W Electrical Connector Subsea / Underwater / Marine
|
|
|
- Cecilia Campbell
- 5 years ago
- Views:
Transcription
1 W Electrical onnector Subsea / Underwater / Marine The most common applications: ROV ive ell onnectors Underwater ameras and Lights Underwater Thruster Strain Termination Key eature: Multi size shell body Up to 7 contacts Pressure up to 9,00 Psi (Mated) Open face pressure up to 9,00 Psi Oil filled available as standard (O) Up to Up to 6 amp Revision 08-0
2 Options: ontact sizes for power/data requirement espoke design/configuration to suit customer requirements at no extra cost vailable in alternative materials: luminium, Titanium etc. Testing: Pressure testing up to 9,00 Psi urability testing with 00 mate and re-mate cycles Open face pressure testing up to 9,00 Psi Notes: or more information s contact RE. Part Numbering System - ulkhead Example R W 07 M INTERE TYPE LE GUGE NUMER LE LENGTH IN MM (IE 900MM) M - MLE / - EMLE NUMER O ONTTS ONNETOR SIZE R - ULKHE ONNETOR REEPTLE Part Numbering System - onnector Example PL W 07 M O Standard Mechanical Specification: INTERE TYPE LE GUGE NUMER LE LENGTH IN MM (IE 900MM) O - OIL ILLE M - MLE / - EMLE NUMER O ONTTS ONNETOR SIZE PL - PLUG IN LINE OMPONENT Shell ody ontact Insert Electrical ontacts Plating etails Retaining Nut 'O'Rings acking Washer MTERIL Stainless steel 6L Epoxy / Peek Leaded Nickel opper 97 or K um cid Gold over.5um Nickle opper lash Stainless steel / luminium ronze Nitrile NI70 lack cetal NOTES: ontact RE for special order materials. Revision 08-0
3 Reference imensions 'W' onnector langed ulkhead onnector Receptacle (R) H MIN. SPOTE G 0 ± G E Thread 7 MIN SPOTE E G H - O-ring TYPE x 0 ulkhead onnector Receptacle (R) Thread to suit bulkhead E G - O-ring TYPE /" - UN ; 8 x /" - UN 0.5 ; 7 x 0 ll dimension in mm Revision 08-0
4 Reference imensions 'W' onnector ulkhead onnector Receptacle (R) G E Thread MIN SPOTE Thread to suit bulkhead E G - O-ring TYPE /6" -UN 6 x 0 ll dimension in mm Revision 08-0
5 G Reference imensions 'W' onnector Low Profile 90 ulkhead onnector Receptacle - langed (R) L H J E Min. SPOTE 0 ±5 K E M N H J / E G H J K L - O-ring TYPE x LP0 Low Profile 90 ulkhead onnector Receptacle - Threaded (R) K Thread G L Min. Spotface Thread to suit bulkhead E G H J K L M-'O'RING N-'O'RING TYPE /"-8 UN 8 X 8 X LPT /"-8 UN 6 0 X 7 X LPT /6"-0 UN 6 X X LPT0 ll dimension in mm Revision
6 Reference imensions 'W' onnector ackshell able onnector Receptacle (PL) E G E - 'O'Ring - 'O'Ring G - 'O'Ring TYPE x 0 x 8.5 x 0 ll dimension in mm Revision
7 Reference imensions 'W' onnector Mini onnector lanking Plug - PLW - O-ring x Mini onnector lanking ap - RW 6 6 ll dimension in mm Revision
8 Reference imensions 'W' onnector Moulded able onnector Receptacle - Straight E Moulded able onnector Receptacle - 90 E ll dimension in mm Revision
9 Reference imensions 'W' onnector RW PLW RW0 PRW RW0/0 PLWO0 RW0 ULKHE RE. PLW PRW PLWO0 RW RW0/ RW RW Note: Step files for design purposes available from engineering@re-marine.com ll dimension in mm Revision
10 Pin ace View WY WY 5 WY 6 WY 7 WY Socket ace View WY WY 5 WY 6 WY 7 WY 0.75 mm Pin mm Pin NOTES: urrent rating maybe impacted by cable selection ifferent pin configurations contact RE Standard cable gauge for, way - WG ; 5,6,7 way - WG Single pin rate for, way up to 8mp / 600v Single pin rate for 5,6,7 way up to 6mp / 600v Multi pin rate contacts please contact engineering@re-marine.com ll dimension in mm Revision
A Class Expanded Beam Connector System Subsea / Underwater / Marine
www.r-marine.com lass xpanded eam onnector System Subsea / Underwater / Marine The most common applications: ROV ive ell onnectors Underwater Thruster Key eatures: Multi size shell body 1 to 4 hannel onfigurations
Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories
ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors
Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors
Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing
How to Order - MDM-PCB Series. MOUNTING HARDWARE (Shell Flange) MOUNTING HARDWARE FOR PCB TERMINATION TAIL LENGTH MODIFICATION CODE
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro- P - " ontact Spacing MM-P MM-P connectors are designed for use with flex circuitry, flat cable and printed circuit boards or multi-layer boards. They use
Gecko Connectors Introduction
Gecko ontents Introduction Screw-Lok mm pitch High-Reliability onnectors Specifications Mating Profiles Female P onnectors Female able onnectors Male P onnectors Male able onnectors Latched mm pitch High-Reliability
M300 Connectors Introduction
ontents Introduction Specifications Mating Profiles Jackscrew mm Pitch High-Reliability onnectors Female P onnectors Female able onnectors Female able ssemblies Male P onnectors Male able onnectors Male
Connectors Conforming to European Safety Standards
Series RoS ompliant onnectors onforming to European Safety Standards s of January 1995 all industrial machinery, including machine tools, which are exported to Europe must conform with European safety
VG95328 Qualified Bayonet-Lock Connectors
Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving
M40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive
Micro-D Printed Circuit Board Connectors
PB Printed ircuit Board onnectors ondensed Board Straight BS.075 Inch Spacing Save Space On Your ircuit Board These connectors feature.075 inch row spacing. The board footprint is reduced to match the
Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination
Panel Series 79 Micro-rimp Section : Panel onnectors, rimp Termination Panel Plugs With Socket ontacts, rimp Termination, 790-027S 790-027S connectors are designed for rear-panel mounting and are supplied
Gecko Connectors. SPECIFICATIONS Gecko. mating PROFiles. Mechanical. Materials. Environmental. Electrical.
onnectors SPEIFITIONS Materials Mouldings: Female ontacts: Male ontacts: Finish: Electrical Glass-filled thermoplastic UL94V-0 opper lloy PT / SMT: Phosphor ronze rimp: rass Gold urrent (individual contacts
REVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS
RVRS YONT SINGL-POL ONNTORS HIGH-URRNT, LOW-VOLTG POWR ONNTORS OR RUGGIZ MILITRY N INUSTRIL PPLITIONS RURY 2019 High Voltage lectrical Power istribution rom 0 to 60 in 3.9 Seconds High voltage electrical
Micro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector
Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
Tajimi Electronics Co
1108 series 1108 series connectors are built compact and the tight waterproofing mechanism allows the model to be at a depth 30 meters under water. This model is also ideal for application where units
Micro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors
Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated
Electrical Voltage rating Test Voltage (Vrms) service rating sea level at 21000m M N I II
JVS ronze Series pplications Navy vessels - Military - Merchant fleet - Transportation - Oceanography - attle-field cables, shelters - Signalling - ield equipments Standards MIL- 38999 Series III 75 201.002
QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS
QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage
DSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
FOR BOARD-TO-CABLE CONNECTION
FOR OR-TO-LE ONNETION 230 SERIES (GENERL-PURPOSE TYPE) ISONTINUE FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with 20 to 80 are available for
Dynamic Series Connectors
3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,
DT Family. Contents. DT Family Overview 18 DTV Series 28. Part Numbering System 18 DTMH Series 29. Dimensions 19 DTMN Series 30
ontents T amily Overview 18 TV Series 28 Part Numbering System 18 TMH Series 29 imensions 19 TMN Series 30 onfigurations 20 How To Instructions 31 Required omponents 21-22 Special Modifications 22-23 ccessories
DT Family. DT Family Overview DTM SERIES OVERVIEW DT SERIES OVERVIEW DTP SERIES OVERVIEW
T amily Overview UTSH T, TM, and TP series environmentally sealed connectors are designed for cable to cable and cable to board applications. The T connectors are used in harsh environment applications
Wall Mount Receptacle: Table of Contents MIL-DTL Series III 4 PLACES +_.012 (.300) .719 (18.26) (26.19) .938 (23.83) (31.
L-L-38 eries,,, V ilter onnectors hip-on-lex all ount Receptacle: able of ontents L-L-38 eries K0 R 1 R 2 RE Z X. V RE 4 LE 4 LE LUE (E RER RELEE O REEO YE) RE (ULLY E OR ).0 X EL KE (including mounting
17 TW SERIES. Hybrid Connector SPECIFICATIONS: MATERIALS AND PLATINGS ELECTRICAL DATA CLIMATIC DATA MECHANICAL DATA
17 TW SERIES Hybrid onnector mphenol s 17TW series hybrid -Subminiature connectors are available with power, coax, high voltage and signal contacts assembled in the same connector body. These connectors
QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS
QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage
6LGH High Voltage Connectors
LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387
Now Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
FOR BOARD-TO-CABLE CONNECTION
FOR OR-TO-LE ONNETION 240 SERIES (GENERL-PURPOSE TYPE) FETURES 1.27 mm (0.050 in.) pitch contact arrangement in two rows enables high-density mounting. onnectors with 20 to 96 contacts are available for
Miniature Break Away Release Connector
8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:
MCON INTERCONNECTION SYSTEM
MON INTERONNETION SYSTEM for the utomotive Industry TE UTOMOTIVE /// MON Interconnection System INNOVTIVE TEHNOLOGIES TE onnectivity (TE) is a leader in automotive connectivity and sensor technology. Our
JFA CONNECTOR METAL SHELL SERIES
JF ONNETOR METL SHELL SERIES Disconnectable rimp style (Wire-to-wire connectors) Metal shell type I/O connector which contacts are used also with JF connector J2000 series and J300 series. 2, 3 or s for
Industrial Connectivity and Control Products Index. Section G
Section G Industrial onnectivity and ontrol Products Type Page Number Mini-Quick ontrol onnectors G-2 Features and enefits G-3 2-6 Pole Plugs G-4-2-6 Pole Receptacles G-6-7 7-12 Pole Plugs G-8-9 7-12 Pole
connectors D range Connectors Special D Standard D Crimp D High Density D D Accessories COMMERCIAL D SUB-MINIATURE HIGH PERFORMANCE D SUB-MINIATURE
connectors range Special OMMIL SU-MINITU Standard HIGH POMN SU-MINITU LXIL N ST SSMLY SU-MINITU High ensity INS NSITY SU-MINITU ccessories onnectors Special OMMIL SU-MINITU Special range of connectors
Rack & Panel Rectangular Miniature Subminiature Environmental Removable Contacts
Rack & Panel Rectangular Miniature Subminiature Environmental Removable ontacts Table Of ontents Series Description Page MR Miniature Rectangular onnectors With Removable ontacts 2-10 X External Miniature
PCB layouts. High Density D only. 50 way 50 way DIMENSIONS. 15 way High Density D 26 way High Density D. 62 way High Density D. 44 way High Density D
Straight p.c. - way 0º p.c. - way P layouts 2.84 S 2 Ø 0.76 min. S 2 Ø 0.76 min. Plug viewed from above, socket viewed from below. 2 holes at Ø 3.2 min. (2 holes at Ø 3.0/3. boardlock only)* ONT 2 holes
ca_b1-b66.qxd:layout 1 2/9/11 7:58 PM Page 1 Mini Circular
Microminiatuare ircular -.050" ontact pacing MIO- MIO- microminiature circular connectors are rugged yet lightweight - and meet or exceed the applicable requirements of MI- T-8353. pplications include
DSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
RWZ CONNECTOR. 1Certified LR Features. Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
isconnectable rimp style Wire-to-wire connectors Features urability With the bellows type contacts, 2, cycles of mating/unmating is guaranteed. In addition, low insertion and withdrawal force is realized.
JFA CONNECTOR METAL SHELL SERIES
JF ONNETOR METL SHELL SERIES Wire-to-wire connectors (For Interface) Metal shell type I/O connector which contacts are used also with JF connector J2000 series and J300 series. pplicable contact and tooling
MIL-DTL Micro-D Connector
Specication MIL-TL-83513 Micro- onnector MIL-TL-83513 Micro- onnector R04J Series rimp ontact Type nvironment temperature: ~ Vibration: 10z~2000z, 196m/s Random vibration: Power spectrum density 0.4 z
IPT SE and IPT Series
IPT S and IPT (MI-T-26482 Serie I) and Tools IPT S and IPT Series and Tools Section 3057- able lamp / 3057- able lamp -2 ; -3 34 and 34- Neoprene Sleeve -4 IPT 3180- and IPT 3180-F Protective Plug overs
MIL Class M Series D*M D*MA connectors and crimp contacts
eatures/enefits *M (Removable crimp contacts technology) : QPL listed 24308 class M onnectors *M (Solder bucket) : QPL listed 24308 class M onnectors *M (90 P) : QPL listed 24308 class M onnec tors Non-Magnetic
Specifications. Features. Crimp Type Connectors For Mating To Mate With Pin Wafer Ass y. 2.5mm Pitch Connectors Wire to Board 0.
05 rimp Type onnectors For Mating To Mate With ss y Pitch onnectors Wire to oard onnectors connectors are miniature type connectors which were developed with concepts for versatile usage for P.. board
WEATHER-PACK. Special Products. Cross Sectional View WEATHER-PACK FEMALE TERMINALS (SLEEVE) SEALED* WEATHER-PACK CABLE SEALS
pecial Products ELE E L E WETHER-PK ross ectional View leeve Pin Hinged TP Hinged TP able onnector eal able eal able able eal Female onnector ssembly Male onnector able eal WETHER-PK FEMLE TERMINL (LEEVE)
Micro-D TwistPin Connectors and Accessories Product Selection Guide
Micro-D TwistPin onnectors and ccessories Product Selection Guide MIL-DTL-833 onnectors Section Glenair OTS Micro-D onnectors Section Micro-D Printed ircuit oard onnectors Section Micro-D ackshells and
PCB Single Row Connectors
SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors
MCON INTERCONNECTION SYSTEM
MON INTERONNETION SYSTEM FOR THE UTOMOTIVE INDUSTRY TE UTOMOTIVE /// TLOG SOLUTIONS FOR FUTURE MOILITY The pace at which the E&E architecture of vehicles is being innovated is one of the major challenges
DMS Series. Commercial Version MIL-C-5015 Compatible DMS FEATURE
MS Series ommercial ersion MI--5015 ompatible MS MS series connectors are intermateable and intermountable with MI--5015 connectors. The MS series offers: ard dielectric interial (diallyl phthalate) Zinc
INTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors
OUO etronics ndia, established as manufacturers of connectors in, has grown into a leading producer and exporter of grade electrical connectors and related accessories. etronics ndia's continuing mission
Series 804 Push-Pull Mighty Mouse Protective Cover Ordering Information
T Electronic omponents, Inc. Protective over Ordering Information and 809-198 807-198 Plug over See next page for ordering info Protect onnectors From Damage Machined aluminum covers prevent ingress of
SOLENOID VALVES direct operated core disc 1/4
SOLENOI VLVES direct operated core disc / N U NO / Series 70 FETURES Three-way solenoid valves with orifice and pipe connections in valve body enabling convenient installation ompact valve intended for
Low Mating Force how to order (military types)
how to order (military types) M, D, P onnectors Military Part Ordering Procedure Example part number M55302/16610X1 is shown as follows: ody Type/ ontact Style Rows M55302 /166 10 X 1 ontacts per Row Tail
INTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors
IOUIO etronics India, established as manufacturers of connectors in, has grown into a leading producer and exporter of I grade electrical connectors and related accessories. etronics India's continuing
Thermocouple & RTD Accessories (Thermowells, Connectors & Fittings)
Thermocouple & RTD ccessories (Thermowells, onnectors & Fittings) TLE OF ONTENTS ESSORIES FOR THERMOOUPLE & RTD s MODEL DESRIPTION PGE P SERIES THERMOWELLS 96 X1 THERMOOUPLE EXTENSION LES 97 X2 RTD EXTENSION
SPOOL VALVES pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NAMUR style, 1/4 to 1/2
FTURS SPOOL VLVS pilot operated or air operated, spool type single/dual solenoid or air (mono/bistable function) aluminium body, NMUR style, / to / SO/JOUOMTI solenoid valves satisfy all relevant irectives
DEUTSCH 9316 SERIES FOR MARINE AND OFFSHORE APPLICATIONS
DUTH 936 I FO MIN ND OFFHO ITION Harsh nvironment, Flameproof onnectors for ugged eliability and afety MIN OI ND G /// 936 I ONTNT Introduction/pecifications 3 ynopsis / ing ystem 4-5 ontact rrangements
2mm Pitch, Positive Lock, Wire-to-Board Connector (UL, C-UL Listed)
2mm Pitch, Positive Lock, Wire-to-oard onnector (UL, -UL Listed) DF51 Series Secure Mating Lock Insertion force curb Jan.1.2019 opyright 2019 HIROSE ELETRI O., LTD. ll Rights Reserved. Features 1. Positive
Amphenol. Amphe 309 PIN & SLEEVE. IEC & UL Industrial plug, sockets-outlets & mechanical interlocks.
mphe 309 PIN & SLEEVE IE & UL Industrial plug, sockets-outlets & mechanical interlocks 97 Series onnectors are UL recognized and S recognized. INDUSTRY EXMPLES Marinas LVS old Ironing Data enters 309 309
Contact resistance : environmental class hermetic class
525 eries pplications or all general purposes in civil aeronautical applications tandards N 93422 32 NL 5413 N 1599 M T1 list LN 2954 escription Light weight version of MIL 2642 eries II Intermateable
ODU-MINI-SNAP. Series F - IP50 and IP68 FP-Locking Concept Keying with Halfshells. Series F
OU-MINI-SNAP Series - IP and IP68 P-Locking oncept Keying with Halfshells Series OU-MINI-SNAP Series The Push-Pull Locking Principle: P Locking roove onical Sleeve Locking ingers Outer Housing Back Nut
SOLENOID VALVES no voltage release (lever type) manual reset construction 1/4 to 1/2
SOLENOI VLVES no voltage release (lever type) manual reset construction 1/4 to 1/2 U 1 3 2 3/2 Series 307 FETURES Lever type Manual Reset function which means that the valve has to be energized as well
MIL-C 26482G Series II
pplications or all general purposes in military applications Standards MIL 2642 Series II QPL approved escription Standard version luminium alloy : olive green, nickel or, black, anodized plating ayonet
SOLENOID VALVES direct operated core disc 1/4
SOLENOI VLVES direct operated core disc /4 N U NO / Series 4 FETURES ompact valve intended for single-acting actuator control Epoxy moulded coil for general service applications oils interchangeable without
INSTRUCTION SHEET
330086-000 INSTRUTION SHEET Instruction for Installation and Maintenance of Powertite Series: Pin and Sleeve Receptacles, Plugs and able onnectors (30, 60, 100 and 150 mpere) For Use With opper onductors
Amphenol Amphe-Armor Series Rugged Over-molded Connectors
mphenol mphermor eries ugged Overmolded onnectors rugged connector originally designed for the geophysical industry and the exploration of natural resources, where connectors are needed to withstand the
Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
Hydro Bond Engineering Ltd Surface Mateable Hybrid Coaxial Connectors: Coaxial & Electrical : Metal Keyed / HDM / HYB
Hydro Bond Engineering Ltd Surface Mateable Hybrid Coaxial Connectors: / HDM / HYB sales@hydrogroup.uk www.hydrogroupcom tel: +44 (0)1224 822996 fax: +44 (0)1224 825142. sales@hydrogroup.uk www.hydrogroup-asia.com
MIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1
MIL-PRF-39012 QPL onnectors MIL-PRF-55339 QPL dapters Online atalog Volume 1 Delta QPL connectors and adapters meet or exceed all requirements of MIL-PRF-39012 and MIL-PRF-55339. ecause these specifications
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, NAMUR, 1/4
FTURS The monostable spool valves in conformity with I 650 Standard (200 route 2 H version) have TÜV certified with integraty levels: SIL 2 for HFT = 0 / SIL for HFT = The solenoid operated spool valves
Cannon D-Subminiature Accessories
annon -Subminiature ccessories annon -Subminiature ccessories Selection Guide Locking Hardware Sliding Lock emale Screw Lock Male Screw Lock Retainer Slide Lock Post Spring Latch Plate Spring Latch ackshell
Manual Equipment. Manual Lever Hoists L 5 H V E. L5H or SLB Series ordering menu. 62 Air Winches & Hoists L5H150 L5H300 L5H600 L5H1200
Manual Ingersoll Rand also offers manual trolleys to equip your small capacity hoists and manual hoists which are very useful for casual material handling work. Manual Lever Hoists L5H Heavy duty, high
quick couplings HQC Series Instrumentation Quick Couplings Typical Applications Features & Benefits Technical Data
HQ Series Instrumentation Quick ouplings Typical pplications Laboratories University labs Gas distribution iopharmaceutical Technical Data ONSTRUTION 36 Stainless steel* NOMINL FLOW SIZES /4, 3/8, / MXIMUM
MS/Standard DL-Class Pre-Earth type
MS/Standard L-lass Pre-arth type mphenol R mphenol ML--5015 onnectors L Series Pre-earth type L Series are highly reliable circular connectors (wire soldering type) approved by TUV satisfying uropean safety
Microminiature. Micro Edgeboard -.050" Contact Spacing MEB. Specifications. How to Order.
ca_1-102:layout 1 2/10/11 11:51 M Page 1 Micro dgeboard -.050" ontact Spacing M The Micro dgeboard (M) connector series provides a combination of high density and high reliability for applications in airborne
WILDCAT CONNECTORS
UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS
Amphenol Amphenol Pcd Terminal Junction Systems
igh Quality Interconnect Products or Military and erospace pplications mphenol mphenol Pcd Terminal unction Systems Terminal unction Systems MIL-T-171 Series I lass MIL-T-171 Series I unction Modules QPL-approved
Your Global Source for Today s Most Popular Solenoid Valves
lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves Your Global Source for Today s Most Popular Solenoid Valves lcon Solenoid Valves, a division of International
FILTER D-SUB. connectors
FILTER -SUB connectors table of contents MIL-TL-24308...3 Layouts...3 -Subminiature onnectors...4 How to order...5 MIL-TL-83513...6 onnectors and Layouts...7 How to order...8 OMBO -SUB MINITURE... 9 High
D-SUB SERIES. Lightweight backshells 3401/072 MATERIALS AND FINISHES. Features and Benefits. Typical Applications. Specification.
-SU SERIES Lightweight backshells 3401/072 Features and enefits ompliant with ES specifications 3401/072 Ultra-light weight Solid fully machined aluminium alloy material Non magnetic EMI pplication Typical
PowerMod PSX. Connector Series SPECIFICATIONS. Features. Blindmate Housings Allows PCB boards connections in tough to reach applications.
PowerMod PSX onnector Series he PowerMod PSX family of connectors is designed to offer low profile, high density, board to board blindmate connectors that provide either power contacts or power and signal
BRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2
RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14
USCAR - T4/V4 ISO VIEW (WITH CLIP SLOT)
INEX PGE TITLE PGE TITLE LOK / ONNETOR SPEIFITIONS REVISION LOK / GENERL NOTES SM IGRM / KEYING TLE PRT LOK [KP LOK (IF REQUIRE)] EXPLOE VIEW / MTERIL SPEIFITIONS 5 TUM LOTIONS / FETURE ONTROL VIEWS 6
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4
SOLNOID VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 N 0 / Series 55 FTURS The monostable spool valves have TÜV certified I 650 Functional Safety data and
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, 1/4
SOLNOID VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) brass body, /4 N 0 / Series 55 FTURS The monostable spool valves in conformity with I 650 Standard (00 route H version)
Metal Gasket Face Seal Fittings
Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,
The Centi Line -.075" Contact Spacing
The enti Line -.075" ontact Spacing The annon enti connectors are especially suitable for commercial applications such as computers, instrumentation, communications and audio equipment. They are available
SOLENOID VALVES pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1
SONOI VVS pilot operated, high flow, heavy duty single solenoid / dual solenoid 1/4 to 1 TURS Rugged forged brass bodied solenoid valves (mono- or bistable function) designed to provide maximum flow Solenoid
TYPICAL SWITCH ORDERING EXAMPLE A2 G 40. Contact Materials & Ratings
MB4 s & ircuits SPDT ON (ON) DPDT ON (ON) ( ) = Momentary E E S S Bushings Smooth with D Flat Threaded with D Flat IMPORTNT: Switches are supplied without UL, culus & S marking unless specified. UL, culus
A Complete Miniature Range Threaded, Break Away, Bayonet
omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical
MICRODOT Microminiature D Connectors. MICRODOT Microminiature D Connectors Introduction
MIRODOT Microminiature D onnectors Introduction Product Facts Designed for both military and commercial applications Low engaging force is achieved by the manner in which Twist ontacts are designed The
TYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
Bike Bollard R-7904 (RSA)
ike ollard R-0 (RS) General escription: The R-0 ike ollard offers versatile design and functionality. ike-locking arms are bolted internally to applications. R-0 ike ollards are made from carbon steel
Amphenol Heavy Duty Cylindrical Connectors
mphenol Heavy Duty ylindrical onnectors 12-052-9 mphenol mphenol Heavy Duty ylindrical onnectors MIL--22992/Proprietary High urrent apacity Rugged onstruction Safety Serviceability mphenol meets the demands
atalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li
Vacuum ups Section 3 Parker annifin orporation ivision atalog 0802-2/US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single
MIL-C-5015 Bulkhead Receptacles
I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient
Fluid Cooling Shell & Tube B / SB Series
Fluid ooling Shell & Tube / S Series 0916 erformance Notes Young Touchstone thermal interchange ompetitively priced 1/4" or 3/8" tubes available Water to water applications Sea water applications, O-Ring,
SOLENOID VALVES pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NAMUR, 1/4-1/2
SOLNOI VLVS pilot operated, spool type single/dual solenoid (mono/bistable function) stainless steel body, NMUR, / - / / N 5/ 5 5 0 5 5 / 5/ Series 55-55 FTURS The monostable spool valves have TÜV-XI certified
Series Overview *SOP (Small Outline Packages, Gullwing Leads) SMT Devices. Series IC51 (Clamshell) SOP, TSOP Type I & II
SMT evices Series Overview *SOP *SOP variations e.g. TSSOP... Series I51 (lamshell) SOP, TSOP Type I & II 1,000MΩ min. at 500V ielectric Withstanding Voltage: 700V for 1 minute ontact Resistance: 30mΩ