Series 804 Push-Pull Mighty Mouse Protective Cover Ordering Information

Size: px
Start display at page:

Download "Series 804 Push-Pull Mighty Mouse Protective Cover Ordering Information"

Transcription

1 T Electronic omponents, Inc. Protective over Ordering Information and Plug over See next page for ordering info Protect onnectors From Damage Machined aluminum covers prevent ingress of contamination and water. Stainless Steel Fittings and Rings hoose small diameter eye fittings for panel attachment. Larger rings fit under the jam nut or over cable jackets. Split rings can be installed on fully assembled cables. how to order Receptacle overs Polyurethane-oated SST Wire Rope offers high strength, excellent abrasion resistance and good flexibility. Or, choose Teflon jacket for high temperature exposure. raided provides excellent flexibility and good abrasion resistance, and can be ordered with slip knot fittings for easy installation on any size cable. Sample Part Number M 9 H 6-14 R Series Shell Material / Finish Shell Size Type Length in Inches Ring Type and Dia. ode Pull Ring Option Protective over for use with Receptacle onnectors luminum / lack nodize (Non-onductive) M luminum / Electroless Nickel NF luminum / admium with Olive Drab ZN Nickel with Olive Drab ZNU Nickel with lack MT luminum / Nickel-PTFE Z1 Stainless Steel / Passivated H Teflon Jacket N No S SST Sash hain SK With Slip Knot T No Jacket U Polyurethane Jacket "SST" = Stainless Steel attachment Type N (No ) Example "-6" equals six inch length attachment Types N (No ) and SK (Slip Knot) Small Ring Large Ring Split Ring (3.20) I.D (3.68) I.D (4.78) I.D (5.00) I.D (9.78) I.D (11.30) I.D (14.48) I.D (16.13) I.D (17.65) I.D (22.48) I.D (27.17) I.D (28.83) I.D (10.67) I.D (12.19) I.D (16.13) I.D (18.92) I.D (22.48) I.D (25.65) I.D (28.58) I.D (34.16) I.D. None R Supplied With Pull Ring

2 T Electronic omponents, Inc. Protective over Ordering Information Plug overs E F J K L how to order Plug overs Sample Part Number M 12 H 6-14 Series Protective over for use with Plug onnectors Shell Material / Finish luminum / lack nodize (Non-onductive) M luminum / Electroless Nickel NF luminum / admium with Olive Drab ZN Nickel with Olive Drab ZNU Nickel with lack MT luminum / Nickel- PTFE Z1 Stainless Steel / Passivated Shell Size Type H Teflon Jacket N No S SST Sash hain SK With Slip Knot T No Jacket U Polyurethane Jacket "SST" = Stainless Steel Length in Inches attachment Type N (No ) Example "-6" equals six inch length Ring Type and Dia. ode attachment Types N (No ) and SK (Slip Knot) Small Ring Large Ring Split Ring (3.20) I.D (3.68) I.D (4.78) I.D (5.00) I.D (9.78) I.D (11.30) I.D (14.48) I.D (16.13) I.D (17.65) I.D (22.48) I.D (27.17) I.D (28.83) I.D (10.67) I.D (12.19) I.D (16.13) I.D (18.92) I.D (22.48) I.D (25.65) I.D (28.58) I.D (34.16) I.D. Shell Key Position Omit for Single Master Key Pos. (Normal) Pos. Pos. D Pos. D

3 T Electronic omponents, Inc. Protective Receptacle over Information ttaching a Receptacle over to a Rear Panel Mounted Jam Nut Receptacle ttaching a Receptacle over to a Panel With a Screw TTHMENT RIN FITS UNDER JM NUT PROTETIVE OVER PNEL REEPTLE ONNETOR STYLE 07 SMLL RIN SREW ONNETOR JM NUT PROTETIVE OVER ode Size ±.010 ±0.25 ±.015 ± , 7, , Small Ring for ttaching Receptacle overs to a Panel with a Screw ttaching a Receptacle over to a Front Panel Mounted Jam Nut Receptacle TTHMENT RIN FITS UNDER FLNE PROTETIVE OVER PNEL REEPTLE ONNETOR STYLE 00 Dia. Screw In. mm. In. mm. ode Size ±.005 ±0.13 Max. Max. 01 #4, M # #8, M # JM NUT ode Size ±.010 ±0.25 ±.015 ± , , ,

4 vailable from: T Electronic omponents, Inc. Protective Plug over Information and ttaching a over to a able ssembly With a Install cover onto the back of the connector before overmolding or backshell installation. ttaching a over to a able Using a Split Ring or Slip Knot Split rings can be installed onto finished cables. INSTLL SPLIT RIN OVER LE JKET E #4-40 FILL. HD. SREW #4-40 LOKNUT ND SPLIT WSHER F ode Size ±.010 ±0.25 ±.015 ± , , , Large Split Ring for ttaching overs to ables Dia. ode Max. able Dia. (in.) Ring Diameter Min. ID Max. OD In. mm. In. mm J K L SMLL RIN SREW ONNETOR PROTETIVE Dimensions in inches (millimeters) OVER and are subject to change without notice.

5 T Electronic omponents, Inc. Protective Plug and Receptacle over Dimensions and ø LENTH ±.25 (6.4) ø OPTIONL PULL RIN O RIN 1.10 (27.94) LENTH ±.25 (6.4) DETENT SPRIN.750 (19.05).580 (14.73) Plug over Receptacle over Shell Ø Max. Ø Max. Ø Max. Size In mm In mm In mm Lanyard options Polyurethane oated Wire Rope -55 to +100., black, very flexible, very good abrasion resistance, good resistance to fuels,.120" (3mm) diameter lack polyurethane over stainless steel rope, -55 to +125., very flexible, excellent abrasion resistance, excellent resistance to fuels,.080" (2mm) diameter materials and finishes over luminum alloy or stainless steel O-ring Fluorosilicone rubber Wire,Hardware Stainless steel, passivated Teflon Jacketed Wire Rope Sash hain Slip Knot (SK) for ttaching overs to able Translucent FEP jacket over stainless steel, -55 to +200., fair flexibility, good abrasion resistance,.100" diameter Stainless steel, #8 chain,.240" (6mm) 55 to +100., black, very flexible, very good abrasion resistance, good resistance to fuels,.120" (3mm) diameter. Length includes.5" (13mm) diameter loop.

2M804 Push-Pull Receptacles Protection Caps Ordering Guide for 2M

2M804 Push-Pull Receptacles Protection Caps Ordering Guide for 2M Push-Pull Receptacles Protection aps Ordering Guide for 2M667-202 Push-Pull Protective aps are available in plug and receptacle versions. Protective caps keep the connector interface dry and clean while

More information

Made to order cable assemblies

Made to order cable assemblies Think he ll ever break that hold? Nope. He s got him in a ull Nelson. SRIS 80 Made to order cable assemblies Nothing quite says "turnkey" like a factory-terminated and -tested Mighty Mouse ordset. rom

More information

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard

Amphenol s 2M Micro38999 Connector Series The New Aerospace Standard Tri-Start Threaded Coupling General Information Page Guide Order... C29 Weight... C30 Plugs... C31 In-Line... C32 Square Flange... C33 Jam Nut... C34 PCB Sq Flange... C35 PCBJam Nut... C36 PCB Double Flange.

More information

2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools

2M Accessories, Contacts, and Tools. 2M Accessories, Contacts, and tools. Page Guide. Accessories. Micro Contacts Tools 2M, Contacts, and Tools Page Guide Contact Tools... 98 Assembly... 99-100 Plugs Tools... 101, 102 2M Python... 103 Strain Relief Clamp.. 104, 105 Micro Band Adapter... 106-109 Enviromental Backshells...

More information

2M805 Tri-Start Threaded Coupling

2M805 Tri-Start Threaded Coupling 2M805 Tri-Start Threaded Coupling General Information 2M Specs 2M801 2M803 2M804 2M805 Series Micro Miniature Connectors: s 2M805 Series of connectors offers the best EMI and Vibration performance among

More information

Series 801 Mighty Mouse Double-Start ACME Thread Receptacle

Series 801 Mighty Mouse Double-Start ACME Thread Receptacle ouble-start ACME Thread Receptacle 801-009 and 801-010 Ordering Information Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02/12/22 In-Line Style 01 How To Order Sample Part Number 801-010

More information

Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle

Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle Series 801 Mighty Mouse Double-Start ACME Threads Crimp Receptacle 801-009 and 801-010 - Ordering Information In-Line Style 01 Rear Panel Jam Nut Mount Style 07 Square Flange Mount Style 02 How To Order

More information

2M805 Tri-Start Threaded Coupling

2M805 Tri-Start Threaded Coupling 2M805 Tri-Start Threaded Coupling Ordering Guide for 2M805 Plug & Receptacle 2M805 Series Connector - Alternate Series Style Service Class Insert Arrg. Contact Type Position 2M805-00X -16 C 15-37 S A SERIES

More information

PART NUMBER BREAKDOWN

PART NUMBER BREAKDOWN SERIES 34 O-Ring Sealed Shorting Cap Series 34 Shorting Caps are for use at the rear of shorting plugs, special test connectors, fiber optic loopbacks and other applications. variety of lanyard options

More information

PCB Single Row Connectors

PCB Single Row Connectors SERIES PB Single Row onnectors Vertical Surface Mount PB onnectors with Jackscrews How to Order Vertical Surface Mount PB onnectors feature gold alloy TwistPin contacts. These nanomimiature connectors

More information

Miniature Break Away Release Connector

Miniature Break Away Release Connector 8 Series reak way Miniature reak way Release onnector Space saving with scoop proof connector for harsh and EMI applications. compact solution iameter up to 45% smaller than 38999 9. Integrated backshell:

More information

97 series crimp type plugs with solid shells

97 series crimp type plugs with solid shells 97 series crimp type plugs with solid shells 97-4106A L Max. N Ref. Q Max. V Fitting Threads Inch mm Inch mm Inch mm 10SL 1-3/8 34.93 3/4 19.057/8 22.23 5/8-24 12S 1-7/16 36.50 25/32 19.84 1 25.40 5/8-24

More information

8D Series D38999 Aluminum Series

8D Series D38999 Aluminum Series onnector part numbers Basic Series 8D 0-11 W 35 P N L style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI shielding Also available:. Square flange receptacle

More information

MIL-C Fiber Optic Connectors

MIL-C Fiber Optic Connectors Developed and produced by Packard-Hughes Interconnect (PHI), the MIL-C-28876 Fiber Optic Connector features low optical insertion loss, repeatability, exceptional strain relief, and reliability in harsh

More information

Micro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors

Micro-D MWDM-CBR Right Angle Thru-Hole Printed Circuit Board Connectors Micro-D PB Micro-D MWDM-BR Printed ircuit Board onnectors High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated

More information

REVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS

REVERSE BAYONET SINGLE-POLE CONNECTORS VG96929 HIGH-CURRENT, LOW-VOLTAGE POWER CONNECTORS FOR RUGGEDIZED MILITARY AND INDUSTRIAL APPLICATIONS RVRS YONT SINGL-POL ONNTORS HIGH-URRNT, LOW-VOLTG POWR ONNTORS OR RUGGIZ MILITRY N INUSTRIL PPLITIONS RURY 2019 High Voltage lectrical Power istribution rom 0 to 60 in 3.9 Seconds High voltage electrical

More information

Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors

Series 79 Micro-Crimp Section F: Straight Printed Circuit Board Connectors Section : Straight Printed ircuit oard Receptacles With Pin ontacts, Straight Termination, 790-043P 790-043P connectors feature thru-hole termination to rigid or flexible circuits. These free-standing

More information

VG95328 Qualified Bayonet-Lock Connectors

VG95328 Qualified Bayonet-Lock Connectors Qualified ayonet-lock onnectors igh-ensity MIL--26482 Type onnectors Qualified for Rugged Military and Industrial pplications United States United Kingdom Germany rance Nordic Italy Spain Japan Now rriving

More information

MIL-DTL 38999Series III Aluminium Series

MIL-DTL 38999Series III Aluminium Series MIL-DTL 38999Series III Aluminium Series 13 Connector part numbers Basic Series 8D 0-11 W 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 7: Jam nut receptacle 5: Plug with RFI

More information

Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination

Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination Series 79 Micro-rimp Section : onnectors, rimp Termination Receptacles With Pin ontacts, rimp Termination, 790-026P 790-026P connectors are designed for rear-panel mounting and are supplied with conductive

More information

Connectors Conforming to European Safety Standards

Connectors Conforming to European Safety Standards Series RoS ompliant onnectors onforming to European Safety Standards s of January 1995 all industrial machinery, including machine tools, which are exported to Europe must conform with European safety

More information

Amphenol 97 Series MIL-DTL-5015

Amphenol 97 Series MIL-DTL-5015 Amphenol 97 Series MIL-DTL-5015 MATES WITH ALL THREADED MIL-DTL-5015 CONNECTORS The 97 series is a durable, cost-effective MIL-DTL-5015 available in a variety of shell styles, sizes, contacts, and layouts.

More information

8D Series D38999 Composite Series

8D Series D38999 Composite Series Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: - : Connectors with standard crimp contacts. L: Receptacle with long PC

More information

Now Available in Black Zinc Nickel

Now Available in Black Zinc Nickel 847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances

More information

8D Series D38999 Composite Series

8D Series D38999 Composite Series Connector part numbers Basic Series 8D 0-11 J 35 P N L Shell style: 0: Square flange receptacle 5: Plug with RFI shielding Type: -: Connectors with standard crimp contacts. L: Receptacle with long PC tail

More information

A Complete Miniature Range Threaded, Break Away, Bayonet

A Complete Miniature Range Threaded, Break Away, Bayonet omplete Miniature Range Threaded, reak way, ayonet onnection Technologies Presentation The micro38999 ranges are made to meet a new generation of applications where space and weight are limited (Tactical

More information

MIL-DTL-38999Series III Composite Series

MIL-DTL-38999Series III Composite Series MIL-DTL-38999Series III Composite Series 25 Connector part numbers Basic Series 8D 0-11 J 35 P N ** Shell style: 0: Square flange receptacle 1: In line receptacle 5: Plug with RFI shielding. Type: -: Connectors

More information

Series 80 Mighty Mouse Technical Reference Complete Product Specification

Series 80 Mighty Mouse Technical Reference Complete Product Specification Summary Performance Specifications Current Rating (Maximum): Size #23 Contact: 5 A., Size #20 contact: 7.5 A., Size #16 contact: 13 A., Size #12 contact: 23 A. Test Voltage (Dielectric Withstanding Voltage)

More information

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

Micro-D Printed Circuit Board Connectors

Micro-D Printed Circuit Board Connectors PB Printed ircuit Board onnectors ondensed Board Straight BS.075 Inch Spacing Save Space On Your ircuit Board These connectors feature.075 inch row spacing. The board footprint is reduced to match the

More information

Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination

Series 79 Micro-Crimp Section E: Panel Mount Connectors, Crimp Termination Panel Series 79 Micro-rimp Section : Panel onnectors, rimp Termination Panel Plugs With Socket ontacts, rimp Termination, 790-027S 790-027S connectors are designed for rear-panel mounting and are supplied

More information

Series 801 Hermetic Receptacles feature 304L stainless steel shells, fused vitreous glass insulators and Alloy 52 iron alloy contacts.

Series 801 Hermetic Receptacles feature 304L stainless steel shells, fused vitreous glass insulators and Alloy 52 iron alloy contacts. 801-012 Series 801 Hermetic Receptacle Double-Start AM Threads How to Order Information Series 801 Hermetic Receptacles feature 304L stainless steel shells, fused vitreous glass insulators and Alloy 52

More information

Cobra. Mighty Mouse TECHNICAL SPECIFICATIONS

Cobra. Mighty Mouse TECHNICAL SPECIFICATIONS Mighty Mouse Cobra TECHNICL SPECIICTIONS 0-0 triple-start with self-locking coupling nut, exploded view How To Order Mighty Mouse Cobra Plug Connector and ackshell ssemblies Sample Part Number 0-0-2 ZNU

More information

micro38999 SERIES High Vibration Miniature Connectors Qualified According MIL-DTL-38999

micro38999 SERIES High Vibration Miniature Connectors Qualified According MIL-DTL-38999 micro38999 SERIES High Vibration Miniature onnectors Qualified ccording MIL-TL-38999 8, 8 & 8LT Series Presentation The micro38999 Series (8, 8 and 8LT ranges) is made to meet a new generation of applications

More information

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS

QUALIFIED BAYONET-LOCK CONNECTORS VG95234 CRIMP-CONTACT MIL-DTL-5015 TYPE ELECTRICAL CONNECTORS FOR RUGGEDIZED POWER AND SIGNAL APPLICATIONS QULIFIED YONET-LOK ONNETORS RIMP-ONTT MIL-DTL-5015 TYPE ELETRIL ONNETORS FOR RUGGEDIZED POWER ND SIGNL PPLITIONS JUNE 2017 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High voltage

More information

Micro-D TwistPin Connectors and Accessories Product Selection Guide

Micro-D TwistPin Connectors and Accessories Product Selection Guide Micro-D TwistPin onnectors and ccessories Product Selection Guide MIL-DTL-833 onnectors Section Glenair OTS Micro-D onnectors Section Micro-D Printed ircuit oard onnectors Section Micro-D ackshells and

More information

Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories

Circular Connectors. Contents. Introduction Specifications Cable Connectors Panel Connectors Accessories ircular onnectors ontents Introduction Specifications able onnectors Panel onnectors ccessories ircular onnectors These connectors are designed for use in harsh environments. The high specification connectors

More information

MIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev )

MIL-C (Series 1, 2, 3 & 4) Updated February 2013 (Rev ) MIL-C-3 (Series, 2, 3 & 4) Updated February 23 (Rev 23-2) ABN: 6 2 6 24 The D3 Series of connectors were designed for both performance and mechanical robustness to meet many demanding applications in:

More information

DMS Series. Commercial Version MIL-C-5015 Compatible DMS FEATURE

DMS Series. Commercial Version MIL-C-5015 Compatible DMS FEATURE MS Series ommercial ersion MI--5015 ompatible MS MS series connectors are intermateable and intermountable with MI--5015 connectors. The MS series offers: ard dielectric interial (diallyl phthalate) Zinc

More information

MIL-C-5015 Bulkhead Receptacles

MIL-C-5015 Bulkhead Receptacles I5015 ulkhead eceptacles F/TF How to Order TF and F pressurized bulkhead receptacles mate with standard S type plugs (3106,3107 and 310) if contact arrangements correspond. oth the F and TF have resilient

More information

PART NUMBER BREAKDOWN CP A 70 1 W D H - 10

PART NUMBER BREAKDOWN CP A 70 1 W D H - 10 SERIES 70 EMI/RFI Shielding Backshell Non-Environmental Outer Shield Termination Series 70 Backshells provide EMI/RFI protection using ferrules to secure a cable s outer shield. They do not offer environmental

More information

Care, Use & Inspection Herc-Alloy 800 Chain...35 Herc-Alloy 800 Slings Herc-Alloy 800 Components Master Link...

Care, Use & Inspection Herc-Alloy 800 Chain...35 Herc-Alloy 800 Slings Herc-Alloy 800 Components Master Link... are, Use & Inspection....................... 34 Herc-lloy 800 hain.........................35 Herc-lloy 800 Slings......................36-37 Herc-lloy 800 omponents................38-39 Master Link................................40

More information

Micro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector

Micro-D MWDM-CBS Vertical Board Mount Printed Circuit Board Connector Micro-D PB Micro-D MWDM-BS Printed ircuit Board onnector High Performance These connectors feature gold-plated TwistPin contacts for best performance. P tails are.020 inch diameter. Specify nickel-plated

More information

ALUMINUM PUNKAH LOUVER

ALUMINUM PUNKAH LOUVER LUMINUM PUNK LOUVER 1/2" O.D. D -1/16" 3/16" Mounting ole Gasket - lear nodized - eavy Gauge luminum onstruction - White Powder oat - Stainless Steel ardware - Gloss lack Powder oat - Foam Gasket - Flat

More information

Glenair Environmental and Hermetic MIL-DTL Type Bulkhead Feed-Thrus

Glenair Environmental and Hermetic MIL-DTL Type Bulkhead Feed-Thrus lenair Environmental and Hermetic MIL-DTL-38999 Type ulkhead eed-thrus SETION E TALE O ONTENTS LENAIR MIL-DTL-38999 TYPE ULKHEAD EED-THRUS: MIL-DTL-38999 Type ulkhead eed-thru Product eatures...e-1 231-103-H7

More information

Amphenol Industrial Threaded AIT

Amphenol Industrial Threaded AIT mphenol Industrial Threaded IT IT Series is a low cost, MILDTL5015 threaded type connector for use in harsh environmental conditions. This popular, cylindrical connector is particularly well suited to

More information

MIL-DTL Series III Connectors

MIL-DTL Series III Connectors RELIABLE Self-locking threaded coupling 100% scoop proof Contact retention system provides excellent contact retention under severe vibration EMI PROTECTED Grounding fingers for excellent EMI protection

More information

D X X - XX - XX - X X

D X X - XX - XX - X X CONSTRUCTION MATERIAL FINISH Shell Alluminium Alloy Cadmium Olive Drab over Electroless Nickle Electroless Nickle Insert Engineering Plastic Natural O-ring Silicone Rubber Natural Contact Retainer Beryllium

More information

MIL-DTL-83723, Series III, Matrix

MIL-DTL-83723, Series III, Matrix MIL-DTL-, Series III, TBLE OF CONTENTS FOR SECTION MIL-DTL-, SERIES III, MTRIX Wide Variety of Coupling Styles & Options... Class Descriptions, Performance Specifications, Quick Reference Chart.... Insert

More information

MIL-C Circular Connectors

MIL-C Circular Connectors MIL-C-28840 Circular Connectors A high density, harsh environment connector designed to meet the most demanding environmental conditions and RFI/EMI shielding requirements. Delphi Connection Systems delivers

More information

SCE. Snatch Connector Electrical Series

SCE. Snatch Connector Electrical Series SCE Snatch Connector Electrical Series SCE is a miniature product with a silent push to mate and pull to release design across two styles of cable receptacles. All inserts and contacts are moulded in place,

More information

P Straight PCB Panel Mount Receptacle

P Straight PCB Panel Mount Receptacle How To Order PCB Panel Mount Receptacle HOW TO ORDER Sample Part Number J-25P2 M P A Part Number PIN CONTACTS WITH STRAIGHT PCB TERMINATION connectors are designed for rear-panel mounting and are supplied

More information

MIL-DTL Series IV Connectors

MIL-DTL Series IV Connectors DEPENDABLE Secure breech lock coupling 100% scoop-proof Pin-to-pin mating protection helps prevent failures RUGGED Mated connectors help withstand high-impact shock Rear accessory threads help provide

More information

DSUBMINIATURE CONNECTOR J SERIES

DSUBMINIATURE CONNECTOR J SERIES D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping

More information

WHEN YOU NEED THE BEST IN 5015 CONNECTORS

WHEN YOU NEED THE BEST IN 5015 CONNECTORS WHEN YOU NEED THE BET IN 5015 CONNECTO 702-802-2555 www.crownconnector.com TBE OF CONTENT 5015 Connectors...................................... 2 everse Bayonet Connectors.......................... 12

More information

MIL-DTL Series 1 Solder Type PT

MIL-DTL Series 1 Solder Type PT MIL-DTL-26482 Series 1 Solder Type PT The Amphenol Miniature Cylindrical Connector Series offers high density contact arrangements in a miniature, circular metal shell. This connector is environmentally

More information

AS85049/88/89/90 SERIES

AS85049/88/89/90 SERIES AS85049/88/89/90 SERIES EMI/RFI Composite Backshells MIL-DTL Specification EMI/RFI Composite Backshells Overview Features & Benefits QPL AS85049, D38999 & MS Qualified SUNBANK offers a wide range of qualified

More information

IPT SE and IPT Series

IPT SE and IPT Series IPT S and IPT (MI-T-26482 Serie I) and Tools IPT S and IPT Series and Tools Section 3057- able lamp / 3057- able lamp -2 ; -3 34 and 34- Neoprene Sleeve -4 IPT 3180- and IPT 3180-F Protective Plug overs

More information

HT STRAIGHT ADAPTER, WRENCH FLATS ( )

HT STRAIGHT ADAPTER, WRENCH FLATS ( ) HT7006 - STRAIGHT ADAPTER, WRENCH FLATS (12387118) MIL-DTL-38999 SERIES III; MIL-DTL-38999 SERIES IV HT7 0 06-11 - 6-8 SERIES ADAPTER ANGLE STRAIGHT - 0 CONNECTOR SERIES (INTERFACE) FINISH 8 - ELECTROLESS

More information

Miscellaneous Fittings

Miscellaneous Fittings B214 R&L REEL RCK SUPPORT FOR (32) PIPE 200 Lbs. (90.7 kg) B514 R&L REEL RCK SUPPORT FOR 2 (50) PIPE 246 Lbs. (111.6 kg) 3 5 /8 (92.1) 3 5 /8 (92.1) B214R Right Hand B214L Left Hand B514R Right Hand B514L

More information

Direct grounding from PCB to shell Avoid the risk of breaking contact tails High resistance to vibration & shock Time saving & easy assembling

Direct grounding from PCB to shell Avoid the risk of breaking contact tails High resistance to vibration & shock Time saving & easy assembling Direct grounding from PCB to shell void the risk of breaking contact tails High resistance to vibration & shock ime saving & easy assembling Prevent echanical tress on the older Joint 50151 EIE I ODEING

More information

The CL Series of heavy duty connectors is ideal. CL Series. Ruggedized High-Power Connectors. CL Series At a Glance. milnec.com

The CL Series of heavy duty connectors is ideal. CL Series. Ruggedized High-Power Connectors. CL Series At a Glance. milnec.com Series t a lance Series Ruggedized High-Power Connectors The Series of heavy duty connectors is ideal for rugged industrial or military applications that demand high-power delivery. Standardized parts

More information

POLAMCO HIGH POWER CONNECTORS STYLE

POLAMCO HIGH POWER CONNECTORS STYLE POLAMCO HIGH POWER CONNECTORS 38999 STYLE Robust & reliable connectors designed for harsh environments Contents Part Description System... 4 Materials... 4 Plating Options... 5 SECTION ONE: Plugs 1.1 Shielded

More information

06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING

06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024S - STRAIGHT SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING 06xx024Y - ONE PIECE SHRINK BOOT ADAPTER, NON-DETENT SELF LOCKING LENGTH STYLE Y SPECIFICATION: WHEN THE DESIRED ADAPTER S C DIAMETER IS

More information

High Density Interconnects

High Density Interconnects Contents ection Description Pages Insert rrangement 40 How To Order HD38999 4 Contact and Technical Data 42 Receptacles Wall ount Receptacle 43 Wall ount Double Flange Receptacle 43 Line Receptacle 44

More information

Mil-Spec Backshells and Connector Accessories

Mil-Spec Backshells and Connector Accessories Mil-Spec ackshells and onnector ccessories U n i t e d S t a t e s U n i t e d K i n g d o m e r m a n y r a n c e N o r d i c I t a l y S p a i n n Important Notice for ll uyers of Military Standard ylindrical

More information

BRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2

BRANCHE CONNECTEURS AEROMILITAIRES. AFD series Norme MIL-C G. Series 2 RN ONNTUR ROMIITIR series Norme MI- 26482 eries 2 ummary Introduction 1 dvantage 2 Technical characteristics 3 art-numbering system 4 tandard equivalence 5 ynoptic 6 rrangements 8 Receptacles 10 lugs 14

More information

VG95351 and VG96934 Qualified Connectors VG96934 TEN PIN CONNECTORS AND ACCESSORIES

VG95351 and VG96934 Qualified Connectors VG96934 TEN PIN CONNECTORS AND ACCESSORIES V95351 and V96934 Qualified onnectors Series onnectors V96934 TN PIN ONNTORS N SSORIS V96934 STYL ONIURTION SRIPTION P STYL able plug with two piece shielded backshell Page 30 STYL lange mount receptacle

More information

STAKE BODY Swing-Away Mount

STAKE BODY Swing-Away Mount STKE BODY Swing-way Mount for the Model 8160 Installation Instructions 720713 2006 Little Wonder, Inc. ll Rights Reserved. Table of Contents ssembly Instructions.......................2 Parts & Hardware

More information

W Electrical Connector Subsea / Underwater / Marine

W Electrical Connector Subsea / Underwater / Marine www.re-marine.com W Electrical onnector Subsea / Underwater / Marine The most common applications: ROV ive ell onnectors Underwater ameras and Lights Underwater Thruster Strain Termination Key eature:

More information

CHO-SHRINK Military/Aerospace Conductive Heat Shrinkable EMI Cable Shielding System. Customer Value Proposition.

CHO-SHRINK Military/Aerospace Conductive Heat Shrinkable EMI Cable Shielding System. Customer Value Proposition. Military/erospace onductive eat Shrinkable MI able Shielding System O-BOND dhesive/sealant O-SRINK 90 Boot (onductive Side) O-BOND dhesive/sealant O-SRINK 1061 Tubing onnector Boots able Transitions Boot

More information

OCS (Oval Contact System) Connectors

OCS (Oval Contact System) Connectors offers the High Perfmance Interconnect Solution f your High Speed Needs. The OCS* (Oval Contact System) is the newest 38999 Interconnect Product offering that provides many advantages f high speed data

More information

TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer.

TABLE OF CONTENTS. Amphenol Aerospace is a Certified ISO 9001 Manufacturer. This catalog covers the Amphenol /Matrix MIL-C- 83723, Series III Connectors. These connectors incorporate crimp rear release contacts. There is great diversity within this cylindrical family, with the

More information

S Rear Panel Float Mount Plugs

S Rear Panel Float Mount Plugs How To Order Series 79 HOW TO ORDR Sample Part Number H-66 M N Part Number Rear Panel Float Mount Plugs SOCKT CONTCTS WITH CRIMP TRMINTION connectors are equipped with rear-panel float mounting assemblies

More information

Shell material Insulator Contacts Sealing Temperature Mating Protection

Shell material Insulator Contacts Sealing Temperature Mating Protection Technical Data Shell material Machined components: die cast components: Shell plating: Cable entry: Copper-Zinc alloy (CuZn) Zinc (GD-Zn) Nickel (Ni) plated max. 10 mm Insulator Connector inserts: Polyamid

More information

38999 All In One! Series III Integrated Backshell

38999 All In One! Series III Integrated Backshell 38999 Series III Integrated Backshell 38999 All In One! Plug with integrated backshell: all the features and the benefits of 38999 Series III connectors now ready to use. Embedded backshell EMI backshell

More information

Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments

Amphenol. Amphenol /Matrix MIL-C-83723, Series III Connectors. Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol /Matrix MIL-C-, Series III Connectors -0- Bayonet, Threaded or Quick-Disconnect Coupling Connectors for Demanding Environments Amphenol This catalog covers the Amphenol /Matrix MIL-C-, Series

More information

8D Series D38999 Stainless Steel Series

8D Series D38999 Stainless Steel Series Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle

More information

MIL-C Series 4 PART NUMBER CONSTRUCTION

MIL-C Series 4 PART NUMBER CONSTRUCTION MIL-C-38999 - eries 4 PART NUMBR CONTRUCTION D38999 / 40 W F 35 P N Alternative Orientation Contact Type Insert Configuration Class tyle Military Prefix COD HLL TYL COD HLL IZ / 40 Wall Mount Receptacle

More information

VG95351E7. O-Ring for use with Style B flange mount connector Glenair, Inc. CAGE Code Printed in U.S.A.

VG95351E7. O-Ring for use with Style B flange mount connector Glenair, Inc. CAGE Code Printed in U.S.A. Series onnectors V95351 and V96934 Qualified onnectors V95351 and V96934 Qualified Products bout The V Specifications The erman ederal Office of efense Technology and Procurement (W) establishes procurement

More information

µcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors

µcom-10gb + Harsh Environment 10Gb Ethernet Micro Connectors Harsh Environment 10Gb Ethernet Micro onnectors 15mm Description µom-series is a new range of connectors designed to address the latest trends of the industry : miniaturization and high speed, with the

More information

WILDCAT CONNECTORS

WILDCAT CONNECTORS UTSCH WILCAT 38999 CONNCTORS Higher contact densities in a familiar MIL-TL-38999 form factor AROSPAC, FNS & MARIN /// UTSCH WILCAT 38999 CONNCTORS 60 0 80 36 65 88 5 5 8 0 90 70 UTSCH WILCAT 38999 CONNCTORS

More information

Rack & Panel Rectangular Miniature Subminiature Environmental Removable Contacts

Rack & Panel Rectangular Miniature Subminiature Environmental Removable Contacts Rack & Panel Rectangular Miniature Subminiature Environmental Removable ontacts Table Of ontents Series Description Page MR Miniature Rectangular onnectors With Removable ontacts 2-10 X External Miniature

More information

D-SUB SERIES. Lightweight backshells 3401/072 MATERIALS AND FINISHES. Features and Benefits. Typical Applications. Specification.

D-SUB SERIES. Lightweight backshells 3401/072 MATERIALS AND FINISHES. Features and Benefits. Typical Applications. Specification. -SU SERIES Lightweight backshells 3401/072 Features and enefits ompliant with ES specifications 3401/072 Ultra-light weight Solid fully machined aluminium alloy material Non magnetic EMI pplication Typical

More information

Cable Ties. Nylon Cable Ties

Cable Ties. Nylon Cable Ties able Ties Nylon able Ties ELETRIL SUPPLIES all us 718.361.2300 or Fax 718.937.5671 Wire Terminals Terminals ELETRIL SUPPLIES all us 718.361.2300 or Fax 718.937.5671 Plugs, onnectors and Receptacles Turn-Lock

More information

NFF QualiFied CoNNeCtors ith series Easy-to-assEmbly, Rigid insert PowER and signal REliablE REvERsE bayonet CouPling ConnECtoRs June 2013

NFF QualiFied CoNNeCtors ith series Easy-to-assEmbly, Rigid insert PowER and signal REliablE REvERsE bayonet CouPling ConnECtoRs June 2013 NF F 61030 Qualified C onn ec to r s ith series Easy-to-AssemblY, Power and Signal Reliable Reverse Bayonet Coupling June 2013 High Voltage Electrical Power Distribution From 0 to 60 in 3.9 Seconds High

More information

A B C D E F G H J K L M N

A B C D E F G H J K L M N icro- icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated

More information

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS

THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS MILITARY AND COMMERCIAL AVIATION MIL - DTL - 83723 SERIES III THREADED & BAYONET CONNECTORS FOR DEMANDING ENVIRONMENTS CONNECTORS FOR DEMANDING ENVIRONMENTS THREADED AND BAYONET MILITARY AND COMMERCIAL

More information

ITT Cannon KJL Series MIL-DTL Series I Connectors

ITT Cannon KJL Series MIL-DTL Series I Connectors APPLICATIONS FEATURES ITT Cannon KJL Series MIL-DTL-38999 Series I Connectors High performance military aircraft Commercial airlines Communications equipment Armored personnel carriers & tanks QUICK-MATING

More information

Anodized Aluminum Manifolds

Anodized Aluminum Manifolds nodized luminum Manifolds These manifolds can t rust, they resist corrosion and cost less! Made from heavy-wall aluminum extrusions, tested to 120 psi. Standard manifolds have 1" or 1¹ ₂" process water

More information

MIL-DTL SERIES III CONNECTORS RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS

MIL-DTL SERIES III CONNECTORS RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS QUICK REFERENCE GUIDE Wide Range Mil spec, commercial, and composite Full line of finishes, including black zinc nickel and PTFE nickel High Performance Environmentally sealed DEUTSCH MIL-DTL-38999 SERIES

More information

SUPPLEMENTAL RESTRAINT SYSTEM AIRBAG SYSTEM

SUPPLEMENTAL RESTRAINT SYSTEM AIRBAG SYSTEM SUPPLEMENTL RESTRINT SYSTEM IRG SYSTEM 191 DT 1815/54 DT 1816/54 DT 1817/54 DT 1818/54 Short in Front Passenger Side Squib 2nd Step ircuit Open in Front Passenger Side Squib 2nd Step ircuit Short to GND

More information

Cannon D-Subminiature Accessories

Cannon D-Subminiature Accessories annon -Subminiature ccessories annon -Subminiature ccessories Selection Guide Locking Hardware Sliding Lock emale Screw Lock Male Screw Lock Retainer Slide Lock Post Spring Latch Plate Spring Latch ackshell

More information

ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED

ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED DEUTSCH ACT AND DTS SERIES CONNECTORS EN3645 SPECIFICATION QUALIFIED Reliable and Versatile Range of Connectors for Harsh Environment Aerospace and Military Applications CONTENTS Introduction 03 Technical

More information

Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors

Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors Amphenol /Matrix MS/Standard MIL-C-5015 Cylindrical Connectors 12-026-2 Crimped Rear Release Qualified for Environmental and Firewall Applications Amphenol This catalog covers the Amphenol /Matrix MIL-C-

More information

Accessories for Inductive Sensors

Accessories for Inductive Sensors ontents ccessories for inductive Pulse stretching 739 Sensor tester, testing and setting device 71 switching devices 73 ssembly aids for Uni and 7 coverings for 77 7 70 72 Banking screw actuators 7 ushioned

More information

- - Introduction. Specifications

- - Introduction. Specifications 14 SERIES Introduction Amphenol 14 series connectors are water resistant, polarised, five and six contact electrical connectors for use in low voltage audio frequency circuits and applications. They employ

More information

Connect - Contact - Control. Circular Audio Miniature Connectors Series NF07 Series NF10 12,5 Ø max. max. cable diameter.

Connect - Contact - Control. Circular Audio Miniature Connectors Series NF07 Series NF10 12,5 Ø max. max. cable diameter. Connect - Contact - Control Ø Ø6 Ø9 Circular Audio Miniature Connectors Series NF07 Series NF0,5 Ø3. max. cable diameter 39.5 max. 4.5 A 58 e Connectors for audio technology: Series NF07 and NF0 Our well-proven

More information

Features and Application

Features and Application MIL-DTL-38999 Features and Application Series II Features and Application MIL-DTL-38999 Series II connectors feature a bayonet coupling mechanism with lower profile design and rear-removable crimp contact

More information

Amphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB

Amphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB ccessories ontact Terminating Tools For ML-TL- onnectors mphenol erospace ontact nsertion Tools ontact mphenol/ nsertion Tool Mil. olor ode nsertion Tool Replacement Tip & Pin mphenol/ Mil. 20 ZZL-R-9510--20

More information