MAS403 BT Taper to Taper BT Designation L L1 kg SPECIAL BT 40 MAS403-BT BT 50 MAS403-BT AD+B Taper to Taper Designation L L1 kg SPECIAL AB AB AB AB AB MAS403 BT-AD+B to Taper BT BT 40 BT 50 Designation L L1 kg SPECIAL MAS403-ADBT MAS403-ADBT MAS403-ADBT MAS403-ADBT MAS403-ADBT HSK-A Arbours to HSK-A63 HSK-A100 Designation L L1 kg SPECIAL HSK-A HSK-A HSK-A HSK-A HSK-A HSK-A125 HSK-A D Andrea (Polygon) Tooling is manufactured to ISO and is completely interchangeable with the Sandvik CAPTO* tooling system. Using these holders then permits you to use the complete D Andrea Modular MHD boring system in your machine tools. The shank crossovers are as listed: CAPTO D Andrea C4 C5 50 C6 63 C8 80 C * Sandvik & CAPTO are registered trademarks of Sandvik Intellectual Property AB 2
3 Polygon Extensions, Reducers & Blanks to Extensions Designation L kg SPECIAL PR PR PR PR PR PR PR PR PR PR Polygon Blanks HRc 28 Designation d¹ L1 kg HRc SPECIAL NS RC HRC NS RC NS RC NS RC NS RC NS RC NS RC NS RC NS RC NS RC NS RC to Reducers Designation d1 d2 L L1 kg SPECIAL RD-/ RD-50/ RD-50/ RD-50/ RD-63/ RD-63/ RD-63/ RD-63/ RD-80/ RD-80/ RD-80/ RD-80/ RD-80/ RD-100/ Polygon Blanks HRc 42 Designation d¹ L1 kg HRc SPECIAL NS RC NS RC NS RC NS RC NS RC NS RC NS RC NS RC NS RC NS RC NS RC For Precision Boring Heads, including Digital, please refer to Page 4 3
4 Polygon Precision Boring Heads TR-E Digital Precision Boring Heads Digital read-out / Inch or Metric Range from.10" to 7.87" (2.5 to 200 mm) High precision through direct measurement of Slide movement Zero Backlash Compensation Single button operation for "On", "Reset" and to change from Inch to Metric Display resolution " (.002 mm) Coolant through to IP67 Standard Available with MHD or Coupling TR-E D Andrea Precision Boring Heads for Fine Finishing (Cartridges / Slides / Bars sold separately) Designation TR-E50/50 Designation TR-E63/63 TR-E80/80 Size 50 Size Range L L1 C SPECIAL Accessories TBD B1 / B3 / B5 / B P SF..25 / SF , BM PS PS / Range L L1 c SPECIAL Accessories TBD PS B3 / B5 / B PS / P SF..25 / SF P SF , P PS / TBD PS B3 / B5 / B PS / P SF..25 / SF P SF , P PS / PS / Note! Accessories listed above are not included with head and must be ordered separately TRM Non-Digital Precision Boring Heads TRM-50/ Head Range.10" to 4.25" Designation Size Ø L L1 C Accessories* D08-16 B P25.63 SF..25 / SF BM PS TRM-50/ PS / TRM-50/50 Head Range.10" to 4.25" Designation Size Ø L L1 C Accessories* D08-16 B P25.63 SF..25 / SF BM PS TRM-50/ PS / TRM-50/63 Head Range.10" to 4.25" Designation Size Ø L L1 C Accessories* D08-16 B P25.63 SF..25 / SF BM PS TRM-50/ PS / TRM-63/63 Head Range.10" to 4.92" Designation Size Ø L L1 C Accessories* P / D08.16 B P SF..25 / SF P SF..25 / SF32 TRM-63/ PS TRM-80/80 Head Range.10" to 8.66" Designation Size Ø L C Accessories* P / D08.16 B TBD PS B3 / B5 / B P SF..25 / SF32 TRM-80/80 1, P SF..25 / SF P SF..25 / SF PS PS Note! Accessories listed above are not included with head and must be ordered separately 4
5 Polygon Turning Tool Holders HP* -MCD Holders PCLNR/L PDJNR/L SVHBR/L PSKNR/L PSRNR/L HP* High Pressure capable tooling available on request Designation A A1 F L L1 Kr kg SPECIAL Insert MCD--PCLNR/L CNM_-43_ MCD--PDJNR/L DNM_-44_ MCD--PSKNR/L SNM_-43_ MCD--PSRNR/L MCD-50-PCLNR/L CNM_-43_ MCD-50-PDJNR/L DNM_-44_ MCD-50-PSKNR/L SNM_-43_ MCD-50-PSRNR/L MCD-63-PCLNR/L CNM_-64_ MCD-63-PDJNR/L DNM_-44_ MCD-63-SVHBR/L VBM_-33_ MCD-63-PSKNR/L SNM_-64_ MCD-63-PSRNR/L MCD-80-PCLNR/L CNM_-64_ MCD-80-PDJNR/L DNM_-44_ MCD-80-SVHBR/L VBM_-33_ MCD-80-PSKNR/L SNM_-64_ MCD-80-PSRNR/L HP* PCMNN PDNNN SVVBN SRDCN -MCD Holders HP* High Pressure capable tooling available on request Designation MHD d1 A L L1 Kr kg SPECIAL Insert MCD--PCMNN CNM_-43_ MCD--PDNNN DNM_-44_ 40 M MCD--SVVBN VBM_-33_ 1.97 MCD--SRDCN RCM_-10T3_ MCD-50-PCMNN CNM_-43_ 50 MCD-50-PDNNN DNM_-44_ MCD-50-SVVBN VBM_-33_ MCD-50-SRDCN RCM_-1204_ M MCD-63-PCMNN CNM_-43_ MCD-63-PDNNN DNM_-44_ MCD-63-SVVBN VBM_-33_ 1.97 MCD-63-SRDCN RCM_-1204_ MCD-80-PCMNN CNM_-43_ 80 MCD-80-PDNNN DNM_-44_ M MCD-80-SVVBN VBM_-33_ MCD-80-SRDCN RCM_
6 Polygon Turning Tools TyCarb Tools also available on request Designation L L1 d1 d2 a B x H kg SPECIAL 50 MCD-50-TU20.45R/L x MCD-63-TU25.45R/L x MCD-80-TU32.45R/L x Bilz Style Tapping Chucks Designation L L1 L2 d1 d2 B x H kg SPECIAL 50 MCD-50-TU x MCD-63-TU x MCD-80-TU x ER Collet Chucks Extended ER Collet Chucks Designation L L1 L2 d1 d2 B x H kg SPECIAL MCD-63-TU25.03R x MCD-63-TU25.03L Shell Arbours d1 H7 Designation mm inch d2 L L1 L2 kg SPECIAL MCD-50-D.25X MCD-63-D.25X MCD-63-D.40X MCD-80-D.25X MCD-80-D.40X Turning & Boring tools Available From: 6 Specifications are subject to change without notice. No responsibility for errors and/or printing errors will be accepted.
FOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
More informationCAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
More informationFMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationPENCIL DESIGN. Hydraulic high precision toolholder Pencil version. Benefits and features
PENCIL DESIGN Benefits and features For drilling to finishing Pencil design enabling machining in deep cavities and complex components Special designs possibility High clamping force 6 Nm is with its extreme
More informationBORING SYSTEMS INFO. 3 nd edition
BORING SYSTEMS INFO 3 nd edition April 25 TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY FOR HIGH PRECISION TECHNOOGY TECHNOOGY FOR HIGH PRECISION Ingersoll
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationSHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationShrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
More informationCAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG
powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationAlberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30
350 5 TURBODRILL/TURBOFLEX 139 79 53 11 184 0 10 Ø25 Ø80 86 ER40 3/30 131 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com TURBODRILL &
More informationType2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
More informationER40 Collet Sets and Collets. TG100 Collets. TG150 Collets. Retention Knobs for Standard and Coolant Thru. Vertical/Horizontal Setup Holding Fixture
Table of Contents Toolholders Toolholders 422 438 CAT50 Rigid Tap Holders and Parts ER40 Collet Sets and Collets Key s 423 441 451 CAT50 Tension & Compression Tap Holders and Parts TG100 Collets Solid
More informationHeimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12
1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
Alberti LIVE TOOLS 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Alberti
More informationGUHROSync Synchro tapping chucks. the Best of. Guhring - your world-wide partner
the Best of BOTH SYSTEMS The advantages of Hydraulic chucks & in one tool holder Now also available with ISO taper, MAS/BT and straight shank GUHROSync Guhring - your world-wide partner GUHROSync THE EASY
More informationDIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...
IN 69871 SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER........ 47 SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50
More informationTradition in Perfection.
Angular Heads Tradition in Perfection. For more than 50 years the name ROMAI has stood for the highest precision and process reliability in machining. The next generation begins today. We have succeeded
More informationGood reasons to use Albrecht drill chucks
3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened
More informationCOMPANY INTRODUCTION
COMPANY INTRODUCTION Uncompromising Quality Utilizing State-of-the-Art Facilities and Equipment DMG-MORI Multitasking CNC Machines The work piece is completed in a single set-up. Assures the best qualities
More informationMULTI-TASK MACHINING. Tooling possibilities Products
Content Tooling possibilities Products Toolholder overview Coromant Capto multi-functional tools CoroPlex MT - milling and turning tool CoroPlex TT - turning tool CoroPlex SL mini-turret CoroTurn P - Coromant
More informationMULTI-TASK MACHINING. Tooling possibilities Products
Content MULT-TASK MACNNG MULT-TASK MACNNG Tooling possibilities Products Tool holder overview Coromant Capto multifunctional tools CoroPlex MT - milling and turning tool CoroPlex TT - turning tool CoroPlex
More informationHIGH PRECISION HIGH PERFORMANCE
Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationBT Shank Tools BT30...E2 E18 BT40...E20 E60 BT50...E62 E95.
BT Shank Tools BT30.................................................................................E2 E18 BT40................................................................................E20 E60 BT50................................................................................E62
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationAccessories. Other Accessories
.01 Wrenches.03 Wrench Heads.04 Torque Wrenches.05 Features and Benefits of Counter Nut.05 CM/ER Counter Nut.06 Trays for Collet Sets.06 Trays for Sealing Disk Sets.07 Clamping Units PGU/PGC Other.09 WMB
More informationHPI - PIONEER Premium Tool Holding & Work Holding SG - Second Generation Tool Holding System
HPI - PIONEER Premium Holding & Work Holding SG - Second Generation Holding System The Pioneer Group We have been in the metal cutting industry for over three decades and contributed to the progress of
More informationCALL US WITH YOUR MACHINE MAKE & MODEL. WHETHER YOU NEED COOLANT THRU OR SOLID, WE WILL FIND THE RETENTION KNOB FOR YOU!
RETENTION KNOBS For CAT40, CAT50, BT0, BT40 & BT50 CAT40 Retention Knobs 5/8 Description DWG. T A L HOLE? Socket X70A 40EA / A45.440(C.8) A A.65 45.5 Y RKW40 X70A 40EA / A45.440 A A.65 45.5 N RKW40 X704A
More informationANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationVýhradní zastoupení v České republice: PM-TECH s.r.o Tel: (00420)
HSK DIN 69893 / ISO12164.1 Forms Characteristics.3 Features Benefits.4 Information.6 HSK-A ER.10 HSK-C ER.12 HSK-E HSK-F ER.13 Toolholder for Micromachining.14 HSK-E ER MS.14 Softsynchro Tapping Holders.16
More informationSENSITIV T-TA. Boring and facing heads with manual and automatic feed
SENSITIV T-T Boring and facing heads with manual and automatic feed 8 SENSITIV T-T General features The line of T-T boring and facing heads is provided with radial feed movement of the radial slide while
More informationStub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
More informationHSK (DIN 69893) A50 A63 A100. COLLET CHUCK HOLDER Standard Length...6 Extended Length...7 Mini Nuts...8 TAPPING COLLET CHUCK HOLDER...
(IN 69893) A50 A63 A100 COET CHUCK HOER Standard ength...6 Extended ength...7 Mini Nuts...8 TAPPING COET CHUCK HOER......... 9 SHRINK FIT HOERS...10 SIE OCK HOER Standard ength...12 Extra ong...13 FACE
More informationTaper shank arbors for drill chucks
KD Taper shank arbors for drill chucks Taper shank arbors KD Tool group A04 Type 236 Taper shank arbors with drill chuck taper DIN 238 completely hardened and ground Item no. Morse taper DIN 228 B Hole
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationCMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
More informationIndex SENSITIV T-TA SENSITIV T-TA. GENERAL FEATURES p COMPONENTS AND ASSEMBLY p SUPPLY p ARBORS p ACCESSORIES p.
Index SENSITIV T-T Boring and facing heads with manual and automatic feed SENSITIV T-T Boring and facing heads with manual and automatic feed GENERL ETURES p. 120 COMPONENTS N SSEMBLY p. 121 SUPPLY p.
More informationDV Shank Tools DV40...F2 F37 DV50...F38 F71
DV Shank Tools DV40..................................................................................F2 F37 DV50.................................................................................F38 F71
More informationSpindle & Taper Care Products
Spindle & Taper Care Products Swiss Precision Tools UltraSonic Cleaner Ultrasonic Cleaner Ultrasonic Cleaning Solution US-40SE US-815CLEAN Heavy duty stainless steel double-wall design provides highly
More informationSTANDARD PROGRAMME Shrink Chucks
116 STANDARD PRORAMME Shrink Chucks 122 STANDARD PRORAMME Shrink Chucks Shrink Chuck ISO 7388-1, Form AD/AF (prev. DIN 69871-AD/B), narrow design, ISO 7388-1 Form AD/AF 2.5 SK/ISO Dimensions sw Weight
More informationModules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
More informationenduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
More informationDriven Toolholders for HAAS Machines
riven Toolholders for HAAS Machines Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INIVIUALITY QUALITY SERVICE Tale of Contents Type Page riven Toolholders SL 20 / SL 30 8-11 Modular Tool
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationHSK F80 MAKINO S HRINK FIT C H UCK S
Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4
More informationWINNER! ALBRECHT. Precision Chucks
WINNER! ALBRECHT Precision Chucks At present, the Albrecht APC is the best performing chuck world wide. In the area of speed, tool life and safety. 3 4 You can expect: A clearly higher chip removal rate
More informationER Collet Chucks TOOLHOLDING
ER Collet Chucks All ER collet chuck tapers meet or exceed approprate standards. See Techncal Secton n front of catalog for specfcatons. BALANCEABLE AVAILABLE Constructed of alloy steel for long, durable
More informationWe do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»
» Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting
More informationKTA SPINDLE TOOLINGS
Price INR R 2013 KTA SPINDLE TOOLINGS SILVER SERIES PRECISION TOOL HOLDERS FOR CNC MACHINES HSK DIN 69893-1 FORM A Features : Special Material with Tensile NEW 2 strength inthe Core Min 950 N/mm. Case
More informationSTANDARD PROGRAMME Hydraulic Chucks
20 STANDARD PRORAMME STANDARD PRORAMME 23 Hydraulic Chuck ISO 7388-1, Form AD (prev. DIN 69871-AD), extra short design d 1 d 2 d 3 l3 ISO 7388-1 Form AD 3 µm h6 2.5 25000 min Nominal size SK/ISO Dimensions
More information31 avenue des lacs SCIONZIER Tel : Fax :
84 STANDARD PRORAMME High Performance Holder 31 avenue des lacs 74950 SCIONZIER Tel : 04 50 18 030 27 Fax : 04 50 18 30 28 md@mecadiffusion.net www.mecadiffusion.com STANDARD PRORAMME High Performance
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationModular Spindle Technology. Productivity Solutions.
Modular Spindle Technology Productivity Solutions Kuvam s Phylosophy: We at Kuvam Technologies believe in win~win~win relationship i.e. Win for the customer, Win for the team and Win for the company. WIN
More informationER System The pioneering toolholding system. Product catalog
ER System The pioneering toolholding system Product catalog Company profile Providing solutions for cutting-edge toolholding Three systems one brand 4 Wet and dry machining 6 Special solutions: recool
More informationANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationIT.TE.DI. Milling. TEDI MILL The Perfect Answer. TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters
IT.TE.DI. Milling 03 TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters TEDI MILL Cartridges 04 08 14 20 TEDI MILL The Perfect Answer TEDI MILL CBN Shell Type Face Mill Cutters Integral
More informationClamping technology. MAPAL Floating holder. for multi-bladed high performance reamers NEW
Clamping technology MAPAL Floating holder for multi-bladed high performance reamers NEW 2 Floating holder for MAPAL multi-cutting reamers When using reamers on lathes it is often necessary to compensate
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationBMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
More informationBENZ Shaped Profile Tooling on a Haas DS30 SSY Turret.
BENZ Shaped Profile Tooling on a Haas DS30 SSY Turret www.benztooling.com March 2015 Table of Contents Live Tools ST 10 (Y) ST 20 (Y) ST25 (Y) ST 30 (Y) ST 35 (Y) DS 30 (Y) ST 20 SS (Y) ST 30 SS (Y) DS
More informationIT.TE.DI. Milling. TEDI MILL The Perfect Answer. TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters
IT.TE.DI. Milling 03 TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters TEDI MILL Cartridges 04 08 14 20 TEDI MILL The Perfect Answer TEDI MILL CBN Shell Type Face Mill Cutters Integral
More informationpowrgrip System The ambitious toolholding system Product catalog
powrgrip System The ambitious toolholding system Product catalog Company profile Providing solutions for cutting-edge toolholding Product offering 04 Discover powrgrip 06 Automatic clamping unit PGU 07
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationGMS SERIES Tool Spindle Type 5-axis Turning Centers
GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide
More informationWe set the standard for the highest precision and most advanced technology in the machine tool accessory market
ANGLE HEADS heimatec GmbH-Renchen, Germany Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility, on 7.5 acres, is home to over 100
More informationCNC Double Column Machining Center. SDV-H Series SDV Series.
CNC Double Column Machining Center www.sigmacnc.com.tw Special Patent Design Construction Features The Motion of Z-axis is Supported by 2 Linear Guideways The Motion of Z-axis is Supported by 4 Linear
More informationTaladro automático por coordenadas Automatic coordinate drilling machine TECHNICAL CHARACTERISTICS
RAPID DRILL TRD SERIES FIXED BED-TYPE Equipment: automatic X- Y and Z -axis, driven by servo-motors (programmable) Spindle turning driven also by asynchrony motor of 8,9 kw or servomotor 4,4 kw. Column
More informationThat s E[M]CONOMY: NEW. Not just training: Real action! CONCEPT TURN 260. CNC training with industrial performance
[ That s ] E[M]CONOMY: NEW Not just training: Real action! CONCEPT TURN 260 CNC training with industrial performance Concept TURN 260 As a systematic advancement of the CT250, the CT260 convinces by its
More informationHES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE
ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output
More informationPCD & CBN TANGENTIAL MILLING
& TANGENTIAL MILLING CONTENTS Highlights 4 Codifiy 6 Shell Type 7 Cylindrical Type 8 Monoblock Type 9 Inserts 12 Adaptors 18 Setting Procedures 24 Spare Parts 26 Cutting Parameters 31 HIGHLIGHTS HIGHLIGHTS
More informationStandard Programme Clamping Technology. The tool specialists for the trade.
Standard Programme Clamping Technology The tool specialists for the trade. Direction Leipzig 4 Direction Dresden Direction Erfurt Chemnitz 72 95 The tool specialists for the trade. WTE Präzisionstechnik
More informationOMG NorthAmerica. The synthesis...
Series VH Series MO Series BAH Series TA OMG NorthAmerica The synthesis... SERIES BAH Extensions and Angle Heads SERIES HT Revolving heads SERIES TA-TAV-TAF-TAO Angle heads SERIES MO High precision spindle
More informationBMT 65 TOOLING BENZTOOLING.COM
BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s
More informationBalanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
More informationpowrgrip for mold & die Trustworthy toolholding solutions
powrgrip for mold & die Trustworthy toolholding solutions REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Medical/Dental Introduction 01 Features and
More informationPOWER CLAMP SHRINK FIT TECHNOLOGY.
POWER CLAMP SHRINK FIT TECHNOLOGY www.haimer-usa.com CONTENTS Power Clamp Page Power Clamp Advantages 3 Coil Technology 4 Contact Cooling 5 Power Clamp System: Basic Line/Profi Line/Premium Line 6 Amortization
More informationSK COLLET CHUCKS. SK Collet Chuck Features. Titanium Nitrided Bearing Nut (HV2,200) (US Patent )
SK COLLET CHUCKS www.lyndexnikken.com 847.367.4800 SK Chuck Features Increased Gripping Power The smaller the taper angle is, the better concentricity is obtained. Our steep 8 collet seats deeper in the
More informationWeb :
02701133 9011001595 Email: info@manartools.com manartools@gmail.com Web : www.manartools.in, www.manartools.com, http://www.indiamart.com/manartools/ Introduction Our Products We are specialize in manufacturing
More informationStatic & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form
More informationDOOSAN LIVE & STATIC TOOLING
DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800
More informationQuick-change adapters, positive drive inch sizes
P Quick-change aapters, positive rive inch sizes For quick change tap chucks TA, T, NC an SP QC, with or without internal coolant system. Features an Avantages n no pre-selective torque rive n suitable
More informationTurning tools GENERAL TURNING PARTING AND GROOVING THREAD TURNING MULTIFUNCTIONAL TOOLS TOOL HOLDING TURNING TOOL ADAPTORS
UTTN TOOLS ROM SANVK OROMANT Turning tools NRAL TURNN PARTN AN ROOVN TRA TURNN MULTUNTONAL TOOLS TOOL OLN TURNN TOOL AAPTORS 2015 ylindrical sleeve with asy-ix positioning SO 9766 Metallic sealed for high
More informationDETa-1 Collet Holder DTA. DTE Fully applicable. DTB For high-speed cutting, High cost performance. 2mm collapsibility with just one collet!!
HSK-T ing Systems or Turning Mill M/ ETa-1 OET HOER AGE HEA General Purpose ETa-1 ollet Holder Pull collet type OET HOER 2mm collapsibility with just one collet!! Just 6 collets is all it takes to chuck
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationINDUSTRIAL DISTRIBUTOR CATALOG
INDUSTRIAL DISTRIBUTOR CATALOG 20 Thompson Road, East Windsor, CT 06088 1-800-249-5662 860-623-4132 Fax www.komaprecision.com info@komaprecision.com 1 2 TABLE OF CONTENTS KOMA Corporate Information...
More informationCompatibility overview of accessories for drilling machines
Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608
More informationMulti-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationTechleader Clearance Items Qty. Order No. Description Price
Techleader Clearance Items Qty. Order No. Description Price Collets 16C 4 160-056-SE 16C 7/8" Round Serrated Collet $40.95ea 2 160-004 16C 1/16" Round Smooth Collet $34.50ea KATO TC TAP COLLETS 1 810-101
More informationApril 2017 TOOLING FOR MULTUS U3000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 MULTUS U3000/U4000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
More information