Series GB N... S Single Nozzles, Valve Gate Ø16. Company. Products. A Application. T Technology
|
|
|
- Collin Barnett
- 5 years ago
- Views:
Transcription
1 eries GB... ingle ozzles, Valve Gate Ø ompany roducts echnology pplication
2 roduct type Hot runner nozzles in the GB... range; this series belongs to nozzle class. ozzle size : Flow boreø mm ozzle style : ingle nozzle eries GB... ingle nozzles, valve gate With the nozzle tips in the form of screwin parts, different nozzle types can be implemented (type = shape and gating of nozzle tip), see table at right. vailable gating types valve gate ( V) Major dimensions J D Dt H Flow bore Ø ozzle length Ø of cut out, front entring Ø tip Hot runner exit Ø 1 ength of cut out, back D1 Ø of cut out, back K Head height Dk Head Ø s Depth of head centring Ds Ø of head centring R ozzle contact radius D ozzle contact angle Ø 4) Ø48 see right see right 5)...17 Ø56 5) Ø144 9 Ø /12 Heating externally heated, 23 V Zonen, W Fe/ui thermocouple, DI 4371 pplication For all usual thermoplastics Max. shot weight per nozzle (g) 15 (low viscosity) Y U F hape of nozzle tip 1 s vailable nozzle types for this series Gating of nozzle tip (open) (open with torpedo) V (valve gate) K YV H: 5. Dt: Ø 2 Without being directly cooled the nozzle can be used up to a mould temperature of 8. For higher temperatures the associated cooling unit has to be used. K For further information about the cooling unit and also about details on the needle actuator (pressure, stroke etc.) please see section Flow ontrol Valve Gate omponents 4) 5) page no. of related data sheets nhanced classification for improved ease of selection. art of the nozzle type o. for later nozzle series. tandard value resp. average diameter of nozzle range, can be different depending on nozzle series and application. Raster dimensions. Intermediate values can be found from the prescribed dimensional raster. Minimum and maximum value of nozzle length depend on the selected tip shape. depending on nozzle length V W X V H: 5. Dt: Ø 2 V H: 5. Dt: Ø 2 VV H: 5. Dt: Ø 2 WV H: 5. Dt: Ø 22 XV H: 4. / 5. Dt: Ø ll rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. 1 / 9 For details and application information, see the ynventive Hot Runner Guide.
3 eries GB... ut out in mould plate for nozzle and connections 1. ut out for the nozzle 1 ozzle length ength of cut out, back Ø.2 General tolerances: urfaces: DI IO 2768mK ( ) 4.5 x Values of the dimensions and 1 can be found in the data sheet for the selected nozzle type. ± B B 2. ut out for connections electrical power thermocouple 2 54 a) b) 3. Groove for locking pin he locking pin secures the nozzle against rotation , ut out for the nozzle tip a) b) hrough bore nozzle tip (Y...V) Blind bore nozzle tip (W, X) 4 a) b) Dt H ip Ø Hot runner gate Ø Depending on the selected nozzle type, different cut outs are required for the nozzle tip. he dimensions of the cut out for the nozzle tip used can be found in the nozzle data sheet hese data apply for valve gate nozzles. Ø.2 Ø.2 Ø ll rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. 2 / 9 For details and application information, see the ynventive Hot Runner Guide.
4 YV GB Y1 ingle nozzle, valve gate 1. omplete the nozzle description GB Y1 eries & ype 2. election of variables ength = D= equal to the value of the length for this series xample and explanations eries GB Y1 eries & ype ype osition in nozzle 48 ength = Y 1 48 ozzle tip shape Y for materials with narrow to medium process window 5. D= 4 12 ut out in mould plate ooling required he front of the nozzle tip must always be against plastic. DI IO 2768mK 5. ength 1 2 R D ( ) omenclature differences between older and Depending on the nozzle series, the length he numbering of the heating zones starts at ll rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. 3 / 9 see the ynventive Hot Runner Guide.
5 V GB 1 ingle nozzle, valve gate 1. omplete the nozzle description GB 1 eries & ype 2. election of variables ength = D= equal to the value of the length for this series xample and explanations eries GB eries & ype 1 ype osition in nozzle 48 ength F max = 1 48 ozzle tip shape for materials with narrow to medium process window D= min ut out in mould plate ooling required he front of the nozzle tip must always be against plastic. DI IO 2768mK 5. ength 1 2 F G ( ) R D ( ) omenclature differences between older and Depending on the nozzle series, the length he numbering of the heating zones starts at ll rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. 4 / 9 see the ynventive Hot Runner Guide.
6 V GB 1 ingle nozzle, valve gate 1. omplete the nozzle description GB 1 eries & ype 2. election of variables ength = D= equal to the value of the length for this series xample and explanations eries GB 1 eries & ype ype osition in nozzle 52 ength F max = 1 52 ozzle tip shape for materials with medium to wide process window D= min ut out in mould plate ooling required he front of the nozzle tip must always be against plastic. DI IO 2768mK 5. ength 1 2 F G ( ) R D ( ) omenclature differences between older and Depending on the nozzle series, the length he numbering of the heating zones starts at ll rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. 5 / 9 see the ynventive Hot Runner Guide.
7 V V GB V1 ingle nozzle, valve gate 1. omplete the nozzle description GB V1 eries & ype 2. election of variables ength = D= equal to the value of the length for this series xample and explanations = GB V1 V 59 eries eries & ype 1 5. ype ozzle tip shape V for materials with medium to wide process window 15 osition in nozzle 59 ength D= F max min ut out in mould plate ooling required he front of the nozzle tip must always be against plastic. DI IO 2768mK 5. ength 1 2 F F = / 15 / 3 G ( ) F = 5 / R D ( ) omenclature differences between older and Depending on the nozzle series, the length he numbering of the heating zones starts at ll rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. 6 / 9 see the ynventive Hot Runner Guide.
8 WV GB W1 ingle nozzle, valve gate 1. omplete the nozzle description GB W1 eries & ype 2. election of variables ength = D= equal to the value of the length for this series xample and explanations eries GB W1 eries & ype ype osition in nozzle 52 ength = W 1 52 ozzle tip shape W Version 1: for materials with medium to wide process window 5. D= ± warm 12 ut out in mould plate ooling required DI IO 2768mK 5. ength 1 2 R D ( ) omenclature differences between older and Depending on the nozzle series, the length he numbering of the heating zones starts at ll rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. 7 / 9 see the ynventive Hot Runner Guide.
9 WV GB W2 ingle nozzle, valve gate 1. omplete the nozzle description GB W2 eries & ype 2. election of variables ength = D= equal to the value of the length for this series xample and explanations eries GB W2 eries & ype ype osition in nozzle 55 ength = W ozzle tip shape W 2 Version 2: for wide process window when installation space is limited D= max. R.5 ± warm warm ut out in mould plate ooling required DI IO 2768mK 5. ength 1 2 R D ( ) omenclature differences between older and Depending on the nozzle series, the length he numbering of the heating zones starts at ll rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. 8 / 9 see the ynventive Hot Runner Guide.
10 XV GB X1 ingle nozzle, valve gate 1. omplete the nozzle description GB X1 eries & ype 2. election of variables ength = D= equal to the value of the length for this series xample and explanations = 52 eries GB X1 eries & ype X 1 5. ype ozzle tip shape X D= 52 Version 1: for materials with medium to wide process window osition in nozzle ength ± warm ut out in mould plate ooling required DI IO 2768mK ength 1 2 R D ( ) ll rights reserved. rrors and omissions excepted. For a specific application, please consult ynventive. 9 / 9 see the ynventive Hot Runner Guide.
11 U ustralia diepro@optusnet.com.au BR Brasil Brazil +55 () synventive@uol.com.br anada eople's Republic of hina lutek@lutek.ca ahmed@dccnet.com infohrcn@synventive.com Z zech Rebpublic infohrcz@synventive.com D Germany +49 () infohrde@synventive.com DK Denmark infohrsc@synventive.com pain infohres@synventive.com FI Finland +358() cle@clegroup.fi FR France +33 () infohrfr@synventive.com GB Great Britain +44 () infohruk@synventive.com I Israel adb2@barak.net.il I India infohrin@synventive.com I Italy infohrit@synventive.com J Japan jminamizono@synventive.com he etherlands +31 () infohrnl@synventive.com oland +48 () infohrpl@synventive.com ortugal infohrp@synventive.com G ingapore infohrsg@synventive.com K lovak Republic +421 () infohrsk@synventive.com U United tates of merica info@synventive.com
Series 12 S01 V Single Nozzles, Valve Gate Ø12. P Products. C Company. T Technology. A Application
eries 1 ingle Nozzles, alve Gate ompany roducts echnology pplication eries 1 ingle nozzles, valve gate roduct type ot runner nozzles in the 1... range; this series belongs to nozzle class 1). ènozzle size
Manifold Nozzles, Threaded Ø Company. Products. Technology. Application
eries 20 Hot 07 Runner 01 Nozzle Manifold Nozzles, readed Ø10-20 ompany roducts ecnology pplication eries 20 Manifold nozzles, treaded, open / closed / valve gate roduct type èhot Runner Nozzle, (treaded)
Manifold Nozzles, Sliding Fit Ø8-20. Company. Products. Technology. Application
eries R0 Hot 07 01 Runner Nozzle Manifold Nozzles, liding Fit Ø8-0 ompany roducts ecnology pplication roduct type eries R0 Manifold nozzles, sliding fit, open / closed / valve gate Hot runner nozzle, R
Synventive Molding Solutions About us - in brief
bout us - in brief ompany roducts echnology pplication bout us - in brief Dear Reader bout us could be: too detailed, too long or too much. In this time of information overload when we are often puzzled
Series 09SVP Single Axis Valve Gate Nozzle
Series 09SVP Single Axis Valve Gate Nozzle Stabilize your Process CAT-01-0065_EN-Rev03 EN 01 / 2018 Product Description - Technical Data NOTICE Valve Pin Operation Operation medium Pressure range Flowrate
14 Annex Units used. Annex. Symbol Name Physical quantity Electricity Ω Ohm Resistance KΩ Kiloohm Resistance MΩ Megaohm Resistance W Watt Power
14 14.1 Units used Symbol Name hysical quantity Electricity Ω Ohm Resistance KΩ Kiloohm Resistance MΩ Megaohm Resistance W Watt ower ime min. Minute ime s Second ime emperature Degree elsius emperature
Series V-37 Hot Runner Manifold
H O R U N N E R E H N O L O G Y Series V-7 Hot Runner Manifold 6 7 Stabilize your rocess atalog Document -0-0005_EN-Rev0 EN 05/06 6 H7 Series V-7 Hot Runner Manifold roduct ype V-7 manifold for open flow
Series V-42 Hot Runner Manifold
H O R U N N E R E H N O L O G Y Series V- Hot Runner Manifold 50 Stabilize your rocess atalog Document -0-000_EN-Rev0 EN 05/06 Series V- Hot Runner Manifold roduct ype V- manifold for open flow bore. Hot
Position Sensor Instruction Manual / Installation Guide
osition Sensor Instruction Manual / Installation Guide SV-07-0001_-Rev03 ompany echnology roducts pplication 08/ 2015 able of ontents 1 Service for the osition Sensor...3 1.1 ools for the osition Sensor
Hot Runner Manifold Series V-50 Catalog
U C ot unner Manifold Series V-50 Catalog 60 50 Stabilize your Process CA-02-0007_-ev04 06 / 2018 U U C ot unner 12 Manifold System Series Information V-50 ot unner System - Bolt Down Manifold Product
8.2 Service of the Actuator HYC4018M Series
8.2 Service of the ctuator HY4018M Series 8.2.1 echnical Data HY4018M03-F/-R, HY4018M04-F/-R, HY4018M05-F/-R ctuator, bolted to manifold. Valve pin operation Operation medium Operating pressure ressure
10.7 Single Valve Gate Nozzle GAN...S01
Single Valve Gate Nozzle GN...S01 10.7 Single Valve Gate Nozzle GN...S01 10.7.1 echnical Data - Single Valve Gate Nozzle GN...S01 Doc003429.png Single Valve Gate Nozzle Valve pin operation Operation medium
10.12 Sprue Bushing 12S Series
10.12 Sprue Bushing 12S Series lways tighten the screws to the torque specified in the respective table in section 13. Hazard of ressurized ir ressurized air blow can result in hot plastic or foreign bodies
High-current Test Probes
Technical Information Contents High-current Test Probes High-current Test Probes H-118 104 H-120 105 In the case of high-current Test Probes, the plunger is split in two sections. During the stroke movement,
10.6 Single Valve Gate Nozzle 16S01_V
Single Valve Gate Nozzle 16S01_V 10.6 Single Valve Gate Nozzle 16S01_V 10.6.1 echnical Data - Single Valve Gate Nozzle 16S01_V Doc003304.png Single Valve Gate Nozzle including ctuator HY2314S01 Valve pin
CN Applicable Insert Holders DCLN Type / PCLN Type C7 PCBN Type / PCFN Type C8
1 to 38 - Holder eries 2 Holder Identification and utting dge ositional imensions 4 -ouble lamp ype 6 egative Applicable Insert ype / ype 7 ype / ype 8 ositive Applicable Insert ype 9 egative Applicable
Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines
Slide Bearings Type EM 9S For Shaft Diameters 80, 90, 100 mm Main Application Field Electric Machines Centre flange mounted slide bearing type EM 9S The RENK EM 9S bearing is a fully self-contained, centre
Hydraulic Pump T7AS/T7ASW Series Vane Pumps
Hydraulic ump T7A/T7AW eries Vane umps ressure up to 3 bar Fixed Displacement from 6 to 4 ml/rev. Catalogue HY29-8/UK April 26 Catalogue HY29-8/UK General Characteristics General T7A T7AW Vane umps T7A
i10 Lock Safety Locking Devices Highly flexible with narrow shape
U i10 ock afety ocking evices ighly flexible with narrow shape i10 ock ighly flexible with narrow shape he i10 ock safety switch forms part of the product family of safety locking devices. ts narrow shape
Large bore size cylinder SCS2 Series
Large bore size cylinder C2 eries ew product LGE BOE IZE CYLIDE C2 EIE Large Mass eduction! 50% mass reduction by using aluminum for covers and tubes CC-1118 2 oh compliant Large Mass 50% mass reduction
ISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, 4 IO tandard ydraulic ylinder eries Nominal pressure a/ a
Auxiliary valves PLC series Direct-acting pressure relief valves
uxiliary valves LC series Direct-acting pressure relief valves Catalogue HY17-872/UK ugust 25 Catalogue HY17-872/UK Contents LC series List of contents age General Information... 3 LC53... Single housing
FlowControl. Smart & Effective. Stabilize your Process
FlowControl Smart & Effective Stabilize your Process FlowControl Demanding visual appearance with precise dimensional stability Gloss level, evenly textured surfaces, color uniformity and aesthetics, are
ISO Standard Hydraulic Cylinder
IO tandard ydraulic ylinder eries / eries eries Nominal pressure: a ore size :,,,, Q N Related quipment - Nominal pressure: a ore size : 3,,,,, ourtesy of teven ngineering, Inc.- Ryan Way, outh an rancisco,
Hot Runner Guide Layout and Design
H O T R U N N E R Layout and Design Stabilize your Process CAT-14-0001_EN-Rev05 EN 11/2017 T E C H N O L O G Y Layout and Design The purpose of this The - Layout and Design is intended to help everyone
50/11 Automatic horizontal sliding landing door
0/11 Automatic horizontal sliding landing door Residential ow - medium Commercial ow - medium ervice lifts DOC-FECMCBP0R00EN ONGOING VERION: 03-10-201 ENG www.fermator.com Door configuration IFT APPICATION
CombiTemp Temperature Measuring System
CombiTemp Temperature Measuring ystem Flexible building block concept All wetted parts in acid-proof, stainless steel ome hygienic connections conform to -A standards, FDA demands and EHEDG guidelines
8.5 Service of the Actuator PNC4508M02 Series
8.5 Service of the ctuator N4508M02 Series 8.5.1 echnical Data N4508M02-F, N4508M02-R Doc003635.png Doc003653.png () (B) () LOSED O OOLING ctuator, bolted to manifold. Valve pin operation Operation medium
Spritzgiessautomaten. Innovative into the future. Data and Equipment
Spritzgiessautomaten Innovative into the future Data and Equipment Compact range BOY has become the specialist in the manufacturing of injection moulding machines with clamping forces up to 1,000 kn. BOY
Slide Bearings Type HG
Innovative Power Transmission Slide Bearings Type HG Slide Bearings Type HG Type HG Slide Bearings Slide Bearings Type HG Locating bearings for horizontal hydro turbines operate under high axial loads,
Plate Actuation System
Plate Actuation System Actuators above Actuation Plate Assembly Guide Stabilize your Process SVC-17-0035_-Rev03 09 / 2018 Introduction Dear Customers, Thank you for purchasing a Synventive Plate Actuation
-Shape the Future with Manufacturing Technology
-Shape the Future with Manufacturing Technology GmbH & Co. KG Wilhelm-Harting-Straße 1 D-32339 Espelkamp Tel. 05772/47-97500 Fax 05772/47-537 Internet: www.--.com E-Mail:.applied@.com P. 1 / 18 in Germany
Precision target wheel ZAx / ZFx made of ferromagnetic steel
Precision target wheel ZAx / ZFx made of ferromagnetic steel Technical information Version 0. General 40 years of experience in the manufacture of precision target wheels Precision target wheels for attachment
Axial Piston Variable Pump A18VLO
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics ervice Axial Piston Variable Pump A18VLO RE 92280/06.09 1/12 Replaces: 02.09 Data sheet eries 10 ize NG80 Nominal
Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled
Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Bolt shut-off with integrated 2-way actuator pneumatically
EMechanically Operated Directional Valves
E DIRECIONL CONROLS Cam Operated Directional Valves hese valves may be used to shift the direction of oil flow by depressing the spool by way of a cam. Specifications Max. Operating Max. -Line Max. Flow
Axial Piston Fixed Pump A17FNO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice Axial Piston Fixed Pump A17FNO RE 91510/03.10 1/12 Data sheet eries 10 ize 125 Nominal pressure 250 bar
Mechanically Jointed Rodless Cylinder High Precision Guide Type. How to Order 16 G 300 L M9N. Stroke. Refer to Standard Stroke table.
Mechanically Jointed Rodless ylinder igh Precision uide Type eries MY/T ø, ø, ø T MY uide type igh precision guide with single axis igh precision guide with double axis ymbol Nil TN TF Type M thread Rc
2-Circuit Axial Piston Fixed Pump A18FDO
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics ervice 2-Circuit Axial Piston Fixed Pump A18FDO E 91540/03.10 1/12 eplaces: 06.09 Data sheet eries 10 ize 63,
Table of Contents Introduction... 2 Amphenol MIL-DTL-5015 and MIL-5015 Type Standard Cylindrical Connectors General Information, Class
able of ontents age Introduction...................................... 2 mphenol I--5015 and I-5015 ype tandard ylindrical onnectors eneral Information, lass esignations............................. 3
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM-- -
Review Plastics and Rubber Machinery
Review Plastics and Rubber Machinery Linz, 14./15th June 2018 VDMA Annual Review, Plastics and Rubber Machinery 2017 Review 2015 2016 2017» New Orders: 10 6 18 (Change in %) Domestic Market: -5 7 14 Export
280 Series Stainless Steel Rotary Direction Control Valve For hydraulics in a harsh environment.
280 Series Stainless Steel Rotary Direction ontrol Valve For hydraulics in a harsh environment. he 280 Series is a high pressure, 316 stainless steel, hydraulic rotary direction control valve. It is the
Single-circuit power brake valve LT 05
Single-circuit power brake valve L 05 RE 66 Edition: 09.0 Replaces: 08.00 Series X Service brake pressure 0, 60, 80, 00 and 5 bar HD 679 Features Small installation dimensions Integrated maximum pressure
Slide Bearings Type E For Shaft Diameter Range mm Main Application Field Electric Machines
Slide Bearings Type E For Shaft Diameter Range 160-315 mm Main Application Field Electric Machines End flange mounted slide bearing type EFWF with water-cooling and lubrication by a fixed oil ring RENK
VNA Application example. 3-port dual pressure, N.C. type SGH. Nozzle SGH. Coolant pump
igh Pressure oolant Valve eries Pa/ orresponding to high speed grinding and long drilling processes oolant valve for high pressure coolant liquid (up to Pa/) that is ideal for lubrication, dust blowing
Thick Film Chip Resistors
Thick Film Chip Resistors Features: Small size and light weight. Suitable for both flow and reflow soldering. Reduction of assembly costs and matching with placement machines. Performance Specifications:
Clamps Heavy-Series. Quality and Service worldwide
Clamps eavy-eries Quality and ervice worldwide Distributor Walter tauffenberg mb & Co. K P.O.Box 1745 D-58777 Werdohl Im Ehrenfeld 4 D-58791 Werdohl Tel. : + 49 (0) 2392 916-0 Fax: + 49 (0) 2392 2505 e-mail:
IMPORT/EXPORT MILITARY WEAPONS AND EQUIPMENT IN YEAR 2010 FOR PUBLIC
IMPORT/EXPORT MILITARY WEAPONS AND EQUIPMENT IN YEAR 2010 FOR PUBLIC Slovenian import of military weapons and equipment in year 2010 Military list ML1 Smooth-bore weapons with a calibre of less than 20
Dynamic Feed. Melt Pressure Control inside Hot Runners. T Technology. A Application. Dynamic Feed
Melt Pressure Control inside Hot Runners C T P A C Company P Products T Technology A Application Online melt pressure control inside hot runner systems C T P A Product type Components to be added to hot
CJ2. Cushion. Rubber bumper (Standard) Air cushion (except ø6) Cylinder stroke (mm) Built-in magnet Nil. Action. Double acting Single rod +1.
eries -/- / CJ2 ir cylinder / ø, ø, ø ow to Order Clean eries Vacuum suction type Cushion Rubber bumper (tandard) ir cushion (except ø) - C D J 2 L - R 7B 21 - C D J 2 L - R 7B Copper, fluorine and silicon-
PRODUCT INFORMATION FLOWSIC600-XT THE PERFECT MATCH. Gas flow meters
U W600-X Gas flow meters W600-X: ust how can the market leader for reliable, maximum precision ultrasonic gas flow measuring devices get any better? he answer is easy: by carefully listening to and consistently
Heavy Duty Cylindrical MIL-C QWLD
20 eavy uty ylindrical I--22992 QW mphenol eavy uty ylindrical onnectors I--22992, QW wall mount receptacle cable connecting plug box mount receptacle jam nut receptacle (wall mount) thru bulkhead receptacle
40/10 Automatic horizontal sliding landing door
Automatic horizontal sliding landing door Residential ow Commercial ow ervice lifts DOC-FECMCBP40R00EN PRINTABE VERION: 27-04-201 ENG www.fermator.com Door configuration IFT APPICATION Door cycles per
NEW!! ZU4 Series, Electric Pumps. Designed To Last! INDUSTRIAL TOOLS
ZU Series, Electric umps NEW!! INDUSRIL OOLS Designed o Last! Enerpac introduces the latest innovation in hydraulic pumps. hese new pumps surpass the features and benefits of conventional electric pump
DFE. solenoid control monoblock valve. Content. Working conditions Hydraulic circuit DFE052. Dimensional data Ordering codes...
DFE Content Working conditions... 54 Hydraulic circuit... 55 DFE52 DFE1 DFE2 Dimensional data... 6 Ordering codes... 64 Positioner kits... 67 Solenoid parts... 68 Dimensional data... 69 Ordering codes...
3 million cycles. High Pressure Coolant Valve. SGH Series W (24 VDC) (With light/surge voltage suppressor: 0.58 W)
igh Pressure oolant Valve eries Pa/ orresponding to high speed grinding and long drilling processes oolant valve for high pressure coolant liquid (up to Pa/) that is ideal for lubrication, dust blowing
Compact Valve Block. Overview of contents. Features. RE / /16 Replaces: Type M8
Industrial Hydraulics Electric Drives and ontrols inear Motion and ssembly echnologies Pneumatics Service utomation Mobile Hydraulics ompact Valve lock RE 4 94/0.03 / Replaces: 0.94 ype M8 Nominal size...3
RS Double Strand Compatible / LAMBDA Roller / RS160-LMD-1
AMBDA hain RS Double Strand ompatible / AMBDA Roller / RS160-MD-1 ube-free chain RS Double Strand ompatible AMBDA Roller RS160 -MD -1 RS Double Strand ompatible AMBDA aking your roller chain operations
CJ1. Air Cylinder. Double Acting: ø4/single Acting, Spring Return: ø2.5, ø4 CJ1B 4 5 U4. How to Order/Double Acting
1 Air Cylinder Double Acting: ø/ingle Acting, pring Return: ø., ø eries Variations tandard eries Double acting ingle acting style B pring return B U mm For single acting type, refer to pages 6-- to.. How
Traction module (Flow divider) RTM
Traction module (Flow divider) RTM RE 64592 Edition: 08.2016 Replaces: 05.2015 eries 1 izes 16 and 25 Nominal pressure 500 bar Maximum flow 160 l/min (size 16) 440 l/min (size 25) HD7373 Features rotects
High Flow Cartridge Valves 2/2 Way Series NG16 NG100
High Flow Cartridge Valves 2/2 Way Series NG16 NG100 Table of Contents Designation Symbol Page General Description and Operating Principle 3 Sectional View and Types of Cones and Sleeves 4 Specifications
INGUN High Current Test Probes
Test Probes Test Fixtures INGUN High Current Test Probes High current rating Low internal resistance Catalogue 1.2 INGUN High Current Test Probes Power for your industry INGUN high current test probes
SBS-Control. Table of contents. Operating Instructions BKS24-9A. Operating Instructions
Operating Instructions BKS24-9A Operating Instructions BKS24-9A Table of contents Operating Instructions 1 Operating controls and indicators 2 2 Preparations for faultless commissioning and operating 3
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled. Needle shut-off
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Needle shut-off Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated
Machine shut-off nozzle for Elastomer; Type-E Integrated actuator and tempering system
Machine shut-off nozzle for Elastomer; Type-E Integrated actuator and tempering system Application: Elastomeric plastics Shut-off technique: Integrated two way pneumatic actuator Characteristics: Integrated
Cartridge Heaters. Application Field. Application examples
artridge Heaters pplication examples Injection moulding - Internal heating of zzles Hot runner systems - Heating of manifolds Packaging industry - Heating of welding bars Packaging industry - Heating of
DIE STORAGE GAS SPRING
DIE STORGE GS SPRING Worldwide NITROGS is a global company that has a worldwide presence through its own network of subsidiaries and extensive distributor network. NITROGS SPRINGS GMBH Frankfurt, Germany
LUDV control block of sandwich plate design
LUDV control block of sandwich plate design RE 64125/02.11 Replaces: 01.10 1/22 ype SX 14, SX 14 S Nominal size 14 Series 2X Maximum pressure, pump side 250 bar Maximum pressure, actuator side 300 bar
Axial Piston Variable Pump A17VO
Electric Drives and Controls Hydraulics Linear Motion and ssembly echnologies Pneumatics ervice xial Piston Variable Pump 17VO E 92260/03.10 1/16 eplaces: E 92250 Data sheet eries 10 ize 55 to 107 Nominal
Innovative Power Transmission. Slide Bearings Type E. Series EG Journal Range mm
Innovative Power Transmission Slide Bearings Type E Series EG Journal Range 475-1250 mm RENK Slide Bearings Type E ➀ Type E ➁ Housing G smooth, foot-mounted ➂ Heat dissipation N Z X 5) W 5) U T natural
YLCS Water-cooled or remote air-cooled screw compressor chiller Heat pump application
YS ater-cooled or remote air-cooled screw compressor chiller eat pump application ooling capacities from 342 k to 10 k vailable configurations that meet lass energy efficiency levels at urovent Standard
I-Wrench for Production
I-Wrench for Production mart and Flexible. LiveWire I-Wrench Wireless. Flexible. User-Friendly. Your productivity, your freedom. ur leco LiveWire I-Wrench is a true all around production tool to meet your
MOTOMAN SDA-series. Flexible Applications with the SDA-series. 15 axes Flexible applications Compact design allows. maximum performance SDA10D SDA10F
Flexible pplications with the D-series he D-series are slim an agile 1-axis dual-arm robots providing human-like flexibility of movement and fast acceleration. hey distinguish themselves through slim and
EManually Operated Directional Valves
DIRECIONL CONROLS hese valves may be used to manually shift the spool position and change the direction of oil flow. hreaded Connections Sub-late Mounting Specifications DM--C - DM--D - DM--D - DM--B -
Ammeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 Datasheet: uni QN EN Plastic Modular elt Series
ALLROUNDER 520 A multi-component
Facts and figures ALLROUNDER 52 A multi-component Distance between tie bars: 52 x 52 mm Clamping force: 15 kn Injection unit: 29, 4, 8 horizontal 7, 17, 29 vertical www.arburg.com 52 A multi-component
Industrial Distribution Group. Keysert and Keensert. Commercial-Grade and Mil-Spec Solid Threaded Inserts, Tooling, & Kits
Industrial Distribution Group and Keensert CommercialGrade and MilSpec Solid ed Inserts, ing, & Kits Contents KEYSERT ND Keensert and Removal... 3 Thin and Heavywall s... 4 Carbon and Stainless Steel Bulk
MOTOMAN SIA-series. Flexible Applications with the SIA-series. 7 axes Flexible applications Compact design allows maximum performance SIA20D SIA20F
Flexible pplications with the I-series he I-series are small and agile -axis robots providing human-like flexibility of movement and fast acceleration. hey distinguish themselves through slim and lightweight
ALLROUNDER 720 S Multi-component
Facts and figures ALLROUNDER 72 S Multi-component Distance between tie bars: 72 x 72 mm Clamping force: 32 kn Injection unit: 13, 21, 32 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 72 S Multi-component
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator
Slide Bearings For Industrial, Marine And Offshore Installations
Slide Bearings For Industrial, Marine And Offshore Installations The advantages of working with RENK Hannover are many; here are a few of particular interest: RENK can boast a depth of experience in bearings
hotrod Cartridge Heaters
hotrod Cartridge Heaters hotrod Cartridge Heaters Components We provide our customers with an extensive portfolio of ments, thermal sensors and control technology. Since 1973, we have manufactured heating
Safety, an essential quality
CB ll fluids Safety, an essential quality liminate leaks, to ensure the integrity of fluids and to keep the workplace clean. Our flat face technology ensures continuity of sealing during connection and
RPL Temperature Control
RPL Temperature ontrol Ensure safety and guarantee... Hot and cold water circuits Temperature control of moulds on injection presses Easy circuit identification Thanks to the identification of sockets
Axial piston fixed pump A17FO Series 10
Axial piston fixed pump A17FO eries 10 E 91520 Issue: 11.2015 eplaces: 10.2014 High-pressure pump for use in commercial vehicles izes 23 to 107 Nominal pressure/maximum pressure 350/400 bar Bent-axis design
ALLROUNDER 820 S Multi-component
Facts and figures ALLROUNDER 82 S Multi-component Distance between tie bars: 82 x 82 mm Clamping force: 4 kn Injection unit: 21, 32, 46 horizontal 7, 1, 17, 29, 4 vertical www.arburg.com 82 S Multi-component
KR15. LM Guide Miniature Actuator. KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body. CATALOG No.
LM Guide Miniature Actuator KR1 KR Series Actuators with Integrated LM Guide and Ball Screw in a Compact Stainless Steel Body US, EPC Patent pending CATALOG No.76E LM Guide Actuator KR1 Miniature LM Guide
8.15 Service of the Actuator VP4008P Series
Service of the ctuator V4008 Series 8.15 Service of the ctuator V4008 Series 8.15.1 echnical Data V400801, V40080301 Doc003511.png o ensure long life and continued flawless operation of the actuator, we
Offset Link L2 L1. SK1 Attachment
tandard ouble itch hain ouble itch tandard ouble itch hain has the same basic construction as standard roller chain, but chain pitch is twice as long, and the chain has flat-shaped link plates. his series
Open center control block in mono block design MO-16, 22, 32
Open center control block in mono block design MO-,, 3 RE 35 Edition: 0.0 Replaces: 0.003 Sizes,, 3 Series X Maximum working pressure on the pump side 350 bar on the consumer side 0 bar Maximum flow MO-:
No.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
Technical Data Sheet PS , Rev C May Micro Motion R-Series Coriolis Flow and Density Meters
Technical Data Sheet PS-001945, Rev C May 2017 Micro Motion R-Series Coriolis Flow and Density Meters R-Series Coriolis Flow Meters May 2017 Detailed Specifications R-Series accuracy Model Liquid mass
ALLROUNDER 470 S Multi-component
Facts and figures ALLROUNDER 47 S Multi-component Distance between tie bars: 47 x 47 mm Clamping force: 11 kn Injection unit: 17, 29, 4 horizontal 3, 7, 1, 17, 29 vertical www.arburg.com Machine dimensions
Motorized Rotary Actuator Type 3001
Motorized Rotary ctuator Type 00 dvantages/benefits 5 m nominal torque Open/closed with choice of rotation speeds Flange interface ISO 5 IP 65 rating orrosion resistant vailable with manual override Optical
NI PS-15/16/17 Side Mount Brackets
INSTALLATION GUIDE NI PS-15/16/17 Side Mount Brackets This document provides the installation procedure for the NI PS-15/16/17 Side Mount Brackets. This accessory is used to mount NI PS-15/16/17 power
Position Switches Series 8060/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50047 > Degree of protection IP66 / IP67 > Extensive assortment of
Directional Control Valves
Frequently sked Questions N-1 Frequently sked Questions What is the function of a directional control valve? directional control valve is the extend and retract control for your hydraulic cylinders. It
COMPACT Automatic horizontal sliding landing door
Automatic horizontal sliding landing door Residential DOC-FECMCBPCOR00EN ONGOING VERSION: 08-06-2015 ENG www.fermator.com Door configuration LIFT APPLICATION Door cycles per year: Up to 350.000. Traffic
V50... V53 Series 3/2, 5/2 and 5/3 way valves Solenoid actuated and pilot operated 1/8... 1/2
50... 5 eries /2, 5/2 and 5/ way valves olenoid actuated and pilot operated /8... /2 igh flow in-line valves ompact and robust design ow power energy efficient solenoids lexible in-line and manifold mounting