No: En Revision Parts List. Matador O-RING KIT BASIC REPAIR KIT B_8106_180_expl_view

Transcription

1 No: En Revision Parts List Matador O-RING KIT 80 BASIC REPAIR KIT B_806_80_expl_view

2

3 Parts List Matador Overview Table of Contents This publication contains the following topics: Topic Introduction... 4 Practical Information... 5 Data Plate Interpretation... 6 Order parts... 7 Spare Parts... 8 Parts List, Matador

4 Introduction Purpose The purpose of this manual is to give the reader information about available spare parts and accessories for the product. Recipient The manual is principally intended for Grindex customers service personnel sales personnel Contact For more information contact your Grindex representative visit Reference More information about the product is available in the following documents: Installation, Operation and Maintenance Grindex accessories list 4 Parts List, Matador

5 Practical Information Overview Table of Contents This chapter contains the following topics: Topic Data Plate Interpretation... 6 Data Plate... 6 Order parts... 7 Parts List, Matador

6 Data Plate Interpretation Introduction The Grindex product is always provided with data plates: The general data plate is used on all products. The approval plate is added to all explosion proof products. Data Plate The product may only be operated within the parameters stated on the data plate. Illustration This is an illustration of a general data plate. Field description This table shows the fields on the general data plate, and which information each field contains. Field Description Field Description Pump type number Degree of protection Frequency Maximum capacity 3 Phases, type of current 3 Rated current 4 Rated shaft power 4 Direction of the start reaction 5 Thermal class 5 Direction of the impeller rotation 6 Locked rotor code-letter 6 Maximum head 7 Country of origin 7 Serial number 8 Maximum power consumption 8 Rated voltage 9 Product weight 9 Pump model 0 Maximum submersion depth Parts List, Matador

7 Order parts Order When ordering spare parts, state product number and serial number of the product, spare part number and quantity. Requirements Genuine Grindex parts must always be used for repairs if the product is to fulfill requirements and obtain official approval. Specially Approved Products Spare parts marked with (EX) after the part number are subject to dimensional accuracy inspection. Parts List, Matador

8 Spare Parts NOTE! Parts with position numbers that end with.9xx are NOT included in the unit and must be ordered separately. Pos. No Part. No Denomination 40 0 Hexagon nut M-A Plain washer -A U-ring Stud MX35-A Hexagon head screw MX35-A Plain washer -A Entrance flange Plain washer (33)-35 MM Plain washer (4)-0 MM Plain washer (0)-3 MM 4 40 Seal sleeve (4)-7 MM 40 3 Seal sleeve (7)-0 MM 40 4 Seal sleeve (0)-3 MM 40 5 Seal sleeve (3)-6 MM 40 6 Seal sleeve (6)-9 MM 40 8 Seal sleeve (3)-35 MM Ring O-ring 49.5X3 NBR Cover Air release valve Hex.socket hd screw M6X-A Hex.socket hd screw M8X0-A Cover O-ring 9.3X5.7 NBR Hex.socket hd screw M6X-A Earthing plate Hexagon flange screw M0X45-A O-ring 0.3X.4 NBR Handle compl Hex.socket hd screw M0X5-A Plate-blank Use (EU), (US) as spare part Parts List, Matador

9 Pos. No Part. No Denomination Drive screw 4X5-A El.lead through unit Only for Y/D O-ring 75X3 NBR Stator housing Seal ring Cooling jacket Stator -8-b 50Hz: 400V-45V D, 690V Y. 60Hz: 460V D Stator -8-b 50Hz: 0V-30V D, 400V Y Stator -8-b 50Hz: 500V D. 60Hz: 575V-600V D Stator -8-b 60Hz: 440V-460V YSER, 0V-30V Y// Stator -8-b 50Hz: 000V Y, 550V D Stator -8-b 60Hz: 0V-40V D Stator -8-b 50Hz: 660V Y, 380V D. 60Hz: 440V D Stator -8-b 60Hz: 00V-08V D Stator -8-b 60Hz: 380V-400V D Stator -8-b 60Hz: 30V D//, 380V Y//, 460V DSER Spring washer 7.5X59X O-ring 7.X3 FPM Ball bearing 3306A- Z/C3VT Shaft unit Bearing holder Hexagon head screw Supporting washer 40X50X.5-SPRING STEEL Ball bearing 3308A- Z/C3VT Retaining ring SGA Retaining ring JB O-ring 75X3 NBR Spring ring, solid O-ring 09.3X5.7 NBR Inspection screw O-ring 9.X3 NBR Adapter O-ring 0.3X.4 NBR Hexagon flange screw M0X45-A Parts List, Matador

10 Pos. No Part. No Denomination O-ring 359.3X5.7 NBR Mechanical seal Pressure equalizer O-ring 46.0X4.0 NBR O-ring 84.4X4 FPM O-ring.6X.9 FPM Seal housing cov.coa Hex.socket hd screw M8X30-A Protective plug Sleeve Adjustment screw Impeller 50Hz, H Impeller 60Hz, H Impeller 50Hz, N Impeller 60Hz, N Plain washer -A Hexagon head screw MX80-A Diffuser coat. H Diffuser coat. N Plain washer -A Hexagon head screw MX0-A-7O O-ring 89.3X5.7 NBR N O-ring 9.3X5.7 NBR H Suction cover H Suction cover N Plain washer -A Hexagon head screw MX35-A Damper complete Strainer Hexagon nut M-A O-ring 60.0X4.0 NBR Hex.socket hd screw M6X35-A O-ring 6.X.6 NBR Terminal plate unit CONTACTOR UNIT 50Hz: 0V 40V D. Only for DOL, Softstarter Parts List, Matador

11 Pos. No Part. No Denomination Hex.socket hd screw M4X6-A Lock nut Lock nut M6-A Hex.socket hd screw M6X0-A Hex.socket hd screw M6X0-A Overload relay Contactor Single-core cable Cable set Holder Holder Motor protector SMART Connection plate Ordered separately CONTACTOR UNIT 50Hz: 0V - 30V D Hex.socket hd screw M4X6-A Lock nut Lock nut M6-A Hex.socket hd screw M6X0-A Hex.socket hd screw M6X0-A Overload relay Contactor Single-core cable Cable set Holder Holder Motor protector SMART Connection plate Ordered separately CONTACTOR UNIT 50Hz: 380V - 400V D Hex.socket hd screw M4X6-A Hex.socket hd screw M4X6-A Lock nut Lock nut Overload relay Contactor 80 Parts List, Matador

12 Pos. No Part. No Denomination Single-core cable Cable set Holder Motor protector SMART Connection plate Ordered separately Cable set Ordered separately CONTACTOR UNIT 50Hz: 45V - 440V D Hex.socket hd screw M4X6-A Hex.socket hd screw M4X6-A Lock nut Lock nut Overload relay Contactor Single-core cable Cable set Holder Motor protector SMART Connection plate Ordered separately Cable set Ordered separately CONTACTOR UNIT 50Hz: 500V D Hex.socket hd screw M4X6-A Hex.socket hd screw M4X6-A Lock nut Lock nut Overload relay Contactor Single-core cable Cable set Holder Motor protector SMART Connection plate Ordered separately Cable set Ordered separately CONTACTOR UNIT 50Hz: 380V 400V Y/D Hex.socket hd screw M4X6-A Lock nut Contactor Parts List, Matador

13 Pos. No Part. No Denomination Holder Holder Rail Overload relay Cable tie Time relay Cable set Cable set Motor protector SMART Connection plate Ordered separately Flat pin sleeve 0,5-,65MM Ordered separately CONTACTOR UNIT 60Hz: 460V Y/D Hex.socket hd screw M4X6-A Lock nut Holder Holder Rail Overload relay Cable tie Time relay Contactor Cable set Cable set Motor protector SMART Connection plate Ordered separately Flat pin sleeve 0,5-,65MM Ordered separately CONTACTOR UNIT 60Hz: 30V - 40V D Hex.socket hd screw M4X6-A Lock nut Lock nut M6-A Hex.socket hd screw M6X0-A Hex.socket hd screw M6X0-A Overload relay Contactor Single-core cable Cable set Holder 80 8 Parts List, Matador

14 Pos. No Part. No Denomination Holder Motor protector SMART Connection plate Ordered separately Cable set Ordered separately CONTACTOR UNIT 60Hz: 380V - 400V D Hex.socket hd screw M4X6-A Hex.socket hd screw M4X6-A Lock nut Lock nut Overload relay Contactor Single-core cable Cable set Holder Motor protector SMART Connection plate Ordered separately Cable set Ordered separately CONTACTOR UNIT 60Hz: 440V - 480V D Hex.socket hd screw M4X6-A Lock nut Overload relay Contactor Single-core cable Holder Cable set Motor protector SMART Connection plate Ordered separately Cable set Ordered separately CONTACTOR UNIT 60Hz: 575V - 600V D Hex.socket hd screw M4X6-A Hex.socket hd screw M4X6-A Lock nut Lock nut Overload relay Contactor Single-core cable Parts List, Matador

15 Pos. No Part. No Denomination Cable set Holder Motor protector SMART Connection plate Ordered separately Cable set Ordered separately CONTACTOR UNIT 60Hz: 380V - 400V D. Not CSA approved Hex.socket hd screw M4X6-A Hex.socket hd screw M4X6-A Lock nut Lock nut Overload relay Contactor Single-core cable Cable set Holder Motor protector SMART Connection plate Ordered separately Cable set Ordered separately CONTACTOR UNIT 60Hz: 440V - 480V YSER Hex.socket hdscrew M4X6-A Lock nut Overload relay Contactor Single-core cable Holder Cable set Motor protector SMART Connection plate Ordered separately Cable set Ordered separately Closed end splice ;(AWG 8-8) L=38 Ordered separately Softstarter Softstarter STARTER ONLY Motor cable 4G.5+X.5 MM OD= Motor cable 4G4 MM OD=6-7 MM 80 4 Parts List, Matador

16 Pos. No Part. No Denomination Motor cable 4G4+X.5 MM OD=0- MM Motor cable 7G4+X.5 MM OD=-6 MM Motor cable 4G6 MM OD=8-9MM Motor cable 4G6+X.5 MM OD=3-5 MM Motor cable 7G6+X.5 MM OD=4-8 MM Motor cable 4G0 MM OD=3-5.5MM Motor cable 4G0+X.5 MM OD=6-8MM Motor cable 4G6 MM OD=6-8MM Motor cable 4G6+X.5 MM OD=6-8MM End sleeve.5 MM; L=7 MM Ordered separately Motor cable 0AWG/4 OD=8-9.7 MM Motor cable 0AWG/3---GC OD=0-MM Motor cable 8AWG/4 OD=4-6MM Motor cable 8AWG/3---GC OD=7-9 MM Motor cable 4AWG/3---GC OD=33-35 MM End sleeve 4MM; L=0MM Ordered separately End sleeve5mm;l=5mm Ordered separately End sleeve 0 MM; L= MM Ordered separately Motor cable SCREEN 6X.5MM OD= Shrink hose ID 6.4 Ordered separately Motor cable SCREEN 3X.5+3X Shrink hose ID 6.4 Ordered separately Closed end splice 3-6(AWG -0) L= Motor cable SCREEN 3X6+3X6 OD=0-3MM Ordered separately Shrink hose ID 6.4 Ordered separately Closed end splice 3-6(AWG -0) L=8 Ordered separately Parts List, Matador

17 Pos. No Part. No Denomination Motor cable SCREEN 3X0+3X0 OD= Shrink hose ID 9.5 Ordered separately Closed end splice 3-6(AWG -0) L= Discharge connection DN 00 HOSE 4" Discharge connection ISO G4" OUTER Coupling part DN 00 G4" INNER STORZ Discharge connection VICTUALIC 4" Discharge connection DN 00 NPT 4-8 OUTER Discharge connection DN 50 HOSE 6" Discharge connection ISO G6" OUTER Coupling part DN 50 G6 INNER STORZ Discharge connection VICTUALIC 6" Discharge connection DN 50 NPT 6-8 OUTER Ordered separately. Ordered separately. Ordered separately O-ring kits Contains all position numbered O-rings Zinc anode set Basic repair kit Ball bearing 3306A- Z/C3VT Ball bearing 3308A- Z/C3VT Pressure equalizer Mechanical seal O-ring kits Contains all position numbered O-rings Plug contact V 3-PH 63A CEE 5P Plug contact V 3-PH 3A CEE 4P Phase shifter 0-575V 0-48A Adapter unit H Adapter unit WITH EXTENDER N Quantity per meter 80 Parts List, Matador

18 Grindex AB Box 705 SE Sundbyberg Sweden Tel Fax marketing@grindex.com Grindex AB. The original instruction is in English. All non-english instructions are translations of the original instruction.