Cartridge Heaters. Application Field. Application examples
|
|
- Madlyn Hardy
- 6 years ago
- Views:
Transcription
1 artridge Heaters pplication examples Injection moulding - Internal heating of zzles Hot runner systems - Heating of manifolds Packaging industry - Heating of welding bars Packaging industry - Heating of hot stamps Textile Industry - Heating of cutting knives Paper Industry - Heating of stamping rolls Laboratories - Heating of analytical equipment For Heating application with: Packaging machines Extruders asting Machines Hot glue utting knives nalytical equipment in laboratories ustomization options for example: Power distribution Numerous attachments and protection sleeves Various moisture protection options Special Features: Stainless steel with the highest level of mixed properties for heat conductivity, corrosion resistance, thermal expansion Standard diameter tolerance to fit H7 The best diameter tolerances in the industry: up to mm possible Various VDE certificates available UL certified Protection class IP67 possible for a number of dimensions Technical Data: Sheath material...stainless steel Heating conductor material...nir 8020 Max. sheath temperature / 1380 F Max. voltage V Wattage tolerance*... ± 10 % High voltage resistance*.1500 V at > 24 V operation voltage V at 24 V operation voltage Insulation resistance*... 5 MΩ at 500 V D Leakage current* m at 253 V Length tolerance... ± 1.5%, min ± 1 mm Standard diameter tolerance...metric: / mm...inch:± 0.79 mils [± 0.02 mm] *tested at environmental temperature pplication Field plastic injection mold internal heating of zzles hot runner systems heating of manifolds packaging industry heating of sealing bars packaging industry heating of hot stamps textile industry heating of cutting knives paper industry heating of embossing rollers laboratories heating of analytical equipment, for example, mass spectrometer VR No.: /S reg. No.: September 2016
2 Performance Range options Type tolerance max L [mm/inch] max W/cm 2 max Temp [ / F] max U [V] thermocouple attachments power distribution moisture protection mm 350 / / ± 0.1 mm 3000 / IP HHP /4 750/ /8 ja IP 67 1/2 5/8 ± 0.1 mm 3000 / ± 0.1 mm 3000 / ± 0.1 mm 3000 / 118 LHT 10 ± 0.1 mm 3000 / ± 0.1 mm 3000 / ± 0.1 mm 3000 / ± 0.1 mm 3000 / 118 LHT bendable 6.5 ± 0.2 mm 3000 / 118 LHT bendable 8 ± 0.2 mm 3000 / / 1292 *If the surface load exceeds 20 W/cm 2 then an interference fit is required Formula for calculating the surface load (W/cm 2 ) W/cm 2 = Wattage x 1.1 ircumference x heated length [cm] VR No.: /S reg. No.:
3 For lower surface loads with a max. of 10 W/cm 2 ost effective heating with a longer lifespan Specifications Diameter 6.5 / 8.0 / 10.0 / 12.5 / 16.0 / 20.0 Max. sheath temperature 750 / 1380 F Max. sheath surface load 10 W/cm 2 Max. length 3000 mm / 118 inch Length tolerance ± 1.5 %, min. ± 1.5 mm / inch No high voltage resistance and insulation resistance in case of current return via the cartridge sheath (only extra low voltage). Low Power artridge Heaters Type LHT Options Moisture protection Selectable connection options In case of extra low voltage, current return via the cartridge sheath is possible onnection leads attached to both ends of the cartridge possible U b U a U =Length of unheated Zone Low Power artridge Heaters Type LHT bendable Specifications Diameter 6.5 or 8.0 Sheath material nickel tube Max. sheath temperature 700 / 1292 F Max. sheath surface load 10 W/cm 2 Max. length 3000 mm / 118 inch Length tolerance ± 1.5 %, min. ± 1.5 mm / inch Diameter tolerance ± 0.2 mm / inch onnection glass silk insulated Ni-leads mounted externally Min. bending radius 15 mm / 0.59 inch (internal) No high voltage resistance and insulation resistance in the case of return path via the cartridge sheath (only extra low voltage). Options Moisture protection Selectable connection options VR No.: /S reg. No.:
4 Low Power artridge Heaters Type LHT Knife artridge utting knife for textiles and foils Specifications Diameter 5.0 mm / inch Sheath material Incoloy Max. sheath temperature 950 / 1742 F Max. sheath surface load 15 W/cm 2 Diameter tolerance ± 0.1 mm / inch Max. connection voltage 24 V, with return path via sheath onnection options connection pin utting knife wear-resistant hard metal alloy, pre-formed, unsharpened Min. bending radius 12.5 mm / inch (internal) Options Delivered straight or bent M b L2 R min. 12,5 L1 32,5 a min. 15 M = utting knife a, b, L1, L2 = variable length ll dimensions in mm VR No.: /S reg. No.:
5 Member of the NIE Group onnection Types with leads mounted externally Type 2 ceramic head any leads see "onnection leads" Type 3a ring sleeve, silicone leads,sealed with silicone, moisture protected max. 180 / 356 F UL rated: max 150 /302 F Type 3 (for all ) tube section 40mm instead of ring sleeve, e.g. with large lead cross sections (25mm tube section on request) onnection with leads mounted internally Type 4 any leads, sealed with ceramic, see "onnection leads" Type 5a PTFE disc, PTFE leads, moisture protected, max. 260 / 500 F UL rated: max 150 /302 F Type 3b ring sleeve, PTFE leads, sealed with epoxy resin, moisture protected max. 250 / 482 F UL rated: max 130 /266 F Type 3c ring sleeve, GLS leads, ceramic socking, max. 320 / 608 F Type 6 Multi core silicone cable with tube section 40mm, sealed with silicone, moisture protected. Max. 180 /356 F, UL rated max. 150 /302 F Type 5b PTFE disc, siliconized internal structure, IP67 up to 40W/ cm2, max. 350 /662 F at sheath, 260 /500 F at leads, UL rated: max 180 /355 F Type 5c Silicone disc, silicone leads, max. 180 /356 F at sheath, UL rated: max 150 /355 F onnection Leads Glass silk insulated Ni-leads Silicone Ni-leads PTFE insulated Ni-leads (multistranded) High temperature resistant glass silk insulated Ni- leads are, beaded leads (breakage risk) max. Temp: 320 / 608 F max. Temp: 180 / 356 F max. Temp: 260 / 500 F max. Temp: 600 / 1112 F max. Temp: 600 / 1112 F UL rated: max 150 /302 F UL rated: max 180 /356 F Sleeves Standard 8mm (Samples) (Samples) Flexible metal: Standard 6.5mm Stainless steel: Option 10mm, 3/8 inch Option 10mm 3/8 inch Flexible metal: Standard 6.5mm Special 6.5mm GLS sleeving, max. 320 /608 F, UL on request raided metal sleeving Flexible metal sleeving Stainless steel sleeving, moisture proof VR No.: /S reg. No.: Stainless steel: Option 10mm, 3/8 inch
6 ttachment Parts ngular block hotrod / / / / / / ent pipe hotrod / / / / / Right angle exit hotrod / / / / Flange and Threaded Nipple ttachments* D D Threaded nipple hotrod Gew M10 x M12 x M14 x M16 x M20 x M26 x 1.5 1/ G 1/8 3/ G 1/4 1/ G 3/8 5/ G 1/2 Threaded nipple with removal aid hotrod D Gew M10 x M12 x M14 x M16 x M20 x M26 x 1.5 1/ G 1/8 3/ G 1/4 1/ G 3/8 5/ G 1/2 Flange hotrod D / / / / Mounting lamp hotrod D Materialstärke: 1.5 mm D *Remarks ll attachments are mounted at the unheated zone of the heater No immersion of any attachements Please state immersion depth with order VR No.: /S reg. No.:
hotrod Cartridge Heaters Application Fields
For heating applications: - Packaging machines - Extruders - Casting machines - Hot melt - Cutting knives - Analytical equipment in laboratories Custom options: - Power distribution - Numerous attachments
More informationhotrod Cartridge Heaters
hotrod Cartridge Heaters hotrod Cartridge Heaters Components We provide our customers with an extensive portfolio of ments, thermal sensors and control technology. Since 1973, we have manufactured heating
More informationCoil heaters HOTSPRING
... Infinite solutions... Coil heaters HOTSPRING MODEL Z.51 - hotspring ... Infinite solution... Index 3 4 5 5 6 7 hotspring coil heaters (WRP) Application examples Possibilities of cooling Exits hotspring
More informationHotset High-Watt Density Cartridge Heaters
Cartridge Heaters hotset High-Watt Density Cartridge Heaters Hotset High-Watt Density Cartridge Heaters proven technology founded on our long term experience with many outstanding advantages. For applications
More informationCartridge Heaters W A T L O W FIREROD. Cartridge Heaters
W A T L O W The Watlow revolutionized the heating element industry in 94 when it was patented as the first swaged cartridge heater. With premium materials and tight manufacturing controls, the heater continues
More informationNozzle band heaters MODEL Z.11 (BRASS) MODEL Z.15 (STEEL) MODEL Z.17 (STEEL/PLUS) MODEL Z.19 (STEEL) MODEL Z.20 (CERAMIC) MODEL Z.
... Infinite solutions... Nozzle band heaters MODEL Z.11 (BRASS) MODEL Z.15 (STEEL) MODEL Z.17 (STEEL/PLUS) MODEL Z.19 (STEEL) MODEL Z.20 (CERAMIC) MODEL Z.122 (MAXI) Index 2 4 6 9 11 13 15 19 Model Z.11
More informationFlexible Heaters. Silicone Rubber Heaters
Rugged, yet thin, lightweight and flexible the use of Watlow silicone rubber heaters is limited only by the imagination. With these heaters, heat can be put where it is needed. In the application process
More informationCartridge Heaters. Standard Terminations
Standard Terminations Innovative Cartridge Heater Terminations Focused on Providing Maximum Performance Under a Diverse Segment of Demanding pplications We offer a selection of over 40 standard terminations
More informationMineral Insulated Resistance Thermometers (RTD)
Mineral Insulated Resistance Thermometers (RTD) Electronic Temperature Measurement Data sheet : MIRTD/2012 Contents Page RTD Element Type 2 Conductors & Number of Wires 2 Probe Diameter 3 Length Types
More informationThermocouples W A T L O W
W A T L O W Over 90 years of manufacturing, research and design makes Watlow a world class supplier of temperature measurement products. We have designed and manufactured millions of thermocouples for
More informationShort Form Catalogue AJ Thermosensors
Thermocouples Short Form Catalogue AJ Thermosensors Resistance thermometers Head mounted Probe style Application specific Accessories See the individual datasheets for more detailed information on each
More informationThermocouples. General Applications Tube and Wire. Thermal Devices, Inc. Mount Airy, Maryland USA
Watlow is a world class supplier of temperature measurement products, with more than 90 years of manufacturing, research and design expertise. Companies engaged in critical process control of food and
More informationThermocouples. General Applications Tube and Wire. Performance Capabilities. Features and Benefits. Typical Applications. Construction and Tolerances
Watlow is a world class supplier of temperature measurement products, with more than 90 years of manufacturing, research and design expertise. Companies engaged in critical process control of food and
More informationCX1 ProVector Explosion-Proof Heaters
Explosion-Proof Heaters For hazardous locations heating, rely on the for the most dependable, troublefree service available. CCI Thermal Technologies Inc. manufactures explosion-proof air heaters to satisfy
More informationHot runner thermocouple Model TC46
Electrical temperature measurement Hot runner thermocouple Model TC46 WIKA data sheet TE 65.46 for further approvals see page 7 Applications Plastics and rubber industry Hot runner bushings, drops and
More informationASSEMBLY GUIDE. D-M-E Tubular Manifold & Components System
ASSEMBLY GUIDE D-M-E Tubular Manifold & Components System Customer Reference Information To our customers: D-M-E created this manual to assist you in the installation of our Tubular Manifold and Components
More informationNatural Gas Truckee Tahoe Airport Road Truckee CA
Natural Gas Markets: Midstream (Transmission to processing) Chemical Processing Power Generation Refineries Utilities Applications: Transportation (Natural Gas Vehicles) Moisture Analysis Fertilizer Production
More informationCable thermocouple Model TC40
Electrical temperature measurement Cable thermocouple Model TC40 WIKA data sheet TE 65.40 Applications For direct installation into the process Machine building Motors Bearings Pipelines and vessels Special
More informationCartridge Heaters CARTRIDGE
Hotwatt manufactures a wide range of cartridge heating units for a variety of applications. This size, sheath, leads, terminals, wattage and voltage can be adapted to your heating requirements. Hotwatt
More informationBand Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater
Band Heaters Maxiband Heaters Maxiband The Most Sought After Band Heater A B C D E F General purpose terminal box offers excellent protection to the exposed terminals. To simplify electrical wiring, the
More informationTHIS MATERIAL IS MEANT TO BE USED ALONG WITH OUR CATALOG IT IS NOT A SUBSTITUTE FOR THE CATALOG
THIS MATERIAL IS MEANT TO BE USED ALONG WITH OUR CATALOG IT IS NOT A SUBSTITUTE FOR THE CATALOG COMPANY OVERVIEW Since 1970, we have been pioneering new developments in heater technology and providing
More informationSurface thermocouple Model TC50
Temperature Surface thermocouple Model TC50 WIKA data sheet TE 65.50 for further approvals see page 2 Applications To measure surface temperatures on flat surfaces or pipes, in both laboratory and industrial
More informationDirect-acting 2/2-way plunger valve
Direct-acting 2/2-way plunger valve Type can be combined with Direct-acting and compact valve up to diameter of DN 6.0 Vibration-proof, bolted coil system Increased leak-tightness with welded plunger guiding
More informationCeramic Heater Bands
Typical applications are plastic molding and extrusion. Ceramic heater bands are also used for pipe heating, heat treating, and autoclaves or any application where there is a need to apply heat to a cylindrical
More informationPlastics Machinery Thermocouples - Type 4, 7, 10, 11 & 19
Plastics Machinery Thermocouples - Type 4, 7, 10, 11 & 19 A wide variety of thermocouples commonly used in the plastics industry, suitable for high and low temperatures applications. Available in a choice
More informationAdjustable Bayonet Thermocouple
Adjustable Bayonet Thermocouple 3 16 Diameter is standard 1 2 Probe Length is standard Lead Length Termination Easily obtaining a desired probe depth, the adjustable bayonet sensor uses a tension spring
More informationTFE 510 Core Thermometer with fast response time
84 Temperature Thermometers TFE 510 Core Thermometer with fast response time Measurement range -50 C... 300 C (-58 F... 572 F) Accuracy ±0.5 C (0.9 F) Resolution 0.1 C (0.2 F) Measurement probe Thermocouple,
More informationHot Runner Thermocouples Model TC46
Electrical Temperature Measurement Hot Runner Thermocouples Model TC46 WIKA Data Sheet TE 65.46 Applications Plastics and rubber industry Hot Runner bushings, drops and nozzles Hot Runner manifolds Moulds
More informationD2VW. Sealed Miniature Basic Switch Conforms to IP67 (Excluding the terminals on terminal models) Model Number Legend. Sealed Miniature Basic Switch
Sealed Miniature Basic Switch Conforms to IP67 (Excluding the terminals on terminal models) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
More informationSL (AZ3) Micro Limit Switches
SUBMINIATURE SIZE LIMIT SWITCHES SL (AZ3) Micro Limit Switches Quickly upgraded to limit switches with lamps by mounting an LED lamp socket. Rubber cover type (roller ) Compliance with RoHS Directive FEATURES
More informationCabinet Ovens. Cabinet Ovens
Cabinet Ovens Cabinet Ovens Gruenberg designs and manufactures a complete line of standard and custom industrial cabinet ovens to accommodate a variety of thermal processing applications up to 1200 F,
More informationCabinet Ovens. Gruenberg Industrial Oven Features
Cabinet Ovens Cabinet Ovens Gruenberg designs and manufactures a complete line of standard and custom industrial cabinet ovens to accommodate a variety of thermal processing applications up to 1200 F,
More informationStrip Heaters W A T L O W. 375 Finned Strip. Strip Heaters
W A T L O W Like its 375 strip counterpart, the 375 finned strip heater is constructed of highly-compacted MgO-based insulation, which conducts heat efficiently from the nickel-chrome element wire to the
More informationNexus Pre-Wired Hot Runner System
Nexus Pre-Wired Hot Runner System www.mastip.com Overview Assembly Overview L Key Features Fast and simple installation out of the box Incorporates advanced heating technology for superior thermal performance
More informationD2SW-P. Sealed Subminiature Basic Switch. Ordering Information D2SW-P
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
More informationMineral-Insulated RTD Temperature Probe According to DIN EN 60751
ata Sheet 902210 Page 1/12 Mineral-Insulated RT Temperature Probe According to IN EN 60751 For temperatures from -50 (-200) to +600 C Flexible sheath cable with vibration-resistant measuring insert As
More informationMetal-Protected Measuring Inserts
Product Information 176 Metal-Protected Measuring Inserts Thermocouples and Resistance Thermometers DIN 43 735 The following table shows in comparison the different types of measuring inserts. They are
More informationSmall Limit Switch D4V
Small Limit Switch DV Compact Vertical Models Sized for Asian Standards Compact new design approximately / the size of OMRON vertical Limit Switches. Structure enables the terminal section to be fully
More information8.15 Service of the Actuator VP4008P Series
Service of the ctuator V4008 Series 8.15 Service of the ctuator V4008 Series 8.15.1 echnical Data V400801, V40080301 Doc003511.png o ensure long life and continued flawless operation of the actuator, we
More informationType LT Self-Regulating Heater Cable For use in Ordinary (Unclassified) and Hazardous (Classified) Locations
F, G ;, Class I, Class Groups F, G; Operating Principle The parallel bus wires apply voltage along the entire length of the heater cable. The conductive core provides an infinite number of parallel conductive
More information8.16 Service of the Actuator VP8016P Series
Service of the ctuator V8016 Series 8.16 Service of the ctuator V8016 Series 8.16.1 echnical Data V80160501, V80160601, V80160801 Doc003489.png o ensure long life and continued flawless operation of the
More informationThis is trial version
Z-Standards Contents (Alphabetical order, terms partly according to DIN 16750) A All dimensions shown in this catalogue are specified in mm, given tolerances refer to an ambient temperature of 20 C Prod.-No.
More informationModular Instrumentation System
www.swagelok.com Modular nstrumentation System Kenmac Series Modular 85 System Provides a standard modular instrumentation interface and mounting system: 2- and 4- valve pressure and differential pressure
More informationImperial: 230Vac. Part No SC: Standard, Low to Medium Watt Density, HS: Superwatt, High Watt Density
Cartridge Heaters Imperial: Vac Part No Hawco can offer a wide range of cylindrical stainless steel sheathed cartridge heaters for use up to 680 C, to provide localised heat to restricted work areas requiring
More informationÖLFLEX CLASSIC 135 CH -halogen-free control cable, HFFR, flexible and screened for various applications, U 0 /U: 300/500V
PRODUCT INFORMATION Screened halogen-free control cable with improved fire characteristics -halogen-free control cable, HFFR, flexible and screened for various applications, U 0 /U: 300/500V Info CPR:
More informationLBD-Series. Radiator-Cooled Load Bank. Description
Radiator-Cooled Load Bank Description Simplex LBD Load Banks are a special form of stationary, resistive, forced air-cooled load bank which utilizes the air outflow of an engine radiator for cooling of
More informationARROW UNITED INDUSTRIES
IP-3R ARROW UNITED INDUSTRIES Building Tomorrow s Ventilation Today Heavy Duty Dampers Industrial, Power Plant & Commercial Applications ARROW UNITED INDUSTRIES has specialized in the design and manufacturing
More information10.7 Single Valve Gate Nozzle GAN...S01
Single Valve Gate Nozzle GN...S01 10.7 Single Valve Gate Nozzle GN...S01 10.7.1 echnical Data - Single Valve Gate Nozzle GN...S01 Doc003429.png Single Valve Gate Nozzle Valve pin operation Operation medium
More informationType HLT Self-Regulating Heater Cable For use in Ordinary and Hazardous (Classified) Locations
E, I, E, Description Nelson s Type HLT self-regulating heater cable is a parallel circuit electric heater strip. A conductive fluoropolymer core material is extruded over the multi-stranded, nickel-plated,
More informationCast-In Heaters Large Thermo-Platens
Large Thermo-Platens Engineered Solutions With Advanced Technology in Cast-In Thermo-Platens Tempco specializes in innovative engineering and manufacturing of thermal components. Coupled with our diverse
More informationsmart hot runner solutions
Mould Design Recommendations for Hot Runner Applications smart hot runner solutions www.mastip.com Contents Mould Design Recommendations pg 3 4 5 6 6 6 8 9 11 12 13 Contents Introduction 1.0 Plate Requirements
More informationDIRECT IMMERSION RESISTANCE THERMOMETER CONFIGURATIONS
DIRECT IMMERSION RESISTANCE THERMOMETER CONFIGURATIONS WELDED THREADED CONNECTION II 1G/D Ex ia Pt100KI D20 D21 D26-1 D26-2 1 FEATURES The industrial thermometer configuration guarantees a short response
More informationThermocouples TE Measuring Insert. rigid Model TC 001 flexible Model TC 002. Electronic Temperature Measurement
TE 65.01 Thermocouples Measuring Insert Electronic Temperature Measurement rigid Model TC 001 flexible Model TC 002 Services intended Exchangeable measuring insert for all industrial and laboratory applications.
More informationC T EM P ERATU R E S ENS OR. we get to the point... Gräff GmbH Bonner Strasse 54 D Troisdorf Tel: +49(0) Fax: +49(0)
TEMPERATURE SENSORS C T EM P ERATU R E S ENS OR we get to the point... Gräff GmbH Bonner Strasse 54 D - 53842 Troisdorf Tel: +49(0)2241-4907-0 Fax: +49(0)2241-4907-77 INTERESTING FACTS Gräff GmbH Competence
More informationHL (AZH) LIMIT SWITCHES
COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount
More informationENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head
ENGLISH Datasheet Platinum Resistance Pt100 4 wire class B Resistance Thermometer with Compact KNS Head Pt100 probe with compact KNS terminal head Class B, 4 wire connection Various probe available lengths
More informationYUDO SINGLE VALVE NOZZLE SERIES III V E R. N O M N S V E N O
SINGLE VALVE III Instruction Manual YUDO SINGLE VALVE NOZZLE SERIES III V E R. N O. 0 2 0 9 M N S V E N O Greetings Thank you for using YUDO Single Valve III System. YUDO fabricated Single Valve III System
More informationHeated hoses Analytic hoses. innovations in heat tracing
Heated hoses Analytic hoses innovations in heat tracing eltherm GmbH eltherm GmbH is an international operating company specializing in the field of electrical heat tracing systems. With more than 40 years
More informationD2HW. Sealed Ultra Subminiature Basic Switch. Ordering Information
Sealed Ultra Subminiature Basic Switch Smallest sealed snap-action switch in the industry with a very long stroke for reliable ON/OFF action. The case dimensions are 78% of conventional models, contributing
More informationAuto-Couplings. For Multiple Connection Systems. Auto-Couplings
Auto-Couplings For Multiple Connection Systems Auto-Couplings 2 Auto-Couplings For Multiple Connection Systems Minimized Down-Time The automation process going on in most industries requires more sophisticated
More informationCable thermocouple Model TC40
Electrical temperature measurement Cable thermocouple Model TC40 WIKA data sheet TE 65.40 for further approvals see page 11 Applications For direct installation into the process Machine building Motors
More informationSPRING LOADED RESISTANCE THERMOMETER CONFIGURATIONS
SPRING LOADED RESISTANCE THERMOMETER CONFIGURATIONS FOR USE WITH THERMOWELLS II 1G/D Ex ia Pt100RI/WI S10 S11 S16-1 S16-2 1 FEATURES TECHNICAL SPECIFICATION ASSEMBLY The industrial spring loaded configuration
More informationSECTION 8: STATOR WINDING SENSORS
SECTION 8: STATOR WINDING SENSORS Install between stator windings for continuous protection of motors and generators Increased safety sensors for use in hazardous areas Single and dual elements offer high
More informationMGO Thermocouples. Controls. Connection Head. Connection Head. Thermowells. Junction Fittings. Connectors Connection Heads.
Connection Head Type J, K, T and E Grounded Ungrounded Exposed Sheath Materials 304 Stainless Steel 316 Stainless Steel Inconel 600 Standard Aluminum Aluminum Flip Top Cast Iron/Aluminum 316 Stainless
More informationSECTION 7: MINIATURE SENSORS
SECTION 7: MINIATURE SENSORS Embedment sensors install in bearings for over-temperature protection Small, rugged RTDs and thermocouples withstand rough handling and harsh environments Certified non-sparking
More informationHL (AZH) Limit Switches
COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Wide selections of actuators, terminals and bodies to meet any application Excellent environmental resistance Die casting caseiec IP67 Plastic caseiec
More informationCiMEC Technologies Pvt. Ltd., 23/H, Meldi Estate, Gota, Ahmedabad, Gujarat. Discipline Electrical Testing Issue Date
Last Amended on - Page 1 of 6 I. CABLES AND ACCESSORIES 1. PVC Insulated Cables Tests on Conductor: Annealing Test (copper) IS 10810 (Part 1):1984 (RA 2011) 0 to 50 % Tensile Test (Aluminium) IS 10810
More informationNOZZLE HEATER BANDS. Part No. Standard Metric Watts Volts Quantity Prices
Page 84 NOZZLE HEATER BANDS 12 STANDARD FLEXIBLE LEADS Available in 120 or 240 Volts Superior Mica Construction Flange Lock-Up Strain relief for ultimate lead protection In Stock IMMEDIATE SHIPMENT Part
More informationWA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
More informationTubeskin thermocouple assembly Model TC59-V
Electrical temperature measurement Tubeskin thermocouple assembly Model TC59-V WIKA data sheet TE 65.59 further approvals see page 7 V-PAD Applications Chemical industry Superheated steam applications
More informationSolenoid Valves HJE Series (2, 3, 5-port pilot type solenoid valves)
Solenoid Valves HJE Series (2, 3, 5-port pilot type solenoid valves) 80mm 12mm 18mm Space Saving Thin and compact size Valve width: 12mm [0.472in.] Valve length: 80mm [3.150in.] Flow Large flow rate with
More informationNUCLEAR VALVES. Design, Manufacturing, Assembly and Testing
NUCLEAR S Design, Manufacturing, Assembly and Testing DAHER S NUCLEAR MARKET Daher has been innovating in the nuclear valve sector for nearly 40 years. Its valves are present across the market: > Nuclear
More informationIndustrial, Heavy Insulated Mono-Tape. and Duo-Tape
Industrial, Heavy Insulated Mono-Tape and Duo-Tape Description: HTS/Amptek AWD and AWM Heating Tapes are Single and Double Duo-Tapes designed for use in high temperature applications. AWD and AWM Heating
More informationHYDROCON Standard Sealed Connectors
HYDROCON Standard Sealed Connectors Ratings: 2 & 3 Pole 10A 250V AC/DC 4 Pole 6A 250V AC/DC 6 & 7 Pole 3A 250V AC/DC 9 Pole 5A 150V AC/DC 25 Pole 1A 50V AC/DC Contact Resistance:
More informationAccuTru Thermowells. Dedicated to those organizations that value improved temperature measurement for critical processes
S E N S O R T E C H N O L O G I E S AccuTru Thermowells Dedicated to those organizations that value improved temperature measurement for critical processes Section 5 Index Thermowells Model Page PT-1
More informationModulating Water Valves and Bulb Wells
Modulating Water Valves and ulb Wells PPLITION: These modulating valves regulate the flow of water to the heat exchanger to maintain a desired exiting oil temperature. They open automatically when temperature
More informationElaborado: Revisado: Aprobado: Nombre: AR Nombre: Nombre: Firma: Firma: Firma:
Page 1 de 22 Index: 1.- Advance 2.- Objective 3.- Nozzles affected 4.- Assembly procedure. 4.1.- Assembly/changes of thermocouples. 4.2.- Assembly/changes of inserts. 4.3.- Assembly of Back-Plate 4.4.-Mechanized
More informationTemperature Sensors. Description. Specification
Description Temperature sensors are used to measuring the temperature for the air conditioning industry. This document shows the enclosures and temperature vs. resistance curves for the standard sensors.
More informationQL (AZ4) Micro Limit Switches
SUMINITURE SIZE LIMIT SWITCHES QL (Z4) Micro Limit Switches High precision micro limit switches with excellent environment proofing Quickly upgraded to limit switches with lamps by mounting an LED lamp
More informationNTC Thermistors. Vishay FEATURES. Custom designed executions Application specific leads, housings, and connectors. NTC Thermistors Screw terminal
Custom designed executions Application specific leads, housings, and connectors TOLERANCE AT R25 C RANGE OPERATING TEMPERATURE RANGE APPLICATIONS Screw terminal 2322 640 73 5% 100 to 470k -25 to +100 C
More informationMiniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CE Series Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
More informationLight Fitting for Fluorescent Lamps Series ECOLUX 6600
> 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series
More informationPosition Switches Series 8060/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50047 > Degree of protection IP66 / IP67 > Extensive assortment of
More informationLight Fitting for Fluorescent Lamps Series ECOLUX 6600
> 1- or 2-lamp version: 18 W 36 W 58 W > Enclosure in polyester resin, glass fibre reinforced and cover in polycarbonate, impact-resistant > Quick fasteners www.stahl.de 10032E00 The light fittings series
More informationMachine nozzle with needle shut-off type HP pneumatically or hydraulically controlled
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator
More information900 Series Buccaneer BUCCANEER BUCCANEER
Terminals Sealing Gasket Retaining Nut Panel Body Contact Insert Locking Ring Main Body Contact Insert Terminals Cable Gland Gland Cage Gland Nut IP68 rating tested at 1.054kg/sq cm (15lb/sq in) 10m depth
More informationTruck-in Industrial Ovens
Truck-in Industrial Ovens Truck-In Ovens Thermal Product Solutions designs and manufactures a complete line of standard and custom Gruenberg truck-in industrial ovens to accommodate a variety of thermal
More informationVL (AZ8) Limit Switches
COMPACT SIZE LIMIT SWITCHES VL (AZ8) Limit Switches A compact and accurate vertical limit switch. Switches with indicator lamp available for convenient maintenance; either a neon AC powered lamp or an
More informationSABIX Ultra. Standards: EN EN Cat C or D IEC (halogen-free)
SABIX Ultra Standards: EN 60332-1-2 EN 60332-3 Cat C or D IEC 60754-1 (halogen-free) IEC 60754-2 + EN 50267-2-2 (corrosivity of gases) EN 61034 (smoke density) NF C 32-70 C1 (fire performance acc. to French
More informationIMMERSION HEATERS METRIC
IMMERSION HETERS METRIC INDEX Screw plug tubular heaters m45x200 pag. 04-06 Screw plug tubular heaters m77x200 pag. 07-11 with thermowell pag. 12-13 Screw plug tubular heaters 1 1/2 pag. 14 00-03 - 0515
More informationHL (AZH) Limit Switches
COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Compact, high-performance limit switch with superior environmental resistance. Broad lineup covers from die casting cases to economical plastic cases.
More informationQL (AZ4) Limit Switches
SUMINITURE SIZE LIMIT SWITCHES QL (Z4) Limit Switches High precision micro limit switches with excellent environmental protection. Quickly upgraded to limit switches with lamps by mounting an LED lamp
More informationNTC Thermistor Assemblies
FEATURES Standard and custom assemblies are available in a variety of configurations Assemblies can conveniently attach to or be an integral part of any system to monitor or control temperature No added
More informationSCHMITT. product information. Kreiselpumpen. U Pump Series. normal priming, centrifugal pumps with a single mechanical seal.
SCHMITT Kreiselpumpen chemical resistant pumps for corrosive and highly pure media product information U Pump Series normal priming, centrifugal pumps with a single mechanical seal materials: PVDF Description
More informationGenesis Modular Valves
3SETION 3.5 SPEIFITIONS Port Os: 3 /4 to 2 inches. Larger sizes and metric tubing diameters available on request Mating flange s: NW -16 through 5 standard ir fittings: 5 /32 inch One-Touch Materials ody:
More informationPosition Switches Series 8070/2
www.stahl.de > Ex e plastic enclosure > Operating temperature range -60 to +60 C > Dimensions and characteristic values according to EN 50041 > Degree of protection IP66 / IP67 > Extensive assortment of
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
More informationHIGH TEMPERATURE CABLES
HIGH TEMPERATURE CABLES C O N T E N T S DEF 61-12 Part 18 Type 1 LFH Equipment Wires :2 Technical Information for DEF 61-12 :8 PTFE Insulated Equipment Wire Single Core :10 PTFE EFGLAS Aircraft Cable :12
More informationDATA-CON-X : SEALED USB TYPE A & B CONNECTORS
FEATURES & BENEFITS Sealed to IP67 & IP68 NEMA 250 (6P) (when mated) Feed-thru termination on the panel for easy field installation Field installable design is easy to assemble Quick connect bayonet or
More informationN I S T traceable calibration equipment conforms to MIL-STD-45662A.
www.tcproducts.com 1-800-727-5646 Thermo-Couple Products Co. Turbine RTD's are used for bearing temperature measurement which provides safe and accurate monitoring. The RTD designs offer a resistance value
More information