31 avenue des lacs SCIONZIER Tel : Fax :
|
|
- Leon Sanders
- 5 years ago
- Views:
Transcription
1 84 STANDARD PRORAMME High Performance Holder 31 avenue des lacs SCIONZIER Tel : Fax : md@mecadiffusion.net
2 STANDARD PRORAMME High Performance Holder 87 HPH - High Performance Holder ISO , Form AD/AF (prev. DIN AD/B), short narrow design l4 d 3 HPH - High Performance Holder ISO Form AD/AF min Nominal size SK/ISO Dimensions sw Weight d 3 l 1 l 2 l 3 l M5x Z M6x Z M8x1x Z M10x1x Z M10x1x Z M12x1x Z M12x1x Z M16x1x Z M16x1x Z M16x1x Z Basic form AD. Please indicate form AF (prev. B) in your order. Spare parts and accessories at the end of this chapter. Custom designs available on request.
3 88 STANDARD PRORAMME High Performance Holder HPH - High Performance Holder ISO , Form AD/AF (prev. DIN AD/B), short heavy duty design ISO Form AD/AF min Nominal size SK/ISO Dimensions sw Weight l 1 l 2 l M8x1x Z M16x1x Z Basic form AD. Please indicate form AF (prev. B) in your order. Spare parts and accessories at the end of this chapter. Custom designs available on request.
4 90 STANDARD PRORAMME High Performance Holder HPH - High Performance Holder ISO , Form AD/AF (prev. DIN AD/B), short heavy duty design ISO Form AD/AF min Nominal size SK/ISO Dimensions sw Weight l 1 l 2 l M8x1x Z M16x1x Z M16x1x Z Basic form AD. Please indicate form AF (prev. B) in your order. Spare parts and accessories at the end of this chapter. Custom designs available on request.
5 92 STANDARD PRORAMME High Performance Holder HPH - High Performance Holder DIN A Short narrow design l4 d 3 DIN Form A min Nominal size HSK-A Dimensions sw Weight d 3 l 1 l 2 l 3 l M5x Z M6x Z M8x1x Z M10x1x Z M10x1x Z M12x1x Z M12x1x Z M16x1x Z M16x1x Z M16x1x Z Spare parts and accessories at the end of this chapter. MQL-capable design possible on request. Custom designs available on request.
6 STANDARD PRORAMME High Performance Holder 93 HPH - High Performance Holder DIN A Short heavy duty design l4 d 3 HPH - High Performance Holder DIN Form A min Nominal size HSK-A Dimensions sw Weight d 3 l 1 l 2 l 3 l M8x Z M8x Z Spare parts and accessories at the end of this chapter. MQL-capable design possible on request. Custom designs available on request.
7 STANDARD PRORAMME High Performance Holder 95 HPH - High Performance Holder DIN A Short narrow design l4 d 3 HPH - High Performance Holder DIN Form A min Nominal size HSK-A Dimensions sw Weight d 3 l 1 l 2 l 3 l M5x Z M6x Z M8x1x Z M10x1x Z M10x1x Z M12x1x Z M12x1x Z M16x1x Z M16x1x Z M16x1x Z Spare parts and accessories at the end of this chapter. MQL-capable design possible on request. Custom designs available on request.
8 96 STANDARD PRORAMME High Performance Holder HPH - High Performance Holder DIN A Short heavy duty design l4 d 3 DIN Form A min Nominal size HSK-A Dimensions sw Weight d 3 l 1 l 2 l 3 l M8x Z M8x Z M8x Z Spare parts and accessories at the end of this chapter. MQL-capable design possible on request. Custom designs available on request.
9 98 STANDARD PRORAMME High Performance Holder HPH - High Performance Holder ISO (JIS B6339) Short narrow design, coolant supply as per ISO , Form JD/JF l4 d 3 ISO Form JD/JF min Nominal size BT Dimensions sw Weight d 3 l 1 l 2 l 3 l M5x Z M6x Z M8x1x Z M10x1x Z M10x1x Z M12x1x Z M12x1x Z M16x1x Z M16x1x Z M16x1x Z Basic form JD. Please indicate form JF (prev. B) in your order. Spare parts and accessories at the end of this chapter. Version with face connection on request. Custom designs available on request.
10 STANDARD PRORAMME High Performance Holder 99 HPH - High Performance Holder ISO (JIS B6339) Short heavy duty design, coolant supply as per ISO , Form JD/JF HPH - High Performance Holder ISO Form JD/JF min Nominal size BT Dimensions sw Weight l 1 l 2 l M8x1x Z M16x1x Z Basic form JD. Please indicate form JF (prev. B) in your order. Spare parts and accessories at the end of this chapter. Version with face connection on request. Custom designs available on request.
11 STANDARD PRORAMME High Performance Holder 101 HPH - High Performance Holder ISO (JIS B6339) Short heavy duty design, coolant supply as per ISO , Form JD/JF HPH - High Performance Holder ISO Form JD/JF min Nominal size BT Dimensions sw Weight l 1 l 2 l M8x1x Z M16x1x Z M16x1x Z Basic form JD. Please indicate form JF (prev. B) in your order. Spare parts and accessories at the end of this chapter. Version with face connection on request. Custom designs available on request.
12 104 STANDARD PRORAMME High Performance Holder Pressure Screw HPH For pressure input. High-strength pressure screws - for safe acceptance of high clamping forces Coated pressure screws DLC - for optimum wear protection and long service life sw l sw l Weight M M Allocation of Pressure Screw HPH sw l For High Performance Holder M Z; Z; Z; Z M Others
13 STANDARD PRORAMME High Performance Holder 105 Stop Screw HPH For length adjustment sw l sw d Stop Screw HPH for HSK-A63; HSK-A100; SK40 HPH - High Performance Holder sw For clamping diameter d l Weight M M M8x M10x M10x M12x M12x M16x M16x M16x Stop Screw HPH for BT40 Only wet design - thus short cantilever length sw For clamping diameter d l Weight M M M8x M10x M10x M12x M12x M16x M16x M16x Stop Screw HPH for short heavy duty design Only wet design - thus short cantilever length sw For clamping diameter M8x (HSK) M16x (ISO/BT) Custom designs available on request.
14 106 STANDARD PRORAMME High Performance Holder Reducing Sleeve, coolant sealed With slits, for fl exible diameter application l d d1 d2 Dimensions d l l 1 l 2 Weight Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Caution: Never clamp without tool - the reducing sleeve will be damaged!
15 STANDARD PRORAMME High Performance Holder 107 Reducing Sleeve, coolant sealed With slits, for fl exible diameter application l HPH - High Performance Holder d d1 d2 Dimensions d l l 1 l 2 Weight Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Caution: Never clamp without tool - the reducing sleeve will be damaged!
16 108 STANDARD PRORAMME High Performance Holder Reducing Sleeve, KKB With coolant bores, for fl exible diameter application l d d1 d2 Dimensions d l l 1 l 2 Weight KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB KKB Caution: Never clamp without tool - the reducing sleeve will be damaged!
17 STANDARD PRORAMME High Performance Holder 109 Shrink Extension As flexible adaptation, length adjustment screw (from ø 6mm) Tool length as per customer request possible 4.5 d 3 HPH - High Performance Holder l4 Dimensions sw Weight d 3 l 1 l 2 l 3 l Z Z Z M Z Z Z Z M Z M Z Z Z Z M Z M Z M8x Z M10x Z
18 110 STANDARD PRORAMME High Performance Holder Shrink Extension As flexible adaptation, length adjustment screw (from ø 6mm) Tool length as per customer request possible 4.5 d 3 l4 Dimensions sw Weight d 3 l 1 l 2 l 3 l Z Z Z M Z M Z M8x Z M10x Z M10x Z M10x Z M Z M Z M8x Z M10x Z M10x Z M10x Z M10x Z M10x Z
19 STANDARD PRORAMME High Performance Holder 111 AAS Stop Screw With the use of WTE Reducing Sleeves for axial length adjustment sw l HPH - High Performance Holder Stop Screw AAS 12 for order designation xx Dimensions sw l Weight M10x M4x Stop Screw AAS 20 for order designation xx Dimensions sw l Weight M16x M8x M4x Stop Screw AAS 25 for order designation xx Dimensions sw l Weight M16x M8x M4x Stop Screw AAS 32 for order designation xx Dimensions sw l Weight M16x M8x
20 112 STANDARD PRORAMME High Performance Holder Hydraulic Expansion Extension As fl exible adaptation l4 d min Dimensions sw Weight d 3 l 1 l 2 l 3 l M10x Z M16x Z M16x Z M16x Z/ Coolant Transfer Pipe For DIN A/E HSK Weight
21 STANDARD PRORAMME High Performance Holder 113 Extraction Key For easy extraction of the Reducing Sleeves from the WTE Hydraulic Chuck HPH - High Performance Holder For A B HS HS HS HS Hexagonal T-key For axial length adjustment sw l Weight
22 114 STANDARD PRORAMME High Performance Holder Assembly Key For Coolant Transfer Pipe sw Weight Hexagonal T-key For pressure input sw l Weight
STANDARD PROGRAMME Hydraulic Chucks
20 STANDARD PRORAMME STANDARD PRORAMME 23 Hydraulic Chuck ISO 7388-1, Form AD (prev. DIN 69871-AD), extra short design d 1 d 2 d 3 l3 ISO 7388-1 Form AD 3 µm h6 2.5 25000 min Nominal size SK/ISO Dimensions
More informationSTANDARD PROGRAMME Shrink Chucks
116 STANDARD PRORAMME Shrink Chucks 122 STANDARD PRORAMME Shrink Chucks Shrink Chuck ISO 7388-1, Form AD/AF (prev. DIN 69871-AD/B), narrow design, ISO 7388-1 Form AD/AF 2.5 SK/ISO Dimensions sw Weight
More informationStandard Programme Clamping Technology. The tool specialists for the trade.
Standard Programme Clamping Technology The tool specialists for the trade. Direction Leipzig 4 Direction Dresden Direction Erfurt Chemnitz 72 95 The tool specialists for the trade. WTE Präzisionstechnik
More informationStandard Programme Common Price List 2016 CLAMPING TECHNOLOGY. The tool specialists for the trade.
Standard Programme Common Price List 2016 CLAMPING TECHNOLOGY The tool specialists for the trade. 2 STANDARD PROGRAMME Introduction HIGH PRECISION MADE IN GERMANY WITH COURAGE TO INNOVATE! WTE Präzisionstechnik
More informationGUHROSync Synchro tapping chucks. the Best of. Guhring - your world-wide partner
the Best of BOTH SYSTEMS The advantages of Hydraulic chucks & in one tool holder Now also available with ISO taper, MAS/BT and straight shank GUHROSync Guhring - your world-wide partner GUHROSync THE EASY
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationModules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationGood reasons to use Albrecht drill chucks
3 * Good reasons to use Albrecht drill chucks Quality 2-phase quality control e.g. 100% run-out accuracy test (similar to DIN 10888) parts made to fit each other exactly working parts are case-hardened
More informationSHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
More informationQuick-change adapters, positive drive inch sizes
P Quick-change adapters, positive drive inch sizes For quick change tap chucks T, TIC, NC and SPD QC, with or without internal coolant system. Features and dvantages n equally appropriate for taps with
More informationFMH. Metric Sizes. Face Mill Arbor (For Cutters With Oil Hole) Type1. Type3. Type2. Type5. Type4
FMH Face Mill Arbor (For Cutters With Oil Hole) Coolant flows from the end face of centering location to cutter with oil hole. Type2 Type1 Type3 Type4 Type5 Code Model Type D1 L1 C1 C2 H1 B1 K1 C3 H2 Clamp
More information/1505-I-20 TOO L HO L DERS 2015 GM 300
TO O L H O L D ERS A N D C L A M PI N G D E V I C ES 114 996/1505-I-20 ED I T I O N 2015 TOO L HO L DERS 2015 GM 300 high camping ce PERFECT CONCENTRICITY MAXIMUM OPERATIONAL SAFETY OPTIMAL COOLANT DELIVERY
More informationenduring. Drill Chucks NC-Tooling 2013/2014
enduring. Drill Chucks NC-Tooling 2013/2014 www.roehm.biz DRILL CHUCKS - NC-TOOLING Keyless drill chucks EXTRA 1004 EXTRA-RV 1005 SUPRA 1006 SUPRA-SK 1008 SUPRA-SK E 1008 SPIRO - SPIRO-SK 1009 Key-type
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationDirectional Control Valve Series D3W Soft Shift
Characteristics The D3W is a 3-chamber, electrically controlled 4/3 or 4/ way directional control valve. It is activated directly by solenoids with screwed in wet pin armature. The soft shifting of this
More informationOrder No light grey. Order No black
DPP- Plastic dome plug Body: Polyamide (V2 acc. to UL94) Sealing: Neopren Dynamic: -20 ~+80, short term:100 _ Easy and quick assembly Color: RAL7001 silver grey RAL7035 light grey RAL9005 black Blue, Red
More informationPCD & CBN TANGENTIAL MILLING
& TANGENTIAL MILLING CONTENTS Highlights 4 Codifiy 6 Shell Type 7 Cylindrical Type 8 Monoblock Type 9 Inserts 12 Adaptors 18 Setting Procedures 24 Spare Parts 26 Cutting Parameters 31 HIGHLIGHTS HIGHLIGHTS
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationKTA SPINDLE TOOLINGS
Price INR R 2013 KTA SPINDLE TOOLINGS SILVER SERIES PRECISION TOOL HOLDERS FOR CNC MACHINES HSK DIN 69893-1 FORM A Features : Special Material with Tensile NEW 2 strength inthe Core Min 950 N/mm. Case
More informationPENCIL DESIGN. Hydraulic high precision toolholder Pencil version. Benefits and features
PENCIL DESIGN Benefits and features For drilling to finishing Pencil design enabling machining in deep cavities and complex components Special designs possibility High clamping force 6 Nm is with its extreme
More informationWINNER! ALBRECHT. Precision Chucks
WINNER! ALBRECHT Precision Chucks At present, the Albrecht APC is the best performing chuck world wide. In the area of speed, tool life and safety. 3 4 You can expect: A clearly higher chip removal rate
More informationUSE-USU. Steel independent chucks. Steel independent chucks USE-USU
USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationHIGH PRECISION HIGH PERFORMANCE
Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility
More informationClamping technology. MAPAL Floating holder. for multi-bladed high performance reamers NEW
Clamping technology MAPAL Floating holder for multi-bladed high performance reamers NEW 2 Floating holder for MAPAL multi-cutting reamers When using reamers on lathes it is often necessary to compensate
More informationDIN SK40 SK45 SK50. COLLET CHUCK HOLDER Standard Length...44 Extended Length...45 Short...46 TAPPING COLLET CHUCK HOLDER...
IN 69871 SK40 SK45 SK50 COET CHUCK HOER Standard ength...44 Extended ength...45 Short...46 TAPPING COET CHUCK HOER........ 47 SHRINK FIT HOER...48 SIE OCK HOER Short & Standard ength...49 FACE MI ARBORS...50
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationHSK F80 MAKINO S HRINK FIT C H UCK S
Haimer F80 Makino 4.5 HSK F80 MAKINO S HRINK FIT C H UCK S M6 Thread for balancing screws D1 D2 CERTIFICATE OF QUALITY A 10mm L Adjustable back-up screw with fl ats for coolant drainage from diam. 1/4
More informationO:\Machine Manuals & Spare Parts Lists\Commercial Cold Water Electrical\HD2.3-14CEd PL Page 1
HOUSING 1.0 1 5069-1210 Device cover 1 1 5069-2020 Device cover 1 2 6304-0990 Saucer-head screw M 6x 18-4.8-R2R 1 3 6310-0530 Putting nut 1 4 5050-2060 Frame front part 1 4 5050-2860 Frame front part 1
More informationLIFTKET wire rope winch with wall bracket or foot support
Issue August 2014 Spare part list LIFTKET wire rope winch LSF 175/1-19 LSF 200/1-15 LIFTKET wire rope winch with wall bracket or foot support SP-Code Description Description of spare part section Page
More informationLow Pressure Series KL
Low Pressure 35 Nom. Type Material Max. static working C v value Cross Page bore pressure at 20 C both sides one side both sides one side section [bar] [psi] self sealing self sealing [mm 2 ] 6 KL-006
More informationHigh Frequency Spindles
High Frequency Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Table of Contents Introduction
More information1 Collets and collet sleeves
1 1.3 Wibemo - Honing sleeve 1.4 Wibemo - Extenso collets 1.6 Wibemo - Croco collets 1.10 Wibemo - CuBe collets 1.11 Wibemo - Phenol collets 1.12 Custom made collets 1.18 Wibemo - Wifex collets 1.22 Tornos
More informationType2. Caution. l2 L1 L2 kg Spanner BT30 -CT16A
CT A Tite-Lock Milling Chuck Slim design milling chuck. Clicking sound tells completion of clamping. Type1 Type2 Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit Tapping Chuck Arbors
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationIntroduction 3. Motorized Milling, Drilling and Tapping Spindles 5. Motorized Grinding Spindles 6. Motorized Air Bearing Spindles 8
High Spindles 344 Bloor Street W, Suite 607, Toronto, ON Canada M5S 3A7 www.lprglobal.com www.uskoreahotlink.com Tel.: +1 416-423-5590 E-Mail: info@lprglobal.com Contents Introduction 3 Motorized Milling,
More informationTorque overview for series 10 / 22 / 35 / 40 / 51
Content 1. General... 3 2. General screw torque for metric screws... 4 3. Mounting torque series 10 plug locking sleeve... 5 3.1. Mounting torque series 10 fastening / jam nut... 5 3.2. Mounting torques
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in Shuttle valves SSR -2 Check valves, direct operated
More informationRotary inlets for pressurised oil, compressed air
Rotary inlets for pressurised oil, compressed air Product data sheets Rotary inlets for pressure oil, single channel 0086-010-size-160 9.03.00 Rotary inlets for pressure oil, two- channel 0088-226/326-size-010040
More informationGTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
More informationHigh Speed Jet Spindle
1/28 High Speed Jet Spindle 2/28 High speed jet spindle TaeguTec has launched a revolutionary new high-speed spindle developed for applications using high RPM for small diameter tools that can be used
More informationTechnical Data, Dimensioning, Mounting
6 Bosch Rexroth AG R310EN 3105 (2005.06) and Shafts Technical Data, Dimensioning, Mounting Speed v max = 5 m/s Acceleration a max = 150 m/s 2 Operating temperature 20 C to +100 C Dimensioning The load
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Subplate Screw-in Slip-in SSR RK / RB CS SPZBE SPV / SPZ C4V CPS C4V D4S
More informationVane Air Motors - P1V-B
Vane Air Motors - P1V-B These large motors are designed for use in the most arduous applications, requiring considerable power, torque, robustness and reliability Operating information Working pressure:
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationACE LOCK Milling Chucks
ACE LOCK Milling Chucks Run-out accuracy: 10 µm/0.0004 at the distance of 100 mm/4.00 from the end of the holder. Milling Chucks Spiral slits are precision-machined with a laser securely hold the cutter
More informationSpare part list 2015 MAB 825 Motor Drawing
MAB 825 Motor Drawing MAB 825 Motor Pos. No. Article no. Description pc 1.1.1 5013911 Armature 110V 1 1.1.2 5050061 Armature 230 V 1 1.2.1 5012551 Field coil 110 V 1 1.2.2 5011611 Field coil 230V 1 1.3.1
More informationHYDRAULIC NUT HMV..EBF
HYDRAULIC NUT HMV..EBF INSTRUCTIONS FOR USE www.ntn-snr.com With You Warning PRESSURE MAX HMV EBF 10-25 700 bar HMV EBF 26-40 550 bar HMV EBF 41-60 450 bar HMV EBF 62-100 400 bar HMV EBF 102-120 350 bar
More informationGeared scroll chucks with independently adjustable jaws
Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,
More informationSimulator switch, magnetic operation
Description Single pole, miniaturised aircraft simulator switch with extremely fast magnetic trip time. Blade, screw and wire wrap terminals. Aircraft style threadneck and push/pull button with white trip
More informationShrinkage method clamps a cutting tool firmly by heating and cooling the chuck. High precision and strong Clamping force.
SRS Shrinkage method clamps a cutting tool firmly by heating and cooling the. High precision and strong Clamping force. (Slim Type) Milling Chuck Collet Holder "R" Zero Holder Hydraulic Chuck Shrink Fit
More informationGN 23. Stainless Steel-Levelling feet
GN 23 Stainless Steel-Levelling feet technical informations Specification Type (Base plate) - Type D0: fine turned, without rubber underlay - Type D1: fine turned, with rubber underlay, inlaid, black Version
More informationIT.TE.DI. Milling. TEDI MILL The Perfect Answer. TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters
IT.TE.DI. Milling 03 TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters TEDI MILL Cartridges 04 08 14 20 TEDI MILL The Perfect Answer TEDI MILL CBN Shell Type Face Mill Cutters Integral
More informationZG-ZS. Geared scroll chucks. Geared scroll chucks ZG-ZS
The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high runout accuracy and very high repeatability are required. For use on
More informationSupplementary instructions. Water cooling - MINITRAC 31. Active water cooling system for radiationbased. Document ID: 48522
Supplementary instructions Water cooling - MINITRAC 31 Active water cooling system for radiationbased sensors Document ID: 48522 Contents Contents 1 Product description... 3 1.1 Configuration... 3... 4
More informationSpare part list 2015 MAB 845 Motor Drawing
MAB 845 Motor Drawing MAB 845 Motor Article no. Description pc 1.1.1 5013911 Armature 110V 1 1.1.2 5050061 Armature 230V 1 1.2.1 5012551 Field coil 110V 1 1.2.2 5011611 Field coil 230V 1 1.3.1 5050051
More informationZGU-ZSU heavy design. Geared scroll chucks. Geared scroll chucks. ZGU-ZSU heavy
ZGU-ZSU heavy design Type 303 3-jaw-chuck cylindrical centre mount The spiral ring chuck - a proven and universal suitable clamping system - finds it s application wherever a high clamping force, high
More informationModular Spindle Technology. Productivity Solutions.
Modular Spindle Technology Productivity Solutions Kuvam s Phylosophy: We at Kuvam Technologies believe in win~win~win relationship i.e. Win for the customer, Win for the team and Win for the company. WIN
More informationSPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół. Sokółka 20...
SPARE PARTS CATALOGUE SELF-LOADING BALE WRAPPER Z-577 Sokół Sokółka 20... LIST OF CATALOGUE ITEMS No. Table title Page number 1. Complete lower frame 3 2. Wrapping film feeder 9 3. Movable frame 13 4.
More information3/2 Way Ball Valves KHB3K
/ Way Ball Valves KHBK Model code (also order example) KHBK G / L 0 X A... Designation KHBK = / way ball valve Type of connection G = Whitworth female thread ISO 8 LR = Pipe connection light range DIN
More informationWhat is HSK-T? HSK T. Feature. Compatible with HSK-A. Increased cutting accuracy at turning process. Compatible
What is HSK-T? HSK-T interface was developed to maximize cutting ability of multi-tasking machines. HSK-T interface became ISO standard (ISO121 164-3:2008) in 2008. Feature Compatible with HSK-A HSK-T
More informationTechnical Notes To DIN 933, ISO 4017.
Hexagon Head Bolts wit tread up to ead, DIN 933, 6101 d l A/F A0013.A6 6101 To DIN 933, ISO 4017. Order No. Tread l A/F Finis A0013.050-020-A6-00 M 5 20 3,5 8 unfinised A0013.050-025-A6-00 M 5 25 3,5 8
More informationIT.TE.DI. Milling. TEDI MILL The Perfect Answer. TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters
IT.TE.DI. Milling 03 TEDI MILL PCD Shell Type Face Mill Cutters Integral Face Mill Cutters TEDI MILL Cartridges 04 08 14 20 TEDI MILL The Perfect Answer TEDI MILL CBN Shell Type Face Mill Cutters Integral
More informationA44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting
> > Ø 25... 40 mm > > New compact, spacesaving design > > Proven sealing system > > Integral switch mounting > > uffer or adjustable cushioning > > Standard foot mountings Technical features Medium: Compressed
More informationGRIPPERS & ACCESSORIES CATALOGUE
GRIPPERS & ACCESSORIES CATALOGUE CONTENTS TOOL STANDARDS... 4 MEDIUM TRANSFER... 5 STEEP TAPER 30... 6 STEEP TAPER 40... 8 STEEP TAPER 50... 10 STEEP TAPER 50 REINFORCED... 12 INDIVIDUAL COMPLETE SOLUTIONS
More informationCollet Chuck manual 08/2010
Collet Chuck manual 08/2010 Contents: FNP manual collet chuck...4/5 draw-back type W20 / W25 / 5C / B32 / 386E FNP manual collet chuck...6/7 draw-back type B45 FNH manual collet chuck...8/9 draw-back
More informationArbours for PSC Polygon Shank Tooling
Arbours for Polygon Tooling CAT V-FLANGE to Taper CV 40 Designation L L1 kg SPECIAL CV40ADB--1.57 1.57.827.95 CV40ADB-50-1.97 50 1.97 1.22 1.00-69871 -AD Taper to Designation L L1 kg SPECIAL 40 69871-A40-50-1.18
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More informationPRM2-06. Functional Description HA /2014. Proportional Directional Control Valves. Replaces HA /2013. Size 06 p max 350 bar Q max 40 L/min
Proportional Directional Control Valves Size 06 p max 50 bar Q max 40 L/min PRM-06 HA 5104 /014 Replaces HA 5104 /01 Compact design with integrated High reliability Simple replacement of the exciting coils
More informationSPARE PARTS BOOK STRIPCAT II UNIT AND OPTIONS
SPARE PARTS BOOK STRIPCAT II UNIT AND OPTIONS www.slyfrance.com - sav@slyfrance.com - tel. + 33(0)5 53 40 32 95 - fax + 33(0)5 53 40 61 36 SLY France - La Madeleine - 47210 Bournel OPENER DISC RANGE BIRM
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationMAB 485 MAB 485 MOTOR BREAKDOWN
MAB 485 MAB 485 MOTOR BREAKDOWN 22 23 24 45 46 48 49 47 32 20 21 26 25 27 10 11 17 19 18 34 31 29 30 28 16 31 31 15 2 33 3 4 13 1 40 39 50 14 5 38 37 44 35 41 6 7 8 36 51 9 43 42 05/2006 For a complete
More information8.0. General Components. Product Catalogue. Version. Section PRODUCT CATALOGUE 8.0
PRODUCT CATALOGUE 8.0 Product Catalogue Section A Version 8.0 General Components Section A General Components Index Adjustable Mudguard Mounting A:12 Anti-Luce Fastener - screw end A:13 Anti-Luce Fastener
More informationHead BKA1923F BKA2528F BKA3236 BKA4045 BKA1923F BKA2528F BT40-MD32F-100 BKA3236 BT40-MD40F-115 BKA4045 BT40-MD50F-105 BKA5056 BKA6372 BT40-MD63F-110
FZ Micro Boring Bar BT - BKA MAS3-BT 1DIV. =ø0.02mm BT30 - BKA - 1 BKA - 1 1 BKA - 1 1 BKA - 1 1 BT - BKA - 1 L 1 1 BKA - 1 1 BKA - 160 160 BKA - 15 15 BKA56-175 175 BKA - 1 1 BKA - 0 0 Max.Boring Depth
More informationIndustrial Drill Chucks & Live Centers
Since 1957 Industrial Drill Chucks & Live Centers 2 From our headquarters in the province of Barcelona, Spain, Llambrich Precision, S.L. has been designing and manufacturing drill chucks and machine tool
More informationWSK COLLET CHUCK CHCHUCK WSK COLLETWS UC K K CO LL ET 74
WS K COLLET COLL CO LLET ET CHUC CH UCK 74 MAS403 BT-P CODE NO. D1 D2 L1 COLLET NUT G1 BT30 P6-2.0-6.0 19.6 6 N6 M8X1.0 P10-2.0-10.0 27.5 10 N10 M11X1.0 P6-2.0-6.0 19.6 P6-6 N6 M8X1.0 BT40 P10-2.0-10.0
More informationReaming and Fine Boring
Reaming and Fine Boring MAPAL Competence Reaming and Fine Boring Tool with guide pads Fixed reamers Competence Reaming and Fine Boring Today reaming and fine boring are the most widely used methods for
More informationGlobe valves Shut-off check valve 200 AE/BE PN DN Globe valves Lift check valve 240 MT PN DN 10-50
Globe valves Shut-off check valve 200 AE/BE PN 10-160 DN 10-50 Globe valves Lift check valve 240 MT PN 10-160 DN 10-50 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -200-60
More informationRevision 1.0 Parts List Master
Revision.0 www.grindex.com Parts List 805.8 Master Table of Contents Table of Contents Introduction... Specially products... Product Description...3 The data plate...3 Parts... 4 Exploded view... 4 List
More informationTradition in Perfection.
Angular Heads Tradition in Perfection. For more than 50 years the name ROMAI has stood for the highest precision and process reliability in machining. The next generation begins today. We have succeeded
More informationEdition Subject to change without notice
Spare parts as torch MHS RAUCH-330 water-cooled r2500311 r2500411 r2500511 Torch / 3m EURO central adapter exhaust hose ID38mm Torch / 4m EURO central adapter exhaust hose ID38mm Torch / 5m EURO central
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationNo: En Revision Parts List. Bravo
No: 899370 En Revision.0 200 05 Parts List Bravo 800 852.020 www.grindex.com Parts List Bravo 800 852.020 Overview Table of Contents This publication contains the following topics: Topic Preface... 4
More informationREGO-FIX is a registered trademark. Icons used in this catalog
The products described in this catalog are specified to the best of our knowledge. The data given herein are dependent on the conditions under which they are measured and are derived from tests carried
More informationInline Filter DMG DMG 080 DMG 045 DMG FILTER SPECIFICATIONS. Temperature range -10 C to +100 C Material of filter housing
Inline Filter Flow direction from in to out up to 250 l/min, up to 120 bar 020 045 080 150 250 1. TCHNICAL SPCIFICATIONS 1.1 FILTR HOUSING Design The filter housings are designed in accordance with international
More informationNo: En Revision Parts List. Matador O-RING KIT BASIC REPAIR KIT B_8106_180_expl_view
No: 897386 En Revision 9.0 0 0 Parts List Matador 806.80 www.grindex.com O-RING KIT 80 BASIC REPAIR KIT 90 90 0086B_806_80_expl_view Parts List Matador 806.80 Overview Table of Contents This publication
More informationParts List. MINOR
No: 88600 En Revision 3.0 0 Parts List MINOR 803.80 www.grindex.com 5 8 8 6 7 8 O-RING KIT 80 BASIC REPAIR KIT 90 6-68 5 6 7 9 0 50-5 3 5 6 7 8 9 30 300 39-35 85 303 86 3 33 3 35 36 37 38 83 39 0 8 N 68
More informationHarken limited worldwide warranty - Ordering spare parts
Harken limited worldwide warranty - Ordering spare parts Harken limited worldwide warranty Refer to the Harken Limited Worldwide Warranty in the Harken Catalogue and on the website www.harken.com Ordering
More informationExternal gear pump Series G
External gear pump Series G RE 10 093/04.14 Replace RE 10 093/06.13 AZPG-22 Fixed pumps V = 22.5...100 cm 3 / rev Overview of contents Contents Page General 2 Product overview 3 Ordering code single pumps
More informationHinges Gasketing Handles Stainless Steel Toggle Latches Compression Latches Quarter Turns Rod Controls Locking Systems
Rod Controls Locking Systems Hinges Gasketing Handles Stainless Steel Toggle Latches Compression Latches Quarter Turns Locking Systems Hinges Gasketing Handles Stainless Steel Toggle Latches Compression
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationDATA PD BS7... Spring Brakes (Disc), diaphragm/diaphragm. Product. Function. Technical Features
Commercial Vehicle Systems Product DATA PD-415-200 Function This range of Spring Brakes is used on axles fitted with air disc brakes and provides the service and parking brake functions. The internal wind
More informationO:\Machine Manuals & Spare Parts Lists\HD1090 PL Page 1
PIECE PARTS - parts list 1 50670310 Device cover for replacement 1 2 53214230 Handhold 1 3 73061330 Screw M6x50-8.8-R3R (In6Rd) 2 4 73110030 Hexagon nut M6-8-A2E ISO 4032 2 5 63040990 Saucer-head screw
More informationSOFFIATORE ELIET. BL 450 versione 2 (dal ) ESPLOSO RICAMBI
SOFFIATORE ELIET BL 450 versione 2 (dal 01-02-2001) ESPLOSO RICAMBI Via Spinà, 9 C.P. 103 36033 ISOLA VICENTINA (VI) ITALIA Tel. 0444 977655 r.a. Fax 0444 977200 E-mail info@sabreitalia.com http://www.sabreitalia.com
More informationCONTENTS Adaptors Technical Information Brazed Cutters Cutting Parameters Services 62
CONTENTS 4-19 20-35 Adaptors Technical Information Brazed Cutters Cutting Parameters 36-41 42-53 54-59 60-61 Services 62 Modern machining operations need to rely on the optimization of the production processes:
More information