Industrial Connectivity and Control Products Index. Section G

Transcription

1 Section G Industrial onnectivity and ontrol Products Type Page Number Mini-Quick ontrol onnectors G-2 Features and enefits G Pole Plugs G Pole Receptacles G Pole Plugs G Pole Receptacles G oil ord G-12 LED ables G-13 Field ttachable onnectors - ID style G-14 Micro-Quick ontrol onnectors G-1 Features and enefits G-16 Single Key 3- Pole Plugs G Single Key 3- Pole Receptacles G Dual Key 2-6 Pole Plugs G Dual Key 2-6 Pole Receptacles G Inverse Key 3-4 Pole Plugs and Receptacles G-2 26 oil ord G-27 LED ables G-28 Field ttachable onnectors - Screw Terminal/ID style G Nano-Quick ontrol onnectors G-31 Features and enefits G Pole Plugs and Receptacles G Field ttachable onnectors G-3 SignalPlex Micro Ports G-36 Features and enefits G-37 4-Port Enclosure G Port Enclosure G Port Enclosure G ccessories and Specifications G-44 4 SignalPlex Mini Ports G-46 Features and enefits G-47 4-Port Enclosures G-48 6-Port Enclosures G-49 8-Port Enclosures G-0 Wiring Schematics G-1 Signal-Quick Sensor Mounting ccessories G-2 ushioned Sensor Mounts G-3 Modular Mounting omponents G-4 djustable rackets and Sensor Quick Mounts G-6 7 Solid State Limit Switches G-8 9 Stop Screws and Proximity Probes G-60 Protective aps G-61 End aps and eramic Faces G-62 lock Mounts G-63 Universal iming rackets G-64 Well Mounts G-6 Sight Glass Mounts and onduit dapters G-66 abletrak Hose and able arrier System G-67 ssembly and Installation, Ordering Information G ccessories, Mounting Options and Specifications G DIN Rail Utility ox G-72 OEM Surge Protection G-73 Industrial Ethernet Harsh Environment onnectivity G-74 7 ccessories G-76 Industrial onnectivity and ontrol Products Index

2 Mini-Quick ontrol onnectors Mini-Quick ontrol onnectors Mini-Quick ontrol onnectors Mini-Quick ontrol onnectors are a line of environmentally protected, industrial circular connectors typically used for the installation and quick disconnect of solenoid valves, photo eyes, limit switches and 18 and 30 mm proximity switches. The electrical and environmental ratings of Mini- Quick connectors also make them well suited for use with outdoor lighting as well as other commercial applications requiring circular disconnect cable assemblies. Hubbell s Mini-Quick line features: UL Listed connectors with UL Type 4, 4X,12 and 13 environmental ratings. Nickel plated brass coupling nuts designed with an anti-vibration feature provide a secure connection that is resistant to corrosion and water. Gold over palladium nickel contact plating for superior conductivity and extended contact life. Sleeved, leaded nickel copper socket contacts maintain their shape and continuity over time. This highly durable line of connectors ensures extended product life resulting in decreased downtime and labor costs. Hubbell offers you a complete Mini-Quick product line with straight and right angle molded-on plugs and pre-wired receptacles available in 2 through 12 pole configurations with a variety of cable types and lengths. If you know the product you need, save time and go directly to the Mini- Quick Hubbell Logic ordering chart to build your catalog number. Hubbell will provide the product you want, when you need it. G-2

3 Mini-Quick ontrol onnectors Features and enefits Gated Strain Relief with Graduated Window Sizes- Improved flexibility and strength protects wire terminations; Superior arc of bend control. Hard Gold Over Palladium Nickel ontact Plating- Superior conductivity, extended contact life. O-Rings- Moisture protection. nti-vibration oupling Nut- Prevents coupling nut from loosening under harsh vibration conditions. Indicator Ring- Ensures proper mating. Leaded Nickel opper Sleeved ontact- Extended contact life and continuity. Features Nickel plated brass coupling nuts and receptacle shells. lack overmold and cable. Insulgrip connector body design. UL Listed cable assemblies and receptacles. Material Specifications Insulator Materials ontact Materials ontact Plating Overmold Material oupling Nut, Metallic oupling Nut, Nylon Receptacle Shell Receptacle Shell, Nylon Receptacle Shell, Right ngle ertifications UL 2238 and UL0, File No. E S ertified, 22.2 No and S 22.2 No. 94. Nylon 6/6, White Pins - rass, Sockets Leaded nickel copper w/ stainless steel sleeve Hard gold over palladium/nickel Polyurethane, lack Nickel plated brass Nylon 6/6, lack Nickel plated brass Nylon 6/6, lack Nickel plated zinc alloy die cast Electrical Specifications Voltage Rating 600VD/600V. mperage #16 WG - 2&3P=1, 4P=12, &6P=10 7P=10, 8&9P=9, 10&12P=8 #18 WG - 2&3P=11, 4P=8, &6P=7 ontact Resistance mω Isolation Resistance 1000 MΩ enefits Plating resistes corrosion in high abuse environments able assembly resists dirt and blends with environment giving a clean look to the installation Ergonomic connector body has an industrial look. Third party certified for electrical, mechanical and environmental performance. able Strain Relief #16 WG STOOW - PV jacket, lack, PV conductor insulation, Stranding - 6/34 #16 WG SEOOW - TPE jacket, lack, PV conductor insulation, Stranding - 6/34 #18 WG STOOW - PV jacket, lack, PV conductor insulation, Stranding - 41/34 #18 WM PV jacket, lack, PV conductor insulation, Stranding - 41/34 #16 WG & #18 WG - 30 pounds min per UL2238 Environmental Specifications Moisture Protection UL Type 4, 4X, 12 and 13. Ingress Protection IP67. Operating Temperature STOOW & WM2661 cables: -20 to 10. SEOOW cable: -40 to 10. orrosion Resistance 00 hours salt spray per MIL-STD-1344, Method Vibration Resistance 10-2,000 per MIL-STD-1344, Method 200. G-3 Mini-Quick ontrol onnectors Features and enefits

4 Mini-Quick ontrol onnectors Mini-Quick ontrol onnectors 2-6 Pole Plugs hoose the appropriate configuration from the Selector below. Hubbell Logic onfigurator For example, atalog Number HM0212 is derived as follows: DEVIE TYPE H= Plug, Female HP = Plug, Male HI = Plug, Male Inline* HE = Male/Female Extension able* HJ = Male/Female Jumper able OUPLING NUT MTERIL M = Metallic N = Nylon ODY STYLE = Right ngle S = Straight POLES ONDUTOR TYPE 1 = #16 WG STOOW able 2 = #16 WG SEOOW able 3 = #18 WM2661 IE able 4 = #18 WG STOOW able 3 - pole only H M 0 2 vailability of specific items may vary. onsult factory for delivery. onsult the factory for additional cable lengths or cable types. * vailable with metallic coupling nut only. LE LENGTH (ft) ** ** Replace w / length Pole Plugs atalog numbers using #16 WG STOOW cable are listed below. For #16 WG SEOOW, #18 WG STOOW or #18 WM2661 IE cable, change the conductor type per the Hubbell Logic chart above. 2-6 Pole Plugs Poles Male Face Shown Female - mirror image Male/Female Female Plugs Male Plugs Jumper ables able Length Straight Right ngle Straight Right ngle Straight 3 ft (0.91m) HMS02103 HM02103 HPMS02103 HPM02103 HJMS ft (1.83m) HMS02106 HM02106 HPMS02106 HPM02106 HJMS ft (3.66m) HMS02112 HM02112 HPMS02112 HPM02112 HJMS02112 ll other lengths HMS021** HM021** HPMS021** HPM021** HJMS021** 3 ft (0.91m) HMS03103 HM03103 HPMS03103 HPM03103 HJMS ft (1.83m) HMS03106 HM03106 HPMS03106 HPM03106 HJMS ft (3.66m) HMS03112 HM03112 HPMS03112 HPM03112 HJMS03112 ll other lengths HMS031** HM031** HPMS031** HPM031** HJMS031** 3 ft (0.91m) HMS04103 HM04103 HPMS04103 HPM04103 HJMS ft (1.83m) HMS04106 HM04106 HPMS04106 HPM04106 HJMS ft (3.66m) HMS04112 HM04112 HPMS04112 HPM04112 HJMS04112 ll other lengths HMS041** HM041** HPMS041** HPM041** HJMS041** 3 ft (0.91m) HMS0103 HM0103 HPMS0103 HPM0103 HJMS ft (1.83m) HMS0106 HM0106 HPMS0106 HPM0106 HJMS ft/3.66m) HMS0112 HM0112 HPMS0112 HPM0112 HJMS0112 ll other lengths HMS01** HM01** HPMS01** HPM01** HJMS01** 3 ft/0.91m) HMS06103 HM06103 HPMS06103 HPM06103 HJMS ft/1.83m) HMS06106 HM06106 HPMS06106 HPM06106 HJMS ft/3.66m) HMS06112 HM06112 HPMS06112 HPM06112 HJMS06112 ll other lengths HMS061** HM061** HPMS061** HPM061** HJMS061** Replace ** with length required in feet. For nylon coupling nuts, replace M with N per the ordering chart above. Example: change HPM0106 to HPN0106. G-4

5 Mini-Quick ontrol onnectors 2-6 Pole Plugs 7/8-16 UN Description dapter Ring Straight Plug Jumper able atalog No. HMQR1 MLE FEMLE 0.99 (2.2) 0.99 (2.2) 2.44 (62.0) 2.40 (61.0) 2.7 (69.9) 2.7 (69.9) ESSORIES losure caps protect plugs and receptacles when not in use. dapter rings allow the mating of male and female plugs for in-line applications. Shell size is 1, and the thread is 7/8-16 UN. 7/8-16 UN Right ngle Plug MLE FEMLE 0.99 (2.2) 0.99 (2.2) 2.14 (4.4) 2.14 (4.4) 2.7 (69.9) 2.7 (69.9) D 1.03 (26.2) 1.03 (26.2) E 1.64 (40.6) 1.60 (40.6) able Diameters y able Type 7/8-16 UN 7/8-16 UN Number of #16 WG #18 WG onductors STOOW STOOW MLE FEMLE (9.4) 0.37 (9.4) 0.99 (2.2) 0.99 (2.2) (10.7) 0.37 (9.4) 2.44 (62.0) 2.40 (61.0) (10.7) 0.42 (10.7) 0.0 (12.7) 0.0 (12.7) (13.2) 0.0 (12.7) losure ap losure ap 7/8-16 UN Inline Plug HPP1 HRP1 MLE 0.99 (2.2) 2.47 (62.8) 2.7 (69.9) Right ngle version also available. Male/Female Extension able 7/8-16 UN MLE FEMLE 0.99 (2.2) 0.99 (2.2) 2.47 (62.7) 2.40 (61.0) 7/8-16 UN Number of onductors #16 WG SEOOW #18 WM2661 IE (10.7) 0.26 (6.6) (10.7) 0.26 (6.6) 0.0 (12.7) 0.26 (6.6) onductor olor ode #16 WG STOOW Plugs ontact Number Pole Pole Pole Pole Pole 1 White Green lack White White 2 lack lack White Red Red 3 White Red Green Green 4 Green Orange Orange lack lack 6 lue #16 WG SEOOW Plugs ontact 3 4 Number Pole Pole Pole 1 Green Red/lack Red/White 2 Red/lack Red/White Red 3 Red/White Red Green 4 Green Red/Orange Red/lack #18 WG STOOW Plugs ontact 3 4 Number Pole Pole Pole 1 Green lack White 2 lack White Red 3 White Red Green 4 Green Orange lack #18 WG IE Plugs ontact 3 4 Number Pole Pole Pole 1 Yellow/Green lack lack 2 rown lue lue 3 lue rown Yellow/Green 4 White rown White Mini-Quick ontrol onnectors 2-6 Pole Plugs G-

6 Mini-Quick ontrol onnectors Mini-Quick ontrol onnectors 2-6 Pole Receptacles hoose the appropriate configuration from the selector below. Hubbell Logic onfigurator For example, catalog number HMS001 is derived as follows: DEVIE TYPE HR = Receptacle, Female H = Receptacle, Male SHELL MTERIL M = Metallic N = Nylon ODY STYLE = Right ngle S = Straight F = Flange Mount Metallic Only POLES ONDUTOR TYPE = #16 WG Discrete Wire 6 = #18 WG IE Discrete Wire (IE colors) 3 - Pole Only LED WIRE LENGTH (ft) 01* ** * 1 Standard Length ** Replace w / length H M S 0 vailability of specific items may vary. onsult factory for delivery. Use this chart to build receptacles to meet any application need. onsult the factory for additional wire lengths or wire types Pole Receptacles #16 WG Discrete Wire Poles Male Face Shown Female - mirror image Female Receptacle Male Receptacle Right Flange Right Flange Straight Nylon ngle Mount Straight Nylon ngle Mount 2 HRMS0201 HRNS0201 HRM0201 HRMF0201 HMS0201 HNS0201 HM0201 HMF HRMS0301 HRNS0301 HRM0301 HRMF0301 HMS0301 HNS0301 HM0301 HMF HRMS0401 HRNS0401 HRM0401 HRMF0401 HMS0401 HNS0401 HM0401 HMF0401 HRMS001 HRNS001 HRM001 HRMF001 HMS001 HNS001 HM001 HMF Pole Receptacles 6 HRMS0601 HRNS0601 HRM0601 HRMF0601 HMS0601 HNS0601 HM0601 HMF0601 For #18 WG IE discrete wire, change the conductor type using the Hubbell Logic chart above. G-6

7 Mini-Quick ontrol onnectors 2-6 Pole Receptacles 7/8-16 UN D 1 2 G Straight Receptacles D F 1/2" NPT * Max panel thickness Right ngle Receptacles MLE FEMLE 1.14 (29.0) 1.14 (29.0) 1.76 (44.7) 1.76 (44.7) 0.2 (6.4) 0.2 (6.4) D 12.0 (304.8) 12.0 (304.8) E 0.97 (24.6) 0.97 (24.6) F 0.83 (21.8) 0.83 (21.8) G 1.36 (34.) 1.36 (34.) H 1.26 (32.0) 1.26 (32.0) olor ode y Wire Type 1 2 Pan 7/8-16 UN E MLE FEMLE 1.14 (29.0) 1.14 (29.0) 1.11 (28.2) 1.11 (28.2) 0.44 (11.2) 0.44 (11.2) D 12.0 (304.8) 12.0 (304.8) F 0.88 (22.4) 0.83 (22.4) G 0.2 (6.4) 0.2 (6.4) *IE receptacle has PG13. rear thread. 1/2" NPT H #16 WG Receptacles ontact Number Pole Pole Pole Pole Pole 1 White Green lack White White 2 lack lack White Red Red 3 White Red Green Green 4 Green Orange Orange lack lack 6 lue #18 WG Receptacles ontact 3 4 Number Pole Pole Pole 1 Yellow/Green lack lack 2 rown lue lue 3 lue rown Yellow/Green 4 White rown White F G 7/8-16 UN ESSORIES Description Flange Mount Receptacles atalog No. MLE FEMLE 1.2 (31.7) 1.2 (31.7) 1.11 (28.19) 1.11 (28.19) 0.44 (11.18) 0.44 (11.18) D 12.0 (304.8) 12.0 (304.8) F 0.7 (19.0) 0.7 (19.0) G 0.86 (21.84) 0.86 (21.84) H 0.4 (11.43) 0.4 (11.43) I 0.12 (03.02) 0.12 (03.02) losure caps protect plugs and receptacles when not in use. Shell size is 1, and the thread is 7/8-16 UN. losure ap losure ap G H D HPP1 HRP1 G I F ll dimensions are shown in inches (mm) G-7 Mini-Quick ontrol onnectors 2-6 Pole Receptacles

8 Mini-Quick ontrol onnectors Mini-Quick ontrol onnectors 7-12 Pole Plugs hoose the appropriate configuration from the Selector below. Hubbell Logic onfigurator For example, atalog Number HM08112 is derived as follows: DEVIE TYPE H = Plug, Female HP = Plug, Male HJ = Jumper, Male/Female OUPLING NUT MTERIL M = Metallic N = Nylon ODY STYLE = Right ngle S = Straight POLES ONDUTOR TYPE 1 = #16 WG STOOW able LE LENGTH (ft) ** H M vailability of specific items may vary. onsult factory for delivery. onsult the factory for additional cable lengths or cable types Pole Plugs atalog numbers using #16 WG STOOW cable are listed below Pole Plugs Poles Male Face Shown Female - mirror image Male/Female Female Plugs Male Plugs Jumper ables able Length Straight Right ngle Straight Right ngle Straight 3 ft (0.91m) HMS07103 HM07103 HPMS07103 HPM07103 HJMS ft (1.83m) HMS07106 HM07106 HPMS07106 HPM07106 HJMS ft (3.66m) HMS07112 HM07112 HPMS07112 HPM07112 HJMS07112 ll other lengths HMS071** HM071** HPMS071** HPM071** HJMS071** 3 ft (0.91m) HMS08103 HM08103 HPMS08103 HPM08103 HJMS ft (1.83m) HMS08106 HM08106 HPMS08106 HPM08106 HJMS ft (3.66m) HMS08112 HM08112 HPMS08112 HPM08112 HJMS08112 ll other lengths HMS081** HM081** HPMS081** HPM081** HJMS081** 3 ft (0.91m) HMS09103 HM09103 HPMS09103 HPM09103 HJMS ft (1.83m) HMS09106 HM09106 HPMS09106 HPM09106 HJMS ft (3.66m) HMS09112 HM09112 HPMS09112 HPM09112 HJMS09112 ll other lengths HMS091** HM091** HPMS091** HPM091** HJMS091** 3 ft (0.91m) HMS10103 HM10103 HPMS10103 HPM10103 HJMS ft (1.83m) HMS10106 HM10106 HPMS10106 HPM10106 HJMS ft/3.66m) HMS10112 HM10112 HPMS10112 HPM10112 HJMS10112 ll other lengths HMS101** HM101** HPMS101** HPM101** HJMS101** 3 ft/0.91m) HMS12103 HM12103 HPMS12103 HPM12103 HJMS ft/1.83m) HMS12106 HM12106 HPMS12106 HPM12106 HJMS ft/3.66m) HMS12112 HM12112 HPMS12112 HPM12112 HJMS12112 ll other lengths HMS121** HM121** HPMS121** HPM121** HJMS121** Replace ** with length required in feet. For nylon coupling nuts, replace M with N per the ordering chart above. Example: change HPM07106 to HPN G-8

9 Mini-Quick ontrol onnectors 7-12 Pole Plugs Number of onductors Straight Plug MLE FEMLE 1.12 (28.) 1.12 (28.) 2.3 (64.3) 2.49 (63.3) 1-16 UN #16 WG STOOW (14.) (14.) (16.7) (16.7) (17.9) Description 7 to 8 Pole 9 to 12 Pole D MLE FEMLE 1.12 (28.) 1.12 (28.) 2.3 (64.3) 2.49 (63.3) 2.7 (69.9) 2.7 (69.9) D 1-16 UN MLE FEMLE 1.2 (31.8) 1.2 (31.8) 2.77 (70.4) 2.73 (69.3) 2.7 (69.9) 2.7 (69.9) D 1 1/8-16 UN Jumper able 7-8 Pole 9-12 Pole able Diameters y able Type ESSORIES Right ngle Plug ll dimensions are shown in inches (mm) onductor olor ode #16 WG STOOW Plugs ontact Number Pole Pole Pole Pole Pole Pole Pole Pole Pole Pole 1 White Green lack White White White/lack Orange Orange Orange Orange 2 lack lack White Red Red lack lue lue lue lue 3 White Red Green Green White White/lack Red/lack White/lack White/lack 4 Green Orange Orange Red lack Green/lack Red/lack Red/lack lack lack Orange White White Green/lack Green/lack 6 lue lue Red Red Orange/lack Orange/lack 7 Green Green Green Red lue/lack 8 Red/lack White/lack Green lack/white 9 lack lack Green 10 White Red 11 White 12 lack losure caps protect plugs and receptacles when not in use. dapter rings allow the mating of male and female plugs for in-line applications. ap Size 7-8 Pole 9-12 Pole MLE FEMLE 1.2 (31.8) 1.2 (31.8) 2.77 (70.4) 2.73 (69.3) 1 1/8-16 UN losure ap losure ap dapter Ring Shell atalog Shell atalog Shell atalog Size Size Number Size Size Number Size Size Number ll 1-16 UN HPP2 ll 1-16 UN HRP2 ll 1-16 UN HMQR2 lll 1 1/8-16UN HPP3 lll 1 1/8-16UN HRP3 lll 1 1/8-16UN HMQR3 II (28.), III- 1.2 (31.8) II (2.4), III (24.6) F E 7-8 Pole MLE FEMLE 1.14 (29.0) 1.14 (29.0) 1.73 (43.9) 1.69 (42.9) D 1.12 (28.) 1.12 (28.) D 2.22 (6.4) 2.22 (6.4) E 2.7 (69.9) 2.7 (69.9) F 1-16 UN 9-12 Pole MLE FEMLE 1.2 (31.8) 1.2 (31.8) 1.84 (47.0) 1.80 (4.7) 1.2 (31.8) 1.2 (31.8) D 2.4 (64.) 2.4 (64.) E 2.7 (69.9) 2.7 (69.9) F 1 1/8-16 UN Mini-Quick ontrol onnectors 7-12 Pole Plugs G-9

10 Mini-Quick ontrol onnectors Mini-Quick ontrol onnectors 7-12 Pole Receptacles hoose the appropriate configuration from the Selector below. Hubbell Logic onfigurator For example, atalog Number HRMS1001 is derived as follows: DEVIE TYPE HR = Receptacle, Female H = Receptacle, Male SHELL MTERIL M = Metallic ODY STYLE S = Straight POLES ONDUTOR TYPE = #16 WG Discrete Wire HR M S 10 vailability of specific items may vary. onsult factory for delivery. onsult the factory for additional wire lengths or wire types. LED WIRE LENGTH (ft) 01* ** * 1 Standard Length ** Replace w / length Pole Receptacles #16 WG Discrete Wire Poles Male Face Shown Female - mirror image Female Receptacle Male Receptacle 7 HRMS0701 HMS HRMS0801 HMS HRMS0901 HMS HRMS1001 HMS HRMS1201 HMS Pole Receptacles G-10

11 Mini-Quick ontrol onnectors 7-12 Pole Receptacles ll dimensions are shown in inches (mm) able Diameters y able Type Number of onductors #16 WG STOOW (14.) (14.) (16.7) (16.7) (18.0) ESSORIES Description 7 to 8 Pole 9 to 12 Pole Straight Receptacles H G D F 1/2" NPT Panel cuto Max panel thickness MLE FEMLE 1.29 (32.8) 1.29 (32.8) 1.44 (36.6) 1.44 (36.6) 0.80 (20.3) 0.80 (20.3) D 12.0 (304.8) 12.0 (304.8) F 0.83 (21.1) 0.83 (21.1) G 0.2 (6.4) 0.2 (6.4) H 1-16 UN MLE FEMLE 1.44 (36.6) 1.44 (36.6) 1.62 (41.2) 1.62 (41.2) 0.96 (24.4) 0.96 (24.4) D 12.0 (304.8) 12.0 (304.8) F 0.83 (21.1) 0.83 (21.1) G 0.2 (6.4) 0.2 (6.4) H 1 1/8-16 UN losure caps protect plugs and receptacles when not in use. dapter rings allow the mating of male and female plugs for in-line applications. ap Size 7-8 Pole onductor olor ode #16 WG STOOW Plugs ontact Number Pole Pole Pole Pole Pole Pole Pole Pole Pole Pole 1 White Green lack White White White/lack Orange Orange Orange Orange 2 lack lack White Red Red lack lue lue lue lue 3 White Red Green Green White White/lack Red/lack White/lack White/lack 4 Green Orange Orange Red lack Green/lack Red/lack Red/lack lack lack Orange White White Green/lack Green/lack 6 lue lue Red Red Orange/lack Orange/lack 7 Green Green Green Red lue/lack 8 Red/lack White/lack Green lack/white 9 lack lack Green 10 White Red 11 White 12 lack losure ap losure ap dapter Rings Shell atalog Shell atalog Shell atalog Size Size Number Size Size Number Size Size Number ll 1-16 UN HPP2 ll 1-16 UN HRP2 ll 1-16 UN HMQR2 lll 1 1/8-16UN HPP3 lll 1 1/8-16UN HRP3 lll 1 1/8-16UN HMQR3 II (28.), III- 1.2 (31.8) II (2.4), III (24.6) 9-12 Pole Mini-Quick ontrol onnectors 7-12 Pole Receptacles G-11

12 Mini-Quick ontrol onnectors Mini-Quick ontrol onnectors oil ord oil ord allows control connector plugs to extend and retract to pre-defined lengths, much like a mechanical spring. oil cords come standard with 18 WG polyurethane (PUR) jacketed cable. onsult factory for alternate construction. Simply choose the appropriate configuration from the selector below. Hubbell Logic onfigurator For example, atalog Number HEMS0304 is derived as follows: DEVIE TYPE HP= Plug, Male H= Plug, Female HJ = Male/Female Jumper HI = Plug, Male Inline* HE = Male/Female Extension* OUPLING NUT MTERIL M = Metallic N = Nylon ODY STYLE = Right ngle S = Straight POLES 03 = 3 04 = 4 0 = LE TYPE EXTENDED LENGTH (ft) ** 04 = 4.* 06 = 6 12 = = 20 * 04 = 4. feet ** Replace w / length HE M S 03 * vailable with metallic coupling nut only. 04 (Extended) (Retracted) " (12.4) onsult factory for availability. 2.7" (69.9) Material Specifications 18 WG PUR PUR jacket, black PV conductor insulation Stranding - 41/34 able Diameter Number of onductors Diameter (6.1) (6.6) 0.28 (7.1) oil ord olor odes Wire olor Wire olor Wire olor 1 Green 1 Red/lack 1 Red/White Red/lack 2 Red/White 3 2 Red Red White 3 Red 3 Green 4 Green 4 Red/Orange Red/lack Female face shown, Male- mirror image G-12

13 Mini-Quick ontrol onnectors LED ables LED Plugs Mini-Quick plugs are available in straight and right angle versions to aid in visibility of sensor functions in the manufacturing plant. These plugs are available in the 3-pole, 4-wire, 18WG configurations. The last two alpha numeric digits of each of catalog number gives the assembly length in feet. Electrical Rating: 6/300V Wiring Schematic ontact #3 ontact #2 ontact #1 Green Red Red/White Wire L1 Red Wire L2 Red/lack Wire Load Green Wire, Ground Mini-Quick ontrol onnectors Mini-Quick Right ngle Female LED Plugs atalog No. atalog No. Description Metallic Nylon 3-Pole/4-wire, 3 ft. HM03L03 HN03L03 3-Pole/4-wire, * ft. HM03L** HN03L** ** User-specified cable lengths. onductor olors ontact olor 1 Green - Ground 2 Red/lack - Load 3 Red/White - L1 4 Red -L (2.9) Red Lamp LED Plug Green Lamp Ø 0.99 (2.2) 7/8-16 UN 1.60 (40.6) 2.7 (69.9) Mini-Quick Straight Female LED Plugs atalog No. atalog No. Description Metallic Nylon 3-Pole/4-wire, 3 ft. HMS03L03 HNS03L03 3-Pole/4-wire, * ft. HMS03L** HNS03L** ** User-specified cable lengths. Ø 0.99 (2.2) 2.40 (61.0) Green Lamp 2.7 (69.9) onductor olors ontact olor 1 Green - Ground 2 Red/lack - Load 3 Red/White - L1 4 Red- - L2 7/8-16UN Red Lamp Mini-Quick LED Jumper ables atalog No. atalog No. Description Metallic Nylon 2 Right ngle HJM03L06 HJN03L06 R/ Male, Straight Female HJM03L06 HJN03L06 R/ Female, Straight Male HJM03L06 HJN03L (41.7) Ø 0.99 (2.2) Ø 0.99 (2.2) 7/8-16UN Male Plug LED Plug 1.60 (40.6) LED ables G-13

14 Mini-Quick ontrol onnectors Mini-Quick Field ttachable onnectors - Screw Terminal Style rass oupling Nut - Nickel Plated. Set Screw - Standard 1/16" Hex for Easy Terminations. Precision Wire Funnels - Eliminate Stray Strands. ody- High-impact Insulgrip Design. ircuit ID label. Superior ontact Design - Utilizing High Performance Material: Gold Over Palladium Nickel Plating. Patented Gotcha Ring - Strain Relief Design to Prevent Wire Damage. ody able Range Male Face Shown Female - mirror image Field ttachable onnectors 1.01" (2.7) 1.10" (27.9).20"-.27" (.1-6.9) HMS03F1 HMS04F1 HMS0F1 Straight.2"-.38" ( ) HMS03F2 HMS04F2 HMS0F2 Female.38"-.0" ( ) HMS03F3 HMS04F3 HMS0F3.20"-.27" (.1-6.9) HM03F1 HM04F1 HM0F1 Right ngle.2"-.31" ( ) HM03F2 HM04F2 HM0F2.2"-.31" ( ) HM03F3 HM04F3 HM0F3.14"-.27" (.1-6.9) HIMS03F1 HIMS04F1 HIMS0F1 Male Straight.2"-.38" ( ) HIMS03F2 HIMS04F2 HIMS0F2 In-Line.38"-.0" ( ) HIMS03F3 HIMS04F3 HIMS0F3.20"-.27" (.1-6.9) HIM03F1 HIM04F1 HIM0F1 Right ngle.2"-.38" ( ) HIM03F2 HIM04F2 HIM0F2.38"-.0" ( ) HIM03F3 HIM04F3 HIM0F3.20"-.27" (.1-6.9) HPMS03F1 HPMS04F1 HPMS0F1 Straight.2"-.38" ( ) HPMS03F2 HPMS04F2 HPMS0F2 Male.38"-.0" ( ) HPMS03F3 HPMS04F3 HPMS0F3.20"-.27" (.1-6.9) HPM03F1 HPM04F1 HPM0F1 Right ngle.2"-.38" ( ) HPM03F2 HPM04F2 HPM0F2.38"-.0" ( ) HPM03F3 HPM04F3 HPM0F3 2.34" (9.4) Female, Right ngle Male, Right ngle 2.42" (61.) F1= 1.99" (0.) 2.22" F2= (6.4) 2.82" F3= (71.6) 1.99" F1= (0.) 2.22" F2= (6.4) 2.82" F3= (71.6) Male In-Line, Right ngle 1.10" (27.9) F1= 3.09" (78.) F2= 3.64" (92.) F3= 3.46" (87.9) Female, Straight Male, Straight F1= 3.16" (90.3) F2= 3.3" (89.7) F3= 3.71" (94.2) 1.10" (27.9) Male In-Line, Straight Material Specifications Non-Metallic Materials PT, Nylon 6/6 ontact Materials Pins-rass, Sockets-Leaded nickel copper w/stainless steel sleeve ontact Plating Hard gold over palladium/nickel oupling Nut Nickel plated brass Gotcha -rings Nylon 6/6, Natural, yellow, blue and black ushings Rubber, lack Set Screw Zinc plated steel Electrical Specifications Voltage Rating 600V /D Wire Range 16WG max, 18 WG min. able Diameters F1= , F2= , F3= mperage #16 WG- 3p=1, 4p=12, p=10 #18 WG- 3p=11, 4p=8, p=7 ontact Resistance < mω Isolation Resistance 1000 MΩ Environmental Specifications Moisture Resistance UL Type 4, 4X, 12 and 13, IP67 Operating Temperature -20 to 10 orrosion Resistance 00 hours salt spray per MIL-STD-1344, Method 1001 Vibration Resistance 10-2,000 1g per MIL-STD-1344, Method 200 G-14

15 Micro-Quick ontrol onnectors Micro-Quick ontrol onnectors Micro-Quick ontrol onnectors Whether you have a need for an industrial connector for sensitive signal applications, or for connecting to photo eyes or to 12 and 18 mm proximity switches, Hubbell s Micro-Quick connector line is the best choice available today. Micro-Quick control connectors are made with the same high quality materials as the Mini-Quick line, resulting in the same industrial strength in a smaller package to fit your size, signal and wire gauge requirements. Hubbell s Micro-Quick line features: UL Listed connectors with UL Type 4, 4X,12 and 13 environmental ratings. eryllium copper socket contacts maintain continuity over time and reduce intermittencies. Gold over palladium nickel contact plating for superior conductivity and extended contact life. s you would expect from Hubbell, Micro-Quick control connectors are the most durable and longest lasting micro connector available on the market today. Give us your harshest environment and we will give you a Micro-Quick connector that stands up to the job. The Micro-Quick product offering is complete with straight and right angle molded on plugs and pre-wired receptacles available in 2 through 6 pole configurations with a variety of cable types and lengths. This line offers and D key styles to prevent mismating which can cause equipment damage. The Hubbell Logic chart helps you build the product you need quickly and easily. G-1

16 Micro-Quick ontrol onnectors Micro-Quick ontrol onnectors Features and enefits Hard Gold over Palladium/Nickel ontact Plating- High mating cycles and longer contact life ustom Knurled, nti-vibration oupling Nut- Prevents loosening under harsh vibration conditions Gated Strain Relief with Graduated Window Sizes- Distributes force away from contacts to protect terminations Indicator Ring- Ensures proper mating O-Rings- Moisture protection Resilient ase Metal- Maintains socket contact shape Features enefits Nickel plated brass coupling nuts and receptacle shells. Plating resists corrosion in high abuse environments. eryllium copper socket contacts. Strong, resilient base metal ensures contacts maintain their shape and continuity over time. Standard #22 WG cable 8% copper braid able resists nicks and abrasions and provides coverage. shielding when braid is terminated. lack overmold and cable. able assembly resists dirt and blends with environment giving a clean look to the installation. Insulgrip connector body design. Ergonomic connector body has an industrial look. Material Specifications Insulator Materials Nylon 6/6, White ontact Materials Pins - rass Sockets - eryllium copper ontact Plating Hard gold over palladium/nickel Overmold Material Glass filled polyurethane, lack oupling Nut, Metallic Nickel plated brass oupling Nut, Nylon Nylon 6/6, lack Receptacle Shell Nickel plated brass able #22 WG - PV jacket (black) PV conductor insulation opper braid - 8% coverage Stranding - 19/34 #18 WG - TPE jacket (black) PV conductor insulation Stranding - 41/34 Strain Relief #22 WG - 20 pounds min per UL2238 #18 WG - 30 pounds min per UL 2238 Features and enefits Electrical Specifications Voltage Rating 300VD/300V mperage #22 WG - 2&3P=, 4&P=4, 6P=3 #18 WG - 2&3P=8, 4P=6, P= ontact Resistance mω Isolation Resistance 1000 MΩ Environmental Specifications Moisture Protection UL Type 4, 4X, 12 and 13 Ingress Protection IP67 Suitability Operating Temperature #22 WG PV cable: -20 to 10 #18 WG TPE cable: -40 to 10 orrosion Resistance 00 hours salt spray per MIL-STD-1344, Method 1001 Vibration Resistance 10-2,000 per MIL-STD-1344, Method 200 ertifications UL 2238 and UL0, File No. E S ertified, 22.2 No and S 22.2 No. 94 G-16

17 Micro-Quick ontrol onnectors Single Key 3 - Pole Plugs hoose the appropriate configuration from the Selector below. Hubbell Logic onfigurator For example, atalog Number MMS1312 is derived as follows: DEVIE TYPE M= Plug, Female MI = Plug, Male Inline ME = Male/Female Extension able OUPLING NUT MTERIL M = Metallic N = Nylon ODY STYLE = Right ngle S = Straight KEY STYLE 1 = Single POLES 3 4 ONDUTOR TYPE 1 = #22 WG PV able 2 = #18 WG TPE able LE LENGTH (m) ** 2 4 Micro-Quick ontrol onnectors 2-4 pole only ** Replace w / length M M S vailability of specific items may vary. onsult factory for delivery. onsult the factory for additional cable lengths or cable types Pole Single Key Plugs atalog numbers using #22 WG PV cable are listed below. For #18 WG TPE cable, change the conductor type per the Hubbell Logic chart above. Poles 3 4 Male Face Shown Female - mirror image Male/Female Female Plugs Male In-Line Plugs Extension ables able Length Straight Right ngle Straight Right ngle 6.6 ft (2m) MMS1312 MM1312 MIMS1312 MEMS ft (4m) MMS1314 MM1314 MIMS1314 MEMS ft (m) MMS131 MM131 MIMS131 MEMS131 ll other lengths MMS131** MM131** MIMS131** MEMS131** 6.6 ft (2m) MMS1412 MM1412 MIMS1412 MEMS ft (4m) MMS1414 MM1414 MIMS1414 MEMS ft (m) MMS141 MM141 MIMS141 MEMS141 ll other lengths MMS141** MM141** MIMS141** MEMS141** 6.6 ft (2m) MMS112 MM112 MIMS112 MEMS ft (4m) MMS114 MM114 MIMS114 MEMS ft (m) MMS11 MM11 MIMS11 MEMS11 ll other lengths MMS11** MM11** MIMS11** MEMS11** Replace ** with length required in feet. For nylon coupling nuts, replace M with N per the ordering chart above. Example: change MM1412 to MN G-17 Single Key 3 - Pole Plugs

18 Micro-Quick ontrol onnectors Micro-Quick ontrol onnectors Single Key 3 - Pole Plugs Drawings (in/mm) Straight Female Plug 0.9 (1.0) 1.83 (46.) 2.7 (69.9) M12 x 1 Right ngle Female Plug D M12 x (1.0) 1.44 (36.6) 2.7 (69.9) D 0.67 (17.0) E 1.1 (29.2) E Right Male In-Line Plug D E M12 x (1.0) 1.44 (36.6) 2.7 (69.9) D 0.67 (17.0) E 1.38 (3.1) Straight Male In-Line Plug Extension able M12 x 1 MLE 0.9 (1.0) 2.06 (2.3) 2.7 (69.9) FEMLE MLE 0.9 (1.0) 0.9 (1.0) 1.83 (46.) 2.06 (2.3) 1/2-20 UNF Single Key 3 - Pole Plugs able Diameters y able Type Number of #22 WG #18 WG onductors PV TPE (.3) 0.24 (6.1) (.7) 0.26 (6.6) 0.26 (6.6) 0.28 (7.1) onductor olor ode ontact 3 4 Number Pole Pole Pole 1 rown rown rown 2 Not Used White White 3 lue lue lue 4 lack lack lack Not Used Not Used Gray ESSORIES Dust aps losure caps protect plugs and receptacles when not in use. is M12 x 1. atalog # MRM1 MPM1 G-18

19 Micro-Quick ontrol onnectors Single Key 3 - Pole Receptacles hoose the appropriate configuration from the Selector below. Hubbell Logic onfigurator For example, atalog Number MRMS13314 is derived as follows: DEVIE TYPE MR= Receptacle, Female M= Receptacle, Male MF = Receptacle, Female Inverse MR M S Pole Single Key Receptacles- #22 WG Discrete Wire OUPLING NUT MTERIL M = Metallic ODY STYLE S = Straight Male Receptacle Female Inverse Receptacles Rear Style Rear Style M14 x 1 1/2 NPT 1/4 NPT MMS13314 MMS1330 MFMS1332 MMS14314 MMS1430 MFMS1432 MMS1314 MMS130 MFMS132 POLES 3 4 vailability of specific items may vary. onsult factory for delivery. onsult the factory for additional cable lengths or cable types. 3 - Pole Single Key Receptacles KEY STYLE 1 = Single For 18 WG discrete wire, replace the conductor type per Hubbell Logic chart above. ll receptacles available in 1 ft. length standard. For additional lengths, please consult factory. ONDUTOR TYPE 3 = #22 WG PV DIscrete Wire 4 = #18 WG PV Discrete Wire 3-4 pole only RER THRED STYLE 14 = M14x1 * 2 = 1/4 NPT** 0 = 1/2 NPT* atalog numbers using #22 WG PV discrete wire are listed below. For #18 WG PV discrete wire, change the conductor type per the Hubbell Logic chart above. Poles 3 4 Male Face Shown Female - mirror image * M Style Only **MF Style Only 14 G-19 Micro-Quick ontrol onnectors 3 - Pole Single Key Receptacles

20 Micro-Quick ontrol onnectors Micro-Quick ontrol onnectors Single Key 3 - Pole Receptacles Male Receptacle Rear - M14x1 0.7 (19.1) 0.29 (7.4) 12 (304.8) Ø 0.63 (16) M12 x 1.00" (1.3) Max panel thickness M14 x 1 Ø 0.63 (16)Panel cutout Male Receptacle Rear - 1/2 NPT 1.0 (2.4) 0.46 (11.7) 12 (304.8) 1.0 (2.4) 0.87 (22.1).8 M12 x 1.24 (6.1) Max panel thickness ½" NPT Female Inverse Receptacle Rear - 1/4 NPT 0.86 (21.8) 0.40 (10.2) 12 (304.8) 0.7 (19.1) 0.62 (1.8) 0.6 M12 x 1.1 (3.8) Max panel thickness ¼" NPT onductor olor ode - Single Key ontact 3 4 Number Pole Pole Pole 1 rown rown rown 2 Not Used White White 3 lue lue lue 4 lack lack lack Not Used Not Used Gray ESSORIES Dust aps losure caps protect plugs and receptacles when not in use. is M12 x 1. atalog # MRM1 MPM1 Single Key 3- Pole Receptacles G-20

21 Micro-Quick ontrol onnectors Dual Key 2-6 Pole Plugs hoose the appropriate configuration from the Selector below. Hubbell Logic onfigurator For example, atalog Number MPMS212 is derived as follows: DEVIE TYPE M= Plug, Female MP = Plug, Male MI = Plug, Male Inline ME = Male/Female Extension able MP M S 2 1 Male/Female Female Plugs Male Plugs Extension ables able Length Straight Right ngle Straight Right ngle In-line Straight Straight 6.6 ft (2m) MMS2212 MM2212 MPMS2212 MPM2212 MIMS2212 MEMS ft (4m) MMS2214 MM2214 MPMS2214 MPM2214 MIMS2214 MEMS ft (m) MMS221 MM221 MPMS221 MPM221 MIMS221 MEMS221 ll other lengths MMS221** MM221** MPMS221** MPM221** MIMS221** MEMS221** 6.6 ft (2m) MMS2312 MM2312 MPMS2312 MPM2312 MIMS2312 MEMS ft (4m) MMS2314 MM2314 MPMS2314 MPM2314 MIMS2314 MEMS ft (m) MMS231 MM231 MPMS231 MPM231 MIMS231 MEMS231 ll other lengths MMS231** MM231** MPMS231** MPM231** MIMS231** MEMS231** 6.6 ft (2m) MMS2412 MM2412 MPMS2412 MPM2412 MIMS2412 MEMS ft (4m) MMS2414 MM2414 MPMS2414 MPM2414 MIMS2414 MEMS ft (m) MMS241 MM241 MPMS241 MPM241 MIMS241 MEMS241 ll other lengths MMS241** MM241** MPMS241** MPM241** MIMS241** MEMS241** 6.6 ft (2m) MMS212 MM212 MPMS212 MPM212 MIMS212 MEMS ft (4m) MMS214 MM214 MPMS214 MPM214 MIMS214 MEMS ft (m) MMS21 MM21 MPMS21 MPM21 MIMS21 MEMS21 ll other lengths MMS21** MM21** MPMS21** MPM21** MIMS21** MEMS21** 6.6 ft (2m) MMS2612 MM2612 MPMS2612 MPM2612 MIMS2612 MEMS ft (4m) MMS2614 MM2614 MPMS2614 MPM2614 MIMS2614 MEMS ft (m) MMS261 MM261 MPMS261 MPM261 MIMS261 MEMS261 ll other lengths MMS261** MM261** MPMS261** MPM261** MIMS261** MEMS261** POLES vailability of specific items may vary. onsult factory for delivery. onsult the factory for additional cable lengths or cable types. Male Face Shown Female - mirror image OUPLING NUT MTERIL M = Metallic N = Nylon 2-6 Pole Dual Key Plugs ODY STYLE = Right ngle S = Straight Replace ** with length required in feet. For nylon coupling nuts, replace M with N per the ordering chart above. Example: change MMS2314 to MNS2314. ONDUTOR TYPE 1 = #22 WG PV able 2 = #18 WG TPE able LE LENGTH (m) ** pole only ** Replace w / length atalog numbers using #22 WG PV cable are listed below. For #18 WG TPE cable, change the conductor type per the Hubbell Logic chart above. Poles KEY STYLE 2 = Dual 2 G-21 Micro-Quick ontrol onnectors Dual Key 2-6 Pole Plugs

22 Micro-Quick ontrol onnectors Micro-Quick ontrol onnectors Dual Key 2-6 Pole Plugs Straight Plug 1/2-20 UNF MLE FEMLE 0.9 (1.0) 0.9 (1.0) 1.83 (46.) 1.83 (46.) 2.7 (69.9) 2.7 (69.9) D Right ngle Plug E 1/2-20 UNF MLE FEMLE 0.9 (1.0) 0.9 (1.0) 1.44 (36.6) 1.44 (36.6) 2.7 (69.9) 2.7 (69.9) D 0.67 (17.0) 0.67 (17.0) E 1.1 (29.2) 1.1 (29.2) Right ngle Male In-Line Plug D 0.9 (1.0) 1.44 (36.6) 2.7 (69.9) D 0.67 (17.0) E 1.38 (3.1) E 1/2-20 UNF Male In-Line Plug Extension able M12 x 1 1/2-20 UNF 1/2-20 UNF MLE FEMLE 0.9 (1.0) 0.9 (1.0) 2.06 (2.3) 1.83 (46.) Dual Key 2-6 Pole Plugs ESSORIES Dust aps losure caps protect plugs and receptacles when not in use. Key style is for dual with thread of 1/2-20 UNF. atalog # MRM2 MPM2 0.9 (1.0) 2.06 (2.3) 2.7 (69.9) onductor olor ode - Dual Key ontact Number Pole Pole Pole Pole Pole 1 rown Green Red/lack Red/White Red/White 2 lue Red/lack Red/White Red Red 3 Red/White Red Green Green 4 Green Red/Yellow Red/Yellow Red/lack Red/lack 6 Red/lue able Diameters y able Type Number of onductors #22 WG PV #18 WG TPE (.1) 0.23 (.8) (.3) 0.24 (6.09) (.7) 0.26 (6.6) 0.26 (6.7) 0.28 (7.1) (6.) - G-22

23 Micro-Quick ontrol onnectors Dual Key 2-6 Pole Receptacles hoose the appropriate configuration from the Selector below. Hubbell Logic onfigurator For example, atalog Number MRMS2232 is derived as follows: DEVIE TYPE MR= Receptacle, Female M= Receptacle, Male MF = Receptacle, Female Inverse POLES MR M S vailability of specific items may vary. onsult factory for delivery. onsult the factory for additional cable lengths or cable types. Male Face Shown Female - mirror image SHELL MTERIL M = Metallic 2-6 Pole Dual Key Receptacles ODY STYLE S = Straight Female Receptacles Male Receptacles Female Inverse Receptacles Rear Style Rear Style Rear Style 1/4 NPT 1/2 NPT 1/4 NPT 1/2 NPT 1/4 NPT MRMS2232 MRMS2230 MMS2232 MMS2230 MFMS2232 MRMS2332 MRMS2330 MMS2332 MMS2330 MFMS2332 MRMS2432 MRMS2430 MMS2432 MMS2430 MFMS2432 MRMS232 MRMS230 MMS232 MMS230 MFMS232 MRMS2632 MRMS2630 MMS2632 MMS2630 MFMS ONDUTOR TYPE 3 = #22 WG PV Discrete Wire 4 = #18 WG PV Discrete Wire 2 - pole only RER THRED STYLE 2 = 1/4 NPT* 0 = 1/2 NPT * MF Only vailable w/ 2 atalog numbers using #22 WG PV cable are listed below. For #18 WG PV discrete wire, change the conductor type per the Hubbell Logic chart above. Poles KEY STYLE 2 = Dual 2 G-23 Micro-Quick ontrol onnectors Dual Key 2-6 Pole Receptacles

24 Micro-Quick ontrol onnectors Micro-Quick ontrol onnectors Dual Key 2-6 Pole Receptacles D D F F 1/4 NPT Rear Receptacle E 1/2-20 UNF c 1/4" NPT.6 (14.2) Panel cutout MLE FEMLE 0.7 (19.1) 0.7 (19.1) 0.7 (19.1) 0.86 (21.8) 0.10 (2.) 0.10 (2.) D 12.0 (304.8) 12.0 (304.8) E 0.62 (1.8) 0.62 (1.8) F 0.3 (8.9) 0.38 (9.7) 1/2 NPT Rear Receptacle E G P l t t Max panel thickness 1/2-20 UNF 1/2" NPT MLE FEMLE 1.00 (2.4) 1.00 (2.4) 1.00 (2.4) 1.00 (2.4) 0.24 (6.10) 0.24 (6.1) D 12.0 (304.8) 12.0 (304.8) E 0.87 (22.1) 0.87 (22.10) F 0.46 (11.7) 0.46 (11.7) G 0.8 (21.6) 0.8 (21.6) Female Inverse Receptacle 1/4 NPT Rear D F E G 0.7 (19.1) 0.86 (21.8) 0.1 (3.8) D 12.0 (304.8) E 0.62 (1.8) F 0.40 (10.2) G 0.6 (14.2) 1/2-20 UNF Max panel thickness 1/4" NPT Panel cutout ll dimensions are shown in inches (mm) onductor olor ode - Dual Key ontact Number Pole Pole Pole Pole Pole 1 rown Green Red/lack Red/White Red/White 2 lue Red/lack Red/White Red Red 3 Red/White Red Green Green 4 Green Red/Yellow Red/Yellow Red/lack Red/lack 6 Red/lue Dual Key 2-6 Pole Receptacles ESSORIES Dust aps losure caps protect plugs and receptacles when not in use. is 1/2-20 UNF. atalog # MRM2 MPM2 G-24

25 Micro-Quick ontrol onnectors Inverse Key 3-4 Pole Plugs & Receptacles hoose the appropriate configuration from the Selector below. Hubbell Logic onfigurator For example, atalog Number MMS3312 is derived as follows: DEVIE TYPE M= Plug, Female M M S atalog numbers using #22 WG PV cable are listed below. For #18 WG TPE cable, change the conductor type per the Hubbell Logic chart above. Male Face Shown Female Plugs Male Face Shown Female Plugs Female - mirror Female - mirror Poles image able Length Straight Right ngle Poles image Straight Right ngle 6.6 ft (2m) MMS3312 MM3312 MMS3412 MM ft (4m) MMS3314 MM MMS3414 MM ft (m) MMS331 MM331 4 MMS341 MM341 ll other lengths MMS331** MM331** MMS341** MM341** Replace ** with length required in feet. For nylon coupling nuts, replace M with N per the ordering chart above. Example: change MM2314 to MN2314. OUPLING NUT MTERIL M = Metallic N = Nylon Male Receptacle Rear Style M14 x 1 MMS33314 ODY STYLE = Right ngle S = Straight KEY STYLE 3 = Inverse POLES 3 4 vailability of specific items may vary. onsult factory for delivery. onsult the factory for additional cable lengths or cable types. 3-4 Pole Inverse Key Plugs Hubbell Logic onfigurator For example, atalog Number MMS33314 is derived as follows: DEVIE TYPE M= Receptacle, Male Poles 3 Male Face Shown Female - mirror image Poles 4 Male Face Shown Female - mirror image ONDUTOR TYPE 1 = #22 WG PV able 2 = #18 WG TPE able atalog numbers using #22 WG PV discrete wire are listed below. For #18 WG PV discrete wire, change the conductor type per the Hubbell Logic chart above OUPLING NUT MTERIL M = Metallic ODY STYLE S = Straight M M S Pole Inverse Key Receptacles KEY STYLE 3 = Inverse POLES 3 4 ONDUTOR TYPE 3 = #22 WG PV Discrete Wire 4 = #18 WG PV Discrete Wire Male Receptacle Rear Style M14 x 1 MMS34314 LE LENGTH (m) ** 2 4 ** Replace w / length 2 RER THRED STYLE 14 = M12x1 14 G-2 Micro-Quick ontrol onnectors Inverse Key 3-4 Pole Plugs & Receptacles

26 Micro-Quick ontrol onnectors Micro-Quick ontrol onnectors Inverse Key 3-4 Pole Plugs & Receptacles Straight Female Plug M12 x (1.0) 1.83 (46.) 2.7 (69.9) D Right ngle Female Plug M12 x 1 E 0.9 (1.0) 1.44 (36.6) 2.7 (69.9) D 0.67 (17.0) E 1.1 (29.2) Male Receptacle M14 x 1 Rear Inverse Key 3-4 Pole Plugs & Receptacles D G Panel cutout M12 x 1 E Max panel thickness M14 x (1.0) 0.63 (16.0) 1.44 (36.6) 0.7 (19.0) 2.7 (69.9) 12.0 (304.8) D 0.67 (17.0) 0.29 (7.4) E 1.38 (3.0) 0.0(1.27) G 0.6 (14.2) ESSORIES Dust aps losure caps protect plugs and receptacles when not in use. is M12X1. atalog # MRM1 MPM1 able Diameters y able Type ontact 3 4 Number Pole Pole 1 rown rown 2 lue lue 3 Not Used lack 4 Green/Yellow Green/Yellow onductor olor ode Number of #22 WG #18 WG onductors PV TPE (.30) 0.24 (6.1) (.68) 0.26 (6.6) G-26

27 Micro-Quick ontrol onnectors oil ord oil ord allows control connector plugs to extend and retract to pre-defined lengths, much like a mechanical spring. oil cords come standard with 18 WG polyurethane (PUR) jacketed cable. onsult factory for alternate construction. Simply choose the appropriate configuration from the selector below. Hubbell Logic onfigurator For example, atalog Number MMS1410 is derived as follows: DEVIE TYPE M= Plug, Female MP= Plug, Male MI = Plug, Male Inline ME = Male/Female Extension able M M S 1 4 6" (12.4) OUPLING NUT MTERIL M = Metallic N = Nylon 2.7" (69.9) onsult factory for availability Material Specifications 18 WG PUR PUR jacket, black PV conductor insulation Stranding - 41/34 ODY STYLE = Right ngle S = Straight KEY STYLE 1 = Single 2 = Dual (Extended) (Retracted) 1.m 0.26m 4.0m 0.69m POLES 3 4 able Diameter Number of onductors Diameter (6.1) (6.6) LE TYPE EXTENDED LENGTH (m) 10 = 1.m 4 = 4.0m 10 olor odes - Single Key (Female Face) Wire olor 1 rown 2 White 3 lue 4 lack olor odes - Dual Key (Female Face) Wire olor 1 Green 2 Red/lack 3 Red/White G-27 Micro-Quick ontrol onnectors oil ord

28 Micro-Quick ontrol onnectors Micro-Quick ontrol onnectors LED ables LED Plugs Micro-Quick plugs are available in NPN and PNP LED versions to aid in visibility of sensor functions in the manaufacturing plant. These plugs are available in the 3 pole, single key, straight, and right angle configurations. The last digit of each catalog number gives the assembly length in meters, with 22 WG cable as the standard. Electrical Rating: /30V D ontact #3 ontact #4 ontact #1 Y E L L O W G R E E N (-) lue lack (+) rown ontact #1 ontact #4 ontact #3 Y E L L O W G R E E N (+) rown lack (-) lue Micro-Quick Right ngle Female LED Plugs PNP Version atalog Numbers Description Metallic oupling Nut Nylon oupling Nut 3 Pole, 2 Meter MMP1312 MNP Pole, 4 Meter MMP1314 MNP Pole, Meter MMP131 MNP131 3 Pole, * Meter MMP131* MNP131* NPN Version atalog Numbers Description Metallic oupling Nut Nylon oupling Nut 3 Pole, 2 Meter MMN1312 MNN Pole, 4 Meter MMN1314 MNN Pole, Meter MMN131 MNN131 3 Pole, * Meter MMN131* MNN131* * User specified cable length Yellow LED Green LED 0.67" (17.0).9" (1.0) 2.7" (69.9) 1.20" (30.4) 1.44" (36.6) Micro-Quick Straight Female LED Plugs PNP Version atalog Numbers Description Metallic oupling Nut Nylon oupling Nut 3 Pole, Meter MMPS131 MNPS131 3 Pole, * Meter MMPS131* MNPS131* NPN Version atalog Numbers Description Metallic oupling Nut Nylon oupling Nut 3 Pole, Meter MMNS131 MNNS131 3 Pole, * Meter MMNS131* MNNS131* * User specified cable length M12 x 1 Ø 0.9 (1.0) 1.83 (46.) 2.7 (69.9) Green and Yellow LEDs Specifications olor odes Wire olor 1 rown 2 Not Used 3 lue 4 lack G-28

29 .86" (21.8) Micro-Quick Field ttachable onnectors - Screw Terminal Style rass oupling Nut - Nickel Plated. Female Male In-Line Set Screw - Standard 1/16" Hex for Easy Terminations. 1.64" (41.7) ody able Range 3 Pole 4 Pole Pole.14"-.27" ( ) MMS23F1 MMS14F1 MMS1F1 Straight.2"-.31" ( ) MMS23F2 MMS14F2 MMS1F2 Right ngle.14"-.27" ( ) MM23F1 MM14F1 MM1F1.2"-.31" ( ) MM23F2 MM14F2 MM1F2 Straight Right ngle 14"-.27 ( ).14"-.27" ( ) MIMS23F1 MIM23F1 MIMS14F1 MIM14F1 MIMS1F1 MIM1F1.2"-.31" ( ).2"-.31" ( ) MIMS23F2 MIM23F2 MIMS14F2 MIM14F2 MIMS1F2 MIM1F2 1.46" F1= (37.0) 1.93" F2= (49.0).86" (21.8) Precision Wire Funnels - Eliminate Stray Strands. 1.46" (37.0) F1= 2.84".86" (72.1) 1.46" (21.8) F1= (37.0) F2= 3.31" (84.1) F2= 1.93" (49.0).80" (20.3) Female, Right ngle Female, Straight Male In-Line, Right ngle F1= 3.00" (76.2) F2= 3.48" (88.4) Male In-Line, Straight Male Face Shown Female - mirror image ody- High-impact Insulgrip Design. ircuit ID label. Superior ontact Design - Utilizing High Performance Material: Gold Over Palladium Nickel Plating. Material Specifications Insulator Housing ollar over Wire Guide Strain Relief ushing ontact Materials ontact Plating oupling/oupler Nut Gotcha -rings ushings Nuts Set Screw PT, White Nylon 6/6, lack Nylon 6/6, White Nylon 6/6, White Nylon 6/6, White Neoprene, White Pins-rass, Sockets-eryllium copper Hard gold over palladium/nickel Nickel plated brass Nylon 6/6, Natural, yellow and black Rubber, lack Nylon 6/6, lack Zinc plated steel Electrical Specifications Voltage Rating 20V /D Wire Range 18WG max, 22 WG min. able Diameters F1= , F2= mperage #18 WG- 3p=8, 4p=6, p= #22 WG- 3p=, 4p=4, p=3 ontact Resistance < mω Isolation Resistance Patented Gotcha Ring - Strain Relief Design to Prevent Wire Damage MΩ Environmental Specifications Moisture Resistance UL Type 4, 4X, 12 and 13, IP67 Operating Temperature -20 to 10 orrosion Resistance 00 hours salt spray per MIL-STD- 1344, Method 1001 Vibration Resistance 10-2,000 1g per MIL-STD- 1344, Method 200 G-29 Micro-Quick Screw Terminal Style onnectors Field ttachable onnectors

30 Micro-Quick ID Style onnectors Micro-Quick Field ttachable onnectors - ID Style llows field installation of control connector. Insulation Displacement ontacts do not require stripped conductors, greatly speeding installation. Rugged, nickel-plated hardware- Excellent corrosion and abuse resistance. opper alloy- insulation displacement contacts. Wire guide- For virtually toolless termination. Strain relief- bushing protects terminations and provides IP67 ingress protection. Micro-Quick ID ody able Range Wire Gauge 3 Pole 4 Pole Straight.16"-.21" (4.1-.3) MMS13ID MMS14ID Female.22"-.32" (.6-8.1) MMS13IDL MMS14IDL Right ngle.16"-.21" (4.1-.3) MM13ID MM14ID Straight.16"-.21" (4.1-.3) MIMS13ID MIMS14ID Male.22"-.32" (.6-8.1) MIMS13IDL MIMS14IDL In-Line Right ngle.16"-.21" (4.1-.3) MIM13ID MIM14ID Male Face Shown Female - mirror image 2.0" (1.6mm) 1.6" (39.4mm) Material Specifications Housing Wire Guide Polyester Elasomer, lack Nylon 6/6, Gray.8" (14.7mm) 1.4" (36.mm) Strain Relief ushing ontact Materials Neoprene, lack opper lloy MMS13ID ontact Plating oupling Nut Tin over Nickel Zinc lloy with Nickel Plating.8" (14.7mm) MM13ID O-ring able ompression Nut Neoprene, lack Zinc lloy with Nickel Plating Electrical Specifications Field ttachable onnectors.90" (20.mm).90" (20.mm) 1.9" (48.8mm) MMS13IDL 2.1" (2.2mm) MIMS13IDL.8" (14.7mm) 2.2" (4.8mm) MIMS13ID 1.6" (39.4mm).8" (14.7mm) MIM13ID 1.6" (39.4mm) atalog Suffix ID IDL Voltage Rating 32V 0V Wire Range #22WG max.,#24wg min. #18WG max.,#22wg min. able Diameters.17" to.210" (3.9 to.3 mm).216" to.31" (. to 8 mm) mperage 3 6 ontact Resistance < mω < mω Environmental Specifications Ingress Protection IP67 Suitability Operating Temperature -20 to 110 Field ttachable onnectors G-30

31 Nano-Quick ontrol onnectors Nano-Quick ontrol onnectors s time goes by, electronics get smaller and smaller. Industry demands for smaller photo eyes and 8 mm proximity switches have led to the demand for the connectors that mate with them; the Hubbell Nano-Quick connector meets that demand. s connectors get smaller, the components become smaller and more fragile and it becomes more important than ever to use the best and strongest materials to ensure a sturdy, long lasting connector. Hubbell Nano-Quick connectors meet your need for a tough connector in a tiny package. Field ttachable onnectors Hubbell s Nano-Quick line features: UL Listed connectors with UL Type 4, 4X, 12 and 13 environmental ratings. eryllium copper socket contacts maintain continuity over time and reduce intermittencies. Gold over palladium nickel contact plating for superior conductivity and extended contact life. Snap type coupling option in addition to standard threaded coupling nut; both with UL 4X rating. Nano-Quick control connectors may be small, but they are also Hubbell industrial connectors, so you can count on them to perform for you. The Nano-Quick ontrol onnector product offering consists of 3 and 4 pole straight and right angle female plugs in a variety of cable types and lengths and male pre-wired receptacles. The Nano-Quick Hubbell Logic chart will help you to build your custom connector quickly and easily. G-31

32 Nano-Quick ontrol onnectors Nano-Quick ontrol onnectors Features and enefits Hard Gold Over Palladium Nickel ontact Plating- Superior onductivity, Extended ontact Life. eryllium opper Socket ontacts- Ensures contacts maintain their shape and continuity Gated Strain Relief with Graduated Window Sizes- Improved Flexibility and Strength Protects Wire Terminations Superior arc of bend control. O-Rings- Moisture Protection. nti-vibration oupling Nut- Prevents coupling nut from loosening under harsh vibration conditions Features enefits Nickel plated brass coupling nuts and receptacle shells. Plating resists corrosion in high abuse environments. lack overmold and cable. able assembly resists dirt and blends with environment giving a clean look to the installation. Insulgrip connector body design. Ergonomic connector body has an industrial look. UL Listed cable assemblies and receptacles. Third party certified for electrical, mechanical and environmental performance. Material Specifications Insulator Materials Nylon 6/6, White ontact Materials Pins - rass, Sockets Sockets - eryllium copper ontact Plating Hard gold over palladium/nickel Overmold Material Polyurethane, lack oupling Nut, Metallic Nickel plated brass Receptacle Shell Nickel plated brass able #24 WG - PV jacket, lack, PV conductor insulation, opper braid - 8% coverage, Stranding 19/36 #24 WG - TPE jacket, lack, PV conductor insulation, Stranding - 19/36 Strain Relief 20 pounds min per UL 2238 Features and enefits Electrical Specifications Voltage Rating 12V/7VD mperage 3&4P=4 ontact Resistance mω Isolation Resistance 1000 MΩ Environmental Specifications Moisture Protection UL Type 4, 4X, 12 and 13 Ingress Protection IP67 Operating Temperature PV able: -20 to 10 TPE able: -40 to 10 orrosion Resistance 00 hours salt spray per MIL-STD-1344, Method 1001 Vibration Resistance 10-2,000 per MIL-STD-1344, Method 200 ertifications UL 2238 and UL0, File No. E S ertified, 22.2 No and S 22.2 No. 94 G-32

33 Nano-Quick ontrol onnectors 3-4 Pole Plugs & Receptacles hoose the appropriate configuration from the Selector below. Hubbell Logic onfigurator For example, atalog Number NT310 is derived as follows: DEVIE TYPE N= Plug, Female N T 3 1 ed, Locking Snap Together able Length Straight Right ngle Straight Right ngle 6.6 ft/2m NTS3102 NT3102 NSS3102 NS ft (m) NTS310 NT310 NSS310 NS310 ll other lengths NTS31** NT31** NSS31** NS31** 6.6 ft (2m) NTS4102 NT4102 NSS4102 NS ft (m) NTS410 NT410 NSS4102 NS410 ll other lengths NTS41** NT41** NSS41** NS41** Male Receptacle Rear Style M8 x 1 NS3D POLES 3 4 Replace ** with length required in feet. For snap on retention style, replace T with S per the ordering chart above. Example: change NT310 to NS LE LENGTH (m) ** 02 0 ** Replace w / length vailability of specific items may vary. onsult factory for delivery. Use this chart to build plugs to meet any application need. onsult the factory for additional cable lengths or cable types. 3-4 Pole Female Plugs 3 4 Female Face Shown RETENTION STYLE T = ed, Locking S = Snap On ODY STYLE = Right ngle S = Straight LE TYPE 1 = #24 WG PV able 2 = #24 WG TPE able atalog numbers using #24 WG PV cable are listed below. For #24 WG TPE cable, change the cable type per the Hubbell Logic chart above. Poles Hubbell Logic onfigurator For example, atalog Number NS3D is derived as follows: DEVIE TYPE N= Receptacle, Male Poles 3 Male Face Shown RETENTION STYLE = ombination N S 3 D 3-4 Pole Male Receptacles Replace ** with length required in feet. ODY STYLE S = Straight Poles 4 POLES 3 4 Male Face Shown ONDUTOR TYPE D = 0.2m #24 WG discrete wire Male Receptacle Rear Style M8 x 1 NS4D 0 G-33 Nano-Quick ontrol onnectors 3-4 Pole Plugs and Receptacles

34 Nano-Quick ontrol onnectors Nano-Quick ontrol onnectors 3-4 Pole Plugs & Receptacles Straight Female Locking Plug M8 x (9.7) 1.1 (38.4) 2.7 (69.9) Right ngle Female Locking Plug E D M8 x (9.9) 1.04 (26.4) 2.7 (69.9) D 0.78 (19.8) E 0.38 (9.7) Straight Female Snap Together Plug Right ngle Female Snap Together Plug (8.6) (.6) 1.0 (38.1) 2.7 (69.9) D (9.9) (9.7) (.6) 1.04 (26.4) 2.7 (69.9) D 0.79 (20.1) 3-4 Pole Plugs & Receptacles Male ombination Receptacle D M8 x 1 Max panel thickness Panel cutout E F M8 x 1 ll dimensions are shown in inches (mm) 0.31 (7.9) 0.63 (16.0) 12.0 (304.8) D 0.3 (8.8) E 0.80 (2.0) F 0.9 (1.0) able Diameters y able Type Number of #24 WG #24 WG onductors PV TPE (.3) 0.21 (.3) (.3) 0.21 (.3) onductor olor ode ontact 3 4 Number Pole Pole 1 rown rown 2 Not Used White 3 lue lue 4 lack lack G-34

35 Nano-Quick ID Style Field ttachable onnectors - ID Style llows field installation of control connector. Insulation Displacement ontacts do not require stripped conductor greatly speeding installation. Nano-Quick ID ody able Range Wire Gauge Female Straight.17"-.210" (3.9-.3) NTS13ID NTS14ID Male Straight.17"-.210" (3.9-.3) NITS13ID NITS14ID Material Specifications Housing Wire Guide Strain Relief ushing ontact Materials ontact Plating oupling Nut O-ring able ompression Nut Electrical Specifications Voltage Rating Wire Range able Diameters mperage ontact Resistance 32V #22WG max.,#24wg min..17" to.210" (3,9 to,3 mm) 3 < mω Environmental Specifications Polyester Elasomer, lack Nylon 6/6, Gray Neoprene, lack opper lloy Tin over Nickel Zinc lloy with Nickel Plating Neoprene, lack Zinc lloy with Nickel Plating Ingress Protection IP67 Suitability Operating Temperature -20 to 110 Rugged, nickel-plated hardware- for excellent corrosion and abuse resistance. Strain relief bushing- protects terminations and provides IP67 ingress protection..1" (13.0mm).1" (13.0mm) opper alloy insulation displacement contacts. Wire guide- for virtually tool-less termination. 1.8" (46.7mm) NTS13ID 2.1" (2.mm) NITS13ID Male Face Shown Female - mirror image G-3 Nano-Quick onnectors - ID Style Field ttachable onnectors

36 SignalPlex Micro Ports SignalPlex Micro Ports SignalPlex Micro Ports The priorities in the industrial world today are automation and networking which means increased connections. The best way to maximize your connections and minimize your wiring and labor is by using Hubbell SignalPlex Micro Ports. SignalPlex Micro Ports allow you to centralize your connections by offering a single enclosure where you can make 4, 6 or 8 Micro-Quick connections. s a result, only a single home run cable is required to be wired back to your I/O or PL. Now, you can standardize on the cable lengths you run from your devices to the ports and minimize your inventory of custom length cable assemblies. SignalPlex Ports feature: UL Listed enclosures with UL Type 4, 4X, 12 and 13 environmental ratings. Receptacles that are flush with the enclosure minimizing the overall installed height and protecting them from abuse. eryllium copper socket contacts to maintain continuity and reduce intermittencies. Gold over palladium/nickel contact plating for superior conductivity and high mating cycles. SignalPlex Micro Ports are another line of quality enclosures from Hubbell. The localized connections that Hubbell SignalPlex Micro Ports provide minimize your wiring and make your repair jobs as quick as possible so you are back up and running in no time. G-36

37 SignalPlex Micro Ports Features and enefits LEDs on D Style Ports Maximum Visibility Homerun onnections onnectorized Hard wired lack Textured Finish Resists dirt and residue lean appearance Industrial dhesive ircuit ID Labels Easy to use and replace Flush Receptacle Enclosure Reduces installation height Protects receptacle shells Features onsistent mounting pattern between 4, 6 and 8 port enclosures. Hard gold over palladium/nickel contact plating. eryllium copper socket contacts. Wiring diagram on back of enclosure. UL Listed product. Material Specifications Housing Materials Rigid PV Micro-Quick Insulators Nylon 6/6, White Mini-Quick Insulator Thermoplastic Elastomer, White ontact Materials Pins - rass Sockets - eryllium copper ontact Plating Hard gold over palladium/nickel Receptacle Shell Nickel plated brass O-ring Nitrile rubber Electrical Specifications urrent Rating (Single Key, P/3W and P/4W) ontact Resistance Isolation Resistance Indicating LEDs urrent Limiting Resistor (Dual Key, 3P/3W) 300V Max, 3 per individual port, 7 per unit 10-30V D, 3 per individual port, 7 per unit mω 1000 MΩ Green = Power, Yellow = Signal/Function 2200 Ω enefits llows quick change over to increase or decrease the number of ports without having to drill new holes. Durable plating for high mating cycles and extended contact life. Strong, resilient base metal ensures contacts maintain their shape and continuity over time. Wiring diagram is accessible even if instructions are lost. Third party certified for electrical, mechanical and environmental performance. Strain Relief Thermoplastic Elastomer Receptacle aps Nickel plated brass LED Life Expectancy 100,000 hours ircuit ID Labels dhesive Polyester able #18 WG, PV insulated stranded copper conductors lack PV jacket able Stranding 41/34 Environmental Specifications Moisture Protection UL Type 4, 4X, 12 and 13 Ingress Protection IP67 Operating Temperature -20 to 8 TPE able: -40 to 10 orrosion Resistance 00 hours salt spray per MIL-STD-1344, Method 1001 Vibration Resistance 10-2,000 per MIL-STD-1344, Method 200 ertifications UL 2238 and UL0 S ertified, 22.2 No and S 22.2 No. 94 G-37 SignalPlex Micro Ports Features and enefits

38 SignalPlex Micro Ports SignalPlex Micro Ports 4 Port Enclosure Dimensions 1.30 (33.0) 4 Port Front View* 4.22 (107.2) ø.200 HOLE FOR # 8 SREWS 3X 2.12 (3.9) 0.36 (9.1) 2.88 (73.2) * Hard wired and connectorized enclosures have same enclosure dimensions. Profile Views onnectorized MINI-QUIK 12 POLE REEPTLE 1 1 /8-16 UN THRED Hard Wired 1.22 (31.0).77 (19.6) 0.77" (19.6) Micro-Quick 4 Port Enclosures onnectorized Micro-Quick with Mini-Quick Hard Wired Female Poles/ Micro-Quick Voltage LED Receptacle Face Male Receptacle with m able View Wires ircuit Style Rating Status MM342 MMW3420* 3P/3W Dual Key 300V No MM441 MMW4410* P/3W PNP 10-30V D Yes MM44 MMW440* 1 3 NPN 4 MM41 MMW410* P/ 4W PNP 10-30V D Yes MM4 MMW40* NPN * For additional cable lengths, consult factory. Mating Mini-Quick cable assemblies are located on page G44. 4 Port G-38

39 SignalPlex Micro Ports 4 Port Wiring Diagrams 4 Port olor odes (Hard Wired) MMW3420 MMW4410 MMW410 ommon White - - Ground Green - Green/Yellow J1 Load Red White White J2 Load Orange Orange Orange J3 Load lack Yellow Yellow J4 Load lue Grey Grey (+) Positive - rown rown (-) Negative - lue lue PIN 9 NOT USED PIN 1 LOD J1 / WHITE PIN 3 LOD J3 / YELLOW PIN NOT USED PIN 7 NOT USED PIN 8 NOT USED PIN 6 NOT USED PIN 4 LOD J4 / GRY PIN 11 (-) NEGTIVE / LUE LOD J2 / ORNGE PIN 2 PIN 10 (+) POSITIVE / ROWN PIN 12 NOT USED * PNP ircuit Shown Single Key P/3W PORT 1 J1 3 4 D R PORT 2 J2 D1 3 PORT 3 J3 2 1 R D4 R PORT 4 J4 4 R3 D3 D R GREEN 2200 PIN 9 PIN 1 PIN 3 PIN PIN 7 PIN 8 PIN 6 PIN 4 PIN 11 PIN 2 PIN 10 PIN 12 PIN 9 PIN 1 PIN 3 PIN PIN 7 PIN 8 PIN 6 PIN 4 PIN 10 PIN 2 PIN 11 PIN 12 ERTH GND / GREEN J1LOD (L2) / RED J3LOD (L2) / LK NOT USED NOT USED NOT USED NOT USED J4LOD (L2) / LUE NOT USED NOT USED ERTH GND / GREEN/YELLOW LOD J1 / WHITE LOD J3 / YELLOW NOT USED NOT USED NOT USED NOT USED LOD J4 / GRY (-) NEGTIVE / LUE LOD J2 / ORNGE (+) POSITIVE / ROWN NOT USED * PNP ircuit Shown (L1) OMMON / WHITE J2LOD (L2) / ORNGE Dual Key 3P/3W Single Key P/4W PORT 1 J D R PORT 2 J2 PORT 1 PORT PORT 2 1 R D J2 J1 PORT 3 J D4 R PORT 4 J4 PORT 4 R3 D J4 J3 D R GREEN 2200 SignalPlex Micro Ports 4 Port G-39

40 SignalPlex Micro Ports SignalPlex Micro Ports 6 Port Enclosure Dimensions 6 Port Front View*.29 (134.4) ø.200 HOLE FOR # 8 SREWS 3X 1.30 (33.0) 2.12 (3.9) 0.36 (9.1) 2.88 (73.2) * Hard wired and connectorized enclosures have same enclosure dimensions. onnectorized MINI-QUIK 12 POLE REEPTLE 1 1 /8-16 UN THRED Profile Views Hard Wired 1.22" (31.0).77 (19.6) 0.77" (19.6) Micro-Quick 6 Port Enclosures onnectorized Micro-Quick with Mini-Quick Hard Wired Female Poles/ Micro-Quick Voltage LED Receptacle Face Male Receptacle with m able View Wires ircuit Style Rating Status MM362 MMW3620* 3P/3W Dual Key 300V w/o LEDs MM461 MMW4610* P/3W PNP 10-30V D w/leds 1 3 MM46 MMW460* NPN 4 MM61 MMW610* P/ 4W PNP 10-30V D w/leds 1 3 MM6 MMW60* NPN 4 * For additional cable lengths, consult factory. Mating Mini-Quick cable assemblies are located on page G Port G-40

41 SignalPlex Micro Ports 6 Port Wiring Diagrams 6 Port olor odes (Hard Wired) PIN 9 PIN 1 PIN 3 PIN PIN 7 PIN 8 PIN 6 PIN 4 PIN 11 PIN 2 PIN 10 PIN 12 NOT USED LOD J1 / WHITE LOD J3 / YELLOW LOD J / PINK NOT USED NOT USED LOD J6 / RED LOD J4 / GRY (-) NEGTIVE / LUE LOD J2 / ORNGE (+) POSITIVE / ROWN NOT USED PNP ircuit Shown MMW3620 MMW4610 MMW610 ommon White - - Ground Green - Green/Yellow J1 Load Red White White J2 Load Orange Orange Orange J3 Load lack Yellow Yellow J4 Load lue Grey Grey J Load White/lack Pink Pink J6 Load Red/lack Red Red (+) Positive - rown rown (-) Negative - lue lue Single Key P/3W PORT 1 J1 3 4 D R PORT 2 J2 D1 PORT 3 J3 3 4 R D4 2 1 R PORT 4 J4 R3 D3 PORT J D6 R PORT 6 J6 R D D7 R7 GREEN 2200 PIN 9 PIN 1 PIN 3 PIN PIN 7 PIN 8 PIN 6 PIN 4 PIN 11 PIN 2 PIN 10 PIN 12 PIN 9 PIN 1 PIN 3 PIN PIN 7 PIN 8 PIN 6 PIN 4 PIN 10 PIN 2 PIN 11 PIN 12 ERTH GND/GREEN J1LOD (L2) / RED J3LOD (L2) / LK JLOD (L2) / WHITE/LK NOT USED NOT USED J6LOD (L2) / RED/LK J4LOD (L2) / LUE (L1) OMMON / WHITE J2LOD (L2) / ORNGE NOT USED NOT USED ERTH GND / GREEN/YELLOW LOD J1 / WHITE LOD J3 / YELLOW LOD J / PINK NOT USED NOT USED LOD J6 / RED LOD J4 / GRY (-) NEGTIVE / LUE LOD J2 / ORNGE (+) POSITIVE / ROWN NOT USED PNP ircuit Shown Dual Key 3P/3W PORT 1 PORT J1 PORT 2 Single Key P/4W PORT 1 J D R PORT 2 J J2 R D1 PORT 3 J3 D4 R PORT 4 J4 PORT 4 R3 D J4 J3 PORT J D6 R PORT 6 J6 R D PORT 2 3 PORT J6 D7 R7 J GREEN 2200 G-41 SignalPlex Micro Ports 6 Port

42 SignalPlex Micro Ports SignalPlex Micro Ports 8 Port Enclosure Dimensions 8 Port Front View* ø.200 HOLE FOR # 8 SREWS 3X 6.3 (161.3) 1.30 (33.0) 2.12 (3.9) 0.36 (9.1) 2.88 (73.2) * Hard wired and connectorized enclosures have same enclosure dimensions. onnectorized Profile Views Hard Wired MINI-QUIK 12 POLE REEPTLE 1 1 /8-16 UN THRED 1.22 (31.0).77 (19.6) 0.77" (19.6) Micro-Quick 8 Port Enclosures onnectorized Micro-Quick with Micro-Quick Hard Wired Female Poles/ Micro-Quick Voltage LED Receptacle Face Male Receptacle with m able View Wires ircuit Style Rating Status MM382 MMW3820* 3P/3W Dual Key 300V w/o LEDs MM481 MMW4810* P/3W PNP 10-30V D w/leds 1 3 MM48 MMW480* NPN 4 MM81 MMW810* P/ 4W PNP 10-30V D w/leds 1 3 MM8 MMW80* NPN 4 * For additional cable lengths, consult factory. Mating Mini-Quick cable assemblies are located on page G Port G-42

43 SignalPlex Micro Ports 8 Port Wiring Diagrams 8 Port olor odes (Hard Wired) PIN 9 PIN 1 PIN 3 PIN PIN 7 PIN 8 PIN 6 PIN 4 PIN 11 PIN 2 PIN 10 PIN 12 NOT USED LOD J1 / WHITE LOD J3 / YELLOW LOD J / PINK LOD J7 / LK LOD J8 / VIOLET LOD J6 / RED LOD J4 / GRY (-) NEGTIVE / LUE LOD J2 / ORNGE (+) POSITIVE / ROWN NOT USED PNP ircuit Shown MMW3820 MMW4810 MMW810 ommon White - - Ground Green - Green/Yellow J1 Load Red White White J2 Load Orange Orange Orange J3 Load lack Yellow Yellow J4 Load lue Grey Grey J Load White/lack Pink Pink J6 Load Red/lack Red Red J7 Load lack/green lack lack J8 Load Orange/lack Violet Violet (+) Positive - rown rown (-) Negative - lue lue Single Key P/3W PORT 1 J D R PORT 2 J2 D1 PORT 3 J3 D4 R R PORT 4 J4 R3 D3 PORT J 3 4 D6 2 1 R PORT 6 J6 R D PORT 7 J7 3 4 D8 2 1 R PORT 8 J8 R7 D7 D9 R9 GREEN 2200 PIN 9 PIN 1 PIN 3 PIN PIN 7 PIN 8 PIN 6 PIN 4 PIN 11 PIN 2 PIN 10 PIN 12 PIN 9 PIN 1 PIN 3 PIN PIN 7 PIN 8 PIN 6 PIN 4 PIN 10 PIN 2 PIN 11 PIN 12 TH GND / GREEN ERTH GND/GREEN J1LOD (L2) / RED J3LOD (L2) / LK JLOD (L2) / WHITE/LK J7LOD (L2) / LK/GREEN J8LOD / ORNGE/LK J6LOD (L2) / RED/LK J4LOD (L2) / LUE (L1) OMMON / WHITE J2LOD (L2) / ORNGE NOT USED NOT USED ERTH GND / GREEN/YELLOW LOD J1 / WHITE LOD J3 / YELLOW LOD J / PINK LOD J7 / LK LOD J8 / VIOLET LOD J6 / RED LOD J4 / GRY (-) NEGTIVE / LUE LOD J2 / ORNGE (+) POSITIVE / ROWN NOT USED PNP ircuit Shown PORT 1 PORT J1 2 3 PORT Single Key P/4W PORT 1 J D R Dual Key 3P/3W J PORT 2 J2 R D1 PORT 4 D4 R PORT 3 J PORT 4 J J4 R3 D3 J3 PORT J D6 R PORT PORT 6 J6 PORT R D J6 J PORT 7 J7 D8 R PORT 8 J8 PORT J8 3 2 PORT 8 R7 D7 1 1 D9 R9 J7 GREEN 2200 G-43 SignalPlex Micro Ports 8 Port

44 SignalPlex Micro Ports SignalPlex Micro Ports ccessories SignalPlex Port Mating able ssemblies Micro-Quick Male In-Line Plugs for use with all SignalPlex Ports To Mate With Male In-Line Plugs Micro-Quick able SignalPlex Ports #22 WG PV able (Male Face View Shown) Length* onnectorized Hard Wired Straight Right ngle Poles MM342 MMW3420 MIMS2312 MIM ft/2m MM362 MMW3620 MIMS2314 MIM ft/4m MM382 MMW3820 MIMS231 MIM ft/m MM441 MMW4410 MIMS112 MIM ft/2m MM461 MMW4610 MIMS114 MIM ft/4m MM481 MMW4810 MIMS11 MIM ft/m MM41 MMW410 MIMS112 MIM ft/2m MM61 MMW610 MIMS114 MIM ft/4m MM81 MMW810 MIMS11 MIM ft/m *For additional cable lengths, consult factory. ll connectorized SignalPlex Ports have a Mini-Quick 12 pole on-board male receptacle. The mating Mini-Quick female plugs given below have been wired specifically for use with Hubbell SignalPlex ports to customize the number of wires used by each port. The color codes of the cables given below also match the color codes of the hard wired ports for your convenience. Mini-Quick Female Plugs for use with SignalPlex Ports To Mate With Mini-Quick Number onnectorized Female Plugs 12 Pole able able of Wires SignalPlex Port Straight Right ngle (Female Face View Shown) Length* Type in able MM342 HMS12412P6 HM12412P6 12 ft/3.66m #18 WG STOOW 6 MM362 HMS12312P8 HM12312P8 12 ft/3.66m #18 WM2661 PV 8 MM382 HMS12312P10 HM12312P10 12 ft/3.66m #18 WM2661 PV 10 MM441 MM41 HMS12312P7 HM12312P7 12 ft/3.66m #18 WM2661 PV 7 ccessories MM461 MM481 MM61 MM81 HMS12312P11 HM12312P11 12 ft/3.66m #18 WM2661 PV 11 * For additional cable lengths, please consult factory. For SignalPlexport specifications, color codes, and cable diameters, refer to individual pages. G-44

45 SignalPlex Micro Ports Specifications olor odes for Mini-Quick SignalPlex Port ables HM12412P6 HM12312P7 HM12312P8 HM12312P10 HM12312P11 HMS12412P6 HMS12312P7 HMS12312P8 HMS12312P10 HMS12312P11 1 Red White Red Red White 2 Orange Orange Orange Orange Orange 3 lack Yellow lack lack Yellow 4 lue Gray lue lue Gray Not Used Not Used White/lack White/lack Pink 6 Not Used Not Used Red/lack Red/lack Red 7 Not Used Not Used Not Used lack/green lack 8 Not Used Not Used Not Used Orange/lack Violet 9 Green Green/Yellow Green Green Green/Yellow 10 White rown White White rown 11 Not Used lue Not Used Not Used lue 12 Not Used Not Used Not Used Not Used Not Used able Diameters y Product Hard Wired Ports Port atalog # #18 WG able MMW (9.3) MMW (9.3) MMW (9.3) MMW (9.3) MMW (9.3) MMW (9.3) MMW (9.3) MMW (9.3) MMW (9.3) Mini-Quick Female Plugs Straight Right ngle #18 WG PV able HMS12412P6 HM12412P (12.7) HMS12312P7 HM12312P (9.3) HMS12312P8 HM12312P (9.3) HMS12312P10 HM12312P (9.3) HMS12312P11 HM12312P (9.3) Please Note: able diameters for Micro-Quick Male In-Line Plugs are located on page G-2. G-4 SignalPlex Micro Ports ccessories

46 SignalPlex Mini Ports SignalPlex Mini Ports SignalPlex Mini Ports The priorities in the industrial world today are automation and networking which means increased connections. The best way to maximize your connections and minimize your wiring and labor is by using Hubbell SignalPlex Mini Ports. SignalPlex Mini Ports allow you to centralize your connections by offering a single enclosure where you can make 4, 6 or 8 Mini-Quick connections. s a result, only a single home run cable is required to be wired back to your I/O or PL. Now, you can standardize on the cable lengths you run from your devices to the ports and minimize your inventory of custom length cable assemblies. SignalPlex Ports feature: UL Listed enclosures with UL Type 4, 4X, 12 and 13 environmental ratings. Receptacles that are side mounted with the enclosure minimizing the overall installed height and protecting them from abuse. opper lloy with stainless steel socket contacts to maintain continuity and reduce intermittencies. Gold over palladium/nickel contact plating for superior conductivity and high mating cycles. SignalPlex Mini Ports are another line of quality enclosures from Hubbell. The localized connections that Hubbell SignalPlex Mini Ports provide minimize your wiring and make your repair jobs as quick as possible so you are back up and running in no time. G-46

47 SignalPlex Mini Ports Features and enefits Illuminated Indicators- Power and signal Industrial dhesive ircuit ID Labels- Easy to use and replace. lack Textured Finish- Impact resistant Resists dirt and residue lean appearance. Side Mount Receptacle Enclosure- Reduces installation height Protects receptacle shells. Homerun onnections- onnectorized or Hard wired. Features Hard gold over palladium/nickel contact plating. opper alloy sockets with stainless steel sleeves. Wiring diagram on back of enclosure. Material Specifications Housing Materials Rigid PV Micro-Quick Insulators Nylon 6/6, White Mini-Quick Insulator Thermoplastic Elastomer, White ontact Materials Pins - rass Sockets - opper alloy w/stainless steel sleeve ontact Plating Hard gold over palladium/nickel Receptacle Shell Nickel plated brass O-ring Nitrile rubber Electrical Specifications Voltage Rating (with LEDs) 120V /D Max (without LEDs) 600V /D Max mperage (4-port) 10 Total (6-port) 9 Total (8-port) 8 Total ontact Resistance mω Isolation Resistance 1000 MΩ Indicating LEDs Green = Power, Yellow = Signal/Function enefits Durable plating for high mating cycles and extended contact life. Strong, resilient base metal ensures contacts maintain their shape and continuity over time. Wiring diagram is accessible even if instructions are lost. Strain Relief Thermoplastic Elastomer Receptacle aps Nickel plated brass LED Life Expectancy 100,000 hours ircuit ID Labels dhesive Polyester able #16 WG, PV insulated stranded copper conductors lack PV jacket able Stranding 6/34 Environmental Specifications Moisture Protection UL Type 4, 4X, 12 and 13 Ingress Protection IP67 Operating Temperature -20 to 8 TPE able: -40 to 10 orrosion Resistance 00 hours salt spray per MIL-STD-1344, Method 1001 Vibration Resistance 10-2,000 per MIL-STD-1344, Method 200 ertifications UL 2238 and UL0. S ertified, 22.2 No and S 22.2 No G-47 SignalPlex Mini Ports Features and enefits

48 SignalPlex Mini Ports SignalPlex Mini Ports 4 Port LED Indicators 7/8-16 UN 4 Port Top View 3.22 (81.8) 2.2 (7.2) 4 Port Side View 2.0 (.1) 1.8 (40.1) 1.7 (44.4) 4. (114.2) 2.02 (1.4) 1.7 (44.4) 3.90 (99.1) 1.63 (41.3) Mini-Quick 4 Port Enclosures Ports Mini-Quick onnectorized Hard Wired Female Receptacle Voltage LED Port with 1ft able Face View Wiring Rating Status HM341 HMW3411* 3W Parallel 120V /D Yes HM342 HMW3421* 3W Parallel 600V /D No HM441 HMW4411* 4W Parallel 120V /D Yes HM442 HMW4421* 4W Parallel 600V /D No HM42 HMW421* W Parallel 600V /D No HM44 HMW441* W Solenoid * For additional cable lengths, consult customer service. Mating Mini-Quick cable assemblies are located on page G4 and G. onnector Styles (onnectorized Ports) Port atalog Number Style Male View HM441 6 Pole Mini-Quick HM442 6 Pole Mini-Quick HM341 7 Pole Mini-Quick HM342 7 Pole Mini-Quick 4 Port olor odes (Hard Wired) ommon White - - Ground Green - Green/Yellow J1 Load Red White White J2 Load Orange Orange Orange J3 Load lack Yellow Yellow J4 Load lue Grey Grey (+) Positive - rown rown (-) Negative - lue lue 4 Port HM42 HM42 10 Pole Mini-Quick 10 Pole Mini-Quick G-48

49 SignalPlex Mini Ports 6 Port LED Indicators 3.22 (81.8) 3.90 (99.1) Mini-Quick 6 Port Enclosures * For additional cable lengths, consult customer service. Mating Mini-Quick cable assemblies are located on page G4 and G. onnector Styles (onnectorized Ports) Port atalog Number Style Male View HM361 HM362 HM461 HM462 6 Port Top View 2.2 (7.2) Ports Mini-Quick onnectorized Port Hard Wired with 1ft able Female Receptacle Face View Wiring Voltage Rating LED Status HM361 HMW3611* 3W Parallel 120V /D Yes HM362 HMW3621* 3W Parallel 600V /D No HM461 HMW4611* 4W Parallel 120V /D Yes HM462 HMW4621* 4W Parallel 600V /D No 9 Pole Mini-Quick 9 Pole Mini-Quick 9 Pole Mini-Quick 9 Pole Mini-Quick 7/8-16 UN 2.0 (0.8) 2.02 (1.3) 1.8 (40.1) 6 Port Side View 1.63 (41.3) 6 Port olor odes (Hard Wired) 1.7 (44.) 1.78 (4.1) 6.28 (19.4) ommon White - - Ground Green - Green/Yellow J1 Load Red White White J2 Load Orange Orange Orange J3 Load lack Yellow Yellow J4 Load lue Grey Grey J Load White/lack Pink Pink J6 Load Red/lack Red Red (+) Positive - rown rown (-) Negative - lue lue SignalPlex Mini Ports 6 Port G-49

50 SignalPlex Mini Ports SignalPlex Mini Ports 8 Port LED Indicators 8 Port Top View 2.2 (7.2) 7/8-16 UN 8 Port Side View 3.22 (81.8) 8.0 ( (101.6) 1.7 (44.) 2.02 (1.4) 1.7 (44.4) 3.90 (99.1) 1.63 (41.3) Mini-Quick 8 Port Enclosures Ports Mini-Quick onnectorized Hard Wired Female Receptacle Voltage LED Port with 1ft able Face View Wiring Rating Status HM381 HMW3811* 3W Parallel 120V /D Yes HM382 HMW3821* 3W Parallel 600V /D No HM481 HMW4811* 4W Parallel 120V /D Yes * For additional cable lengths, consult customer service. Mating and Mini-Quick cable assemblies are located on page G4 and G. onnector Styles (onnectorized Ports) Port atalog Number Style Male View HM Pole Mini-Quick HM Pole Mini-Quick HM Pole Mini-Quick HM Pole Mini-Quick 8 Port olor odes (Hard Wired) ommon White - - Ground Green - Green/Yellow J1 Load Red White White J2 Load Orange Orange Orange J3 Load lack Yellow Yellow J4 Load lue Grey Grey J Load White/lack Pink Pink J6 Load Red/lack Red Red (+) Positive - rown rown (-) Negative - lue lue 8 Port G-0

51 SignalPlex Mini Ports Wiring Schematics 4 Port HM42 6 Port 8 Port HM341 HM361 HM381 HM441 HM461 HM481 G-1 SignalPlex Mini Ports Wiring Schematics

52 Signal-Quick Signal-Quick Sensor Mounting ccessories Signal-Quick Sensor Mounting ccessories Signal-Quick is a full line of sensor mounting innovations designed to save design, manufacturing and maintenance costs. Industrial sensor mounts are costly and time consuming to fabricate. When subjected to harsh industrial environments sensor mounts can be misaligned and damaged. Signal-Quick accessories solve these problems. Sensor Mounting ccessories The Signal-Quick line includes cushioned sensor mounts, modular mounting components, sensor converters, brackets, protective caps and special application mounts. Sensor protection devices add longevity to standard tubular proximity sensors. Off-the-shelf brackets provide a cost effective, quick delivery alternative to self-design and fabrication. Mounting components give modularity and flexibility to any mounting challenge. Sensor converters increase the functionality of standard tubular proximity sensors allowing their use in new applications. Hubbell has a unique mounting solution for virtually every application. G-2

53 Signal-Quick Sensor Mounting ccessories ushioned Sensor Mounts Sensor Mounts Install tubular proximity sensors with a ushioned Sensor Mount and protect against over-travel damage. Reduces replacement expenses and downtime. Hubbell s ushioned Sensor Mounts feature: Spring-loaded housing eliminates impact damage. Reduces downtime & replacement expenses. Reduces spare sensor inventories. Shielded & non-shielded end caps eliminate abrasion damage. lock style or threaded housing designs. nodized aluminum or stainless steel. When something out of the ordinary happens or targets over-travel, the sensor simply retracts to avoid damage. The sensor returns to its original position and the equipment continues to operate. Specifications Material: ed Style lock Style nodized aluminum housing Zinc-plated brass jam nuts SM12LP is all Stainless Steel atalog No. E H SM8 M8 x 1 M16 x (3.1) 0.87 (22.1) 0.87 (22.1) SM12LP M12 x 1 M18 x (4.1) 0.9 (24) 0.83 (21.1) SM18 M18 x 1 M30 x (.1) 1.41 (3.8) 1.17 (29.7) SM30 M30 x 1. M47 x (.1) 2.01 (1) 1.47 (37.3) lock style atalog No. E H K L M ed style SM8 M8 x (19) 0.37 (9.) 0.62 (1.8) 0.87 (22.1) 0.72 (18.4) 1.0 (2.4) 0.14 (3.6) SM12 M12 x (19) 0.37 (9.) 1.0 (2.4) 0.87 (22.1) 0.98 (24.8) 1. (38.1) 0.20 (.2) SM18 M18 x (2.4) 0.0 (12.7) 1.2 (31.7) 1.17 (29.7) 1.21 (30.7) 1. (38.1) 0.18 (4.6) SM30 M30 x (34.9) 0.68 (17.) 2.0 (0.8) 1.47 (37.4) 2.03 (1.) 2. (63.) 0.26 (6.7) E E ed Style L K lock Style M H H G-3 Signal-Quick Sensor Mounting ccessories ushioned Sensor Mounts

54 Signal-Quick Sensor Mounting ccessories Signal-Quick Sensor Mounting ccessories Sensor Mounting System omponents racket Half lamp Set ase Rod HMST ed ase 0.7 (19.1) oupler The ultimate in positioning flexibility. Hubbell Sensor Mounting System (HMS) components create a superior structure for virtually any sensor(s) to be mounted and aimed. Dramatically reduce design costs and fabricating time.hubbell s ushioned Sensor Mounts feature: omplete system building blocks. rackets to accommodate all sensors. Extremely rigid mounting. Durable all metal construction. ssemble and adjust with a single allen wrench. Specifications Material: Half lamp: rackets: ases: Spacers: Rods: ouplers: Zinc diecast, zinc-plated steel screws 304 Stainless Steel Zinc-plated Steel Zinc-plated Steel Zinc-plated Steel Zinc-plated Steel Ø 1.0 (2.4) 3/8-16 THD HMS ounter Sunk ase 0.7 (19.1) Rods atalog No. HMSR10.91 (10) HMSR10, HMSR70 HMSR (70) Ø 1.0 (2.4) Ø 0.0 (12.7) Modular Mounting omponents HMS 0.0 (12.7) ouplers Ø 1.0 (2.4) LERNE HOLE FOR 3/8 SREW Spacers HMSS38, HMSS76 Ø 1.0 (2.4) Ø 0.39 (9.91) atalog No. HMSS (38) HMSS (76) G-4

55 HMSH 1.4 (36.8) KT12F Ø 0.48 (12.1) KT18 Ø 0.78 (19.8) 0.7 (19.1) 1.26 (32) KT30O Ø 1.19 (30.1) 1.7 (44.) 0.13 (3.3) racket Mount Ø 0.78 (19.8) 1.24 (31.4) 2.1 (4.6) (48.8) 1.12 (28.4) 0.1 (12.9) 0.77 (19.6) 1.28 (32.) 1.0 (2.4) Half lamp Ø 0.78 (19.8) 1.0 (26.7) 1.02 (2.9) Ø 0.71 (18.1) Ø 0.78 (19.8) djustment/locking screw /32" hex Ø ½" 1.0 (26.7) KT12 Ø 0.78 (19.8) KT18O Ø 0.71 (18.1) 1.28 (31.8) KTLS Ø 0.78 (19.8) 0.7 (19.1) 1.26 (32) 1.28 (32.) 0.7 (19.1) 1.34 (34) 0.66 (16.7) (17.3) 1.06 (26.9) 1. (39.37) 1.18 (30) 2.02 (1.4) 0.78 (19.8) Ø 0.21 (.33) 0.7 (19.1) rackets Ø 0.48 (12.1) Ø 0.78 (19.8) 2.36 (60) 2.80 (71.1) Ø 1.19 (30.1) LMP KT12O Ø 0.48 (12.1) 0.94 (23.9) KT30F KTMLS Ø 0.78 (19.8) 0.7 (19.1) 1.28 (32.) 0.1 (12.9) 1.12 (28.4) (36.8) 1.66 (42) 2.88 (73.1) 0.66 (16.8) 1.18 (30) 0.13 (3.3) racket Mount Ø 0.78 (19.8) 2.71 (68.9) 0.68 (17.3) Ø 0.21 (.33) 2.21 (6.2) olt-on lamp 0.7 (19.1) Ø 0.78 (19.8) 2.19 (.6) Ø 0.78 (19.8) 0.9 (1) 1.0 (26.7) Ø 0.71 (18.1) djustment/locking screw /32" hex 1.0 (26.7) Socket head cap screw 3/8" - 16 x 2" KT18F KT30 Ø 0.78 (19.8) 0.7 (19.1) 1.26 (32) 90 KTMLSF 1.06 (26.9) Ø 0.78 (19.8) 1.21 (30.7) 1.33 (33.1) 2.3 (9.7) 1.81 (46.1) 1.10 (27.9) 1.18 (30) 2.76 (70.1) Ø 0.21 (.33) 0.71 (18.1) Ø 0.78 (19.8) 1.43 (36.2) Ø 1.19 (30.1) 0.9 (1) G- Signal-Quick Sensor Mounting ccessories Stop Screws, Limit Switches and Proximity Probes

56 Signal-Quick Sensor Mounting ccessories Signal-Quick Flat and Right ngle djustable rackets Sensor Mounting rackets Eliminate design time and fabrication expense. hoose the Hubbell ngle racket or Flat racket to mount any tubular proximity sensor. Fixed mounting patterns or multi-slotted for positioning versatility. Industry standard mounting footprints. Rapid installation. Immediately available from stock. ost savings over make your own. Flat rackets D E G F Material Specifications Material: Stainless Steel atalog No. D E F G Thickness F (12.1) 1.9 (49.6) 1.2 (31.8) 0.86 (21.8) 0.47 (11.9) 0.22 (.4) 0.7 (19.1) 0.12 (3.02) F (18.2) 2.27 (7.6) 1.38 (34.9) 1.36 (34.6) 0.22 (.6) 0.24 (6.0) 1.0 (2.4) 0.12 (3.02) F (22.1) 2.27 (7.6) 1.38 (34.9) 1.36 (34.6) 0.22 (.6) 0.26 (6.48) 0.88 (22.2) 0.12 (3.02) F (30.1) 3.42 (86.9) 2.0 (0.8) 2.0 (2) 0.37 (9.40) 0.31 (7.94) 1.2 (31.8) 0.12 (3.02) F (47.2) 4.0 (102.8) 2. (63.) 2.24 (6.8) 0.6 (14.3) 0.39 (9.91) 1. (38.1) 0.12 (3.02) Flat and Right ngle djustable rackets djustable ngle rackets F I G H D K E J 90- Material Specifications Material: Stainless steel Zinc-plated steel (47) atalog No. D E F G H I J K (2.4) 1.2 (31.8) 1.2 (31.8) 0.34 (8.74) 0.31 (7.92) 0.22 (.4) 0.62 (1.9) 0.46 (11.9) 0.28 (7.14) 0.07 (1.78) 0.38 (9.3) (38.1) 1.37 (34.8) 1. (38.1) 0.0 (12.7) 0. (13.9) 0.22 (.4) 0.7 (19.1) 0.6 (14.3) 0.31 (7.92) 0.07 (1.78) 0.0 (12.7) (0.8) 1.37 (34.8) 1.7 (44.) 0.72 (18.3) 0.7 (19.1) 0.22 (.4) 1.0 (2.4) 0.6 (14.3) 0.31 (7.92) 0.07 (1.78) 0.63 (1.9) (0.8) 1.37 (34.8) 1.7 (44.) 0.88 (22.2) 0.69 (17.4) 0.22 (.4) 1.0 (2.4) 0.6 (14.3) 0.31 (7.92) 0.07 (1.78) 0.63 (1.9) (63.) 1.7 (44.) 2.2 (7.2) 1.19 (30.1) 0.91 (23) 0.28 (7.11) 1.37 (34.8) 0.81 (20.6) 0.41 (10.3) 0.09 (2.29) 0.7 (19.1) (88.9) 2.00 (0.8) 2.0 (63.) 1.87 (47.) 1.0 (38.1) 0.28 (7.11) 1.0 (38.1) 0.88 (22.2) 0.0 (12.7) 0.12 (3.0) 0.7 (19.1) 47SS 3. (88.9) 2.00 (0.8) 2.0 (63.) 1.87 (47.) 1.0 (38.1) 0.28 (7.11) 1.0" (38.1) 0.88 (22.2) 0.0 (12.7) 0.12 (3.0) 0.7 (19.1) G-6

57 Signal-Quick Right ngle Fixed rackets ngle rackets I G E F D H atalog No. D E F G H I (29.3) 1.0 (2.4) 1.2 (31.8) 0.48 (12.1) 0.3 (13.) 0.3 (13.) 0.7 (19.1) 0.12 (3.02) 0.22 (.6) (37.3) 1.0 (2.4) 1.38 (34.9) 0.48 (12.1) 0.3 (13.) 0.78 (19.8) 1.0 (2.4) 1.12 (3.02) 0.24 (6.0) (37.3) 1.0 (2.4) 1.38 (34.9) 0.87 (22.1) 0.78 (19.8) 0.78 (19.8) 0.88 (22.2) 0.12 (3.02) 0.26 (6.6) (4.0) 1.0 (38.1) 2.00 (0.8) 1.19 (30.1) 1.13 (28.7) 1.13 (28.7) 1.2 (31.8) 0.12 (3.02) 0.31 (7.9) (69.9) 1.0 (38.1) 2.0 (63.) 1.8 (47.2) 1.0 (38.1) 0.94 (23.8) 1.0 (38.1) 0.12 (3.02) 0.39 (9.9) Signal-Quick Sensor Quick Mounts Sensor Quick Mounts Install tubular proximity sensors with a mount that securely holds and releases a sensor with a quick twist of a single collet-style nut. Speeds installation and replacement procedures. Sensor Quick Mounts can be used as a "smart rest pad" for tooling and fixturing. You can rest castings or work pieces right on your sensors. Sensor Quick Mounts can take the load and adjustments are easy with the threaded housing. Sensors confirm part positioning to initiate machining, welding or other control cycles. ollet-style locknut secures sensor. Integral stop shoulder maintains target gap. Housing protects sensor from physical impact. Sensor change-out is fast. No adjustments required. Target/product can rest on sensor face. reate new applications for sensors. Short or long barrel lengths. Material Specifications racket Material: Stainless Steel Jam nuts Hardened shoulder Material Specifications Material: Nickel-plated brass (body, nuts) Polypropylene (ferrule) Operating Temperature: 300 F (149 ) Sensor Quick Mounts atalog No. D E F SM (8.18) 1.28 (32.4) 0.69 (17.) M12 x (3.8) 0.67 (16.9) SM (12.1) 1.34 (34.0) 0.77 (19.) M16 x (4.01) 0.86 (21.8) SM (18.1) 1.39 (3.3) 0.82 (20.8) M24 x (4.83) 1.18 (30.0) SM (30.1) 1.40 (3.6) 0.81 (20.6) M36 x (.84) 1.61 (41.0) F ollet-style lock nut D E G-7 Signal-Quick Sensor Mounting ccessories Right ngle Fixed rackets and Sensor Quick Mounts

58 (68) - (124) Signal-Quick Sensor Mounting ccessories Signal-Quick Solid State Limit Switches* Solid State Limit Switches ombine the conventional simplicity of limit switches and solid state proximity sensor technology. No contacts to wear out, no wiring. Directly replaces traditional limit switch. Wide selection of operating heads. Specifications Material: Environmental Rating: Operating Temperature: Mechanical Life: * sensor not supplied Fiberglass reinforced plastic IP 66 Suitability -13 to 18 F (-2 to 70 ) 30 million cycles (straight line heads) 2 million cycles (side rotary heads) 10 million cycles (multidirectional heads) Solid State Limit Switches atalog Number Style Description SSLS1SRL 12mm Side Rotary Lever SSLS1SRL 12mm Side Rotary dj. Lever SSLS1SRMR 12mm Side Rotary, Metallic Rod SSLS1SRPR 12mm Side Rotary, Plastic Rod SSLS1TMP 12mm Top Push Metallic Plunger SSLS1TRL 12mm Top Rotary Lever SSLS1TRP 12mm Top Rotary Plunger SSLS1TS 12mm Top Wobble, oil Spring SSLS1TSPT 12mm Top Wobble, oil Spr, Poly Tip Side Rotary, Roller Lever - SSLS1SRL.19 (131.8) 2.48 (63) 2.36 (60) 0.21 (.3) 1.18 (30) 1.61 (41) 0.87 (22.0) 1.18 (30.0) 0.29 (7.3) M12 x (63) 1.63 (41.) Polyamide Roller 0.68 (17.3) Plastic Switch ody 1.09 (2.6) Side Rotary, djustable Roller Lever - SSLS1SRL Side Rotary, Metal Rod - SSLS1SRMR 0.87 (22) Polyamide Roller (3) to (91) 2.28 (8) (278.9) Max (210) Max. Metal Rod 0.12 (3.0) 2.36 (60) Solid State Limit Switches 2.36 (60) (.3) 1.18 (30) 1.61 (41) 0.29 (7.3) 3.8 (90.8) 1.09 (2.6) M12 x (17.3) 1.63 (41.) Plastic Switch ody 2.36 (60) (.3) 0.28 (7.0) 1.18 (30) 1.61 (41) 0.29 (7.3) M12 x (48.) 1.63 (41.) Plastic Switch ody 1.09 (2.6) 0.68 (17.3) G-8

59 Signal-Quick Solid State Limit Switches Side Rotary, Plastic Rod, SSLS1SRPR (278.9) Max (122.8) 2.36 (60) (.3) 2.13 (4) 2.36 (60) 0.28 (7.0) 1.18 (30) 1.61 (41) 0.21 (.3) 1.18 (30) 1.61 (41) 0.87 (22) 0.29 (7.3) 0.29 (7.3) M12 x (60) 1.91 (48.) 1.63 (41.) Plastic Rod Ø 0.2 (6.3) Plastic Switch ody 1.09 (2.6) 0.68 (17.3) Top Push, Roller Lever - SSLS1TRL M12 x (6) 1.63 (41.) 0.63 (16) 0.68 (17.3) Polyamide Roller Plastic Switch ody 1.09 (2.6) Top Wobble, oil Spring - SSLS1TS 7.83 (198.8) 2.36 (60) Ø (.3) 1.18 (30) 1.61 (41).12 (130) 0.29 (7.3) M12 x (41.) 0.68 (17.3) Stainless Steel oil Spring Plastic Switch ody 1.09 (2.6) 4.68 (118.8) Top Push, Metal Plunger - SSLS1TMP 4.17 (10.9) 1.97 (0) 2.36 (60) 1.46 (37) 2.36 (60) (.3) 1.18 (30) (.3) 1.18 (30) 1.61 (41) 1.61 (41) 0.47 (12) 0.29 (7.3) 0.29 (7.3) M12 x 1 M12 x (.08) 1.63 (41.) 1.63 (41.) 0.63 (16) Metal Plunger Plastic Switch ody 1.09 (2.6) 0.68 (17.3) Top Push, Roller Plunger -SSLS1TRP 7.83 (198.8) 2.36 (60) Ø (.3) 1.18 (30) 1.61 (41).12 (130) 0.29 (7.3) M12 x (41.) Steel Plunger w/roller 0.68 (17.3) 0.68 (17.3) Plastic Switch ody Plastic Switch ody 0.6 (14.3) 1.09 (2.6) Top Wobble, oil Spring with Poly Tip - SSLS1TSPT Polyamid Tip Stainless Steel oil Spring G-9 Signal-Quick Sensor Mounting ccessories Solid State Limit Switches

60 Signal-Quick Sensor Mounting ccessories Signal-Quick Stop Screws Stop Screws Jam nuts ttach any standard shielded proximity sensor to the Stop Screw and create a heavy-duty, solid state switch. Spring loaded design triggers the sensor when the piston is displaced. The sensor is isolated from impact and separated from the target with a plastic bushing. Two heavy-duty jam nuts secure the Stop Screw to a flat or 90º bracket. Isolates sensor from impact damage. Heat-treated alloy steel construction. Stop travel and sense with one device. Versatile outputs using any shielded sensor. ccurate and easy adjustments. Specifications Material: Heat-treated, Zinc-plated steel Zinc-plated steel jam nuts Piston travel: (1.93) Spring rate: 9 oz. (22 grams) Max. allowable force: 20 lb-ft (2 KN) Stop Screws atalog No. D E F G SS082 M8 x (2) M8 x (3.16) 0.23 (.84) 0.24 (6.26) 0.0 (12.8) SS080 M8 x (0) M8 x (3.16) 0.23 (.84) 0.24 (6.26) 0.0 (12.8) SS122 M12 x (2) M12 x (4.32) 0.37 (9.40) 0.23 (.94) 0.62 (1.7) SS120 M12 x (0) M12 x (4.32) 0.37 (9.40) 0.23 (.94) 0.0 (1.7) E H Housing Heat-treated Piston D F G Proximity Probes Use Proximity Probes to monitor internal tooling components or for part detection. Reliable and versatile solid state output allows greater control. Spring-loaded probe with Oilite bearing. Reaches into tight areas. ompact and highly adjustable. ccepts standard shielded 8 or 12mm sensors. Stop Screws and Proximity Probes D 1.93 (49.0) (31.8) 1.2 E F Specifications Material: Heat-treated, Zinc-plated Steel Zinc-plated Steel jam nuts Piston travel: ) Spring rate: 9 oz. (22 grams) Max. allowable force: 20 lb-ft (2 KN) Proximity Probes atalog No. D E F PR (7.6) 1.0 (2.4) M8 x 1 M8 x (3.18) 0.1 (13) to a depth of.79 (20) PR (99.6) 2.0 (0.8) M8 x 1 M8 x (3.18) 0.1 (13) to a depth of.79 (20) PR (7.6) 1.0 (2.4) M12 x 1 M12 x (3.18) 0.67 (17) to a depth of.71 (18) PR (99.6) 2.0 (0.8) M12 x 1 M12 x (6.3) 0.67 (17) to a depth of.71 (18) Probe Travel PR082, PR080 - Maximum:.076 (1.93) ctivation varies by sensing range, typically:.00 (0.13) to.01 (0.2) PR122, PR120 - Maximum:.076 (1.93) ctivation varies by sensing range, typically:.010 (.2) to.01 (.38) G-60

61 Signal-Quick Protective aps Protective aps Use thread-on caps or epoxy-on faces to protect proximity sensors from dangerous elements on the plant floor. Reduces and/or eliminates abrasion damage. Reduces downtime & sensor replacement expenses. vailable in ceramic, Derlin and Teflon. Specifications Material: Delrin, Teflon, eramic Operating Temperature: Delrin: 160 F; Telfon: 400 F, eramic: 4172 F Shielded atalog No. Style Description P08T 8mm Teflon 0.22 (.10) 0.43 (10.9) 0.02 (0.1) M8 x 1 P08NT 8mm Non-shielded, Teflon 0.39 (9.7) 0.43 (10.9) 0.02 (0.1) M8 x 1 P12T 12mm Teflon 0.3 (8.90) 0.8 (14.7) 0.04 (0.89) M12 x 1 P12D 12mm Delrin 0.3 (8.90) 0.8 (14.7) 0.04 (0.89) M12 x 1 P12ND 12mm Non-shielded, Delrin 0.60 (1.2) 0.8 (14.7) 0.04 (0.89) M12 x 1 P12 12mm eramic 0.3 (8.90) 0.8 (14.7) 0.04 (0.89) M12 x 1 P18T 18mm Teflon 0.3 (8.90) 0.9 (24.1) 0.0 (1.14) M18 x 1 P18D 18mm Delrin 0.3 (8.90) 0.9 (24.1) 0.0 (1.14) M18 x 1 P18ND 18mm Non-shielded, Delrin 0.70 (17.8) 0.9 (24.1) 0.0 (1.14) M18 x 1 P18 18mm eramic 0.3 (8.90) 0.9 (24.1) 0.0 (1.14) M18 x 1 P30D 30mm Delrin 0.39 (9.90) 1.0 (38.1) 0.08 (2.03) M30 x 1 P30ND 30mm Non-shielded, Delrin 1.0 (2.4) 1.0 (38.1) 0.08 (2.03) M30 x 1 P30T 30mm Teflon 0.39 (9.90) 1.0 (38.1) 0.08 (2.03) M30 x 1 P30 30mm eramic 0.39 (9.90) 1.0 (38.1) 0.08 (2.03) M30 x 1 Non-Shielded G-61 Signal-Quick Sensor Mounting ccessories Protective aps

62 Signal-Quick Sensor Mounting ccessories Signal-Quick End aps and eramic Faces D Shielded 30 Non-Shielded D E 30 End aps Use alone or with ushioned Sensor Mount. eveled edge deflects lateral impacts. Reduces and or eliminates abrasion damage. Reduces downtime and sensor replacement expenses. Specifications Material: Delrin (Non-Shielded) Glass-filled Nylon (Shielded) Polypropylene (E30) End aps atalog No. Style D E Shielded E08 8mm 0.21 (.28) 0.60 (1.2) 0.01 (.38) 0.2 (6.4) N/ M8 x 1 E12 12mm 0.2 (6.3) 0.96 (24.4) 0.01 (.38) 0.4 (11.4) N/ M12 x 1 E18 18mm 0.33 (8.38) 1.23 (31.3) 0.03 (.76) 0.73 (17.) N/ M18 x 1 E30 30mm 0.30 (7.62) 1.72 (43.7) 0.03 (.76) 1.13 (28.6) N/ M30 x 1 Non-Shielded E08N 8mm 0.20 (.08) 0.7 (14.) 0.01 (.38) 0.2 (6.4) 0.37" (9.0) M8 x 2 E12N 12mm 0.2 (6.3) 0.90 (22.9) 0.03 (.76) 0.4 (11.4) 0.68" (17.3) M12 x 1 E18N 18mm 0.33 (8.38) 1.34 (34.0) 0.02 (.64) 0.67 (17.0) 0.70" (17.8) M18 x 1 E30N 30mm 0.31 (7.87) 1.7 (44.) 0.04 (1.02) 1.1 (29.2) 0.90 (22.9) M30 x 1 NOTE: The wear surface thickness (Dimension ) does not reduce a sensor s sensing range, but will consume an equal amount of the gap required between the sensor and target. eramic Faces ond to sensor face with any epoxy. Use when threads are inaccessible. Reduces and or eliminates abrasion damage. Reduces downtime and sensor replacement expenses. Specifications Material: Operating Temperature: eramic 4172 F (2300) eramic Faces atalog No. Style End aps and eramic Faces F08 8mm 0.23 (.80) 0.12 (3.0) F12 12mm 0.41 (10.4) 0.12 (3.0) F18 18mm 0.60 (1.2) 0.02 (.0) F30 30mm 0.98 (27.9) 0.02 (.0) NOTE: The wear surface thickness (Dimension ) does not reduce a sensor s sensing range, but will consume an equal amount of the gap required between the sensor and target. G-62

63 Signal-Quick lock Mounts lock Mounts ond to sensor face with any epoxy. Use when threads are inaccessible. Reduces and/or eliminates abrasion damage. Reduces downtime and sensor replacement expenses. Specifications Material: Glass-filled Nylon nodized aluminum lock Mounts atalog No. Style D E F Metallic M08M 8mm 0.32 (8.0) 0.62 (1.8) 1.0 (2.4) 0.7 (19.0) 0.72 (18.4) 0.14 (3.8) M12M 12mm 0.48 (12.1) 1.0 (2.4) 1. (38.1) 0.7 (19.0) 0.98 (24.9) 0.20 (.08) M18M 18mm 0.71 (18.1) 1.2 (31.7) 1. (38.1) 1.0 (2.4) 1.21 (30.7) 0.18 (4.8) M30M 30mm 1.19 (30.1) 2.0 (0.8) 2. (63.) 1.38 (34.9) 2.03 (1.) 0.26 (6.73) Nylon M08N 8mm 0.32 (8.0) 1.06 (27) 0.63 (16) 0.47 (12) 0.67 (17) 0.18 (4.) M12N 12mm 0.48 (12.1) 1.26 (32) 0.79 (20) 0.47 (12) 0.87 (22) 0.18 (4.) M16N 16mm 0.63 (16.1) 1.42 (36) 1.02 (26) 0.47 (12) 1.02 (26) 0.18 (4.) M18N 18mm 0.71 (18.1) 1.42 (36) 1.02 (26) 0.47 (12) 1.02 (26) 0.18 (4.) M20N 20mm 0.79 (20.1) 1.77 (4) 1.18 (30) 0.9 (1) 1.26 (32) 0.22 (.) M22N 22mm 0.87 (22.1) 1.77 (4) 1.18 (30) 0.9 (1) 1.26 (32) 0.22 (.) M30N 30mm 1.18 (30.1) 2.17 () 1.0 (38) 0.71 (18) 1.6 (42) 0.22 (.) M36N 36mm 1.42 (36.1) 2.40 (61) 1.73 (44) 0.71 (18) 1.89 (48) 0.22 (.) Metallic D ½ D ½ F E Nylon D ½ E F G-63 Signal-Quick Sensor Mounting ccessories lock Mounts

64 Signal-Quick Sensor Mounting ccessories Signal-Quick Universal iming rackets 0.79 (20.1) 0.81 (20.6) 1.12 (28.6) 0.79 (20.1) 0.81 (20.6) 1.12 (28.6) racket, Standard 2.2 (7.2) racket, Extended 3.38 (8.9) 2.0 (0.8) 2.6 (66.0) 0.80 (20.3) 2.28 (7.9) 0.80 (20.3) 1.1 (29.2) 2.0 (0.8) 0.28 (7.08) 2.6 (66) Universal iming rackets ttach limit switch style (30mm threaded base) or threaded barrel photoelectric and ultrasonic sensors. chieve secure mounting quickly and with ease. Swivel action for aiming simplicity. Durable glass-filled nylon construction. Regular or extended base models. Sizes for 12, 18 and 30mm threaded sensors. Specifications Material: Glass-filled Nylon Universal iming rackets atalog No. Style Description U12 12mm racket M12 x 1 U12E 12mm racket, Extended ase M12 x 1 U18 18mm racket M18 x 1 U18E 18mm racket, Extended ase M18 x 1 U30 30mm racket M30 x 1. U30E 30mm racket, Extended ase M30 x (7.08) onversion rackets llows 12mm and 18mm sensors to replace a wide variety of standard limit switches. Simple to secure with a set screw. buse resistant glass filled nylon material. Specifications Material: Glass-filled Nylon onversion rackets atalog No. Sensor Style D 12 12mm 0.47 (12.1) 1.7 (40) 0.62 (1.8) 0.98 (2) 18 18mm 0.71 (18.1) 1.77 (4) 0.87 (22) 1.18 (30) Set screw Universal iming rackets 0.30 (7.) D 0.21 (.4) 1.7 (40.0) G-64

65 Signal-Quick Well Mounts Well Mounts dapt tubular proximity sensors to a wide variety of vessels for level detection applications. Keep systems sealed prior to sensor installation, as well as during sensor removal. Reliability and performance is improved because the sensor is isolated from the system fluids/materials. Delrin, UHMW and Teflon models. ccommodates all sensor diameters. Types include flange mount, SE and NPT threads. Well Mounts atalog No. Style Description D E F G H I NPT WMPTS12D 12mm PTS, Delrin 1.7 (44.) 1.30 (33) 1.0 (26.7) 0.36 (9.14) 0.03 (.76) 0.70 (17.8) 0.99 (2.1) 1.2 (31.8) 0.48 (12.1) ½ x 14 WMPTS18D 18mm PTS, Delrin 2.3 (9.7) 1.90 (48.3) 1.3 (38.9) 0.6 (16.) 0.06 (1.2) 0.89 (22.6) 1.24 (31.) 1.47 (37.3) 0.71 (18.1) ¾ x 14 WMPTS30T 30mm PTS, Teflon 2.3 (9.7) 1.90 (48.3) 1.3 (38.9) 0.6 (16.) 0.06 (1.2) 1.44 (36.6) 1.7 (44.) 1.7 (44.) 1.19 (30.1) 1¼ x 11. WMSES18D 18mm SES, Delrin See diagram WMHS30D 30mm HS, Delrin See diagram WMTT30T 30mm TT, Teflon See diagram WMFMS30H 30mm FMS, UHMW See diagram Specifications Material: PTS, SES, HS style: Delrin, stainless steel band clamps, neoprene o-ring TT style: Teflon, stainless steel band clamps, neoprene o-ring Flange style: UHMW-PE (body), stainless steel band clamps, neoprene o-ring Max. allowable PSI: (24.1) 0.06 (1.2) 0.90 (22.9) 1.06 (26.9) 2.3 (9.7) 1.9 (48.3) 1.3 (38.9) 0.70 (17.8) 1.94 (49.3) WMSES18D O-ring 0.0 (1.27) 1.3 (34.3) 1.97 (0) 1.47 (37.3) WMTT30T and clamp 1.74 (44.2) M30x (31.) 0.72 (18.3) WMPTS12D, WMPTS18D, WMPTS30T E F 0.70 (17.8) 0.20 (.08) O-ring 0.36 (1.2) 1.3 (34.3) 0.1 (3.81) 2.90 (73.7) D 2.3 (9.7) 1.9 (48.3) 1.3 (38.9) 1.70 (43.2) 0.36 (9.24).0 (127) H and clamp WMHS30D 1.96 (0) and clamp WMFMS30H and clamp G 1.74 (44.2) 1.18 (30.1) I 1.19 (30.1) 0.41 (10.3) 2.0 (63.) Signal-Quick Sensor Mounting ccessories Well Mounts G-6

66 Signal-Quick Sensor Mounting ccessories Signal-Quick Sight Glass Mounts F E D G Sight Glass Mounts Quickly attach tubular proximity sensors to glass and plastic indicator tubes for level detection. Rapid out of tank adjustments. Simple sensor change-out/replacement. For 9.mm (3/8") to 44mm (1¾") tubes. Stainless steel and Delrin onstruction. Specifications Material: Delrin (body), stainless steel (hardware) Pipe Range: 3/8-1¾ onduit dapter atalog No. Style D E F G SGM12D 12mm 0.48 (12.2) 0.77 (19.6) 1.0 (38.1) 1.16 (29.) 0.1 (13) 0.42 (10.) ( ) SGM18D 18mm 0.71 (19.6) 1.0 (2.4) 1.7 (44.) 1.0 (38.1) 0.63 (1.9) 0.46 (11.7) ( ) SGM30D 30mm 1.19 (30.1) 1.4 (36.8) 2.7 (69.9) 2.67 (67.8) 1.2 (31.8) 0.7 (19.1) " ( ) Signal-Quick onduit dapters onduit dapters Seal your sensor and the cable in conduit for harsh environments. One end is threaded for 1/2" conduit and the other for standard 12, 18 or 30mm sensors. Round steel or Hex aluminum styles. Fully threaded to accommodate all sensors. Sight Glass Mounts and onduit dapters Round body 2.1 (0.99) Hex body 16. (0.6) Specifications Material: Zinc-plated Steel (round) luminum (hex) onduit dapter atalog No. Sensor Style Description R12 M12 Round onduit dapter M12 x (17.) 1.97 (0) H12 M12 Hex onduit dapter M12 x (2.1) 1.97 (0) R18 M18 Round onduit dapter M18 x (21.3) 2.18 (.4) H18 M18 Hex onduit dapter M18 x (2.1) 2.18 (.4) R30 M30 Round onduit dapter M30 x (33.3) 2.68 (68.1) H30 M30 Hex onduit dapter M30 x (34.9) 2.68 (68.1) Round Hex G-66

67 Hose and able Protection Systems abletrak Hose and able arrier System Features and enefits Hubbell Wiring Device-Kellems abletrak flexible hose and cable carrier system is designed to provide guidance and protection for hose and cables on moving machinery. abletrak keeps hose and cable from getting caught in moving machine parts and minimizes friction between cable and hose components resulting in reduced downtime and maintenance costs. These carriers are able to perform at high speeds, have excellent chemical and corrosion resistance, require little maintenance and are easy to assemble. G-67 Hose and able Protection Systems abletrak Hose and able arrier System

68 Hose and able Protection Systems Hose and able Protection Systems abletrak Hose and able arrier System ssembly and Installation The design of abletrak carriers provides easy access to components during installation and repair. The track s flip top design allows the installer to lay cable and hose components directly into the track instead of pulling them through the length of the track. Hubbell abletrak carriers can be ordered as assembled kits with brackets or by the foot without brackets. The final length of the track is easily customized by adding or removing sections of track or individual links with a flat head screwdriver. abletrak Installation 1. Unlock Tab 2. Locking tabs secure the retaining bar into place. To unlock tabs, slide a flat head screwdriver under the tab and release it with a twisting motion. ccess/install ables & Hoses 3. Easy access is important, especially for pre-assembled cable/hose sets involving large O.D. plugs, receptacles, and couplings. 4. Lock Tab. To re-secure retaining bars, engage the hinge and snap the locking tab into place. abletrak Hose and able arrier System G-68

69 Hose and able Protection Systems abletrak Hose and able arrier System Ordering Information TRVEL End Mounting: Track travel length = Machine travel length. M P atalog Numbers Track W H Max Max V O R K M P L* abletrak Kit Length Inner Inner Hose/ab omponent Outer Outer end end Min rkt rkt to urve w/ rackets (ft) Width Height O.D. Width Width Height Radius Height learance to end Pivot Pitch Length (ft) HT10114K** HT10219K** HT16119K HT16134K HT16219K HT16234K HT16334K HT16434K HT2134K HT2234K HT2247K HT2347K atalog Numbers Track W H Max Max V O R P L* abletrak Kit Length Inner Inner Hose/ab omponent Outer Outer end end urve w/o rackets (ft) Width Height O.D. Width Width Height Radius Height learance Pitch Length (ft) HT101141** HT102191** HT HT HT HT HT HT HT HT HT HT *L = Minimum length in feet to form abletrak curve. ** These models do not have a flip top design and do not accept separators due to their small size. R K V W H O Hose and able Protection Systems abletrak Hose and able arriers G-69

70 Hose and able Protection Systems Hose and able Protection Systems abletrak Hose and able arrier System ccessories Track Travel of SI KIT () = 3 ft. Window Opening EXTENDERS (D) Track Travel with EXTENDERS (D) when inserted increases travel by 1 ft. enter Mount Travel = 2 x SUM of KITS SUM OF KITS SUM OF KITS Fixed Point End/enter Mounting ENTER MOUNTING: Mounting the fixed track end in the center of the machine travel allows the track to travel beyond the fixed end. enter mounting effectively doubles the travel distance of the track requiring half the track length of an end mounted application. alculating Physical Track Length enter Mount (Stationary bracket mounted in center of travel range): Track Length = (MT/2) + L End Mount (Stationary bracket mounted off center of travel range): Track Length = (MT/2) + L + offset from center in feet MT = Total machine travel distance in feet L = Length of track taken up by the bend radius ustomizing Track Length Hubbell abletrak is easily customized by adding or subtracting links to the track. abletrak kits provide 4 to feet of track with brackets pre-installed. Track length can be increased by installing the required number of extenders to reach the required length. To further tune the length of track, individual links can be added or removed. To determine the number of links to add or remove, divide the length in inches to be added or subtracted by the pitch of the track and round up. abletrak Hose and able arrier System abletrak ccessories H racket Kits For Use With D E F G H HTK101 HT Series (10.16) (20.7) (11.94) (23.88) HTK102 HT Series (11.18) (30.99) (11.18) (34.29) HTK161 HT Series (2.1) (0.0) (22.10) (46.74) (30.23) (7.14) (19.0) (20.7) HTK162 HT Series (4.21) (69.8) (41.91) (66.80) (30.23) (7.14) (19.0) (20.7) HTK163 HT Series (6.28) (90.17) (61.98) (86.87) (30.23) (7.14) (19.0) (20.7) HTK164 HT Series (90.42) (11.06) (88.14) (112.01) (30.23) (7.14) (19.0) (20.7) HTK21 HT Series (2.83) (81.3) (4.72) (76.96) (44.4) (8.74) (2.40) (31.7) HTK22 HT Series (9.00) (123.70) (87.88) (119.13) (44.4) (8.74) (2.40) (31.7) HTK23 HT Series (14.43) (183.13) (147.32) (178.6) (44.4) (8.74) (2.40) (31.7) Separators For Use With D E F HTSP16PK12 HT16_ Series (31.0) (20.83) (23.88) (6.86) (3.6) (12.70) HTSP2PK12 HT2_ Series (1.6) (2.40) (30.23) (8.89) (3.81) (1.7) HTK161 HTGK23 rackets F F G G Female E H D Male E.78 (14.68).22 (.9) HTK102 rackets.40 (10.16) Female.22 (.9) 1.33 (33.78) 1.02 (2.91) D.78 (14.68).22 (.9).40 (10.16) Male.22 (.9) 1.33 (33.78) 1.02 (2.91).22 (.9).78 (14.68) D Female.22 (.9) 1.33 (33.78) 1.02 (2.91) Separators HTK101 rackets.22 (.9).78 (14.68) F Male E D.22 (.9) 1.33 (33.78) 1.02 (2.91) G-70

71 Hose and able Protection Systems abletrak Hose and able arrier System Mounting Options and Specifications Specifications ack-up Surface Material Operating Temperature Maximum Operating Speed Maximum Unsupported Travel Distance pplications Fixed End Fixed End ombination Horizontal & Vertical Travel Fixed End urve Up ack-up Plate Horizontal Travel Fixed End Vertical Travel Fixed Ends ack-up Plate Opposed Travel urve Down Fixed End ack-up Surface Fiberglass reinforced nylon ontinuous +20 F +100 F (-7 38 ). *Intermittent -40 F +220 F ( ). 600 FPM (feet per minute), 180 MPM (meters per minute). Operating speed is based on short lengths that are self supported (up to 9ft.). HT16 Series without sag 9 ft. (2.7m) With sag 10. ft. (3.2m). HT2 Series without sag 13. ft. (4.1m) With sag 17 ft. (.18m). Machine tool, robotic automation, material handling. *Intermittent refers to the operating of the product outside the normal (continuous operating) temperature range momentarily before returning back to the normal range. G-71 Hose and able Protection Systems abletrak Hose and able arrier System

72 DIN Rail Utility ox DIN Rail Utility ox 1 and 20 mpere omplete Units and omponent Parts Hubbell's DIN Rail Utility ox offers a labor saving way to provide utility power to any control cabinet. Installing the Rail Utility ox is as easy as snapping the box onto a 3mm DIN Rail and connecting the line, neutral and ground wires to the terminal block. Utility power for fans, lights, laptop computers, testers or any other need is now at your disposal. If load limiting is a concern, Hubbell's "" version comes with a mp circuit breaker that provides over-current protection to make sure that large loads are not drawn from the DIN Rail Utility ox. ll Hubbell DIN Rail Utility oxes are available in gray and may be mounted either vertically or horizontally on the DIN Rail; the "H" version comes with the terminal block mounted for easy wiring when the DIN Rail Utility ox is mounted horizontally. G W G W NEM -1R 1 12V UL S 0. HP NEM -20R 20 12V UL S 1 HP DRU1 Duplex Receptacles Description olor atalog Numbers omplete Unit Gray DRU1 DRU20 omplete Unit- Horizontal Mount Gray DRU1H - omplete Unit w/ ircuit reaker Gray DRU1 - omplete Unit w/ ircuit reaker- Horizontal Gray DRU1H - omplete Unit w/ux Gray - DRU20 omplete Unit w/ux and ircuit reaker Gray - DRU20 omplete Unit w/ 6-1R Duplex Gray DRU462* NOTE: * DRU462 configuration not pictured DRUGFI1 GFI Duplex Receptacles Description olor atalog Numbers omplete Unit Gray DRUGFI1 DRUGFI20 omplete Unit- Horizontal Gray DRUGFI1H - omplete Unit w/ ircuit reaker Gray DRUGFI1 - omplete Unit- w/ ircuit reaker- Horizontal Gray DRUGFI1H - omplete Unit- with ux GFI ontacts Gray DRUGFI1 DRUGFI20 omplete Unit-Faceless w/ux GFI ontacts Gray DRUGFI20F - TVSS Duplex Receptacles Description olor atalog Numbers omplete Unit Gray DRUTVSS1 - DRUTVSS1 Isolated Ground Duplex Receptacles Description olor atalog Numbers omplete Unit Gray DRUIG1-1 and 20 mp Versions DRUIG1 Toggle Switch Unit Description olor atalog Numbers HL1221 in omplete Unit w/ux Gray DRU omplete unit with SW/RE Gray DRU DIN Rail Utility ox omponents Description olor atalog Numbers Prewired Kit Without ircuit reaker Gray DRUKIT Prewired Kit With ircuit reaker Gray DRUKIT Prewired Kit With ux Gray DRUKIT Prewired Kit With ircuit reaker and ux Gray DRUKIT Switch Plate Only Gray KP1GY Rectangular Opening Plate Only Gray KP26GY 1.60 Opening Plate Only Gray KP720GY 1.40 Opening Plate Only Gray KP7GY Duplex Receptacle Plate Only Gray KP8GY G-72

73 OEM Surge Protection DIN Rail and Terminal Mounted 40,000 & 6,000 Peak mperage apacity OEM/Specialty Surge Protection The SpikeShield offering includes a selection of hard-wired surge suppressors that can be internally mounted inside equipment cabinets. The DR series are DIN Rail mounted, provide 6,000 peak amp capacity and are parallel wired. The TDR series come with an integral DIN Rail mounting system and a set of attachable mounting feet that allows the device to be flange mounted. The TDR models provide 40,000 peak amp capacity, up to -7d of noise filtration and are series wired. Load ratings of, 1, and 20 amps are available in the 120-volt model and may be ordered with or without a set of dry contacts for remote signaling capability. oth products are ideal for panel builders, manufacturers and integrators of control or instrumentation cabinets for industrial, medical or commercial applications. HL1DR6 OEM Surge Protection TDR Features enefits -7d Noise filtration. Protects sensitive electronics from electrical noise that is prevalent in most manufacturing facilities. 40k peak current rating. Prevents transients from destroying or degrading electronics on the plant floor. Optional dry contacts. ll models may be ordered with a set of dry contacts for remote signaling capability. Installation flexibility. The TDR products may be DIN Rail mounted to any standard 3mm DIN Rail or flange mounted by attaching the four mounting feet that come with each unit. Notes: DIN rail and terminal mounted products are UL recognized in accordance with Standard DIN Rail Mounted, Parallel-Wired (DR Series) Voltage Single Phase 120V Single Phase 240V Notes: *For international applications. For technical information, see page J-18. atalog Numbers HL1DR6 HL2DR6* DIN Rail/Flange Mounted, Series Wired (TDR Series) atalog Numbers atalog Numbers Rating Without Dry Relay ontact With Dry Relay ontact, 120V HL1TDR7 HL1TDR7D 1, 120V HL1TDR71 HL1TDR71D 20, 120V HL1TDR720 HL1TDR720D 20, 230V - HL2TDR720D* Note: *For international applications. HL1TDR7 G-73

74 Plugs, Patch ords and Enclosures Industrial Ethernet and Harsh Environment onnectors ategory 6 and e component connectors Housing made from high impact polymer IP67 rated - sealed connection O-Rings for moisture protection Standard Hubbell Keystone Latching System Industrial/Manufacturing Medical Harsh Environment Oil/Mining Industrial Ethernet and Harsh Environment onnectors Hubbell's Industrial Ethernet System provides leading edge ategory e and 6 network transmission performance suitable for industrial and other harsh environments. This system incorporates the use of our standard data connectivity jacks which feature our keystone latching mechanism, in a rugged sealed housing providing IP67 rated protection. Extend your LN to include automation equipment and manufacturing or process control equipment. Utilize the Hubbell system to provide added protection in harsh environments such as convention centers, food processing plants, outdoor billboards and display screens, medical and other environments which require added protection from moisture, corrosion, dust-debris, vibration and chemicals. Industrial Ethernet onnectors Description at e onnector atalog No. HLIEE Description at e Shielded onnector atalog No. HLIEES Description at e Inline oupler onnector atalog No. HLIEE Description at 6 onnector atalog No. HLIE6 Industrial Ethernet Environmental Specifications Moisture Protection UL Type 4X, IP67 Temperature Range NSI/TI/EI: 60 (140 F) to -10 (14 F) Materials Nose ontacts: eryllium opper base metal with a minimum of 0 micro-inch gold plating over nickel underplating ID 110 ontacts: Phosphorus bronze base metal with 100 micro-inch tin lead 60/40 plating over nickel underplating Listings and Verifications NSI/TI/EI UL Listed, S ertified Materials onnector Housing Noryl (UL 94V-0) Termination Towers UL 94V-0 Termination/Stuffer ap Lexan (UL 94V-0) Performance Specifications onfirmed contact performance over full range of (F Specification) deflection limits mating cycles 100 grams minimum normal force per contact, using F-approved plug ID accommodates 22 to 26 WG/Solid 10X ID terminations for same size WG G-74

75 Industrial Ethernet and Harsh Environment onnectors Plugs, Patch ords and Enclosures Industrial Ethernet Patch ords and Plugs HLIEE0EE HLIEE0E HLIEE0 Description Length atalog No. atalog No. atalog No. IE e Patch ord HLIEE0EE HLIEE0E HLIEE0 IE e Patch ord 10 HLIEE10EE HLIEE10E HLIEE10 IE e Patch ord 1 HLIEE1EE HLIEE1E HLIEE1 IE e Patch ord 20 HLIEE20EE HLIEE20E HLIEE20 IE e Field Termination Plug - HLEF ontact ustomer Service for specialized cords and connectors - lead times may apply. Plugs, Patch ords and Enclosures Industrial Ethernet Wall Plates and ccessories Description Gang Openings atalog No. Wall plate, stainless steel 1 1 HLIE11 Wall plate, stainless steel 1 2 HLIE12 Wall plate, stainless steel 2 2 HLIE22 Wall plate, stainless steel 2 4 HLIE24 onnector ap - - HLIE HLIE Industrial Ethernet REOX Enclosure Use the unloaded REOX in harsh applications such as a manufacturing floor. The modular design of this cabinet is very versatile, allowing the installer to configure the cabinet with a wide variety of accessories to mount any type of components. Use the pre-configured REOX as a small remote data center in an industrial environment. Each cabinet includes dedicated mounting for hubs and other active equipment and another dedicated mounting area for patch panels. Delivery: 1 enclosure Pre-onfigured versions include: REK19 - ottom Hinged Patch Panel racket, 4U REKZ - Equipment Mounting racket, U Rack Units Height Width Depth Version olor atalog No (610) 24 (610) 12 (30) Unloaded Gray HLIR2UG (914.4) 24 (610) 12 (30) Unloaded Gray HLIR3UG (1219.2) 24 (610) 12 (30) Unloaded Gray HLIR4UG (914.4) 24 (610) 12 (30) Pre-onfigured Gray HLIR3PG (1219.2) 24 (610) 12 (30) Pre-onfigured Gray HLIR4PG G-7 Industrial Ethernet

76 Industrial onnectivity and ontrol Products Industrial onnectivity and ontrol Products ccessories ccessories Hubbell offers the broadest line and widest choice of cord connectors to complete your installation of Mini-Quick ontrol onnectors. Hubbell ord onnectors feature our patented GOTH Ring technology to prevent friction and provide superior strain relief. Our ord onnectors are IP66 and come in a variety of materials to meet your environmental needs. Machined Zinc Plated Steel Machined luminum Nylon IP 66* Suitabilty ord onnectors- Straight Male ord NPT Form Zinc Machined Nylon Nylon Metal lad Range Hub Size Size Plated Steel luminum Gray lack O-Ring /2 F2 SH1021ZP SH1021 SH1021R SH2021R /2 F2 SH1022ZP SH1022 SH1022R SH2022R /2 F2 SH1023ZP SH1023 SH1023R SH2023R /2 F2 SH1024ZP SH1024 SH1024R SH2024R /2 F2 SH1027ZP SH Low Profile ord onnectors ord NPT Gray lack Natural Nylon Range Hub Size (mm) Nylon Nylon Locknuts /8 ( ) SE38G SE LPK /2 ( ) SE0G SE LPK /4 ( ) SE7G SE LPK ( ) SE100G SE LPK0 ccessories Notes: See Section T for the full line of Hubbell premium cord connectors. atalog numbers with PK0 suffix are packed 0 per carton. G-76