Dynamic Series Connectors

Transcription

1 3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available, standard 2.0 mm, high voltage 2.5 mm, and a 3.5 mm branching type, depending on line size, various voltages and other factors. In the future this lineup will be expanded accordin demand. tin plated type that maintains high reliability has been made available in consideration of cost performance. Using this type can help reduce costs, depending on the environment and other conditions. Dynamic Series onnectors Features Feature 1 (hangeable die set crimping hand tool) rimping hand tool is changeable die set structure. It can reduce the lead time for delivery, offer minimal installation tooling cost. This tooling system will evolve to other Dynamic product, D-2000, D-3000, and D-000 series in the future plan. Feature 2 (Wide range applicable cable) D-1000 series receptacle and tab contact have wide applicable wire range that can apply for #30 through #1 with 2.2mm of outside diameter maximum. It means you can use it for electrical cabinet without special thinking. Feature 3 Extensive series lineup ) Housing products D-1000 series consists of D-1100 series for 2.0mm pitch center line, D-1200 series for 2.5mm pitch center line as standard type. In addition, there also lines up D-1500 series for 3.5mm pitch sensor application or branch connection of power line. ) ontact products D-1000 series has gold plating contact as standard products and also Tin plating contact for economical market needs. ou can choose the contact depending on specification, application, quality level and cost so that you can utilize D-1000 series at several places in equipment. Other feature (asic Dynamic series features) Header connector and tab connector have enough length from the tip of contact to top of its housing. It prevents contact from bending that sometimes happens when receptacle mating to tab connector, because it begins the first time for contacts to start connects when housings align each other. D-1000 has housing lance structure. Without contact lance, it is expected to avoid contact lance broken in terminal process handling. lear identification of circuit number provides correct wiring. Metal retention leg assembled tab header prevents from unexpectedly cable tension. Housing lock design is offering no wire scratching.

2 Dynamic Series onnectors D-1000 Series Specifications and Standards Performance Specifications Positions/wire size/current rating Item Series D-1100 D-1200 D-1500 Pitch 2.0mm 2.5mm 3.5mm Voltage Rating urrent Rating (Max) ontact Resistance Dielectric Withstanding Voltage Temperature Range 125V /D 250V /D 250V /D :3 :5 :5 When using WG1 wire WG22 wire 20mΩ Max. (Final) 1,000V 1,500V 1,500V D-1100/1200/1500 Series Wire Size (WG) Specifications and Instruction Sheet Product Specification ( plated) (Tin plated) pplicatio n Specification Hand Tool Part Number: Hand Tool Part Hand Tool Number: Instration Hand Tool Part Sheet Number: Hand Tool Part Number: Extraction Tool : Specifications Series Product Specification UL File No.E276 S Report No.LR719 TÜV Voltage Rating 125V / D Description Material Finish Receptacle ontact Tab ontact P Tab Post Housing opper alloy opper alloy D-1100 D-1200, D-1500 urrent Temperature Voltage urrent Temperature Rating Rating Rating Rating Rating 3 (1) Determined Determined by needs of by needs of machine used machine used V / D 5 (1) Determined Determined by needs of by needs of machine used machine used plated(0.3 m) over Nickel plated(1.27 m) plated(0.3 m)over Nickel plated( m) Tab Post Tin plated(2.0 m) UL9V-0, Grass filled thermoplastic Polyester (PT) Safety Specifications Don't fail to obtain Instruction Sheets when you choose to use these tools. Orders can be placed through our online catalogs also. The safety specifications listed below are approved on specific part numbers. ontact our Sales Department to check if the part numbers you use are approved or not. Keep in mind that there are instances where values differ from those given by Product Specification V /D 3 250V /D 5 125V / D WG (1) V / D Material and Finish WG (1) Some part numbers are not available yet. For more information, contact our Sales Department Wire to oard onnectors 39

3 Dynamic Series onnectors D-1000 Series List of Dynamic Series Products by pplication D-1100S 1-Row Type D-1100S oard-mounting (Refer to P.352) D-1100D oard-mounting (Refer to P.353) D-1100D 2-Row Type D-1100D oard-mounting (Refer to P.353) D-1100D (Refer to P.353) D-1100D Panel Type (Refer to P.353) D-1100D Receptacle Housing (Refer to P.353) D-1200S 1-Row Type D-1200S (Refer to P.356) D-1100D (Refer to P.353) D-1200D 2-Row Type D-1200D oard-mounting (Refer to P.357) D-1200S (Refer to P.356) D-1200D (Refer to P.357) D-1200D (Refer to P.353) D-1200D Panel Type (Refer to P.357) D-1200D oard-mounting (Refer to P.357) oard-mounting (Refer to P.360) 3-Row Type D-1200D Receptacle Housing (Refer to P.357) (Refer to P.360) oard-mounting (Refer to P.360) D-1200S (Refer to P.356) (Refer to P.360) (Refer to P.361) Junction ox D-1200S oard-mounting (Refer to P.356) Panel-Mounting (Refer to P.361) 350 Panel-Mounting (Refer to P.361) Receptacle Housing (Refer to P.361)

4 D-1 ontact rimp Type Dynamic Series onnectors Receptacle ontact (Used on ) Tab ontact (Used on ) pplicable ontact Wire Wire Ins. Wire DiameterRange Receptacle ontact Tab ontact WG mm 2 mm Mark Plated Tin Plated Plated Tin Plated Tool Mini-pplicator Hand Tool 1 (Dies Only) ~1.2 S ~1.6 M 1.0~1.9 L 1.~2.2 2L Strip Form Loose Piece Strip Form Loose Piece Strip Form Loose Piece Strip Form Loose Piece Note: Minimum order quantity is provided. When ordering, specify your requirements by multiplying the quantity. (For more information, contact our Sales Department.) plated : 0.3 m Tin plated : 2.0 m Mini-pplicators are for use with automachines. (For more information, contact our Sales Department.) Extraction tool : Strip Form contacts are for use with Mini-pplicators (automachines) and Loose-Piece contacts are for Hand tools. The contacts L and 2L do not fit into the D-1100 receptacle housing. 1 With Dies 2 Hand Tool (ERTI-RIMP2) with Flip Locator Keying Plug : Wire to oard onnectors The receptacle contacts can be used with all of the receptacle housings, and tab contacts can be used with all of the tab housings. See from page 37 for details on applicable tools. 351 Note: ll s are RoHS compliant.

5 D-1100S Standard 1 Row Type hart Dynamic Series onnectors (Panel Type) () oard-mounting Tab Header () () 10 olor Keying Plating oard-mounting Tab Header Panel Type lack Tin lack Tin lack lack lack Tin lack Tin Information about related products pplicable ontact...refer to P.351 Performance Specifications...Refer to P.39 Mating 1..5 oard-mounting Tab Header Keying Plating lack lack lack lack lack lack Keying Plating lack Tin lack Tin lack lack lack Tin lack Tin Note: ll s are RoHS compliant.

6 D-1100D Standard 2 Row Type hart Dynamic Series onnectors (Panel Type) () oard-mounting Tab Header () () Panel Type oard-mounting Tab Header olor Keying Plating 10 lack lack lack Natural ellow Tin lack Natural Tin lack Refer to P.361 SMT 2 lack Red Tin lack Tin Natural Tin ellow Tin lack Natural Tin Red Tin lack lack lack Tin lack Natural Tin ellow Tin Red Tin Wire to oard onnectors Information about related products pplicable ontact...refer to P.351 Performance Specifications...Refer to P Note: ll s are RoHS compliant.

7 D-1100D Standard 2 Row Type Mating Dynamic Series onnectors Horizontal/ Panel Type Keying Plating 10 lack lack lack Natural ellow lack Natural lack lack Red lack Natural ellow lack Natural Red lack lack lack lack Natural ellow Red Keying Plating 22 lack lack lack lack lack lack Keying Plating 22 lack lack lack lack lack lack Note: ll s are RoHS compliant.

8 Dynamic Series onnectors D-1100D Standard 2 Row Type oard-mounting Tab Header Keying Plating olor SMT Type 10 lack lack lack lack Tin ellow lack Tin Natural oard-mounting Tab Header Keying Plating olor 10 lack lack Natural Tin ellow lack Tin Natural lack Tin Red lack Tin lack Tin Natural Tin ellow lack Tin Natural Tin Red lack lack lack Tin lack lack Tin Natural Tin ellow Tin Red Wire to oard onnectors 26 0 Keying Plating olor lack lack lack lack Note: ll s are RoHS compliant.

9 D-1200S High-Voltage 1 Row Type hart Dynamic Series onnectors (Panel Type) () oard-mounting Tab Header () () 2 olor Keying Plating oard-mounting Tab Header Panel Type lack Information about related products pplicable ontact...refer to P.351 Performance Specifications...Refer to P.39 Mating oard-mounting Tab Header Keying Plating olor 2 lack Keying Plating olor 2 lack Keying Plating olor 2 lack Note: ll s are RoHS compliant.

10 D-1200D High-Voltage 2 Row Type hart Dynamic Series onnectors (Panel Type) () oard-mounting Tab Header () () olor Keying Plating oard-mounting Tab Header Panel Type lack Tin Natural ellow lack Natural ellow lack lack Tin Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Tin Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow Wire to oard onnectors Information about related products pplicable ontact...refer to P.351 Performance Specifications...Refer to P Note: ll s are RoHS compliant.

11 D-1200D High-Voltage 2 Row Type Dynamic Series onnectors Mating Panel/ Horizontal/ Panel Type Keying Plating olor lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow Keying Plating olor lack lack lack lack lack Keying Plating olor lack lack Natural lack Natural lack lack lack Note: ll s are RoHS compliant.

12 Dynamic Series onnectors D-1200D High-Voltage 2 Row Type oard-mounting Tab Header Keying Plating olor lack Tin lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Tin lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow Keying Plating olor lack Natural ellow lack Natural ellow lack Tin lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow lack Natural ellow Wire to oard onnectors SMT Type oard-mounting Tab Header Keying Plating olor 12 lack Note: ll s are RoHS compliant.

13 Dynamic Series onnectors High-Voltage Modular 3 Row Type hart (Panel Type) () oard-mounting Tab Header () () oard-mounting Tab Header olor Keying Plating Panel Type 3 lack lack lack lack lack Information about related products pplicable ontact...refer to P.357 Performance Specifications...Refer to P.355 Mating Horizontal/ 1.5 Keying Plating olor 3 lack lack lack lack oard-mounting Tab Header Keying Plating olor 3 lack lack lack lack Keying Plating olor 6 lack Panel Type oard-mounting Tab Header 360 Keying Plating olor 6 lack lack lack lack Keying Plating olor Note: ll s are RoHS compliant. 3 lack lack lack lack

14 Junction ox hart Dynamic Series onnectors () Panel Mount () ccessory (DIN Foot attachment) * olor Keying Plating Panel Mount ccessory DIN rail attachment kit 3 lack lack The following items are in the DIN rail attachment kit. Vertical pull-out type panel mount x 1 DIN rail attachment x 1 M3 fixing screws x Information about related products pplicable ontact...refer to P.351 Performance Specifications...Refer to P.39 Wire to oard onnectors Keying Plating olor Panel Mount 3 lack lack Keying Plating olor 3 lack ccessory DIN Foot attachment kit Keying Plating olor 3 lack Keying Plating olor lack Note: ll s are RoHS compliant.