FOR BOARD-TO-CABLE CONNECTION

Transcription

1 FOR OR-TO-LE ONNETION 240 SERIES (GENERL-PURPOSE TYPE) FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with 20 to 96 contacts are available for various purposes. iscrete-wire (WG #28, #30) I/O cables can be assembled by I. Metal covers completely protect sockets from EMI. ellows contacts ensure stable contact preventing pins from bending. The bellows contacts also have excellent stability with repeated insertion and extraction. Tails are spaced in a four-row staggered arrangement (2.54 mm mm) (0.100 in in.) for easy P board design. Insulation is UL-approved (94V-0) and is washable. n FN-230 EMI cover and dust cap can be used together. SPEIFITIONS MTERILS Item Item Materials Operating temperature range 55 to +105 Insulator Polyester (UL94V-0) urrent rating 1 onductor opper alloy Voltage rating ontact resistance 240 V 35 mω max. ( 6 V, 0.1) Plating ontact Terminal Gold plating Palladium plating Insulation resistance 1000 MΩ min. ( 500 V) ielectric withstand voltage 750 V for 1 minute Insertion force (kg) 4.5 kg max. (20 pins) Withdrawal force (kg) 0.6 kg min. (20 pins) pplicable P board 1.6 mm (0.063 in.) thick pplicable wire (standard) I: WG #28 and #30 stranded wires with φ 0.5 to 0.88 mm (0.020 to in.) insulation diameter. Soldering: WG #26 max. (reference) (The applicable wires depend on the number of contacts. See the descriptions of I sockets and metal covers.) 1

2 ORERING OE FN-24 5 P 050-G /E E: Metal type Plating G: Gold plating Number of contacts: 20, 28, 36, 50, 68, 80, and 96 Soldering eyelet: 20, 28, 36, 50, and 96 Straight: 36 and 50 ody J: Socket P: Plug Tail type 4: Straight 5: Right-angle 7: Insulation displacement connection (I) socket 240 series connector Fujitsu connector PPLITIONS FN-245P -G/E FN-247J -G/E (Socket body) FN-230 -/E (over) ocking onnectors FN-245P 096 -G/E T748 2

3 STRIGHT PLUG IMENSIONS 10.5 (0.413) 7.3 (0.278) 1.27 (0.050) 2-M2.5 (0.098) 5.6 (0.220) 5.4 (0.212) 0.4 (0.015) 1.27 (0.050) 3.4 (0.133) 0.3 (0.011) (0.075) MOUNTING HOLE LYOUT (omponent side) 36 and 96 contacts 50 contacts ±0.1 (±004) ±0.1 (±004) 1.27 ±0.1 (0.050 ±0.004 ) 2-φ2.8 (0.110 ) ±0.1 (0.075 ±0.004 ) ±0.1 (±004) ±0.1 (±004) 1.27 ±0.1 (0.050 ±0.004 ) 2-φ2.8 (0.110 ) ±0.1 (0.075 ±0.004 ) f0.80 ±0.06 f0.80 ±0.06 REOMMENE PNEL IMENSIONS ( + 0.5) ±0.1 (( ) ±0.004 ) R 1.5 ±0.1 (R ±0.004 ) 8.3 ±0.1 (0.326 ±0.004 ) ±0.1 (±0.004) Recommended panel thickness t = 1 PRT NUMERS N IMENSIONS Number of contacts Part number FN-244P036-G/E FN-244P050-G/E FN-244P096-G/E (1.714) (2.064) (3.214) (1.478) (1.828) (2.978) imensions: mm (in.) (0.850) (1.200) (2.350) (1.317) (1.607) (2.817) 3

4 RIGHT-NGLE PLUG IMENSIONS 1.27 (0.050) 0.6 (0.023) 2-M2.5 (0.098) 10.5 (0.413) 7.3 (0.287) 5.9 (0.232) 0.3 (0.011) (0.075) 0.8 (0.31) 4 (0.157) 11.8 (0.464) (0.263) 3.4 (0.133) 2-M2.5 (0.098) 8.47 (0.333) 4.37 (0.172) MOUNTING HOLE LYOUT (omponent side) 20, 28, 36, 68, 80 and 96 contacts 50 contacts ±0.1 (±0.004) ±0.1 (±0.004) 1.27 ±0.1 (0.050 ±0.004 ) 3.7 mm (0.146 in.) min ±0.1 (0.075 ±0.004 ) ±0.1 (±0.004) ±0.1 (±0.004) 1.27 ±0.1 (0.050 ±0.004 ) 3.7 mm (0.146 in.) min ±0.1 (0.075 ±0.004 ) φ0.80 ±0.06 (0.031 ±0.002 ) φ0.80 ±0.06 (0.031 ±0.002 ) 2-φ2.8 (0.110) 2-φ2.8 (0.110) PNEL INHIITE RES REOMMENE PNEL IMENSIONS ±0.1 (±0.004) ( ) 6.3 max. (0.141 max.) ( + 0.5) ±0.1 (( ) ±0.004 ) R 1.5 ±0.1 (R ±0.004 ) 8.3 ±0.1 (0.326 ±0.004 ) ( ) ( ) ( ) Unit: mm ±0.1 (±0.004) Recommended panel thickness t = 1 PRT NUMERS N IMENSIONS Number of contacts Part number FN-245P020-G/E FN-245P028-G/E FN-245P036-G/E FN-245P050-G/E FN-245P068-G/E FN-245P080-G/E FN-245P096-G/E (1.314) (1.514) (1.714) (2.064) (2.514) (2.814) (3.214) (1.078) (1.278) (1.478) (1.828) (2.278) (2.578) (2.978) imensions: mm (in.) (0.450) (0.650) (0.850) (1.200) (1.650) (1.950) (2.350) (0.917) (1.117) (1.317) (1.667) (2.117) (2.417) (2.817) 4

5 SOLERING EYELET SOKET IMENSIONS 1.27 (0.050) 5.5 (0.216) 9 (0.354) 13.4 (0.527) 6.9 (0.271) SHPES OF MIN OY EPENING ON THE NUMER OF ONTTS 20 contacts 28 contacts 36 contacts 50 contacts PRT NUMERS N IMENSIONS Number of contacts Part number FN-241J020-G/E FN-241J028-G/E FN-241J036-G/E FN-241J050-G/E (0.450) (0.650) (0.850) (1.200) imensions: mm (in.) (0.639) (0.839) (1.039) (1.389) (0.757) (0.957) (1.157) (1.507) These accessories are also used for the FN-230 series (general-purpose). Refer to the data sheet for the FN-230 series for details. 5

6 INSULTION ISPLEMENT ONNETION (I) SOKET IMENSIONS ody 1.27 (0.050) 20.3 (0.799) 9 (0.354) 5.5 (0.216) 6.9 (0.271) ssembly drawing over (0.066) 5.4 (0.212) 6.9 (0.271) 1.7 (0.066) 3 (0.050) 8.4 (0.330) 8.4 (0.330) (0.050) (0.212) 5.4 (0.212) 20.3 (0.799) over 1 3 (0.050) 2.2 (0.086) SHPES OF MIN OY EPENING ON THE NUMER OF ONTTS 20 contacts 28 contacts 36 contacts 50 contacts 68 and 80 contacts PRT NUMERS N IMENSIONS Number of Insulation diameter of imensions: mm (in.) Part number contacts applicable wire 20 φ0.65 to 0.8 mm φ0.8 to 0.88 mm FN-247J020-G/E FN-247J020-G/G FN-247J020-G/F (0.450) (0.639) (0.757) (0.659) FN-247J028-G/E FN-247J036-G/E φ0.8 to 0.88 mm φ0.8 to 0.88 mm FN-247J028-G/F FN-247J036-G/F (0.650) (0.850) (0.839) (1.039) (0.957) (1.157) (0.859) (1.059) φ0.65 to 0.8 mm φ0.8 to 0.88 mm φ0.65 to 0.8 mm φ0.8 to 0.88 mm FN-247J050-G/E FN-247J050-G/G FN-247J050-G/F FN-247J068-G/E FN-247J068-G/G FN-247J068-G/F FN-247J080-G/E FN-247J096-G/E (1.200) (1.650) (1.950) (2.350) (1.339) (1.839) (2.139) (2.539) (1.507) (1.957) (2.257) (2.657) (1.409) (1.859) (2.159) (2.559) These accessories are also used for the FN-230 series (general-purpose). Refer to the data sheet for the FN-230 series for details. 6

7 METL OVER (230 SERIES (GENERL-PURPOSE) N 240 SERIES (GENERL-PURPOSE)) IMENSIONS 12.0 (0.472) 10.0 (0.393) 32.5 (1.279) SHPES OF MIN OY EPENING ON THE NUMER OF ONTTS 20, 28, 36, 50 and 68 contacts PRT NUMERS N IMENSIONS Number of imensions: mm (in.) Part number contacts FN /E ( ) (1.139) (0.832) FN /E ( ) FN /E ( ) (1.339) (1.032) FN /E ( ) FN /E ( ) (1.539) (1.232) FN /E ( ) FN /E ( ) (1.889) (1.582) FN /E ( ) FN /E ( ) (2.339) (2.032) FN /E ( ) 96 FN /E (3.039) (2.732) 9.0 x 11.5 ( ) 7

8 METL OVER WITH POLRIZTION [230 SERIES (GENERL-PURPOSE) N 240 SERIES (GENERL-PURPOSE)] This metal cover prevents a connector from being incorrectly inserted when two or more connectors with the same number of contacts are mounted on a P board. Use the metal cover together with the polarization guide. IMENSIONS E (1.279) 7.5 (0.295) 12.0 (0.472) 10.0 (0.393) 1.4 (0.055) 0.4 (0.015) Rivet φ1.95 (0.472) φ3 (0.472) Part number : X801 Purchase a rivet if necessary. SHPES OF MIN OY EPENING ON THE NUMER OF ONTTS 20 contacts 28 and 36 contacts 50, 68, 80 and 96 contacts PRT NUMERS N IMENSIONS Number of contacts Part number FN /E FN /E FN /E FN /E FN /E FN /E FN /E FN /E FN /E FN /E FN /E (1.139) (1.339) (1.539) (1.899) (2.339) (2.639) (3.039) (3.039) imensions: mm (in.) (0.852) (1.032) (1.232) (1.582) (2.032) (2.322) (2.332) (2.007) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) 8

9 PLSTI OVER IMENSIONS 11.4 (0.448) (0.826) onfiguration able cramp Pan head machine screw Locking lever F (1.456) able diameter : φ5.8 mm (0.228 in.) PRT NUMERS FN Y/S 9

10 LE SSEMLY TOOLS The following tools are needed to assemble FN-230/230R/240/240R series connectors. able aligner (semiautomatic cable aligner or hand tool) I tool 1. able ligner Item ody/ontroller Semiautomatic cable aligner ed daptor Hand tool FN-237J FN-K560--xxx FN-237R FN-247J FN-M561-/ FN-P560-2/ FN-K560-R-xxx FN-K560-K-xxx FN-237T-T062/H FN-247R FN-P560-2/J FN-K560-J-xxx FN-247T-T061/H xxx indicates the number of contacts. 2. Insulation isplacement onnection (I) tool Item FN-237J FN-237R FN-237 FN-247J FN-247R FN-247 Hand press FN-237T-T109/H Head/Table FN-237T-T064/H FN-237T-T067/H FN-237T-T075/H FN-247T-T066/H FN-247T-T068/H FN-247T-T077/H able aligner Insulation displacement connection (I) tool 10

11 Semi-utomatic Tools able ligning Machine Main ody (FN-M , FN-M ) over 2 over 1 Wires lamp lever pplicator Sinking comb lamp section pplicator Stand able key ed 1. Set the applicator on the stand. Set covers 1 and 2 in the applicator. 2. Push the wire into the sinking combs. 3. Set the applicator onto the installation table and begin cable alignment Head (FN-H550-1/) Stand (FN-550) Lock Lever Handle Guide Stopper pplicator (FN-550-1/-xxx) I Tool (FN-237T-T109/H, FN-237T-T067/H locator) 4. Take the covers off the applicator. 5. Put covers together and pre-assemble them to the connector body. 6. onduct final aaembly as shown. FN-240R SERIES I ROUN-LE ONNETORS SOKET: FN-247J***-G/E (***: 020, 028, 036, 050, 068,080, 096) Pos No. pplied Wire (wire ia.: mm) onnector Part number Hand Tool able ligner Semi-uto I Tool #28 to #30 (0.5 to 0.65) FN-247J020-G/F FN-247J080-G/F FN-247J096-G/ E Semi-automatic-Medium Level ody: :FN-M Head ssembly: :FN-H550 pplicator: :FN-550-1/-***(***: 020, 028, 036, 050, 068, 080) Stand: :FN-550 FN-237T-T062/H F N-237T-T043/H (See below* ) FN-237T-T062/ H HN PRESS: FN-237T-T109/H HE & Locator: FN-247T-T066/H 11

12 Fujitsu omponents International Headquarter Offices Japan Fujitsu omponent Limited Gotanda-huo uilding 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo , Japan Tel: (81-3) Fax: (81-3) Web: North and South merica Fujitsu omponents merica, Inc. 250 E. aribbean rive Sunnyvale, U.S.. Tel: (1-408) Fax: (1-408) Web: Europe Fujitsu omponents Europe.V. iamantlaan WV Hoofddorp Netherlands Tel: (31-23) Fax: (31-23) Web: emea.fujitsu.com/components sia Pacific Fujitsu omponents sia Ltd. 102E Pasir Panjang Road #01-01 itilink Warehouse omplex Singapore Tel: (65) Fax: (65) Fujitsu omponents merica, Inc. ll rights reserved. ll trademarks or registered trademarks are the property of their respective owners. Fujitsu omponents merica, Inc. or its affiliates do not warrant that the content of the datatasheet is error free. In a continuing effort to improve our products, Fujitsu omponents merica, Inc. or its affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2,